|  | /* | 
|  | * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> | 
|  | * Copyright 2008 Juergen Beisert, kernel@pengutronix.de | 
|  | * | 
|  | * Based on code from Freescale, | 
|  | * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * as published by the Free Software Foundation; either version 2 | 
|  | * of the License, or (at your option) any later version. | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA. | 
|  | */ | 
|  |  | 
|  | #include <linux/err.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/irqdomain.h> | 
|  | #include <linux/irqchip/chained_irq.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/basic_mmio_gpio.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/module.h> | 
|  | #include <asm-generic/bug.h> | 
|  |  | 
|  | enum mxc_gpio_hwtype { | 
|  | IMX1_GPIO,	/* runs on i.mx1 */ | 
|  | IMX21_GPIO,	/* runs on i.mx21 and i.mx27 */ | 
|  | IMX31_GPIO,	/* runs on i.mx31 */ | 
|  | IMX35_GPIO,	/* runs on all other i.mx */ | 
|  | }; | 
|  |  | 
|  | /* device type dependent stuff */ | 
|  | struct mxc_gpio_hwdata { | 
|  | unsigned dr_reg; | 
|  | unsigned gdir_reg; | 
|  | unsigned psr_reg; | 
|  | unsigned icr1_reg; | 
|  | unsigned icr2_reg; | 
|  | unsigned imr_reg; | 
|  | unsigned isr_reg; | 
|  | int edge_sel_reg; | 
|  | unsigned low_level; | 
|  | unsigned high_level; | 
|  | unsigned rise_edge; | 
|  | unsigned fall_edge; | 
|  | }; | 
|  |  | 
|  | struct mxc_gpio_port { | 
|  | struct list_head node; | 
|  | void __iomem *base; | 
|  | int irq; | 
|  | int irq_high; | 
|  | struct irq_domain *domain; | 
|  | struct bgpio_chip bgc; | 
|  | u32 both_edges; | 
|  | }; | 
|  |  | 
|  | static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = { | 
|  | .dr_reg		= 0x1c, | 
|  | .gdir_reg	= 0x00, | 
|  | .psr_reg	= 0x24, | 
|  | .icr1_reg	= 0x28, | 
|  | .icr2_reg	= 0x2c, | 
|  | .imr_reg	= 0x30, | 
|  | .isr_reg	= 0x34, | 
|  | .edge_sel_reg	= -EINVAL, | 
|  | .low_level	= 0x03, | 
|  | .high_level	= 0x02, | 
|  | .rise_edge	= 0x00, | 
|  | .fall_edge	= 0x01, | 
|  | }; | 
|  |  | 
|  | static struct mxc_gpio_hwdata imx31_gpio_hwdata = { | 
|  | .dr_reg		= 0x00, | 
|  | .gdir_reg	= 0x04, | 
|  | .psr_reg	= 0x08, | 
|  | .icr1_reg	= 0x0c, | 
|  | .icr2_reg	= 0x10, | 
|  | .imr_reg	= 0x14, | 
|  | .isr_reg	= 0x18, | 
|  | .edge_sel_reg	= -EINVAL, | 
|  | .low_level	= 0x00, | 
|  | .high_level	= 0x01, | 
|  | .rise_edge	= 0x02, | 
|  | .fall_edge	= 0x03, | 
|  | }; | 
|  |  | 
|  | static struct mxc_gpio_hwdata imx35_gpio_hwdata = { | 
|  | .dr_reg		= 0x00, | 
|  | .gdir_reg	= 0x04, | 
|  | .psr_reg	= 0x08, | 
|  | .icr1_reg	= 0x0c, | 
|  | .icr2_reg	= 0x10, | 
|  | .imr_reg	= 0x14, | 
|  | .isr_reg	= 0x18, | 
|  | .edge_sel_reg	= 0x1c, | 
|  | .low_level	= 0x00, | 
|  | .high_level	= 0x01, | 
|  | .rise_edge	= 0x02, | 
|  | .fall_edge	= 0x03, | 
|  | }; | 
|  |  | 
|  | static enum mxc_gpio_hwtype mxc_gpio_hwtype; | 
|  | static struct mxc_gpio_hwdata *mxc_gpio_hwdata; | 
|  |  | 
|  | #define GPIO_DR			(mxc_gpio_hwdata->dr_reg) | 
|  | #define GPIO_GDIR		(mxc_gpio_hwdata->gdir_reg) | 
|  | #define GPIO_PSR		(mxc_gpio_hwdata->psr_reg) | 
|  | #define GPIO_ICR1		(mxc_gpio_hwdata->icr1_reg) | 
|  | #define GPIO_ICR2		(mxc_gpio_hwdata->icr2_reg) | 
|  | #define GPIO_IMR		(mxc_gpio_hwdata->imr_reg) | 
|  | #define GPIO_ISR		(mxc_gpio_hwdata->isr_reg) | 
|  | #define GPIO_EDGE_SEL		(mxc_gpio_hwdata->edge_sel_reg) | 
|  |  | 
|  | #define GPIO_INT_LOW_LEV	(mxc_gpio_hwdata->low_level) | 
|  | #define GPIO_INT_HIGH_LEV	(mxc_gpio_hwdata->high_level) | 
|  | #define GPIO_INT_RISE_EDGE	(mxc_gpio_hwdata->rise_edge) | 
|  | #define GPIO_INT_FALL_EDGE	(mxc_gpio_hwdata->fall_edge) | 
|  | #define GPIO_INT_BOTH_EDGES	0x4 | 
|  |  | 
|  | static struct platform_device_id mxc_gpio_devtype[] = { | 
|  | { | 
|  | .name = "imx1-gpio", | 
|  | .driver_data = IMX1_GPIO, | 
|  | }, { | 
|  | .name = "imx21-gpio", | 
|  | .driver_data = IMX21_GPIO, | 
|  | }, { | 
|  | .name = "imx31-gpio", | 
|  | .driver_data = IMX31_GPIO, | 
|  | }, { | 
|  | .name = "imx35-gpio", | 
|  | .driver_data = IMX35_GPIO, | 
|  | }, { | 
|  | /* sentinel */ | 
|  | } | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id mxc_gpio_dt_ids[] = { | 
|  | { .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], }, | 
|  | { .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], }, | 
|  | { .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], }, | 
|  | { .compatible = "fsl,imx35-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * MX2 has one interrupt *for all* gpio ports. The list is used | 
|  | * to save the references to all ports, so that mx2_gpio_irq_handler | 
|  | * can walk through all interrupt status registers. | 
|  | */ | 
|  | static LIST_HEAD(mxc_gpio_ports); | 
|  |  | 
|  | /* Note: This driver assumes 32 GPIOs are handled in one register */ | 
|  |  | 
|  | static int gpio_set_irq_type(struct irq_data *d, u32 type) | 
|  | { | 
|  | struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); | 
|  | struct mxc_gpio_port *port = gc->private; | 
|  | u32 bit, val; | 
|  | u32 gpio_idx = d->hwirq; | 
|  | u32 gpio = port->bgc.gc.base + gpio_idx; | 
|  | int edge; | 
|  | void __iomem *reg = port->base; | 
|  |  | 
|  | port->both_edges &= ~(1 << gpio_idx); | 
|  | switch (type) { | 
|  | case IRQ_TYPE_EDGE_RISING: | 
|  | edge = GPIO_INT_RISE_EDGE; | 
|  | break; | 
|  | case IRQ_TYPE_EDGE_FALLING: | 
|  | edge = GPIO_INT_FALL_EDGE; | 
|  | break; | 
|  | case IRQ_TYPE_EDGE_BOTH: | 
|  | if (GPIO_EDGE_SEL >= 0) { | 
|  | edge = GPIO_INT_BOTH_EDGES; | 
|  | } else { | 
|  | val = gpio_get_value(gpio); | 
|  | if (val) { | 
|  | edge = GPIO_INT_LOW_LEV; | 
|  | pr_debug("mxc: set GPIO %d to low trigger\n", gpio); | 
|  | } else { | 
|  | edge = GPIO_INT_HIGH_LEV; | 
|  | pr_debug("mxc: set GPIO %d to high trigger\n", gpio); | 
|  | } | 
|  | port->both_edges |= 1 << gpio_idx; | 
|  | } | 
|  | break; | 
|  | case IRQ_TYPE_LEVEL_LOW: | 
|  | edge = GPIO_INT_LOW_LEV; | 
|  | break; | 
|  | case IRQ_TYPE_LEVEL_HIGH: | 
|  | edge = GPIO_INT_HIGH_LEV; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (GPIO_EDGE_SEL >= 0) { | 
|  | val = readl(port->base + GPIO_EDGE_SEL); | 
|  | if (edge == GPIO_INT_BOTH_EDGES) | 
|  | writel(val | (1 << gpio_idx), | 
|  | port->base + GPIO_EDGE_SEL); | 
|  | else | 
|  | writel(val & ~(1 << gpio_idx), | 
|  | port->base + GPIO_EDGE_SEL); | 
|  | } | 
|  |  | 
|  | if (edge != GPIO_INT_BOTH_EDGES) { | 
|  | reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */ | 
|  | bit = gpio_idx & 0xf; | 
|  | val = readl(reg) & ~(0x3 << (bit << 1)); | 
|  | writel(val | (edge << (bit << 1)), reg); | 
|  | } | 
|  |  | 
|  | writel(1 << gpio_idx, port->base + GPIO_ISR); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) | 
|  | { | 
|  | void __iomem *reg = port->base; | 
|  | u32 bit, val; | 
|  | int edge; | 
|  |  | 
|  | reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ | 
|  | bit = gpio & 0xf; | 
|  | val = readl(reg); | 
|  | edge = (val >> (bit << 1)) & 3; | 
|  | val &= ~(0x3 << (bit << 1)); | 
|  | if (edge == GPIO_INT_HIGH_LEV) { | 
|  | edge = GPIO_INT_LOW_LEV; | 
|  | pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); | 
|  | } else if (edge == GPIO_INT_LOW_LEV) { | 
|  | edge = GPIO_INT_HIGH_LEV; | 
|  | pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); | 
|  | } else { | 
|  | pr_err("mxc: invalid configuration for GPIO %d: %x\n", | 
|  | gpio, edge); | 
|  | return; | 
|  | } | 
|  | writel(val | (edge << (bit << 1)), reg); | 
|  | } | 
|  |  | 
|  | /* handle 32 interrupts in one status register */ | 
|  | static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) | 
|  | { | 
|  | while (irq_stat != 0) { | 
|  | int irqoffset = fls(irq_stat) - 1; | 
|  |  | 
|  | if (port->both_edges & (1 << irqoffset)) | 
|  | mxc_flip_edge(port, irqoffset); | 
|  |  | 
|  | generic_handle_irq(irq_find_mapping(port->domain, irqoffset)); | 
|  |  | 
|  | irq_stat &= ~(1 << irqoffset); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* MX1 and MX3 has one interrupt *per* gpio port */ | 
|  | static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) | 
|  | { | 
|  | u32 irq_stat; | 
|  | struct mxc_gpio_port *port = irq_get_handler_data(irq); | 
|  | struct irq_chip *chip = irq_get_chip(irq); | 
|  |  | 
|  | chained_irq_enter(chip, desc); | 
|  |  | 
|  | irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR); | 
|  |  | 
|  | mxc_gpio_irq_handler(port, irq_stat); | 
|  |  | 
|  | chained_irq_exit(chip, desc); | 
|  | } | 
|  |  | 
|  | /* MX2 has one interrupt *for all* gpio ports */ | 
|  | static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) | 
|  | { | 
|  | u32 irq_msk, irq_stat; | 
|  | struct mxc_gpio_port *port; | 
|  | struct irq_chip *chip = irq_get_chip(irq); | 
|  |  | 
|  | chained_irq_enter(chip, desc); | 
|  |  | 
|  | /* walk through all interrupt status registers */ | 
|  | list_for_each_entry(port, &mxc_gpio_ports, node) { | 
|  | irq_msk = readl(port->base + GPIO_IMR); | 
|  | if (!irq_msk) | 
|  | continue; | 
|  |  | 
|  | irq_stat = readl(port->base + GPIO_ISR) & irq_msk; | 
|  | if (irq_stat) | 
|  | mxc_gpio_irq_handler(port, irq_stat); | 
|  | } | 
|  | chained_irq_exit(chip, desc); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Set interrupt number "irq" in the GPIO as a wake-up source. | 
|  | * While system is running, all registered GPIO interrupts need to have | 
|  | * wake-up enabled. When system is suspended, only selected GPIO interrupts | 
|  | * need to have wake-up enabled. | 
|  | * @param  irq          interrupt source number | 
|  | * @param  enable       enable as wake-up if equal to non-zero | 
|  | * @return       This function returns 0 on success. | 
|  | */ | 
|  | static int gpio_set_wake_irq(struct irq_data *d, u32 enable) | 
|  | { | 
|  | struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); | 
|  | struct mxc_gpio_port *port = gc->private; | 
|  | u32 gpio_idx = d->hwirq; | 
|  |  | 
|  | if (enable) { | 
|  | if (port->irq_high && (gpio_idx >= 16)) | 
|  | enable_irq_wake(port->irq_high); | 
|  | else | 
|  | enable_irq_wake(port->irq); | 
|  | } else { | 
|  | if (port->irq_high && (gpio_idx >= 16)) | 
|  | disable_irq_wake(port->irq_high); | 
|  | else | 
|  | disable_irq_wake(port->irq); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base) | 
|  | { | 
|  | struct irq_chip_generic *gc; | 
|  | struct irq_chip_type *ct; | 
|  |  | 
|  | gc = irq_alloc_generic_chip("gpio-mxc", 1, irq_base, | 
|  | port->base, handle_level_irq); | 
|  | gc->private = port; | 
|  |  | 
|  | ct = gc->chip_types; | 
|  | ct->chip.irq_ack = irq_gc_ack_set_bit; | 
|  | ct->chip.irq_mask = irq_gc_mask_clr_bit; | 
|  | ct->chip.irq_unmask = irq_gc_mask_set_bit; | 
|  | ct->chip.irq_set_type = gpio_set_irq_type; | 
|  | ct->chip.irq_set_wake = gpio_set_wake_irq; | 
|  | ct->regs.ack = GPIO_ISR; | 
|  | ct->regs.mask = GPIO_IMR; | 
|  |  | 
|  | irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK, | 
|  | IRQ_NOREQUEST, 0); | 
|  | } | 
|  |  | 
|  | static void mxc_gpio_get_hw(struct platform_device *pdev) | 
|  | { | 
|  | const struct of_device_id *of_id = | 
|  | of_match_device(mxc_gpio_dt_ids, &pdev->dev); | 
|  | enum mxc_gpio_hwtype hwtype; | 
|  |  | 
|  | if (of_id) | 
|  | pdev->id_entry = of_id->data; | 
|  | hwtype = pdev->id_entry->driver_data; | 
|  |  | 
|  | if (mxc_gpio_hwtype) { | 
|  | /* | 
|  | * The driver works with a reasonable presupposition, | 
|  | * that is all gpio ports must be the same type when | 
|  | * running on one soc. | 
|  | */ | 
|  | BUG_ON(mxc_gpio_hwtype != hwtype); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (hwtype == IMX35_GPIO) | 
|  | mxc_gpio_hwdata = &imx35_gpio_hwdata; | 
|  | else if (hwtype == IMX31_GPIO) | 
|  | mxc_gpio_hwdata = &imx31_gpio_hwdata; | 
|  | else | 
|  | mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata; | 
|  |  | 
|  | mxc_gpio_hwtype = hwtype; | 
|  | } | 
|  |  | 
|  | static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset) | 
|  | { | 
|  | struct bgpio_chip *bgc = to_bgpio_chip(gc); | 
|  | struct mxc_gpio_port *port = | 
|  | container_of(bgc, struct mxc_gpio_port, bgc); | 
|  |  | 
|  | return irq_find_mapping(port->domain, offset); | 
|  | } | 
|  |  | 
|  | static int mxc_gpio_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device_node *np = pdev->dev.of_node; | 
|  | struct mxc_gpio_port *port; | 
|  | struct resource *iores; | 
|  | int irq_base; | 
|  | int err; | 
|  |  | 
|  | mxc_gpio_get_hw(pdev); | 
|  |  | 
|  | port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL); | 
|  | if (!port) | 
|  | return -ENOMEM; | 
|  |  | 
|  | iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | port->base = devm_ioremap_resource(&pdev->dev, iores); | 
|  | if (IS_ERR(port->base)) | 
|  | return PTR_ERR(port->base); | 
|  |  | 
|  | port->irq_high = platform_get_irq(pdev, 1); | 
|  | port->irq = platform_get_irq(pdev, 0); | 
|  | if (port->irq < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* disable the interrupt and clear the status */ | 
|  | writel(0, port->base + GPIO_IMR); | 
|  | writel(~0, port->base + GPIO_ISR); | 
|  |  | 
|  | if (mxc_gpio_hwtype == IMX21_GPIO) { | 
|  | /* | 
|  | * Setup one handler for all GPIO interrupts. Actually setting | 
|  | * the handler is needed only once, but doing it for every port | 
|  | * is more robust and easier. | 
|  | */ | 
|  | irq_set_chained_handler(port->irq, mx2_gpio_irq_handler); | 
|  | } else { | 
|  | /* setup one handler for each entry */ | 
|  | irq_set_chained_handler(port->irq, mx3_gpio_irq_handler); | 
|  | irq_set_handler_data(port->irq, port); | 
|  | if (port->irq_high > 0) { | 
|  | /* setup handler for GPIO 16 to 31 */ | 
|  | irq_set_chained_handler(port->irq_high, | 
|  | mx3_gpio_irq_handler); | 
|  | irq_set_handler_data(port->irq_high, port); | 
|  | } | 
|  | } | 
|  |  | 
|  | err = bgpio_init(&port->bgc, &pdev->dev, 4, | 
|  | port->base + GPIO_PSR, | 
|  | port->base + GPIO_DR, NULL, | 
|  | port->base + GPIO_GDIR, NULL, 0); | 
|  | if (err) | 
|  | goto out_bgio; | 
|  |  | 
|  | port->bgc.gc.to_irq = mxc_gpio_to_irq; | 
|  | port->bgc.gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 : | 
|  | pdev->id * 32; | 
|  |  | 
|  | err = gpiochip_add(&port->bgc.gc); | 
|  | if (err) | 
|  | goto out_bgpio_remove; | 
|  |  | 
|  | irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id()); | 
|  | if (irq_base < 0) { | 
|  | err = irq_base; | 
|  | goto out_gpiochip_remove; | 
|  | } | 
|  |  | 
|  | port->domain = irq_domain_add_legacy(np, 32, irq_base, 0, | 
|  | &irq_domain_simple_ops, NULL); | 
|  | if (!port->domain) { | 
|  | err = -ENODEV; | 
|  | goto out_irqdesc_free; | 
|  | } | 
|  |  | 
|  | /* gpio-mxc can be a generic irq chip */ | 
|  | mxc_gpio_init_gc(port, irq_base); | 
|  |  | 
|  | list_add_tail(&port->node, &mxc_gpio_ports); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_irqdesc_free: | 
|  | irq_free_descs(irq_base, 32); | 
|  | out_gpiochip_remove: | 
|  | WARN_ON(gpiochip_remove(&port->bgc.gc) < 0); | 
|  | out_bgpio_remove: | 
|  | bgpio_remove(&port->bgc); | 
|  | out_bgio: | 
|  | dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static struct platform_driver mxc_gpio_driver = { | 
|  | .driver		= { | 
|  | .name	= "gpio-mxc", | 
|  | .owner	= THIS_MODULE, | 
|  | .of_match_table = mxc_gpio_dt_ids, | 
|  | }, | 
|  | .probe		= mxc_gpio_probe, | 
|  | .id_table	= mxc_gpio_devtype, | 
|  | }; | 
|  |  | 
|  | static int __init gpio_mxc_init(void) | 
|  | { | 
|  | return platform_driver_register(&mxc_gpio_driver); | 
|  | } | 
|  | postcore_initcall(gpio_mxc_init); | 
|  |  | 
|  | MODULE_AUTHOR("Freescale Semiconductor, " | 
|  | "Daniel Mack <danielncaiaq.de>, " | 
|  | "Juergen Beisert <kernel@pengutronix.de>"); | 
|  | MODULE_DESCRIPTION("Freescale MXC GPIO"); | 
|  | MODULE_LICENSE("GPL"); |