|  | /* | 
|  | * Copyright (C) 2011 Alexander Stein <alexander.stein@systec-electronic.com> | 
|  | * | 
|  | * The LM95245 is a sensor chip made by National Semiconductors. | 
|  | * It reports up to two temperatures (its own plus an external one). | 
|  | * Complete datasheet can be obtained from National's website at: | 
|  | *   http://www.national.com/ds.cgi/LM/LM95245.pdf | 
|  | * | 
|  | * This driver is based on lm95241.c | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/hwmon.h> | 
|  | #include <linux/hwmon-sysfs.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/sysfs.h> | 
|  |  | 
|  | #define DEVNAME "lm95245" | 
|  |  | 
|  | static const unsigned short normal_i2c[] = { | 
|  | 0x18, 0x19, 0x29, 0x4c, 0x4d, I2C_CLIENT_END }; | 
|  |  | 
|  | /* LM95245 registers */ | 
|  | /* general registers */ | 
|  | #define LM95245_REG_RW_CONFIG1		0x03 | 
|  | #define LM95245_REG_RW_CONVERS_RATE	0x04 | 
|  | #define LM95245_REG_W_ONE_SHOT		0x0F | 
|  |  | 
|  | /* diode configuration */ | 
|  | #define LM95245_REG_RW_CONFIG2		0xBF | 
|  | #define LM95245_REG_RW_REMOTE_OFFH	0x11 | 
|  | #define LM95245_REG_RW_REMOTE_OFFL	0x12 | 
|  |  | 
|  | /* status registers */ | 
|  | #define LM95245_REG_R_STATUS1		0x02 | 
|  | #define LM95245_REG_R_STATUS2		0x33 | 
|  |  | 
|  | /* limit registers */ | 
|  | #define LM95245_REG_RW_REMOTE_OS_LIMIT		0x07 | 
|  | #define LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT	0x20 | 
|  | #define LM95245_REG_RW_REMOTE_TCRIT_LIMIT	0x19 | 
|  | #define LM95245_REG_RW_COMMON_HYSTERESIS	0x21 | 
|  |  | 
|  | /* temperature signed */ | 
|  | #define LM95245_REG_R_LOCAL_TEMPH_S	0x00 | 
|  | #define LM95245_REG_R_LOCAL_TEMPL_S	0x30 | 
|  | #define LM95245_REG_R_REMOTE_TEMPH_S	0x01 | 
|  | #define LM95245_REG_R_REMOTE_TEMPL_S	0x10 | 
|  | /* temperature unsigned */ | 
|  | #define LM95245_REG_R_REMOTE_TEMPH_U	0x31 | 
|  | #define LM95245_REG_R_REMOTE_TEMPL_U	0x32 | 
|  |  | 
|  | /* id registers */ | 
|  | #define LM95245_REG_R_MAN_ID		0xFE | 
|  | #define LM95245_REG_R_CHIP_ID		0xFF | 
|  |  | 
|  | /* LM95245 specific bitfields */ | 
|  | #define CFG_STOP		0x40 | 
|  | #define CFG_REMOTE_TCRIT_MASK	0x10 | 
|  | #define CFG_REMOTE_OS_MASK	0x08 | 
|  | #define CFG_LOCAL_TCRIT_MASK	0x04 | 
|  | #define CFG_LOCAL_OS_MASK	0x02 | 
|  |  | 
|  | #define CFG2_OS_A0		0x40 | 
|  | #define CFG2_DIODE_FAULT_OS	0x20 | 
|  | #define CFG2_DIODE_FAULT_TCRIT	0x10 | 
|  | #define CFG2_REMOTE_TT		0x08 | 
|  | #define CFG2_REMOTE_FILTER_DIS	0x00 | 
|  | #define CFG2_REMOTE_FILTER_EN	0x06 | 
|  |  | 
|  | /* conversation rate in ms */ | 
|  | #define RATE_CR0063	0x00 | 
|  | #define RATE_CR0364	0x01 | 
|  | #define RATE_CR1000	0x02 | 
|  | #define RATE_CR2500	0x03 | 
|  |  | 
|  | #define STATUS1_DIODE_FAULT	0x04 | 
|  | #define STATUS1_RTCRIT		0x02 | 
|  | #define STATUS1_LOC		0x01 | 
|  |  | 
|  | #define MANUFACTURER_ID		0x01 | 
|  | #define DEFAULT_REVISION	0xB3 | 
|  |  | 
|  | static const u8 lm95245_reg_address[] = { | 
|  | LM95245_REG_R_LOCAL_TEMPH_S, | 
|  | LM95245_REG_R_LOCAL_TEMPL_S, | 
|  | LM95245_REG_R_REMOTE_TEMPH_S, | 
|  | LM95245_REG_R_REMOTE_TEMPL_S, | 
|  | LM95245_REG_R_REMOTE_TEMPH_U, | 
|  | LM95245_REG_R_REMOTE_TEMPL_U, | 
|  | LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT, | 
|  | LM95245_REG_RW_REMOTE_TCRIT_LIMIT, | 
|  | LM95245_REG_RW_COMMON_HYSTERESIS, | 
|  | LM95245_REG_R_STATUS1, | 
|  | }; | 
|  |  | 
|  | /* Client data (each client gets its own) */ | 
|  | struct lm95245_data { | 
|  | struct device *hwmon_dev; | 
|  | struct mutex update_lock; | 
|  | unsigned long last_updated;	/* in jiffies */ | 
|  | unsigned long interval;	/* in msecs */ | 
|  | bool valid;		/* zero until following fields are valid */ | 
|  | /* registers values */ | 
|  | u8 regs[ARRAY_SIZE(lm95245_reg_address)]; | 
|  | u8 config1, config2; | 
|  | }; | 
|  |  | 
|  | /* Conversions */ | 
|  | static int temp_from_reg_unsigned(u8 val_h, u8 val_l) | 
|  | { | 
|  | return val_h * 1000 + val_l * 1000 / 256; | 
|  | } | 
|  |  | 
|  | static int temp_from_reg_signed(u8 val_h, u8 val_l) | 
|  | { | 
|  | if (val_h & 0x80) | 
|  | return (val_h - 0x100) * 1000; | 
|  | return temp_from_reg_unsigned(val_h, val_l); | 
|  | } | 
|  |  | 
|  | static struct lm95245_data *lm95245_update_device(struct device *dev) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  |  | 
|  | if (time_after(jiffies, data->last_updated | 
|  | + msecs_to_jiffies(data->interval)) || !data->valid) { | 
|  | int i; | 
|  |  | 
|  | dev_dbg(&client->dev, "Updating lm95245 data.\n"); | 
|  | for (i = 0; i < ARRAY_SIZE(lm95245_reg_address); i++) | 
|  | data->regs[i] | 
|  | = i2c_smbus_read_byte_data(client, | 
|  | lm95245_reg_address[i]); | 
|  | data->last_updated = jiffies; | 
|  | data->valid = 1; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return data; | 
|  | } | 
|  |  | 
|  | static unsigned long lm95245_read_conversion_rate(struct i2c_client *client) | 
|  | { | 
|  | int rate; | 
|  | unsigned long interval; | 
|  |  | 
|  | rate = i2c_smbus_read_byte_data(client, LM95245_REG_RW_CONVERS_RATE); | 
|  |  | 
|  | switch (rate) { | 
|  | case RATE_CR0063: | 
|  | interval = 63; | 
|  | break; | 
|  | case RATE_CR0364: | 
|  | interval = 364; | 
|  | break; | 
|  | case RATE_CR1000: | 
|  | interval = 1000; | 
|  | break; | 
|  | case RATE_CR2500: | 
|  | default: | 
|  | interval = 2500; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return interval; | 
|  | } | 
|  |  | 
|  | static unsigned long lm95245_set_conversion_rate(struct i2c_client *client, | 
|  | unsigned long interval) | 
|  | { | 
|  | int rate; | 
|  |  | 
|  | if (interval <= 63) { | 
|  | interval = 63; | 
|  | rate = RATE_CR0063; | 
|  | } else if (interval <= 364) { | 
|  | interval = 364; | 
|  | rate = RATE_CR0364; | 
|  | } else if (interval <= 1000) { | 
|  | interval = 1000; | 
|  | rate = RATE_CR1000; | 
|  | } else { | 
|  | interval = 2500; | 
|  | rate = RATE_CR2500; | 
|  | } | 
|  |  | 
|  | i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONVERS_RATE, rate); | 
|  |  | 
|  | return interval; | 
|  | } | 
|  |  | 
|  | /* Sysfs stuff */ | 
|  | static ssize_t show_input(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct lm95245_data *data = lm95245_update_device(dev); | 
|  | int temp; | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  |  | 
|  | /* | 
|  | * Index 0 (Local temp) is always signed | 
|  | * Index 2 (Remote temp) has both signed and unsigned data | 
|  | * use signed calculation for remote if signed bit is set | 
|  | */ | 
|  | if (index == 0 || data->regs[index] & 0x80) | 
|  | temp = temp_from_reg_signed(data->regs[index], | 
|  | data->regs[index + 1]); | 
|  | else | 
|  | temp = temp_from_reg_unsigned(data->regs[index + 2], | 
|  | data->regs[index + 3]); | 
|  |  | 
|  | return snprintf(buf, PAGE_SIZE - 1, "%d\n", temp); | 
|  | } | 
|  |  | 
|  | static ssize_t show_limit(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct lm95245_data *data = lm95245_update_device(dev); | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  |  | 
|  | return snprintf(buf, PAGE_SIZE - 1, "%d\n", | 
|  | data->regs[index] * 1000); | 
|  | } | 
|  |  | 
|  | static ssize_t set_limit(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  | unsigned long val; | 
|  |  | 
|  | if (kstrtoul(buf, 10, &val) < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | val /= 1000; | 
|  |  | 
|  | val = clamp_val(val, 0, (index == 6 ? 127 : 255)); | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  |  | 
|  | data->valid = 0; | 
|  |  | 
|  | i2c_smbus_write_byte_data(client, lm95245_reg_address[index], val); | 
|  |  | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t set_crit_hyst(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  | unsigned long val; | 
|  |  | 
|  | if (kstrtoul(buf, 10, &val) < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | val /= 1000; | 
|  |  | 
|  | val = clamp_val(val, 0, 31); | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  |  | 
|  | data->valid = 0; | 
|  |  | 
|  | /* shared crit hysteresis */ | 
|  | i2c_smbus_write_byte_data(client, LM95245_REG_RW_COMMON_HYSTERESIS, | 
|  | val); | 
|  |  | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t show_type(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  |  | 
|  | return snprintf(buf, PAGE_SIZE - 1, | 
|  | data->config2 & CFG2_REMOTE_TT ? "1\n" : "2\n"); | 
|  | } | 
|  |  | 
|  | static ssize_t set_type(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  | unsigned long val; | 
|  |  | 
|  | if (kstrtoul(buf, 10, &val) < 0) | 
|  | return -EINVAL; | 
|  | if (val != 1 && val != 2) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  |  | 
|  | if (val == 1) | 
|  | data->config2 |= CFG2_REMOTE_TT; | 
|  | else | 
|  | data->config2 &= ~CFG2_REMOTE_TT; | 
|  |  | 
|  | data->valid = 0; | 
|  |  | 
|  | i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG2, | 
|  | data->config2); | 
|  |  | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct lm95245_data *data = lm95245_update_device(dev); | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  |  | 
|  | return snprintf(buf, PAGE_SIZE - 1, "%d\n", | 
|  | !!(data->regs[9] & index)); | 
|  | } | 
|  |  | 
|  | static ssize_t show_interval(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct lm95245_data *data = lm95245_update_device(dev); | 
|  |  | 
|  | return snprintf(buf, PAGE_SIZE - 1, "%lu\n", data->interval); | 
|  | } | 
|  |  | 
|  | static ssize_t set_interval(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  | unsigned long val; | 
|  |  | 
|  | if (kstrtoul(buf, 10, &val) < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  |  | 
|  | data->interval = lm95245_set_conversion_rate(client, val); | 
|  |  | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_limit, | 
|  | set_limit, 6); | 
|  | static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_limit, | 
|  | set_crit_hyst, 8); | 
|  | static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, | 
|  | STATUS1_LOC); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2); | 
|  | static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_limit, | 
|  | set_limit, 7); | 
|  | static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_limit, | 
|  | set_crit_hyst, 8); | 
|  | static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, | 
|  | STATUS1_RTCRIT); | 
|  | static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, | 
|  | set_type, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, | 
|  | STATUS1_DIODE_FAULT); | 
|  |  | 
|  | static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, | 
|  | set_interval); | 
|  |  | 
|  | static struct attribute *lm95245_attributes[] = { | 
|  | &sensor_dev_attr_temp1_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_crit.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_crit.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_type.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_fault.dev_attr.attr, | 
|  | &dev_attr_update_interval.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group lm95245_group = { | 
|  | .attrs = lm95245_attributes, | 
|  | }; | 
|  |  | 
|  | /* Return 0 if detection is successful, -ENODEV otherwise */ | 
|  | static int lm95245_detect(struct i2c_client *new_client, | 
|  | struct i2c_board_info *info) | 
|  | { | 
|  | struct i2c_adapter *adapter = new_client->adapter; | 
|  |  | 
|  | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID) | 
|  | != MANUFACTURER_ID | 
|  | || i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID) | 
|  | != DEFAULT_REVISION) | 
|  | return -ENODEV; | 
|  |  | 
|  | strlcpy(info->type, DEVNAME, I2C_NAME_SIZE); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void lm95245_init_client(struct i2c_client *client) | 
|  | { | 
|  | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  |  | 
|  | data->valid = 0; | 
|  | data->interval = lm95245_read_conversion_rate(client); | 
|  |  | 
|  | data->config1 = i2c_smbus_read_byte_data(client, | 
|  | LM95245_REG_RW_CONFIG1); | 
|  | data->config2 = i2c_smbus_read_byte_data(client, | 
|  | LM95245_REG_RW_CONFIG2); | 
|  |  | 
|  | if (data->config1 & CFG_STOP) { | 
|  | /* Clear the standby bit */ | 
|  | data->config1 &= ~CFG_STOP; | 
|  | i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG1, | 
|  | data->config1); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int lm95245_probe(struct i2c_client *new_client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct lm95245_data *data; | 
|  | int err; | 
|  |  | 
|  | data = devm_kzalloc(&new_client->dev, sizeof(struct lm95245_data), | 
|  | GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | i2c_set_clientdata(new_client, data); | 
|  | mutex_init(&data->update_lock); | 
|  |  | 
|  | /* Initialize the LM95245 chip */ | 
|  | lm95245_init_client(new_client); | 
|  |  | 
|  | /* Register sysfs hooks */ | 
|  | err = sysfs_create_group(&new_client->dev.kobj, &lm95245_group); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | data->hwmon_dev = hwmon_device_register(&new_client->dev); | 
|  | if (IS_ERR(data->hwmon_dev)) { | 
|  | err = PTR_ERR(data->hwmon_dev); | 
|  | goto exit_remove_files; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit_remove_files: | 
|  | sysfs_remove_group(&new_client->dev.kobj, &lm95245_group); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int lm95245_remove(struct i2c_client *client) | 
|  | { | 
|  | struct lm95245_data *data = i2c_get_clientdata(client); | 
|  |  | 
|  | hwmon_device_unregister(data->hwmon_dev); | 
|  | sysfs_remove_group(&client->dev.kobj, &lm95245_group); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Driver data (common to all clients) */ | 
|  | static const struct i2c_device_id lm95245_id[] = { | 
|  | { DEVNAME, 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, lm95245_id); | 
|  |  | 
|  | static struct i2c_driver lm95245_driver = { | 
|  | .class		= I2C_CLASS_HWMON, | 
|  | .driver = { | 
|  | .name	= DEVNAME, | 
|  | }, | 
|  | .probe		= lm95245_probe, | 
|  | .remove		= lm95245_remove, | 
|  | .id_table	= lm95245_id, | 
|  | .detect		= lm95245_detect, | 
|  | .address_list	= normal_i2c, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(lm95245_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>"); | 
|  | MODULE_DESCRIPTION("LM95245 sensor driver"); | 
|  | MODULE_LICENSE("GPL"); |