drivers: net: 3com: 3c515: Remove this driver The 3c515 was written by Donald Becker between 1997-1998. It is an ISA device, so unlikely to be used with modern kernels. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260422-v7-0-0-net-next-driver-removal-v1-v2-2-08a5b59784d5@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
diff --git a/drivers/net/Space.c b/drivers/net/Space.c index c01e2c2..e3b8883 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c
@@ -200,9 +200,6 @@ static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe) * look for EISA/PCI cards in addition to ISA cards). */ static struct devprobe2 isa_probes[] __initdata = { -#ifdef CONFIG_3C515 - {tc515_probe, 0}, -#endif #ifdef CONFIG_ULTRA {ultra_probe, 0}, #endif
diff --git a/drivers/net/ethernet/3com/3c515.c b/drivers/net/ethernet/3com/3c515.c deleted file mode 100644 index 2227c83..0000000 --- a/drivers/net/ethernet/3com/3c515.c +++ /dev/null
@@ -1,1566 +0,0 @@ -/* - Written 1997-1998 by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - This driver is for the 3Com ISA EtherLink XL "Corkscrew" 3c515 ethercard. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - - 2000/2/2- Added support for kernel-level ISAPnP - by Stephen Frost <sfrost@snowman.net> and Alessandro Zummo - Cleaned up for 2.3.x/softnet by Jeff Garzik and Alan Cox. - - 2001/11/17 - Added ethtool support (jgarzik) - - 2002/10/28 - Locking updates for 2.5 (alan@lxorguk.ukuu.org.uk) - -*/ - -#define DRV_NAME "3c515" - -#define CORKSCREW 1 - -/* "Knobs" that adjust features and parameters. */ -/* Set the copy breakpoint for the copy-only-tiny-frames scheme. - Setting to > 1512 effectively disables this feature. */ -static int rx_copybreak = 200; - -/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ -static int max_interrupt_work = 20; - -/* Enable the automatic media selection code -- usually set. */ -#define AUTOMEDIA 1 - -/* Allow the use of fragment bus master transfers instead of only - programmed-I/O for Vortex cards. Full-bus-master transfers are always - enabled by default on Boomerang cards. If VORTEX_BUS_MASTER is defined, - the feature may be turned on using 'options'. */ -#define VORTEX_BUS_MASTER - -/* A few values that may be tweaked. */ -/* Keep the ring sizes a power of two for efficiency. */ -#define TX_RING_SIZE 16 -#define RX_RING_SIZE 16 -#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */ - -#include <linux/module.h> -#include <linux/isapnp.h> -#include <linux/kernel.h> -#include <linux/netdevice.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/in.h> -#include <linux/ioport.h> -#include <linux/skbuff.h> -#include <linux/etherdevice.h> -#include <linux/interrupt.h> -#include <linux/timer.h> -#include <linux/ethtool.h> -#include <linux/bitops.h> -#include <linux/uaccess.h> - -#include <net/Space.h> - -#include <asm/io.h> -#include <asm/dma.h> - -#define NEW_MULTICAST -#include <linux/delay.h> - -#define MAX_UNITS 8 - -MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); -MODULE_DESCRIPTION("3Com 3c515 Corkscrew driver"); -MODULE_LICENSE("GPL"); - -/* "Knobs" for adjusting internal parameters. */ -/* Put out somewhat more debugging messages. (0 - no msg, 1 minimal msgs). */ -#define DRIVER_DEBUG 1 -/* Some values here only for performance evaluation and path-coverage - debugging. */ -static int rx_nocopy, rx_copy, queued_packet; - -/* Number of times to check to see if the Tx FIFO has space, used in some - limited cases. */ -#define WAIT_TX_AVAIL 200 - -/* Operational parameter that usually are not changed. */ -#define TX_TIMEOUT ((4*HZ)/10) /* Time in jiffies before concluding Tx hung */ - -/* The size here is somewhat misleading: the Corkscrew also uses the ISA - aliased registers at <base>+0x400. - */ -#define CORKSCREW_TOTAL_SIZE 0x20 - -#ifdef DRIVER_DEBUG -static int corkscrew_debug = DRIVER_DEBUG; -#else -static int corkscrew_debug = 1; -#endif - -#define CORKSCREW_ID 10 - -/* - Theory of Operation - -I. Board Compatibility - -This device driver is designed for the 3Com 3c515 ISA Fast EtherLink XL, -3Com's ISA bus adapter for Fast Ethernet. Due to the unique I/O port layout, -it's not practical to integrate this driver with the other EtherLink drivers. - -II. Board-specific settings - -The Corkscrew has an EEPROM for configuration, but no special settings are -needed for Linux. - -III. Driver operation - -The 3c515 series use an interface that's very similar to the 3c900 "Boomerang" -PCI cards, with the bus master interface extensively modified to work with -the ISA bus. - -The card is capable of full-bus-master transfers with separate -lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet, -DEC Tulip and Intel Speedo3. - -This driver uses a "RX_COPYBREAK" scheme rather than a fixed intermediate -receive buffer. This scheme allocates full-sized skbuffs as receive -buffers. The value RX_COPYBREAK is used as the copying breakpoint: it is -chosen to trade-off the memory wasted by passing the full-sized skbuff to -the queue layer for all frames vs. the copying cost of copying a frame to a -correctly-sized skbuff. - - -IIIC. Synchronization -The driver runs as two independent, single-threaded flows of control. One -is the send-packet routine, which enforces single-threaded use by the netif -layer. The other thread is the interrupt handler, which is single -threaded by the hardware and other software. - -IV. Notes - -Thanks to Terry Murphy of 3Com for providing documentation and a development -board. - -The names "Vortex", "Boomerang" and "Corkscrew" are the internal 3Com -project names. I use these names to eliminate confusion -- 3Com product -numbers and names are very similar and often confused. - -The new chips support both ethernet (1.5K) and FDDI (4.5K) frame sizes! -This driver only supports ethernet frames because of the recent MTU limit -of 1.5K, but the changes to support 4.5K are minimal. -*/ - -/* Operational definitions. - These are not used by other compilation units and thus are not - exported in a ".h" file. - - First the windows. There are eight register windows, with the command - and status registers available in each. - */ -#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD) -#define EL3_CMD 0x0e -#define EL3_STATUS 0x0e - -/* The top five bits written to EL3_CMD are a command, the lower - 11 bits are the parameter, if applicable. - Note that 11 parameters bits was fine for ethernet, but the new chips - can handle FDDI length frames (~4500 octets) and now parameters count - 32-bit 'Dwords' rather than octets. */ - -enum corkscrew_cmd { - TotalReset = 0 << 11, SelectWindow = 1 << 11, StartCoax = 2 << 11, - RxDisable = 3 << 11, RxEnable = 4 << 11, RxReset = 5 << 11, - UpStall = 6 << 11, UpUnstall = (6 << 11) + 1, DownStall = (6 << 11) + 2, - DownUnstall = (6 << 11) + 3, RxDiscard = 8 << 11, TxEnable = 9 << 11, - TxDisable = 10 << 11, TxReset = 11 << 11, FakeIntr = 12 << 11, - AckIntr = 13 << 11, SetIntrEnb = 14 << 11, SetStatusEnb = 15 << 11, - SetRxFilter = 16 << 11, SetRxThreshold = 17 << 11, - SetTxThreshold = 18 << 11, SetTxStart = 19 << 11, StartDMAUp = 20 << 11, - StartDMADown = (20 << 11) + 1, StatsEnable = 21 << 11, - StatsDisable = 22 << 11, StopCoax = 23 << 11, -}; - -/* The SetRxFilter command accepts the following classes: */ -enum RxFilter { - RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 -}; - -/* Bits in the general status register. */ -enum corkscrew_status { - IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004, - TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, - IntReq = 0x0040, StatsFull = 0x0080, - DMADone = 1 << 8, DownComplete = 1 << 9, UpComplete = 1 << 10, - DMAInProgress = 1 << 11, /* DMA controller is still busy. */ - CmdInProgress = 1 << 12, /* EL3_CMD is still busy. */ -}; - -/* Register window 1 offsets, the window used in normal operation. - On the Corkscrew this window is always mapped at offsets 0x10-0x1f. */ -enum Window1 { - TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14, - RxStatus = 0x18, Timer = 0x1A, TxStatus = 0x1B, - TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */ -}; -enum Window0 { - Wn0IRQ = 0x08, -#if defined(CORKSCREW) - Wn0EepromCmd = 0x200A, /* Corkscrew EEPROM command register. */ - Wn0EepromData = 0x200C, /* Corkscrew EEPROM results register. */ -#else - Wn0EepromCmd = 10, /* Window 0: EEPROM command register. */ - Wn0EepromData = 12, /* Window 0: EEPROM results register. */ -#endif -}; -enum Win0_EEPROM_bits { - EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0, - EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */ - EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */ -}; - -/* EEPROM locations. */ -enum eeprom_offset { - PhysAddr01 = 0, PhysAddr23 = 1, PhysAddr45 = 2, ModelID = 3, - EtherLink3ID = 7, -}; - -enum Window3 { /* Window 3: MAC/config bits. */ - Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8, -}; -enum wn3_config { - Ram_size = 7, - Ram_width = 8, - Ram_speed = 0x30, - Rom_size = 0xc0, - Ram_split_shift = 16, - Ram_split = 3 << Ram_split_shift, - Xcvr_shift = 20, - Xcvr = 7 << Xcvr_shift, - Autoselect = 0x1000000, -}; - -enum Window4 { - Wn4_NetDiag = 6, Wn4_Media = 10, /* Window 4: Xcvr/media bits. */ -}; -enum Win4_Media_bits { - Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */ - Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */ - Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */ - Media_LnkBeat = 0x0800, -}; -enum Window7 { /* Window 7: Bus Master control. */ - Wn7_MasterAddr = 0, Wn7_MasterLen = 6, Wn7_MasterStatus = 12, -}; - -/* Boomerang-style bus master control registers. Note ISA aliases! */ -enum MasterCtrl { - PktStatus = 0x400, DownListPtr = 0x404, FragAddr = 0x408, FragLen = - 0x40c, - TxFreeThreshold = 0x40f, UpPktStatus = 0x410, UpListPtr = 0x418, -}; - -/* The Rx and Tx descriptor lists. - Caution Alpha hackers: these types are 32 bits! Note also the 8 byte - alignment contraint on tx_ring[] and rx_ring[]. */ -struct boom_rx_desc { - u32 next; - s32 status; - u32 addr; - s32 length; -}; - -/* Values for the Rx status entry. */ -enum rx_desc_status { - RxDComplete = 0x00008000, RxDError = 0x4000, - /* See boomerang_rx() for actual error bits */ -}; - -struct boom_tx_desc { - u32 next; - s32 status; - u32 addr; - s32 length; -}; - -struct corkscrew_private { - const char *product_name; - struct list_head list; - struct net_device *our_dev; - /* The Rx and Tx rings are here to keep them quad-word-aligned. */ - struct boom_rx_desc rx_ring[RX_RING_SIZE]; - struct boom_tx_desc tx_ring[TX_RING_SIZE]; - /* The addresses of transmit- and receive-in-place skbuffs. */ - struct sk_buff *rx_skbuff[RX_RING_SIZE]; - struct sk_buff *tx_skbuff[TX_RING_SIZE]; - unsigned int cur_rx, cur_tx; /* The next free ring entry */ - unsigned int dirty_rx, dirty_tx;/* The ring entries to be free()ed. */ - struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */ - struct timer_list timer; /* Media selection timer. */ - int capabilities ; /* Adapter capabilities word. */ - int options; /* User-settable misc. driver options. */ - int last_rx_packets; /* For media autoselection. */ - unsigned int available_media:8, /* From Wn3_Options */ - media_override:3, /* Passed-in media type. */ - default_media:3, /* Read from the EEPROM. */ - full_duplex:1, autoselect:1, bus_master:1, /* Vortex can only do a fragment bus-m. */ - full_bus_master_tx:1, full_bus_master_rx:1, /* Boomerang */ - tx_full:1; - spinlock_t lock; - struct device *dev; -}; - -/* The action to take with a media selection timer tick. - Note that we deviate from the 3Com order by checking 10base2 before AUI. - */ -enum xcvr_types { - XCVR_10baseT = 0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx, - XCVR_100baseFx, XCVR_MII = 6, XCVR_Default = 8, -}; - -static struct media_table { - char *name; - unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */ - mask:8, /* The transceiver-present bit in Wn3_Config. */ - next:8; /* The media type to try next. */ - short wait; /* Time before we check media status. */ -} media_tbl[] = { - { "10baseT", Media_10TP, 0x08, XCVR_10base2, (14 * HZ) / 10 }, - { "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1 * HZ) / 10}, - { "undefined", 0, 0x80, XCVR_10baseT, 10000}, - { "10base2", 0, 0x10, XCVR_AUI, (1 * HZ) / 10}, - { "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14 * HZ) / 10}, - { "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14 * HZ) / 10}, - { "MII", 0, 0x40, XCVR_10baseT, 3 * HZ}, - { "undefined", 0, 0x01, XCVR_10baseT, 10000}, - { "Default", 0, 0xFF, XCVR_10baseT, 10000}, -}; - -#ifdef __ISAPNP__ -static struct isapnp_device_id corkscrew_isapnp_adapters[] = { - { ISAPNP_ANY_ID, ISAPNP_ANY_ID, - ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5051), - (long) "3Com Fast EtherLink ISA" }, - { } /* terminate list */ -}; - -MODULE_DEVICE_TABLE(isapnp, corkscrew_isapnp_adapters); - -static int nopnp; -#endif /* __ISAPNP__ */ - -static struct net_device *corkscrew_scan(int unit); -static int corkscrew_setup(struct net_device *dev, int ioaddr, - struct pnp_dev *idev, int card_number); -static int corkscrew_open(struct net_device *dev); -static void corkscrew_timer(struct timer_list *t); -static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb, - struct net_device *dev); -static int corkscrew_rx(struct net_device *dev); -static void corkscrew_timeout(struct net_device *dev, unsigned int txqueue); -static int boomerang_rx(struct net_device *dev); -static irqreturn_t corkscrew_interrupt(int irq, void *dev_id); -static int corkscrew_close(struct net_device *dev); -static void update_stats(int addr, struct net_device *dev); -static struct net_device_stats *corkscrew_get_stats(struct net_device *dev); -static void set_rx_mode(struct net_device *dev); -static const struct ethtool_ops netdev_ethtool_ops; - - -/* - Unfortunately maximizing the shared code between the integrated and - module version of the driver results in a complicated set of initialization - procedures. - init_module() -- modules / tc59x_init() -- built-in - The wrappers for corkscrew_scan() - corkscrew_scan() The common routine that scans for PCI and EISA cards - corkscrew_found_device() Allocate a device structure when we find a card. - Different versions exist for modules and built-in. - corkscrew_probe1() Fill in the device structure -- this is separated - so that the modules code can put it in dev->init. -*/ -/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */ -/* Note: this is the only limit on the number of cards supported!! */ -static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1, }; - -#ifdef MODULE -static int debug = -1; - -module_param(debug, int, 0); -module_param_array(options, int, NULL, 0); -module_param(rx_copybreak, int, 0); -module_param(max_interrupt_work, int, 0); -MODULE_PARM_DESC(debug, "3c515 debug level (0-6)"); -MODULE_PARM_DESC(options, "3c515: Bits 0-2: media type, bit 3: full duplex, bit 4: bus mastering"); -MODULE_PARM_DESC(rx_copybreak, "3c515 copy breakpoint for copy-only-tiny-frames"); -MODULE_PARM_DESC(max_interrupt_work, "3c515 maximum events handled per interrupt"); - -/* A list of all installed Vortex devices, for removing the driver module. */ -/* we will need locking (and refcounting) if we ever use it for more */ -static LIST_HEAD(root_corkscrew_dev); - -static int corkscrew_init_module(void) -{ - int found = 0; - if (debug >= 0) - corkscrew_debug = debug; - while (corkscrew_scan(-1)) - found++; - return found ? 0 : -ENODEV; -} -module_init(corkscrew_init_module); - -#else -struct net_device *tc515_probe(int unit) -{ - struct net_device *dev = corkscrew_scan(unit); - - if (!dev) - return ERR_PTR(-ENODEV); - - return dev; -} -#endif /* not MODULE */ - -static int check_device(unsigned ioaddr) -{ - int timer; - - if (!request_region(ioaddr, CORKSCREW_TOTAL_SIZE, "3c515")) - return 0; - /* Check the resource configuration for a matching ioaddr. */ - if ((inw(ioaddr + 0x2002) & 0x1f0) != (ioaddr & 0x1f0)) { - release_region(ioaddr, CORKSCREW_TOTAL_SIZE); - return 0; - } - /* Verify by reading the device ID from the EEPROM. */ - outw(EEPROM_Read + 7, ioaddr + Wn0EepromCmd); - /* Pause for at least 162 us. for the read to take place. */ - for (timer = 4; timer >= 0; timer--) { - udelay(162); - if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0) - break; - } - if (inw(ioaddr + Wn0EepromData) != 0x6d50) { - release_region(ioaddr, CORKSCREW_TOTAL_SIZE); - return 0; - } - return 1; -} - -static void cleanup_card(struct net_device *dev) -{ - struct corkscrew_private *vp = netdev_priv(dev); - list_del_init(&vp->list); - if (dev->dma) - free_dma(dev->dma); - outw(TotalReset, dev->base_addr + EL3_CMD); - release_region(dev->base_addr, CORKSCREW_TOTAL_SIZE); - if (vp->dev) - pnp_device_detach(to_pnp_dev(vp->dev)); -} - -static struct net_device *corkscrew_scan(int unit) -{ - struct net_device *dev; - static int cards_found = 0; - static int ioaddr; - int err; -#ifdef __ISAPNP__ - short i; - static int pnp_cards; -#endif - - dev = alloc_etherdev(sizeof(struct corkscrew_private)); - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - } - -#ifdef __ISAPNP__ - if(nopnp == 1) - goto no_pnp; - for(i=0; corkscrew_isapnp_adapters[i].vendor != 0; i++) { - struct pnp_dev *idev = NULL; - int irq; - while((idev = pnp_find_dev(NULL, - corkscrew_isapnp_adapters[i].vendor, - corkscrew_isapnp_adapters[i].function, - idev))) { - - if (pnp_device_attach(idev) < 0) - continue; - if (pnp_activate_dev(idev) < 0) { - pr_warn("pnp activate failed (out of resources?)\n"); - pnp_device_detach(idev); - continue; - } - if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0)) { - pnp_device_detach(idev); - continue; - } - ioaddr = pnp_port_start(idev, 0); - irq = pnp_irq(idev, 0); - if (!check_device(ioaddr)) { - pnp_device_detach(idev); - continue; - } - if(corkscrew_debug) - pr_debug("ISAPNP reports %s at i/o 0x%x, irq %d\n", - (char*) corkscrew_isapnp_adapters[i].driver_data, ioaddr, irq); - pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n", - inl(ioaddr + 0x2002), inw(ioaddr + 0x2000)); - /* irq = inw(ioaddr + 0x2002) & 15; */ /* Use the irq from isapnp */ - SET_NETDEV_DEV(dev, &idev->dev); - pnp_cards++; - err = corkscrew_setup(dev, ioaddr, idev, cards_found++); - if (!err) - return dev; - cleanup_card(dev); - } - } -no_pnp: -#endif /* __ISAPNP__ */ - - /* Check all locations on the ISA bus -- evil! */ - for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x20) { - if (!check_device(ioaddr)) - continue; - - pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n", - inl(ioaddr + 0x2002), inw(ioaddr + 0x2000)); - err = corkscrew_setup(dev, ioaddr, NULL, cards_found++); - if (!err) - return dev; - cleanup_card(dev); - } - free_netdev(dev); - return NULL; -} - - -static const struct net_device_ops netdev_ops = { - .ndo_open = corkscrew_open, - .ndo_stop = corkscrew_close, - .ndo_start_xmit = corkscrew_start_xmit, - .ndo_tx_timeout = corkscrew_timeout, - .ndo_get_stats = corkscrew_get_stats, - .ndo_set_rx_mode = set_rx_mode, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - - -static int corkscrew_setup(struct net_device *dev, int ioaddr, - struct pnp_dev *idev, int card_number) -{ - struct corkscrew_private *vp = netdev_priv(dev); - unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */ - __be16 addr[ETH_ALEN / 2]; - int i; - int irq; - -#ifdef __ISAPNP__ - if (idev) { - irq = pnp_irq(idev, 0); - vp->dev = &idev->dev; - } else { - irq = inw(ioaddr + 0x2002) & 15; - } -#else - irq = inw(ioaddr + 0x2002) & 15; -#endif - - dev->base_addr = ioaddr; - dev->irq = irq; - dev->dma = inw(ioaddr + 0x2000) & 7; - vp->product_name = "3c515"; - vp->options = dev->mem_start; - vp->our_dev = dev; - - if (!vp->options) { - if (card_number >= MAX_UNITS) - vp->options = -1; - else - vp->options = options[card_number]; - } - - if (vp->options >= 0) { - vp->media_override = vp->options & 7; - if (vp->media_override == 2) - vp->media_override = 0; - vp->full_duplex = (vp->options & 8) ? 1 : 0; - vp->bus_master = (vp->options & 16) ? 1 : 0; - } else { - vp->media_override = 7; - vp->full_duplex = 0; - vp->bus_master = 0; - } -#ifdef MODULE - list_add(&vp->list, &root_corkscrew_dev); -#endif - - pr_info("%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr); - - spin_lock_init(&vp->lock); - - timer_setup(&vp->timer, corkscrew_timer, 0); - - /* Read the station address from the EEPROM. */ - EL3WINDOW(0); - for (i = 0; i < 0x18; i++) { - int timer; - outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd); - /* Pause for at least 162 us. for the read to take place. */ - for (timer = 4; timer >= 0; timer--) { - udelay(162); - if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0) - break; - } - eeprom[i] = inw(ioaddr + Wn0EepromData); - checksum ^= eeprom[i]; - if (i < 3) - addr[i] = htons(eeprom[i]); - } - eth_hw_addr_set(dev, (u8 *)addr); - checksum = (checksum ^ (checksum >> 8)) & 0xff; - if (checksum != 0x00) - pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum); - pr_cont(" %pM", dev->dev_addr); - if (eeprom[16] == 0x11c7) { /* Corkscrew */ - if (request_dma(dev->dma, "3c515")) { - pr_cont(", DMA %d allocation failed", dev->dma); - dev->dma = 0; - } else - pr_cont(", DMA %d", dev->dma); - } - pr_cont(", IRQ %d\n", dev->irq); - /* Tell them about an invalid IRQ. */ - if (corkscrew_debug && (dev->irq <= 0 || dev->irq > 15)) - pr_warn(" *** Warning: this IRQ is unlikely to work! ***\n"); - - { - static const char * const ram_split[] = { - "5:3", "3:1", "1:1", "3:5" - }; - __u32 config; - EL3WINDOW(3); - vp->available_media = inw(ioaddr + Wn3_Options); - config = inl(ioaddr + Wn3_Config); - if (corkscrew_debug > 1) - pr_info(" Internal config register is %4.4x, transceivers %#x.\n", - config, inw(ioaddr + Wn3_Options)); - pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n", - 8 << config & Ram_size, - config & Ram_width ? "word" : "byte", - ram_split[(config & Ram_split) >> Ram_split_shift], - config & Autoselect ? "autoselect/" : "", - media_tbl[(config & Xcvr) >> Xcvr_shift].name); - vp->default_media = (config & Xcvr) >> Xcvr_shift; - vp->autoselect = config & Autoselect ? 1 : 0; - dev->if_port = vp->default_media; - } - if (vp->media_override != 7) { - pr_info(" Media override to transceiver type %d (%s).\n", - vp->media_override, - media_tbl[vp->media_override].name); - dev->if_port = vp->media_override; - } - - vp->capabilities = eeprom[16]; - vp->full_bus_master_tx = (vp->capabilities & 0x20) ? 1 : 0; - /* Rx is broken at 10mbps, so we always disable it. */ - /* vp->full_bus_master_rx = 0; */ - vp->full_bus_master_rx = (vp->capabilities & 0x20) ? 1 : 0; - - /* The 3c51x-specific entries in the device structure. */ - dev->netdev_ops = &netdev_ops; - dev->watchdog_timeo = (400 * HZ) / 1000; - dev->ethtool_ops = &netdev_ethtool_ops; - - return register_netdev(dev); -} - - -static int corkscrew_open(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - struct corkscrew_private *vp = netdev_priv(dev); - bool armtimer = false; - __u32 config; - int i; - - /* Before initializing select the active media port. */ - EL3WINDOW(3); - if (vp->full_duplex) - outb(0x20, ioaddr + Wn3_MAC_Ctrl); /* Set the full-duplex bit. */ - config = inl(ioaddr + Wn3_Config); - - if (vp->media_override != 7) { - if (corkscrew_debug > 1) - pr_info("%s: Media override to transceiver %d (%s).\n", - dev->name, vp->media_override, - media_tbl[vp->media_override].name); - dev->if_port = vp->media_override; - } else if (vp->autoselect) { - /* Find first available media type, starting with 100baseTx. */ - dev->if_port = 4; - while (!(vp->available_media & media_tbl[dev->if_port].mask)) - dev->if_port = media_tbl[dev->if_port].next; - - if (corkscrew_debug > 1) - pr_debug("%s: Initial media type %s.\n", - dev->name, media_tbl[dev->if_port].name); - armtimer = true; - } else - dev->if_port = vp->default_media; - - config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift); - outl(config, ioaddr + Wn3_Config); - - if (corkscrew_debug > 1) { - pr_debug("%s: corkscrew_open() InternalConfig %8.8x.\n", - dev->name, config); - } - - outw(TxReset, ioaddr + EL3_CMD); - for (i = 20; i >= 0; i--) - if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress)) - break; - - outw(RxReset, ioaddr + EL3_CMD); - /* Wait a few ticks for the RxReset command to complete. */ - for (i = 20; i >= 0; i--) - if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress)) - break; - - outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD); - - /* Use the now-standard shared IRQ implementation. */ - if (vp->capabilities == 0x11c7) { - /* Corkscrew: Cannot share ISA resources. */ - if (dev->irq == 0 || - dev->dma == 0 || - request_irq(dev->irq, corkscrew_interrupt, 0, - vp->product_name, dev)) - return -EAGAIN; - enable_dma(dev->dma); - set_dma_mode(dev->dma, DMA_MODE_CASCADE); - } else if (request_irq(dev->irq, corkscrew_interrupt, IRQF_SHARED, - vp->product_name, dev)) { - return -EAGAIN; - } - - if (armtimer) - mod_timer(&vp->timer, jiffies + media_tbl[dev->if_port].wait); - - if (corkscrew_debug > 1) { - EL3WINDOW(4); - pr_debug("%s: corkscrew_open() irq %d media status %4.4x.\n", - dev->name, dev->irq, inw(ioaddr + Wn4_Media)); - } - - /* Set the station address and mask in window 2 each time opened. */ - EL3WINDOW(2); - for (i = 0; i < 6; i++) - outb(dev->dev_addr[i], ioaddr + i); - for (; i < 12; i += 2) - outw(0, ioaddr + i); - - if (dev->if_port == 3) - /* Start the thinnet transceiver. We should really wait 50ms... */ - outw(StartCoax, ioaddr + EL3_CMD); - EL3WINDOW(4); - outw((inw(ioaddr + Wn4_Media) & ~(Media_10TP | Media_SQE)) | - media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media); - - /* Switch to the stats window, and clear all stats by reading. */ - outw(StatsDisable, ioaddr + EL3_CMD); - EL3WINDOW(6); - for (i = 0; i < 10; i++) - inb(ioaddr + i); - inw(ioaddr + 10); - inw(ioaddr + 12); - /* New: On the Vortex we must also clear the BadSSD counter. */ - EL3WINDOW(4); - inb(ioaddr + 12); - /* ..and on the Boomerang we enable the extra statistics bits. */ - outw(0x0040, ioaddr + Wn4_NetDiag); - - /* Switch to register set 7 for normal use. */ - EL3WINDOW(7); - - if (vp->full_bus_master_rx) { /* Boomerang bus master. */ - vp->cur_rx = vp->dirty_rx = 0; - if (corkscrew_debug > 2) - pr_debug("%s: Filling in the Rx ring.\n", dev->name); - for (i = 0; i < RX_RING_SIZE; i++) { - struct sk_buff *skb; - if (i < (RX_RING_SIZE - 1)) - vp->rx_ring[i].next = - isa_virt_to_bus(&vp->rx_ring[i + 1]); - else - vp->rx_ring[i].next = 0; - vp->rx_ring[i].status = 0; /* Clear complete bit. */ - vp->rx_ring[i].length = PKT_BUF_SZ | 0x80000000; - skb = netdev_alloc_skb(dev, PKT_BUF_SZ); - vp->rx_skbuff[i] = skb; - if (skb == NULL) - break; /* Bad news! */ - skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ - vp->rx_ring[i].addr = isa_virt_to_bus(skb->data); - } - if (i != 0) - vp->rx_ring[i - 1].next = - isa_virt_to_bus(&vp->rx_ring[0]); /* Wrap the ring. */ - outl(isa_virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr); - } - if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */ - vp->cur_tx = vp->dirty_tx = 0; - outb(PKT_BUF_SZ >> 8, ioaddr + TxFreeThreshold); /* Room for a packet. */ - /* Clear the Tx ring. */ - for (i = 0; i < TX_RING_SIZE; i++) - vp->tx_skbuff[i] = NULL; - outl(0, ioaddr + DownListPtr); - } - /* Set receiver mode: presumably accept b-case and phys addr only. */ - set_rx_mode(dev); - outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ - - netif_start_queue(dev); - - outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ - outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ - /* Allow status bits to be seen. */ - outw(SetStatusEnb | AdapterFailure | IntReq | StatsFull | - (vp->full_bus_master_tx ? DownComplete : TxAvailable) | - (vp->full_bus_master_rx ? UpComplete : RxComplete) | - (vp->bus_master ? DMADone : 0), ioaddr + EL3_CMD); - /* Ack all pending events, and set active indicator mask. */ - outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, - ioaddr + EL3_CMD); - outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull - | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete, - ioaddr + EL3_CMD); - - return 0; -} - -static void corkscrew_timer(struct timer_list *t) -{ -#ifdef AUTOMEDIA - struct corkscrew_private *vp = timer_container_of(vp, t, timer); - struct net_device *dev = vp->our_dev; - int ioaddr = dev->base_addr; - unsigned long flags; - int ok = 0; - - if (corkscrew_debug > 1) - pr_debug("%s: Media selection timer tick happened, %s.\n", - dev->name, media_tbl[dev->if_port].name); - - spin_lock_irqsave(&vp->lock, flags); - - { - int old_window = inw(ioaddr + EL3_CMD) >> 13; - int media_status; - EL3WINDOW(4); - media_status = inw(ioaddr + Wn4_Media); - switch (dev->if_port) { - case 0: - case 4: - case 5: /* 10baseT, 100baseTX, 100baseFX */ - if (media_status & Media_LnkBeat) { - ok = 1; - if (corkscrew_debug > 1) - pr_debug("%s: Media %s has link beat, %x.\n", - dev->name, - media_tbl[dev->if_port].name, - media_status); - } else if (corkscrew_debug > 1) - pr_debug("%s: Media %s is has no link beat, %x.\n", - dev->name, - media_tbl[dev->if_port].name, - media_status); - - break; - default: /* Other media types handled by Tx timeouts. */ - if (corkscrew_debug > 1) - pr_debug("%s: Media %s is has no indication, %x.\n", - dev->name, - media_tbl[dev->if_port].name, - media_status); - ok = 1; - } - if (!ok) { - __u32 config; - - do { - dev->if_port = - media_tbl[dev->if_port].next; - } - while (!(vp->available_media & media_tbl[dev->if_port].mask)); - - if (dev->if_port == 8) { /* Go back to default. */ - dev->if_port = vp->default_media; - if (corkscrew_debug > 1) - pr_debug("%s: Media selection failing, using default %s port.\n", - dev->name, - media_tbl[dev->if_port].name); - } else { - if (corkscrew_debug > 1) - pr_debug("%s: Media selection failed, now trying %s port.\n", - dev->name, - media_tbl[dev->if_port].name); - vp->timer.expires = jiffies + media_tbl[dev->if_port].wait; - add_timer(&vp->timer); - } - outw((media_status & ~(Media_10TP | Media_SQE)) | - media_tbl[dev->if_port].media_bits, - ioaddr + Wn4_Media); - - EL3WINDOW(3); - config = inl(ioaddr + Wn3_Config); - config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift); - outl(config, ioaddr + Wn3_Config); - - outw(dev->if_port == 3 ? StartCoax : StopCoax, - ioaddr + EL3_CMD); - } - EL3WINDOW(old_window); - } - - spin_unlock_irqrestore(&vp->lock, flags); - if (corkscrew_debug > 1) - pr_debug("%s: Media selection timer finished, %s.\n", - dev->name, media_tbl[dev->if_port].name); - -#endif /* AUTOMEDIA */ -} - -static void corkscrew_timeout(struct net_device *dev, unsigned int txqueue) -{ - int i; - struct corkscrew_private *vp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - pr_warn("%s: transmit timed out, tx_status %2.2x status %4.4x\n", - dev->name, inb(ioaddr + TxStatus), - inw(ioaddr + EL3_STATUS)); - /* Slight code bloat to be user friendly. */ - if ((inb(ioaddr + TxStatus) & 0x88) == 0x88) - pr_warn("%s: Transmitter encountered 16 collisions -- network cable problem?\n", - dev->name); -#ifndef final_version - pr_debug(" Flags; bus-master %d, full %d; dirty %d current %d.\n", - vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx, - vp->cur_tx); - pr_debug(" Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr), - &vp->tx_ring[0]); - for (i = 0; i < TX_RING_SIZE; i++) { - pr_debug(" %d: %p length %8.8x status %8.8x\n", i, - &vp->tx_ring[i], - vp->tx_ring[i].length, vp->tx_ring[i].status); - } -#endif - /* Issue TX_RESET and TX_START commands. */ - outw(TxReset, ioaddr + EL3_CMD); - for (i = 20; i >= 0; i--) - if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress)) - break; - outw(TxEnable, ioaddr + EL3_CMD); - netif_trans_update(dev); /* prevent tx timeout */ - dev->stats.tx_errors++; - dev->stats.tx_dropped++; - netif_wake_queue(dev); -} - -static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct corkscrew_private *vp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - /* Block a timer-based transmit from overlapping. */ - - netif_stop_queue(dev); - - if (vp->full_bus_master_tx) { /* BOOMERANG bus-master */ - /* Calculate the next Tx descriptor entry. */ - int entry = vp->cur_tx % TX_RING_SIZE; - struct boom_tx_desc *prev_entry; - unsigned long flags; - int i; - - if (vp->tx_full) /* No room to transmit with */ - return NETDEV_TX_BUSY; - if (vp->cur_tx != 0) - prev_entry = &vp->tx_ring[(vp->cur_tx - 1) % TX_RING_SIZE]; - else - prev_entry = NULL; - if (corkscrew_debug > 3) - pr_debug("%s: Trying to send a packet, Tx index %d.\n", - dev->name, vp->cur_tx); - /* vp->tx_full = 1; */ - vp->tx_skbuff[entry] = skb; - vp->tx_ring[entry].next = 0; - vp->tx_ring[entry].addr = isa_virt_to_bus(skb->data); - vp->tx_ring[entry].length = skb->len | 0x80000000; - vp->tx_ring[entry].status = skb->len | 0x80000000; - - spin_lock_irqsave(&vp->lock, flags); - outw(DownStall, ioaddr + EL3_CMD); - /* Wait for the stall to complete. */ - for (i = 20; i >= 0; i--) - if ((inw(ioaddr + EL3_STATUS) & CmdInProgress) == 0) - break; - if (prev_entry) - prev_entry->next = isa_virt_to_bus(&vp->tx_ring[entry]); - if (inl(ioaddr + DownListPtr) == 0) { - outl(isa_virt_to_bus(&vp->tx_ring[entry]), - ioaddr + DownListPtr); - queued_packet++; - } - outw(DownUnstall, ioaddr + EL3_CMD); - spin_unlock_irqrestore(&vp->lock, flags); - - vp->cur_tx++; - if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1) - vp->tx_full = 1; - else { /* Clear previous interrupt enable. */ - if (prev_entry) - prev_entry->status &= ~0x80000000; - netif_wake_queue(dev); - } - return NETDEV_TX_OK; - } - /* Put out the doubleword header... */ - outl(skb->len, ioaddr + TX_FIFO); - dev->stats.tx_bytes += skb->len; -#ifdef VORTEX_BUS_MASTER - if (vp->bus_master) { - /* Set the bus-master controller to transfer the packet. */ - outl(isa_virt_to_bus(skb->data), ioaddr + Wn7_MasterAddr); - outw((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen); - vp->tx_skb = skb; - outw(StartDMADown, ioaddr + EL3_CMD); - /* queue will be woken at the DMADone interrupt. */ - } else { - /* ... and the packet rounded to a doubleword. */ - outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); - dev_kfree_skb(skb); - if (inw(ioaddr + TxFree) > 1536) { - netif_wake_queue(dev); - } else - /* Interrupt us when the FIFO has room for max-sized packet. */ - outw(SetTxThreshold + (1536 >> 2), - ioaddr + EL3_CMD); - } -#else - /* ... and the packet rounded to a doubleword. */ - outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); - dev_kfree_skb(skb); - if (inw(ioaddr + TxFree) > 1536) { - netif_wake_queue(dev); - } else - /* Interrupt us when the FIFO has room for max-sized packet. */ - outw(SetTxThreshold + (1536 >> 2), ioaddr + EL3_CMD); -#endif /* bus master */ - - - /* Clear the Tx status stack. */ - { - short tx_status; - int i = 4; - - while (--i > 0 && (tx_status = inb(ioaddr + TxStatus)) > 0) { - if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */ - if (corkscrew_debug > 2) - pr_debug("%s: Tx error, status %2.2x.\n", - dev->name, tx_status); - if (tx_status & 0x04) - dev->stats.tx_fifo_errors++; - if (tx_status & 0x38) - dev->stats.tx_aborted_errors++; - if (tx_status & 0x30) { - int j; - outw(TxReset, ioaddr + EL3_CMD); - for (j = 20; j >= 0; j--) - if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress)) - break; - } - outw(TxEnable, ioaddr + EL3_CMD); - } - outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */ - } - } - return NETDEV_TX_OK; -} - -/* The interrupt handler does all of the Rx thread work and cleans up - after the Tx thread. */ - -static irqreturn_t corkscrew_interrupt(int irq, void *dev_id) -{ - /* Use the now-standard shared IRQ implementation. */ - struct net_device *dev = dev_id; - struct corkscrew_private *lp = netdev_priv(dev); - int ioaddr, status; - int latency; - int i = max_interrupt_work; - - ioaddr = dev->base_addr; - latency = inb(ioaddr + Timer); - - spin_lock(&lp->lock); - - status = inw(ioaddr + EL3_STATUS); - - if (corkscrew_debug > 4) - pr_debug("%s: interrupt, status %4.4x, timer %d.\n", - dev->name, status, latency); - if ((status & 0xE000) != 0xE000) { - static int donedidthis; - /* Some interrupt controllers store a bogus interrupt from boot-time. - Ignore a single early interrupt, but don't hang the machine for - other interrupt problems. */ - if (donedidthis++ > 100) { - pr_err("%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n", - dev->name, status, netif_running(dev)); - free_irq(dev->irq, dev); - dev->irq = -1; - } - } - - do { - if (corkscrew_debug > 5) - pr_debug("%s: In interrupt loop, status %4.4x.\n", - dev->name, status); - if (status & RxComplete) - corkscrew_rx(dev); - - if (status & TxAvailable) { - if (corkscrew_debug > 5) - pr_debug(" TX room bit was handled.\n"); - /* There's room in the FIFO for a full-sized packet. */ - outw(AckIntr | TxAvailable, ioaddr + EL3_CMD); - netif_wake_queue(dev); - } - if (status & DownComplete) { - unsigned int dirty_tx = lp->dirty_tx; - - while (lp->cur_tx - dirty_tx > 0) { - int entry = dirty_tx % TX_RING_SIZE; - if (inl(ioaddr + DownListPtr) == isa_virt_to_bus(&lp->tx_ring[entry])) - break; /* It still hasn't been processed. */ - if (lp->tx_skbuff[entry]) { - dev_consume_skb_irq(lp->tx_skbuff[entry]); - lp->tx_skbuff[entry] = NULL; - } - dirty_tx++; - } - lp->dirty_tx = dirty_tx; - outw(AckIntr | DownComplete, ioaddr + EL3_CMD); - if (lp->tx_full && (lp->cur_tx - dirty_tx <= TX_RING_SIZE - 1)) { - lp->tx_full = 0; - netif_wake_queue(dev); - } - } -#ifdef VORTEX_BUS_MASTER - if (status & DMADone) { - outw(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */ - dev_consume_skb_irq(lp->tx_skb); /* Release the transferred buffer */ - netif_wake_queue(dev); - } -#endif - if (status & UpComplete) { - boomerang_rx(dev); - outw(AckIntr | UpComplete, ioaddr + EL3_CMD); - } - if (status & (AdapterFailure | RxEarly | StatsFull)) { - /* Handle all uncommon interrupts at once. */ - if (status & RxEarly) { /* Rx early is unused. */ - corkscrew_rx(dev); - outw(AckIntr | RxEarly, ioaddr + EL3_CMD); - } - if (status & StatsFull) { /* Empty statistics. */ - static int DoneDidThat; - if (corkscrew_debug > 4) - pr_debug("%s: Updating stats.\n", dev->name); - update_stats(ioaddr, dev); - /* DEBUG HACK: Disable statistics as an interrupt source. */ - /* This occurs when we have the wrong media type! */ - if (DoneDidThat == 0 && inw(ioaddr + EL3_STATUS) & StatsFull) { - int win, reg; - pr_notice("%s: Updating stats failed, disabling stats as an interrupt source.\n", - dev->name); - for (win = 0; win < 8; win++) { - EL3WINDOW(win); - pr_notice("Vortex window %d:", win); - for (reg = 0; reg < 16; reg++) - pr_cont(" %2.2x", inb(ioaddr + reg)); - pr_cont("\n"); - } - EL3WINDOW(7); - outw(SetIntrEnb | TxAvailable | - RxComplete | AdapterFailure | - UpComplete | DownComplete | - TxComplete, ioaddr + EL3_CMD); - DoneDidThat++; - } - } - if (status & AdapterFailure) { - /* Adapter failure requires Rx reset and reinit. */ - outw(RxReset, ioaddr + EL3_CMD); - /* Set the Rx filter to the current state. */ - set_rx_mode(dev); - outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */ - outw(AckIntr | AdapterFailure, - ioaddr + EL3_CMD); - } - } - - if (--i < 0) { - pr_err("%s: Too much work in interrupt, status %4.4x. Disabling functions (%4.4x).\n", - dev->name, status, SetStatusEnb | ((~status) & 0x7FE)); - /* Disable all pending interrupts. */ - outw(SetStatusEnb | ((~status) & 0x7FE), ioaddr + EL3_CMD); - outw(AckIntr | 0x7FF, ioaddr + EL3_CMD); - break; - } - /* Acknowledge the IRQ. */ - outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); - - } while ((status = inw(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete)); - - spin_unlock(&lp->lock); - - if (corkscrew_debug > 4) - pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, status); - return IRQ_HANDLED; -} - -static int corkscrew_rx(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - int i; - short rx_status; - - if (corkscrew_debug > 5) - pr_debug(" In rx_packet(), status %4.4x, rx_status %4.4x.\n", - inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus)); - while ((rx_status = inw(ioaddr + RxStatus)) > 0) { - if (rx_status & 0x4000) { /* Error, update stats. */ - unsigned char rx_error = inb(ioaddr + RxErrors); - if (corkscrew_debug > 2) - pr_debug(" Rx error: status %2.2x.\n", - rx_error); - dev->stats.rx_errors++; - if (rx_error & 0x01) - dev->stats.rx_over_errors++; - if (rx_error & 0x02) - dev->stats.rx_length_errors++; - if (rx_error & 0x04) - dev->stats.rx_frame_errors++; - if (rx_error & 0x08) - dev->stats.rx_crc_errors++; - if (rx_error & 0x10) - dev->stats.rx_length_errors++; - } else { - /* The packet length: up to 4.5K!. */ - short pkt_len = rx_status & 0x1fff; - struct sk_buff *skb; - - skb = netdev_alloc_skb(dev, pkt_len + 5 + 2); - if (corkscrew_debug > 4) - pr_debug("Receiving packet size %d status %4.4x.\n", - pkt_len, rx_status); - if (skb != NULL) { - skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ - /* 'skb_put()' points to the start of sk_buff data area. */ - insl(ioaddr + RX_FIFO, - skb_put(skb, pkt_len), - (pkt_len + 3) >> 2); - outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */ - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - /* Wait a limited time to go to next packet. */ - for (i = 200; i >= 0; i--) - if (! (inw(ioaddr + EL3_STATUS) & CmdInProgress)) - break; - continue; - } else if (corkscrew_debug) - pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len); - } - outw(RxDiscard, ioaddr + EL3_CMD); - dev->stats.rx_dropped++; - /* Wait a limited time to skip this packet. */ - for (i = 200; i >= 0; i--) - if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress)) - break; - } - return 0; -} - -static int boomerang_rx(struct net_device *dev) -{ - struct corkscrew_private *vp = netdev_priv(dev); - int entry = vp->cur_rx % RX_RING_SIZE; - int ioaddr = dev->base_addr; - int rx_status; - - if (corkscrew_debug > 5) - pr_debug(" In boomerang_rx(), status %4.4x, rx_status %4.4x.\n", - inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus)); - while ((rx_status = vp->rx_ring[entry].status) & RxDComplete) { - if (rx_status & RxDError) { /* Error, update stats. */ - unsigned char rx_error = rx_status >> 16; - if (corkscrew_debug > 2) - pr_debug(" Rx error: status %2.2x.\n", - rx_error); - dev->stats.rx_errors++; - if (rx_error & 0x01) - dev->stats.rx_over_errors++; - if (rx_error & 0x02) - dev->stats.rx_length_errors++; - if (rx_error & 0x04) - dev->stats.rx_frame_errors++; - if (rx_error & 0x08) - dev->stats.rx_crc_errors++; - if (rx_error & 0x10) - dev->stats.rx_length_errors++; - } else { - /* The packet length: up to 4.5K!. */ - short pkt_len = rx_status & 0x1fff; - struct sk_buff *skb; - - dev->stats.rx_bytes += pkt_len; - if (corkscrew_debug > 4) - pr_debug("Receiving packet size %d status %4.4x.\n", - pkt_len, rx_status); - - /* Check if the packet is long enough to just accept without - copying to a properly sized skbuff. */ - if (pkt_len < rx_copybreak && - (skb = netdev_alloc_skb(dev, pkt_len + 4)) != NULL) { - skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ - /* 'skb_put()' points to the start of sk_buff data area. */ - skb_put_data(skb, - isa_bus_to_virt(vp->rx_ring[entry].addr), - pkt_len); - rx_copy++; - } else { - void *temp; - /* Pass up the skbuff already on the Rx ring. */ - skb = vp->rx_skbuff[entry]; - vp->rx_skbuff[entry] = NULL; - temp = skb_put(skb, pkt_len); - /* Remove this checking code for final release. */ - if (isa_bus_to_virt(vp->rx_ring[entry].addr) != temp) - pr_warn("%s: Warning -- the skbuff addresses do not match in boomerang_rx: %p vs. %p / %p\n", - dev->name, - isa_bus_to_virt(vp->rx_ring[entry].addr), - skb->head, temp); - rx_nocopy++; - } - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_packets++; - } - entry = (++vp->cur_rx) % RX_RING_SIZE; - } - /* Refill the Rx ring buffers. */ - for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) { - struct sk_buff *skb; - entry = vp->dirty_rx % RX_RING_SIZE; - if (vp->rx_skbuff[entry] == NULL) { - skb = netdev_alloc_skb(dev, PKT_BUF_SZ); - if (skb == NULL) - break; /* Bad news! */ - skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ - vp->rx_ring[entry].addr = isa_virt_to_bus(skb->data); - vp->rx_skbuff[entry] = skb; - } - vp->rx_ring[entry].status = 0; /* Clear complete bit. */ - } - return 0; -} - -static int corkscrew_close(struct net_device *dev) -{ - struct corkscrew_private *vp = netdev_priv(dev); - int ioaddr = dev->base_addr; - int i; - - netif_stop_queue(dev); - - if (corkscrew_debug > 1) { - pr_debug("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n", - dev->name, inw(ioaddr + EL3_STATUS), - inb(ioaddr + TxStatus)); - pr_debug("%s: corkscrew close stats: rx_nocopy %d rx_copy %d tx_queued %d.\n", - dev->name, rx_nocopy, rx_copy, queued_packet); - } - - timer_delete_sync(&vp->timer); - - /* Turn off statistics ASAP. We update lp->stats below. */ - outw(StatsDisable, ioaddr + EL3_CMD); - - /* Disable the receiver and transmitter. */ - outw(RxDisable, ioaddr + EL3_CMD); - outw(TxDisable, ioaddr + EL3_CMD); - - if (dev->if_port == XCVR_10base2) - /* Turn off thinnet power. Green! */ - outw(StopCoax, ioaddr + EL3_CMD); - - free_irq(dev->irq, dev); - - outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); - - update_stats(ioaddr, dev); - if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */ - outl(0, ioaddr + UpListPtr); - for (i = 0; i < RX_RING_SIZE; i++) - if (vp->rx_skbuff[i]) { - dev_kfree_skb(vp->rx_skbuff[i]); - vp->rx_skbuff[i] = NULL; - } - } - if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */ - outl(0, ioaddr + DownListPtr); - for (i = 0; i < TX_RING_SIZE; i++) - if (vp->tx_skbuff[i]) { - dev_kfree_skb(vp->tx_skbuff[i]); - vp->tx_skbuff[i] = NULL; - } - } - - return 0; -} - -static struct net_device_stats *corkscrew_get_stats(struct net_device *dev) -{ - struct corkscrew_private *vp = netdev_priv(dev); - unsigned long flags; - - if (netif_running(dev)) { - spin_lock_irqsave(&vp->lock, flags); - update_stats(dev->base_addr, dev); - spin_unlock_irqrestore(&vp->lock, flags); - } - return &dev->stats; -} - -/* Update statistics. - Unlike with the EL3 we need not worry about interrupts changing - the window setting from underneath us, but we must still guard - against a race condition with a StatsUpdate interrupt updating the - table. This is done by checking that the ASM (!) code generated uses - atomic updates with '+='. - */ -static void update_stats(int ioaddr, struct net_device *dev) -{ - /* Unlike the 3c5x9 we need not turn off stats updates while reading. */ - /* Switch to the stats window, and read everything. */ - EL3WINDOW(6); - dev->stats.tx_carrier_errors += inb(ioaddr + 0); - dev->stats.tx_heartbeat_errors += inb(ioaddr + 1); - /* Multiple collisions. */ inb(ioaddr + 2); - dev->stats.collisions += inb(ioaddr + 3); - dev->stats.tx_window_errors += inb(ioaddr + 4); - dev->stats.rx_fifo_errors += inb(ioaddr + 5); - dev->stats.tx_packets += inb(ioaddr + 6); - dev->stats.tx_packets += (inb(ioaddr + 9) & 0x30) << 4; - /* Rx packets */ inb(ioaddr + 7); - /* Must read to clear */ - /* Tx deferrals */ inb(ioaddr + 8); - /* Don't bother with register 9, an extension of registers 6&7. - If we do use the 6&7 values the atomic update assumption above - is invalid. */ - inw(ioaddr + 10); /* Total Rx and Tx octets. */ - inw(ioaddr + 12); - /* New: On the Vortex we must also clear the BadSSD counter. */ - EL3WINDOW(4); - inb(ioaddr + 12); - - /* We change back to window 7 (not 1) with the Vortex. */ - EL3WINDOW(7); -} - -/* This new version of set_rx_mode() supports v1.4 kernels. - The Vortex chip has no documented multicast filter, so the only - multicast setting is to receive all multicast frames. At least - the chip has a very clean way to set the mode, unlike many others. */ -static void set_rx_mode(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - unsigned short new_mode; - - if (dev->flags & IFF_PROMISC) { - if (corkscrew_debug > 3) - pr_debug("%s: Setting promiscuous mode.\n", - dev->name); - new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm; - } else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) { - new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast; - } else - new_mode = SetRxFilter | RxStation | RxBroadcast; - - outw(new_mode, ioaddr + EL3_CMD); -} - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strscpy(info->driver, DRV_NAME, sizeof(info->driver)); - snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", - dev->base_addr); -} - -static u32 netdev_get_msglevel(struct net_device *dev) -{ - return corkscrew_debug; -} - -static void netdev_set_msglevel(struct net_device *dev, u32 level) -{ - corkscrew_debug = level; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, - .get_msglevel = netdev_get_msglevel, - .set_msglevel = netdev_set_msglevel, -}; - -#ifdef MODULE -static void __exit corkscrew_exit_module(void) -{ - while (!list_empty(&root_corkscrew_dev)) { - struct net_device *dev; - struct corkscrew_private *vp; - - vp = list_entry(root_corkscrew_dev.next, - struct corkscrew_private, list); - dev = vp->our_dev; - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } -} -module_exit(corkscrew_exit_module); -#endif /* MODULE */
diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig index c05a1b6..3fd3202 100644 --- a/drivers/net/ethernet/3com/Kconfig +++ b/drivers/net/ethernet/3com/Kconfig
@@ -17,17 +17,6 @@ if NET_VENDOR_3COM -config 3C515 - tristate "3c515 ISA \"Fast EtherLink\"" - depends on ISA && ISA_DMA_API && !PPC32 - select NETDEV_LEGACY_INIT - help - If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet - network card, say Y here. - - To compile this driver as a module, choose M here. The module - will be called 3c515. - config PCMCIA_3C574 tristate "3Com 3c574 PCMCIA support" depends on PCMCIA && HAS_IOPORT
diff --git a/drivers/net/ethernet/3com/Makefile b/drivers/net/ethernet/3com/Makefile index f7623fa..babfd93 100644 --- a/drivers/net/ethernet/3com/Makefile +++ b/drivers/net/ethernet/3com/Makefile
@@ -3,7 +3,6 @@ # Makefile for the 3Com Ethernet device drivers # -obj-$(CONFIG_3C515) += 3c515.o obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o obj-$(CONFIG_VORTEX) += 3c59x.o
diff --git a/include/net/Space.h b/include/net/Space.h index ef42629..2452a47 100644 --- a/include/net/Space.h +++ b/include/net/Space.h
@@ -8,5 +8,4 @@ struct net_device *wd_probe(int unit); struct net_device *ne_probe(int unit); struct net_device *smc_init(int unit); struct net_device *cs89x0_probe(int unit); -struct net_device *tc515_probe(int unit); struct net_device *lance_probe(int unit);