blob: a20dccbafd94e7c276875e65adc0e3acce23341a [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/ti,am65-pci-host.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI AM65 PCI Host
maintainers:
- Kishon Vijay Abraham I <kishon@ti.com>
allOf:
- $ref: /schemas/pci/pci-bus.yaml#
properties:
compatible:
enum:
- ti,am654-pcie-rc
- ti,keystone-pcie
reg:
maxItems: 4
reg-names:
items:
- const: app
- const: dbics
- const: config
- const: atu
interrupts:
maxItems: 1
power-domains:
maxItems: 1
ti,syscon-pcie-id:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: Phandle to the SYSCON entry
- description: pcie_device_id register offset within SYSCON
description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID
ti,syscon-pcie-mode:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: Phandle to the SYSCON entry
- description: pcie_ctrl register offset within SYSCON
description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
msi-map: true
dma-coherent: true
required:
- compatible
- reg
- reg-names
- max-link-speed
- ti,syscon-pcie-id
- ti,syscon-pcie-mode
- ranges
if:
properties:
compatible:
enum:
- ti,am654-pcie-rc
then:
required:
- dma-coherent
- power-domains
- msi-map
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/soc/ti,sci_pm_domain.h>
pcie0_rc: pcie@5500000 {
compatible = "ti,am654-pcie-rc";
reg = <0x5500000 0x1000>,
<0x5501000 0x1000>,
<0x10000000 0x2000>,
<0x5506000 0x1000>;
reg-names = "app", "dbics", "config", "atu";
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x81000000 0 0 0x10020000 0 0x00010000>,
<0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>;
ti,syscon-pcie-id = <&scm_conf 0x0210>;
ti,syscon-pcie-mode = <&scm_conf 0x4060>;
bus-range = <0x0 0xff>;
max-link-speed = <2>;
dma-coherent;
interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
msi-map = <0x0 &gic_its 0x0 0x10000>;
device_type = "pci";
};