Merge tag 'v2.6.35-rc4-dts-raw'
Linux 2.6.35-rc4
diff --git a/src/powerpc/lite5200.dts b/src/powerpc/lite5200.dts
index 82ff2b1..179a178 100644
--- a/src/powerpc/lite5200.dts
+++ b/src/powerpc/lite5200.dts
@@ -134,12 +134,16 @@
compatible = "fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
gpio@c00 {
compatible = "fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
spi@f00 {
@@ -230,8 +234,8 @@
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
- phy0: ethernet-phy@1 {
- reg = <1>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
};
};
@@ -255,7 +259,13 @@
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
};
+
sram@8000 {
compatible = "fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
@@ -281,4 +291,18 @@
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
+
+ localbus {
+ compatible = "fsl,mpc5200-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xff000000 0x01000000>;
+
+ flash@0,0 {
+ compatible = "amd,am29lv652d", "cfi-flash";
+ reg = <0 0 0x01000000>;
+ bank-width = <1>;
+ };
+ };
};
diff --git a/src/powerpc/lite5200b.dts b/src/powerpc/lite5200b.dts
index e45a63b..59702ac 100644
--- a/src/powerpc/lite5200b.dts
+++ b/src/powerpc/lite5200b.dts
@@ -259,6 +259,11 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
};
sram@8000 {
