Merge tag 'v5.0-rc2-dts-raw'
Linux 5.0-rc2
diff --git a/Bindings/reset/socfpga-reset.txt b/Bindings/reset/socfpga-reset.txt
index 98c9f56..38fe34f 100644
--- a/Bindings/reset/socfpga-reset.txt
+++ b/Bindings/reset/socfpga-reset.txt
@@ -1,7 +1,8 @@
Altera SOCFPGA Reset Manager
Required properties:
-- compatible : "altr,rst-mgr"
+- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10)
+ "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC
- reg : Should contain 1 register ranges(address and length)
- altr,modrst-offset : Should contain the offset of the first modrst register.
- #reset-cells: 1
diff --git a/Bindings/reset/uniphier-reset.txt b/Bindings/reset/uniphier-reset.txt
index 101743d..ea00517 100644
--- a/Bindings/reset/uniphier-reset.txt
+++ b/Bindings/reset/uniphier-reset.txt
@@ -120,27 +120,30 @@
};
-USB3 core reset
----------------
+Peripheral core reset in glue layer
+-----------------------------------
-USB3 core reset belongs to USB3 glue layer. Before using the core reset,
-it is necessary to control the clocks and resets to enable this layer.
-These clocks and resets should be described in each property.
+Some peripheral core reset belongs to its own glue layer. Before using
+this core reset, it is necessary to control the clocks and resets to enable
+this layer. These clocks and resets should be described in each property.
Required properties:
- compatible: Should be
- "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC
- "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC
- "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC
- "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC
+ "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3
+ "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3
+ "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3
+ "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3
+ "socionext,uniphier-pro4-ahci-reset" - for Pro4 SoC AHCI
+ "socionext,uniphier-pxs2-ahci-reset" - for PXs2 SoC AHCI
+ "socionext,uniphier-pxs3-ahci-reset" - for PXs3 SoC AHCI
- #reset-cells: Should be 1.
- reg: Specifies offset and length of the register set for the device.
-- clocks: A list of phandles to the clock gate for USB3 glue layer.
+- clocks: A list of phandles to the clock gate for the glue layer.
According to the clock-names, appropriate clocks are required.
- clock-names: Should contain
"gio", "link" - for Pro4 SoC
"link" - for others
-- resets: A list of phandles to the reset control for USB3 glue layer.
+- resets: A list of phandles to the reset control for the glue layer.
According to the reset-names, appropriate resets are required.
- reset-names: Should contain
"gio", "link" - for Pro4 SoC
diff --git a/src/arm/da850-evm.dts b/src/arm/da850-evm.dts
index a3c9b34..f04bc3e 100644
--- a/src/arm/da850-evm.dts
+++ b/src/arm/da850-evm.dts
@@ -94,6 +94,28 @@
regulator-boot-on;
};
+ baseboard_3v3: fixedregulator-3v3 {
+ /* TPS73701DCQ */
+ compatible = "regulator-fixed";
+ regulator-name = "baseboard_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vbat>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ baseboard_1v8: fixedregulator-1v8 {
+ /* TPS73701DCQ */
+ compatible = "regulator-fixed";
+ regulator-name = "baseboard_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vbat>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
backlight_lcd: backlight-regulator {
compatible = "regulator-fixed";
regulator-name = "lcd_backlight_pwr";
@@ -105,7 +127,7 @@
sound {
compatible = "simple-audio-card";
- simple-audio-card,name = "DA850/OMAP-L138 EVM";
+ simple-audio-card,name = "DA850-OMAPL138 EVM";
simple-audio-card,widgets =
"Line", "Line In",
"Line", "Line Out";
@@ -210,10 +232,9 @@
/* Regulators */
IOVDD-supply = <&vdcdc2_reg>;
- /* Derived from VBAT: Baseboard 3.3V / 1.8V */
- AVDD-supply = <&vbat>;
- DRVDD-supply = <&vbat>;
- DVDD-supply = <&vbat>;
+ AVDD-supply = <&baseboard_3v3>;
+ DRVDD-supply = <&baseboard_3v3>;
+ DVDD-supply = <&baseboard_1v8>;
};
tca6416: gpio@20 {
compatible = "ti,tca6416";
diff --git a/src/arm/da850-lcdk.dts b/src/arm/da850-lcdk.dts
index 0177e3e..3a2fa6e 100644
--- a/src/arm/da850-lcdk.dts
+++ b/src/arm/da850-lcdk.dts
@@ -39,9 +39,39 @@
};
};
+ vcc_5vd: fixedregulator-vcc_5vd {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5vd";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ vcc_3v3d: fixedregulator-vcc_3v3d {
+ /* TPS650250 - VDCDC1 */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3d";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_5vd>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_1v8d: fixedregulator-vcc_1v8d {
+ /* TPS650250 - VDCDC2 */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8d";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_5vd>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
sound {
compatible = "simple-audio-card";
- simple-audio-card,name = "DA850/OMAP-L138 LCDK";
+ simple-audio-card,name = "DA850-OMAPL138 LCDK";
simple-audio-card,widgets =
"Line", "Line In",
"Line", "Line Out";
@@ -221,6 +251,12 @@
compatible = "ti,tlv320aic3106";
reg = <0x18>;
status = "okay";
+
+ /* Regulators */
+ IOVDD-supply = <&vcc_3v3d>;
+ AVDD-supply = <&vcc_3v3d>;
+ DRVDD-supply = <&vcc_3v3d>;
+ DVDD-supply = <&vcc_1v8d>;
};
};
diff --git a/src/arm/kirkwood-dnskw.dtsi b/src/arm/kirkwood-dnskw.dtsi
index cbaf06f..eb91746 100644
--- a/src/arm/kirkwood-dnskw.dtsi
+++ b/src/arm/kirkwood-dnskw.dtsi
@@ -36,8 +36,8 @@
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
pinctrl-names = "default";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW
- &gpio1 13 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0
3000 1
6000 2>;
diff --git a/src/arm64/marvell/armada-8040-mcbin.dtsi b/src/arm64/marvell/armada-8040-mcbin.dtsi
index 29ea7e8..329f8ce 100644
--- a/src/arm64/marvell/armada-8040-mcbin.dtsi
+++ b/src/arm64/marvell/armada-8040-mcbin.dtsi
@@ -183,7 +183,7 @@
pinctrl-0 = <&cp0_pcie_pins>;
num-lanes = <4>;
num-viewport = <8>;
- reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/src/arm64/marvell/armada-ap806.dtsi b/src/arm64/marvell/armada-ap806.dtsi
index 7d94c1f..7f799cb 100644
--- a/src/arm64/marvell/armada-ap806.dtsi
+++ b/src/arm64/marvell/armada-ap806.dtsi
@@ -28,6 +28,23 @@
method = "smc";
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /*
+ * This area matches the mapping done with a
+ * mainline U-Boot, and should be updated by the
+ * bootloader.
+ */
+
+ psci-area@4000000 {
+ reg = <0x0 0x4000000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
ap806 {
#address-cells = <2>;
#size-cells = <2>;
