blob: 046dfc0d45d8ebb21d8a7dd050fdb500dbbf6d35 [file] [log] [blame]
/*
* Copyright 2014 Zoltan HERPAI
* Zoltan HERPAI <wigyori@uid0.hu>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "sun7i-a20.dtsi"
/include/ "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "LinkSprite pcDuino3";
compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
soc@01c00000 {
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 0>; /* PH1 */
cd-inverted;
status = "okay";
};
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};
ehci0: usb@01c14000 {
status = "okay";
};
ohci0: usb@01c14400 {
status = "okay";
};
ahci: sata@01c18000 {
target-supply = <&reg_ahci_5v>;
status = "okay";
};
ehci1: usb@01c1c000 {
status = "okay";
};
ohci1: usb@01c1c400 {
status = "okay";
};
pinctrl@01c20800 {
ahci_pwr_pin_a: ahci_pwr_pin@0 {
allwinner,pins = "PH2";
};
led_pins_pcduino3: led_pins@0 {
allwinner,pins = "PH15", "PH16";
allwinner,function = "gpio_out";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
key_pins_pcduino3: key_pins@0 {
allwinner,pins = "PH17", "PH18", "PH19";
allwinner,function = "gpio_in";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
};
ir0: ir@01c21800 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_pins_a>;
status = "okay";
};
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
i2c0: i2c@01c2ac00 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 8>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
gmac: ethernet@01c50000 {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_pcduino3>;
tx {
label = "pcduino3:green:tx";
gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
};
rx {
label = "pcduino3:green:rx";
gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
};
};
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_pins_pcduino3>;
#address-cells = <1>;
#size-cells = <0>;
button@0 {
label = "Key Back";
linux,code = <KEY_BACK>;
gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
};
button@1 {
label = "Key Home";
linux,code = <KEY_HOME>;
gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "Key Menu";
linux,code = <KEY_MENU>;
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
};
};
reg_usb1_vbus: usb1-vbus {
status = "okay";
};
reg_usb2_vbus: usb2-vbus {
status = "okay";
};
reg_ahci_5v: ahci-5v {
gpio = <&pio 7 2 0>;
status = "okay";
};
};