bcachefs.8

.Dd November 17, 2023
.Dt BCACHEFS 8 SMM
.Os
.Sh NAME
.Nm bcachefs
.Nd manage bcachefs filesystems/devices
.Sh SYNOPSIS
.Nm
.Ar command
.Op Ar options
.Op Ar arguments
.Sh DESCRIPTION
The
.Nm
utility supports the following subcommands,
which are documented in detail below:
.Ss Superblock commands
.Bl -tag -width 18n -compact
.It Ic format
Format one or a list of devices with bcachefs data structures.
.It Ic show-super
Dump superblock information to stdout.
.It Ic set-option
Set a filesystem option
.El
.Ss Mount commands
.Bl -tag -width 18n -compact
.It Ic mount
Mount a filesystem.
.El
.Ss Repair commands
.Bl -tag -width 18n -compact
.It Ic fsck
Check an existing filesystem for errors.
.El
.Ss Commands for managing a running filesystem
.Bl -tag -width 18n -compact
.It Ic fs usage
Show disk usage
.El
.Ss Commands for managing devices within a running filesystem
.Bl -tag -width 22n -compact
.It Ic device add
Add a new device to an existing filesystem
.It Ic device remove
Remove a device from an existing filesystem
.It Ic device online
Re-add an existing member to a filesystem
.It Ic device offline
Take a device offline, without removing it
.It Ic device evacuate
Migrate data off of a specific device
.It Ic device set-state
Mark a device as failed
.It Ic device resize
Resize filesystem on a device
.It Ic device resize-journal
Resize journal on a device
.El
.Ss Commands for managing subvolumes and snapshots
.Bl -tag -width 18n -compact
.It Ic subvolume create
Create a new subvolume
.It Ic subvolume delete
Delete an existing subvolume
.It Ic subvolume snapshot
Create a snapshot
.El
.Ss Commands for managing filesystem data
.Bl -tag -width 18n -compact
.It Ic data rereplicate
Rereplicate degraded data
.It Ic data job
Kick off low level data jobs
.El
.Ss Commands for encryption
.Bl -tag -width 18n -compact
.It Ic unlock
Unlock an encrypted filesystem prior to running/mounting
.It Ic set-passphrase
Change passphrase on an existing (unmounted) filesystem
.It Ic remove-passphrase
Remove passphrase on an existing (unmounted) filesystem
.El
.Ss Commands for migration
.Bl -tag -width 18n -compact
.It Ic migrate
Migrate an existing filesystem to bcachefs, in place
.It Ic migrate-superblock
Add default superblock, after bcachefs migrate
.El
.Ss Commands for operating on files in a bcachefs filesystem
.Bl -tag -width 18n -compact
.It Ic setattr
Set various per file attributes
.El
.Ss Commands for debugging
.Bl -tag -width 18n -compact
.It Ic dump
Dump filesystem metadata to a qcow2 image
.It Ic list
List filesystem metadata in textual form
.It Ic list_journal
List contents of journal
.El
.Ss FUSE commands
.Bl -tag -width 18n -compact
.It Ic fusemount Mount a filesystem via FUSE
.El
.Ss Miscellaneous commands
.Bl -tag -width 18n -compact
.It Ic version
Display the version of the invoked bcachefs tool
.It Ic completions
Generate shell completions
.El
.Sh Superblock commands
.Bl -tag -width Ds
.It Nm Ic format Oo Ar options Oc Ar devices\ ...
Format one or a list of devices with bcachefs data structures.
You need to do this before you create a volume.
.Pp
Device specific options must come before corresponding devices, e.g.
.Dl bcachefs format --label=ssd /dev/sda --label=hdd /dev/sdb
.Bl -tag -width Ds
.It Fl -block_size Ns = Ns Ar size
block size, in bytes (e.g. 4k)
.It Fl -btree_node_size Ns = Ns Ar size
Btree node size, default 256k
.It Fl -errors Ns = Ns ( Cm continue | ro | panic )
Action to take on filesystem error
.It Fl -data_replicas Ns = Ns Ar number
Number of data replicas
.It Fl -metadata_replicas Ns = Ns Ar number
Number of metadata replicas
.It Fl -data_replicas_required Ns = Ns Ar number

.It Fl -metadata_replicas_required Ns = Ns Ar number

.It Fl -encoded_extent_max Ns = Ns Ar size
Maximum size of checksummed/compressed extents
.It Fl -metadata_checksum Ns = Ns ( Cm none | crc32c | crc64 | xxhash )
Set metadata checksum type (default:
.Cm crc32c ) .
.It Fl -data_checksum Ns = Ns ( Cm none | crc32c | crc64 | xxhash )
Set data checksum type (default:
.Cm crc32c ) .
.It Fl -compression Ns = Ns ( Cm none | lz4 | gzip | zstd )
Set compression type (default:
.Cm none ) .
.It Fl -background_compression Ns = Ns ( Cm none | lz4 | gzip | zstd )

.It Fl -str_hash Ns = Ns ( Cm crc32c | crc64 | siphash )
Hash function for directory entries and xattrs
.It Fl -metadata_target Ns = Ns Ar target
Device or label for metadata writes
.It Fl -foreground_target Ns = Ns Ar target
Device or label for foreground writes
.It Fl -background_target Ns = Ns Ar target
Device or label to move data to in the background
.It Fl -promote_target Ns = Ns Ar target
Device or label to promote data to on read
.It Fl -erasure_code
Enable erasure coding (DO NOT USE YET)
.It Fl -inodes_32bit
Constrain inode numbers to 32 bits
.It Fl -shared_inode_numbers
Shared new inode numbers by CPU id
.It Fl -inodes_use_key_cache
Use the btree key cache for the inodes btree
.It Fl -gc_reserve_percent Ns = Ns Ar percentage
Percentage of disk space to reserve for copygc
.It Fl -gc_reserve_bytes Ns = Ns Ar percentage
Amount of disk space to reserve for copygc
.sp
This takes precedence over
.Cm gc_reserve_percent
if set
.It Fl -root_reserve_percent Ns = Ns Ar percentage
Percentage of disk space to reserve for superuser
.It Fl -wide_macs
Store full 128bits of cryptographic MACS, instead of 80
.It Fl -acl
Enable POSIX acls
.It Fl -usrquota
Enable user quotas
.It Fl -grpquota
Enable group quotas
.It Fl prjquota
Enable project quotas
.It Fl -journal_transaction_names
Log transaction function names in journal
.It Fl -nocow
Nocow mode: Writes will be done in place when possible.
.sp
Snapshots and reflink will still caused writes to be COW.
.sp
This flag implicitly disables data checksumming, compression and
encryption.
.It Fl -replicas Ns = Ns Ar number
Sets both data and metadata replicas
.It Fl -encrypted
Enable whole filesystem encryption (chacha20/poly1305);
passphrase will be prompted for.
.It Fl -no_passphrase
Don't encrypt master encryption key
.It Fl L , Fl -fs_label Ns = Ns Ar label
Create the filesystem with the specified
.Ar label
.It Fl U , -uuid Ns = Ns Ar uuid
Create the filesystem with the specified
.Ar uuid
.It Fl -superblock_size Ns = Ns Ar size

.El
.Pp
Device specific options:
.Bl -tag -width Ds
.It Fl -discard
Enable discard/TRIM support
.It Fl -fs_size Ns = Ns Ar size
Create the filesystem using
.Ar size
bytes on the subsequent device.
.It Fl -bucket Ns = Ns Ar size
Specifies the bucket size;
must be greater than the btree node size
.It Fl -durability Ns = Ns Ar n
Data written to this device will be considered
to have already been replicated
.Ar n
times
.It Fl l , Fl -label
Disk label
.It Fl f , Fl -force
Force the filesystem to be created,
even if the device already contains a filesystem.
.It Fl q , Fl -quiet
Only print errors
.It Fl v , Fl -verbose
Verbose filesystem initialization
.El
.It Nm Ic show-super Oo Ar options Oc Ar device
Dump superblock information to stdout.
.Bl -tag -width Ds
.It Fl f , Fl -fields Ns = Ns Ar fields
List of sections to print
.It Fl l , Fl -layout
Print superblock layout
.El
.It Nm Ic set-option Oo Ar options Oc Ar device
.Bl -tag -width Ds
.It Fl -errors Ns = Ns ( Cm continue | ro | panic )
Action to take on filesystem error
.It Fl -metadata_replicas Ns = Ns Ar number
Number of metadata replicas
.It Fl -data_replicas Ns = Ns Ar number
Number of data replicas
.It Fl -metadata_replicas_required Ns = Ns Ar number

.It Fl -data_replicas_required Ns = Ns Ar number

.It Fl -metadata_checksum Ns = Ns ( Cm none | crc32c | crc64 | xxhash )
Set metadata checksum type (default:
.Cm crc32c ) .
.It Fl -data_checksum Ns = Ns ( Cm none | crc32c | crc64 | xxhash )
Set data checksum type (default:
.Cm crc32c ) .
.It Fl -compression Ns = Ns ( Cm none | lz4 | gzip | zstd )
Set compression type (default:
.Cm none ) .
.It Fl -background_compression Ns = Ns ( Cm none | lz4 | gzip | zstd )

.It Fl -str_hash Ns = Ns ( Cm crc32c | crc64 | siphash )
Hash function for directory entries and xattrs
.It Fl -metadata_target Ns = Ns Ar target
Device or label for metadata writes
.It Fl -foreground_target Ns = Ns Ar target
Device or label for foreground writes
.It Fl -background_target Ns = Ns Ar target
Device or label to move data to in the background
.It Fl -promote_target Ns = Ns Ar target
Device or label to promote data to on read
.It Fl -erasure_code
Enable erasure coding (DO NOT USE YET)
.It Fl -inodes_32bit
Constrain inode numbers to 32 bits
.It Fl -shared_inode_numbers
Shared new inode numbers by CPU id
.It Fl -inodes_use_key_cache
Use the btree key cache for the inodes btree
.It Fl -gc_reserve_percent Ns = Ns Ar percentage
Percentage of disk space to reserve for copygc
.It Fl -gc_reserve_bytes Ns = Ns Ar percentage
Amount of disk space to reserve for copygc
.sp
This takes precedence over
.Cm gc_reserve_percent
if set
.It Fl -root_reserve_percent Ns = Ns Ar percentage
Percentage of disk space to reserve for superuser
.It Fl -wide_macs
Store full 128bits of cryptographic MACS, instead of 80
.It Fl -acl
Enable POSIX acls
.It Fl -usrquota
Enable user quotas
.It Fl -grpquota
Enable group quotas
.It Fl -prjquota
Enable project quotas
.It Fl -degraded
Allow mounting in degraded mode
.It Fl -very_degraded
Allow mounting in when data will be missing
.It Fl -discard
Enable discard/TRIM support
.It Fl -verbose
Extra debugging information during mount/recovery
.It Fl -journal_flush_delay Ns = Ns Ar ms
Delay in milliseconds before automatic journal commits
.It Fl -journal_flush_disabled
Disable journal flush on sync/fsync
.sp
If enabled, writes can be lost, but only since the
last journal write (default 1 second)
.It Fl -journal_reclaim_delay Ns = Ns Ar ms
Delay in milliseconds before automatic journal reclaim
.It Fl -move_bytes_in_flight Ns = Ns Ar bytes
Maximum Amount of IO to keep in flight by the move path
.It Fl -move_ios_in_flight Ns = Ns Ar number
Maximum number of IOs to keep in flight by the move path
.It Fl -fsck
Run fsck on mount
.It Fl -fix_errors Ns = Ns Ar error
Fix errors during fsck without asking
.It Fl -ratelimit_errors
Ratelimit error messages during fsck
.It Fl -nochanges
Super read only mode - no writes at all will be issued,
even if we have to replay the journal
.It Fl -norecovery
Don't replay the journal
.It Fl -journal_transaction_names
Log transaction function names in journal
.It Fl -noexcl
Don't open device in exclusive mode
.It Fl -direct_io
Use O_DIRECT (userspace only)
.It Fl -sb Ns = Ns Ar offset
Sector offset of superblock
.It Fl -reconstruct_alloc
Reconstruct alloc btree
.It Fl -version_upgrade Ns = Ns ( Cm compatible | incompatible | none )
Set superblock to latest version, allowing any new features
to be used
.It Fl -nocow
Nocow mode: Writes will be done in place when possible.
.sp
Snapshots and reflink will still caused writes to be COW.
.sp
This flag implicitly disables data checksumming, compression and
encryption.
.It Fl -nocow_enabled
Enable nocow mode: enables runtime locking in data
move path needed if nocow will ever be in use
.It Fl -no_data_io
Skip submit_bio() for data reads and writes,
for performance testing purposes
.El
.El
.Sh Mount commands
.Bl -tag -width Ds
.It Nm Ic mount Oo Ar options Oc Ar device mountpoint
Mount a filesystem. The
.Ar device
can be a device, a colon-separated list of devices, or UUID=<UUID>. The
.Ar mountpoint
is the path where the filesystem should be mounted. If not set, then the filesystem won't actually be mounted
but all steps preceding mounting the filesystem (e.g. asking for passphrase) will still be performed.
.Pp the options are as follows:
.Bl -tag -width Ds
.It Fl o Ar options
Mount options provided as a comma-separated list. See user guide for complete list.
.Bl -tag -width Ds -compact
.It Cm degraded
Allow mounting with data degraded
.It Cm verbose
Extra debugging info during mount/recovery
.It Cm fsck
Run fsck during mount
.It Cm fix_errors
Fix errors without asking during fsck
.It Cm read_only
Mount in read only mode
.It Cm version_upgrade
.El
.It Fl k , Fl -key-location Ns = Ns ( Cm fail | wait | ask )
Where the password would be loaded from. (default:
.Cm ask ) .
.Bl -tag -width Ds -compact
.It Cm fail
don't ask for password, fail if filesystem is encrypted.
.It Cm wait
wait for password to become available before mounting.
.It Cm ask
prompt the user for password.
.El
.It Fl c , Fl -colorize Ns = Ns ( Cm true | false )
Force color on/off. Default: auto-detect TTY
.It Fl v
Be verbose. Can be specified more than once.
.El
.El
.Sh Repair commands
.Bl -tag -width Ds
.It Nm Ic fsck Oo Ar options Oc Ar devices\ ...
Check an existing filesystem for errors.
.Bl -tag -width Ds
.It Fl p
Automatic repair (no questions)
.It Fl n
Don't repair, only check for errors
.It Fl y
Assume "yes" to all questions
.It Fl f
Force checking even if filesystem is marked clean
.It Fl r , Fl -ratelimit_errors
Don't display more than 10 errors of a given type
.It Fl R , Fl -reconstruct_alloc
Reconstruct the alloc btree
.It Fl v
Be verbose
.El
.El
.Sh Commands for managing a running filesystem
.Bl -tag -width Ds
.It Nm Ic fs Ic usage Oo Ar options Oc Op Ar filesystem
Show disk usage.
.Bl -tag -width Ds
.It Fl h , Fl -human-readable
Print human readable sizes.
.El
.El
.Sh Commands for managing devices within a running filesystem
.Bl -tag -width Ds
.It Nm Ic device Ic add Oo Ar options Oc Ar device
Add a device to an existing filesystem.
.Bl -tag -width Ds
.It Fl -fs_size Ns = Ns Ar size
Size of filesystem on device
.It Fl -bucket Ns = Ns Ar size
Set bucket size
.It Fl -discard
Enable discards
.It Fl l , Fl -label Ns = Ns Ar label
Disk label
.It Fl f , Fl -force
Use device even if it appears to already be formatted
.El
.It Nm Ic device Ic remove Oo Ar options Oc Ar device
Remove a device from a filesystem
.Bl -tag -width Ds
.It Fl f , Fl -force
Force removal, even if some data couldn't be migrated
.It Fl F , Fl -force-metadata
Force removal, even if some metadata couldn't be migrated
.El
.It Nm Ic device Ic online Ar device
Re-add a device to a running filesystem
.It Nm Ic device Ic offline Ar device
Take a device offline, without removing it
.Bl -tag -width Ds
.It Fl f , Fl -force
Force, if data redundancy will be degraded
.El
.It Nm Ic device Ic evacuate Ar device
Move data off of a given device
.It Nm Ic device Ic set-state Oo Ar options Oc Ar new-state Ar device
.Bl -tag -width Ds
.It Ar  new-state Ns = Ns ( Ar rw | ro | failed | spare )
.It Fl f , Fl -force
Force, if data redundancy will be degraded
.It Fl -force-if-data-lost
Force, if data will be lost
.It Fl o , Fl -offline
Set state of an offline device
.El
.It Nm Ic device Ic resize Ar device Op Ar size
Resize filesystem on a device
.It Nm Ic device Ic resize-journal Ar device Op Ar size
Resize journal on a device
.El
.Sh Commands for managing subvolumes and snapshots
.Bl -tag -width Ds
.It Ic subvolume create Oo Ar options Oc Ar path
Create a new subvolume
.It Ic subvolume delete Oo Ar options Oc Ar path
Delete an existing subvolume
.It Ic subvolume delete Oo Ar options Oc Ar source dest
Create a snapshot of
.Ar source
at
.Ar dest .
If specified,
.Ar source
must be a subvolume;
if not specified the snapshot will be of the subvolume containing
.Ar dest .
.Bl -tag -width Ds
.It Fl r
Make snapshot read-only
.El
.El
.Sh Commands for managing filesystem data
.Bl -tag -width Ds
.It Nm Ic data Ic rereplicate Ar filesystem
Walks existing data in a filesystem,
writing additional copies of any degraded data.
.It Nm Ic data Ic job Ar job filesystem
Kick off a data job and report progress
.sp
.Ar job
is one of (
.Cm scrub | rereplicate | migrate | rewrite_old_nodes
)
.Bl -tag -width Ds
.It Fl b Ar btree
Btree to operate on
.It Fl s Ar inode Ns Cm \&: Ns Ar offset
Start position
.It Fl e Ar inode Ns Cm \&: Ns Ar offset
End position
.El
.El
.Sh Commands for encryption
.Bl -tag -width Ds
.It Nm Ic unlock Ar device
Unlock an encrypted filesystem prior to running/mounting.
.Bl -tag -width Ds
.It Fl c
Check if a device is encrypted
.It Fl k Ns = Ns ( Cm session | user | user_session )
Keyring to add to (default:
.Cm user )
.El
.It Nm Ic set-passphrase Ar devices\ ...
Change passphrase on an existing (unmounted) filesystem.
.It Nm Ic remove-passphrase Ar devices\ ...
Remove passphrase on an existing (unmounted) filesystem.
.El
.Sh Commands for migration
.Bl -tag -width Ds
.It Nm Ic migrate Oo Ar options Oc Ar device
Migrate an existing filesystem to bcachefs
.Bl -tag -width Ds
.It Fl f Ar fs
Root of filesystem to migrate
.It Fl -encrypted
Enable whole filesystem encryption (chacha20/poly1305)
.It Fl -no_passphrase
Don't encrypt master encryption key
.It Fl F
Force, even if metadata file already exists
.El
.It Nm Ic migrate-superblock Oo Ar options Oc Ar device
Create default superblock after migrating
.Bl -tag -width Ds
.It Fl d Ar device
Device to create superblock for
.It Fl o Ar offset
Offset of existing superblock
.El
.El
.Sh Commands for operating on files in a bcachefs filesystem
.Bl -tag -width Ds
.It Nm Ic setattr Oo Ar options Oc Ar devices\ ...
.Bl -tag -width Ds
.It Fl -data_replicas Ns = Ns Ar number
Number of data replicas
.It Fl -data_checksum Ns = Ns ( Cm none | crc32c | crc64 | xxhash )
Set data checksum type (default:
.Cm crc32c ) .
.It Fl -compression Ns = Ns ( Cm none | lz4 | gzip | zstd )
Set compression type (default:
.Cm none ) .
.It Fl -background_compression Ns = Ns ( Cm none | lz4 | gzip | zstd )

.It Fl -metadata_target Ns = Ns Ar target
Device or label for metadata writes
.It Fl -foreground_target Ns = Ns Ar target
Device or label for foreground writes
.It Fl -background_target Ns = Ns Ar target
Device or label to move data to in the background
.It Fl -promote_target Ns = Ns Ar target
Device or label to promote data to on read
.It Fl -erasure_code
Enable erasure coding (DO NOT USE YET)
.It Fl -project

.It Fl -nocow
Nocow mode: Writes will be done in place when possible.
.El
.El
.Sh Commands for debugging
These commands work on offline, unmounted filesystems.
.Bl -tag -width Ds
.It Nm Ic dump Oo Ar options Oc Ar device
Dump filesystem metadata
.Bl -tag -width Ds
.It Fl o Ar output
Required flag: Output qcow2 image(s)
.It Fl f , Fl -force
Force; overwrite when needed
.It Fl -nojournal
Don't dump entire journal, just dirty entries
.El
.It Nm Ic list Oo Ar options Oc Ar devices\ ...
List filesystem metadata to stdout
.Bl -tag -width Ds
.It Fl b ( Cm extents | inodes | dirents | xattrs )
Btree to list from. (default:
.Cm extents)
.It Fl l , Fl -level
Btree depth to descend to. (
.Cm 0
== leaves; default:
.Cm 0)
.It Fl s Ar inode Ns Cm \&: Ns Ar offset
Start position to list from
.It Fl e Ar inode Ns Cm \&: Ns Ar offset
End position
.It Fl m , Fl -mode ( Cm keys | formats | nodes | nodes-ondisk )
(default:
.Cm keys)
.It Fl f
Check (fsck) the filesystem first
.It Fl c , Fl -colorize Ns = Ns ( Cm true | false )
Force color on/off. Default: auto-detect TTY
.It Fl v
Verbose mode
.El
.It Nm Ic list_journal Oo Ar options Oc Ar devices\ ...
.Bl -tag -width Ds
.It Fl a
Read entire journal, not just dirty entries
.It Fl n , Fl -nr-entries Ns = Ns Ar nr
Number of journal entries to print, starting from the most recent
.It Fl t , Fl -transaction-filter Ns = Ns Ar bbpos
Filter transactions not updating
.Ar bbpos
.It Fl k , Fl -key-filter Ns = Ns Ar btree
Filter keys not updating
.Ar btree
.It Fl v , Fl -verbose
Verbose mode
.El
.El
.Sh FUSE commands
.Bl -tag -width Ds
.It Nm Ic fusemount
Mount a filesystem via FUSE
.El
.Sh Miscellaneous commands
.Bl -tag -width Ds
.It Nm Ic completions Ar shell
Generate shell completions
.It Nm Ic version
Display the version of the invoked bcachefs tool
.El
.Sh EXIT STATUS
.Ex -std