|  | /* | 
|  | * drivers/pci/pci-driver.c | 
|  | * | 
|  | * (C) Copyright 2002-2004, 2007 Greg Kroah-Hartman <greg@kroah.com> | 
|  | * (C) Copyright 2007 Novell Inc. | 
|  | * | 
|  | * Released under the GPL v2 only. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/pci.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/mempolicy.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/cpu.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include "pci.h" | 
|  |  | 
|  | struct pci_dynid { | 
|  | struct list_head node; | 
|  | struct pci_device_id id; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * pci_add_dynid - add a new PCI device ID to this driver and re-probe devices | 
|  | * @drv: target pci driver | 
|  | * @vendor: PCI vendor ID | 
|  | * @device: PCI device ID | 
|  | * @subvendor: PCI subvendor ID | 
|  | * @subdevice: PCI subdevice ID | 
|  | * @class: PCI class | 
|  | * @class_mask: PCI class mask | 
|  | * @driver_data: private driver data | 
|  | * | 
|  | * Adds a new dynamic pci device ID to this driver and causes the | 
|  | * driver to probe for all devices again.  @drv must have been | 
|  | * registered prior to calling this function. | 
|  | * | 
|  | * CONTEXT: | 
|  | * Does GFP_KERNEL allocation. | 
|  | * | 
|  | * RETURNS: | 
|  | * 0 on success, -errno on failure. | 
|  | */ | 
|  | int pci_add_dynid(struct pci_driver *drv, | 
|  | unsigned int vendor, unsigned int device, | 
|  | unsigned int subvendor, unsigned int subdevice, | 
|  | unsigned int class, unsigned int class_mask, | 
|  | unsigned long driver_data) | 
|  | { | 
|  | struct pci_dynid *dynid; | 
|  | int retval; | 
|  |  | 
|  | dynid = kzalloc(sizeof(*dynid), GFP_KERNEL); | 
|  | if (!dynid) | 
|  | return -ENOMEM; | 
|  |  | 
|  | dynid->id.vendor = vendor; | 
|  | dynid->id.device = device; | 
|  | dynid->id.subvendor = subvendor; | 
|  | dynid->id.subdevice = subdevice; | 
|  | dynid->id.class = class; | 
|  | dynid->id.class_mask = class_mask; | 
|  | dynid->id.driver_data = driver_data; | 
|  |  | 
|  | spin_lock(&drv->dynids.lock); | 
|  | list_add_tail(&dynid->node, &drv->dynids.list); | 
|  | spin_unlock(&drv->dynids.lock); | 
|  |  | 
|  | get_driver(&drv->driver); | 
|  | retval = driver_attach(&drv->driver); | 
|  | put_driver(&drv->driver); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void pci_free_dynids(struct pci_driver *drv) | 
|  | { | 
|  | struct pci_dynid *dynid, *n; | 
|  |  | 
|  | spin_lock(&drv->dynids.lock); | 
|  | list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) { | 
|  | list_del(&dynid->node); | 
|  | kfree(dynid); | 
|  | } | 
|  | spin_unlock(&drv->dynids.lock); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Dynamic device ID manipulation via sysfs is disabled for !CONFIG_HOTPLUG | 
|  | */ | 
|  | #ifdef CONFIG_HOTPLUG | 
|  | /** | 
|  | * store_new_id - sysfs frontend to pci_add_dynid() | 
|  | * @driver: target device driver | 
|  | * @buf: buffer for scanning device ID data | 
|  | * @count: input size | 
|  | * | 
|  | * Allow PCI IDs to be added to an existing driver via sysfs. | 
|  | */ | 
|  | static ssize_t | 
|  | store_new_id(struct device_driver *driver, const char *buf, size_t count) | 
|  | { | 
|  | struct pci_driver *pdrv = to_pci_driver(driver); | 
|  | const struct pci_device_id *ids = pdrv->id_table; | 
|  | __u32 vendor, device, subvendor=PCI_ANY_ID, | 
|  | subdevice=PCI_ANY_ID, class=0, class_mask=0; | 
|  | unsigned long driver_data=0; | 
|  | int fields=0; | 
|  | int retval; | 
|  |  | 
|  | fields = sscanf(buf, "%x %x %x %x %x %x %lx", | 
|  | &vendor, &device, &subvendor, &subdevice, | 
|  | &class, &class_mask, &driver_data); | 
|  | if (fields < 2) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Only accept driver_data values that match an existing id_table | 
|  | entry */ | 
|  | if (ids) { | 
|  | retval = -EINVAL; | 
|  | while (ids->vendor || ids->subvendor || ids->class_mask) { | 
|  | if (driver_data == ids->driver_data) { | 
|  | retval = 0; | 
|  | break; | 
|  | } | 
|  | ids++; | 
|  | } | 
|  | if (retval)	/* No match */ | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | retval = pci_add_dynid(pdrv, vendor, device, subvendor, subdevice, | 
|  | class, class_mask, driver_data); | 
|  | if (retval) | 
|  | return retval; | 
|  | return count; | 
|  | } | 
|  | static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id); | 
|  |  | 
|  | /** | 
|  | * store_remove_id - remove a PCI device ID from this driver | 
|  | * @driver: target device driver | 
|  | * @buf: buffer for scanning device ID data | 
|  | * @count: input size | 
|  | * | 
|  | * Removes a dynamic pci device ID to this driver. | 
|  | */ | 
|  | static ssize_t | 
|  | store_remove_id(struct device_driver *driver, const char *buf, size_t count) | 
|  | { | 
|  | struct pci_dynid *dynid, *n; | 
|  | struct pci_driver *pdrv = to_pci_driver(driver); | 
|  | __u32 vendor, device, subvendor = PCI_ANY_ID, | 
|  | subdevice = PCI_ANY_ID, class = 0, class_mask = 0; | 
|  | int fields = 0; | 
|  | int retval = -ENODEV; | 
|  |  | 
|  | fields = sscanf(buf, "%x %x %x %x %x %x", | 
|  | &vendor, &device, &subvendor, &subdevice, | 
|  | &class, &class_mask); | 
|  | if (fields < 2) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock(&pdrv->dynids.lock); | 
|  | list_for_each_entry_safe(dynid, n, &pdrv->dynids.list, node) { | 
|  | struct pci_device_id *id = &dynid->id; | 
|  | if ((id->vendor == vendor) && | 
|  | (id->device == device) && | 
|  | (subvendor == PCI_ANY_ID || id->subvendor == subvendor) && | 
|  | (subdevice == PCI_ANY_ID || id->subdevice == subdevice) && | 
|  | !((id->class ^ class) & class_mask)) { | 
|  | list_del(&dynid->node); | 
|  | kfree(dynid); | 
|  | retval = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock(&pdrv->dynids.lock); | 
|  |  | 
|  | if (retval) | 
|  | return retval; | 
|  | return count; | 
|  | } | 
|  | static DRIVER_ATTR(remove_id, S_IWUSR, NULL, store_remove_id); | 
|  |  | 
|  | static int | 
|  | pci_create_newid_file(struct pci_driver *drv) | 
|  | { | 
|  | int error = 0; | 
|  | if (drv->probe != NULL) | 
|  | error = driver_create_file(&drv->driver, &driver_attr_new_id); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static void pci_remove_newid_file(struct pci_driver *drv) | 
|  | { | 
|  | driver_remove_file(&drv->driver, &driver_attr_new_id); | 
|  | } | 
|  |  | 
|  | static int | 
|  | pci_create_removeid_file(struct pci_driver *drv) | 
|  | { | 
|  | int error = 0; | 
|  | if (drv->probe != NULL) | 
|  | error = driver_create_file(&drv->driver,&driver_attr_remove_id); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static void pci_remove_removeid_file(struct pci_driver *drv) | 
|  | { | 
|  | driver_remove_file(&drv->driver, &driver_attr_remove_id); | 
|  | } | 
|  | #else /* !CONFIG_HOTPLUG */ | 
|  | static inline int pci_create_newid_file(struct pci_driver *drv) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  | static inline void pci_remove_newid_file(struct pci_driver *drv) {} | 
|  | static inline int pci_create_removeid_file(struct pci_driver *drv) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  | static inline void pci_remove_removeid_file(struct pci_driver *drv) {} | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * pci_match_id - See if a pci device matches a given pci_id table | 
|  | * @ids: array of PCI device id structures to search in | 
|  | * @dev: the PCI device structure to match against. | 
|  | * | 
|  | * Used by a driver to check whether a PCI device present in the | 
|  | * system is in its list of supported devices.  Returns the matching | 
|  | * pci_device_id structure or %NULL if there is no match. | 
|  | * | 
|  | * Deprecated, don't use this as it will not catch any dynamic ids | 
|  | * that a driver might want to check for. | 
|  | */ | 
|  | const struct pci_device_id *pci_match_id(const struct pci_device_id *ids, | 
|  | struct pci_dev *dev) | 
|  | { | 
|  | if (ids) { | 
|  | while (ids->vendor || ids->subvendor || ids->class_mask) { | 
|  | if (pci_match_one_device(ids, dev)) | 
|  | return ids; | 
|  | ids++; | 
|  | } | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_match_device - Tell if a PCI device structure has a matching PCI device id structure | 
|  | * @drv: the PCI driver to match against | 
|  | * @dev: the PCI device structure to match against | 
|  | * | 
|  | * Used by a driver to check whether a PCI device present in the | 
|  | * system is in its list of supported devices.  Returns the matching | 
|  | * pci_device_id structure or %NULL if there is no match. | 
|  | */ | 
|  | static const struct pci_device_id *pci_match_device(struct pci_driver *drv, | 
|  | struct pci_dev *dev) | 
|  | { | 
|  | struct pci_dynid *dynid; | 
|  |  | 
|  | /* Look at the dynamic ids first, before the static ones */ | 
|  | spin_lock(&drv->dynids.lock); | 
|  | list_for_each_entry(dynid, &drv->dynids.list, node) { | 
|  | if (pci_match_one_device(&dynid->id, dev)) { | 
|  | spin_unlock(&drv->dynids.lock); | 
|  | return &dynid->id; | 
|  | } | 
|  | } | 
|  | spin_unlock(&drv->dynids.lock); | 
|  |  | 
|  | return pci_match_id(drv->id_table, dev); | 
|  | } | 
|  |  | 
|  | struct drv_dev_and_id { | 
|  | struct pci_driver *drv; | 
|  | struct pci_dev *dev; | 
|  | const struct pci_device_id *id; | 
|  | }; | 
|  |  | 
|  | static long local_pci_probe(void *_ddi) | 
|  | { | 
|  | struct drv_dev_and_id *ddi = _ddi; | 
|  | struct device *dev = &ddi->dev->dev; | 
|  | int rc; | 
|  |  | 
|  | /* Unbound PCI devices are always set to disabled and suspended. | 
|  | * During probe, the device is set to enabled and active and the | 
|  | * usage count is incremented.  If the driver supports runtime PM, | 
|  | * it should call pm_runtime_put_noidle() in its probe routine and | 
|  | * pm_runtime_get_noresume() in its remove routine. | 
|  | */ | 
|  | pm_runtime_get_noresume(dev); | 
|  | pm_runtime_set_active(dev); | 
|  | pm_runtime_enable(dev); | 
|  |  | 
|  | rc = ddi->drv->probe(ddi->dev, ddi->id); | 
|  | if (rc) { | 
|  | pm_runtime_disable(dev); | 
|  | pm_runtime_set_suspended(dev); | 
|  | pm_runtime_put_noidle(dev); | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, | 
|  | const struct pci_device_id *id) | 
|  | { | 
|  | int error, node; | 
|  | struct drv_dev_and_id ddi = { drv, dev, id }; | 
|  |  | 
|  | /* Execute driver initialization on node where the device's | 
|  | bus is attached to.  This way the driver likely allocates | 
|  | its local memory on the right node without any need to | 
|  | change it. */ | 
|  | node = dev_to_node(&dev->dev); | 
|  | if (node >= 0) { | 
|  | int cpu; | 
|  |  | 
|  | get_online_cpus(); | 
|  | cpu = cpumask_any_and(cpumask_of_node(node), cpu_online_mask); | 
|  | if (cpu < nr_cpu_ids) | 
|  | error = work_on_cpu(cpu, local_pci_probe, &ddi); | 
|  | else | 
|  | error = local_pci_probe(&ddi); | 
|  | put_online_cpus(); | 
|  | } else | 
|  | error = local_pci_probe(&ddi); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * __pci_device_probe - check if a driver wants to claim a specific PCI device | 
|  | * @drv: driver to call to check if it wants the PCI device | 
|  | * @pci_dev: PCI device being probed | 
|  | * | 
|  | * returns 0 on success, else error. | 
|  | * side-effect: pci_dev->driver is set to drv when drv claims pci_dev. | 
|  | */ | 
|  | static int | 
|  | __pci_device_probe(struct pci_driver *drv, struct pci_dev *pci_dev) | 
|  | { | 
|  | const struct pci_device_id *id; | 
|  | int error = 0; | 
|  |  | 
|  | if (!pci_dev->driver && drv->probe) { | 
|  | error = -ENODEV; | 
|  |  | 
|  | id = pci_match_device(drv, pci_dev); | 
|  | if (id) | 
|  | error = pci_call_probe(drv, pci_dev, id); | 
|  | if (error >= 0) { | 
|  | pci_dev->driver = drv; | 
|  | error = 0; | 
|  | } | 
|  | } | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int pci_device_probe(struct device * dev) | 
|  | { | 
|  | int error = 0; | 
|  | struct pci_driver *drv; | 
|  | struct pci_dev *pci_dev; | 
|  |  | 
|  | drv = to_pci_driver(dev->driver); | 
|  | pci_dev = to_pci_dev(dev); | 
|  | pci_dev_get(pci_dev); | 
|  | error = __pci_device_probe(drv, pci_dev); | 
|  | if (error) | 
|  | pci_dev_put(pci_dev); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int pci_device_remove(struct device * dev) | 
|  | { | 
|  | struct pci_dev * pci_dev = to_pci_dev(dev); | 
|  | struct pci_driver * drv = pci_dev->driver; | 
|  |  | 
|  | if (drv) { | 
|  | if (drv->remove) { | 
|  | pm_runtime_get_sync(dev); | 
|  | drv->remove(pci_dev); | 
|  | pm_runtime_put_noidle(dev); | 
|  | } | 
|  | pci_dev->driver = NULL; | 
|  | } | 
|  |  | 
|  | /* Undo the runtime PM settings in local_pci_probe() */ | 
|  | pm_runtime_disable(dev); | 
|  | pm_runtime_set_suspended(dev); | 
|  | pm_runtime_put_noidle(dev); | 
|  |  | 
|  | /* | 
|  | * If the device is still on, set the power state as "unknown", | 
|  | * since it might change by the next time we load the driver. | 
|  | */ | 
|  | if (pci_dev->current_state == PCI_D0) | 
|  | pci_dev->current_state = PCI_UNKNOWN; | 
|  |  | 
|  | /* | 
|  | * We would love to complain here if pci_dev->is_enabled is set, that | 
|  | * the driver should have called pci_disable_device(), but the | 
|  | * unfortunate fact is there are too many odd BIOS and bridge setups | 
|  | * that don't like drivers doing that all of the time. | 
|  | * Oh well, we can dream of sane hardware when we sleep, no matter how | 
|  | * horrible the crap we have to deal with is when we are awake... | 
|  | */ | 
|  |  | 
|  | pci_dev_put(pci_dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void pci_device_shutdown(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | struct pci_driver *drv = pci_dev->driver; | 
|  |  | 
|  | if (drv && drv->shutdown) | 
|  | drv->shutdown(pci_dev); | 
|  | pci_msi_shutdown(pci_dev); | 
|  | pci_msix_shutdown(pci_dev); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  |  | 
|  | /* Auxiliary functions used for system resume and run-time resume. */ | 
|  |  | 
|  | /** | 
|  | * pci_restore_standard_config - restore standard config registers of PCI device | 
|  | * @pci_dev: PCI device to handle | 
|  | */ | 
|  | static int pci_restore_standard_config(struct pci_dev *pci_dev) | 
|  | { | 
|  | pci_update_current_state(pci_dev, PCI_UNKNOWN); | 
|  |  | 
|  | if (pci_dev->current_state != PCI_D0) { | 
|  | int error = pci_set_power_state(pci_dev, PCI_D0); | 
|  | if (error) | 
|  | return error; | 
|  | } | 
|  |  | 
|  | pci_restore_state(pci_dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void pci_pm_default_resume_early(struct pci_dev *pci_dev) | 
|  | { | 
|  | pci_restore_standard_config(pci_dev); | 
|  | pci_fixup_device(pci_fixup_resume_early, pci_dev); | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  |  | 
|  | /* | 
|  | * Default "suspend" method for devices that have no driver provided suspend, | 
|  | * or not even a driver at all (second part). | 
|  | */ | 
|  | static void pci_pm_set_unknown_state(struct pci_dev *pci_dev) | 
|  | { | 
|  | /* | 
|  | * mark its power state as "unknown", since we don't know if | 
|  | * e.g. the BIOS will change its device state when we suspend. | 
|  | */ | 
|  | if (pci_dev->current_state == PCI_D0) | 
|  | pci_dev->current_state = PCI_UNKNOWN; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Default "resume" method for devices that have no driver provided resume, | 
|  | * or not even a driver at all (second part). | 
|  | */ | 
|  | static int pci_pm_reenable_device(struct pci_dev *pci_dev) | 
|  | { | 
|  | int retval; | 
|  |  | 
|  | /* if the device was enabled before suspend, reenable */ | 
|  | retval = pci_reenable_device(pci_dev); | 
|  | /* | 
|  | * if the device was busmaster before the suspend, make it busmaster | 
|  | * again | 
|  | */ | 
|  | if (pci_dev->is_busmaster) | 
|  | pci_set_master(pci_dev); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static int pci_legacy_suspend(struct device *dev, pm_message_t state) | 
|  | { | 
|  | struct pci_dev * pci_dev = to_pci_dev(dev); | 
|  | struct pci_driver * drv = pci_dev->driver; | 
|  |  | 
|  | if (drv && drv->suspend) { | 
|  | pci_power_t prev = pci_dev->current_state; | 
|  | int error; | 
|  |  | 
|  | error = drv->suspend(pci_dev, state); | 
|  | suspend_report_result(drv->suspend, error); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0 | 
|  | && pci_dev->current_state != PCI_UNKNOWN) { | 
|  | WARN_ONCE(pci_dev->current_state != prev, | 
|  | "PCI PM: Device state not saved by %pF\n", | 
|  | drv->suspend); | 
|  | } | 
|  | } | 
|  |  | 
|  | pci_fixup_device(pci_fixup_suspend, pci_dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pci_legacy_suspend_late(struct device *dev, pm_message_t state) | 
|  | { | 
|  | struct pci_dev * pci_dev = to_pci_dev(dev); | 
|  | struct pci_driver * drv = pci_dev->driver; | 
|  |  | 
|  | if (drv && drv->suspend_late) { | 
|  | pci_power_t prev = pci_dev->current_state; | 
|  | int error; | 
|  |  | 
|  | error = drv->suspend_late(pci_dev, state); | 
|  | suspend_report_result(drv->suspend_late, error); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0 | 
|  | && pci_dev->current_state != PCI_UNKNOWN) { | 
|  | WARN_ONCE(pci_dev->current_state != prev, | 
|  | "PCI PM: Device state not saved by %pF\n", | 
|  | drv->suspend_late); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!pci_dev->state_saved) | 
|  | pci_save_state(pci_dev); | 
|  |  | 
|  | pci_pm_set_unknown_state(pci_dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pci_legacy_resume_early(struct device *dev) | 
|  | { | 
|  | struct pci_dev * pci_dev = to_pci_dev(dev); | 
|  | struct pci_driver * drv = pci_dev->driver; | 
|  |  | 
|  | return drv && drv->resume_early ? | 
|  | drv->resume_early(pci_dev) : 0; | 
|  | } | 
|  |  | 
|  | static int pci_legacy_resume(struct device *dev) | 
|  | { | 
|  | struct pci_dev * pci_dev = to_pci_dev(dev); | 
|  | struct pci_driver * drv = pci_dev->driver; | 
|  |  | 
|  | pci_fixup_device(pci_fixup_resume, pci_dev); | 
|  |  | 
|  | return drv && drv->resume ? | 
|  | drv->resume(pci_dev) : pci_pm_reenable_device(pci_dev); | 
|  | } | 
|  |  | 
|  | /* Auxiliary functions used by the new power management framework */ | 
|  |  | 
|  | static void pci_pm_default_resume(struct pci_dev *pci_dev) | 
|  | { | 
|  | pci_fixup_device(pci_fixup_resume, pci_dev); | 
|  |  | 
|  | if (!pci_is_bridge(pci_dev)) | 
|  | pci_enable_wake(pci_dev, PCI_D0, false); | 
|  | } | 
|  |  | 
|  | static void pci_pm_default_suspend(struct pci_dev *pci_dev) | 
|  | { | 
|  | /* Disable non-bridge devices without PM support */ | 
|  | if (!pci_is_bridge(pci_dev)) | 
|  | pci_disable_enabled_device(pci_dev); | 
|  | } | 
|  |  | 
|  | static bool pci_has_legacy_pm_support(struct pci_dev *pci_dev) | 
|  | { | 
|  | struct pci_driver *drv = pci_dev->driver; | 
|  | bool ret = drv && (drv->suspend || drv->suspend_late || drv->resume | 
|  | || drv->resume_early); | 
|  |  | 
|  | /* | 
|  | * Legacy PM support is used by default, so warn if the new framework is | 
|  | * supported as well.  Drivers are supposed to support either the | 
|  | * former, or the latter, but not both at the same time. | 
|  | */ | 
|  | WARN_ON(ret && drv->driver.pm); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* New power management framework */ | 
|  |  | 
|  | static int pci_pm_prepare(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int error = 0; | 
|  |  | 
|  | /* | 
|  | * PCI devices suspended at run time need to be resumed at this | 
|  | * point, because in general it is necessary to reconfigure them for | 
|  | * system suspend.  Namely, if the device is supposed to wake up the | 
|  | * system from the sleep state, we may need to reconfigure it for this | 
|  | * purpose.  In turn, if the device is not supposed to wake up the | 
|  | * system from the sleep state, we'll have to prevent it from signaling | 
|  | * wake-up. | 
|  | */ | 
|  | pm_runtime_get_sync(dev); | 
|  |  | 
|  | if (drv && drv->pm && drv->pm->prepare) | 
|  | error = drv->pm->prepare(dev); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static void pci_pm_complete(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  |  | 
|  | if (drv && drv->pm && drv->pm->complete) | 
|  | drv->pm->complete(dev); | 
|  |  | 
|  | pm_runtime_put_sync(dev); | 
|  | } | 
|  |  | 
|  | #else /* !CONFIG_PM_SLEEP */ | 
|  |  | 
|  | #define pci_pm_prepare	NULL | 
|  | #define pci_pm_complete	NULL | 
|  |  | 
|  | #endif /* !CONFIG_PM_SLEEP */ | 
|  |  | 
|  | #ifdef CONFIG_SUSPEND | 
|  |  | 
|  | static int pci_pm_suspend(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | 
|  |  | 
|  | if (pci_has_legacy_pm_support(pci_dev)) | 
|  | return pci_legacy_suspend(dev, PMSG_SUSPEND); | 
|  |  | 
|  | if (!pm) { | 
|  | pci_pm_default_suspend(pci_dev); | 
|  | goto Fixup; | 
|  | } | 
|  |  | 
|  | if (pm->suspend) { | 
|  | pci_power_t prev = pci_dev->current_state; | 
|  | int error; | 
|  |  | 
|  | error = pm->suspend(dev); | 
|  | suspend_report_result(pm->suspend, error); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0 | 
|  | && pci_dev->current_state != PCI_UNKNOWN) { | 
|  | WARN_ONCE(pci_dev->current_state != prev, | 
|  | "PCI PM: State of device not saved by %pF\n", | 
|  | pm->suspend); | 
|  | } | 
|  | } | 
|  |  | 
|  | Fixup: | 
|  | pci_fixup_device(pci_fixup_suspend, pci_dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pci_pm_suspend_noirq(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | 
|  |  | 
|  | if (pci_has_legacy_pm_support(pci_dev)) | 
|  | return pci_legacy_suspend_late(dev, PMSG_SUSPEND); | 
|  |  | 
|  | if (!pm) { | 
|  | pci_save_state(pci_dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (pm->suspend_noirq) { | 
|  | pci_power_t prev = pci_dev->current_state; | 
|  | int error; | 
|  |  | 
|  | error = pm->suspend_noirq(dev); | 
|  | suspend_report_result(pm->suspend_noirq, error); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0 | 
|  | && pci_dev->current_state != PCI_UNKNOWN) { | 
|  | WARN_ONCE(pci_dev->current_state != prev, | 
|  | "PCI PM: State of device not saved by %pF\n", | 
|  | pm->suspend_noirq); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!pci_dev->state_saved) { | 
|  | pci_save_state(pci_dev); | 
|  | if (!pci_is_bridge(pci_dev)) | 
|  | pci_prepare_to_sleep(pci_dev); | 
|  | } | 
|  |  | 
|  | pci_pm_set_unknown_state(pci_dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pci_pm_resume_noirq(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | struct device_driver *drv = dev->driver; | 
|  | int error = 0; | 
|  |  | 
|  | pci_pm_default_resume_early(pci_dev); | 
|  |  | 
|  | if (pci_has_legacy_pm_support(pci_dev)) | 
|  | return pci_legacy_resume_early(dev); | 
|  |  | 
|  | if (drv && drv->pm && drv->pm->resume_noirq) | 
|  | error = drv->pm->resume_noirq(dev); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int pci_pm_resume(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | 
|  | int error = 0; | 
|  |  | 
|  | /* | 
|  | * This is necessary for the suspend error path in which resume is | 
|  | * called without restoring the standard config registers of the device. | 
|  | */ | 
|  | if (pci_dev->state_saved) | 
|  | pci_restore_standard_config(pci_dev); | 
|  |  | 
|  | if (pci_has_legacy_pm_support(pci_dev)) | 
|  | return pci_legacy_resume(dev); | 
|  |  | 
|  | pci_pm_default_resume(pci_dev); | 
|  |  | 
|  | if (pm) { | 
|  | if (pm->resume) | 
|  | error = pm->resume(dev); | 
|  | } else { | 
|  | pci_pm_reenable_device(pci_dev); | 
|  | } | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | #else /* !CONFIG_SUSPEND */ | 
|  |  | 
|  | #define pci_pm_suspend		NULL | 
|  | #define pci_pm_suspend_noirq	NULL | 
|  | #define pci_pm_resume		NULL | 
|  | #define pci_pm_resume_noirq	NULL | 
|  |  | 
|  | #endif /* !CONFIG_SUSPEND */ | 
|  |  | 
|  | #ifdef CONFIG_HIBERNATE_CALLBACKS | 
|  |  | 
|  | static int pci_pm_freeze(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | 
|  |  | 
|  | if (pci_has_legacy_pm_support(pci_dev)) | 
|  | return pci_legacy_suspend(dev, PMSG_FREEZE); | 
|  |  | 
|  | if (!pm) { | 
|  | pci_pm_default_suspend(pci_dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (pm->freeze) { | 
|  | int error; | 
|  |  | 
|  | error = pm->freeze(dev); | 
|  | suspend_report_result(pm->freeze, error); | 
|  | if (error) | 
|  | return error; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pci_pm_freeze_noirq(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | struct device_driver *drv = dev->driver; | 
|  |  | 
|  | if (pci_has_legacy_pm_support(pci_dev)) | 
|  | return pci_legacy_suspend_late(dev, PMSG_FREEZE); | 
|  |  | 
|  | if (drv && drv->pm && drv->pm->freeze_noirq) { | 
|  | int error; | 
|  |  | 
|  | error = drv->pm->freeze_noirq(dev); | 
|  | suspend_report_result(drv->pm->freeze_noirq, error); | 
|  | if (error) | 
|  | return error; | 
|  | } | 
|  |  | 
|  | if (!pci_dev->state_saved) | 
|  | pci_save_state(pci_dev); | 
|  |  | 
|  | pci_pm_set_unknown_state(pci_dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pci_pm_thaw_noirq(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | struct device_driver *drv = dev->driver; | 
|  | int error = 0; | 
|  |  | 
|  | if (pci_has_legacy_pm_support(pci_dev)) | 
|  | return pci_legacy_resume_early(dev); | 
|  |  | 
|  | pci_update_current_state(pci_dev, PCI_D0); | 
|  |  | 
|  | if (drv && drv->pm && drv->pm->thaw_noirq) | 
|  | error = drv->pm->thaw_noirq(dev); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int pci_pm_thaw(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | 
|  | int error = 0; | 
|  |  | 
|  | if (pci_has_legacy_pm_support(pci_dev)) | 
|  | return pci_legacy_resume(dev); | 
|  |  | 
|  | if (pm) { | 
|  | if (pm->thaw) | 
|  | error = pm->thaw(dev); | 
|  | } else { | 
|  | pci_pm_reenable_device(pci_dev); | 
|  | } | 
|  |  | 
|  | pci_dev->state_saved = false; | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int pci_pm_poweroff(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | 
|  |  | 
|  | if (pci_has_legacy_pm_support(pci_dev)) | 
|  | return pci_legacy_suspend(dev, PMSG_HIBERNATE); | 
|  |  | 
|  | if (!pm) { | 
|  | pci_pm_default_suspend(pci_dev); | 
|  | goto Fixup; | 
|  | } | 
|  |  | 
|  | if (pm->poweroff) { | 
|  | int error; | 
|  |  | 
|  | error = pm->poweroff(dev); | 
|  | suspend_report_result(pm->poweroff, error); | 
|  | if (error) | 
|  | return error; | 
|  | } | 
|  |  | 
|  | Fixup: | 
|  | pci_fixup_device(pci_fixup_suspend, pci_dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pci_pm_poweroff_noirq(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | struct device_driver *drv = dev->driver; | 
|  |  | 
|  | if (pci_has_legacy_pm_support(to_pci_dev(dev))) | 
|  | return pci_legacy_suspend_late(dev, PMSG_HIBERNATE); | 
|  |  | 
|  | if (!drv || !drv->pm) | 
|  | return 0; | 
|  |  | 
|  | if (drv->pm->poweroff_noirq) { | 
|  | int error; | 
|  |  | 
|  | error = drv->pm->poweroff_noirq(dev); | 
|  | suspend_report_result(drv->pm->poweroff_noirq, error); | 
|  | if (error) | 
|  | return error; | 
|  | } | 
|  |  | 
|  | if (!pci_dev->state_saved && !pci_is_bridge(pci_dev)) | 
|  | pci_prepare_to_sleep(pci_dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pci_pm_restore_noirq(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | struct device_driver *drv = dev->driver; | 
|  | int error = 0; | 
|  |  | 
|  | pci_pm_default_resume_early(pci_dev); | 
|  |  | 
|  | if (pci_has_legacy_pm_support(pci_dev)) | 
|  | return pci_legacy_resume_early(dev); | 
|  |  | 
|  | if (drv && drv->pm && drv->pm->restore_noirq) | 
|  | error = drv->pm->restore_noirq(dev); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int pci_pm_restore(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | 
|  | int error = 0; | 
|  |  | 
|  | /* | 
|  | * This is necessary for the hibernation error path in which restore is | 
|  | * called without restoring the standard config registers of the device. | 
|  | */ | 
|  | if (pci_dev->state_saved) | 
|  | pci_restore_standard_config(pci_dev); | 
|  |  | 
|  | if (pci_has_legacy_pm_support(pci_dev)) | 
|  | return pci_legacy_resume(dev); | 
|  |  | 
|  | pci_pm_default_resume(pci_dev); | 
|  |  | 
|  | if (pm) { | 
|  | if (pm->restore) | 
|  | error = pm->restore(dev); | 
|  | } else { | 
|  | pci_pm_reenable_device(pci_dev); | 
|  | } | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | #else /* !CONFIG_HIBERNATE_CALLBACKS */ | 
|  |  | 
|  | #define pci_pm_freeze		NULL | 
|  | #define pci_pm_freeze_noirq	NULL | 
|  | #define pci_pm_thaw		NULL | 
|  | #define pci_pm_thaw_noirq	NULL | 
|  | #define pci_pm_poweroff		NULL | 
|  | #define pci_pm_poweroff_noirq	NULL | 
|  | #define pci_pm_restore		NULL | 
|  | #define pci_pm_restore_noirq	NULL | 
|  |  | 
|  | #endif /* !CONFIG_HIBERNATE_CALLBACKS */ | 
|  |  | 
|  | #ifdef CONFIG_PM_RUNTIME | 
|  |  | 
|  | static int pci_pm_runtime_suspend(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | 
|  | pci_power_t prev = pci_dev->current_state; | 
|  | int error; | 
|  |  | 
|  | if (!pm || !pm->runtime_suspend) | 
|  | return -ENOSYS; | 
|  |  | 
|  | error = pm->runtime_suspend(dev); | 
|  | suspend_report_result(pm->runtime_suspend, error); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | pci_fixup_device(pci_fixup_suspend, pci_dev); | 
|  |  | 
|  | if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0 | 
|  | && pci_dev->current_state != PCI_UNKNOWN) { | 
|  | WARN_ONCE(pci_dev->current_state != prev, | 
|  | "PCI PM: State of device not saved by %pF\n", | 
|  | pm->runtime_suspend); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (!pci_dev->state_saved) | 
|  | pci_save_state(pci_dev); | 
|  |  | 
|  | pci_finish_runtime_suspend(pci_dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pci_pm_runtime_resume(struct device *dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | 
|  |  | 
|  | if (!pm || !pm->runtime_resume) | 
|  | return -ENOSYS; | 
|  |  | 
|  | pci_pm_default_resume_early(pci_dev); | 
|  | __pci_enable_wake(pci_dev, PCI_D0, true, false); | 
|  | pci_fixup_device(pci_fixup_resume, pci_dev); | 
|  |  | 
|  | return pm->runtime_resume(dev); | 
|  | } | 
|  |  | 
|  | static int pci_pm_runtime_idle(struct device *dev) | 
|  | { | 
|  | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | 
|  |  | 
|  | if (!pm) | 
|  | return -ENOSYS; | 
|  |  | 
|  | if (pm->runtime_idle) { | 
|  | int ret = pm->runtime_idle(dev); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | pm_runtime_suspend(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #else /* !CONFIG_PM_RUNTIME */ | 
|  |  | 
|  | #define pci_pm_runtime_suspend	NULL | 
|  | #define pci_pm_runtime_resume	NULL | 
|  | #define pci_pm_runtime_idle	NULL | 
|  |  | 
|  | #endif /* !CONFIG_PM_RUNTIME */ | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  |  | 
|  | const struct dev_pm_ops pci_dev_pm_ops = { | 
|  | .prepare = pci_pm_prepare, | 
|  | .complete = pci_pm_complete, | 
|  | .suspend = pci_pm_suspend, | 
|  | .resume = pci_pm_resume, | 
|  | .freeze = pci_pm_freeze, | 
|  | .thaw = pci_pm_thaw, | 
|  | .poweroff = pci_pm_poweroff, | 
|  | .restore = pci_pm_restore, | 
|  | .suspend_noirq = pci_pm_suspend_noirq, | 
|  | .resume_noirq = pci_pm_resume_noirq, | 
|  | .freeze_noirq = pci_pm_freeze_noirq, | 
|  | .thaw_noirq = pci_pm_thaw_noirq, | 
|  | .poweroff_noirq = pci_pm_poweroff_noirq, | 
|  | .restore_noirq = pci_pm_restore_noirq, | 
|  | .runtime_suspend = pci_pm_runtime_suspend, | 
|  | .runtime_resume = pci_pm_runtime_resume, | 
|  | .runtime_idle = pci_pm_runtime_idle, | 
|  | }; | 
|  |  | 
|  | #define PCI_PM_OPS_PTR	(&pci_dev_pm_ops) | 
|  |  | 
|  | #else /* !COMFIG_PM_OPS */ | 
|  |  | 
|  | #define PCI_PM_OPS_PTR	NULL | 
|  |  | 
|  | #endif /* !COMFIG_PM_OPS */ | 
|  |  | 
|  | /** | 
|  | * __pci_register_driver - register a new pci driver | 
|  | * @drv: the driver structure to register | 
|  | * @owner: owner module of drv | 
|  | * @mod_name: module name string | 
|  | * | 
|  | * Adds the driver structure to the list of registered drivers. | 
|  | * Returns a negative value on error, otherwise 0. | 
|  | * If no error occurred, the driver remains registered even if | 
|  | * no device was claimed during registration. | 
|  | */ | 
|  | int __pci_register_driver(struct pci_driver *drv, struct module *owner, | 
|  | const char *mod_name) | 
|  | { | 
|  | int error; | 
|  |  | 
|  | /* initialize common driver fields */ | 
|  | drv->driver.name = drv->name; | 
|  | drv->driver.bus = &pci_bus_type; | 
|  | drv->driver.owner = owner; | 
|  | drv->driver.mod_name = mod_name; | 
|  |  | 
|  | spin_lock_init(&drv->dynids.lock); | 
|  | INIT_LIST_HEAD(&drv->dynids.list); | 
|  |  | 
|  | /* register with core */ | 
|  | error = driver_register(&drv->driver); | 
|  | if (error) | 
|  | goto out; | 
|  |  | 
|  | error = pci_create_newid_file(drv); | 
|  | if (error) | 
|  | goto out_newid; | 
|  |  | 
|  | error = pci_create_removeid_file(drv); | 
|  | if (error) | 
|  | goto out_removeid; | 
|  | out: | 
|  | return error; | 
|  |  | 
|  | out_removeid: | 
|  | pci_remove_newid_file(drv); | 
|  | out_newid: | 
|  | driver_unregister(&drv->driver); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_unregister_driver - unregister a pci driver | 
|  | * @drv: the driver structure to unregister | 
|  | * | 
|  | * Deletes the driver structure from the list of registered PCI drivers, | 
|  | * gives it a chance to clean up by calling its remove() function for | 
|  | * each device it was responsible for, and marks those devices as | 
|  | * driverless. | 
|  | */ | 
|  |  | 
|  | void | 
|  | pci_unregister_driver(struct pci_driver *drv) | 
|  | { | 
|  | pci_remove_removeid_file(drv); | 
|  | pci_remove_newid_file(drv); | 
|  | driver_unregister(&drv->driver); | 
|  | pci_free_dynids(drv); | 
|  | } | 
|  |  | 
|  | static struct pci_driver pci_compat_driver = { | 
|  | .name = "compat" | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * pci_dev_driver - get the pci_driver of a device | 
|  | * @dev: the device to query | 
|  | * | 
|  | * Returns the appropriate pci_driver structure or %NULL if there is no | 
|  | * registered driver for the device. | 
|  | */ | 
|  | struct pci_driver * | 
|  | pci_dev_driver(const struct pci_dev *dev) | 
|  | { | 
|  | if (dev->driver) | 
|  | return dev->driver; | 
|  | else { | 
|  | int i; | 
|  | for(i=0; i<=PCI_ROM_RESOURCE; i++) | 
|  | if (dev->resource[i].flags & IORESOURCE_BUSY) | 
|  | return &pci_compat_driver; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_bus_match - Tell if a PCI device structure has a matching PCI device id structure | 
|  | * @dev: the PCI device structure to match against | 
|  | * @drv: the device driver to search for matching PCI device id structures | 
|  | * | 
|  | * Used by a driver to check whether a PCI device present in the | 
|  | * system is in its list of supported devices. Returns the matching | 
|  | * pci_device_id structure or %NULL if there is no match. | 
|  | */ | 
|  | static int pci_bus_match(struct device *dev, struct device_driver *drv) | 
|  | { | 
|  | struct pci_dev *pci_dev = to_pci_dev(dev); | 
|  | struct pci_driver *pci_drv = to_pci_driver(drv); | 
|  | const struct pci_device_id *found_id; | 
|  |  | 
|  | found_id = pci_match_device(pci_drv, pci_dev); | 
|  | if (found_id) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_dev_get - increments the reference count of the pci device structure | 
|  | * @dev: the device being referenced | 
|  | * | 
|  | * Each live reference to a device should be refcounted. | 
|  | * | 
|  | * Drivers for PCI devices should normally record such references in | 
|  | * their probe() methods, when they bind to a device, and release | 
|  | * them by calling pci_dev_put(), in their disconnect() methods. | 
|  | * | 
|  | * A pointer to the device with the incremented reference counter is returned. | 
|  | */ | 
|  | struct pci_dev *pci_dev_get(struct pci_dev *dev) | 
|  | { | 
|  | if (dev) | 
|  | get_device(&dev->dev); | 
|  | return dev; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_dev_put - release a use of the pci device structure | 
|  | * @dev: device that's been disconnected | 
|  | * | 
|  | * Must be called when a user of a device is finished with it.  When the last | 
|  | * user of the device calls this function, the memory of the device is freed. | 
|  | */ | 
|  | void pci_dev_put(struct pci_dev *dev) | 
|  | { | 
|  | if (dev) | 
|  | put_device(&dev->dev); | 
|  | } | 
|  |  | 
|  | #ifndef CONFIG_HOTPLUG | 
|  | int pci_uevent(struct device *dev, struct kobj_uevent_env *env) | 
|  | { | 
|  | return -ENODEV; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | struct bus_type pci_bus_type = { | 
|  | .name		= "pci", | 
|  | .match		= pci_bus_match, | 
|  | .uevent		= pci_uevent, | 
|  | .probe		= pci_device_probe, | 
|  | .remove		= pci_device_remove, | 
|  | .shutdown	= pci_device_shutdown, | 
|  | .dev_attrs	= pci_dev_attrs, | 
|  | .bus_attrs	= pci_bus_attrs, | 
|  | .pm		= PCI_PM_OPS_PTR, | 
|  | }; | 
|  |  | 
|  | static int __init pci_driver_init(void) | 
|  | { | 
|  | return bus_register(&pci_bus_type); | 
|  | } | 
|  |  | 
|  | postcore_initcall(pci_driver_init); | 
|  |  | 
|  | EXPORT_SYMBOL_GPL(pci_add_dynid); | 
|  | EXPORT_SYMBOL(pci_match_id); | 
|  | EXPORT_SYMBOL(__pci_register_driver); | 
|  | EXPORT_SYMBOL(pci_unregister_driver); | 
|  | EXPORT_SYMBOL(pci_dev_driver); | 
|  | EXPORT_SYMBOL(pci_bus_type); | 
|  | EXPORT_SYMBOL(pci_dev_get); | 
|  | EXPORT_SYMBOL(pci_dev_put); |