|  | /* | 
|  | * A SPI driver for the Ricoh RS5C348 RTC | 
|  | * | 
|  | * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * The board specific init code should provide characteristics of this | 
|  | * device: | 
|  | *     Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS | 
|  | */ | 
|  |  | 
|  | #include <linux/bcd.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/rtc.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/spi/spi.h> | 
|  |  | 
|  | #define DRV_VERSION "0.2" | 
|  |  | 
|  | #define RS5C348_REG_SECS	0 | 
|  | #define RS5C348_REG_MINS	1 | 
|  | #define RS5C348_REG_HOURS	2 | 
|  | #define RS5C348_REG_WDAY	3 | 
|  | #define RS5C348_REG_DAY	4 | 
|  | #define RS5C348_REG_MONTH	5 | 
|  | #define RS5C348_REG_YEAR	6 | 
|  | #define RS5C348_REG_CTL1	14 | 
|  | #define RS5C348_REG_CTL2	15 | 
|  |  | 
|  | #define RS5C348_SECS_MASK	0x7f | 
|  | #define RS5C348_MINS_MASK	0x7f | 
|  | #define RS5C348_HOURS_MASK	0x3f | 
|  | #define RS5C348_WDAY_MASK	0x03 | 
|  | #define RS5C348_DAY_MASK	0x3f | 
|  | #define RS5C348_MONTH_MASK	0x1f | 
|  |  | 
|  | #define RS5C348_BIT_PM	0x20	/* REG_HOURS */ | 
|  | #define RS5C348_BIT_Y2K	0x80	/* REG_MONTH */ | 
|  | #define RS5C348_BIT_24H	0x20	/* REG_CTL1 */ | 
|  | #define RS5C348_BIT_XSTP	0x10	/* REG_CTL2 */ | 
|  | #define RS5C348_BIT_VDET	0x40	/* REG_CTL2 */ | 
|  |  | 
|  | #define RS5C348_CMD_W(addr)	(((addr) << 4) | 0x08)	/* single write */ | 
|  | #define RS5C348_CMD_R(addr)	(((addr) << 4) | 0x0c)	/* single read */ | 
|  | #define RS5C348_CMD_MW(addr)	(((addr) << 4) | 0x00)	/* burst write */ | 
|  | #define RS5C348_CMD_MR(addr)	(((addr) << 4) | 0x04)	/* burst read */ | 
|  |  | 
|  | struct rs5c348_plat_data { | 
|  | struct rtc_device *rtc; | 
|  | int rtc_24h; | 
|  | }; | 
|  |  | 
|  | static int | 
|  | rs5c348_rtc_set_time(struct device *dev, struct rtc_time *tm) | 
|  | { | 
|  | struct spi_device *spi = to_spi_device(dev); | 
|  | struct rs5c348_plat_data *pdata = spi->dev.platform_data; | 
|  | u8 txbuf[5+7], *txp; | 
|  | int ret; | 
|  |  | 
|  | /* Transfer 5 bytes before writing SEC.  This gives 31us for carry. */ | 
|  | txp = txbuf; | 
|  | txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */ | 
|  | txbuf[1] = 0;	/* dummy */ | 
|  | txbuf[2] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */ | 
|  | txbuf[3] = 0;	/* dummy */ | 
|  | txbuf[4] = RS5C348_CMD_MW(RS5C348_REG_SECS); /* cmd, sec, ... */ | 
|  | txp = &txbuf[5]; | 
|  | txp[RS5C348_REG_SECS] = bin2bcd(tm->tm_sec); | 
|  | txp[RS5C348_REG_MINS] = bin2bcd(tm->tm_min); | 
|  | if (pdata->rtc_24h) { | 
|  | txp[RS5C348_REG_HOURS] = bin2bcd(tm->tm_hour); | 
|  | } else { | 
|  | /* hour 0 is AM12, noon is PM12 */ | 
|  | txp[RS5C348_REG_HOURS] = bin2bcd((tm->tm_hour + 11) % 12 + 1) | | 
|  | (tm->tm_hour >= 12 ? RS5C348_BIT_PM : 0); | 
|  | } | 
|  | txp[RS5C348_REG_WDAY] = bin2bcd(tm->tm_wday); | 
|  | txp[RS5C348_REG_DAY] = bin2bcd(tm->tm_mday); | 
|  | txp[RS5C348_REG_MONTH] = bin2bcd(tm->tm_mon + 1) | | 
|  | (tm->tm_year >= 100 ? RS5C348_BIT_Y2K : 0); | 
|  | txp[RS5C348_REG_YEAR] = bin2bcd(tm->tm_year % 100); | 
|  | /* write in one transfer to avoid data inconsistency */ | 
|  | ret = spi_write_then_read(spi, txbuf, sizeof(txbuf), NULL, 0); | 
|  | udelay(62);	/* Tcsr 62us */ | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rs5c348_rtc_read_time(struct device *dev, struct rtc_time *tm) | 
|  | { | 
|  | struct spi_device *spi = to_spi_device(dev); | 
|  | struct rs5c348_plat_data *pdata = spi->dev.platform_data; | 
|  | u8 txbuf[5], rxbuf[7]; | 
|  | int ret; | 
|  |  | 
|  | /* Transfer 5 byte befores reading SEC.  This gives 31us for carry. */ | 
|  | txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */ | 
|  | txbuf[1] = 0;	/* dummy */ | 
|  | txbuf[2] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */ | 
|  | txbuf[3] = 0;	/* dummy */ | 
|  | txbuf[4] = RS5C348_CMD_MR(RS5C348_REG_SECS); /* cmd, sec, ... */ | 
|  |  | 
|  | /* read in one transfer to avoid data inconsistency */ | 
|  | ret = spi_write_then_read(spi, txbuf, sizeof(txbuf), | 
|  | rxbuf, sizeof(rxbuf)); | 
|  | udelay(62);	/* Tcsr 62us */ | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | tm->tm_sec = bcd2bin(rxbuf[RS5C348_REG_SECS] & RS5C348_SECS_MASK); | 
|  | tm->tm_min = bcd2bin(rxbuf[RS5C348_REG_MINS] & RS5C348_MINS_MASK); | 
|  | tm->tm_hour = bcd2bin(rxbuf[RS5C348_REG_HOURS] & RS5C348_HOURS_MASK); | 
|  | if (!pdata->rtc_24h) { | 
|  | tm->tm_hour %= 12; | 
|  | if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM) | 
|  | tm->tm_hour += 12; | 
|  | } | 
|  | tm->tm_wday = bcd2bin(rxbuf[RS5C348_REG_WDAY] & RS5C348_WDAY_MASK); | 
|  | tm->tm_mday = bcd2bin(rxbuf[RS5C348_REG_DAY] & RS5C348_DAY_MASK); | 
|  | tm->tm_mon = | 
|  | bcd2bin(rxbuf[RS5C348_REG_MONTH] & RS5C348_MONTH_MASK) - 1; | 
|  | /* year is 1900 + tm->tm_year */ | 
|  | tm->tm_year = bcd2bin(rxbuf[RS5C348_REG_YEAR]) + | 
|  | ((rxbuf[RS5C348_REG_MONTH] & RS5C348_BIT_Y2K) ? 100 : 0); | 
|  |  | 
|  | if (rtc_valid_tm(tm) < 0) { | 
|  | dev_err(&spi->dev, "retrieved date/time is not valid.\n"); | 
|  | rtc_time_to_tm(0, tm); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct rtc_class_ops rs5c348_rtc_ops = { | 
|  | .read_time	= rs5c348_rtc_read_time, | 
|  | .set_time	= rs5c348_rtc_set_time, | 
|  | }; | 
|  |  | 
|  | static struct spi_driver rs5c348_driver; | 
|  |  | 
|  | static int __devinit rs5c348_probe(struct spi_device *spi) | 
|  | { | 
|  | int ret; | 
|  | struct rtc_device *rtc; | 
|  | struct rs5c348_plat_data *pdata; | 
|  |  | 
|  | pdata = kzalloc(sizeof(struct rs5c348_plat_data), GFP_KERNEL); | 
|  | if (!pdata) | 
|  | return -ENOMEM; | 
|  | spi->dev.platform_data = pdata; | 
|  |  | 
|  | /* Check D7 of SECOND register */ | 
|  | ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_SECS)); | 
|  | if (ret < 0 || (ret & 0x80)) { | 
|  | dev_err(&spi->dev, "not found.\n"); | 
|  | goto kfree_exit; | 
|  | } | 
|  |  | 
|  | dev_info(&spi->dev, "chip found, driver version " DRV_VERSION "\n"); | 
|  | dev_info(&spi->dev, "spiclk %u KHz.\n", | 
|  | (spi->max_speed_hz + 500) / 1000); | 
|  |  | 
|  | /* turn RTC on if it was not on */ | 
|  | ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL2)); | 
|  | if (ret < 0) | 
|  | goto kfree_exit; | 
|  | if (ret & (RS5C348_BIT_XSTP | RS5C348_BIT_VDET)) { | 
|  | u8 buf[2]; | 
|  | struct rtc_time tm; | 
|  | if (ret & RS5C348_BIT_VDET) | 
|  | dev_warn(&spi->dev, "voltage-low detected.\n"); | 
|  | if (ret & RS5C348_BIT_XSTP) | 
|  | dev_warn(&spi->dev, "oscillator-stop detected.\n"); | 
|  | rtc_time_to_tm(0, &tm);	/* 1970/1/1 */ | 
|  | ret = rs5c348_rtc_set_time(&spi->dev, &tm); | 
|  | if (ret < 0) | 
|  | goto kfree_exit; | 
|  | buf[0] = RS5C348_CMD_W(RS5C348_REG_CTL2); | 
|  | buf[1] = 0; | 
|  | ret = spi_write_then_read(spi, buf, sizeof(buf), NULL, 0); | 
|  | if (ret < 0) | 
|  | goto kfree_exit; | 
|  | } | 
|  |  | 
|  | ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL1)); | 
|  | if (ret < 0) | 
|  | goto kfree_exit; | 
|  | if (ret & RS5C348_BIT_24H) | 
|  | pdata->rtc_24h = 1; | 
|  |  | 
|  | rtc = rtc_device_register(rs5c348_driver.driver.name, &spi->dev, | 
|  | &rs5c348_rtc_ops, THIS_MODULE); | 
|  |  | 
|  | if (IS_ERR(rtc)) { | 
|  | ret = PTR_ERR(rtc); | 
|  | goto kfree_exit; | 
|  | } | 
|  |  | 
|  | pdata->rtc = rtc; | 
|  |  | 
|  | return 0; | 
|  | kfree_exit: | 
|  | kfree(pdata); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devexit rs5c348_remove(struct spi_device *spi) | 
|  | { | 
|  | struct rs5c348_plat_data *pdata = spi->dev.platform_data; | 
|  | struct rtc_device *rtc = pdata->rtc; | 
|  |  | 
|  | if (rtc) | 
|  | rtc_device_unregister(rtc); | 
|  | kfree(pdata); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct spi_driver rs5c348_driver = { | 
|  | .driver = { | 
|  | .name	= "rtc-rs5c348", | 
|  | .bus	= &spi_bus_type, | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | .probe	= rs5c348_probe, | 
|  | .remove	= __devexit_p(rs5c348_remove), | 
|  | }; | 
|  |  | 
|  | static __init int rs5c348_init(void) | 
|  | { | 
|  | return spi_register_driver(&rs5c348_driver); | 
|  | } | 
|  |  | 
|  | static __exit void rs5c348_exit(void) | 
|  | { | 
|  | spi_unregister_driver(&rs5c348_driver); | 
|  | } | 
|  |  | 
|  | module_init(rs5c348_init); | 
|  | module_exit(rs5c348_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>"); | 
|  | MODULE_DESCRIPTION("Ricoh RS5C348 RTC driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(DRV_VERSION); | 
|  | MODULE_ALIAS("spi:rtc-rs5c348"); |