|  | /* | 
|  | *   This program is free software; you can redistribute it and/or modify | 
|  | *   it under the terms of the GNU General Public License as published by | 
|  | *   the Free Software Foundation; either version 2 of the License, or | 
|  | *   (at your option) any later version. | 
|  | * | 
|  | *   This program is distributed in the hope that it will be useful, | 
|  | *   but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *   GNU General Public License for more details. | 
|  | * | 
|  | *   You should have received a copy of the GNU General Public License | 
|  | *   along with this program; if not, write to the Free Software | 
|  | *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/audio.h> | 
|  |  | 
|  | #include <sound/control.h> | 
|  | #include <sound/core.h> | 
|  | #include <sound/info.h> | 
|  | #include <sound/pcm.h> | 
|  |  | 
|  | #include "usbaudio.h" | 
|  | #include "card.h" | 
|  | #include "mixer.h" | 
|  | #include "mixer_quirks.h" | 
|  | #include "midi.h" | 
|  | #include "quirks.h" | 
|  | #include "helper.h" | 
|  | #include "endpoint.h" | 
|  | #include "pcm.h" | 
|  | #include "clock.h" | 
|  |  | 
|  | /* | 
|  | * handle the quirks for the contained interfaces | 
|  | */ | 
|  | static int create_composite_quirk(struct snd_usb_audio *chip, | 
|  | struct usb_interface *iface, | 
|  | struct usb_driver *driver, | 
|  | const struct snd_usb_audio_quirk *quirk) | 
|  | { | 
|  | int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber; | 
|  | int err; | 
|  |  | 
|  | for (quirk = quirk->data; quirk->ifnum >= 0; ++quirk) { | 
|  | iface = usb_ifnum_to_if(chip->dev, quirk->ifnum); | 
|  | if (!iface) | 
|  | continue; | 
|  | if (quirk->ifnum != probed_ifnum && | 
|  | usb_interface_claimed(iface)) | 
|  | continue; | 
|  | err = snd_usb_create_quirk(chip, iface, driver, quirk); | 
|  | if (err < 0) | 
|  | return err; | 
|  | if (quirk->ifnum != probed_ifnum) | 
|  | usb_driver_claim_interface(driver, iface, (void *)-1L); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ignore_interface_quirk(struct snd_usb_audio *chip, | 
|  | struct usb_interface *iface, | 
|  | struct usb_driver *driver, | 
|  | const struct snd_usb_audio_quirk *quirk) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Allow alignment on audio sub-slot (channel samples) rather than | 
|  | * on audio slots (audio frames) | 
|  | */ | 
|  | static int create_align_transfer_quirk(struct snd_usb_audio *chip, | 
|  | struct usb_interface *iface, | 
|  | struct usb_driver *driver, | 
|  | const struct snd_usb_audio_quirk *quirk) | 
|  | { | 
|  | chip->txfr_quirk = 1; | 
|  | return 1;	/* Continue with creating streams and mixer */ | 
|  | } | 
|  |  | 
|  | static int create_any_midi_quirk(struct snd_usb_audio *chip, | 
|  | struct usb_interface *intf, | 
|  | struct usb_driver *driver, | 
|  | const struct snd_usb_audio_quirk *quirk) | 
|  | { | 
|  | return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * create a stream for an interface with proper descriptors | 
|  | */ | 
|  | static int create_standard_audio_quirk(struct snd_usb_audio *chip, | 
|  | struct usb_interface *iface, | 
|  | struct usb_driver *driver, | 
|  | const struct snd_usb_audio_quirk *quirk) | 
|  | { | 
|  | struct usb_host_interface *alts; | 
|  | struct usb_interface_descriptor *altsd; | 
|  | int err; | 
|  |  | 
|  | alts = &iface->altsetting[0]; | 
|  | altsd = get_iface_desc(alts); | 
|  | err = snd_usb_parse_audio_endpoints(chip, altsd->bInterfaceNumber); | 
|  | if (err < 0) { | 
|  | snd_printk(KERN_ERR "cannot setup if %d: error %d\n", | 
|  | altsd->bInterfaceNumber, err); | 
|  | return err; | 
|  | } | 
|  | /* reset the current interface */ | 
|  | usb_set_interface(chip->dev, altsd->bInterfaceNumber, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * create a stream for an endpoint/altsetting without proper descriptors | 
|  | */ | 
|  | static int create_fixed_stream_quirk(struct snd_usb_audio *chip, | 
|  | struct usb_interface *iface, | 
|  | struct usb_driver *driver, | 
|  | const struct snd_usb_audio_quirk *quirk) | 
|  | { | 
|  | struct audioformat *fp; | 
|  | struct usb_host_interface *alts; | 
|  | int stream, err; | 
|  | unsigned *rate_table = NULL; | 
|  |  | 
|  | fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL); | 
|  | if (! fp) { | 
|  | snd_printk(KERN_ERR "cannot memdup\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | if (fp->nr_rates > 0) { | 
|  | rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL); | 
|  | if (!rate_table) { | 
|  | kfree(fp); | 
|  | return -ENOMEM; | 
|  | } | 
|  | memcpy(rate_table, fp->rate_table, sizeof(int) * fp->nr_rates); | 
|  | fp->rate_table = rate_table; | 
|  | } | 
|  |  | 
|  | stream = (fp->endpoint & USB_DIR_IN) | 
|  | ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; | 
|  | err = snd_usb_add_audio_endpoint(chip, stream, fp); | 
|  | if (err < 0) { | 
|  | kfree(fp); | 
|  | kfree(rate_table); | 
|  | return err; | 
|  | } | 
|  | if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber || | 
|  | fp->altset_idx >= iface->num_altsetting) { | 
|  | kfree(fp); | 
|  | kfree(rate_table); | 
|  | return -EINVAL; | 
|  | } | 
|  | alts = &iface->altsetting[fp->altset_idx]; | 
|  | fp->datainterval = snd_usb_parse_datainterval(chip, alts); | 
|  | fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); | 
|  | usb_set_interface(chip->dev, fp->iface, 0); | 
|  | snd_usb_init_pitch(chip, fp->iface, alts, fp); | 
|  | snd_usb_init_sample_rate(chip, fp->iface, alts, fp, fp->rate_max); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface. | 
|  | * The only way to detect the sample rate is by looking at wMaxPacketSize. | 
|  | */ | 
|  | static int create_uaxx_quirk(struct snd_usb_audio *chip, | 
|  | struct usb_interface *iface, | 
|  | struct usb_driver *driver, | 
|  | const struct snd_usb_audio_quirk *quirk) | 
|  | { | 
|  | static const struct audioformat ua_format = { | 
|  | .formats = SNDRV_PCM_FMTBIT_S24_3LE, | 
|  | .channels = 2, | 
|  | .fmt_type = UAC_FORMAT_TYPE_I, | 
|  | .altsetting = 1, | 
|  | .altset_idx = 1, | 
|  | .rates = SNDRV_PCM_RATE_CONTINUOUS, | 
|  | }; | 
|  | struct usb_host_interface *alts; | 
|  | struct usb_interface_descriptor *altsd; | 
|  | struct audioformat *fp; | 
|  | int stream, err; | 
|  |  | 
|  | /* both PCM and MIDI interfaces have 2 or more altsettings */ | 
|  | if (iface->num_altsetting < 2) | 
|  | return -ENXIO; | 
|  | alts = &iface->altsetting[1]; | 
|  | altsd = get_iface_desc(alts); | 
|  |  | 
|  | if (altsd->bNumEndpoints == 2) { | 
|  | static const struct snd_usb_midi_endpoint_info ua700_ep = { | 
|  | .out_cables = 0x0003, | 
|  | .in_cables  = 0x0003 | 
|  | }; | 
|  | static const struct snd_usb_audio_quirk ua700_quirk = { | 
|  | .type = QUIRK_MIDI_FIXED_ENDPOINT, | 
|  | .data = &ua700_ep | 
|  | }; | 
|  | static const struct snd_usb_midi_endpoint_info uaxx_ep = { | 
|  | .out_cables = 0x0001, | 
|  | .in_cables  = 0x0001 | 
|  | }; | 
|  | static const struct snd_usb_audio_quirk uaxx_quirk = { | 
|  | .type = QUIRK_MIDI_FIXED_ENDPOINT, | 
|  | .data = &uaxx_ep | 
|  | }; | 
|  | const struct snd_usb_audio_quirk *quirk = | 
|  | chip->usb_id == USB_ID(0x0582, 0x002b) | 
|  | ? &ua700_quirk : &uaxx_quirk; | 
|  | return snd_usbmidi_create(chip->card, iface, | 
|  | &chip->midi_list, quirk); | 
|  | } | 
|  |  | 
|  | if (altsd->bNumEndpoints != 1) | 
|  | return -ENXIO; | 
|  |  | 
|  | fp = kmalloc(sizeof(*fp), GFP_KERNEL); | 
|  | if (!fp) | 
|  | return -ENOMEM; | 
|  | memcpy(fp, &ua_format, sizeof(*fp)); | 
|  |  | 
|  | fp->iface = altsd->bInterfaceNumber; | 
|  | fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress; | 
|  | fp->ep_attr = get_endpoint(alts, 0)->bmAttributes; | 
|  | fp->datainterval = 0; | 
|  | fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); | 
|  |  | 
|  | switch (fp->maxpacksize) { | 
|  | case 0x120: | 
|  | fp->rate_max = fp->rate_min = 44100; | 
|  | break; | 
|  | case 0x138: | 
|  | case 0x140: | 
|  | fp->rate_max = fp->rate_min = 48000; | 
|  | break; | 
|  | case 0x258: | 
|  | case 0x260: | 
|  | fp->rate_max = fp->rate_min = 96000; | 
|  | break; | 
|  | default: | 
|  | snd_printk(KERN_ERR "unknown sample rate\n"); | 
|  | kfree(fp); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | stream = (fp->endpoint & USB_DIR_IN) | 
|  | ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; | 
|  | err = snd_usb_add_audio_endpoint(chip, stream, fp); | 
|  | if (err < 0) { | 
|  | kfree(fp); | 
|  | return err; | 
|  | } | 
|  | usb_set_interface(chip->dev, fp->iface, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Create a standard mixer for the specified interface. | 
|  | */ | 
|  | static int create_standard_mixer_quirk(struct snd_usb_audio *chip, | 
|  | struct usb_interface *iface, | 
|  | struct usb_driver *driver, | 
|  | const struct snd_usb_audio_quirk *quirk) | 
|  | { | 
|  | if (quirk->ifnum < 0) | 
|  | return 0; | 
|  |  | 
|  | return snd_usb_create_mixer(chip, quirk->ifnum, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * audio-interface quirks | 
|  | * | 
|  | * returns zero if no standard audio/MIDI parsing is needed. | 
|  | * returns a positive value if standard audio/midi interfaces are parsed | 
|  | * after this. | 
|  | * returns a negative value at error. | 
|  | */ | 
|  | int snd_usb_create_quirk(struct snd_usb_audio *chip, | 
|  | struct usb_interface *iface, | 
|  | struct usb_driver *driver, | 
|  | const struct snd_usb_audio_quirk *quirk) | 
|  | { | 
|  | typedef int (*quirk_func_t)(struct snd_usb_audio *, | 
|  | struct usb_interface *, | 
|  | struct usb_driver *, | 
|  | const struct snd_usb_audio_quirk *); | 
|  | static const quirk_func_t quirk_funcs[] = { | 
|  | [QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk, | 
|  | [QUIRK_COMPOSITE] = create_composite_quirk, | 
|  | [QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk, | 
|  | [QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk, | 
|  | [QUIRK_MIDI_YAMAHA] = create_any_midi_quirk, | 
|  | [QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk, | 
|  | [QUIRK_MIDI_NOVATION] = create_any_midi_quirk, | 
|  | [QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk, | 
|  | [QUIRK_MIDI_EMAGIC] = create_any_midi_quirk, | 
|  | [QUIRK_MIDI_CME] = create_any_midi_quirk, | 
|  | [QUIRK_MIDI_AKAI] = create_any_midi_quirk, | 
|  | [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, | 
|  | [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk, | 
|  | [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk, | 
|  | [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk, | 
|  | [QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk, | 
|  | }; | 
|  |  | 
|  | if (quirk->type < QUIRK_TYPE_COUNT) { | 
|  | return quirk_funcs[quirk->type](chip, iface, driver, quirk); | 
|  | } else { | 
|  | snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type); | 
|  | return -ENXIO; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * boot quirks | 
|  | */ | 
|  |  | 
|  | #define EXTIGY_FIRMWARE_SIZE_OLD 794 | 
|  | #define EXTIGY_FIRMWARE_SIZE_NEW 483 | 
|  |  | 
|  | static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf) | 
|  | { | 
|  | struct usb_host_config *config = dev->actconfig; | 
|  | int err; | 
|  |  | 
|  | if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD || | 
|  | le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) { | 
|  | snd_printdd("sending Extigy boot sequence...\n"); | 
|  | /* Send message to force it to reconnect with full interface. */ | 
|  | err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0), | 
|  | 0x10, 0x43, 0x0001, 0x000a, NULL, 0, 1000); | 
|  | if (err < 0) snd_printdd("error sending boot message: %d\n", err); | 
|  | err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, | 
|  | &dev->descriptor, sizeof(dev->descriptor)); | 
|  | config = dev->actconfig; | 
|  | if (err < 0) snd_printdd("error usb_get_descriptor: %d\n", err); | 
|  | err = usb_reset_configuration(dev); | 
|  | if (err < 0) snd_printdd("error usb_reset_configuration: %d\n", err); | 
|  | snd_printdd("extigy_boot: new boot length = %d\n", | 
|  | le16_to_cpu(get_cfg_desc(config)->wTotalLength)); | 
|  | return -ENODEV; /* quit this anyway */ | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev) | 
|  | { | 
|  | u8 buf = 1; | 
|  |  | 
|  | snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a, | 
|  | USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER, | 
|  | 0, 0, &buf, 1, 1000); | 
|  | if (buf == 0) { | 
|  | snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29, | 
|  | USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, | 
|  | 1, 2000, NULL, 0, 1000); | 
|  | return -ENODEV; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely | 
|  | * documented in the device's data sheet. | 
|  | */ | 
|  | static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value) | 
|  | { | 
|  | u8 buf[4]; | 
|  | buf[0] = 0x20; | 
|  | buf[1] = value & 0xff; | 
|  | buf[2] = (value >> 8) & 0xff; | 
|  | buf[3] = reg; | 
|  | return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION, | 
|  | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, | 
|  | 0, 0, &buf, 4, 1000); | 
|  | } | 
|  |  | 
|  | static int snd_usb_cm106_boot_quirk(struct usb_device *dev) | 
|  | { | 
|  | /* | 
|  | * Enable line-out driver mode, set headphone source to front | 
|  | * channels, enable stereo mic. | 
|  | */ | 
|  | return snd_usb_cm106_write_int_reg(dev, 2, 0x8004); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * C-Media CM6206 is based on CM106 with two additional | 
|  | * registers that are not documented in the data sheet. | 
|  | * Values here are chosen based on sniffing USB traffic | 
|  | * under Windows. | 
|  | */ | 
|  | static int snd_usb_cm6206_boot_quirk(struct usb_device *dev) | 
|  | { | 
|  | int err, reg; | 
|  | int val[] = {0x2004, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000}; | 
|  |  | 
|  | for (reg = 0; reg < ARRAY_SIZE(val); reg++) { | 
|  | err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]); | 
|  | if (err < 0) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This call will put the synth in "USB send" mode, i.e it will send MIDI | 
|  | * messages through USB (this is disabled at startup). The synth will | 
|  | * acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB | 
|  | * sign on its LCD. Values here are chosen based on sniffing USB traffic | 
|  | * under Windows. | 
|  | */ | 
|  | static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev) | 
|  | { | 
|  | int err, actual_length; | 
|  |  | 
|  | /* "midi send" enable */ | 
|  | static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 }; | 
|  |  | 
|  | void *buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL); | 
|  | if (!buf) | 
|  | return -ENOMEM; | 
|  | err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf, | 
|  | ARRAY_SIZE(seq), &actual_length, 1000); | 
|  | kfree(buf); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Some sound cards from Native Instruments are in fact compliant to the USB | 
|  | * audio standard of version 2 and other approved USB standards, even though | 
|  | * they come up as vendor-specific device when first connected. | 
|  | * | 
|  | * However, they can be told to come up with a new set of descriptors | 
|  | * upon their next enumeration, and the interfaces announced by the new | 
|  | * descriptors will then be handled by the kernel's class drivers. As the | 
|  | * product ID will also change, no further checks are required. | 
|  | */ | 
|  |  | 
|  | static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev) | 
|  | { | 
|  | int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | 
|  | 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE, | 
|  | cpu_to_le16(1), 0, NULL, 0, 1000); | 
|  |  | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | usb_reset_device(dev); | 
|  |  | 
|  | /* return -EAGAIN, so the creation of an audio interface for this | 
|  | * temporary device is aborted. The device will reconnect with a | 
|  | * new product ID */ | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Setup quirks | 
|  | */ | 
|  | #define AUDIOPHILE_SET			0x01 /* if set, parse device_setup */ | 
|  | #define AUDIOPHILE_SET_DTS              0x02 /* if set, enable DTS Digital Output */ | 
|  | #define AUDIOPHILE_SET_96K              0x04 /* 48-96KHz rate if set, 8-48KHz otherwise */ | 
|  | #define AUDIOPHILE_SET_24B		0x08 /* 24bits sample if set, 16bits otherwise */ | 
|  | #define AUDIOPHILE_SET_DI		0x10 /* if set, enable Digital Input */ | 
|  | #define AUDIOPHILE_SET_MASK		0x1F /* bit mask for setup value */ | 
|  | #define AUDIOPHILE_SET_24B_48K_DI	0x19 /* value for 24bits+48KHz+Digital Input */ | 
|  | #define AUDIOPHILE_SET_24B_48K_NOTDI	0x09 /* value for 24bits+48KHz+No Digital Input */ | 
|  | #define AUDIOPHILE_SET_16B_48K_DI	0x11 /* value for 16bits+48KHz+Digital Input */ | 
|  | #define AUDIOPHILE_SET_16B_48K_NOTDI	0x01 /* value for 16bits+48KHz+No Digital Input */ | 
|  |  | 
|  | static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip, | 
|  | int iface, | 
|  | int altno) | 
|  | { | 
|  | /* Reset ALL ifaces to 0 altsetting. | 
|  | * Call it for every possible altsetting of every interface. | 
|  | */ | 
|  | usb_set_interface(chip->dev, iface, 0); | 
|  |  | 
|  | if (chip->setup & AUDIOPHILE_SET) { | 
|  | if ((chip->setup & AUDIOPHILE_SET_DTS) | 
|  | && altno != 6) | 
|  | return 1; /* skip this altsetting */ | 
|  | if ((chip->setup & AUDIOPHILE_SET_96K) | 
|  | && altno != 1) | 
|  | return 1; /* skip this altsetting */ | 
|  | if ((chip->setup & AUDIOPHILE_SET_MASK) == | 
|  | AUDIOPHILE_SET_24B_48K_DI && altno != 2) | 
|  | return 1; /* skip this altsetting */ | 
|  | if ((chip->setup & AUDIOPHILE_SET_MASK) == | 
|  | AUDIOPHILE_SET_24B_48K_NOTDI && altno != 3) | 
|  | return 1; /* skip this altsetting */ | 
|  | if ((chip->setup & AUDIOPHILE_SET_MASK) == | 
|  | AUDIOPHILE_SET_16B_48K_DI && altno != 4) | 
|  | return 1; /* skip this altsetting */ | 
|  | if ((chip->setup & AUDIOPHILE_SET_MASK) == | 
|  | AUDIOPHILE_SET_16B_48K_NOTDI && altno != 5) | 
|  | return 1; /* skip this altsetting */ | 
|  | } | 
|  |  | 
|  | return 0; /* keep this altsetting */ | 
|  | } | 
|  |  | 
|  | int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip, | 
|  | int iface, | 
|  | int altno) | 
|  | { | 
|  | /* audiophile usb: skip altsets incompatible with device_setup */ | 
|  | if (chip->usb_id == USB_ID(0x0763, 0x2003)) | 
|  | return audiophile_skip_setting_quirk(chip, iface, altno); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int snd_usb_apply_boot_quirk(struct usb_device *dev, | 
|  | struct usb_interface *intf, | 
|  | const struct snd_usb_audio_quirk *quirk) | 
|  | { | 
|  | u32 id = USB_ID(le16_to_cpu(dev->descriptor.idVendor), | 
|  | le16_to_cpu(dev->descriptor.idProduct)); | 
|  |  | 
|  | switch (id) { | 
|  | case USB_ID(0x041e, 0x3000): | 
|  | /* SB Extigy needs special boot-up sequence */ | 
|  | /* if more models come, this will go to the quirk list. */ | 
|  | return snd_usb_extigy_boot_quirk(dev, intf); | 
|  |  | 
|  | case USB_ID(0x041e, 0x3020): | 
|  | /* SB Audigy 2 NX needs its own boot-up magic, too */ | 
|  | return snd_usb_audigy2nx_boot_quirk(dev); | 
|  |  | 
|  | case USB_ID(0x10f5, 0x0200): | 
|  | /* C-Media CM106 / Turtle Beach Audio Advantage Roadie */ | 
|  | return snd_usb_cm106_boot_quirk(dev); | 
|  |  | 
|  | case USB_ID(0x0d8c, 0x0102): | 
|  | /* C-Media CM6206 / CM106-Like Sound Device */ | 
|  | case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */ | 
|  | return snd_usb_cm6206_boot_quirk(dev); | 
|  |  | 
|  | case USB_ID(0x133e, 0x0815): | 
|  | /* Access Music VirusTI Desktop */ | 
|  | return snd_usb_accessmusic_boot_quirk(dev); | 
|  |  | 
|  | case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */ | 
|  | case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */ | 
|  | case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */ | 
|  | return snd_usb_nativeinstruments_boot_quirk(dev); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * check if the device uses big-endian samples | 
|  | */ | 
|  | int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp) | 
|  | { | 
|  | switch (chip->usb_id) { | 
|  | case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */ | 
|  | if (fp->endpoint & USB_DIR_IN) | 
|  | return 1; | 
|  | break; | 
|  | case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ | 
|  | if (chip->setup == 0x00 || | 
|  | fp->altsetting==1 || fp->altsetting==2 || fp->altsetting==3) | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device, | 
|  | * not for interface. | 
|  | */ | 
|  |  | 
|  | enum { | 
|  | EMU_QUIRK_SR_44100HZ = 0, | 
|  | EMU_QUIRK_SR_48000HZ, | 
|  | EMU_QUIRK_SR_88200HZ, | 
|  | EMU_QUIRK_SR_96000HZ, | 
|  | EMU_QUIRK_SR_176400HZ, | 
|  | EMU_QUIRK_SR_192000HZ | 
|  | }; | 
|  |  | 
|  | static void set_format_emu_quirk(struct snd_usb_substream *subs, | 
|  | struct audioformat *fmt) | 
|  | { | 
|  | unsigned char emu_samplerate_id = 0; | 
|  |  | 
|  | /* When capture is active | 
|  | * sample rate shouldn't be changed | 
|  | * by playback substream | 
|  | */ | 
|  | if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) { | 
|  | if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1) | 
|  | return; | 
|  | } | 
|  |  | 
|  | switch (fmt->rate_min) { | 
|  | case 48000: | 
|  | emu_samplerate_id = EMU_QUIRK_SR_48000HZ; | 
|  | break; | 
|  | case 88200: | 
|  | emu_samplerate_id = EMU_QUIRK_SR_88200HZ; | 
|  | break; | 
|  | case 96000: | 
|  | emu_samplerate_id = EMU_QUIRK_SR_96000HZ; | 
|  | break; | 
|  | case 176400: | 
|  | emu_samplerate_id = EMU_QUIRK_SR_176400HZ; | 
|  | break; | 
|  | case 192000: | 
|  | emu_samplerate_id = EMU_QUIRK_SR_192000HZ; | 
|  | break; | 
|  | default: | 
|  | emu_samplerate_id = EMU_QUIRK_SR_44100HZ; | 
|  | break; | 
|  | } | 
|  | snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id); | 
|  | } | 
|  |  | 
|  | void snd_usb_set_format_quirk(struct snd_usb_substream *subs, | 
|  | struct audioformat *fmt) | 
|  | { | 
|  | switch (subs->stream->chip->usb_id) { | 
|  | case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */ | 
|  | case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */ | 
|  | case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */ | 
|  | case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */ | 
|  | set_format_emu_quirk(subs, fmt); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  |