|  | /******************************************************************************* | 
|  |  | 
|  | Intel(R) 82576 Virtual Function Linux driver | 
|  | Copyright(c) 2009 - 2010 Intel Corporation. | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify it | 
|  | under the terms and conditions of the GNU General Public License, | 
|  | version 2, as published by the Free Software Foundation. | 
|  |  | 
|  | This program is distributed in the hope it will be useful, but WITHOUT | 
|  | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License along with | 
|  | this program; if not, write to the Free Software Foundation, Inc., | 
|  | 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | 
|  |  | 
|  | The full GNU General Public License is included in this distribution in | 
|  | the file called "COPYING". | 
|  |  | 
|  | Contact Information: | 
|  | e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | 
|  | Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  |  | 
|  | *******************************************************************************/ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/vmalloc.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/tcp.h> | 
|  | #include <linux/ipv6.h> | 
|  | #include <linux/slab.h> | 
|  | #include <net/checksum.h> | 
|  | #include <net/ip6_checksum.h> | 
|  | #include <linux/mii.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <linux/if_vlan.h> | 
|  | #include <linux/prefetch.h> | 
|  |  | 
|  | #include "igbvf.h" | 
|  |  | 
|  | #define DRV_VERSION "1.0.8-k0" | 
|  | char igbvf_driver_name[] = "igbvf"; | 
|  | const char igbvf_driver_version[] = DRV_VERSION; | 
|  | static const char igbvf_driver_string[] = | 
|  | "Intel(R) Virtual Function Network Driver"; | 
|  | static const char igbvf_copyright[] = | 
|  | "Copyright (c) 2009 - 2010 Intel Corporation."; | 
|  |  | 
|  | static int igbvf_poll(struct napi_struct *napi, int budget); | 
|  | static void igbvf_reset(struct igbvf_adapter *); | 
|  | static void igbvf_set_interrupt_capability(struct igbvf_adapter *); | 
|  | static void igbvf_reset_interrupt_capability(struct igbvf_adapter *); | 
|  |  | 
|  | static struct igbvf_info igbvf_vf_info = { | 
|  | .mac                    = e1000_vfadapt, | 
|  | .flags                  = 0, | 
|  | .pba                    = 10, | 
|  | .init_ops               = e1000_init_function_pointers_vf, | 
|  | }; | 
|  |  | 
|  | static struct igbvf_info igbvf_i350_vf_info = { | 
|  | .mac			= e1000_vfadapt_i350, | 
|  | .flags			= 0, | 
|  | .pba			= 10, | 
|  | .init_ops		= e1000_init_function_pointers_vf, | 
|  | }; | 
|  |  | 
|  | static const struct igbvf_info *igbvf_info_tbl[] = { | 
|  | [board_vf]              = &igbvf_vf_info, | 
|  | [board_i350_vf]		= &igbvf_i350_vf_info, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * igbvf_desc_unused - calculate if we have unused descriptors | 
|  | **/ | 
|  | static int igbvf_desc_unused(struct igbvf_ring *ring) | 
|  | { | 
|  | if (ring->next_to_clean > ring->next_to_use) | 
|  | return ring->next_to_clean - ring->next_to_use - 1; | 
|  |  | 
|  | return ring->count + ring->next_to_clean - ring->next_to_use - 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_receive_skb - helper function to handle Rx indications | 
|  | * @adapter: board private structure | 
|  | * @status: descriptor status field as written by hardware | 
|  | * @vlan: descriptor vlan field as written by hardware (no le/be conversion) | 
|  | * @skb: pointer to sk_buff to be indicated to stack | 
|  | **/ | 
|  | static void igbvf_receive_skb(struct igbvf_adapter *adapter, | 
|  | struct net_device *netdev, | 
|  | struct sk_buff *skb, | 
|  | u32 status, u16 vlan) | 
|  | { | 
|  | if (adapter->vlgrp && (status & E1000_RXD_STAT_VP)) | 
|  | vlan_hwaccel_receive_skb(skb, adapter->vlgrp, | 
|  | le16_to_cpu(vlan) & | 
|  | E1000_RXD_SPC_VLAN_MASK); | 
|  | else | 
|  | netif_receive_skb(skb); | 
|  | } | 
|  |  | 
|  | static inline void igbvf_rx_checksum_adv(struct igbvf_adapter *adapter, | 
|  | u32 status_err, struct sk_buff *skb) | 
|  | { | 
|  | skb_checksum_none_assert(skb); | 
|  |  | 
|  | /* Ignore Checksum bit is set or checksum is disabled through ethtool */ | 
|  | if ((status_err & E1000_RXD_STAT_IXSM) || | 
|  | (adapter->flags & IGBVF_FLAG_RX_CSUM_DISABLED)) | 
|  | return; | 
|  |  | 
|  | /* TCP/UDP checksum error bit is set */ | 
|  | if (status_err & | 
|  | (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) { | 
|  | /* let the stack verify checksum errors */ | 
|  | adapter->hw_csum_err++; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* It must be a TCP or UDP packet with a valid checksum */ | 
|  | if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)) | 
|  | skb->ip_summed = CHECKSUM_UNNECESSARY; | 
|  |  | 
|  | adapter->hw_csum_good++; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_alloc_rx_buffers - Replace used receive buffers; packet split | 
|  | * @rx_ring: address of ring structure to repopulate | 
|  | * @cleaned_count: number of buffers to repopulate | 
|  | **/ | 
|  | static void igbvf_alloc_rx_buffers(struct igbvf_ring *rx_ring, | 
|  | int cleaned_count) | 
|  | { | 
|  | struct igbvf_adapter *adapter = rx_ring->adapter; | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | union e1000_adv_rx_desc *rx_desc; | 
|  | struct igbvf_buffer *buffer_info; | 
|  | struct sk_buff *skb; | 
|  | unsigned int i; | 
|  | int bufsz; | 
|  |  | 
|  | i = rx_ring->next_to_use; | 
|  | buffer_info = &rx_ring->buffer_info[i]; | 
|  |  | 
|  | if (adapter->rx_ps_hdr_size) | 
|  | bufsz = adapter->rx_ps_hdr_size; | 
|  | else | 
|  | bufsz = adapter->rx_buffer_len; | 
|  |  | 
|  | while (cleaned_count--) { | 
|  | rx_desc = IGBVF_RX_DESC_ADV(*rx_ring, i); | 
|  |  | 
|  | if (adapter->rx_ps_hdr_size && !buffer_info->page_dma) { | 
|  | if (!buffer_info->page) { | 
|  | buffer_info->page = alloc_page(GFP_ATOMIC); | 
|  | if (!buffer_info->page) { | 
|  | adapter->alloc_rx_buff_failed++; | 
|  | goto no_buffers; | 
|  | } | 
|  | buffer_info->page_offset = 0; | 
|  | } else { | 
|  | buffer_info->page_offset ^= PAGE_SIZE / 2; | 
|  | } | 
|  | buffer_info->page_dma = | 
|  | dma_map_page(&pdev->dev, buffer_info->page, | 
|  | buffer_info->page_offset, | 
|  | PAGE_SIZE / 2, | 
|  | DMA_FROM_DEVICE); | 
|  | } | 
|  |  | 
|  | if (!buffer_info->skb) { | 
|  | skb = netdev_alloc_skb_ip_align(netdev, bufsz); | 
|  | if (!skb) { | 
|  | adapter->alloc_rx_buff_failed++; | 
|  | goto no_buffers; | 
|  | } | 
|  |  | 
|  | buffer_info->skb = skb; | 
|  | buffer_info->dma = dma_map_single(&pdev->dev, skb->data, | 
|  | bufsz, | 
|  | DMA_FROM_DEVICE); | 
|  | } | 
|  | /* Refresh the desc even if buffer_addrs didn't change because | 
|  | * each write-back erases this info. */ | 
|  | if (adapter->rx_ps_hdr_size) { | 
|  | rx_desc->read.pkt_addr = | 
|  | cpu_to_le64(buffer_info->page_dma); | 
|  | rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma); | 
|  | } else { | 
|  | rx_desc->read.pkt_addr = | 
|  | cpu_to_le64(buffer_info->dma); | 
|  | rx_desc->read.hdr_addr = 0; | 
|  | } | 
|  |  | 
|  | i++; | 
|  | if (i == rx_ring->count) | 
|  | i = 0; | 
|  | buffer_info = &rx_ring->buffer_info[i]; | 
|  | } | 
|  |  | 
|  | no_buffers: | 
|  | if (rx_ring->next_to_use != i) { | 
|  | rx_ring->next_to_use = i; | 
|  | if (i == 0) | 
|  | i = (rx_ring->count - 1); | 
|  | else | 
|  | i--; | 
|  |  | 
|  | /* Force memory writes to complete before letting h/w | 
|  | * know there are new descriptors to fetch.  (Only | 
|  | * applicable for weak-ordered memory model archs, | 
|  | * such as IA-64). */ | 
|  | wmb(); | 
|  | writel(i, adapter->hw.hw_addr + rx_ring->tail); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_clean_rx_irq - Send received data up the network stack; legacy | 
|  | * @adapter: board private structure | 
|  | * | 
|  | * the return value indicates whether actual cleaning was done, there | 
|  | * is no guarantee that everything was cleaned | 
|  | **/ | 
|  | static bool igbvf_clean_rx_irq(struct igbvf_adapter *adapter, | 
|  | int *work_done, int work_to_do) | 
|  | { | 
|  | struct igbvf_ring *rx_ring = adapter->rx_ring; | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | union e1000_adv_rx_desc *rx_desc, *next_rxd; | 
|  | struct igbvf_buffer *buffer_info, *next_buffer; | 
|  | struct sk_buff *skb; | 
|  | bool cleaned = false; | 
|  | int cleaned_count = 0; | 
|  | unsigned int total_bytes = 0, total_packets = 0; | 
|  | unsigned int i; | 
|  | u32 length, hlen, staterr; | 
|  |  | 
|  | i = rx_ring->next_to_clean; | 
|  | rx_desc = IGBVF_RX_DESC_ADV(*rx_ring, i); | 
|  | staterr = le32_to_cpu(rx_desc->wb.upper.status_error); | 
|  |  | 
|  | while (staterr & E1000_RXD_STAT_DD) { | 
|  | if (*work_done >= work_to_do) | 
|  | break; | 
|  | (*work_done)++; | 
|  | rmb(); /* read descriptor and rx_buffer_info after status DD */ | 
|  |  | 
|  | buffer_info = &rx_ring->buffer_info[i]; | 
|  |  | 
|  | /* HW will not DMA in data larger than the given buffer, even | 
|  | * if it parses the (NFS, of course) header to be larger.  In | 
|  | * that case, it fills the header buffer and spills the rest | 
|  | * into the page. | 
|  | */ | 
|  | hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.hdr_info) & | 
|  | E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT; | 
|  | if (hlen > adapter->rx_ps_hdr_size) | 
|  | hlen = adapter->rx_ps_hdr_size; | 
|  |  | 
|  | length = le16_to_cpu(rx_desc->wb.upper.length); | 
|  | cleaned = true; | 
|  | cleaned_count++; | 
|  |  | 
|  | skb = buffer_info->skb; | 
|  | prefetch(skb->data - NET_IP_ALIGN); | 
|  | buffer_info->skb = NULL; | 
|  | if (!adapter->rx_ps_hdr_size) { | 
|  | dma_unmap_single(&pdev->dev, buffer_info->dma, | 
|  | adapter->rx_buffer_len, | 
|  | DMA_FROM_DEVICE); | 
|  | buffer_info->dma = 0; | 
|  | skb_put(skb, length); | 
|  | goto send_up; | 
|  | } | 
|  |  | 
|  | if (!skb_shinfo(skb)->nr_frags) { | 
|  | dma_unmap_single(&pdev->dev, buffer_info->dma, | 
|  | adapter->rx_ps_hdr_size, | 
|  | DMA_FROM_DEVICE); | 
|  | skb_put(skb, hlen); | 
|  | } | 
|  |  | 
|  | if (length) { | 
|  | dma_unmap_page(&pdev->dev, buffer_info->page_dma, | 
|  | PAGE_SIZE / 2, | 
|  | DMA_FROM_DEVICE); | 
|  | buffer_info->page_dma = 0; | 
|  |  | 
|  | skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, | 
|  | buffer_info->page, | 
|  | buffer_info->page_offset, | 
|  | length); | 
|  |  | 
|  | if ((adapter->rx_buffer_len > (PAGE_SIZE / 2)) || | 
|  | (page_count(buffer_info->page) != 1)) | 
|  | buffer_info->page = NULL; | 
|  | else | 
|  | get_page(buffer_info->page); | 
|  |  | 
|  | skb->len += length; | 
|  | skb->data_len += length; | 
|  | skb->truesize += length; | 
|  | } | 
|  | send_up: | 
|  | i++; | 
|  | if (i == rx_ring->count) | 
|  | i = 0; | 
|  | next_rxd = IGBVF_RX_DESC_ADV(*rx_ring, i); | 
|  | prefetch(next_rxd); | 
|  | next_buffer = &rx_ring->buffer_info[i]; | 
|  |  | 
|  | if (!(staterr & E1000_RXD_STAT_EOP)) { | 
|  | buffer_info->skb = next_buffer->skb; | 
|  | buffer_info->dma = next_buffer->dma; | 
|  | next_buffer->skb = skb; | 
|  | next_buffer->dma = 0; | 
|  | goto next_desc; | 
|  | } | 
|  |  | 
|  | if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) { | 
|  | dev_kfree_skb_irq(skb); | 
|  | goto next_desc; | 
|  | } | 
|  |  | 
|  | total_bytes += skb->len; | 
|  | total_packets++; | 
|  |  | 
|  | igbvf_rx_checksum_adv(adapter, staterr, skb); | 
|  |  | 
|  | skb->protocol = eth_type_trans(skb, netdev); | 
|  |  | 
|  | igbvf_receive_skb(adapter, netdev, skb, staterr, | 
|  | rx_desc->wb.upper.vlan); | 
|  |  | 
|  | next_desc: | 
|  | rx_desc->wb.upper.status_error = 0; | 
|  |  | 
|  | /* return some buffers to hardware, one at a time is too slow */ | 
|  | if (cleaned_count >= IGBVF_RX_BUFFER_WRITE) { | 
|  | igbvf_alloc_rx_buffers(rx_ring, cleaned_count); | 
|  | cleaned_count = 0; | 
|  | } | 
|  |  | 
|  | /* use prefetched values */ | 
|  | rx_desc = next_rxd; | 
|  | buffer_info = next_buffer; | 
|  |  | 
|  | staterr = le32_to_cpu(rx_desc->wb.upper.status_error); | 
|  | } | 
|  |  | 
|  | rx_ring->next_to_clean = i; | 
|  | cleaned_count = igbvf_desc_unused(rx_ring); | 
|  |  | 
|  | if (cleaned_count) | 
|  | igbvf_alloc_rx_buffers(rx_ring, cleaned_count); | 
|  |  | 
|  | adapter->total_rx_packets += total_packets; | 
|  | adapter->total_rx_bytes += total_bytes; | 
|  | adapter->net_stats.rx_bytes += total_bytes; | 
|  | adapter->net_stats.rx_packets += total_packets; | 
|  | return cleaned; | 
|  | } | 
|  |  | 
|  | static void igbvf_put_txbuf(struct igbvf_adapter *adapter, | 
|  | struct igbvf_buffer *buffer_info) | 
|  | { | 
|  | if (buffer_info->dma) { | 
|  | if (buffer_info->mapped_as_page) | 
|  | dma_unmap_page(&adapter->pdev->dev, | 
|  | buffer_info->dma, | 
|  | buffer_info->length, | 
|  | DMA_TO_DEVICE); | 
|  | else | 
|  | dma_unmap_single(&adapter->pdev->dev, | 
|  | buffer_info->dma, | 
|  | buffer_info->length, | 
|  | DMA_TO_DEVICE); | 
|  | buffer_info->dma = 0; | 
|  | } | 
|  | if (buffer_info->skb) { | 
|  | dev_kfree_skb_any(buffer_info->skb); | 
|  | buffer_info->skb = NULL; | 
|  | } | 
|  | buffer_info->time_stamp = 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_setup_tx_resources - allocate Tx resources (Descriptors) | 
|  | * @adapter: board private structure | 
|  | * | 
|  | * Return 0 on success, negative on failure | 
|  | **/ | 
|  | int igbvf_setup_tx_resources(struct igbvf_adapter *adapter, | 
|  | struct igbvf_ring *tx_ring) | 
|  | { | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | int size; | 
|  |  | 
|  | size = sizeof(struct igbvf_buffer) * tx_ring->count; | 
|  | tx_ring->buffer_info = vzalloc(size); | 
|  | if (!tx_ring->buffer_info) | 
|  | goto err; | 
|  |  | 
|  | /* round up to nearest 4K */ | 
|  | tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc); | 
|  | tx_ring->size = ALIGN(tx_ring->size, 4096); | 
|  |  | 
|  | tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size, | 
|  | &tx_ring->dma, GFP_KERNEL); | 
|  |  | 
|  | if (!tx_ring->desc) | 
|  | goto err; | 
|  |  | 
|  | tx_ring->adapter = adapter; | 
|  | tx_ring->next_to_use = 0; | 
|  | tx_ring->next_to_clean = 0; | 
|  |  | 
|  | return 0; | 
|  | err: | 
|  | vfree(tx_ring->buffer_info); | 
|  | dev_err(&adapter->pdev->dev, | 
|  | "Unable to allocate memory for the transmit descriptor ring\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_setup_rx_resources - allocate Rx resources (Descriptors) | 
|  | * @adapter: board private structure | 
|  | * | 
|  | * Returns 0 on success, negative on failure | 
|  | **/ | 
|  | int igbvf_setup_rx_resources(struct igbvf_adapter *adapter, | 
|  | struct igbvf_ring *rx_ring) | 
|  | { | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | int size, desc_len; | 
|  |  | 
|  | size = sizeof(struct igbvf_buffer) * rx_ring->count; | 
|  | rx_ring->buffer_info = vzalloc(size); | 
|  | if (!rx_ring->buffer_info) | 
|  | goto err; | 
|  |  | 
|  | desc_len = sizeof(union e1000_adv_rx_desc); | 
|  |  | 
|  | /* Round up to nearest 4K */ | 
|  | rx_ring->size = rx_ring->count * desc_len; | 
|  | rx_ring->size = ALIGN(rx_ring->size, 4096); | 
|  |  | 
|  | rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size, | 
|  | &rx_ring->dma, GFP_KERNEL); | 
|  |  | 
|  | if (!rx_ring->desc) | 
|  | goto err; | 
|  |  | 
|  | rx_ring->next_to_clean = 0; | 
|  | rx_ring->next_to_use = 0; | 
|  |  | 
|  | rx_ring->adapter = adapter; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | vfree(rx_ring->buffer_info); | 
|  | rx_ring->buffer_info = NULL; | 
|  | dev_err(&adapter->pdev->dev, | 
|  | "Unable to allocate memory for the receive descriptor ring\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_clean_tx_ring - Free Tx Buffers | 
|  | * @tx_ring: ring to be cleaned | 
|  | **/ | 
|  | static void igbvf_clean_tx_ring(struct igbvf_ring *tx_ring) | 
|  | { | 
|  | struct igbvf_adapter *adapter = tx_ring->adapter; | 
|  | struct igbvf_buffer *buffer_info; | 
|  | unsigned long size; | 
|  | unsigned int i; | 
|  |  | 
|  | if (!tx_ring->buffer_info) | 
|  | return; | 
|  |  | 
|  | /* Free all the Tx ring sk_buffs */ | 
|  | for (i = 0; i < tx_ring->count; i++) { | 
|  | buffer_info = &tx_ring->buffer_info[i]; | 
|  | igbvf_put_txbuf(adapter, buffer_info); | 
|  | } | 
|  |  | 
|  | size = sizeof(struct igbvf_buffer) * tx_ring->count; | 
|  | memset(tx_ring->buffer_info, 0, size); | 
|  |  | 
|  | /* Zero out the descriptor ring */ | 
|  | memset(tx_ring->desc, 0, tx_ring->size); | 
|  |  | 
|  | tx_ring->next_to_use = 0; | 
|  | tx_ring->next_to_clean = 0; | 
|  |  | 
|  | writel(0, adapter->hw.hw_addr + tx_ring->head); | 
|  | writel(0, adapter->hw.hw_addr + tx_ring->tail); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_free_tx_resources - Free Tx Resources per Queue | 
|  | * @tx_ring: ring to free resources from | 
|  | * | 
|  | * Free all transmit software resources | 
|  | **/ | 
|  | void igbvf_free_tx_resources(struct igbvf_ring *tx_ring) | 
|  | { | 
|  | struct pci_dev *pdev = tx_ring->adapter->pdev; | 
|  |  | 
|  | igbvf_clean_tx_ring(tx_ring); | 
|  |  | 
|  | vfree(tx_ring->buffer_info); | 
|  | tx_ring->buffer_info = NULL; | 
|  |  | 
|  | dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc, | 
|  | tx_ring->dma); | 
|  |  | 
|  | tx_ring->desc = NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_clean_rx_ring - Free Rx Buffers per Queue | 
|  | * @adapter: board private structure | 
|  | **/ | 
|  | static void igbvf_clean_rx_ring(struct igbvf_ring *rx_ring) | 
|  | { | 
|  | struct igbvf_adapter *adapter = rx_ring->adapter; | 
|  | struct igbvf_buffer *buffer_info; | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | unsigned long size; | 
|  | unsigned int i; | 
|  |  | 
|  | if (!rx_ring->buffer_info) | 
|  | return; | 
|  |  | 
|  | /* Free all the Rx ring sk_buffs */ | 
|  | for (i = 0; i < rx_ring->count; i++) { | 
|  | buffer_info = &rx_ring->buffer_info[i]; | 
|  | if (buffer_info->dma) { | 
|  | if (adapter->rx_ps_hdr_size){ | 
|  | dma_unmap_single(&pdev->dev, buffer_info->dma, | 
|  | adapter->rx_ps_hdr_size, | 
|  | DMA_FROM_DEVICE); | 
|  | } else { | 
|  | dma_unmap_single(&pdev->dev, buffer_info->dma, | 
|  | adapter->rx_buffer_len, | 
|  | DMA_FROM_DEVICE); | 
|  | } | 
|  | buffer_info->dma = 0; | 
|  | } | 
|  |  | 
|  | if (buffer_info->skb) { | 
|  | dev_kfree_skb(buffer_info->skb); | 
|  | buffer_info->skb = NULL; | 
|  | } | 
|  |  | 
|  | if (buffer_info->page) { | 
|  | if (buffer_info->page_dma) | 
|  | dma_unmap_page(&pdev->dev, | 
|  | buffer_info->page_dma, | 
|  | PAGE_SIZE / 2, | 
|  | DMA_FROM_DEVICE); | 
|  | put_page(buffer_info->page); | 
|  | buffer_info->page = NULL; | 
|  | buffer_info->page_dma = 0; | 
|  | buffer_info->page_offset = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | size = sizeof(struct igbvf_buffer) * rx_ring->count; | 
|  | memset(rx_ring->buffer_info, 0, size); | 
|  |  | 
|  | /* Zero out the descriptor ring */ | 
|  | memset(rx_ring->desc, 0, rx_ring->size); | 
|  |  | 
|  | rx_ring->next_to_clean = 0; | 
|  | rx_ring->next_to_use = 0; | 
|  |  | 
|  | writel(0, adapter->hw.hw_addr + rx_ring->head); | 
|  | writel(0, adapter->hw.hw_addr + rx_ring->tail); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_free_rx_resources - Free Rx Resources | 
|  | * @rx_ring: ring to clean the resources from | 
|  | * | 
|  | * Free all receive software resources | 
|  | **/ | 
|  |  | 
|  | void igbvf_free_rx_resources(struct igbvf_ring *rx_ring) | 
|  | { | 
|  | struct pci_dev *pdev = rx_ring->adapter->pdev; | 
|  |  | 
|  | igbvf_clean_rx_ring(rx_ring); | 
|  |  | 
|  | vfree(rx_ring->buffer_info); | 
|  | rx_ring->buffer_info = NULL; | 
|  |  | 
|  | dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc, | 
|  | rx_ring->dma); | 
|  | rx_ring->desc = NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_update_itr - update the dynamic ITR value based on statistics | 
|  | * @adapter: pointer to adapter | 
|  | * @itr_setting: current adapter->itr | 
|  | * @packets: the number of packets during this measurement interval | 
|  | * @bytes: the number of bytes during this measurement interval | 
|  | * | 
|  | *      Stores a new ITR value based on packets and byte | 
|  | *      counts during the last interrupt.  The advantage of per interrupt | 
|  | *      computation is faster updates and more accurate ITR for the current | 
|  | *      traffic pattern.  Constants in this function were computed | 
|  | *      based on theoretical maximum wire speed and thresholds were set based | 
|  | *      on testing data as well as attempting to minimize response time | 
|  | *      while increasing bulk throughput.  This functionality is controlled | 
|  | *      by the InterruptThrottleRate module parameter. | 
|  | **/ | 
|  | static unsigned int igbvf_update_itr(struct igbvf_adapter *adapter, | 
|  | u16 itr_setting, int packets, | 
|  | int bytes) | 
|  | { | 
|  | unsigned int retval = itr_setting; | 
|  |  | 
|  | if (packets == 0) | 
|  | goto update_itr_done; | 
|  |  | 
|  | switch (itr_setting) { | 
|  | case lowest_latency: | 
|  | /* handle TSO and jumbo frames */ | 
|  | if (bytes/packets > 8000) | 
|  | retval = bulk_latency; | 
|  | else if ((packets < 5) && (bytes > 512)) | 
|  | retval = low_latency; | 
|  | break; | 
|  | case low_latency:  /* 50 usec aka 20000 ints/s */ | 
|  | if (bytes > 10000) { | 
|  | /* this if handles the TSO accounting */ | 
|  | if (bytes/packets > 8000) | 
|  | retval = bulk_latency; | 
|  | else if ((packets < 10) || ((bytes/packets) > 1200)) | 
|  | retval = bulk_latency; | 
|  | else if ((packets > 35)) | 
|  | retval = lowest_latency; | 
|  | } else if (bytes/packets > 2000) { | 
|  | retval = bulk_latency; | 
|  | } else if (packets <= 2 && bytes < 512) { | 
|  | retval = lowest_latency; | 
|  | } | 
|  | break; | 
|  | case bulk_latency: /* 250 usec aka 4000 ints/s */ | 
|  | if (bytes > 25000) { | 
|  | if (packets > 35) | 
|  | retval = low_latency; | 
|  | } else if (bytes < 6000) { | 
|  | retval = low_latency; | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | update_itr_done: | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void igbvf_set_itr(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | u16 current_itr; | 
|  | u32 new_itr = adapter->itr; | 
|  |  | 
|  | adapter->tx_itr = igbvf_update_itr(adapter, adapter->tx_itr, | 
|  | adapter->total_tx_packets, | 
|  | adapter->total_tx_bytes); | 
|  | /* conservative mode (itr 3) eliminates the lowest_latency setting */ | 
|  | if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency) | 
|  | adapter->tx_itr = low_latency; | 
|  |  | 
|  | adapter->rx_itr = igbvf_update_itr(adapter, adapter->rx_itr, | 
|  | adapter->total_rx_packets, | 
|  | adapter->total_rx_bytes); | 
|  | /* conservative mode (itr 3) eliminates the lowest_latency setting */ | 
|  | if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) | 
|  | adapter->rx_itr = low_latency; | 
|  |  | 
|  | current_itr = max(adapter->rx_itr, adapter->tx_itr); | 
|  |  | 
|  | switch (current_itr) { | 
|  | /* counts and packets in update_itr are dependent on these numbers */ | 
|  | case lowest_latency: | 
|  | new_itr = 70000; | 
|  | break; | 
|  | case low_latency: | 
|  | new_itr = 20000; /* aka hwitr = ~200 */ | 
|  | break; | 
|  | case bulk_latency: | 
|  | new_itr = 4000; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (new_itr != adapter->itr) { | 
|  | /* | 
|  | * this attempts to bias the interrupt rate towards Bulk | 
|  | * by adding intermediate steps when interrupt rate is | 
|  | * increasing | 
|  | */ | 
|  | new_itr = new_itr > adapter->itr ? | 
|  | min(adapter->itr + (new_itr >> 2), new_itr) : | 
|  | new_itr; | 
|  | adapter->itr = new_itr; | 
|  | adapter->rx_ring->itr_val = 1952; | 
|  |  | 
|  | if (adapter->msix_entries) | 
|  | adapter->rx_ring->set_itr = 1; | 
|  | else | 
|  | ew32(ITR, 1952); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_clean_tx_irq - Reclaim resources after transmit completes | 
|  | * @adapter: board private structure | 
|  | * returns true if ring is completely cleaned | 
|  | **/ | 
|  | static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring) | 
|  | { | 
|  | struct igbvf_adapter *adapter = tx_ring->adapter; | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | struct igbvf_buffer *buffer_info; | 
|  | struct sk_buff *skb; | 
|  | union e1000_adv_tx_desc *tx_desc, *eop_desc; | 
|  | unsigned int total_bytes = 0, total_packets = 0; | 
|  | unsigned int i, eop, count = 0; | 
|  | bool cleaned = false; | 
|  |  | 
|  | i = tx_ring->next_to_clean; | 
|  | eop = tx_ring->buffer_info[i].next_to_watch; | 
|  | eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop); | 
|  |  | 
|  | while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) && | 
|  | (count < tx_ring->count)) { | 
|  | rmb();	/* read buffer_info after eop_desc status */ | 
|  | for (cleaned = false; !cleaned; count++) { | 
|  | tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i); | 
|  | buffer_info = &tx_ring->buffer_info[i]; | 
|  | cleaned = (i == eop); | 
|  | skb = buffer_info->skb; | 
|  |  | 
|  | if (skb) { | 
|  | unsigned int segs, bytecount; | 
|  |  | 
|  | /* gso_segs is currently only valid for tcp */ | 
|  | segs = skb_shinfo(skb)->gso_segs ?: 1; | 
|  | /* multiply data chunks by size of headers */ | 
|  | bytecount = ((segs - 1) * skb_headlen(skb)) + | 
|  | skb->len; | 
|  | total_packets += segs; | 
|  | total_bytes += bytecount; | 
|  | } | 
|  |  | 
|  | igbvf_put_txbuf(adapter, buffer_info); | 
|  | tx_desc->wb.status = 0; | 
|  |  | 
|  | i++; | 
|  | if (i == tx_ring->count) | 
|  | i = 0; | 
|  | } | 
|  | eop = tx_ring->buffer_info[i].next_to_watch; | 
|  | eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop); | 
|  | } | 
|  |  | 
|  | tx_ring->next_to_clean = i; | 
|  |  | 
|  | if (unlikely(count && | 
|  | netif_carrier_ok(netdev) && | 
|  | igbvf_desc_unused(tx_ring) >= IGBVF_TX_QUEUE_WAKE)) { | 
|  | /* Make sure that anybody stopping the queue after this | 
|  | * sees the new next_to_clean. | 
|  | */ | 
|  | smp_mb(); | 
|  | if (netif_queue_stopped(netdev) && | 
|  | !(test_bit(__IGBVF_DOWN, &adapter->state))) { | 
|  | netif_wake_queue(netdev); | 
|  | ++adapter->restart_queue; | 
|  | } | 
|  | } | 
|  |  | 
|  | adapter->net_stats.tx_bytes += total_bytes; | 
|  | adapter->net_stats.tx_packets += total_packets; | 
|  | return count < tx_ring->count; | 
|  | } | 
|  |  | 
|  | static irqreturn_t igbvf_msix_other(int irq, void *data) | 
|  | { | 
|  | struct net_device *netdev = data; | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  |  | 
|  | adapter->int_counter1++; | 
|  |  | 
|  | netif_carrier_off(netdev); | 
|  | hw->mac.get_link_status = 1; | 
|  | if (!test_bit(__IGBVF_DOWN, &adapter->state)) | 
|  | mod_timer(&adapter->watchdog_timer, jiffies + 1); | 
|  |  | 
|  | ew32(EIMS, adapter->eims_other); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static irqreturn_t igbvf_intr_msix_tx(int irq, void *data) | 
|  | { | 
|  | struct net_device *netdev = data; | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | struct igbvf_ring *tx_ring = adapter->tx_ring; | 
|  |  | 
|  |  | 
|  | adapter->total_tx_bytes = 0; | 
|  | adapter->total_tx_packets = 0; | 
|  |  | 
|  | /* auto mask will automatically reenable the interrupt when we write | 
|  | * EICS */ | 
|  | if (!igbvf_clean_tx_irq(tx_ring)) | 
|  | /* Ring was not completely cleaned, so fire another interrupt */ | 
|  | ew32(EICS, tx_ring->eims_value); | 
|  | else | 
|  | ew32(EIMS, tx_ring->eims_value); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static irqreturn_t igbvf_intr_msix_rx(int irq, void *data) | 
|  | { | 
|  | struct net_device *netdev = data; | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | adapter->int_counter0++; | 
|  |  | 
|  | /* Write the ITR value calculated at the end of the | 
|  | * previous interrupt. | 
|  | */ | 
|  | if (adapter->rx_ring->set_itr) { | 
|  | writel(adapter->rx_ring->itr_val, | 
|  | adapter->hw.hw_addr + adapter->rx_ring->itr_register); | 
|  | adapter->rx_ring->set_itr = 0; | 
|  | } | 
|  |  | 
|  | if (napi_schedule_prep(&adapter->rx_ring->napi)) { | 
|  | adapter->total_rx_bytes = 0; | 
|  | adapter->total_rx_packets = 0; | 
|  | __napi_schedule(&adapter->rx_ring->napi); | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | #define IGBVF_NO_QUEUE -1 | 
|  |  | 
|  | static void igbvf_assign_vector(struct igbvf_adapter *adapter, int rx_queue, | 
|  | int tx_queue, int msix_vector) | 
|  | { | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | u32 ivar, index; | 
|  |  | 
|  | /* 82576 uses a table-based method for assigning vectors. | 
|  | Each queue has a single entry in the table to which we write | 
|  | a vector number along with a "valid" bit.  Sadly, the layout | 
|  | of the table is somewhat counterintuitive. */ | 
|  | if (rx_queue > IGBVF_NO_QUEUE) { | 
|  | index = (rx_queue >> 1); | 
|  | ivar = array_er32(IVAR0, index); | 
|  | if (rx_queue & 0x1) { | 
|  | /* vector goes into third byte of register */ | 
|  | ivar = ivar & 0xFF00FFFF; | 
|  | ivar |= (msix_vector | E1000_IVAR_VALID) << 16; | 
|  | } else { | 
|  | /* vector goes into low byte of register */ | 
|  | ivar = ivar & 0xFFFFFF00; | 
|  | ivar |= msix_vector | E1000_IVAR_VALID; | 
|  | } | 
|  | adapter->rx_ring[rx_queue].eims_value = 1 << msix_vector; | 
|  | array_ew32(IVAR0, index, ivar); | 
|  | } | 
|  | if (tx_queue > IGBVF_NO_QUEUE) { | 
|  | index = (tx_queue >> 1); | 
|  | ivar = array_er32(IVAR0, index); | 
|  | if (tx_queue & 0x1) { | 
|  | /* vector goes into high byte of register */ | 
|  | ivar = ivar & 0x00FFFFFF; | 
|  | ivar |= (msix_vector | E1000_IVAR_VALID) << 24; | 
|  | } else { | 
|  | /* vector goes into second byte of register */ | 
|  | ivar = ivar & 0xFFFF00FF; | 
|  | ivar |= (msix_vector | E1000_IVAR_VALID) << 8; | 
|  | } | 
|  | adapter->tx_ring[tx_queue].eims_value = 1 << msix_vector; | 
|  | array_ew32(IVAR0, index, ivar); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_configure_msix - Configure MSI-X hardware | 
|  | * | 
|  | * igbvf_configure_msix sets up the hardware to properly | 
|  | * generate MSI-X interrupts. | 
|  | **/ | 
|  | static void igbvf_configure_msix(struct igbvf_adapter *adapter) | 
|  | { | 
|  | u32 tmp; | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | struct igbvf_ring *tx_ring = adapter->tx_ring; | 
|  | struct igbvf_ring *rx_ring = adapter->rx_ring; | 
|  | int vector = 0; | 
|  |  | 
|  | adapter->eims_enable_mask = 0; | 
|  |  | 
|  | igbvf_assign_vector(adapter, IGBVF_NO_QUEUE, 0, vector++); | 
|  | adapter->eims_enable_mask |= tx_ring->eims_value; | 
|  | if (tx_ring->itr_val) | 
|  | writel(tx_ring->itr_val, | 
|  | hw->hw_addr + tx_ring->itr_register); | 
|  | else | 
|  | writel(1952, hw->hw_addr + tx_ring->itr_register); | 
|  |  | 
|  | igbvf_assign_vector(adapter, 0, IGBVF_NO_QUEUE, vector++); | 
|  | adapter->eims_enable_mask |= rx_ring->eims_value; | 
|  | if (rx_ring->itr_val) | 
|  | writel(rx_ring->itr_val, | 
|  | hw->hw_addr + rx_ring->itr_register); | 
|  | else | 
|  | writel(1952, hw->hw_addr + rx_ring->itr_register); | 
|  |  | 
|  | /* set vector for other causes, i.e. link changes */ | 
|  |  | 
|  | tmp = (vector++ | E1000_IVAR_VALID); | 
|  |  | 
|  | ew32(IVAR_MISC, tmp); | 
|  |  | 
|  | adapter->eims_enable_mask = (1 << (vector)) - 1; | 
|  | adapter->eims_other = 1 << (vector - 1); | 
|  | e1e_flush(); | 
|  | } | 
|  |  | 
|  | static void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter) | 
|  | { | 
|  | if (adapter->msix_entries) { | 
|  | pci_disable_msix(adapter->pdev); | 
|  | kfree(adapter->msix_entries); | 
|  | adapter->msix_entries = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_set_interrupt_capability - set MSI or MSI-X if supported | 
|  | * | 
|  | * Attempt to configure interrupts using the best available | 
|  | * capabilities of the hardware and kernel. | 
|  | **/ | 
|  | static void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter) | 
|  | { | 
|  | int err = -ENOMEM; | 
|  | int i; | 
|  |  | 
|  | /* we allocate 3 vectors, 1 for tx, 1 for rx, one for pf messages */ | 
|  | adapter->msix_entries = kcalloc(3, sizeof(struct msix_entry), | 
|  | GFP_KERNEL); | 
|  | if (adapter->msix_entries) { | 
|  | for (i = 0; i < 3; i++) | 
|  | adapter->msix_entries[i].entry = i; | 
|  |  | 
|  | err = pci_enable_msix(adapter->pdev, | 
|  | adapter->msix_entries, 3); | 
|  | } | 
|  |  | 
|  | if (err) { | 
|  | /* MSI-X failed */ | 
|  | dev_err(&adapter->pdev->dev, | 
|  | "Failed to initialize MSI-X interrupts.\n"); | 
|  | igbvf_reset_interrupt_capability(adapter); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_request_msix - Initialize MSI-X interrupts | 
|  | * | 
|  | * igbvf_request_msix allocates MSI-X vectors and requests interrupts from the | 
|  | * kernel. | 
|  | **/ | 
|  | static int igbvf_request_msix(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | int err = 0, vector = 0; | 
|  |  | 
|  | if (strlen(netdev->name) < (IFNAMSIZ - 5)) { | 
|  | sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name); | 
|  | sprintf(adapter->rx_ring->name, "%s-rx-0", netdev->name); | 
|  | } else { | 
|  | memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ); | 
|  | memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ); | 
|  | } | 
|  |  | 
|  | err = request_irq(adapter->msix_entries[vector].vector, | 
|  | igbvf_intr_msix_tx, 0, adapter->tx_ring->name, | 
|  | netdev); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | adapter->tx_ring->itr_register = E1000_EITR(vector); | 
|  | adapter->tx_ring->itr_val = 1952; | 
|  | vector++; | 
|  |  | 
|  | err = request_irq(adapter->msix_entries[vector].vector, | 
|  | igbvf_intr_msix_rx, 0, adapter->rx_ring->name, | 
|  | netdev); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | adapter->rx_ring->itr_register = E1000_EITR(vector); | 
|  | adapter->rx_ring->itr_val = 1952; | 
|  | vector++; | 
|  |  | 
|  | err = request_irq(adapter->msix_entries[vector].vector, | 
|  | igbvf_msix_other, 0, netdev->name, netdev); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | igbvf_configure_msix(adapter); | 
|  | return 0; | 
|  | out: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_alloc_queues - Allocate memory for all rings | 
|  | * @adapter: board private structure to initialize | 
|  | **/ | 
|  | static int __devinit igbvf_alloc_queues(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct net_device *netdev = adapter->netdev; | 
|  |  | 
|  | adapter->tx_ring = kzalloc(sizeof(struct igbvf_ring), GFP_KERNEL); | 
|  | if (!adapter->tx_ring) | 
|  | return -ENOMEM; | 
|  |  | 
|  | adapter->rx_ring = kzalloc(sizeof(struct igbvf_ring), GFP_KERNEL); | 
|  | if (!adapter->rx_ring) { | 
|  | kfree(adapter->tx_ring); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | netif_napi_add(netdev, &adapter->rx_ring->napi, igbvf_poll, 64); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_request_irq - initialize interrupts | 
|  | * | 
|  | * Attempts to configure interrupts using the best available | 
|  | * capabilities of the hardware and kernel. | 
|  | **/ | 
|  | static int igbvf_request_irq(struct igbvf_adapter *adapter) | 
|  | { | 
|  | int err = -1; | 
|  |  | 
|  | /* igbvf supports msi-x only */ | 
|  | if (adapter->msix_entries) | 
|  | err = igbvf_request_msix(adapter); | 
|  |  | 
|  | if (!err) | 
|  | return err; | 
|  |  | 
|  | dev_err(&adapter->pdev->dev, | 
|  | "Unable to allocate interrupt, Error: %d\n", err); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void igbvf_free_irq(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | int vector; | 
|  |  | 
|  | if (adapter->msix_entries) { | 
|  | for (vector = 0; vector < 3; vector++) | 
|  | free_irq(adapter->msix_entries[vector].vector, netdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_irq_disable - Mask off interrupt generation on the NIC | 
|  | **/ | 
|  | static void igbvf_irq_disable(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  |  | 
|  | ew32(EIMC, ~0); | 
|  |  | 
|  | if (adapter->msix_entries) | 
|  | ew32(EIAC, 0); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_irq_enable - Enable default interrupt generation settings | 
|  | **/ | 
|  | static void igbvf_irq_enable(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  |  | 
|  | ew32(EIAC, adapter->eims_enable_mask); | 
|  | ew32(EIAM, adapter->eims_enable_mask); | 
|  | ew32(EIMS, adapter->eims_enable_mask); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_poll - NAPI Rx polling callback | 
|  | * @napi: struct associated with this polling callback | 
|  | * @budget: amount of packets driver is allowed to process this poll | 
|  | **/ | 
|  | static int igbvf_poll(struct napi_struct *napi, int budget) | 
|  | { | 
|  | struct igbvf_ring *rx_ring = container_of(napi, struct igbvf_ring, napi); | 
|  | struct igbvf_adapter *adapter = rx_ring->adapter; | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | int work_done = 0; | 
|  |  | 
|  | igbvf_clean_rx_irq(adapter, &work_done, budget); | 
|  |  | 
|  | /* If not enough Rx work done, exit the polling mode */ | 
|  | if (work_done < budget) { | 
|  | napi_complete(napi); | 
|  |  | 
|  | if (adapter->itr_setting & 3) | 
|  | igbvf_set_itr(adapter); | 
|  |  | 
|  | if (!test_bit(__IGBVF_DOWN, &adapter->state)) | 
|  | ew32(EIMS, adapter->rx_ring->eims_value); | 
|  | } | 
|  |  | 
|  | return work_done; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_set_rlpml - set receive large packet maximum length | 
|  | * @adapter: board private structure | 
|  | * | 
|  | * Configure the maximum size of packets that will be received | 
|  | */ | 
|  | static void igbvf_set_rlpml(struct igbvf_adapter *adapter) | 
|  | { | 
|  | int max_frame_size = adapter->max_frame_size; | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  |  | 
|  | if (adapter->vlgrp) | 
|  | max_frame_size += VLAN_TAG_SIZE; | 
|  |  | 
|  | e1000_rlpml_set_vf(hw, max_frame_size); | 
|  | } | 
|  |  | 
|  | static void igbvf_vlan_rx_add_vid(struct net_device *netdev, u16 vid) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  |  | 
|  | if (hw->mac.ops.set_vfta(hw, vid, true)) | 
|  | dev_err(&adapter->pdev->dev, "Failed to add vlan id %d\n", vid); | 
|  | } | 
|  |  | 
|  | static void igbvf_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  |  | 
|  | igbvf_irq_disable(adapter); | 
|  | vlan_group_set_device(adapter->vlgrp, vid, NULL); | 
|  |  | 
|  | if (!test_bit(__IGBVF_DOWN, &adapter->state)) | 
|  | igbvf_irq_enable(adapter); | 
|  |  | 
|  | if (hw->mac.ops.set_vfta(hw, vid, false)) | 
|  | dev_err(&adapter->pdev->dev, | 
|  | "Failed to remove vlan id %d\n", vid); | 
|  | } | 
|  |  | 
|  | static void igbvf_vlan_rx_register(struct net_device *netdev, | 
|  | struct vlan_group *grp) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | adapter->vlgrp = grp; | 
|  | } | 
|  |  | 
|  | static void igbvf_restore_vlan(struct igbvf_adapter *adapter) | 
|  | { | 
|  | u16 vid; | 
|  |  | 
|  | if (!adapter->vlgrp) | 
|  | return; | 
|  |  | 
|  | for (vid = 0; vid < VLAN_N_VID; vid++) { | 
|  | if (!vlan_group_get_device(adapter->vlgrp, vid)) | 
|  | continue; | 
|  | igbvf_vlan_rx_add_vid(adapter->netdev, vid); | 
|  | } | 
|  |  | 
|  | igbvf_set_rlpml(adapter); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_configure_tx - Configure Transmit Unit after Reset | 
|  | * @adapter: board private structure | 
|  | * | 
|  | * Configure the Tx unit of the MAC after a reset. | 
|  | **/ | 
|  | static void igbvf_configure_tx(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | struct igbvf_ring *tx_ring = adapter->tx_ring; | 
|  | u64 tdba; | 
|  | u32 txdctl, dca_txctrl; | 
|  |  | 
|  | /* disable transmits */ | 
|  | txdctl = er32(TXDCTL(0)); | 
|  | ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE); | 
|  | msleep(10); | 
|  |  | 
|  | /* Setup the HW Tx Head and Tail descriptor pointers */ | 
|  | ew32(TDLEN(0), tx_ring->count * sizeof(union e1000_adv_tx_desc)); | 
|  | tdba = tx_ring->dma; | 
|  | ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32))); | 
|  | ew32(TDBAH(0), (tdba >> 32)); | 
|  | ew32(TDH(0), 0); | 
|  | ew32(TDT(0), 0); | 
|  | tx_ring->head = E1000_TDH(0); | 
|  | tx_ring->tail = E1000_TDT(0); | 
|  |  | 
|  | /* Turn off Relaxed Ordering on head write-backs.  The writebacks | 
|  | * MUST be delivered in order or it will completely screw up | 
|  | * our bookeeping. | 
|  | */ | 
|  | dca_txctrl = er32(DCA_TXCTRL(0)); | 
|  | dca_txctrl &= ~E1000_DCA_TXCTRL_TX_WB_RO_EN; | 
|  | ew32(DCA_TXCTRL(0), dca_txctrl); | 
|  |  | 
|  | /* enable transmits */ | 
|  | txdctl |= E1000_TXDCTL_QUEUE_ENABLE; | 
|  | ew32(TXDCTL(0), txdctl); | 
|  |  | 
|  | /* Setup Transmit Descriptor Settings for eop descriptor */ | 
|  | adapter->txd_cmd = E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_IFCS; | 
|  |  | 
|  | /* enable Report Status bit */ | 
|  | adapter->txd_cmd |= E1000_ADVTXD_DCMD_RS; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_setup_srrctl - configure the receive control registers | 
|  | * @adapter: Board private structure | 
|  | **/ | 
|  | static void igbvf_setup_srrctl(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | u32 srrctl = 0; | 
|  |  | 
|  | srrctl &= ~(E1000_SRRCTL_DESCTYPE_MASK | | 
|  | E1000_SRRCTL_BSIZEHDR_MASK | | 
|  | E1000_SRRCTL_BSIZEPKT_MASK); | 
|  |  | 
|  | /* Enable queue drop to avoid head of line blocking */ | 
|  | srrctl |= E1000_SRRCTL_DROP_EN; | 
|  |  | 
|  | /* Setup buffer sizes */ | 
|  | srrctl |= ALIGN(adapter->rx_buffer_len, 1024) >> | 
|  | E1000_SRRCTL_BSIZEPKT_SHIFT; | 
|  |  | 
|  | if (adapter->rx_buffer_len < 2048) { | 
|  | adapter->rx_ps_hdr_size = 0; | 
|  | srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF; | 
|  | } else { | 
|  | adapter->rx_ps_hdr_size = 128; | 
|  | srrctl |= adapter->rx_ps_hdr_size << | 
|  | E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; | 
|  | srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS; | 
|  | } | 
|  |  | 
|  | ew32(SRRCTL(0), srrctl); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_configure_rx - Configure Receive Unit after Reset | 
|  | * @adapter: board private structure | 
|  | * | 
|  | * Configure the Rx unit of the MAC after a reset. | 
|  | **/ | 
|  | static void igbvf_configure_rx(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | struct igbvf_ring *rx_ring = adapter->rx_ring; | 
|  | u64 rdba; | 
|  | u32 rdlen, rxdctl; | 
|  |  | 
|  | /* disable receives */ | 
|  | rxdctl = er32(RXDCTL(0)); | 
|  | ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE); | 
|  | msleep(10); | 
|  |  | 
|  | rdlen = rx_ring->count * sizeof(union e1000_adv_rx_desc); | 
|  |  | 
|  | /* | 
|  | * Setup the HW Rx Head and Tail Descriptor Pointers and | 
|  | * the Base and Length of the Rx Descriptor Ring | 
|  | */ | 
|  | rdba = rx_ring->dma; | 
|  | ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32))); | 
|  | ew32(RDBAH(0), (rdba >> 32)); | 
|  | ew32(RDLEN(0), rx_ring->count * sizeof(union e1000_adv_rx_desc)); | 
|  | rx_ring->head = E1000_RDH(0); | 
|  | rx_ring->tail = E1000_RDT(0); | 
|  | ew32(RDH(0), 0); | 
|  | ew32(RDT(0), 0); | 
|  |  | 
|  | rxdctl |= E1000_RXDCTL_QUEUE_ENABLE; | 
|  | rxdctl &= 0xFFF00000; | 
|  | rxdctl |= IGBVF_RX_PTHRESH; | 
|  | rxdctl |= IGBVF_RX_HTHRESH << 8; | 
|  | rxdctl |= IGBVF_RX_WTHRESH << 16; | 
|  |  | 
|  | igbvf_set_rlpml(adapter); | 
|  |  | 
|  | /* enable receives */ | 
|  | ew32(RXDCTL(0), rxdctl); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_set_multi - Multicast and Promiscuous mode set | 
|  | * @netdev: network interface device structure | 
|  | * | 
|  | * The set_multi entry point is called whenever the multicast address | 
|  | * list or the network interface flags are updated.  This routine is | 
|  | * responsible for configuring the hardware for proper multicast, | 
|  | * promiscuous mode, and all-multi behavior. | 
|  | **/ | 
|  | static void igbvf_set_multi(struct net_device *netdev) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | struct netdev_hw_addr *ha; | 
|  | u8  *mta_list = NULL; | 
|  | int i; | 
|  |  | 
|  | if (!netdev_mc_empty(netdev)) { | 
|  | mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC); | 
|  | if (!mta_list) { | 
|  | dev_err(&adapter->pdev->dev, | 
|  | "failed to allocate multicast filter list\n"); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* prepare a packed array of only addresses. */ | 
|  | i = 0; | 
|  | netdev_for_each_mc_addr(ha, netdev) | 
|  | memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN); | 
|  |  | 
|  | hw->mac.ops.update_mc_addr_list(hw, mta_list, i, 0, 0); | 
|  | kfree(mta_list); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_configure - configure the hardware for Rx and Tx | 
|  | * @adapter: private board structure | 
|  | **/ | 
|  | static void igbvf_configure(struct igbvf_adapter *adapter) | 
|  | { | 
|  | igbvf_set_multi(adapter->netdev); | 
|  |  | 
|  | igbvf_restore_vlan(adapter); | 
|  |  | 
|  | igbvf_configure_tx(adapter); | 
|  | igbvf_setup_srrctl(adapter); | 
|  | igbvf_configure_rx(adapter); | 
|  | igbvf_alloc_rx_buffers(adapter->rx_ring, | 
|  | igbvf_desc_unused(adapter->rx_ring)); | 
|  | } | 
|  |  | 
|  | /* igbvf_reset - bring the hardware into a known good state | 
|  | * | 
|  | * This function boots the hardware and enables some settings that | 
|  | * require a configuration cycle of the hardware - those cannot be | 
|  | * set/changed during runtime. After reset the device needs to be | 
|  | * properly configured for Rx, Tx etc. | 
|  | */ | 
|  | static void igbvf_reset(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct e1000_mac_info *mac = &adapter->hw.mac; | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  |  | 
|  | /* Allow time for pending master requests to run */ | 
|  | if (mac->ops.reset_hw(hw)) | 
|  | dev_err(&adapter->pdev->dev, "PF still resetting\n"); | 
|  |  | 
|  | mac->ops.init_hw(hw); | 
|  |  | 
|  | if (is_valid_ether_addr(adapter->hw.mac.addr)) { | 
|  | memcpy(netdev->dev_addr, adapter->hw.mac.addr, | 
|  | netdev->addr_len); | 
|  | memcpy(netdev->perm_addr, adapter->hw.mac.addr, | 
|  | netdev->addr_len); | 
|  | } | 
|  |  | 
|  | adapter->last_reset = jiffies; | 
|  | } | 
|  |  | 
|  | int igbvf_up(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  |  | 
|  | /* hardware has been reset, we need to reload some things */ | 
|  | igbvf_configure(adapter); | 
|  |  | 
|  | clear_bit(__IGBVF_DOWN, &adapter->state); | 
|  |  | 
|  | napi_enable(&adapter->rx_ring->napi); | 
|  | if (adapter->msix_entries) | 
|  | igbvf_configure_msix(adapter); | 
|  |  | 
|  | /* Clear any pending interrupts. */ | 
|  | er32(EICR); | 
|  | igbvf_irq_enable(adapter); | 
|  |  | 
|  | /* start the watchdog */ | 
|  | hw->mac.get_link_status = 1; | 
|  | mod_timer(&adapter->watchdog_timer, jiffies + 1); | 
|  |  | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void igbvf_down(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | u32 rxdctl, txdctl; | 
|  |  | 
|  | /* | 
|  | * signal that we're down so the interrupt handler does not | 
|  | * reschedule our watchdog timer | 
|  | */ | 
|  | set_bit(__IGBVF_DOWN, &adapter->state); | 
|  |  | 
|  | /* disable receives in the hardware */ | 
|  | rxdctl = er32(RXDCTL(0)); | 
|  | ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE); | 
|  |  | 
|  | netif_stop_queue(netdev); | 
|  |  | 
|  | /* disable transmits in the hardware */ | 
|  | txdctl = er32(TXDCTL(0)); | 
|  | ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE); | 
|  |  | 
|  | /* flush both disables and wait for them to finish */ | 
|  | e1e_flush(); | 
|  | msleep(10); | 
|  |  | 
|  | napi_disable(&adapter->rx_ring->napi); | 
|  |  | 
|  | igbvf_irq_disable(adapter); | 
|  |  | 
|  | del_timer_sync(&adapter->watchdog_timer); | 
|  |  | 
|  | netif_carrier_off(netdev); | 
|  |  | 
|  | /* record the stats before reset*/ | 
|  | igbvf_update_stats(adapter); | 
|  |  | 
|  | adapter->link_speed = 0; | 
|  | adapter->link_duplex = 0; | 
|  |  | 
|  | igbvf_reset(adapter); | 
|  | igbvf_clean_tx_ring(adapter->tx_ring); | 
|  | igbvf_clean_rx_ring(adapter->rx_ring); | 
|  | } | 
|  |  | 
|  | void igbvf_reinit_locked(struct igbvf_adapter *adapter) | 
|  | { | 
|  | might_sleep(); | 
|  | while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state)) | 
|  | msleep(1); | 
|  | igbvf_down(adapter); | 
|  | igbvf_up(adapter); | 
|  | clear_bit(__IGBVF_RESETTING, &adapter->state); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_sw_init - Initialize general software structures (struct igbvf_adapter) | 
|  | * @adapter: board private structure to initialize | 
|  | * | 
|  | * igbvf_sw_init initializes the Adapter private data structure. | 
|  | * Fields are initialized based on PCI device information and | 
|  | * OS network device settings (MTU size). | 
|  | **/ | 
|  | static int __devinit igbvf_sw_init(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | s32 rc; | 
|  |  | 
|  | adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; | 
|  | adapter->rx_ps_hdr_size = 0; | 
|  | adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; | 
|  | adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; | 
|  |  | 
|  | adapter->tx_int_delay = 8; | 
|  | adapter->tx_abs_int_delay = 32; | 
|  | adapter->rx_int_delay = 0; | 
|  | adapter->rx_abs_int_delay = 8; | 
|  | adapter->itr_setting = 3; | 
|  | adapter->itr = 20000; | 
|  |  | 
|  | /* Set various function pointers */ | 
|  | adapter->ei->init_ops(&adapter->hw); | 
|  |  | 
|  | rc = adapter->hw.mac.ops.init_params(&adapter->hw); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | rc = adapter->hw.mbx.ops.init_params(&adapter->hw); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | igbvf_set_interrupt_capability(adapter); | 
|  |  | 
|  | if (igbvf_alloc_queues(adapter)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | spin_lock_init(&adapter->tx_queue_lock); | 
|  |  | 
|  | /* Explicitly disable IRQ since the NIC can be in any state. */ | 
|  | igbvf_irq_disable(adapter); | 
|  |  | 
|  | spin_lock_init(&adapter->stats_lock); | 
|  |  | 
|  | set_bit(__IGBVF_DOWN, &adapter->state); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void igbvf_initialize_last_counter_stats(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  |  | 
|  | adapter->stats.last_gprc = er32(VFGPRC); | 
|  | adapter->stats.last_gorc = er32(VFGORC); | 
|  | adapter->stats.last_gptc = er32(VFGPTC); | 
|  | adapter->stats.last_gotc = er32(VFGOTC); | 
|  | adapter->stats.last_mprc = er32(VFMPRC); | 
|  | adapter->stats.last_gotlbc = er32(VFGOTLBC); | 
|  | adapter->stats.last_gptlbc = er32(VFGPTLBC); | 
|  | adapter->stats.last_gorlbc = er32(VFGORLBC); | 
|  | adapter->stats.last_gprlbc = er32(VFGPRLBC); | 
|  |  | 
|  | adapter->stats.base_gprc = er32(VFGPRC); | 
|  | adapter->stats.base_gorc = er32(VFGORC); | 
|  | adapter->stats.base_gptc = er32(VFGPTC); | 
|  | adapter->stats.base_gotc = er32(VFGOTC); | 
|  | adapter->stats.base_mprc = er32(VFMPRC); | 
|  | adapter->stats.base_gotlbc = er32(VFGOTLBC); | 
|  | adapter->stats.base_gptlbc = er32(VFGPTLBC); | 
|  | adapter->stats.base_gorlbc = er32(VFGORLBC); | 
|  | adapter->stats.base_gprlbc = er32(VFGPRLBC); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_open - Called when a network interface is made active | 
|  | * @netdev: network interface device structure | 
|  | * | 
|  | * Returns 0 on success, negative value on failure | 
|  | * | 
|  | * The open entry point is called when a network interface is made | 
|  | * active by the system (IFF_UP).  At this point all resources needed | 
|  | * for transmit and receive operations are allocated, the interrupt | 
|  | * handler is registered with the OS, the watchdog timer is started, | 
|  | * and the stack is notified that the interface is ready. | 
|  | **/ | 
|  | static int igbvf_open(struct net_device *netdev) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | int err; | 
|  |  | 
|  | /* disallow open during test */ | 
|  | if (test_bit(__IGBVF_TESTING, &adapter->state)) | 
|  | return -EBUSY; | 
|  |  | 
|  | /* allocate transmit descriptors */ | 
|  | err = igbvf_setup_tx_resources(adapter, adapter->tx_ring); | 
|  | if (err) | 
|  | goto err_setup_tx; | 
|  |  | 
|  | /* allocate receive descriptors */ | 
|  | err = igbvf_setup_rx_resources(adapter, adapter->rx_ring); | 
|  | if (err) | 
|  | goto err_setup_rx; | 
|  |  | 
|  | /* | 
|  | * before we allocate an interrupt, we must be ready to handle it. | 
|  | * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt | 
|  | * as soon as we call pci_request_irq, so we have to setup our | 
|  | * clean_rx handler before we do so. | 
|  | */ | 
|  | igbvf_configure(adapter); | 
|  |  | 
|  | err = igbvf_request_irq(adapter); | 
|  | if (err) | 
|  | goto err_req_irq; | 
|  |  | 
|  | /* From here on the code is the same as igbvf_up() */ | 
|  | clear_bit(__IGBVF_DOWN, &adapter->state); | 
|  |  | 
|  | napi_enable(&adapter->rx_ring->napi); | 
|  |  | 
|  | /* clear any pending interrupts */ | 
|  | er32(EICR); | 
|  |  | 
|  | igbvf_irq_enable(adapter); | 
|  |  | 
|  | /* start the watchdog */ | 
|  | hw->mac.get_link_status = 1; | 
|  | mod_timer(&adapter->watchdog_timer, jiffies + 1); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_req_irq: | 
|  | igbvf_free_rx_resources(adapter->rx_ring); | 
|  | err_setup_rx: | 
|  | igbvf_free_tx_resources(adapter->tx_ring); | 
|  | err_setup_tx: | 
|  | igbvf_reset(adapter); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_close - Disables a network interface | 
|  | * @netdev: network interface device structure | 
|  | * | 
|  | * Returns 0, this is not allowed to fail | 
|  | * | 
|  | * The close entry point is called when an interface is de-activated | 
|  | * by the OS.  The hardware is still under the drivers control, but | 
|  | * needs to be disabled.  A global MAC reset is issued to stop the | 
|  | * hardware, and all transmit and receive resources are freed. | 
|  | **/ | 
|  | static int igbvf_close(struct net_device *netdev) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | WARN_ON(test_bit(__IGBVF_RESETTING, &adapter->state)); | 
|  | igbvf_down(adapter); | 
|  |  | 
|  | igbvf_free_irq(adapter); | 
|  |  | 
|  | igbvf_free_tx_resources(adapter->tx_ring); | 
|  | igbvf_free_rx_resources(adapter->rx_ring); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | /** | 
|  | * igbvf_set_mac - Change the Ethernet Address of the NIC | 
|  | * @netdev: network interface device structure | 
|  | * @p: pointer to an address structure | 
|  | * | 
|  | * Returns 0 on success, negative on failure | 
|  | **/ | 
|  | static int igbvf_set_mac(struct net_device *netdev, void *p) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | struct sockaddr *addr = p; | 
|  |  | 
|  | if (!is_valid_ether_addr(addr->sa_data)) | 
|  | return -EADDRNOTAVAIL; | 
|  |  | 
|  | memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); | 
|  |  | 
|  | hw->mac.ops.rar_set(hw, hw->mac.addr, 0); | 
|  |  | 
|  | if (memcmp(addr->sa_data, hw->mac.addr, 6)) | 
|  | return -EADDRNOTAVAIL; | 
|  |  | 
|  | memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define UPDATE_VF_COUNTER(reg, name)                                    \ | 
|  | {                                                               \ | 
|  | u32 current_counter = er32(reg);                        \ | 
|  | if (current_counter < adapter->stats.last_##name)       \ | 
|  | adapter->stats.name += 0x100000000LL;           \ | 
|  | adapter->stats.last_##name = current_counter;           \ | 
|  | adapter->stats.name &= 0xFFFFFFFF00000000LL;            \ | 
|  | adapter->stats.name |= current_counter;                 \ | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_update_stats - Update the board statistics counters | 
|  | * @adapter: board private structure | 
|  | **/ | 
|  | void igbvf_update_stats(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  |  | 
|  | /* | 
|  | * Prevent stats update while adapter is being reset, link is down | 
|  | * or if the pci connection is down. | 
|  | */ | 
|  | if (adapter->link_speed == 0) | 
|  | return; | 
|  |  | 
|  | if (test_bit(__IGBVF_RESETTING, &adapter->state)) | 
|  | return; | 
|  |  | 
|  | if (pci_channel_offline(pdev)) | 
|  | return; | 
|  |  | 
|  | UPDATE_VF_COUNTER(VFGPRC, gprc); | 
|  | UPDATE_VF_COUNTER(VFGORC, gorc); | 
|  | UPDATE_VF_COUNTER(VFGPTC, gptc); | 
|  | UPDATE_VF_COUNTER(VFGOTC, gotc); | 
|  | UPDATE_VF_COUNTER(VFMPRC, mprc); | 
|  | UPDATE_VF_COUNTER(VFGOTLBC, gotlbc); | 
|  | UPDATE_VF_COUNTER(VFGPTLBC, gptlbc); | 
|  | UPDATE_VF_COUNTER(VFGORLBC, gorlbc); | 
|  | UPDATE_VF_COUNTER(VFGPRLBC, gprlbc); | 
|  |  | 
|  | /* Fill out the OS statistics structure */ | 
|  | adapter->net_stats.multicast = adapter->stats.mprc; | 
|  | } | 
|  |  | 
|  | static void igbvf_print_link_info(struct igbvf_adapter *adapter) | 
|  | { | 
|  | dev_info(&adapter->pdev->dev, "Link is Up %d Mbps %s\n", | 
|  | adapter->link_speed, | 
|  | ((adapter->link_duplex == FULL_DUPLEX) ? | 
|  | "Full Duplex" : "Half Duplex")); | 
|  | } | 
|  |  | 
|  | static bool igbvf_has_link(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | s32 ret_val = E1000_SUCCESS; | 
|  | bool link_active; | 
|  |  | 
|  | /* If interface is down, stay link down */ | 
|  | if (test_bit(__IGBVF_DOWN, &adapter->state)) | 
|  | return false; | 
|  |  | 
|  | ret_val = hw->mac.ops.check_for_link(hw); | 
|  | link_active = !hw->mac.get_link_status; | 
|  |  | 
|  | /* if check for link returns error we will need to reset */ | 
|  | if (ret_val && time_after(jiffies, adapter->last_reset + (10 * HZ))) | 
|  | schedule_work(&adapter->reset_task); | 
|  |  | 
|  | return link_active; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_watchdog - Timer Call-back | 
|  | * @data: pointer to adapter cast into an unsigned long | 
|  | **/ | 
|  | static void igbvf_watchdog(unsigned long data) | 
|  | { | 
|  | struct igbvf_adapter *adapter = (struct igbvf_adapter *) data; | 
|  |  | 
|  | /* Do the rest outside of interrupt context */ | 
|  | schedule_work(&adapter->watchdog_task); | 
|  | } | 
|  |  | 
|  | static void igbvf_watchdog_task(struct work_struct *work) | 
|  | { | 
|  | struct igbvf_adapter *adapter = container_of(work, | 
|  | struct igbvf_adapter, | 
|  | watchdog_task); | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | struct e1000_mac_info *mac = &adapter->hw.mac; | 
|  | struct igbvf_ring *tx_ring = adapter->tx_ring; | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | u32 link; | 
|  | int tx_pending = 0; | 
|  |  | 
|  | link = igbvf_has_link(adapter); | 
|  |  | 
|  | if (link) { | 
|  | if (!netif_carrier_ok(netdev)) { | 
|  | mac->ops.get_link_up_info(&adapter->hw, | 
|  | &adapter->link_speed, | 
|  | &adapter->link_duplex); | 
|  | igbvf_print_link_info(adapter); | 
|  |  | 
|  | netif_carrier_on(netdev); | 
|  | netif_wake_queue(netdev); | 
|  | } | 
|  | } else { | 
|  | if (netif_carrier_ok(netdev)) { | 
|  | adapter->link_speed = 0; | 
|  | adapter->link_duplex = 0; | 
|  | dev_info(&adapter->pdev->dev, "Link is Down\n"); | 
|  | netif_carrier_off(netdev); | 
|  | netif_stop_queue(netdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (netif_carrier_ok(netdev)) { | 
|  | igbvf_update_stats(adapter); | 
|  | } else { | 
|  | tx_pending = (igbvf_desc_unused(tx_ring) + 1 < | 
|  | tx_ring->count); | 
|  | if (tx_pending) { | 
|  | /* | 
|  | * We've lost link, so the controller stops DMA, | 
|  | * but we've got queued Tx work that's never going | 
|  | * to get done, so reset controller to flush Tx. | 
|  | * (Do the reset outside of interrupt context). | 
|  | */ | 
|  | adapter->tx_timeout_count++; | 
|  | schedule_work(&adapter->reset_task); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Cause software interrupt to ensure Rx ring is cleaned */ | 
|  | ew32(EICS, adapter->rx_ring->eims_value); | 
|  |  | 
|  | /* Reset the timer */ | 
|  | if (!test_bit(__IGBVF_DOWN, &adapter->state)) | 
|  | mod_timer(&adapter->watchdog_timer, | 
|  | round_jiffies(jiffies + (2 * HZ))); | 
|  | } | 
|  |  | 
|  | #define IGBVF_TX_FLAGS_CSUM             0x00000001 | 
|  | #define IGBVF_TX_FLAGS_VLAN             0x00000002 | 
|  | #define IGBVF_TX_FLAGS_TSO              0x00000004 | 
|  | #define IGBVF_TX_FLAGS_IPV4             0x00000008 | 
|  | #define IGBVF_TX_FLAGS_VLAN_MASK        0xffff0000 | 
|  | #define IGBVF_TX_FLAGS_VLAN_SHIFT       16 | 
|  |  | 
|  | static int igbvf_tso(struct igbvf_adapter *adapter, | 
|  | struct igbvf_ring *tx_ring, | 
|  | struct sk_buff *skb, u32 tx_flags, u8 *hdr_len) | 
|  | { | 
|  | struct e1000_adv_tx_context_desc *context_desc; | 
|  | unsigned int i; | 
|  | int err; | 
|  | struct igbvf_buffer *buffer_info; | 
|  | u32 info = 0, tu_cmd = 0; | 
|  | u32 mss_l4len_idx, l4len; | 
|  | *hdr_len = 0; | 
|  |  | 
|  | if (skb_header_cloned(skb)) { | 
|  | err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); | 
|  | if (err) { | 
|  | dev_err(&adapter->pdev->dev, | 
|  | "igbvf_tso returning an error\n"); | 
|  | return err; | 
|  | } | 
|  | } | 
|  |  | 
|  | l4len = tcp_hdrlen(skb); | 
|  | *hdr_len += l4len; | 
|  |  | 
|  | if (skb->protocol == htons(ETH_P_IP)) { | 
|  | struct iphdr *iph = ip_hdr(skb); | 
|  | iph->tot_len = 0; | 
|  | iph->check = 0; | 
|  | tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, | 
|  | iph->daddr, 0, | 
|  | IPPROTO_TCP, | 
|  | 0); | 
|  | } else if (skb_is_gso_v6(skb)) { | 
|  | ipv6_hdr(skb)->payload_len = 0; | 
|  | tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, | 
|  | &ipv6_hdr(skb)->daddr, | 
|  | 0, IPPROTO_TCP, 0); | 
|  | } | 
|  |  | 
|  | i = tx_ring->next_to_use; | 
|  |  | 
|  | buffer_info = &tx_ring->buffer_info[i]; | 
|  | context_desc = IGBVF_TX_CTXTDESC_ADV(*tx_ring, i); | 
|  | /* VLAN MACLEN IPLEN */ | 
|  | if (tx_flags & IGBVF_TX_FLAGS_VLAN) | 
|  | info |= (tx_flags & IGBVF_TX_FLAGS_VLAN_MASK); | 
|  | info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT); | 
|  | *hdr_len += skb_network_offset(skb); | 
|  | info |= (skb_transport_header(skb) - skb_network_header(skb)); | 
|  | *hdr_len += (skb_transport_header(skb) - skb_network_header(skb)); | 
|  | context_desc->vlan_macip_lens = cpu_to_le32(info); | 
|  |  | 
|  | /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ | 
|  | tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT); | 
|  |  | 
|  | if (skb->protocol == htons(ETH_P_IP)) | 
|  | tu_cmd |= E1000_ADVTXD_TUCMD_IPV4; | 
|  | tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP; | 
|  |  | 
|  | context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd); | 
|  |  | 
|  | /* MSS L4LEN IDX */ | 
|  | mss_l4len_idx = (skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT); | 
|  | mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT); | 
|  |  | 
|  | context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); | 
|  | context_desc->seqnum_seed = 0; | 
|  |  | 
|  | buffer_info->time_stamp = jiffies; | 
|  | buffer_info->next_to_watch = i; | 
|  | buffer_info->dma = 0; | 
|  | i++; | 
|  | if (i == tx_ring->count) | 
|  | i = 0; | 
|  |  | 
|  | tx_ring->next_to_use = i; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter, | 
|  | struct igbvf_ring *tx_ring, | 
|  | struct sk_buff *skb, u32 tx_flags) | 
|  | { | 
|  | struct e1000_adv_tx_context_desc *context_desc; | 
|  | unsigned int i; | 
|  | struct igbvf_buffer *buffer_info; | 
|  | u32 info = 0, tu_cmd = 0; | 
|  |  | 
|  | if ((skb->ip_summed == CHECKSUM_PARTIAL) || | 
|  | (tx_flags & IGBVF_TX_FLAGS_VLAN)) { | 
|  | i = tx_ring->next_to_use; | 
|  | buffer_info = &tx_ring->buffer_info[i]; | 
|  | context_desc = IGBVF_TX_CTXTDESC_ADV(*tx_ring, i); | 
|  |  | 
|  | if (tx_flags & IGBVF_TX_FLAGS_VLAN) | 
|  | info |= (tx_flags & IGBVF_TX_FLAGS_VLAN_MASK); | 
|  |  | 
|  | info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT); | 
|  | if (skb->ip_summed == CHECKSUM_PARTIAL) | 
|  | info |= (skb_transport_header(skb) - | 
|  | skb_network_header(skb)); | 
|  |  | 
|  |  | 
|  | context_desc->vlan_macip_lens = cpu_to_le32(info); | 
|  |  | 
|  | tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT); | 
|  |  | 
|  | if (skb->ip_summed == CHECKSUM_PARTIAL) { | 
|  | switch (skb->protocol) { | 
|  | case __constant_htons(ETH_P_IP): | 
|  | tu_cmd |= E1000_ADVTXD_TUCMD_IPV4; | 
|  | if (ip_hdr(skb)->protocol == IPPROTO_TCP) | 
|  | tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP; | 
|  | break; | 
|  | case __constant_htons(ETH_P_IPV6): | 
|  | if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) | 
|  | tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd); | 
|  | context_desc->seqnum_seed = 0; | 
|  | context_desc->mss_l4len_idx = 0; | 
|  |  | 
|  | buffer_info->time_stamp = jiffies; | 
|  | buffer_info->next_to_watch = i; | 
|  | buffer_info->dma = 0; | 
|  | i++; | 
|  | if (i == tx_ring->count) | 
|  | i = 0; | 
|  | tx_ring->next_to_use = i; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static int igbvf_maybe_stop_tx(struct net_device *netdev, int size) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | /* there is enough descriptors then we don't need to worry  */ | 
|  | if (igbvf_desc_unused(adapter->tx_ring) >= size) | 
|  | return 0; | 
|  |  | 
|  | netif_stop_queue(netdev); | 
|  |  | 
|  | smp_mb(); | 
|  |  | 
|  | /* We need to check again just in case room has been made available */ | 
|  | if (igbvf_desc_unused(adapter->tx_ring) < size) | 
|  | return -EBUSY; | 
|  |  | 
|  | netif_wake_queue(netdev); | 
|  |  | 
|  | ++adapter->restart_queue; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define IGBVF_MAX_TXD_PWR       16 | 
|  | #define IGBVF_MAX_DATA_PER_TXD  (1 << IGBVF_MAX_TXD_PWR) | 
|  |  | 
|  | static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, | 
|  | struct igbvf_ring *tx_ring, | 
|  | struct sk_buff *skb, | 
|  | unsigned int first) | 
|  | { | 
|  | struct igbvf_buffer *buffer_info; | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  | unsigned int len = skb_headlen(skb); | 
|  | unsigned int count = 0, i; | 
|  | unsigned int f; | 
|  |  | 
|  | i = tx_ring->next_to_use; | 
|  |  | 
|  | buffer_info = &tx_ring->buffer_info[i]; | 
|  | BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD); | 
|  | buffer_info->length = len; | 
|  | /* set time_stamp *before* dma to help avoid a possible race */ | 
|  | buffer_info->time_stamp = jiffies; | 
|  | buffer_info->next_to_watch = i; | 
|  | buffer_info->mapped_as_page = false; | 
|  | buffer_info->dma = dma_map_single(&pdev->dev, skb->data, len, | 
|  | DMA_TO_DEVICE); | 
|  | if (dma_mapping_error(&pdev->dev, buffer_info->dma)) | 
|  | goto dma_error; | 
|  |  | 
|  |  | 
|  | for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) { | 
|  | struct skb_frag_struct *frag; | 
|  |  | 
|  | count++; | 
|  | i++; | 
|  | if (i == tx_ring->count) | 
|  | i = 0; | 
|  |  | 
|  | frag = &skb_shinfo(skb)->frags[f]; | 
|  | len = frag->size; | 
|  |  | 
|  | buffer_info = &tx_ring->buffer_info[i]; | 
|  | BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD); | 
|  | buffer_info->length = len; | 
|  | buffer_info->time_stamp = jiffies; | 
|  | buffer_info->next_to_watch = i; | 
|  | buffer_info->mapped_as_page = true; | 
|  | buffer_info->dma = dma_map_page(&pdev->dev, | 
|  | frag->page, | 
|  | frag->page_offset, | 
|  | len, | 
|  | DMA_TO_DEVICE); | 
|  | if (dma_mapping_error(&pdev->dev, buffer_info->dma)) | 
|  | goto dma_error; | 
|  | } | 
|  |  | 
|  | tx_ring->buffer_info[i].skb = skb; | 
|  | tx_ring->buffer_info[first].next_to_watch = i; | 
|  |  | 
|  | return ++count; | 
|  |  | 
|  | dma_error: | 
|  | dev_err(&pdev->dev, "TX DMA map failed\n"); | 
|  |  | 
|  | /* clear timestamp and dma mappings for failed buffer_info mapping */ | 
|  | buffer_info->dma = 0; | 
|  | buffer_info->time_stamp = 0; | 
|  | buffer_info->length = 0; | 
|  | buffer_info->next_to_watch = 0; | 
|  | buffer_info->mapped_as_page = false; | 
|  | if (count) | 
|  | count--; | 
|  |  | 
|  | /* clear timestamp and dma mappings for remaining portion of packet */ | 
|  | while (count--) { | 
|  | if (i==0) | 
|  | i += tx_ring->count; | 
|  | i--; | 
|  | buffer_info = &tx_ring->buffer_info[i]; | 
|  | igbvf_put_txbuf(adapter, buffer_info); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter, | 
|  | struct igbvf_ring *tx_ring, | 
|  | int tx_flags, int count, u32 paylen, | 
|  | u8 hdr_len) | 
|  | { | 
|  | union e1000_adv_tx_desc *tx_desc = NULL; | 
|  | struct igbvf_buffer *buffer_info; | 
|  | u32 olinfo_status = 0, cmd_type_len; | 
|  | unsigned int i; | 
|  |  | 
|  | cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS | | 
|  | E1000_ADVTXD_DCMD_DEXT); | 
|  |  | 
|  | if (tx_flags & IGBVF_TX_FLAGS_VLAN) | 
|  | cmd_type_len |= E1000_ADVTXD_DCMD_VLE; | 
|  |  | 
|  | if (tx_flags & IGBVF_TX_FLAGS_TSO) { | 
|  | cmd_type_len |= E1000_ADVTXD_DCMD_TSE; | 
|  |  | 
|  | /* insert tcp checksum */ | 
|  | olinfo_status |= E1000_TXD_POPTS_TXSM << 8; | 
|  |  | 
|  | /* insert ip checksum */ | 
|  | if (tx_flags & IGBVF_TX_FLAGS_IPV4) | 
|  | olinfo_status |= E1000_TXD_POPTS_IXSM << 8; | 
|  |  | 
|  | } else if (tx_flags & IGBVF_TX_FLAGS_CSUM) { | 
|  | olinfo_status |= E1000_TXD_POPTS_TXSM << 8; | 
|  | } | 
|  |  | 
|  | olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT); | 
|  |  | 
|  | i = tx_ring->next_to_use; | 
|  | while (count--) { | 
|  | buffer_info = &tx_ring->buffer_info[i]; | 
|  | tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i); | 
|  | tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); | 
|  | tx_desc->read.cmd_type_len = | 
|  | cpu_to_le32(cmd_type_len | buffer_info->length); | 
|  | tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); | 
|  | i++; | 
|  | if (i == tx_ring->count) | 
|  | i = 0; | 
|  | } | 
|  |  | 
|  | tx_desc->read.cmd_type_len |= cpu_to_le32(adapter->txd_cmd); | 
|  | /* Force memory writes to complete before letting h/w | 
|  | * know there are new descriptors to fetch.  (Only | 
|  | * applicable for weak-ordered memory model archs, | 
|  | * such as IA-64). */ | 
|  | wmb(); | 
|  |  | 
|  | tx_ring->next_to_use = i; | 
|  | writel(i, adapter->hw.hw_addr + tx_ring->tail); | 
|  | /* we need this if more than one processor can write to our tail | 
|  | * at a time, it syncronizes IO on IA64/Altix systems */ | 
|  | mmiowb(); | 
|  | } | 
|  |  | 
|  | static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb, | 
|  | struct net_device *netdev, | 
|  | struct igbvf_ring *tx_ring) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  | unsigned int first, tx_flags = 0; | 
|  | u8 hdr_len = 0; | 
|  | int count = 0; | 
|  | int tso = 0; | 
|  |  | 
|  | if (test_bit(__IGBVF_DOWN, &adapter->state)) { | 
|  | dev_kfree_skb_any(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | if (skb->len <= 0) { | 
|  | dev_kfree_skb_any(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * need: count + 4 desc gap to keep tail from touching | 
|  | *       + 2 desc gap to keep tail from touching head, | 
|  | *       + 1 desc for skb->data, | 
|  | *       + 1 desc for context descriptor, | 
|  | * head, otherwise try next time | 
|  | */ | 
|  | if (igbvf_maybe_stop_tx(netdev, skb_shinfo(skb)->nr_frags + 4)) { | 
|  | /* this is a hard error */ | 
|  | return NETDEV_TX_BUSY; | 
|  | } | 
|  |  | 
|  | if (adapter->vlgrp && vlan_tx_tag_present(skb)) { | 
|  | tx_flags |= IGBVF_TX_FLAGS_VLAN; | 
|  | tx_flags |= (vlan_tx_tag_get(skb) << IGBVF_TX_FLAGS_VLAN_SHIFT); | 
|  | } | 
|  |  | 
|  | if (skb->protocol == htons(ETH_P_IP)) | 
|  | tx_flags |= IGBVF_TX_FLAGS_IPV4; | 
|  |  | 
|  | first = tx_ring->next_to_use; | 
|  |  | 
|  | tso = skb_is_gso(skb) ? | 
|  | igbvf_tso(adapter, tx_ring, skb, tx_flags, &hdr_len) : 0; | 
|  | if (unlikely(tso < 0)) { | 
|  | dev_kfree_skb_any(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | if (tso) | 
|  | tx_flags |= IGBVF_TX_FLAGS_TSO; | 
|  | else if (igbvf_tx_csum(adapter, tx_ring, skb, tx_flags) && | 
|  | (skb->ip_summed == CHECKSUM_PARTIAL)) | 
|  | tx_flags |= IGBVF_TX_FLAGS_CSUM; | 
|  |  | 
|  | /* | 
|  | * count reflects descriptors mapped, if 0 then mapping error | 
|  | * has occurred and we need to rewind the descriptor queue | 
|  | */ | 
|  | count = igbvf_tx_map_adv(adapter, tx_ring, skb, first); | 
|  |  | 
|  | if (count) { | 
|  | igbvf_tx_queue_adv(adapter, tx_ring, tx_flags, count, | 
|  | skb->len, hdr_len); | 
|  | /* Make sure there is space in the ring for the next send. */ | 
|  | igbvf_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 4); | 
|  | } else { | 
|  | dev_kfree_skb_any(skb); | 
|  | tx_ring->buffer_info[first].time_stamp = 0; | 
|  | tx_ring->next_to_use = first; | 
|  | } | 
|  |  | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | static netdev_tx_t igbvf_xmit_frame(struct sk_buff *skb, | 
|  | struct net_device *netdev) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  | struct igbvf_ring *tx_ring; | 
|  |  | 
|  | if (test_bit(__IGBVF_DOWN, &adapter->state)) { | 
|  | dev_kfree_skb_any(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | tx_ring = &adapter->tx_ring[0]; | 
|  |  | 
|  | return igbvf_xmit_frame_ring_adv(skb, netdev, tx_ring); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_tx_timeout - Respond to a Tx Hang | 
|  | * @netdev: network interface device structure | 
|  | **/ | 
|  | static void igbvf_tx_timeout(struct net_device *netdev) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | /* Do the reset outside of interrupt context */ | 
|  | adapter->tx_timeout_count++; | 
|  | schedule_work(&adapter->reset_task); | 
|  | } | 
|  |  | 
|  | static void igbvf_reset_task(struct work_struct *work) | 
|  | { | 
|  | struct igbvf_adapter *adapter; | 
|  | adapter = container_of(work, struct igbvf_adapter, reset_task); | 
|  |  | 
|  | igbvf_reinit_locked(adapter); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_get_stats - Get System Network Statistics | 
|  | * @netdev: network interface device structure | 
|  | * | 
|  | * Returns the address of the device statistics structure. | 
|  | * The statistics are actually updated from the timer callback. | 
|  | **/ | 
|  | static struct net_device_stats *igbvf_get_stats(struct net_device *netdev) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | /* only return the current stats */ | 
|  | return &adapter->net_stats; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_change_mtu - Change the Maximum Transfer Unit | 
|  | * @netdev: network interface device structure | 
|  | * @new_mtu: new value for maximum frame size | 
|  | * | 
|  | * Returns 0 on success, negative on failure | 
|  | **/ | 
|  | static int igbvf_change_mtu(struct net_device *netdev, int new_mtu) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  | int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; | 
|  |  | 
|  | if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { | 
|  | dev_err(&adapter->pdev->dev, "Invalid MTU setting\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | #define MAX_STD_JUMBO_FRAME_SIZE 9234 | 
|  | if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { | 
|  | dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state)) | 
|  | msleep(1); | 
|  | /* igbvf_down has a dependency on max_frame_size */ | 
|  | adapter->max_frame_size = max_frame; | 
|  | if (netif_running(netdev)) | 
|  | igbvf_down(adapter); | 
|  |  | 
|  | /* | 
|  | * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN | 
|  | * means we reserve 2 more, this pushes us to allocate from the next | 
|  | * larger slab size. | 
|  | * i.e. RXBUFFER_2048 --> size-4096 slab | 
|  | * However with the new *_jumbo_rx* routines, jumbo receives will use | 
|  | * fragmented skbs | 
|  | */ | 
|  |  | 
|  | if (max_frame <= 1024) | 
|  | adapter->rx_buffer_len = 1024; | 
|  | else if (max_frame <= 2048) | 
|  | adapter->rx_buffer_len = 2048; | 
|  | else | 
|  | #if (PAGE_SIZE / 2) > 16384 | 
|  | adapter->rx_buffer_len = 16384; | 
|  | #else | 
|  | adapter->rx_buffer_len = PAGE_SIZE / 2; | 
|  | #endif | 
|  |  | 
|  |  | 
|  | /* adjust allocation if LPE protects us, and we aren't using SBP */ | 
|  | if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) || | 
|  | (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)) | 
|  | adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + | 
|  | ETH_FCS_LEN; | 
|  |  | 
|  | dev_info(&adapter->pdev->dev, "changing MTU from %d to %d\n", | 
|  | netdev->mtu, new_mtu); | 
|  | netdev->mtu = new_mtu; | 
|  |  | 
|  | if (netif_running(netdev)) | 
|  | igbvf_up(adapter); | 
|  | else | 
|  | igbvf_reset(adapter); | 
|  |  | 
|  | clear_bit(__IGBVF_RESETTING, &adapter->state); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int igbvf_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) | 
|  | { | 
|  | switch (cmd) { | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int igbvf_suspend(struct pci_dev *pdev, pm_message_t state) | 
|  | { | 
|  | struct net_device *netdev = pci_get_drvdata(pdev); | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  | #ifdef CONFIG_PM | 
|  | int retval = 0; | 
|  | #endif | 
|  |  | 
|  | netif_device_detach(netdev); | 
|  |  | 
|  | if (netif_running(netdev)) { | 
|  | WARN_ON(test_bit(__IGBVF_RESETTING, &adapter->state)); | 
|  | igbvf_down(adapter); | 
|  | igbvf_free_irq(adapter); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | retval = pci_save_state(pdev); | 
|  | if (retval) | 
|  | return retval; | 
|  | #endif | 
|  |  | 
|  | pci_disable_device(pdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int igbvf_resume(struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *netdev = pci_get_drvdata(pdev); | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  | u32 err; | 
|  |  | 
|  | pci_restore_state(pdev); | 
|  | err = pci_enable_device_mem(pdev); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | if (netif_running(netdev)) { | 
|  | err = igbvf_request_irq(adapter); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | igbvf_reset(adapter); | 
|  |  | 
|  | if (netif_running(netdev)) | 
|  | igbvf_up(adapter); | 
|  |  | 
|  | netif_device_attach(netdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void igbvf_shutdown(struct pci_dev *pdev) | 
|  | { | 
|  | igbvf_suspend(pdev, PMSG_SUSPEND); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | /* | 
|  | * Polling 'interrupt' - used by things like netconsole to send skbs | 
|  | * without having to re-enable interrupts. It's not called while | 
|  | * the interrupt routine is executing. | 
|  | */ | 
|  | static void igbvf_netpoll(struct net_device *netdev) | 
|  | { | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | disable_irq(adapter->pdev->irq); | 
|  |  | 
|  | igbvf_clean_tx_irq(adapter->tx_ring); | 
|  |  | 
|  | enable_irq(adapter->pdev->irq); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * igbvf_io_error_detected - called when PCI error is detected | 
|  | * @pdev: Pointer to PCI device | 
|  | * @state: The current pci connection state | 
|  | * | 
|  | * This function is called after a PCI bus error affecting | 
|  | * this device has been detected. | 
|  | */ | 
|  | static pci_ers_result_t igbvf_io_error_detected(struct pci_dev *pdev, | 
|  | pci_channel_state_t state) | 
|  | { | 
|  | struct net_device *netdev = pci_get_drvdata(pdev); | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | netif_device_detach(netdev); | 
|  |  | 
|  | if (state == pci_channel_io_perm_failure) | 
|  | return PCI_ERS_RESULT_DISCONNECT; | 
|  |  | 
|  | if (netif_running(netdev)) | 
|  | igbvf_down(adapter); | 
|  | pci_disable_device(pdev); | 
|  |  | 
|  | /* Request a slot slot reset. */ | 
|  | return PCI_ERS_RESULT_NEED_RESET; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_io_slot_reset - called after the pci bus has been reset. | 
|  | * @pdev: Pointer to PCI device | 
|  | * | 
|  | * Restart the card from scratch, as if from a cold-boot. Implementation | 
|  | * resembles the first-half of the igbvf_resume routine. | 
|  | */ | 
|  | static pci_ers_result_t igbvf_io_slot_reset(struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *netdev = pci_get_drvdata(pdev); | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | if (pci_enable_device_mem(pdev)) { | 
|  | dev_err(&pdev->dev, | 
|  | "Cannot re-enable PCI device after reset.\n"); | 
|  | return PCI_ERS_RESULT_DISCONNECT; | 
|  | } | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | igbvf_reset(adapter); | 
|  |  | 
|  | return PCI_ERS_RESULT_RECOVERED; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_io_resume - called when traffic can start flowing again. | 
|  | * @pdev: Pointer to PCI device | 
|  | * | 
|  | * This callback is called when the error recovery driver tells us that | 
|  | * its OK to resume normal operation. Implementation resembles the | 
|  | * second-half of the igbvf_resume routine. | 
|  | */ | 
|  | static void igbvf_io_resume(struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *netdev = pci_get_drvdata(pdev); | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  |  | 
|  | if (netif_running(netdev)) { | 
|  | if (igbvf_up(adapter)) { | 
|  | dev_err(&pdev->dev, | 
|  | "can't bring device back up after reset\n"); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | netif_device_attach(netdev); | 
|  | } | 
|  |  | 
|  | static void igbvf_print_device_info(struct igbvf_adapter *adapter) | 
|  | { | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | struct pci_dev *pdev = adapter->pdev; | 
|  |  | 
|  | dev_info(&pdev->dev, "Intel(R) 82576 Virtual Function\n"); | 
|  | dev_info(&pdev->dev, "Address: %pM\n", netdev->dev_addr); | 
|  | dev_info(&pdev->dev, "MAC: %d\n", hw->mac.type); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops igbvf_netdev_ops = { | 
|  | .ndo_open                       = igbvf_open, | 
|  | .ndo_stop                       = igbvf_close, | 
|  | .ndo_start_xmit                 = igbvf_xmit_frame, | 
|  | .ndo_get_stats                  = igbvf_get_stats, | 
|  | .ndo_set_multicast_list         = igbvf_set_multi, | 
|  | .ndo_set_mac_address            = igbvf_set_mac, | 
|  | .ndo_change_mtu                 = igbvf_change_mtu, | 
|  | .ndo_do_ioctl                   = igbvf_ioctl, | 
|  | .ndo_tx_timeout                 = igbvf_tx_timeout, | 
|  | .ndo_vlan_rx_register           = igbvf_vlan_rx_register, | 
|  | .ndo_vlan_rx_add_vid            = igbvf_vlan_rx_add_vid, | 
|  | .ndo_vlan_rx_kill_vid           = igbvf_vlan_rx_kill_vid, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller            = igbvf_netpoll, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * igbvf_probe - Device Initialization Routine | 
|  | * @pdev: PCI device information struct | 
|  | * @ent: entry in igbvf_pci_tbl | 
|  | * | 
|  | * Returns 0 on success, negative on failure | 
|  | * | 
|  | * igbvf_probe initializes an adapter identified by a pci_dev structure. | 
|  | * The OS initialization, configuring of the adapter private structure, | 
|  | * and a hardware reset occur. | 
|  | **/ | 
|  | static int __devinit igbvf_probe(struct pci_dev *pdev, | 
|  | const struct pci_device_id *ent) | 
|  | { | 
|  | struct net_device *netdev; | 
|  | struct igbvf_adapter *adapter; | 
|  | struct e1000_hw *hw; | 
|  | const struct igbvf_info *ei = igbvf_info_tbl[ent->driver_data]; | 
|  |  | 
|  | static int cards_found; | 
|  | int err, pci_using_dac; | 
|  |  | 
|  | err = pci_enable_device_mem(pdev); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | pci_using_dac = 0; | 
|  | err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); | 
|  | if (!err) { | 
|  | err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); | 
|  | if (!err) | 
|  | pci_using_dac = 1; | 
|  | } else { | 
|  | err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); | 
|  | if (err) { | 
|  | err = dma_set_coherent_mask(&pdev->dev, | 
|  | DMA_BIT_MASK(32)); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "No usable DMA " | 
|  | "configuration, aborting\n"); | 
|  | goto err_dma; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | err = pci_request_regions(pdev, igbvf_driver_name); | 
|  | if (err) | 
|  | goto err_pci_reg; | 
|  |  | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | err = -ENOMEM; | 
|  | netdev = alloc_etherdev(sizeof(struct igbvf_adapter)); | 
|  | if (!netdev) | 
|  | goto err_alloc_etherdev; | 
|  |  | 
|  | SET_NETDEV_DEV(netdev, &pdev->dev); | 
|  |  | 
|  | pci_set_drvdata(pdev, netdev); | 
|  | adapter = netdev_priv(netdev); | 
|  | hw = &adapter->hw; | 
|  | adapter->netdev = netdev; | 
|  | adapter->pdev = pdev; | 
|  | adapter->ei = ei; | 
|  | adapter->pba = ei->pba; | 
|  | adapter->flags = ei->flags; | 
|  | adapter->hw.back = adapter; | 
|  | adapter->hw.mac.type = ei->mac; | 
|  | adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; | 
|  |  | 
|  | /* PCI config space info */ | 
|  |  | 
|  | hw->vendor_id = pdev->vendor; | 
|  | hw->device_id = pdev->device; | 
|  | hw->subsystem_vendor_id = pdev->subsystem_vendor; | 
|  | hw->subsystem_device_id = pdev->subsystem_device; | 
|  | hw->revision_id = pdev->revision; | 
|  |  | 
|  | err = -EIO; | 
|  | adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0), | 
|  | pci_resource_len(pdev, 0)); | 
|  |  | 
|  | if (!adapter->hw.hw_addr) | 
|  | goto err_ioremap; | 
|  |  | 
|  | if (ei->get_variants) { | 
|  | err = ei->get_variants(adapter); | 
|  | if (err) | 
|  | goto err_ioremap; | 
|  | } | 
|  |  | 
|  | /* setup adapter struct */ | 
|  | err = igbvf_sw_init(adapter); | 
|  | if (err) | 
|  | goto err_sw_init; | 
|  |  | 
|  | /* construct the net_device struct */ | 
|  | netdev->netdev_ops = &igbvf_netdev_ops; | 
|  |  | 
|  | igbvf_set_ethtool_ops(netdev); | 
|  | netdev->watchdog_timeo = 5 * HZ; | 
|  | strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); | 
|  |  | 
|  | adapter->bd_number = cards_found++; | 
|  |  | 
|  | netdev->features = NETIF_F_SG | | 
|  | NETIF_F_IP_CSUM | | 
|  | NETIF_F_HW_VLAN_TX | | 
|  | NETIF_F_HW_VLAN_RX | | 
|  | NETIF_F_HW_VLAN_FILTER; | 
|  |  | 
|  | netdev->features |= NETIF_F_IPV6_CSUM; | 
|  | netdev->features |= NETIF_F_TSO; | 
|  | netdev->features |= NETIF_F_TSO6; | 
|  |  | 
|  | if (pci_using_dac) | 
|  | netdev->features |= NETIF_F_HIGHDMA; | 
|  |  | 
|  | netdev->vlan_features |= NETIF_F_TSO; | 
|  | netdev->vlan_features |= NETIF_F_TSO6; | 
|  | netdev->vlan_features |= NETIF_F_IP_CSUM; | 
|  | netdev->vlan_features |= NETIF_F_IPV6_CSUM; | 
|  | netdev->vlan_features |= NETIF_F_SG; | 
|  |  | 
|  | /*reset the controller to put the device in a known good state */ | 
|  | err = hw->mac.ops.reset_hw(hw); | 
|  | if (err) { | 
|  | dev_info(&pdev->dev, | 
|  | "PF still in reset state, assigning new address." | 
|  | " Is the PF interface up?\n"); | 
|  | dev_hw_addr_random(adapter->netdev, hw->mac.addr); | 
|  | } else { | 
|  | err = hw->mac.ops.read_mac_addr(hw); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "Error reading MAC address\n"); | 
|  | goto err_hw_init; | 
|  | } | 
|  | } | 
|  |  | 
|  | memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); | 
|  | memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); | 
|  |  | 
|  | if (!is_valid_ether_addr(netdev->perm_addr)) { | 
|  | dev_err(&pdev->dev, "Invalid MAC Address: %pM\n", | 
|  | netdev->dev_addr); | 
|  | err = -EIO; | 
|  | goto err_hw_init; | 
|  | } | 
|  |  | 
|  | setup_timer(&adapter->watchdog_timer, &igbvf_watchdog, | 
|  | (unsigned long) adapter); | 
|  |  | 
|  | INIT_WORK(&adapter->reset_task, igbvf_reset_task); | 
|  | INIT_WORK(&adapter->watchdog_task, igbvf_watchdog_task); | 
|  |  | 
|  | /* ring size defaults */ | 
|  | adapter->rx_ring->count = 1024; | 
|  | adapter->tx_ring->count = 1024; | 
|  |  | 
|  | /* reset the hardware with the new settings */ | 
|  | igbvf_reset(adapter); | 
|  |  | 
|  | strcpy(netdev->name, "eth%d"); | 
|  | err = register_netdev(netdev); | 
|  | if (err) | 
|  | goto err_hw_init; | 
|  |  | 
|  | /* tell the stack to leave us alone until igbvf_open() is called */ | 
|  | netif_carrier_off(netdev); | 
|  | netif_stop_queue(netdev); | 
|  |  | 
|  | igbvf_print_device_info(adapter); | 
|  |  | 
|  | igbvf_initialize_last_counter_stats(adapter); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_hw_init: | 
|  | kfree(adapter->tx_ring); | 
|  | kfree(adapter->rx_ring); | 
|  | err_sw_init: | 
|  | igbvf_reset_interrupt_capability(adapter); | 
|  | iounmap(adapter->hw.hw_addr); | 
|  | err_ioremap: | 
|  | free_netdev(netdev); | 
|  | err_alloc_etherdev: | 
|  | pci_release_regions(pdev); | 
|  | err_pci_reg: | 
|  | err_dma: | 
|  | pci_disable_device(pdev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * igbvf_remove - Device Removal Routine | 
|  | * @pdev: PCI device information struct | 
|  | * | 
|  | * igbvf_remove is called by the PCI subsystem to alert the driver | 
|  | * that it should release a PCI device.  The could be caused by a | 
|  | * Hot-Plug event, or because the driver is going to be removed from | 
|  | * memory. | 
|  | **/ | 
|  | static void __devexit igbvf_remove(struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *netdev = pci_get_drvdata(pdev); | 
|  | struct igbvf_adapter *adapter = netdev_priv(netdev); | 
|  | struct e1000_hw *hw = &adapter->hw; | 
|  |  | 
|  | /* | 
|  | * The watchdog timer may be rescheduled, so explicitly | 
|  | * disable it from being rescheduled. | 
|  | */ | 
|  | set_bit(__IGBVF_DOWN, &adapter->state); | 
|  | del_timer_sync(&adapter->watchdog_timer); | 
|  |  | 
|  | cancel_work_sync(&adapter->reset_task); | 
|  | cancel_work_sync(&adapter->watchdog_task); | 
|  |  | 
|  | unregister_netdev(netdev); | 
|  |  | 
|  | igbvf_reset_interrupt_capability(adapter); | 
|  |  | 
|  | /* | 
|  | * it is important to delete the napi struct prior to freeing the | 
|  | * rx ring so that you do not end up with null pointer refs | 
|  | */ | 
|  | netif_napi_del(&adapter->rx_ring->napi); | 
|  | kfree(adapter->tx_ring); | 
|  | kfree(adapter->rx_ring); | 
|  |  | 
|  | iounmap(hw->hw_addr); | 
|  | if (hw->flash_address) | 
|  | iounmap(hw->flash_address); | 
|  | pci_release_regions(pdev); | 
|  |  | 
|  | free_netdev(netdev); | 
|  |  | 
|  | pci_disable_device(pdev); | 
|  | } | 
|  |  | 
|  | /* PCI Error Recovery (ERS) */ | 
|  | static struct pci_error_handlers igbvf_err_handler = { | 
|  | .error_detected = igbvf_io_error_detected, | 
|  | .slot_reset = igbvf_io_slot_reset, | 
|  | .resume = igbvf_io_resume, | 
|  | }; | 
|  |  | 
|  | static DEFINE_PCI_DEVICE_TABLE(igbvf_pci_tbl) = { | 
|  | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_VF), board_vf }, | 
|  | { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_VF), board_i350_vf }, | 
|  | { } /* terminate list */ | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, igbvf_pci_tbl); | 
|  |  | 
|  | /* PCI Device API Driver */ | 
|  | static struct pci_driver igbvf_driver = { | 
|  | .name     = igbvf_driver_name, | 
|  | .id_table = igbvf_pci_tbl, | 
|  | .probe    = igbvf_probe, | 
|  | .remove   = __devexit_p(igbvf_remove), | 
|  | #ifdef CONFIG_PM | 
|  | /* Power Management Hooks */ | 
|  | .suspend  = igbvf_suspend, | 
|  | .resume   = igbvf_resume, | 
|  | #endif | 
|  | .shutdown = igbvf_shutdown, | 
|  | .err_handler = &igbvf_err_handler | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * igbvf_init_module - Driver Registration Routine | 
|  | * | 
|  | * igbvf_init_module is the first routine called when the driver is | 
|  | * loaded. All it does is register with the PCI subsystem. | 
|  | **/ | 
|  | static int __init igbvf_init_module(void) | 
|  | { | 
|  | int ret; | 
|  | printk(KERN_INFO "%s - version %s\n", | 
|  | igbvf_driver_string, igbvf_driver_version); | 
|  | printk(KERN_INFO "%s\n", igbvf_copyright); | 
|  |  | 
|  | ret = pci_register_driver(&igbvf_driver); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | module_init(igbvf_init_module); | 
|  |  | 
|  | /** | 
|  | * igbvf_exit_module - Driver Exit Cleanup Routine | 
|  | * | 
|  | * igbvf_exit_module is called just before the driver is removed | 
|  | * from memory. | 
|  | **/ | 
|  | static void __exit igbvf_exit_module(void) | 
|  | { | 
|  | pci_unregister_driver(&igbvf_driver); | 
|  | } | 
|  | module_exit(igbvf_exit_module); | 
|  |  | 
|  |  | 
|  | MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>"); | 
|  | MODULE_DESCRIPTION("Intel(R) 82576 Virtual Function Network Driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(DRV_VERSION); | 
|  |  | 
|  | /* netdev.c */ |