|  | /* | 
|  | * linux/arch/arm/mach-at91/board-csb637.c | 
|  | * | 
|  | *  Copyright (C) 2005 SAN People | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  | */ | 
|  |  | 
|  | #include <linux/types.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/mtd/physmap.h> | 
|  |  | 
|  | #include <asm/setup.h> | 
|  | #include <asm/mach-types.h> | 
|  | #include <asm/irq.h> | 
|  |  | 
|  | #include <asm/mach/arch.h> | 
|  | #include <asm/mach/map.h> | 
|  | #include <asm/mach/irq.h> | 
|  |  | 
|  | #include <mach/hardware.h> | 
|  | #include <mach/board.h> | 
|  | #include <mach/gpio.h> | 
|  |  | 
|  | #include "generic.h" | 
|  |  | 
|  |  | 
|  | static void __init csb637_init_early(void) | 
|  | { | 
|  | /* Initialize processor: 3.6864 MHz crystal */ | 
|  | at91rm9200_initialize(3686400); | 
|  |  | 
|  | /* DBGU on ttyS0. (Rx & Tx only) */ | 
|  | at91_register_uart(0, 0, 0); | 
|  |  | 
|  | /* make console=ttyS0 (ie, DBGU) the default */ | 
|  | at91_set_serial_console(0); | 
|  | } | 
|  |  | 
|  | static void __init csb637_init_irq(void) | 
|  | { | 
|  | at91rm9200_init_interrupts(NULL); | 
|  | } | 
|  |  | 
|  | static struct at91_eth_data __initdata csb637_eth_data = { | 
|  | .phy_irq_pin	= AT91_PIN_PC0, | 
|  | .is_rmii	= 0, | 
|  | }; | 
|  |  | 
|  | static struct at91_usbh_data __initdata csb637_usbh_data = { | 
|  | .ports		= 2, | 
|  | }; | 
|  |  | 
|  | static struct at91_udc_data __initdata csb637_udc_data = { | 
|  | .vbus_pin     = AT91_PIN_PB28, | 
|  | .pullup_pin   = AT91_PIN_PB1, | 
|  | }; | 
|  |  | 
|  | #define CSB_FLASH_BASE	AT91_CHIPSELECT_0 | 
|  | #define CSB_FLASH_SIZE	SZ_16M | 
|  |  | 
|  | static struct mtd_partition csb_flash_partitions[] = { | 
|  | { | 
|  | .name		= "uMON flash", | 
|  | .offset		= 0, | 
|  | .size		= MTDPART_SIZ_FULL, | 
|  | .mask_flags	= MTD_WRITEABLE,	/* read only */ | 
|  | } | 
|  | }; | 
|  |  | 
|  | static struct physmap_flash_data csb_flash_data = { | 
|  | .width		= 2, | 
|  | .parts		= csb_flash_partitions, | 
|  | .nr_parts	= ARRAY_SIZE(csb_flash_partitions), | 
|  | }; | 
|  |  | 
|  | static struct resource csb_flash_resources[] = { | 
|  | { | 
|  | .start	= CSB_FLASH_BASE, | 
|  | .end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static struct platform_device csb_flash = { | 
|  | .name		= "physmap-flash", | 
|  | .id		= 0, | 
|  | .dev		= { | 
|  | .platform_data = &csb_flash_data, | 
|  | }, | 
|  | .resource	= csb_flash_resources, | 
|  | .num_resources	= ARRAY_SIZE(csb_flash_resources), | 
|  | }; | 
|  |  | 
|  | static struct gpio_led csb_leds[] = { | 
|  | {	/* "d1", red */ | 
|  | .name			= "d1", | 
|  | .gpio			= AT91_PIN_PB2, | 
|  | .active_low		= 1, | 
|  | .default_trigger	= "heartbeat", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static void __init csb637_board_init(void) | 
|  | { | 
|  | /* LED(s) */ | 
|  | at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds)); | 
|  | /* Serial */ | 
|  | at91_add_device_serial(); | 
|  | /* Ethernet */ | 
|  | at91_add_device_eth(&csb637_eth_data); | 
|  | /* USB Host */ | 
|  | at91_add_device_usbh(&csb637_usbh_data); | 
|  | /* USB Device */ | 
|  | at91_add_device_udc(&csb637_udc_data); | 
|  | /* I2C */ | 
|  | at91_add_device_i2c(NULL, 0); | 
|  | /* SPI */ | 
|  | at91_add_device_spi(NULL, 0); | 
|  | /* NOR flash */ | 
|  | platform_device_register(&csb_flash); | 
|  | } | 
|  |  | 
|  | MACHINE_START(CSB637, "Cogent CSB637") | 
|  | /* Maintainer: Bill Gatliff */ | 
|  | .timer		= &at91rm9200_timer, | 
|  | .map_io		= at91rm9200_map_io, | 
|  | .init_early	= csb637_init_early, | 
|  | .init_irq	= csb637_init_irq, | 
|  | .init_machine	= csb637_board_init, | 
|  | MACHINE_END |