| /* | 
 |  * OMAP hardware spinlock driver | 
 |  * | 
 |  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com | 
 |  * | 
 |  * Contact: Simon Que <sque@ti.com> | 
 |  *          Hari Kanigeri <h-kanigeri2@ti.com> | 
 |  *          Ohad Ben-Cohen <ohad@wizery.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * General Public License for more details. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/device.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/io.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/pm_runtime.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/hwspinlock.h> | 
 | #include <linux/platform_device.h> | 
 |  | 
 | #include "hwspinlock_internal.h" | 
 |  | 
 | /* Spinlock register offsets */ | 
 | #define SYSSTATUS_OFFSET		0x0014 | 
 | #define LOCK_BASE_OFFSET		0x0800 | 
 |  | 
 | #define SPINLOCK_NUMLOCKS_BIT_OFFSET	(24) | 
 |  | 
 | /* Possible values of SPINLOCK_LOCK_REG */ | 
 | #define SPINLOCK_NOTTAKEN		(0)	/* free */ | 
 | #define SPINLOCK_TAKEN			(1)	/* locked */ | 
 |  | 
 | #define to_omap_hwspinlock(lock)	\ | 
 | 	container_of(lock, struct omap_hwspinlock, lock) | 
 |  | 
 | struct omap_hwspinlock { | 
 | 	struct hwspinlock lock; | 
 | 	void __iomem *addr; | 
 | }; | 
 |  | 
 | struct omap_hwspinlock_state { | 
 | 	int num_locks;			/* Total number of locks in system */ | 
 | 	void __iomem *io_base;		/* Mapped base address */ | 
 | }; | 
 |  | 
 | static int omap_hwspinlock_trylock(struct hwspinlock *lock) | 
 | { | 
 | 	struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock); | 
 |  | 
 | 	/* attempt to acquire the lock by reading its value */ | 
 | 	return (SPINLOCK_NOTTAKEN == readl(omap_lock->addr)); | 
 | } | 
 |  | 
 | static void omap_hwspinlock_unlock(struct hwspinlock *lock) | 
 | { | 
 | 	struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock); | 
 |  | 
 | 	/* release the lock by writing 0 to it */ | 
 | 	writel(SPINLOCK_NOTTAKEN, omap_lock->addr); | 
 | } | 
 |  | 
 | /* | 
 |  * relax the OMAP interconnect while spinning on it. | 
 |  * | 
 |  * The specs recommended that the retry delay time will be | 
 |  * just over half of the time that a requester would be | 
 |  * expected to hold the lock. | 
 |  * | 
 |  * The number below is taken from an hardware specs example, | 
 |  * obviously it is somewhat arbitrary. | 
 |  */ | 
 | static void omap_hwspinlock_relax(struct hwspinlock *lock) | 
 | { | 
 | 	ndelay(50); | 
 | } | 
 |  | 
 | static const struct hwspinlock_ops omap_hwspinlock_ops = { | 
 | 	.trylock = omap_hwspinlock_trylock, | 
 | 	.unlock = omap_hwspinlock_unlock, | 
 | 	.relax = omap_hwspinlock_relax, | 
 | }; | 
 |  | 
 | static int __devinit omap_hwspinlock_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct omap_hwspinlock *omap_lock; | 
 | 	struct omap_hwspinlock_state *state; | 
 | 	struct hwspinlock *lock; | 
 | 	struct resource *res; | 
 | 	void __iomem *io_base; | 
 | 	int i, ret; | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	if (!res) | 
 | 		return -ENODEV; | 
 |  | 
 | 	state = kzalloc(sizeof(*state), GFP_KERNEL); | 
 | 	if (!state) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	io_base = ioremap(res->start, resource_size(res)); | 
 | 	if (!io_base) { | 
 | 		ret = -ENOMEM; | 
 | 		goto free_state; | 
 | 	} | 
 |  | 
 | 	/* Determine number of locks */ | 
 | 	i = readl(io_base + SYSSTATUS_OFFSET); | 
 | 	i >>= SPINLOCK_NUMLOCKS_BIT_OFFSET; | 
 |  | 
 | 	/* one of the four lsb's must be set, and nothing else */ | 
 | 	if (hweight_long(i & 0xf) != 1 || i > 8) { | 
 | 		ret = -EINVAL; | 
 | 		goto iounmap_base; | 
 | 	} | 
 |  | 
 | 	state->num_locks = i * 32; | 
 | 	state->io_base = io_base; | 
 |  | 
 | 	platform_set_drvdata(pdev, state); | 
 |  | 
 | 	/* | 
 | 	 * runtime PM will make sure the clock of this module is | 
 | 	 * enabled iff at least one lock is requested | 
 | 	 */ | 
 | 	pm_runtime_enable(&pdev->dev); | 
 |  | 
 | 	for (i = 0; i < state->num_locks; i++) { | 
 | 		omap_lock = kzalloc(sizeof(*omap_lock), GFP_KERNEL); | 
 | 		if (!omap_lock) { | 
 | 			ret = -ENOMEM; | 
 | 			goto free_locks; | 
 | 		} | 
 |  | 
 | 		omap_lock->lock.dev = &pdev->dev; | 
 | 		omap_lock->lock.owner = THIS_MODULE; | 
 | 		omap_lock->lock.id = i; | 
 | 		omap_lock->lock.ops = &omap_hwspinlock_ops; | 
 | 		omap_lock->addr = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i; | 
 |  | 
 | 		ret = hwspin_lock_register(&omap_lock->lock); | 
 | 		if (ret) { | 
 | 			kfree(omap_lock); | 
 | 			goto free_locks; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | free_locks: | 
 | 	while (--i >= 0) { | 
 | 		lock = hwspin_lock_unregister(i); | 
 | 		/* this should't happen, but let's give our best effort */ | 
 | 		if (!lock) { | 
 | 			dev_err(&pdev->dev, "%s: cleanups failed\n", __func__); | 
 | 			continue; | 
 | 		} | 
 | 		omap_lock = to_omap_hwspinlock(lock); | 
 | 		kfree(omap_lock); | 
 | 	} | 
 | 	pm_runtime_disable(&pdev->dev); | 
 | iounmap_base: | 
 | 	iounmap(io_base); | 
 | free_state: | 
 | 	kfree(state); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int omap_hwspinlock_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct omap_hwspinlock_state *state = platform_get_drvdata(pdev); | 
 | 	struct hwspinlock *lock; | 
 | 	struct omap_hwspinlock *omap_lock; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < state->num_locks; i++) { | 
 | 		lock = hwspin_lock_unregister(i); | 
 | 		/* this shouldn't happen at this point. if it does, at least | 
 | 		 * don't continue with the remove */ | 
 | 		if (!lock) { | 
 | 			dev_err(&pdev->dev, "%s: failed on %d\n", __func__, i); | 
 | 			return -EBUSY; | 
 | 		} | 
 |  | 
 | 		omap_lock = to_omap_hwspinlock(lock); | 
 | 		kfree(omap_lock); | 
 | 	} | 
 |  | 
 | 	pm_runtime_disable(&pdev->dev); | 
 | 	iounmap(state->io_base); | 
 | 	kfree(state); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver omap_hwspinlock_driver = { | 
 | 	.probe		= omap_hwspinlock_probe, | 
 | 	.remove		= omap_hwspinlock_remove, | 
 | 	.driver		= { | 
 | 		.name	= "omap_hwspinlock", | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init omap_hwspinlock_init(void) | 
 | { | 
 | 	return platform_driver_register(&omap_hwspinlock_driver); | 
 | } | 
 | /* board init code might need to reserve hwspinlocks for predefined purposes */ | 
 | postcore_initcall(omap_hwspinlock_init); | 
 |  | 
 | static void __exit omap_hwspinlock_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&omap_hwspinlock_driver); | 
 | } | 
 | module_exit(omap_hwspinlock_exit); | 
 |  | 
 | MODULE_LICENSE("GPL v2"); | 
 | MODULE_DESCRIPTION("Hardware spinlock driver for OMAP"); | 
 | MODULE_AUTHOR("Simon Que <sque@ti.com>"); | 
 | MODULE_AUTHOR("Hari Kanigeri <h-kanigeri2@ti.com>"); | 
 | MODULE_AUTHOR("Ohad Ben-Cohen <ohad@wizery.com>"); |