|  | /* | 
|  | * | 
|  | *  Driver for the 3Com Bluetooth PCMCIA card | 
|  | * | 
|  | *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org> | 
|  | *                           Jose Orlando Pereira <jop@di.uminho.pt> | 
|  | * | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License version 2 as | 
|  | *  published by the Free Software Foundation; | 
|  | * | 
|  | *  Software distributed under the License is distributed on an "AS | 
|  | *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | 
|  | *  implied. See the License for the specific language governing | 
|  | *  rights and limitations under the License. | 
|  | * | 
|  | *  The initial developer of the original code is David A. Hinds | 
|  | *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds | 
|  | *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/ptrace.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/moduleparam.h> | 
|  |  | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/serial.h> | 
|  | #include <linux/serial_reg.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <asm/system.h> | 
|  | #include <asm/io.h> | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/firmware.h> | 
|  |  | 
|  | #include <pcmcia/cistpl.h> | 
|  | #include <pcmcia/ciscode.h> | 
|  | #include <pcmcia/ds.h> | 
|  | #include <pcmcia/cisreg.h> | 
|  |  | 
|  | #include <net/bluetooth/bluetooth.h> | 
|  | #include <net/bluetooth/hci_core.h> | 
|  |  | 
|  |  | 
|  |  | 
|  | /* ======================== Module parameters ======================== */ | 
|  |  | 
|  |  | 
|  | MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); | 
|  | MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_FIRMWARE("BT3CPCC.bin"); | 
|  |  | 
|  |  | 
|  |  | 
|  | /* ======================== Local structures ======================== */ | 
|  |  | 
|  |  | 
|  | typedef struct bt3c_info_t { | 
|  | struct pcmcia_device *p_dev; | 
|  |  | 
|  | struct hci_dev *hdev; | 
|  |  | 
|  | spinlock_t lock;		/* For serializing operations */ | 
|  |  | 
|  | struct sk_buff_head txq; | 
|  | unsigned long tx_state; | 
|  |  | 
|  | unsigned long rx_state; | 
|  | unsigned long rx_count; | 
|  | struct sk_buff *rx_skb; | 
|  | } bt3c_info_t; | 
|  |  | 
|  |  | 
|  | static int bt3c_config(struct pcmcia_device *link); | 
|  | static void bt3c_release(struct pcmcia_device *link); | 
|  |  | 
|  | static void bt3c_detach(struct pcmcia_device *p_dev); | 
|  |  | 
|  |  | 
|  | /* Transmit states  */ | 
|  | #define XMIT_SENDING  1 | 
|  | #define XMIT_WAKEUP   2 | 
|  | #define XMIT_WAITING  8 | 
|  |  | 
|  | /* Receiver states */ | 
|  | #define RECV_WAIT_PACKET_TYPE   0 | 
|  | #define RECV_WAIT_EVENT_HEADER  1 | 
|  | #define RECV_WAIT_ACL_HEADER    2 | 
|  | #define RECV_WAIT_SCO_HEADER    3 | 
|  | #define RECV_WAIT_DATA          4 | 
|  |  | 
|  |  | 
|  |  | 
|  | /* ======================== Special I/O functions ======================== */ | 
|  |  | 
|  |  | 
|  | #define DATA_L   0 | 
|  | #define DATA_H   1 | 
|  | #define ADDR_L   2 | 
|  | #define ADDR_H   3 | 
|  | #define CONTROL  4 | 
|  |  | 
|  |  | 
|  | static inline void bt3c_address(unsigned int iobase, unsigned short addr) | 
|  | { | 
|  | outb(addr & 0xff, iobase + ADDR_L); | 
|  | outb((addr >> 8) & 0xff, iobase + ADDR_H); | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline void bt3c_put(unsigned int iobase, unsigned short value) | 
|  | { | 
|  | outb(value & 0xff, iobase + DATA_L); | 
|  | outb((value >> 8) & 0xff, iobase + DATA_H); | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline void bt3c_io_write(unsigned int iobase, unsigned short addr, unsigned short value) | 
|  | { | 
|  | bt3c_address(iobase, addr); | 
|  | bt3c_put(iobase, value); | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline unsigned short bt3c_get(unsigned int iobase) | 
|  | { | 
|  | unsigned short value = inb(iobase + DATA_L); | 
|  |  | 
|  | value |= inb(iobase + DATA_H) << 8; | 
|  |  | 
|  | return value; | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline unsigned short bt3c_read(unsigned int iobase, unsigned short addr) | 
|  | { | 
|  | bt3c_address(iobase, addr); | 
|  |  | 
|  | return bt3c_get(iobase); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /* ======================== Interrupt handling ======================== */ | 
|  |  | 
|  |  | 
|  | static int bt3c_write(unsigned int iobase, int fifo_size, __u8 *buf, int len) | 
|  | { | 
|  | int actual = 0; | 
|  |  | 
|  | bt3c_address(iobase, 0x7080); | 
|  |  | 
|  | /* Fill FIFO with current frame */ | 
|  | while (actual < len) { | 
|  | /* Transmit next byte */ | 
|  | bt3c_put(iobase, buf[actual]); | 
|  | actual++; | 
|  | } | 
|  |  | 
|  | bt3c_io_write(iobase, 0x7005, actual); | 
|  |  | 
|  | return actual; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void bt3c_write_wakeup(bt3c_info_t *info) | 
|  | { | 
|  | if (!info) { | 
|  | BT_ERR("Unknown device"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) | 
|  | return; | 
|  |  | 
|  | do { | 
|  | register unsigned int iobase = info->p_dev->resource[0]->start; | 
|  | register struct sk_buff *skb; | 
|  | register int len; | 
|  |  | 
|  | if (!pcmcia_dev_present(info->p_dev)) | 
|  | break; | 
|  |  | 
|  |  | 
|  | if (!(skb = skb_dequeue(&(info->txq)))) { | 
|  | clear_bit(XMIT_SENDING, &(info->tx_state)); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Send frame */ | 
|  | len = bt3c_write(iobase, 256, skb->data, skb->len); | 
|  |  | 
|  | if (len != skb->len) { | 
|  | BT_ERR("Very strange"); | 
|  | } | 
|  |  | 
|  | kfree_skb(skb); | 
|  |  | 
|  | info->hdev->stat.byte_tx += len; | 
|  |  | 
|  | } while (0); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void bt3c_receive(bt3c_info_t *info) | 
|  | { | 
|  | unsigned int iobase; | 
|  | int size = 0, avail; | 
|  |  | 
|  | if (!info) { | 
|  | BT_ERR("Unknown device"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | iobase = info->p_dev->resource[0]->start; | 
|  |  | 
|  | avail = bt3c_read(iobase, 0x7006); | 
|  | //printk("bt3c_cs: receiving %d bytes\n", avail); | 
|  |  | 
|  | bt3c_address(iobase, 0x7480); | 
|  | while (size < avail) { | 
|  | size++; | 
|  | info->hdev->stat.byte_rx++; | 
|  |  | 
|  | /* Allocate packet */ | 
|  | if (info->rx_skb == NULL) { | 
|  | info->rx_state = RECV_WAIT_PACKET_TYPE; | 
|  | info->rx_count = 0; | 
|  | if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) { | 
|  | BT_ERR("Can't allocate mem for new packet"); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | if (info->rx_state == RECV_WAIT_PACKET_TYPE) { | 
|  |  | 
|  | info->rx_skb->dev = (void *) info->hdev; | 
|  | bt_cb(info->rx_skb)->pkt_type = inb(iobase + DATA_L); | 
|  | inb(iobase + DATA_H); | 
|  | //printk("bt3c: PACKET_TYPE=%02x\n", bt_cb(info->rx_skb)->pkt_type); | 
|  |  | 
|  | switch (bt_cb(info->rx_skb)->pkt_type) { | 
|  |  | 
|  | case HCI_EVENT_PKT: | 
|  | info->rx_state = RECV_WAIT_EVENT_HEADER; | 
|  | info->rx_count = HCI_EVENT_HDR_SIZE; | 
|  | break; | 
|  |  | 
|  | case HCI_ACLDATA_PKT: | 
|  | info->rx_state = RECV_WAIT_ACL_HEADER; | 
|  | info->rx_count = HCI_ACL_HDR_SIZE; | 
|  | break; | 
|  |  | 
|  | case HCI_SCODATA_PKT: | 
|  | info->rx_state = RECV_WAIT_SCO_HEADER; | 
|  | info->rx_count = HCI_SCO_HDR_SIZE; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | /* Unknown packet */ | 
|  | BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type); | 
|  | info->hdev->stat.err_rx++; | 
|  | clear_bit(HCI_RUNNING, &(info->hdev->flags)); | 
|  |  | 
|  | kfree_skb(info->rx_skb); | 
|  | info->rx_skb = NULL; | 
|  | break; | 
|  |  | 
|  | } | 
|  |  | 
|  | } else { | 
|  |  | 
|  | __u8 x = inb(iobase + DATA_L); | 
|  |  | 
|  | *skb_put(info->rx_skb, 1) = x; | 
|  | inb(iobase + DATA_H); | 
|  | info->rx_count--; | 
|  |  | 
|  | if (info->rx_count == 0) { | 
|  |  | 
|  | int dlen; | 
|  | struct hci_event_hdr *eh; | 
|  | struct hci_acl_hdr *ah; | 
|  | struct hci_sco_hdr *sh; | 
|  |  | 
|  | switch (info->rx_state) { | 
|  |  | 
|  | case RECV_WAIT_EVENT_HEADER: | 
|  | eh = hci_event_hdr(info->rx_skb); | 
|  | info->rx_state = RECV_WAIT_DATA; | 
|  | info->rx_count = eh->plen; | 
|  | break; | 
|  |  | 
|  | case RECV_WAIT_ACL_HEADER: | 
|  | ah = hci_acl_hdr(info->rx_skb); | 
|  | dlen = __le16_to_cpu(ah->dlen); | 
|  | info->rx_state = RECV_WAIT_DATA; | 
|  | info->rx_count = dlen; | 
|  | break; | 
|  |  | 
|  | case RECV_WAIT_SCO_HEADER: | 
|  | sh = hci_sco_hdr(info->rx_skb); | 
|  | info->rx_state = RECV_WAIT_DATA; | 
|  | info->rx_count = sh->dlen; | 
|  | break; | 
|  |  | 
|  | case RECV_WAIT_DATA: | 
|  | hci_recv_frame(info->rx_skb); | 
|  | info->rx_skb = NULL; | 
|  | break; | 
|  |  | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | bt3c_io_write(iobase, 0x7006, 0x0000); | 
|  | } | 
|  |  | 
|  |  | 
|  | static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) | 
|  | { | 
|  | bt3c_info_t *info = dev_inst; | 
|  | unsigned int iobase; | 
|  | int iir; | 
|  | irqreturn_t r = IRQ_NONE; | 
|  |  | 
|  | if (!info || !info->hdev) | 
|  | /* our irq handler is shared */ | 
|  | return IRQ_NONE; | 
|  |  | 
|  | iobase = info->p_dev->resource[0]->start; | 
|  |  | 
|  | spin_lock(&(info->lock)); | 
|  |  | 
|  | iir = inb(iobase + CONTROL); | 
|  | if (iir & 0x80) { | 
|  | int stat = bt3c_read(iobase, 0x7001); | 
|  |  | 
|  | if ((stat & 0xff) == 0x7f) { | 
|  | BT_ERR("Very strange (stat=0x%04x)", stat); | 
|  | } else if ((stat & 0xff) != 0xff) { | 
|  | if (stat & 0x0020) { | 
|  | int status = bt3c_read(iobase, 0x7002) & 0x10; | 
|  | BT_INFO("%s: Antenna %s", info->hdev->name, | 
|  | status ? "out" : "in"); | 
|  | } | 
|  | if (stat & 0x0001) | 
|  | bt3c_receive(info); | 
|  | if (stat & 0x0002) { | 
|  | //BT_ERR("Ack (stat=0x%04x)", stat); | 
|  | clear_bit(XMIT_SENDING, &(info->tx_state)); | 
|  | bt3c_write_wakeup(info); | 
|  | } | 
|  |  | 
|  | bt3c_io_write(iobase, 0x7001, 0x0000); | 
|  |  | 
|  | outb(iir, iobase + CONTROL); | 
|  | } | 
|  | r = IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | spin_unlock(&(info->lock)); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /* ======================== HCI interface ======================== */ | 
|  |  | 
|  |  | 
|  | static int bt3c_hci_flush(struct hci_dev *hdev) | 
|  | { | 
|  | bt3c_info_t *info = (bt3c_info_t *)(hdev->driver_data); | 
|  |  | 
|  | /* Drop TX queue */ | 
|  | skb_queue_purge(&(info->txq)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_hci_open(struct hci_dev *hdev) | 
|  | { | 
|  | set_bit(HCI_RUNNING, &(hdev->flags)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_hci_close(struct hci_dev *hdev) | 
|  | { | 
|  | if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags))) | 
|  | return 0; | 
|  |  | 
|  | bt3c_hci_flush(hdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_hci_send_frame(struct sk_buff *skb) | 
|  | { | 
|  | bt3c_info_t *info; | 
|  | struct hci_dev *hdev = (struct hci_dev *)(skb->dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!hdev) { | 
|  | BT_ERR("Frame for unknown HCI device (hdev=NULL)"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | info = (bt3c_info_t *) (hdev->driver_data); | 
|  |  | 
|  | switch (bt_cb(skb)->pkt_type) { | 
|  | case HCI_COMMAND_PKT: | 
|  | hdev->stat.cmd_tx++; | 
|  | break; | 
|  | case HCI_ACLDATA_PKT: | 
|  | hdev->stat.acl_tx++; | 
|  | break; | 
|  | case HCI_SCODATA_PKT: | 
|  | hdev->stat.sco_tx++; | 
|  | break; | 
|  | }; | 
|  |  | 
|  | /* Prepend skb with frame type */ | 
|  | memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); | 
|  | skb_queue_tail(&(info->txq), skb); | 
|  |  | 
|  | spin_lock_irqsave(&(info->lock), flags); | 
|  |  | 
|  | bt3c_write_wakeup(info); | 
|  |  | 
|  | spin_unlock_irqrestore(&(info->lock), flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void bt3c_hci_destruct(struct hci_dev *hdev) | 
|  | { | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | return -ENOIOCTLCMD; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /* ======================== Card services HCI interaction ======================== */ | 
|  |  | 
|  |  | 
|  | static int bt3c_load_firmware(bt3c_info_t *info, const unsigned char *firmware, | 
|  | int count) | 
|  | { | 
|  | char *ptr = (char *) firmware; | 
|  | char b[9]; | 
|  | unsigned int iobase, size, addr, fcs, tmp; | 
|  | int i, err = 0; | 
|  |  | 
|  | iobase = info->p_dev->resource[0]->start; | 
|  |  | 
|  | /* Reset */ | 
|  | bt3c_io_write(iobase, 0x8040, 0x0404); | 
|  | bt3c_io_write(iobase, 0x8040, 0x0400); | 
|  |  | 
|  | udelay(1); | 
|  |  | 
|  | bt3c_io_write(iobase, 0x8040, 0x0404); | 
|  |  | 
|  | udelay(17); | 
|  |  | 
|  | /* Load */ | 
|  | while (count) { | 
|  | if (ptr[0] != 'S') { | 
|  | BT_ERR("Bad address in firmware"); | 
|  | err = -EFAULT; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | memset(b, 0, sizeof(b)); | 
|  | memcpy(b, ptr + 2, 2); | 
|  | size = simple_strtoul(b, NULL, 16); | 
|  |  | 
|  | memset(b, 0, sizeof(b)); | 
|  | memcpy(b, ptr + 4, 8); | 
|  | addr = simple_strtoul(b, NULL, 16); | 
|  |  | 
|  | memset(b, 0, sizeof(b)); | 
|  | memcpy(b, ptr + (size * 2) + 2, 2); | 
|  | fcs = simple_strtoul(b, NULL, 16); | 
|  |  | 
|  | memset(b, 0, sizeof(b)); | 
|  | for (tmp = 0, i = 0; i < size; i++) { | 
|  | memcpy(b, ptr + (i * 2) + 2, 2); | 
|  | tmp += simple_strtol(b, NULL, 16); | 
|  | } | 
|  |  | 
|  | if (((tmp + fcs) & 0xff) != 0xff) { | 
|  | BT_ERR("Checksum error in firmware"); | 
|  | err = -EILSEQ; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | if (ptr[1] == '3') { | 
|  | bt3c_address(iobase, addr); | 
|  |  | 
|  | memset(b, 0, sizeof(b)); | 
|  | for (i = 0; i < (size - 4) / 2; i++) { | 
|  | memcpy(b, ptr + (i * 4) + 12, 4); | 
|  | tmp = simple_strtoul(b, NULL, 16); | 
|  | bt3c_put(iobase, tmp); | 
|  | } | 
|  | } | 
|  |  | 
|  | ptr   += (size * 2) + 6; | 
|  | count -= (size * 2) + 6; | 
|  | } | 
|  |  | 
|  | udelay(17); | 
|  |  | 
|  | /* Boot */ | 
|  | bt3c_address(iobase, 0x3000); | 
|  | outb(inb(iobase + CONTROL) | 0x40, iobase + CONTROL); | 
|  |  | 
|  | error: | 
|  | udelay(17); | 
|  |  | 
|  | /* Clear */ | 
|  | bt3c_io_write(iobase, 0x7006, 0x0000); | 
|  | bt3c_io_write(iobase, 0x7005, 0x0000); | 
|  | bt3c_io_write(iobase, 0x7001, 0x0000); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_open(bt3c_info_t *info) | 
|  | { | 
|  | const struct firmware *firmware; | 
|  | struct hci_dev *hdev; | 
|  | int err; | 
|  |  | 
|  | spin_lock_init(&(info->lock)); | 
|  |  | 
|  | skb_queue_head_init(&(info->txq)); | 
|  |  | 
|  | info->rx_state = RECV_WAIT_PACKET_TYPE; | 
|  | info->rx_count = 0; | 
|  | info->rx_skb = NULL; | 
|  |  | 
|  | /* Initialize HCI device */ | 
|  | hdev = hci_alloc_dev(); | 
|  | if (!hdev) { | 
|  | BT_ERR("Can't allocate HCI device"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | info->hdev = hdev; | 
|  |  | 
|  | hdev->bus = HCI_PCCARD; | 
|  | hdev->driver_data = info; | 
|  | SET_HCIDEV_DEV(hdev, &info->p_dev->dev); | 
|  |  | 
|  | hdev->open     = bt3c_hci_open; | 
|  | hdev->close    = bt3c_hci_close; | 
|  | hdev->flush    = bt3c_hci_flush; | 
|  | hdev->send     = bt3c_hci_send_frame; | 
|  | hdev->destruct = bt3c_hci_destruct; | 
|  | hdev->ioctl    = bt3c_hci_ioctl; | 
|  |  | 
|  | hdev->owner = THIS_MODULE; | 
|  |  | 
|  | /* Load firmware */ | 
|  | err = request_firmware(&firmware, "BT3CPCC.bin", &info->p_dev->dev); | 
|  | if (err < 0) { | 
|  | BT_ERR("Firmware request failed"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | err = bt3c_load_firmware(info, firmware->data, firmware->size); | 
|  |  | 
|  | release_firmware(firmware); | 
|  |  | 
|  | if (err < 0) { | 
|  | BT_ERR("Firmware loading failed"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | /* Timeout before it is safe to send the first HCI packet */ | 
|  | msleep(1000); | 
|  |  | 
|  | /* Register HCI device */ | 
|  | err = hci_register_dev(hdev); | 
|  | if (err < 0) { | 
|  | BT_ERR("Can't register HCI device"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | error: | 
|  | info->hdev = NULL; | 
|  | hci_free_dev(hdev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int bt3c_close(bt3c_info_t *info) | 
|  | { | 
|  | struct hci_dev *hdev = info->hdev; | 
|  |  | 
|  | if (!hdev) | 
|  | return -ENODEV; | 
|  |  | 
|  | bt3c_hci_close(hdev); | 
|  |  | 
|  | if (hci_unregister_dev(hdev) < 0) | 
|  | BT_ERR("Can't unregister HCI device %s", hdev->name); | 
|  |  | 
|  | hci_free_dev(hdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bt3c_probe(struct pcmcia_device *link) | 
|  | { | 
|  | bt3c_info_t *info; | 
|  |  | 
|  | /* Create new info device */ | 
|  | info = kzalloc(sizeof(*info), GFP_KERNEL); | 
|  | if (!info) | 
|  | return -ENOMEM; | 
|  |  | 
|  | info->p_dev = link; | 
|  | link->priv = info; | 
|  |  | 
|  | link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | | 
|  | CONF_AUTO_SET_IO; | 
|  |  | 
|  | return bt3c_config(link); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void bt3c_detach(struct pcmcia_device *link) | 
|  | { | 
|  | bt3c_info_t *info = link->priv; | 
|  |  | 
|  | bt3c_release(link); | 
|  | kfree(info); | 
|  | } | 
|  |  | 
|  | static int bt3c_check_config(struct pcmcia_device *p_dev, void *priv_data) | 
|  | { | 
|  | int *try = priv_data; | 
|  |  | 
|  | if (try == 0) | 
|  | p_dev->io_lines = 16; | 
|  |  | 
|  | if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0)) | 
|  | return -EINVAL; | 
|  |  | 
|  | p_dev->resource[0]->end = 8; | 
|  | p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; | 
|  | p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; | 
|  |  | 
|  | return pcmcia_request_io(p_dev); | 
|  | } | 
|  |  | 
|  | static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev, | 
|  | void *priv_data) | 
|  | { | 
|  | static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; | 
|  | int j; | 
|  |  | 
|  | if (p_dev->io_lines > 3) | 
|  | return -ENODEV; | 
|  |  | 
|  | p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; | 
|  | p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; | 
|  | p_dev->resource[0]->end = 8; | 
|  |  | 
|  | for (j = 0; j < 5; j++) { | 
|  | p_dev->resource[0]->start = base[j]; | 
|  | p_dev->io_lines = base[j] ? 16 : 3; | 
|  | if (!pcmcia_request_io(p_dev)) | 
|  | return 0; | 
|  | } | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static int bt3c_config(struct pcmcia_device *link) | 
|  | { | 
|  | bt3c_info_t *info = link->priv; | 
|  | int i; | 
|  | unsigned long try; | 
|  |  | 
|  | /* First pass: look for a config entry that looks normal. | 
|  | Two tries: without IO aliases, then with aliases */ | 
|  | for (try = 0; try < 2; try++) | 
|  | if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try)) | 
|  | goto found_port; | 
|  |  | 
|  | /* Second pass: try to find an entry that isn't picky about | 
|  | its base address, then try to grab any standard serial port | 
|  | address, and finally try to get any free port. */ | 
|  | if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL)) | 
|  | goto found_port; | 
|  |  | 
|  | BT_ERR("No usable port range found"); | 
|  | goto failed; | 
|  |  | 
|  | found_port: | 
|  | i = pcmcia_request_irq(link, &bt3c_interrupt); | 
|  | if (i != 0) | 
|  | goto failed; | 
|  |  | 
|  | i = pcmcia_enable_device(link); | 
|  | if (i != 0) | 
|  | goto failed; | 
|  |  | 
|  | if (bt3c_open(info) != 0) | 
|  | goto failed; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | failed: | 
|  | bt3c_release(link); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void bt3c_release(struct pcmcia_device *link) | 
|  | { | 
|  | bt3c_info_t *info = link->priv; | 
|  |  | 
|  | bt3c_close(info); | 
|  |  | 
|  | pcmcia_disable_device(link); | 
|  | } | 
|  |  | 
|  |  | 
|  | static const struct pcmcia_device_id bt3c_ids[] = { | 
|  | PCMCIA_DEVICE_PROD_ID13("3COM", "Bluetooth PC Card", 0xefce0a31, 0xd4ce9b02), | 
|  | PCMCIA_DEVICE_NULL | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pcmcia, bt3c_ids); | 
|  |  | 
|  | static struct pcmcia_driver bt3c_driver = { | 
|  | .owner		= THIS_MODULE, | 
|  | .name		= "bt3c_cs", | 
|  | .probe		= bt3c_probe, | 
|  | .remove		= bt3c_detach, | 
|  | .id_table	= bt3c_ids, | 
|  | }; | 
|  |  | 
|  | static int __init init_bt3c_cs(void) | 
|  | { | 
|  | return pcmcia_register_driver(&bt3c_driver); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void __exit exit_bt3c_cs(void) | 
|  | { | 
|  | pcmcia_unregister_driver(&bt3c_driver); | 
|  | } | 
|  |  | 
|  | module_init(init_bt3c_cs); | 
|  | module_exit(exit_bt3c_cs); |