|  | /* | 
|  | * Copyright (C) ST-Ericsson SA 2010 | 
|  | * | 
|  | * License Terms: GNU General Public License, version 2 | 
|  | * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson | 
|  | * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/mfd/core.h> | 
|  | #include <linux/mfd/tc3589x.h> | 
|  |  | 
|  | #define TC3589x_CLKMODE_MODCTL_SLEEP		0x0 | 
|  | #define TC3589x_CLKMODE_MODCTL_OPERATION	(1 << 0) | 
|  |  | 
|  | /** | 
|  | * tc3589x_reg_read() - read a single TC3589x register | 
|  | * @tc3589x:	Device to read from | 
|  | * @reg:	Register to read | 
|  | */ | 
|  | int tc3589x_reg_read(struct tc3589x *tc3589x, u8 reg) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_smbus_read_byte_data(tc3589x->i2c, reg); | 
|  | if (ret < 0) | 
|  | dev_err(tc3589x->dev, "failed to read reg %#x: %d\n", | 
|  | reg, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(tc3589x_reg_read); | 
|  |  | 
|  | /** | 
|  | * tc3589x_reg_read() - write a single TC3589x register | 
|  | * @tc3589x:	Device to write to | 
|  | * @reg:	Register to read | 
|  | * @data:	Value to write | 
|  | */ | 
|  | int tc3589x_reg_write(struct tc3589x *tc3589x, u8 reg, u8 data) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_smbus_write_byte_data(tc3589x->i2c, reg, data); | 
|  | if (ret < 0) | 
|  | dev_err(tc3589x->dev, "failed to write reg %#x: %d\n", | 
|  | reg, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(tc3589x_reg_write); | 
|  |  | 
|  | /** | 
|  | * tc3589x_block_read() - read multiple TC3589x registers | 
|  | * @tc3589x:	Device to read from | 
|  | * @reg:	First register | 
|  | * @length:	Number of registers | 
|  | * @values:	Buffer to write to | 
|  | */ | 
|  | int tc3589x_block_read(struct tc3589x *tc3589x, u8 reg, u8 length, u8 *values) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_smbus_read_i2c_block_data(tc3589x->i2c, reg, length, values); | 
|  | if (ret < 0) | 
|  | dev_err(tc3589x->dev, "failed to read regs %#x: %d\n", | 
|  | reg, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(tc3589x_block_read); | 
|  |  | 
|  | /** | 
|  | * tc3589x_block_write() - write multiple TC3589x registers | 
|  | * @tc3589x:	Device to write to | 
|  | * @reg:	First register | 
|  | * @length:	Number of registers | 
|  | * @values:	Values to write | 
|  | */ | 
|  | int tc3589x_block_write(struct tc3589x *tc3589x, u8 reg, u8 length, | 
|  | const u8 *values) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_smbus_write_i2c_block_data(tc3589x->i2c, reg, length, | 
|  | values); | 
|  | if (ret < 0) | 
|  | dev_err(tc3589x->dev, "failed to write regs %#x: %d\n", | 
|  | reg, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(tc3589x_block_write); | 
|  |  | 
|  | /** | 
|  | * tc3589x_set_bits() - set the value of a bitfield in a TC3589x register | 
|  | * @tc3589x:	Device to write to | 
|  | * @reg:	Register to write | 
|  | * @mask:	Mask of bits to set | 
|  | * @values:	Value to set | 
|  | */ | 
|  | int tc3589x_set_bits(struct tc3589x *tc3589x, u8 reg, u8 mask, u8 val) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&tc3589x->lock); | 
|  |  | 
|  | ret = tc3589x_reg_read(tc3589x, reg); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | ret &= ~mask; | 
|  | ret |= val; | 
|  |  | 
|  | ret = tc3589x_reg_write(tc3589x, reg, ret); | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&tc3589x->lock); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(tc3589x_set_bits); | 
|  |  | 
|  | static struct resource gpio_resources[] = { | 
|  | { | 
|  | .start	= TC3589x_INT_GPIIRQ, | 
|  | .end	= TC3589x_INT_GPIIRQ, | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct resource keypad_resources[] = { | 
|  | { | 
|  | .start  = TC3589x_INT_KBDIRQ, | 
|  | .end    = TC3589x_INT_KBDIRQ, | 
|  | .flags  = IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct mfd_cell tc3589x_dev_gpio[] = { | 
|  | { | 
|  | .name		= "tc3589x-gpio", | 
|  | .num_resources	= ARRAY_SIZE(gpio_resources), | 
|  | .resources	= &gpio_resources[0], | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct mfd_cell tc3589x_dev_keypad[] = { | 
|  | { | 
|  | .name           = "tc3589x-keypad", | 
|  | .num_resources  = ARRAY_SIZE(keypad_resources), | 
|  | .resources      = &keypad_resources[0], | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static irqreturn_t tc3589x_irq(int irq, void *data) | 
|  | { | 
|  | struct tc3589x *tc3589x = data; | 
|  | int status; | 
|  |  | 
|  | again: | 
|  | status = tc3589x_reg_read(tc3589x, TC3589x_IRQST); | 
|  | if (status < 0) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | while (status) { | 
|  | int bit = __ffs(status); | 
|  |  | 
|  | handle_nested_irq(tc3589x->irq_base + bit); | 
|  | status &= ~(1 << bit); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * A dummy read or write (to any register) appears to be necessary to | 
|  | * have the last interrupt clear (for example, GPIO IC write) take | 
|  | * effect. In such a case, recheck for any interrupt which is still | 
|  | * pending. | 
|  | */ | 
|  | status = tc3589x_reg_read(tc3589x, TC3589x_IRQST); | 
|  | if (status) | 
|  | goto again; | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int tc3589x_irq_init(struct tc3589x *tc3589x) | 
|  | { | 
|  | int base = tc3589x->irq_base; | 
|  | int irq; | 
|  |  | 
|  | for (irq = base; irq < base + TC3589x_NR_INTERNAL_IRQS; irq++) { | 
|  | irq_set_chip_data(irq, tc3589x); | 
|  | irq_set_chip_and_handler(irq, &dummy_irq_chip, | 
|  | handle_edge_irq); | 
|  | irq_set_nested_thread(irq, 1); | 
|  | #ifdef CONFIG_ARM | 
|  | set_irq_flags(irq, IRQF_VALID); | 
|  | #else | 
|  | irq_set_noprobe(irq); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void tc3589x_irq_remove(struct tc3589x *tc3589x) | 
|  | { | 
|  | int base = tc3589x->irq_base; | 
|  | int irq; | 
|  |  | 
|  | for (irq = base; irq < base + TC3589x_NR_INTERNAL_IRQS; irq++) { | 
|  | #ifdef CONFIG_ARM | 
|  | set_irq_flags(irq, 0); | 
|  | #endif | 
|  | irq_set_chip_and_handler(irq, NULL, NULL); | 
|  | irq_set_chip_data(irq, NULL); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int tc3589x_chip_init(struct tc3589x *tc3589x) | 
|  | { | 
|  | int manf, ver, ret; | 
|  |  | 
|  | manf = tc3589x_reg_read(tc3589x, TC3589x_MANFCODE); | 
|  | if (manf < 0) | 
|  | return manf; | 
|  |  | 
|  | ver = tc3589x_reg_read(tc3589x, TC3589x_VERSION); | 
|  | if (ver < 0) | 
|  | return ver; | 
|  |  | 
|  | if (manf != TC3589x_MANFCODE_MAGIC) { | 
|  | dev_err(tc3589x->dev, "unknown manufacturer: %#x\n", manf); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | dev_info(tc3589x->dev, "manufacturer: %#x, version: %#x\n", manf, ver); | 
|  |  | 
|  | /* | 
|  | * Put everything except the IRQ module into reset; | 
|  | * also spare the GPIO module for any pin initialization | 
|  | * done during pre-kernel boot | 
|  | */ | 
|  | ret = tc3589x_reg_write(tc3589x, TC3589x_RSTCTRL, | 
|  | TC3589x_RSTCTRL_TIMRST | 
|  | | TC3589x_RSTCTRL_ROTRST | 
|  | | TC3589x_RSTCTRL_KBDRST); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* Clear the reset interrupt. */ | 
|  | return tc3589x_reg_write(tc3589x, TC3589x_RSTINTCLR, 0x1); | 
|  | } | 
|  |  | 
|  | static int __devinit tc3589x_device_init(struct tc3589x *tc3589x) | 
|  | { | 
|  | int ret = 0; | 
|  | unsigned int blocks = tc3589x->pdata->block; | 
|  |  | 
|  | if (blocks & TC3589x_BLOCK_GPIO) { | 
|  | ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio, | 
|  | ARRAY_SIZE(tc3589x_dev_gpio), NULL, | 
|  | tc3589x->irq_base); | 
|  | if (ret) { | 
|  | dev_err(tc3589x->dev, "failed to add gpio child\n"); | 
|  | return ret; | 
|  | } | 
|  | dev_info(tc3589x->dev, "added gpio block\n"); | 
|  | } | 
|  |  | 
|  | if (blocks & TC3589x_BLOCK_KEYPAD) { | 
|  | ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad, | 
|  | ARRAY_SIZE(tc3589x_dev_keypad), NULL, | 
|  | tc3589x->irq_base); | 
|  | if (ret) { | 
|  | dev_err(tc3589x->dev, "failed to keypad child\n"); | 
|  | return ret; | 
|  | } | 
|  | dev_info(tc3589x->dev, "added keypad block\n"); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devinit tc3589x_probe(struct i2c_client *i2c, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct tc3589x_platform_data *pdata = i2c->dev.platform_data; | 
|  | struct tc3589x *tc3589x; | 
|  | int ret; | 
|  |  | 
|  | if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA | 
|  | | I2C_FUNC_SMBUS_I2C_BLOCK)) | 
|  | return -EIO; | 
|  |  | 
|  | tc3589x = kzalloc(sizeof(struct tc3589x), GFP_KERNEL); | 
|  | if (!tc3589x) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mutex_init(&tc3589x->lock); | 
|  |  | 
|  | tc3589x->dev = &i2c->dev; | 
|  | tc3589x->i2c = i2c; | 
|  | tc3589x->pdata = pdata; | 
|  | tc3589x->irq_base = pdata->irq_base; | 
|  | tc3589x->num_gpio = id->driver_data; | 
|  |  | 
|  | i2c_set_clientdata(i2c, tc3589x); | 
|  |  | 
|  | ret = tc3589x_chip_init(tc3589x); | 
|  | if (ret) | 
|  | goto out_free; | 
|  |  | 
|  | ret = tc3589x_irq_init(tc3589x); | 
|  | if (ret) | 
|  | goto out_free; | 
|  |  | 
|  | ret = request_threaded_irq(tc3589x->i2c->irq, NULL, tc3589x_irq, | 
|  | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, | 
|  | "tc3589x", tc3589x); | 
|  | if (ret) { | 
|  | dev_err(tc3589x->dev, "failed to request IRQ: %d\n", ret); | 
|  | goto out_removeirq; | 
|  | } | 
|  |  | 
|  | ret = tc3589x_device_init(tc3589x); | 
|  | if (ret) { | 
|  | dev_err(tc3589x->dev, "failed to add child devices\n"); | 
|  | goto out_freeirq; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_freeirq: | 
|  | free_irq(tc3589x->i2c->irq, tc3589x); | 
|  | out_removeirq: | 
|  | tc3589x_irq_remove(tc3589x); | 
|  | out_free: | 
|  | kfree(tc3589x); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devexit tc3589x_remove(struct i2c_client *client) | 
|  | { | 
|  | struct tc3589x *tc3589x = i2c_get_clientdata(client); | 
|  |  | 
|  | mfd_remove_devices(tc3589x->dev); | 
|  |  | 
|  | free_irq(tc3589x->i2c->irq, tc3589x); | 
|  | tc3589x_irq_remove(tc3589x); | 
|  |  | 
|  | kfree(tc3589x); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tc3589x_suspend(struct device *dev) | 
|  | { | 
|  | struct tc3589x *tc3589x = dev_get_drvdata(dev); | 
|  | struct i2c_client *client = tc3589x->i2c; | 
|  | int ret = 0; | 
|  |  | 
|  | /* put the system to sleep mode */ | 
|  | if (!device_may_wakeup(&client->dev)) | 
|  | ret = tc3589x_reg_write(tc3589x, TC3589x_CLKMODE, | 
|  | TC3589x_CLKMODE_MODCTL_SLEEP); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int tc3589x_resume(struct device *dev) | 
|  | { | 
|  | struct tc3589x *tc3589x = dev_get_drvdata(dev); | 
|  | struct i2c_client *client = tc3589x->i2c; | 
|  | int ret = 0; | 
|  |  | 
|  | /* enable the system into operation */ | 
|  | if (!device_may_wakeup(&client->dev)) | 
|  | ret = tc3589x_reg_write(tc3589x, TC3589x_CLKMODE, | 
|  | TC3589x_CLKMODE_MODCTL_OPERATION); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const SIMPLE_DEV_PM_OPS(tc3589x_dev_pm_ops, tc3589x_suspend, | 
|  | tc3589x_resume); | 
|  |  | 
|  | static const struct i2c_device_id tc3589x_id[] = { | 
|  | { "tc3589x", 24 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, tc3589x_id); | 
|  |  | 
|  | static struct i2c_driver tc3589x_driver = { | 
|  | .driver.name	= "tc3589x", | 
|  | .driver.owner	= THIS_MODULE, | 
|  | #ifdef CONFIG_PM | 
|  | .driver.pm	= &tc3589x_dev_pm_ops, | 
|  | #endif | 
|  | .probe		= tc3589x_probe, | 
|  | .remove		= __devexit_p(tc3589x_remove), | 
|  | .id_table	= tc3589x_id, | 
|  | }; | 
|  |  | 
|  | static int __init tc3589x_init(void) | 
|  | { | 
|  | return i2c_add_driver(&tc3589x_driver); | 
|  | } | 
|  | subsys_initcall(tc3589x_init); | 
|  |  | 
|  | static void __exit tc3589x_exit(void) | 
|  | { | 
|  | i2c_del_driver(&tc3589x_driver); | 
|  | } | 
|  | module_exit(tc3589x_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_DESCRIPTION("TC3589x MFD core driver"); | 
|  | MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent"); |