|  | /* | 
|  | * f75375s.c - driver for the Fintek F75375/SP and F75373 | 
|  | *             hardware monitoring features | 
|  | * Copyright (C) 2006-2007  Riku Voipio | 
|  | * | 
|  | * Datasheets available at: | 
|  | * | 
|  | * f75375: | 
|  | * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf | 
|  | * | 
|  | * f75373: | 
|  | * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/hwmon.h> | 
|  | #include <linux/hwmon-sysfs.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/f75375s.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | /* Addresses to scan */ | 
|  | static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END }; | 
|  |  | 
|  | enum chips { f75373, f75375 }; | 
|  |  | 
|  | /* Fintek F75375 registers  */ | 
|  | #define F75375_REG_CONFIG0		0x0 | 
|  | #define F75375_REG_CONFIG1		0x1 | 
|  | #define F75375_REG_CONFIG2		0x2 | 
|  | #define F75375_REG_CONFIG3		0x3 | 
|  | #define F75375_REG_ADDR			0x4 | 
|  | #define F75375_REG_INTR			0x31 | 
|  | #define F75375_CHIP_ID			0x5A | 
|  | #define F75375_REG_VERSION		0x5C | 
|  | #define F75375_REG_VENDOR		0x5D | 
|  | #define F75375_REG_FAN_TIMER		0x60 | 
|  |  | 
|  | #define F75375_REG_VOLT(nr)		(0x10 + (nr)) | 
|  | #define F75375_REG_VOLT_HIGH(nr)	(0x20 + (nr) * 2) | 
|  | #define F75375_REG_VOLT_LOW(nr)		(0x21 + (nr) * 2) | 
|  |  | 
|  | #define F75375_REG_TEMP(nr)		(0x14 + (nr)) | 
|  | #define F75375_REG_TEMP_HIGH(nr)	(0x28 + (nr) * 2) | 
|  | #define F75375_REG_TEMP_HYST(nr)	(0x29 + (nr) * 2) | 
|  |  | 
|  | #define F75375_REG_FAN(nr)		(0x16 + (nr) * 2) | 
|  | #define F75375_REG_FAN_MIN(nr)		(0x2C + (nr) * 2) | 
|  | #define F75375_REG_FAN_FULL(nr)		(0x70 + (nr) * 0x10) | 
|  | #define F75375_REG_FAN_PWM_DUTY(nr)	(0x76 + (nr) * 0x10) | 
|  | #define F75375_REG_FAN_PWM_CLOCK(nr)	(0x7D + (nr) * 0x10) | 
|  |  | 
|  | #define F75375_REG_FAN_EXP(nr)		(0x74 + (nr) * 0x10) | 
|  | #define F75375_REG_FAN_B_TEMP(nr, step)	((0xA0 + (nr) * 0x10) + (step)) | 
|  | #define F75375_REG_FAN_B_SPEED(nr, step) \ | 
|  | ((0xA5 + (nr) * 0x10) + (step) * 2) | 
|  |  | 
|  | #define F75375_REG_PWM1_RAISE_DUTY	0x69 | 
|  | #define F75375_REG_PWM2_RAISE_DUTY	0x6A | 
|  | #define F75375_REG_PWM1_DROP_DUTY	0x6B | 
|  | #define F75375_REG_PWM2_DROP_DUTY	0x6C | 
|  |  | 
|  | #define FAN_CTRL_LINEAR(nr)		(4 + nr) | 
|  | #define FAN_CTRL_MODE(nr)		(4 + ((nr) * 2)) | 
|  |  | 
|  | /* | 
|  | * Data structures and manipulation thereof | 
|  | */ | 
|  |  | 
|  | struct f75375_data { | 
|  | unsigned short addr; | 
|  | struct device *hwmon_dev; | 
|  |  | 
|  | const char *name; | 
|  | int kind; | 
|  | struct mutex update_lock; /* protect register access */ | 
|  | char valid; | 
|  | unsigned long last_updated;	/* In jiffies */ | 
|  | unsigned long last_limits;	/* In jiffies */ | 
|  |  | 
|  | /* Register values */ | 
|  | u8 in[4]; | 
|  | u8 in_max[4]; | 
|  | u8 in_min[4]; | 
|  | u16 fan[2]; | 
|  | u16 fan_min[2]; | 
|  | u16 fan_full[2]; | 
|  | u16 fan_exp[2]; | 
|  | u8 fan_timer; | 
|  | u8 pwm[2]; | 
|  | u8 pwm_mode[2]; | 
|  | u8 pwm_enable[2]; | 
|  | s8 temp[2]; | 
|  | s8 temp_high[2]; | 
|  | s8 temp_max_hyst[2]; | 
|  | }; | 
|  |  | 
|  | static int f75375_detect(struct i2c_client *client, | 
|  | struct i2c_board_info *info); | 
|  | static int f75375_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id); | 
|  | static int f75375_remove(struct i2c_client *client); | 
|  |  | 
|  | static const struct i2c_device_id f75375_id[] = { | 
|  | { "f75373", f75373 }, | 
|  | { "f75375", f75375 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, f75375_id); | 
|  |  | 
|  | static struct i2c_driver f75375_driver = { | 
|  | .class = I2C_CLASS_HWMON, | 
|  | .driver = { | 
|  | .name = "f75375", | 
|  | }, | 
|  | .probe = f75375_probe, | 
|  | .remove = f75375_remove, | 
|  | .id_table = f75375_id, | 
|  | .detect = f75375_detect, | 
|  | .address_list = normal_i2c, | 
|  | }; | 
|  |  | 
|  | static inline int f75375_read8(struct i2c_client *client, u8 reg) | 
|  | { | 
|  | return i2c_smbus_read_byte_data(client, reg); | 
|  | } | 
|  |  | 
|  | /* in most cases, should be called while holding update_lock */ | 
|  | static inline u16 f75375_read16(struct i2c_client *client, u8 reg) | 
|  | { | 
|  | return ((i2c_smbus_read_byte_data(client, reg) << 8) | 
|  | | i2c_smbus_read_byte_data(client, reg + 1)); | 
|  | } | 
|  |  | 
|  | static inline void f75375_write8(struct i2c_client *client, u8 reg, | 
|  | u8 value) | 
|  | { | 
|  | i2c_smbus_write_byte_data(client, reg, value); | 
|  | } | 
|  |  | 
|  | static inline void f75375_write16(struct i2c_client *client, u8 reg, | 
|  | u16 value) | 
|  | { | 
|  | int err = i2c_smbus_write_byte_data(client, reg, (value << 8)); | 
|  | if (err) | 
|  | return; | 
|  | i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF)); | 
|  | } | 
|  |  | 
|  | static struct f75375_data *f75375_update_device(struct device *dev) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct f75375_data *data = i2c_get_clientdata(client); | 
|  | int nr; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  |  | 
|  | /* Limit registers cache is refreshed after 60 seconds */ | 
|  | if (time_after(jiffies, data->last_limits + 60 * HZ) | 
|  | || !data->valid) { | 
|  | for (nr = 0; nr < 2; nr++) { | 
|  | data->temp_high[nr] = | 
|  | f75375_read8(client, F75375_REG_TEMP_HIGH(nr)); | 
|  | data->temp_max_hyst[nr] = | 
|  | f75375_read8(client, F75375_REG_TEMP_HYST(nr)); | 
|  | data->fan_full[nr] = | 
|  | f75375_read16(client, F75375_REG_FAN_FULL(nr)); | 
|  | data->fan_min[nr] = | 
|  | f75375_read16(client, F75375_REG_FAN_MIN(nr)); | 
|  | data->fan_exp[nr] = | 
|  | f75375_read16(client, F75375_REG_FAN_EXP(nr)); | 
|  | data->pwm[nr] =	f75375_read8(client, | 
|  | F75375_REG_FAN_PWM_DUTY(nr)); | 
|  |  | 
|  | } | 
|  | for (nr = 0; nr < 4; nr++) { | 
|  | data->in_max[nr] = | 
|  | f75375_read8(client, F75375_REG_VOLT_HIGH(nr)); | 
|  | data->in_min[nr] = | 
|  | f75375_read8(client, F75375_REG_VOLT_LOW(nr)); | 
|  | } | 
|  | data->fan_timer = f75375_read8(client, F75375_REG_FAN_TIMER); | 
|  | data->last_limits = jiffies; | 
|  | } | 
|  |  | 
|  | /* Measurement registers cache is refreshed after 2 second */ | 
|  | if (time_after(jiffies, data->last_updated + 2 * HZ) | 
|  | || !data->valid) { | 
|  | for (nr = 0; nr < 2; nr++) { | 
|  | data->temp[nr] = | 
|  | f75375_read8(client, F75375_REG_TEMP(nr)); | 
|  | data->fan[nr] = | 
|  | f75375_read16(client, F75375_REG_FAN(nr)); | 
|  | } | 
|  | for (nr = 0; nr < 4; nr++) | 
|  | data->in[nr] = | 
|  | f75375_read8(client, F75375_REG_VOLT(nr)); | 
|  |  | 
|  | data->last_updated = jiffies; | 
|  | data->valid = 1; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&data->update_lock); | 
|  | return data; | 
|  | } | 
|  |  | 
|  | static inline u16 rpm_from_reg(u16 reg) | 
|  | { | 
|  | if (reg == 0 || reg == 0xffff) | 
|  | return 0; | 
|  | return (1500000 / reg); | 
|  | } | 
|  |  | 
|  | static inline u16 rpm_to_reg(int rpm) | 
|  | { | 
|  | if (rpm < 367 || rpm > 0xffff) | 
|  | return 0xffff; | 
|  | return (1500000 / rpm); | 
|  | } | 
|  |  | 
|  | static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct f75375_data *data = i2c_get_clientdata(client); | 
|  | int val = simple_strtoul(buf, NULL, 10); | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->fan_min[nr] = rpm_to_reg(val); | 
|  | f75375_write16(client, F75375_REG_FAN_MIN(nr), data->fan_min[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t set_fan_exp(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct f75375_data *data = i2c_get_clientdata(client); | 
|  | int val = simple_strtoul(buf, NULL, 10); | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->fan_exp[nr] = rpm_to_reg(val); | 
|  | f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_exp[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct f75375_data *data = i2c_get_clientdata(client); | 
|  | int val = simple_strtoul(buf, NULL, 10); | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->pwm[nr] = SENSORS_LIMIT(val, 0, 255); | 
|  | f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), data->pwm[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t show_pwm_enable(struct device *dev, struct device_attribute | 
|  | *attr, char *buf) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct f75375_data *data = f75375_update_device(dev); | 
|  | return sprintf(buf, "%d\n", data->pwm_enable[nr]); | 
|  | } | 
|  |  | 
|  | static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) | 
|  | { | 
|  | struct f75375_data *data = i2c_get_clientdata(client); | 
|  | u8 fanmode; | 
|  |  | 
|  | if (val < 0 || val > 4) | 
|  | return -EINVAL; | 
|  |  | 
|  | fanmode = f75375_read8(client, F75375_REG_FAN_TIMER); | 
|  | fanmode &= ~(3 << FAN_CTRL_MODE(nr)); | 
|  |  | 
|  | switch (val) { | 
|  | case 0: /* Full speed */ | 
|  | fanmode  |= (3 << FAN_CTRL_MODE(nr)); | 
|  | data->pwm[nr] = 255; | 
|  | f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), | 
|  | data->pwm[nr]); | 
|  | break; | 
|  | case 1: /* PWM */ | 
|  | fanmode  |= (3 << FAN_CTRL_MODE(nr)); | 
|  | break; | 
|  | case 2: /* AUTOMATIC*/ | 
|  | fanmode  |= (2 << FAN_CTRL_MODE(nr)); | 
|  | break; | 
|  | case 3: /* fan speed */ | 
|  | break; | 
|  | } | 
|  | f75375_write8(client, F75375_REG_FAN_TIMER, fanmode); | 
|  | data->pwm_enable[nr] = val; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct f75375_data *data = i2c_get_clientdata(client); | 
|  | int val = simple_strtoul(buf, NULL, 10); | 
|  | int err = 0; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | err = set_pwm_enable_direct(client, nr, val); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return err ? err : count; | 
|  | } | 
|  |  | 
|  | static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct f75375_data *data = i2c_get_clientdata(client); | 
|  | int val = simple_strtoul(buf, NULL, 10); | 
|  | u8 conf = 0; | 
|  |  | 
|  | if (!(val == 0 || val == 1)) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | conf = f75375_read8(client, F75375_REG_CONFIG1); | 
|  | conf &= ~(1 << FAN_CTRL_LINEAR(nr)); | 
|  |  | 
|  | if (val == 0) | 
|  | conf |= (1 << FAN_CTRL_LINEAR(nr)) ; | 
|  |  | 
|  | f75375_write8(client, F75375_REG_CONFIG1, conf); | 
|  | data->pwm_mode[nr] = val; | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t show_pwm(struct device *dev, struct device_attribute | 
|  | *attr, char *buf) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct f75375_data *data = f75375_update_device(dev); | 
|  | return sprintf(buf, "%d\n", data->pwm[nr]); | 
|  | } | 
|  |  | 
|  | static ssize_t show_pwm_mode(struct device *dev, struct device_attribute | 
|  | *attr, char *buf) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct f75375_data *data = f75375_update_device(dev); | 
|  | return sprintf(buf, "%d\n", data->pwm_mode[nr]); | 
|  | } | 
|  |  | 
|  | #define VOLT_FROM_REG(val) ((val) * 8) | 
|  | #define VOLT_TO_REG(val) ((val) / 8) | 
|  |  | 
|  | static ssize_t show_in(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct f75375_data *data = f75375_update_device(dev); | 
|  | return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct f75375_data *data = f75375_update_device(dev); | 
|  | return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_max[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct f75375_data *data = f75375_update_device(dev); | 
|  | return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_min[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct f75375_data *data = i2c_get_clientdata(client); | 
|  | int val = simple_strtoul(buf, NULL, 10); | 
|  | val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff); | 
|  | mutex_lock(&data->update_lock); | 
|  | data->in_max[nr] = val; | 
|  | f75375_write8(client, F75375_REG_VOLT_HIGH(nr), data->in_max[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct f75375_data *data = i2c_get_clientdata(client); | 
|  | int val = simple_strtoul(buf, NULL, 10); | 
|  | val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff); | 
|  | mutex_lock(&data->update_lock); | 
|  | data->in_min[nr] = val; | 
|  | f75375_write8(client, F75375_REG_VOLT_LOW(nr), data->in_min[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  | #define TEMP_FROM_REG(val) ((val) * 1000) | 
|  | #define TEMP_TO_REG(val) ((val) / 1000) | 
|  |  | 
|  | static ssize_t show_temp(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct f75375_data *data = f75375_update_device(dev); | 
|  | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct f75375_data *data = f75375_update_device(dev); | 
|  | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_temp_max_hyst(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct f75375_data *data = f75375_update_device(dev); | 
|  | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct f75375_data *data = i2c_get_clientdata(client); | 
|  | int val = simple_strtol(buf, NULL, 10); | 
|  | val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127); | 
|  | mutex_lock(&data->update_lock); | 
|  | data->temp_high[nr] = val; | 
|  | f75375_write8(client, F75375_REG_TEMP_HIGH(nr), data->temp_high[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t set_temp_max_hyst(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | int nr = to_sensor_dev_attr(attr)->index; | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct f75375_data *data = i2c_get_clientdata(client); | 
|  | int val = simple_strtol(buf, NULL, 10); | 
|  | val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127); | 
|  | mutex_lock(&data->update_lock); | 
|  | data->temp_max_hyst[nr] = val; | 
|  | f75375_write8(client, F75375_REG_TEMP_HYST(nr), | 
|  | data->temp_max_hyst[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | #define show_fan(thing) \ | 
|  | static ssize_t show_##thing(struct device *dev, struct device_attribute *attr, \ | 
|  | char *buf)\ | 
|  | {\ | 
|  | int nr = to_sensor_dev_attr(attr)->index;\ | 
|  | struct f75375_data *data = f75375_update_device(dev); \ | 
|  | return sprintf(buf, "%d\n", rpm_from_reg(data->thing[nr])); \ | 
|  | } | 
|  |  | 
|  | show_fan(fan); | 
|  | show_fan(fan_min); | 
|  | show_fan(fan_full); | 
|  | show_fan(fan_exp); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO|S_IWUSR, | 
|  | show_in_max, set_in_max, 0); | 
|  | static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO|S_IWUSR, | 
|  | show_in_min, set_in_min, 0); | 
|  | static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1); | 
|  | static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO|S_IWUSR, | 
|  | show_in_max, set_in_max, 1); | 
|  | static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO|S_IWUSR, | 
|  | show_in_min, set_in_min, 1); | 
|  | static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2); | 
|  | static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO|S_IWUSR, | 
|  | show_in_max, set_in_max, 2); | 
|  | static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO|S_IWUSR, | 
|  | show_in_min, set_in_min, 2); | 
|  | static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3); | 
|  | static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO|S_IWUSR, | 
|  | show_in_max, set_in_max, 3); | 
|  | static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO|S_IWUSR, | 
|  | show_in_min, set_in_min, 3); | 
|  | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR, | 
|  | show_temp_max_hyst, set_temp_max_hyst, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO|S_IWUSR, | 
|  | show_temp_max, set_temp_max, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); | 
|  | static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR, | 
|  | show_temp_max_hyst, set_temp_max_hyst, 1); | 
|  | static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO|S_IWUSR, | 
|  | show_temp_max, set_temp_max, 1); | 
|  | static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(fan1_full, S_IRUGO, show_fan_full, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO|S_IWUSR, | 
|  | show_fan_min, set_fan_min, 0); | 
|  | static SENSOR_DEVICE_ATTR(fan1_exp, S_IRUGO|S_IWUSR, | 
|  | show_fan_exp, set_fan_exp, 0); | 
|  | static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); | 
|  | static SENSOR_DEVICE_ATTR(fan2_full, S_IRUGO, show_fan_full, NULL, 1); | 
|  | static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO|S_IWUSR, | 
|  | show_fan_min, set_fan_min, 1); | 
|  | static SENSOR_DEVICE_ATTR(fan2_exp, S_IRUGO|S_IWUSR, | 
|  | show_fan_exp, set_fan_exp, 1); | 
|  | static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR, | 
|  | show_pwm, set_pwm, 0); | 
|  | static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, | 
|  | show_pwm_enable, set_pwm_enable, 0); | 
|  | static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, | 
|  | show_pwm_mode, set_pwm_mode, 0); | 
|  | static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, | 
|  | show_pwm, set_pwm, 1); | 
|  | static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, | 
|  | show_pwm_enable, set_pwm_enable, 1); | 
|  | static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO, | 
|  | show_pwm_mode, set_pwm_mode, 1); | 
|  |  | 
|  | static struct attribute *f75375_attributes[] = { | 
|  | &sensor_dev_attr_temp1_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_fan1_input.dev_attr.attr, | 
|  | &sensor_dev_attr_fan1_full.dev_attr.attr, | 
|  | &sensor_dev_attr_fan1_min.dev_attr.attr, | 
|  | &sensor_dev_attr_fan1_exp.dev_attr.attr, | 
|  | &sensor_dev_attr_fan2_input.dev_attr.attr, | 
|  | &sensor_dev_attr_fan2_full.dev_attr.attr, | 
|  | &sensor_dev_attr_fan2_min.dev_attr.attr, | 
|  | &sensor_dev_attr_fan2_exp.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm1.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm1_enable.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm1_mode.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2_enable.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2_mode.dev_attr.attr, | 
|  | &sensor_dev_attr_in0_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in0_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in0_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in1_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in1_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in1_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in2_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in2_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in2_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in3_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in3_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in3_min.dev_attr.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group f75375_group = { | 
|  | .attrs = f75375_attributes, | 
|  | }; | 
|  |  | 
|  | static void f75375_init(struct i2c_client *client, struct f75375_data *data, | 
|  | struct f75375s_platform_data *f75375s_pdata) | 
|  | { | 
|  | int nr; | 
|  | set_pwm_enable_direct(client, 0, f75375s_pdata->pwm_enable[0]); | 
|  | set_pwm_enable_direct(client, 1, f75375s_pdata->pwm_enable[1]); | 
|  | for (nr = 0; nr < 2; nr++) { | 
|  | data->pwm[nr] = SENSORS_LIMIT(f75375s_pdata->pwm[nr], 0, 255); | 
|  | f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), | 
|  | data->pwm[nr]); | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | static int f75375_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct f75375_data *data; | 
|  | struct f75375s_platform_data *f75375s_pdata = client->dev.platform_data; | 
|  | int err; | 
|  |  | 
|  | if (!i2c_check_functionality(client->adapter, | 
|  | I2C_FUNC_SMBUS_BYTE_DATA)) | 
|  | return -EIO; | 
|  | if (!(data = kzalloc(sizeof(struct f75375_data), GFP_KERNEL))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | i2c_set_clientdata(client, data); | 
|  | mutex_init(&data->update_lock); | 
|  | data->kind = id->driver_data; | 
|  |  | 
|  | if ((err = sysfs_create_group(&client->dev.kobj, &f75375_group))) | 
|  | goto exit_free; | 
|  |  | 
|  | if (data->kind == f75375) { | 
|  | err = sysfs_chmod_file(&client->dev.kobj, | 
|  | &sensor_dev_attr_pwm1_mode.dev_attr.attr, | 
|  | S_IRUGO | S_IWUSR); | 
|  | if (err) | 
|  | goto exit_remove; | 
|  | err = sysfs_chmod_file(&client->dev.kobj, | 
|  | &sensor_dev_attr_pwm2_mode.dev_attr.attr, | 
|  | S_IRUGO | S_IWUSR); | 
|  | if (err) | 
|  | goto exit_remove; | 
|  | } | 
|  |  | 
|  | data->hwmon_dev = hwmon_device_register(&client->dev); | 
|  | if (IS_ERR(data->hwmon_dev)) { | 
|  | err = PTR_ERR(data->hwmon_dev); | 
|  | goto exit_remove; | 
|  | } | 
|  |  | 
|  | if (f75375s_pdata != NULL) | 
|  | f75375_init(client, data, f75375s_pdata); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit_remove: | 
|  | sysfs_remove_group(&client->dev.kobj, &f75375_group); | 
|  | exit_free: | 
|  | kfree(data); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int f75375_remove(struct i2c_client *client) | 
|  | { | 
|  | struct f75375_data *data = i2c_get_clientdata(client); | 
|  | hwmon_device_unregister(data->hwmon_dev); | 
|  | sysfs_remove_group(&client->dev.kobj, &f75375_group); | 
|  | kfree(data); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Return 0 if detection is successful, -ENODEV otherwise */ | 
|  | static int f75375_detect(struct i2c_client *client, | 
|  | struct i2c_board_info *info) | 
|  | { | 
|  | struct i2c_adapter *adapter = client->adapter; | 
|  | u16 vendid, chipid; | 
|  | u8 version; | 
|  | const char *name; | 
|  |  | 
|  | vendid = f75375_read16(client, F75375_REG_VENDOR); | 
|  | chipid = f75375_read16(client, F75375_CHIP_ID); | 
|  | if (chipid == 0x0306 && vendid == 0x1934) | 
|  | name = "f75375"; | 
|  | else if (chipid == 0x0204 && vendid == 0x1934) | 
|  | name = "f75373"; | 
|  | else | 
|  | return -ENODEV; | 
|  |  | 
|  | version = f75375_read8(client, F75375_REG_VERSION); | 
|  | dev_info(&adapter->dev, "found %s version: %02X\n", name, version); | 
|  | strlcpy(info->type, name, I2C_NAME_SIZE); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init sensors_f75375_init(void) | 
|  | { | 
|  | return i2c_add_driver(&f75375_driver); | 
|  | } | 
|  |  | 
|  | static void __exit sensors_f75375_exit(void) | 
|  | { | 
|  | i2c_del_driver(&f75375_driver); | 
|  | } | 
|  |  | 
|  | MODULE_AUTHOR("Riku Voipio"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("F75373/F75375 hardware monitoring driver"); | 
|  |  | 
|  | module_init(sensors_f75375_init); | 
|  | module_exit(sensors_f75375_exit); |