|  | /* | 
|  | * at91_cf.c -- AT91 CompactFlash controller driver | 
|  | * | 
|  | * Copyright (C) 2005 David Brownell | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <pcmcia/ss.h> | 
|  |  | 
|  | #include <mach/hardware.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/sizes.h> | 
|  | #include <asm/gpio.h> | 
|  |  | 
|  | #include <mach/board.h> | 
|  | #include <mach/at91rm9200_mc.h> | 
|  |  | 
|  |  | 
|  | /* | 
|  | * A0..A10 work in each range; A23 indicates I/O space;  A25 is CFRNW; | 
|  | * some other bit in {A24,A22..A11} is nREG to flag memory access | 
|  | * (vs attributes).  So more than 2KB/region would just be waste. | 
|  | * Note: These are offsets from the physical base address. | 
|  | */ | 
|  | #define	CF_ATTR_PHYS	(0) | 
|  | #define	CF_IO_PHYS	(1 << 23) | 
|  | #define	CF_MEM_PHYS	(0x017ff800) | 
|  |  | 
|  | /*--------------------------------------------------------------------------*/ | 
|  |  | 
|  | static const char driver_name[] = "at91_cf"; | 
|  |  | 
|  | struct at91_cf_socket { | 
|  | struct pcmcia_socket	socket; | 
|  |  | 
|  | unsigned		present:1; | 
|  |  | 
|  | struct platform_device	*pdev; | 
|  | struct at91_cf_data	*board; | 
|  |  | 
|  | unsigned long		phys_baseaddr; | 
|  | }; | 
|  |  | 
|  | static inline int at91_cf_present(struct at91_cf_socket *cf) | 
|  | { | 
|  | return !gpio_get_value(cf->board->det_pin); | 
|  | } | 
|  |  | 
|  | /*--------------------------------------------------------------------------*/ | 
|  |  | 
|  | static int at91_cf_ss_init(struct pcmcia_socket *s) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static irqreturn_t at91_cf_irq(int irq, void *_cf) | 
|  | { | 
|  | struct at91_cf_socket *cf = _cf; | 
|  |  | 
|  | if (irq == cf->board->det_pin) { | 
|  | unsigned present = at91_cf_present(cf); | 
|  |  | 
|  | /* kick pccard as needed */ | 
|  | if (present != cf->present) { | 
|  | cf->present = present; | 
|  | pr_debug("%s: card %s\n", driver_name, | 
|  | present ? "present" : "gone"); | 
|  | pcmcia_parse_events(&cf->socket, SS_DETECT); | 
|  | } | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp) | 
|  | { | 
|  | struct at91_cf_socket	*cf; | 
|  |  | 
|  | if (!sp) | 
|  | return -EINVAL; | 
|  |  | 
|  | cf = container_of(s, struct at91_cf_socket, socket); | 
|  |  | 
|  | /* NOTE: CF is always 3VCARD */ | 
|  | if (at91_cf_present(cf)) { | 
|  | int rdy	= cf->board->irq_pin;	/* RDY/nIRQ */ | 
|  | int vcc	= cf->board->vcc_pin; | 
|  |  | 
|  | *sp = SS_DETECT | SS_3VCARD; | 
|  | if (!rdy || gpio_get_value(rdy)) | 
|  | *sp |= SS_READY; | 
|  | if (!vcc || gpio_get_value(vcc)) | 
|  | *sp |= SS_POWERON; | 
|  | } else | 
|  | *sp = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s) | 
|  | { | 
|  | struct at91_cf_socket	*cf; | 
|  |  | 
|  | cf = container_of(sock, struct at91_cf_socket, socket); | 
|  |  | 
|  | /* switch Vcc if needed and possible */ | 
|  | if (cf->board->vcc_pin) { | 
|  | switch (s->Vcc) { | 
|  | case 0: | 
|  | gpio_set_value(cf->board->vcc_pin, 0); | 
|  | break; | 
|  | case 33: | 
|  | gpio_set_value(cf->board->vcc_pin, 1); | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* toggle reset if needed */ | 
|  | gpio_set_value(cf->board->rst_pin, s->flags & SS_RESET); | 
|  |  | 
|  | pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n", | 
|  | driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int at91_cf_ss_suspend(struct pcmcia_socket *s) | 
|  | { | 
|  | return at91_cf_set_socket(s, &dead_socket); | 
|  | } | 
|  |  | 
|  | /* we already mapped the I/O region */ | 
|  | static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io) | 
|  | { | 
|  | struct at91_cf_socket	*cf; | 
|  | u32			csr; | 
|  |  | 
|  | cf = container_of(s, struct at91_cf_socket, socket); | 
|  | io->flags &= (MAP_ACTIVE | MAP_16BIT | MAP_AUTOSZ); | 
|  |  | 
|  | /* | 
|  | * Use 16 bit accesses unless/until we need 8-bit i/o space. | 
|  | */ | 
|  | csr = at91_sys_read(AT91_SMC_CSR(cf->board->chipselect)) & ~AT91_SMC_DBW; | 
|  |  | 
|  | /* | 
|  | * NOTE: this CF controller ignores IOIS16, so we can't really do | 
|  | * MAP_AUTOSZ.  The 16bit mode allows single byte access on either | 
|  | * D0-D7 (even addr) or D8-D15 (odd), so it's close enough for many | 
|  | * purposes (and handles ide-cs). | 
|  | * | 
|  | * The 8bit mode is needed for odd byte access on D0-D7.  It seems | 
|  | * some cards only like that way to get at the odd byte, despite | 
|  | * CF 3.0 spec table 35 also giving the D8-D15 option. | 
|  | */ | 
|  | if (!(io->flags & (MAP_16BIT | MAP_AUTOSZ))) { | 
|  | csr |= AT91_SMC_DBW_8; | 
|  | pr_debug("%s: 8bit i/o bus\n", driver_name); | 
|  | } else { | 
|  | csr |= AT91_SMC_DBW_16; | 
|  | pr_debug("%s: 16bit i/o bus\n", driver_name); | 
|  | } | 
|  | at91_sys_write(AT91_SMC_CSR(cf->board->chipselect), csr); | 
|  |  | 
|  | io->start = cf->socket.io_offset; | 
|  | io->stop = io->start + SZ_2K - 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* pcmcia layer maps/unmaps mem regions */ | 
|  | static int | 
|  | at91_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map) | 
|  | { | 
|  | struct at91_cf_socket	*cf; | 
|  |  | 
|  | if (map->card_start) | 
|  | return -EINVAL; | 
|  |  | 
|  | cf = container_of(s, struct at91_cf_socket, socket); | 
|  |  | 
|  | map->flags &= (MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT); | 
|  | if (map->flags & MAP_ATTRIB) | 
|  | map->static_start = cf->phys_baseaddr + CF_ATTR_PHYS; | 
|  | else | 
|  | map->static_start = cf->phys_baseaddr + CF_MEM_PHYS; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct pccard_operations at91_cf_ops = { | 
|  | .init			= at91_cf_ss_init, | 
|  | .suspend		= at91_cf_ss_suspend, | 
|  | .get_status		= at91_cf_get_status, | 
|  | .set_socket		= at91_cf_set_socket, | 
|  | .set_io_map		= at91_cf_set_io_map, | 
|  | .set_mem_map		= at91_cf_set_mem_map, | 
|  | }; | 
|  |  | 
|  | /*--------------------------------------------------------------------------*/ | 
|  |  | 
|  | static int __init at91_cf_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct at91_cf_socket	*cf; | 
|  | struct at91_cf_data	*board = pdev->dev.platform_data; | 
|  | struct resource		*io; | 
|  | int			status; | 
|  |  | 
|  | if (!board || !board->det_pin || !board->rst_pin) | 
|  | return -ENODEV; | 
|  |  | 
|  | io = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!io) | 
|  | return -ENODEV; | 
|  |  | 
|  | cf = kzalloc(sizeof *cf, GFP_KERNEL); | 
|  | if (!cf) | 
|  | return -ENOMEM; | 
|  |  | 
|  | cf->board = board; | 
|  | cf->pdev = pdev; | 
|  | cf->phys_baseaddr = io->start; | 
|  | platform_set_drvdata(pdev, cf); | 
|  |  | 
|  | /* must be a GPIO; ergo must trigger on both edges */ | 
|  | status = gpio_request(board->det_pin, "cf_det"); | 
|  | if (status < 0) | 
|  | goto fail0; | 
|  | status = request_irq(board->det_pin, at91_cf_irq, 0, driver_name, cf); | 
|  | if (status < 0) | 
|  | goto fail00; | 
|  | device_init_wakeup(&pdev->dev, 1); | 
|  |  | 
|  | status = gpio_request(board->rst_pin, "cf_rst"); | 
|  | if (status < 0) | 
|  | goto fail0a; | 
|  |  | 
|  | if (board->vcc_pin) { | 
|  | status = gpio_request(board->vcc_pin, "cf_vcc"); | 
|  | if (status < 0) | 
|  | goto fail0b; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The card driver will request this irq later as needed. | 
|  | * but it causes lots of "irqNN: nobody cared" messages | 
|  | * unless we report that we handle everything (sigh). | 
|  | * (Note:  DK board doesn't wire the IRQ pin...) | 
|  | */ | 
|  | if (board->irq_pin) { | 
|  | status = gpio_request(board->irq_pin, "cf_irq"); | 
|  | if (status < 0) | 
|  | goto fail0c; | 
|  | status = request_irq(board->irq_pin, at91_cf_irq, | 
|  | IRQF_SHARED, driver_name, cf); | 
|  | if (status < 0) | 
|  | goto fail0d; | 
|  | cf->socket.pci_irq = board->irq_pin; | 
|  | } else | 
|  | cf->socket.pci_irq = nr_irqs + 1; | 
|  |  | 
|  | /* pcmcia layer only remaps "real" memory not iospace */ | 
|  | cf->socket.io_offset = (unsigned long) | 
|  | ioremap(cf->phys_baseaddr + CF_IO_PHYS, SZ_2K); | 
|  | if (!cf->socket.io_offset) { | 
|  | status = -ENXIO; | 
|  | goto fail1; | 
|  | } | 
|  |  | 
|  | /* reserve chip-select regions */ | 
|  | if (!request_mem_region(io->start, io->end + 1 - io->start, | 
|  | driver_name)) { | 
|  | status = -ENXIO; | 
|  | goto fail1; | 
|  | } | 
|  |  | 
|  | pr_info("%s: irqs det #%d, io #%d\n", driver_name, | 
|  | board->det_pin, board->irq_pin); | 
|  |  | 
|  | cf->socket.owner = THIS_MODULE; | 
|  | cf->socket.dev.parent = &pdev->dev; | 
|  | cf->socket.ops = &at91_cf_ops; | 
|  | cf->socket.resource_ops = &pccard_static_ops; | 
|  | cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP | 
|  | | SS_CAP_MEM_ALIGN; | 
|  | cf->socket.map_size = SZ_2K; | 
|  | cf->socket.io[0].res = io; | 
|  |  | 
|  | status = pcmcia_register_socket(&cf->socket); | 
|  | if (status < 0) | 
|  | goto fail2; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail2: | 
|  | release_mem_region(io->start, io->end + 1 - io->start); | 
|  | fail1: | 
|  | if (cf->socket.io_offset) | 
|  | iounmap((void __iomem *) cf->socket.io_offset); | 
|  | if (board->irq_pin) { | 
|  | free_irq(board->irq_pin, cf); | 
|  | fail0d: | 
|  | gpio_free(board->irq_pin); | 
|  | } | 
|  | fail0c: | 
|  | if (board->vcc_pin) | 
|  | gpio_free(board->vcc_pin); | 
|  | fail0b: | 
|  | gpio_free(board->rst_pin); | 
|  | fail0a: | 
|  | device_init_wakeup(&pdev->dev, 0); | 
|  | free_irq(board->det_pin, cf); | 
|  | fail00: | 
|  | gpio_free(board->det_pin); | 
|  | fail0: | 
|  | kfree(cf); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int __exit at91_cf_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct at91_cf_socket	*cf = platform_get_drvdata(pdev); | 
|  | struct at91_cf_data	*board = cf->board; | 
|  | struct resource		*io = cf->socket.io[0].res; | 
|  |  | 
|  | pcmcia_unregister_socket(&cf->socket); | 
|  | release_mem_region(io->start, io->end + 1 - io->start); | 
|  | iounmap((void __iomem *) cf->socket.io_offset); | 
|  | if (board->irq_pin) { | 
|  | free_irq(board->irq_pin, cf); | 
|  | gpio_free(board->irq_pin); | 
|  | } | 
|  | if (board->vcc_pin) | 
|  | gpio_free(board->vcc_pin); | 
|  | gpio_free(board->rst_pin); | 
|  | device_init_wakeup(&pdev->dev, 0); | 
|  | free_irq(board->det_pin, cf); | 
|  | gpio_free(board->det_pin); | 
|  | kfree(cf); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef	CONFIG_PM | 
|  |  | 
|  | static int at91_cf_suspend(struct platform_device *pdev, pm_message_t mesg) | 
|  | { | 
|  | struct at91_cf_socket	*cf = platform_get_drvdata(pdev); | 
|  | struct at91_cf_data	*board = cf->board; | 
|  |  | 
|  | if (device_may_wakeup(&pdev->dev)) { | 
|  | enable_irq_wake(board->det_pin); | 
|  | if (board->irq_pin) | 
|  | enable_irq_wake(board->irq_pin); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int at91_cf_resume(struct platform_device *pdev) | 
|  | { | 
|  | struct at91_cf_socket	*cf = platform_get_drvdata(pdev); | 
|  | struct at91_cf_data	*board = cf->board; | 
|  |  | 
|  | if (device_may_wakeup(&pdev->dev)) { | 
|  | disable_irq_wake(board->det_pin); | 
|  | if (board->irq_pin) | 
|  | disable_irq_wake(board->irq_pin); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #else | 
|  | #define	at91_cf_suspend		NULL | 
|  | #define	at91_cf_resume		NULL | 
|  | #endif | 
|  |  | 
|  | static struct platform_driver at91_cf_driver = { | 
|  | .driver = { | 
|  | .name		= (char *) driver_name, | 
|  | .owner		= THIS_MODULE, | 
|  | }, | 
|  | .remove		= __exit_p(at91_cf_remove), | 
|  | .suspend	= at91_cf_suspend, | 
|  | .resume		= at91_cf_resume, | 
|  | }; | 
|  |  | 
|  | /*--------------------------------------------------------------------------*/ | 
|  |  | 
|  | static int __init at91_cf_init(void) | 
|  | { | 
|  | return platform_driver_probe(&at91_cf_driver, at91_cf_probe); | 
|  | } | 
|  | module_init(at91_cf_init); | 
|  |  | 
|  | static void __exit at91_cf_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&at91_cf_driver); | 
|  | } | 
|  | module_exit(at91_cf_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("AT91 Compact Flash Driver"); | 
|  | MODULE_AUTHOR("David Brownell"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("platform:at91_cf"); |