| /* | 
 |  * Toshiba e740 PCMCIA specific routines. | 
 |  * | 
 |  * (c) 2004 Ian Molton <spyro@f2s.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/platform_device.h> | 
 |  | 
 | #include <mach/eseries-gpio.h> | 
 |  | 
 | #include <asm/irq.h> | 
 | #include <asm/mach-types.h> | 
 |  | 
 | #include "soc_common.h" | 
 |  | 
 | static struct pcmcia_irqs cd_irqs[] = { | 
 | 	{ | 
 | 		.sock = 0, | 
 | 		.irq  = IRQ_GPIO(GPIO_E740_PCMCIA_CD0), | 
 | 		.str  = "CF card detect" | 
 | 	}, | 
 | 	{ | 
 | 		.sock = 1, | 
 | 		.irq  = IRQ_GPIO(GPIO_E740_PCMCIA_CD1), | 
 | 		.str  = "Wifi switch" | 
 | 	}, | 
 | }; | 
 |  | 
 | static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt) | 
 | { | 
 | 	skt->socket.pci_irq = skt->nr == 0 ? IRQ_GPIO(GPIO_E740_PCMCIA_RDY0) : | 
 | 				IRQ_GPIO(GPIO_E740_PCMCIA_RDY1); | 
 |  | 
 | 	return soc_pcmcia_request_irqs(skt, &cd_irqs[skt->nr], 1); | 
 | } | 
 |  | 
 | /* | 
 |  * Release all resources. | 
 |  */ | 
 | static void e740_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) | 
 | { | 
 | 	soc_pcmcia_free_irqs(skt, &cd_irqs[skt->nr], 1); | 
 | } | 
 |  | 
 | static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt, | 
 | 					struct pcmcia_state *state) | 
 | { | 
 | 	if (skt->nr == 0) { | 
 | 		state->detect = gpio_get_value(GPIO_E740_PCMCIA_CD0) ? 0 : 1; | 
 | 		state->ready  = gpio_get_value(GPIO_E740_PCMCIA_RDY0) ? 1 : 0; | 
 | 	} else { | 
 | 		state->detect = gpio_get_value(GPIO_E740_PCMCIA_CD1) ? 0 : 1; | 
 | 		state->ready  = gpio_get_value(GPIO_E740_PCMCIA_RDY1) ? 1 : 0; | 
 | 	} | 
 |  | 
 | 	state->vs_3v  = 1; | 
 | 	state->bvd1   = 1; | 
 | 	state->bvd2   = 1; | 
 | 	state->wrprot = 0; | 
 | 	state->vs_Xv  = 0; | 
 | } | 
 |  | 
 | static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, | 
 | 					const socket_state_t *state) | 
 | { | 
 | 	if (state->flags & SS_RESET) { | 
 | 		if (skt->nr == 0) | 
 | 			gpio_set_value(GPIO_E740_PCMCIA_RST0, 1); | 
 | 		else | 
 | 			gpio_set_value(GPIO_E740_PCMCIA_RST1, 1); | 
 | 	} else { | 
 | 		if (skt->nr == 0) | 
 | 			gpio_set_value(GPIO_E740_PCMCIA_RST0, 0); | 
 | 		else | 
 | 			gpio_set_value(GPIO_E740_PCMCIA_RST1, 0); | 
 | 	} | 
 |  | 
 | 	switch (state->Vcc) { | 
 | 	case 0:	/* Socket off */ | 
 | 		if (skt->nr == 0) | 
 | 			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 0); | 
 | 		else | 
 | 			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 1); | 
 | 		break; | 
 | 	case 50: | 
 | 	case 33: /* socket on */ | 
 | 		if (skt->nr == 0) | 
 | 			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 1); | 
 | 		else | 
 | 			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 0); | 
 | 		break; | 
 | 	default: | 
 | 		printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Enable card status IRQs on (re-)initialisation.  This can | 
 |  * be called at initialisation, power management event, or | 
 |  * pcmcia event. | 
 |  */ | 
 | static void e740_pcmcia_socket_init(struct soc_pcmcia_socket *skt) | 
 | { | 
 | 	soc_pcmcia_enable_irqs(skt, cd_irqs, ARRAY_SIZE(cd_irqs)); | 
 | } | 
 |  | 
 | /* | 
 |  * Disable card status IRQs on suspend. | 
 |  */ | 
 | static void e740_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) | 
 | { | 
 | 	soc_pcmcia_disable_irqs(skt, cd_irqs, ARRAY_SIZE(cd_irqs)); | 
 | } | 
 |  | 
 | static struct pcmcia_low_level e740_pcmcia_ops = { | 
 | 	.owner            = THIS_MODULE, | 
 | 	.hw_init          = e740_pcmcia_hw_init, | 
 | 	.hw_shutdown      = e740_pcmcia_hw_shutdown, | 
 | 	.socket_state     = e740_pcmcia_socket_state, | 
 | 	.configure_socket = e740_pcmcia_configure_socket, | 
 | 	.socket_init      = e740_pcmcia_socket_init, | 
 | 	.socket_suspend   = e740_pcmcia_socket_suspend, | 
 | 	.nr               = 2, | 
 | }; | 
 |  | 
 | static struct platform_device *e740_pcmcia_device; | 
 |  | 
 | static int __init e740_pcmcia_init(void) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (!machine_is_e740()) | 
 | 		return -ENODEV; | 
 |  | 
 | 	e740_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); | 
 | 	if (!e740_pcmcia_device) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ret = platform_device_add_data(e740_pcmcia_device, &e740_pcmcia_ops, | 
 | 					sizeof(e740_pcmcia_ops)); | 
 |  | 
 | 	if (!ret) | 
 | 		ret = platform_device_add(e740_pcmcia_device); | 
 |  | 
 | 	if (ret) | 
 | 		platform_device_put(e740_pcmcia_device); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __exit e740_pcmcia_exit(void) | 
 | { | 
 | 	platform_device_unregister(e740_pcmcia_device); | 
 | } | 
 |  | 
 | module_init(e740_pcmcia_init); | 
 | module_exit(e740_pcmcia_exit); | 
 |  | 
 | MODULE_LICENSE("GPL v2"); | 
 | MODULE_AUTHOR("Ian Molton <spyro@f2s.com>"); | 
 | MODULE_ALIAS("platform:pxa2xx-pcmcia"); | 
 | MODULE_DESCRIPTION("e740 PCMCIA platform support"); |