| /* | 
 |  * BQ27x00 battery driver | 
 |  * | 
 |  * Copyright (C) 2008 Rodolfo Giometti <giometti@linux.it> | 
 |  * Copyright (C) 2008 Eurotech S.p.A. <info@eurotech.it> | 
 |  * Copyright (C) 2010-2011 Lars-Peter Clausen <lars@metafoo.de> | 
 |  * Copyright (C) 2011 Pali Rohár <pali.rohar@gmail.com> | 
 |  * | 
 |  * Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc. | 
 |  * | 
 |  * This package is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR | 
 |  * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED | 
 |  * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. | 
 |  * | 
 |  */ | 
 |  | 
 | /* | 
 |  * Datasheets: | 
 |  * http://focus.ti.com/docs/prod/folders/print/bq27000.html | 
 |  * http://focus.ti.com/docs/prod/folders/print/bq27500.html | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/param.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/workqueue.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/power_supply.h> | 
 | #include <linux/idr.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/slab.h> | 
 | #include <asm/unaligned.h> | 
 |  | 
 | #include <linux/power/bq27x00_battery.h> | 
 |  | 
 | #define DRIVER_VERSION			"1.2.0" | 
 |  | 
 | #define BQ27x00_REG_TEMP		0x06 | 
 | #define BQ27x00_REG_VOLT		0x08 | 
 | #define BQ27x00_REG_AI			0x14 | 
 | #define BQ27x00_REG_FLAGS		0x0A | 
 | #define BQ27x00_REG_TTE			0x16 | 
 | #define BQ27x00_REG_TTF			0x18 | 
 | #define BQ27x00_REG_TTECP		0x26 | 
 | #define BQ27x00_REG_NAC			0x0C /* Nominal available capaciy */ | 
 | #define BQ27x00_REG_LMD			0x12 /* Last measured discharge */ | 
 | #define BQ27x00_REG_CYCT		0x2A /* Cycle count total */ | 
 | #define BQ27x00_REG_AE			0x22 /* Available enery */ | 
 |  | 
 | #define BQ27000_REG_RSOC		0x0B /* Relative State-of-Charge */ | 
 | #define BQ27000_REG_ILMD		0x76 /* Initial last measured discharge */ | 
 | #define BQ27000_FLAG_CHGS		BIT(7) | 
 | #define BQ27000_FLAG_FC			BIT(5) | 
 |  | 
 | #define BQ27500_REG_SOC			0x2C | 
 | #define BQ27500_REG_DCAP		0x3C /* Design capacity */ | 
 | #define BQ27500_FLAG_DSC		BIT(0) | 
 | #define BQ27500_FLAG_FC			BIT(9) | 
 |  | 
 | #define BQ27000_RS			20 /* Resistor sense */ | 
 |  | 
 | struct bq27x00_device_info; | 
 | struct bq27x00_access_methods { | 
 | 	int (*read)(struct bq27x00_device_info *di, u8 reg, bool single); | 
 | }; | 
 |  | 
 | enum bq27x00_chip { BQ27000, BQ27500 }; | 
 |  | 
 | struct bq27x00_reg_cache { | 
 | 	int temperature; | 
 | 	int time_to_empty; | 
 | 	int time_to_empty_avg; | 
 | 	int time_to_full; | 
 | 	int charge_full; | 
 | 	int cycle_count; | 
 | 	int capacity; | 
 | 	int flags; | 
 |  | 
 | 	int current_now; | 
 | }; | 
 |  | 
 | struct bq27x00_device_info { | 
 | 	struct device 		*dev; | 
 | 	int			id; | 
 | 	enum bq27x00_chip	chip; | 
 |  | 
 | 	struct bq27x00_reg_cache cache; | 
 | 	int charge_design_full; | 
 |  | 
 | 	unsigned long last_update; | 
 | 	struct delayed_work work; | 
 |  | 
 | 	struct power_supply	bat; | 
 |  | 
 | 	struct bq27x00_access_methods bus; | 
 |  | 
 | 	struct mutex lock; | 
 | }; | 
 |  | 
 | static enum power_supply_property bq27x00_battery_props[] = { | 
 | 	POWER_SUPPLY_PROP_STATUS, | 
 | 	POWER_SUPPLY_PROP_PRESENT, | 
 | 	POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
 | 	POWER_SUPPLY_PROP_CURRENT_NOW, | 
 | 	POWER_SUPPLY_PROP_CAPACITY, | 
 | 	POWER_SUPPLY_PROP_TEMP, | 
 | 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, | 
 | 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, | 
 | 	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, | 
 | 	POWER_SUPPLY_PROP_TECHNOLOGY, | 
 | 	POWER_SUPPLY_PROP_CHARGE_FULL, | 
 | 	POWER_SUPPLY_PROP_CHARGE_NOW, | 
 | 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, | 
 | 	POWER_SUPPLY_PROP_CYCLE_COUNT, | 
 | 	POWER_SUPPLY_PROP_ENERGY_NOW, | 
 | }; | 
 |  | 
 | static unsigned int poll_interval = 360; | 
 | module_param(poll_interval, uint, 0644); | 
 | MODULE_PARM_DESC(poll_interval, "battery poll interval in seconds - " \ | 
 | 				"0 disables polling"); | 
 |  | 
 | /* | 
 |  * Common code for BQ27x00 devices | 
 |  */ | 
 |  | 
 | static inline int bq27x00_read(struct bq27x00_device_info *di, u8 reg, | 
 | 		bool single) | 
 | { | 
 | 	return di->bus.read(di, reg, single); | 
 | } | 
 |  | 
 | /* | 
 |  * Return the battery Relative State-of-Charge | 
 |  * Or < 0 if something fails. | 
 |  */ | 
 | static int bq27x00_battery_read_rsoc(struct bq27x00_device_info *di) | 
 | { | 
 | 	int rsoc; | 
 |  | 
 | 	if (di->chip == BQ27500) | 
 | 		rsoc = bq27x00_read(di, BQ27500_REG_SOC, false); | 
 | 	else | 
 | 		rsoc = bq27x00_read(di, BQ27000_REG_RSOC, true); | 
 |  | 
 | 	if (rsoc < 0) | 
 | 		dev_err(di->dev, "error reading relative State-of-Charge\n"); | 
 |  | 
 | 	return rsoc; | 
 | } | 
 |  | 
 | /* | 
 |  * Return a battery charge value in µAh | 
 |  * Or < 0 if something fails. | 
 |  */ | 
 | static int bq27x00_battery_read_charge(struct bq27x00_device_info *di, u8 reg) | 
 | { | 
 | 	int charge; | 
 |  | 
 | 	charge = bq27x00_read(di, reg, false); | 
 | 	if (charge < 0) { | 
 | 		dev_err(di->dev, "error reading nominal available capacity\n"); | 
 | 		return charge; | 
 | 	} | 
 |  | 
 | 	if (di->chip == BQ27500) | 
 | 		charge *= 1000; | 
 | 	else | 
 | 		charge = charge * 3570 / BQ27000_RS; | 
 |  | 
 | 	return charge; | 
 | } | 
 |  | 
 | /* | 
 |  * Return the battery Nominal available capaciy in µAh | 
 |  * Or < 0 if something fails. | 
 |  */ | 
 | static inline int bq27x00_battery_read_nac(struct bq27x00_device_info *di) | 
 | { | 
 | 	return bq27x00_battery_read_charge(di, BQ27x00_REG_NAC); | 
 | } | 
 |  | 
 | /* | 
 |  * Return the battery Last measured discharge in µAh | 
 |  * Or < 0 if something fails. | 
 |  */ | 
 | static inline int bq27x00_battery_read_lmd(struct bq27x00_device_info *di) | 
 | { | 
 | 	return bq27x00_battery_read_charge(di, BQ27x00_REG_LMD); | 
 | } | 
 |  | 
 | /* | 
 |  * Return the battery Initial last measured discharge in µAh | 
 |  * Or < 0 if something fails. | 
 |  */ | 
 | static int bq27x00_battery_read_ilmd(struct bq27x00_device_info *di) | 
 | { | 
 | 	int ilmd; | 
 |  | 
 | 	if (di->chip == BQ27500) | 
 | 		ilmd = bq27x00_read(di, BQ27500_REG_DCAP, false); | 
 | 	else | 
 | 		ilmd = bq27x00_read(di, BQ27000_REG_ILMD, true); | 
 |  | 
 | 	if (ilmd < 0) { | 
 | 		dev_err(di->dev, "error reading initial last measured discharge\n"); | 
 | 		return ilmd; | 
 | 	} | 
 |  | 
 | 	if (di->chip == BQ27500) | 
 | 		ilmd *= 1000; | 
 | 	else | 
 | 		ilmd = ilmd * 256 * 3570 / BQ27000_RS; | 
 |  | 
 | 	return ilmd; | 
 | } | 
 |  | 
 | /* | 
 |  * Return the battery Cycle count total | 
 |  * Or < 0 if something fails. | 
 |  */ | 
 | static int bq27x00_battery_read_cyct(struct bq27x00_device_info *di) | 
 | { | 
 | 	int cyct; | 
 |  | 
 | 	cyct = bq27x00_read(di, BQ27x00_REG_CYCT, false); | 
 | 	if (cyct < 0) | 
 | 		dev_err(di->dev, "error reading cycle count total\n"); | 
 |  | 
 | 	return cyct; | 
 | } | 
 |  | 
 | /* | 
 |  * Read a time register. | 
 |  * Return < 0 if something fails. | 
 |  */ | 
 | static int bq27x00_battery_read_time(struct bq27x00_device_info *di, u8 reg) | 
 | { | 
 | 	int tval; | 
 |  | 
 | 	tval = bq27x00_read(di, reg, false); | 
 | 	if (tval < 0) { | 
 | 		dev_err(di->dev, "error reading register %02x: %d\n", reg, tval); | 
 | 		return tval; | 
 | 	} | 
 |  | 
 | 	if (tval == 65535) | 
 | 		return -ENODATA; | 
 |  | 
 | 	return tval * 60; | 
 | } | 
 |  | 
 | static void bq27x00_update(struct bq27x00_device_info *di) | 
 | { | 
 | 	struct bq27x00_reg_cache cache = {0, }; | 
 | 	bool is_bq27500 = di->chip == BQ27500; | 
 |  | 
 | 	cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, is_bq27500); | 
 | 	if (cache.flags >= 0) { | 
 | 		cache.capacity = bq27x00_battery_read_rsoc(di); | 
 | 		cache.temperature = bq27x00_read(di, BQ27x00_REG_TEMP, false); | 
 | 		cache.time_to_empty = bq27x00_battery_read_time(di, BQ27x00_REG_TTE); | 
 | 		cache.time_to_empty_avg = bq27x00_battery_read_time(di, BQ27x00_REG_TTECP); | 
 | 		cache.time_to_full = bq27x00_battery_read_time(di, BQ27x00_REG_TTF); | 
 | 		cache.charge_full = bq27x00_battery_read_lmd(di); | 
 | 		cache.cycle_count = bq27x00_battery_read_cyct(di); | 
 |  | 
 | 		if (!is_bq27500) | 
 | 			cache.current_now = bq27x00_read(di, BQ27x00_REG_AI, false); | 
 |  | 
 | 		/* We only have to read charge design full once */ | 
 | 		if (di->charge_design_full <= 0) | 
 | 			di->charge_design_full = bq27x00_battery_read_ilmd(di); | 
 | 	} | 
 |  | 
 | 	/* Ignore current_now which is a snapshot of the current battery state | 
 | 	 * and is likely to be different even between two consecutive reads */ | 
 | 	if (memcmp(&di->cache, &cache, sizeof(cache) - sizeof(int)) != 0) { | 
 | 		di->cache = cache; | 
 | 		power_supply_changed(&di->bat); | 
 | 	} | 
 |  | 
 | 	di->last_update = jiffies; | 
 | } | 
 |  | 
 | static void bq27x00_battery_poll(struct work_struct *work) | 
 | { | 
 | 	struct bq27x00_device_info *di = | 
 | 		container_of(work, struct bq27x00_device_info, work.work); | 
 |  | 
 | 	bq27x00_update(di); | 
 |  | 
 | 	if (poll_interval > 0) { | 
 | 		/* The timer does not have to be accurate. */ | 
 | 		set_timer_slack(&di->work.timer, poll_interval * HZ / 4); | 
 | 		schedule_delayed_work(&di->work, poll_interval * HZ); | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Return the battery temperature in tenths of degree Celsius | 
 |  * Or < 0 if something fails. | 
 |  */ | 
 | static int bq27x00_battery_temperature(struct bq27x00_device_info *di, | 
 | 	union power_supply_propval *val) | 
 | { | 
 | 	if (di->cache.temperature < 0) | 
 | 		return di->cache.temperature; | 
 |  | 
 | 	if (di->chip == BQ27500) | 
 | 		val->intval = di->cache.temperature - 2731; | 
 | 	else | 
 | 		val->intval = ((di->cache.temperature * 5) - 5463) / 2; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Return the battery average current in µA | 
 |  * Note that current can be negative signed as well | 
 |  * Or 0 if something fails. | 
 |  */ | 
 | static int bq27x00_battery_current(struct bq27x00_device_info *di, | 
 | 	union power_supply_propval *val) | 
 | { | 
 | 	int curr; | 
 |  | 
 | 	if (di->chip == BQ27500) | 
 | 	    curr = bq27x00_read(di, BQ27x00_REG_AI, false); | 
 | 	else | 
 | 	    curr = di->cache.current_now; | 
 |  | 
 | 	if (curr < 0) | 
 | 		return curr; | 
 |  | 
 | 	if (di->chip == BQ27500) { | 
 | 		/* bq27500 returns signed value */ | 
 | 		val->intval = (int)((s16)curr) * 1000; | 
 | 	} else { | 
 | 		if (di->cache.flags & BQ27000_FLAG_CHGS) { | 
 | 			dev_dbg(di->dev, "negative current!\n"); | 
 | 			curr = -curr; | 
 | 		} | 
 |  | 
 | 		val->intval = curr * 3570 / BQ27000_RS; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int bq27x00_battery_status(struct bq27x00_device_info *di, | 
 | 	union power_supply_propval *val) | 
 | { | 
 | 	int status; | 
 |  | 
 | 	if (di->chip == BQ27500) { | 
 | 		if (di->cache.flags & BQ27500_FLAG_FC) | 
 | 			status = POWER_SUPPLY_STATUS_FULL; | 
 | 		else if (di->cache.flags & BQ27500_FLAG_DSC) | 
 | 			status = POWER_SUPPLY_STATUS_DISCHARGING; | 
 | 		else | 
 | 			status = POWER_SUPPLY_STATUS_CHARGING; | 
 | 	} else { | 
 | 		if (di->cache.flags & BQ27000_FLAG_FC) | 
 | 			status = POWER_SUPPLY_STATUS_FULL; | 
 | 		else if (di->cache.flags & BQ27000_FLAG_CHGS) | 
 | 			status = POWER_SUPPLY_STATUS_CHARGING; | 
 | 		else if (power_supply_am_i_supplied(&di->bat)) | 
 | 			status = POWER_SUPPLY_STATUS_NOT_CHARGING; | 
 | 		else | 
 | 			status = POWER_SUPPLY_STATUS_DISCHARGING; | 
 | 	} | 
 |  | 
 | 	val->intval = status; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Return the battery Voltage in milivolts | 
 |  * Or < 0 if something fails. | 
 |  */ | 
 | static int bq27x00_battery_voltage(struct bq27x00_device_info *di, | 
 | 	union power_supply_propval *val) | 
 | { | 
 | 	int volt; | 
 |  | 
 | 	volt = bq27x00_read(di, BQ27x00_REG_VOLT, false); | 
 | 	if (volt < 0) | 
 | 		return volt; | 
 |  | 
 | 	val->intval = volt * 1000; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Return the battery Available energy in µWh | 
 |  * Or < 0 if something fails. | 
 |  */ | 
 | static int bq27x00_battery_energy(struct bq27x00_device_info *di, | 
 | 	union power_supply_propval *val) | 
 | { | 
 | 	int ae; | 
 |  | 
 | 	ae = bq27x00_read(di, BQ27x00_REG_AE, false); | 
 | 	if (ae < 0) { | 
 | 		dev_err(di->dev, "error reading available energy\n"); | 
 | 		return ae; | 
 | 	} | 
 |  | 
 | 	if (di->chip == BQ27500) | 
 | 		ae *= 1000; | 
 | 	else | 
 | 		ae = ae * 29200 / BQ27000_RS; | 
 |  | 
 | 	val->intval = ae; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int bq27x00_simple_value(int value, | 
 | 	union power_supply_propval *val) | 
 | { | 
 | 	if (value < 0) | 
 | 		return value; | 
 |  | 
 | 	val->intval = value; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #define to_bq27x00_device_info(x) container_of((x), \ | 
 | 				struct bq27x00_device_info, bat); | 
 |  | 
 | static int bq27x00_battery_get_property(struct power_supply *psy, | 
 | 					enum power_supply_property psp, | 
 | 					union power_supply_propval *val) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct bq27x00_device_info *di = to_bq27x00_device_info(psy); | 
 |  | 
 | 	mutex_lock(&di->lock); | 
 | 	if (time_is_before_jiffies(di->last_update + 5 * HZ)) { | 
 | 		cancel_delayed_work_sync(&di->work); | 
 | 		bq27x00_battery_poll(&di->work.work); | 
 | 	} | 
 | 	mutex_unlock(&di->lock); | 
 |  | 
 | 	if (psp != POWER_SUPPLY_PROP_PRESENT && di->cache.flags < 0) | 
 | 		return -ENODEV; | 
 |  | 
 | 	switch (psp) { | 
 | 	case POWER_SUPPLY_PROP_STATUS: | 
 | 		ret = bq27x00_battery_status(di, val); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_VOLTAGE_NOW: | 
 | 		ret = bq27x00_battery_voltage(di, val); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_PRESENT: | 
 | 		val->intval = di->cache.flags < 0 ? 0 : 1; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CURRENT_NOW: | 
 | 		ret = bq27x00_battery_current(di, val); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CAPACITY: | 
 | 		ret = bq27x00_simple_value(di->cache.capacity, val); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_TEMP: | 
 | 		ret = bq27x00_battery_temperature(di, val); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: | 
 | 		ret = bq27x00_simple_value(di->cache.time_to_empty, val); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: | 
 | 		ret = bq27x00_simple_value(di->cache.time_to_empty_avg, val); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW: | 
 | 		ret = bq27x00_simple_value(di->cache.time_to_full, val); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_TECHNOLOGY: | 
 | 		val->intval = POWER_SUPPLY_TECHNOLOGY_LION; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CHARGE_NOW: | 
 | 		ret = bq27x00_simple_value(bq27x00_battery_read_nac(di), val); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CHARGE_FULL: | 
 | 		ret = bq27x00_simple_value(di->cache.charge_full, val); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: | 
 | 		ret = bq27x00_simple_value(di->charge_design_full, val); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CYCLE_COUNT: | 
 | 		ret = bq27x00_simple_value(di->cache.cycle_count, val); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_ENERGY_NOW: | 
 | 		ret = bq27x00_battery_energy(di, val); | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void bq27x00_external_power_changed(struct power_supply *psy) | 
 | { | 
 | 	struct bq27x00_device_info *di = to_bq27x00_device_info(psy); | 
 |  | 
 | 	cancel_delayed_work_sync(&di->work); | 
 | 	schedule_delayed_work(&di->work, 0); | 
 | } | 
 |  | 
 | static int bq27x00_powersupply_init(struct bq27x00_device_info *di) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	di->bat.type = POWER_SUPPLY_TYPE_BATTERY; | 
 | 	di->bat.properties = bq27x00_battery_props; | 
 | 	di->bat.num_properties = ARRAY_SIZE(bq27x00_battery_props); | 
 | 	di->bat.get_property = bq27x00_battery_get_property; | 
 | 	di->bat.external_power_changed = bq27x00_external_power_changed; | 
 |  | 
 | 	INIT_DELAYED_WORK(&di->work, bq27x00_battery_poll); | 
 | 	mutex_init(&di->lock); | 
 |  | 
 | 	ret = power_supply_register(di->dev, &di->bat); | 
 | 	if (ret) { | 
 | 		dev_err(di->dev, "failed to register battery: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	dev_info(di->dev, "support ver. %s enabled\n", DRIVER_VERSION); | 
 |  | 
 | 	bq27x00_update(di); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void bq27x00_powersupply_unregister(struct bq27x00_device_info *di) | 
 | { | 
 | 	cancel_delayed_work_sync(&di->work); | 
 |  | 
 | 	power_supply_unregister(&di->bat); | 
 |  | 
 | 	mutex_destroy(&di->lock); | 
 | } | 
 |  | 
 |  | 
 | /* i2c specific code */ | 
 | #ifdef CONFIG_BATTERY_BQ27X00_I2C | 
 |  | 
 | /* If the system has several batteries we need a different name for each | 
 |  * of them... | 
 |  */ | 
 | static DEFINE_IDR(battery_id); | 
 | static DEFINE_MUTEX(battery_mutex); | 
 |  | 
 | static int bq27x00_read_i2c(struct bq27x00_device_info *di, u8 reg, bool single) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(di->dev); | 
 | 	struct i2c_msg msg[2]; | 
 | 	unsigned char data[2]; | 
 | 	int ret; | 
 |  | 
 | 	if (!client->adapter) | 
 | 		return -ENODEV; | 
 |  | 
 | 	msg[0].addr = client->addr; | 
 | 	msg[0].flags = 0; | 
 | 	msg[0].buf = ® | 
 | 	msg[0].len = sizeof(reg); | 
 | 	msg[1].addr = client->addr; | 
 | 	msg[1].flags = I2C_M_RD; | 
 | 	msg[1].buf = data; | 
 | 	if (single) | 
 | 		msg[1].len = 1; | 
 | 	else | 
 | 		msg[1].len = 2; | 
 |  | 
 | 	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	if (!single) | 
 | 		ret = get_unaligned_le16(data); | 
 | 	else | 
 | 		ret = data[0]; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int bq27x00_battery_probe(struct i2c_client *client, | 
 | 				 const struct i2c_device_id *id) | 
 | { | 
 | 	char *name; | 
 | 	struct bq27x00_device_info *di; | 
 | 	int num; | 
 | 	int retval = 0; | 
 |  | 
 | 	/* Get new ID for the new battery device */ | 
 | 	retval = idr_pre_get(&battery_id, GFP_KERNEL); | 
 | 	if (retval == 0) | 
 | 		return -ENOMEM; | 
 | 	mutex_lock(&battery_mutex); | 
 | 	retval = idr_get_new(&battery_id, client, &num); | 
 | 	mutex_unlock(&battery_mutex); | 
 | 	if (retval < 0) | 
 | 		return retval; | 
 |  | 
 | 	name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num); | 
 | 	if (!name) { | 
 | 		dev_err(&client->dev, "failed to allocate device name\n"); | 
 | 		retval = -ENOMEM; | 
 | 		goto batt_failed_1; | 
 | 	} | 
 |  | 
 | 	di = kzalloc(sizeof(*di), GFP_KERNEL); | 
 | 	if (!di) { | 
 | 		dev_err(&client->dev, "failed to allocate device info data\n"); | 
 | 		retval = -ENOMEM; | 
 | 		goto batt_failed_2; | 
 | 	} | 
 |  | 
 | 	di->id = num; | 
 | 	di->dev = &client->dev; | 
 | 	di->chip = id->driver_data; | 
 | 	di->bat.name = name; | 
 | 	di->bus.read = &bq27x00_read_i2c; | 
 |  | 
 | 	if (bq27x00_powersupply_init(di)) | 
 | 		goto batt_failed_3; | 
 |  | 
 | 	i2c_set_clientdata(client, di); | 
 |  | 
 | 	return 0; | 
 |  | 
 | batt_failed_3: | 
 | 	kfree(di); | 
 | batt_failed_2: | 
 | 	kfree(name); | 
 | batt_failed_1: | 
 | 	mutex_lock(&battery_mutex); | 
 | 	idr_remove(&battery_id, num); | 
 | 	mutex_unlock(&battery_mutex); | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int bq27x00_battery_remove(struct i2c_client *client) | 
 | { | 
 | 	struct bq27x00_device_info *di = i2c_get_clientdata(client); | 
 |  | 
 | 	bq27x00_powersupply_unregister(di); | 
 |  | 
 | 	kfree(di->bat.name); | 
 |  | 
 | 	mutex_lock(&battery_mutex); | 
 | 	idr_remove(&battery_id, di->id); | 
 | 	mutex_unlock(&battery_mutex); | 
 |  | 
 | 	kfree(di); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id bq27x00_id[] = { | 
 | 	{ "bq27200", BQ27000 },	/* bq27200 is same as bq27000, but with i2c */ | 
 | 	{ "bq27500", BQ27500 }, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, bq27x00_id); | 
 |  | 
 | static struct i2c_driver bq27x00_battery_driver = { | 
 | 	.driver = { | 
 | 		.name = "bq27x00-battery", | 
 | 	}, | 
 | 	.probe = bq27x00_battery_probe, | 
 | 	.remove = bq27x00_battery_remove, | 
 | 	.id_table = bq27x00_id, | 
 | }; | 
 |  | 
 | static inline int bq27x00_battery_i2c_init(void) | 
 | { | 
 | 	int ret = i2c_add_driver(&bq27x00_battery_driver); | 
 | 	if (ret) | 
 | 		printk(KERN_ERR "Unable to register BQ27x00 i2c driver\n"); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static inline void bq27x00_battery_i2c_exit(void) | 
 | { | 
 | 	i2c_del_driver(&bq27x00_battery_driver); | 
 | } | 
 |  | 
 | #else | 
 |  | 
 | static inline int bq27x00_battery_i2c_init(void) { return 0; } | 
 | static inline void bq27x00_battery_i2c_exit(void) {}; | 
 |  | 
 | #endif | 
 |  | 
 | /* platform specific code */ | 
 | #ifdef CONFIG_BATTERY_BQ27X00_PLATFORM | 
 |  | 
 | static int bq27000_read_platform(struct bq27x00_device_info *di, u8 reg, | 
 | 			bool single) | 
 | { | 
 | 	struct device *dev = di->dev; | 
 | 	struct bq27000_platform_data *pdata = dev->platform_data; | 
 | 	unsigned int timeout = 3; | 
 | 	int upper, lower; | 
 | 	int temp; | 
 |  | 
 | 	if (!single) { | 
 | 		/* Make sure the value has not changed in between reading the | 
 | 		 * lower and the upper part */ | 
 | 		upper = pdata->read(dev, reg + 1); | 
 | 		do { | 
 | 			temp = upper; | 
 | 			if (upper < 0) | 
 | 				return upper; | 
 |  | 
 | 			lower = pdata->read(dev, reg); | 
 | 			if (lower < 0) | 
 | 				return lower; | 
 |  | 
 | 			upper = pdata->read(dev, reg + 1); | 
 | 		} while (temp != upper && --timeout); | 
 |  | 
 | 		if (timeout == 0) | 
 | 			return -EIO; | 
 |  | 
 | 		return (upper << 8) | lower; | 
 | 	} | 
 |  | 
 | 	return pdata->read(dev, reg); | 
 | } | 
 |  | 
 | static int __devinit bq27000_battery_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct bq27x00_device_info *di; | 
 | 	struct bq27000_platform_data *pdata = pdev->dev.platform_data; | 
 | 	int ret; | 
 |  | 
 | 	if (!pdata) { | 
 | 		dev_err(&pdev->dev, "no platform_data supplied\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (!pdata->read) { | 
 | 		dev_err(&pdev->dev, "no hdq read callback supplied\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	di = kzalloc(sizeof(*di), GFP_KERNEL); | 
 | 	if (!di) { | 
 | 		dev_err(&pdev->dev, "failed to allocate device info data\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, di); | 
 |  | 
 | 	di->dev = &pdev->dev; | 
 | 	di->chip = BQ27000; | 
 |  | 
 | 	di->bat.name = pdata->name ?: dev_name(&pdev->dev); | 
 | 	di->bus.read = &bq27000_read_platform; | 
 |  | 
 | 	ret = bq27x00_powersupply_init(di); | 
 | 	if (ret) | 
 | 		goto err_free; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_free: | 
 | 	platform_set_drvdata(pdev, NULL); | 
 | 	kfree(di); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __devexit bq27000_battery_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct bq27x00_device_info *di = platform_get_drvdata(pdev); | 
 |  | 
 | 	bq27x00_powersupply_unregister(di); | 
 |  | 
 | 	platform_set_drvdata(pdev, NULL); | 
 | 	kfree(di); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver bq27000_battery_driver = { | 
 | 	.probe	= bq27000_battery_probe, | 
 | 	.remove = __devexit_p(bq27000_battery_remove), | 
 | 	.driver = { | 
 | 		.name = "bq27000-battery", | 
 | 		.owner = THIS_MODULE, | 
 | 	}, | 
 | }; | 
 |  | 
 | static inline int bq27x00_battery_platform_init(void) | 
 | { | 
 | 	int ret = platform_driver_register(&bq27000_battery_driver); | 
 | 	if (ret) | 
 | 		printk(KERN_ERR "Unable to register BQ27000 platform driver\n"); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static inline void bq27x00_battery_platform_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&bq27000_battery_driver); | 
 | } | 
 |  | 
 | #else | 
 |  | 
 | static inline int bq27x00_battery_platform_init(void) { return 0; } | 
 | static inline void bq27x00_battery_platform_exit(void) {}; | 
 |  | 
 | #endif | 
 |  | 
 | /* | 
 |  * Module stuff | 
 |  */ | 
 |  | 
 | static int __init bq27x00_battery_init(void) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = bq27x00_battery_i2c_init(); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = bq27x00_battery_platform_init(); | 
 | 	if (ret) | 
 | 		bq27x00_battery_i2c_exit(); | 
 |  | 
 | 	return ret; | 
 | } | 
 | module_init(bq27x00_battery_init); | 
 |  | 
 | static void __exit bq27x00_battery_exit(void) | 
 | { | 
 | 	bq27x00_battery_platform_exit(); | 
 | 	bq27x00_battery_i2c_exit(); | 
 | } | 
 | module_exit(bq27x00_battery_exit); | 
 |  | 
 | MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); | 
 | MODULE_DESCRIPTION("BQ27x00 battery monitor driver"); | 
 | MODULE_LICENSE("GPL"); |