|  | /* | 
|  | * wm8961.c  --  WM8961 ALSA SoC Audio driver | 
|  | * | 
|  | * Author: Mark Brown | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * Currently unimplemented features: | 
|  | *  - ALC | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/pm.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/slab.h> | 
|  | #include <sound/core.h> | 
|  | #include <sound/pcm.h> | 
|  | #include <sound/pcm_params.h> | 
|  | #include <sound/soc.h> | 
|  | #include <sound/initval.h> | 
|  | #include <sound/tlv.h> | 
|  |  | 
|  | #include "wm8961.h" | 
|  |  | 
|  | #define WM8961_MAX_REGISTER                     0xFC | 
|  |  | 
|  | static u16 wm8961_reg_defaults[] = { | 
|  | 0x009F,     /* R0   - Left Input volume */ | 
|  | 0x009F,     /* R1   - Right Input volume */ | 
|  | 0x0000,     /* R2   - LOUT1 volume */ | 
|  | 0x0000,     /* R3   - ROUT1 volume */ | 
|  | 0x0020,     /* R4   - Clocking1 */ | 
|  | 0x0008,     /* R5   - ADC & DAC Control 1 */ | 
|  | 0x0000,     /* R6   - ADC & DAC Control 2 */ | 
|  | 0x000A,     /* R7   - Audio Interface 0 */ | 
|  | 0x01F4,     /* R8   - Clocking2 */ | 
|  | 0x0000,     /* R9   - Audio Interface 1 */ | 
|  | 0x00FF,     /* R10  - Left DAC volume */ | 
|  | 0x00FF,     /* R11  - Right DAC volume */ | 
|  | 0x0000,     /* R12 */ | 
|  | 0x0000,     /* R13 */ | 
|  | 0x0040,     /* R14  - Audio Interface 2 */ | 
|  | 0x0000,     /* R15  - Software Reset */ | 
|  | 0x0000,     /* R16 */ | 
|  | 0x007B,     /* R17  - ALC1 */ | 
|  | 0x0000,     /* R18  - ALC2 */ | 
|  | 0x0032,     /* R19  - ALC3 */ | 
|  | 0x0000,     /* R20  - Noise Gate */ | 
|  | 0x00C0,     /* R21  - Left ADC volume */ | 
|  | 0x00C0,     /* R22  - Right ADC volume */ | 
|  | 0x0120,     /* R23  - Additional control(1) */ | 
|  | 0x0000,     /* R24  - Additional control(2) */ | 
|  | 0x0000,     /* R25  - Pwr Mgmt (1) */ | 
|  | 0x0000,     /* R26  - Pwr Mgmt (2) */ | 
|  | 0x0000,     /* R27  - Additional Control (3) */ | 
|  | 0x0000,     /* R28  - Anti-pop */ | 
|  | 0x0000,     /* R29 */ | 
|  | 0x005F,     /* R30  - Clocking 3 */ | 
|  | 0x0000,     /* R31 */ | 
|  | 0x0000,     /* R32  - ADCL signal path */ | 
|  | 0x0000,     /* R33  - ADCR signal path */ | 
|  | 0x0000,     /* R34 */ | 
|  | 0x0000,     /* R35 */ | 
|  | 0x0000,     /* R36 */ | 
|  | 0x0000,     /* R37 */ | 
|  | 0x0000,     /* R38 */ | 
|  | 0x0000,     /* R39 */ | 
|  | 0x0000,     /* R40  - LOUT2 volume */ | 
|  | 0x0000,     /* R41  - ROUT2 volume */ | 
|  | 0x0000,     /* R42 */ | 
|  | 0x0000,     /* R43 */ | 
|  | 0x0000,     /* R44 */ | 
|  | 0x0000,     /* R45 */ | 
|  | 0x0000,     /* R46 */ | 
|  | 0x0000,     /* R47  - Pwr Mgmt (3) */ | 
|  | 0x0023,     /* R48  - Additional Control (4) */ | 
|  | 0x0000,     /* R49  - Class D Control 1 */ | 
|  | 0x0000,     /* R50 */ | 
|  | 0x0003,     /* R51  - Class D Control 2 */ | 
|  | 0x0000,     /* R52 */ | 
|  | 0x0000,     /* R53 */ | 
|  | 0x0000,     /* R54 */ | 
|  | 0x0000,     /* R55 */ | 
|  | 0x0106,     /* R56  - Clocking 4 */ | 
|  | 0x0000,     /* R57  - DSP Sidetone 0 */ | 
|  | 0x0000,     /* R58  - DSP Sidetone 1 */ | 
|  | 0x0000,     /* R59 */ | 
|  | 0x0000,     /* R60  - DC Servo 0 */ | 
|  | 0x0000,     /* R61  - DC Servo 1 */ | 
|  | 0x0000,     /* R62 */ | 
|  | 0x015E,     /* R63  - DC Servo 3 */ | 
|  | 0x0010,     /* R64 */ | 
|  | 0x0010,     /* R65  - DC Servo 5 */ | 
|  | 0x0000,     /* R66 */ | 
|  | 0x0001,     /* R67 */ | 
|  | 0x0003,     /* R68  - Analogue PGA Bias */ | 
|  | 0x0000,     /* R69  - Analogue HP 0 */ | 
|  | 0x0060,     /* R70 */ | 
|  | 0x01FB,     /* R71  - Analogue HP 2 */ | 
|  | 0x0000,     /* R72  - Charge Pump 1 */ | 
|  | 0x0065,     /* R73 */ | 
|  | 0x005F,     /* R74 */ | 
|  | 0x0059,     /* R75 */ | 
|  | 0x006B,     /* R76 */ | 
|  | 0x0038,     /* R77 */ | 
|  | 0x000C,     /* R78 */ | 
|  | 0x000A,     /* R79 */ | 
|  | 0x006B,     /* R80 */ | 
|  | 0x0000,     /* R81 */ | 
|  | 0x0000,     /* R82  - Charge Pump B */ | 
|  | 0x0087,     /* R83 */ | 
|  | 0x0000,     /* R84 */ | 
|  | 0x005C,     /* R85 */ | 
|  | 0x0000,     /* R86 */ | 
|  | 0x0000,     /* R87  - Write Sequencer 1 */ | 
|  | 0x0000,     /* R88  - Write Sequencer 2 */ | 
|  | 0x0000,     /* R89  - Write Sequencer 3 */ | 
|  | 0x0000,     /* R90  - Write Sequencer 4 */ | 
|  | 0x0000,     /* R91  - Write Sequencer 5 */ | 
|  | 0x0000,     /* R92  - Write Sequencer 6 */ | 
|  | 0x0000,     /* R93  - Write Sequencer 7 */ | 
|  | 0x0000,     /* R94 */ | 
|  | 0x0000,     /* R95 */ | 
|  | 0x0000,     /* R96 */ | 
|  | 0x0000,     /* R97 */ | 
|  | 0x0000,     /* R98 */ | 
|  | 0x0000,     /* R99 */ | 
|  | 0x0000,     /* R100 */ | 
|  | 0x0000,     /* R101 */ | 
|  | 0x0000,     /* R102 */ | 
|  | 0x0000,     /* R103 */ | 
|  | 0x0000,     /* R104 */ | 
|  | 0x0000,     /* R105 */ | 
|  | 0x0000,     /* R106 */ | 
|  | 0x0000,     /* R107 */ | 
|  | 0x0000,     /* R108 */ | 
|  | 0x0000,     /* R109 */ | 
|  | 0x0000,     /* R110 */ | 
|  | 0x0000,     /* R111 */ | 
|  | 0x0000,     /* R112 */ | 
|  | 0x0000,     /* R113 */ | 
|  | 0x0000,     /* R114 */ | 
|  | 0x0000,     /* R115 */ | 
|  | 0x0000,     /* R116 */ | 
|  | 0x0000,     /* R117 */ | 
|  | 0x0000,     /* R118 */ | 
|  | 0x0000,     /* R119 */ | 
|  | 0x0000,     /* R120 */ | 
|  | 0x0000,     /* R121 */ | 
|  | 0x0000,     /* R122 */ | 
|  | 0x0000,     /* R123 */ | 
|  | 0x0000,     /* R124 */ | 
|  | 0x0000,     /* R125 */ | 
|  | 0x0000,     /* R126 */ | 
|  | 0x0000,     /* R127 */ | 
|  | 0x0000,     /* R128 */ | 
|  | 0x0000,     /* R129 */ | 
|  | 0x0000,     /* R130 */ | 
|  | 0x0000,     /* R131 */ | 
|  | 0x0000,     /* R132 */ | 
|  | 0x0000,     /* R133 */ | 
|  | 0x0000,     /* R134 */ | 
|  | 0x0000,     /* R135 */ | 
|  | 0x0000,     /* R136 */ | 
|  | 0x0000,     /* R137 */ | 
|  | 0x0000,     /* R138 */ | 
|  | 0x0000,     /* R139 */ | 
|  | 0x0000,     /* R140 */ | 
|  | 0x0000,     /* R141 */ | 
|  | 0x0000,     /* R142 */ | 
|  | 0x0000,     /* R143 */ | 
|  | 0x0000,     /* R144 */ | 
|  | 0x0000,     /* R145 */ | 
|  | 0x0000,     /* R146 */ | 
|  | 0x0000,     /* R147 */ | 
|  | 0x0000,     /* R148 */ | 
|  | 0x0000,     /* R149 */ | 
|  | 0x0000,     /* R150 */ | 
|  | 0x0000,     /* R151 */ | 
|  | 0x0000,     /* R152 */ | 
|  | 0x0000,     /* R153 */ | 
|  | 0x0000,     /* R154 */ | 
|  | 0x0000,     /* R155 */ | 
|  | 0x0000,     /* R156 */ | 
|  | 0x0000,     /* R157 */ | 
|  | 0x0000,     /* R158 */ | 
|  | 0x0000,     /* R159 */ | 
|  | 0x0000,     /* R160 */ | 
|  | 0x0000,     /* R161 */ | 
|  | 0x0000,     /* R162 */ | 
|  | 0x0000,     /* R163 */ | 
|  | 0x0000,     /* R164 */ | 
|  | 0x0000,     /* R165 */ | 
|  | 0x0000,     /* R166 */ | 
|  | 0x0000,     /* R167 */ | 
|  | 0x0000,     /* R168 */ | 
|  | 0x0000,     /* R169 */ | 
|  | 0x0000,     /* R170 */ | 
|  | 0x0000,     /* R171 */ | 
|  | 0x0000,     /* R172 */ | 
|  | 0x0000,     /* R173 */ | 
|  | 0x0000,     /* R174 */ | 
|  | 0x0000,     /* R175 */ | 
|  | 0x0000,     /* R176 */ | 
|  | 0x0000,     /* R177 */ | 
|  | 0x0000,     /* R178 */ | 
|  | 0x0000,     /* R179 */ | 
|  | 0x0000,     /* R180 */ | 
|  | 0x0000,     /* R181 */ | 
|  | 0x0000,     /* R182 */ | 
|  | 0x0000,     /* R183 */ | 
|  | 0x0000,     /* R184 */ | 
|  | 0x0000,     /* R185 */ | 
|  | 0x0000,     /* R186 */ | 
|  | 0x0000,     /* R187 */ | 
|  | 0x0000,     /* R188 */ | 
|  | 0x0000,     /* R189 */ | 
|  | 0x0000,     /* R190 */ | 
|  | 0x0000,     /* R191 */ | 
|  | 0x0000,     /* R192 */ | 
|  | 0x0000,     /* R193 */ | 
|  | 0x0000,     /* R194 */ | 
|  | 0x0000,     /* R195 */ | 
|  | 0x0030,     /* R196 */ | 
|  | 0x0006,     /* R197 */ | 
|  | 0x0000,     /* R198 */ | 
|  | 0x0060,     /* R199 */ | 
|  | 0x0000,     /* R200 */ | 
|  | 0x003F,     /* R201 */ | 
|  | 0x0000,     /* R202 */ | 
|  | 0x0000,     /* R203 */ | 
|  | 0x0000,     /* R204 */ | 
|  | 0x0001,     /* R205 */ | 
|  | 0x0000,     /* R206 */ | 
|  | 0x0181,     /* R207 */ | 
|  | 0x0005,     /* R208 */ | 
|  | 0x0008,     /* R209 */ | 
|  | 0x0008,     /* R210 */ | 
|  | 0x0000,     /* R211 */ | 
|  | 0x013B,     /* R212 */ | 
|  | 0x0000,     /* R213 */ | 
|  | 0x0000,     /* R214 */ | 
|  | 0x0000,     /* R215 */ | 
|  | 0x0000,     /* R216 */ | 
|  | 0x0070,     /* R217 */ | 
|  | 0x0000,     /* R218 */ | 
|  | 0x0000,     /* R219 */ | 
|  | 0x0000,     /* R220 */ | 
|  | 0x0000,     /* R221 */ | 
|  | 0x0000,     /* R222 */ | 
|  | 0x0003,     /* R223 */ | 
|  | 0x0000,     /* R224 */ | 
|  | 0x0000,     /* R225 */ | 
|  | 0x0001,     /* R226 */ | 
|  | 0x0008,     /* R227 */ | 
|  | 0x0000,     /* R228 */ | 
|  | 0x0000,     /* R229 */ | 
|  | 0x0000,     /* R230 */ | 
|  | 0x0000,     /* R231 */ | 
|  | 0x0004,     /* R232 */ | 
|  | 0x0000,     /* R233 */ | 
|  | 0x0000,     /* R234 */ | 
|  | 0x0000,     /* R235 */ | 
|  | 0x0000,     /* R236 */ | 
|  | 0x0000,     /* R237 */ | 
|  | 0x0080,     /* R238 */ | 
|  | 0x0000,     /* R239 */ | 
|  | 0x0000,     /* R240 */ | 
|  | 0x0000,     /* R241 */ | 
|  | 0x0000,     /* R242 */ | 
|  | 0x0000,     /* R243 */ | 
|  | 0x0000,     /* R244 */ | 
|  | 0x0052,     /* R245 */ | 
|  | 0x0110,     /* R246 */ | 
|  | 0x0040,     /* R247 */ | 
|  | 0x0000,     /* R248 */ | 
|  | 0x0030,     /* R249 */ | 
|  | 0x0000,     /* R250 */ | 
|  | 0x0000,     /* R251 */ | 
|  | 0x0001,     /* R252 - General test 1 */ | 
|  | }; | 
|  |  | 
|  | struct wm8961_priv { | 
|  | enum snd_soc_control_type control_type; | 
|  | int sysclk; | 
|  | }; | 
|  |  | 
|  | static int wm8961_volatile_register(struct snd_soc_codec *codec, unsigned int reg) | 
|  | { | 
|  | switch (reg) { | 
|  | case WM8961_SOFTWARE_RESET: | 
|  | case WM8961_WRITE_SEQUENCER_7: | 
|  | case WM8961_DC_SERVO_1: | 
|  | return 1; | 
|  |  | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int wm8961_reset(struct snd_soc_codec *codec) | 
|  | { | 
|  | return snd_soc_write(codec, WM8961_SOFTWARE_RESET, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The headphone output supports special anti-pop sequences giving | 
|  | * silent power up and power down. | 
|  | */ | 
|  | static int wm8961_hp_event(struct snd_soc_dapm_widget *w, | 
|  | struct snd_kcontrol *kcontrol, int event) | 
|  | { | 
|  | struct snd_soc_codec *codec = w->codec; | 
|  | u16 hp_reg = snd_soc_read(codec, WM8961_ANALOGUE_HP_0); | 
|  | u16 cp_reg = snd_soc_read(codec, WM8961_CHARGE_PUMP_1); | 
|  | u16 pwr_reg = snd_soc_read(codec, WM8961_PWR_MGMT_2); | 
|  | u16 dcs_reg = snd_soc_read(codec, WM8961_DC_SERVO_1); | 
|  | int timeout = 500; | 
|  |  | 
|  | if (event & SND_SOC_DAPM_POST_PMU) { | 
|  | /* Make sure the output is shorted */ | 
|  | hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT); | 
|  | snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); | 
|  |  | 
|  | /* Enable the charge pump */ | 
|  | cp_reg |= WM8961_CP_ENA; | 
|  | snd_soc_write(codec, WM8961_CHARGE_PUMP_1, cp_reg); | 
|  | mdelay(5); | 
|  |  | 
|  | /* Enable the PGA */ | 
|  | pwr_reg |= WM8961_LOUT1_PGA | WM8961_ROUT1_PGA; | 
|  | snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg); | 
|  |  | 
|  | /* Enable the amplifier */ | 
|  | hp_reg |= WM8961_HPR_ENA | WM8961_HPL_ENA; | 
|  | snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); | 
|  |  | 
|  | /* Second stage enable */ | 
|  | hp_reg |= WM8961_HPR_ENA_DLY | WM8961_HPL_ENA_DLY; | 
|  | snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); | 
|  |  | 
|  | /* Enable the DC servo & trigger startup */ | 
|  | dcs_reg |= | 
|  | WM8961_DCS_ENA_CHAN_HPR | WM8961_DCS_TRIG_STARTUP_HPR | | 
|  | WM8961_DCS_ENA_CHAN_HPL | WM8961_DCS_TRIG_STARTUP_HPL; | 
|  | dev_dbg(codec->dev, "Enabling DC servo\n"); | 
|  |  | 
|  | snd_soc_write(codec, WM8961_DC_SERVO_1, dcs_reg); | 
|  | do { | 
|  | msleep(1); | 
|  | dcs_reg = snd_soc_read(codec, WM8961_DC_SERVO_1); | 
|  | } while (--timeout && | 
|  | dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR | | 
|  | WM8961_DCS_TRIG_STARTUP_HPL)); | 
|  | if (dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR | | 
|  | WM8961_DCS_TRIG_STARTUP_HPL)) | 
|  | dev_err(codec->dev, "DC servo timed out\n"); | 
|  | else | 
|  | dev_dbg(codec->dev, "DC servo startup complete\n"); | 
|  |  | 
|  | /* Enable the output stage */ | 
|  | hp_reg |= WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP; | 
|  | snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); | 
|  |  | 
|  | /* Remove the short on the output stage */ | 
|  | hp_reg |= WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT; | 
|  | snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); | 
|  | } | 
|  |  | 
|  | if (event & SND_SOC_DAPM_PRE_PMD) { | 
|  | /* Short the output */ | 
|  | hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT); | 
|  | snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); | 
|  |  | 
|  | /* Disable the output stage */ | 
|  | hp_reg &= ~(WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP); | 
|  | snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); | 
|  |  | 
|  | /* Disable DC offset cancellation */ | 
|  | dcs_reg &= ~(WM8961_DCS_ENA_CHAN_HPR | | 
|  | WM8961_DCS_ENA_CHAN_HPL); | 
|  | snd_soc_write(codec, WM8961_DC_SERVO_1, dcs_reg); | 
|  |  | 
|  | /* Finish up */ | 
|  | hp_reg &= ~(WM8961_HPR_ENA_DLY | WM8961_HPR_ENA | | 
|  | WM8961_HPL_ENA_DLY | WM8961_HPL_ENA); | 
|  | snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); | 
|  |  | 
|  | /* Disable the PGA */ | 
|  | pwr_reg &= ~(WM8961_LOUT1_PGA | WM8961_ROUT1_PGA); | 
|  | snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg); | 
|  |  | 
|  | /* Disable the charge pump */ | 
|  | dev_dbg(codec->dev, "Disabling charge pump\n"); | 
|  | snd_soc_write(codec, WM8961_CHARGE_PUMP_1, | 
|  | cp_reg & ~WM8961_CP_ENA); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8961_spk_event(struct snd_soc_dapm_widget *w, | 
|  | struct snd_kcontrol *kcontrol, int event) | 
|  | { | 
|  | struct snd_soc_codec *codec = w->codec; | 
|  | u16 pwr_reg = snd_soc_read(codec, WM8961_PWR_MGMT_2); | 
|  | u16 spk_reg = snd_soc_read(codec, WM8961_CLASS_D_CONTROL_1); | 
|  |  | 
|  | if (event & SND_SOC_DAPM_POST_PMU) { | 
|  | /* Enable the PGA */ | 
|  | pwr_reg |= WM8961_SPKL_PGA | WM8961_SPKR_PGA; | 
|  | snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg); | 
|  |  | 
|  | /* Enable the amplifier */ | 
|  | spk_reg |= WM8961_SPKL_ENA | WM8961_SPKR_ENA; | 
|  | snd_soc_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg); | 
|  | } | 
|  |  | 
|  | if (event & SND_SOC_DAPM_PRE_PMD) { | 
|  | /* Enable the amplifier */ | 
|  | spk_reg &= ~(WM8961_SPKL_ENA | WM8961_SPKR_ENA); | 
|  | snd_soc_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg); | 
|  |  | 
|  | /* Enable the PGA */ | 
|  | pwr_reg &= ~(WM8961_SPKL_PGA | WM8961_SPKR_PGA); | 
|  | snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const char *adc_hpf_text[] = { | 
|  | "Hi-fi", "Voice 1", "Voice 2", "Voice 3", | 
|  | }; | 
|  |  | 
|  | static const struct soc_enum adc_hpf = | 
|  | SOC_ENUM_SINGLE(WM8961_ADC_DAC_CONTROL_2, 7, 4, adc_hpf_text); | 
|  |  | 
|  | static const char *dac_deemph_text[] = { | 
|  | "None", "32kHz", "44.1kHz", "48kHz", | 
|  | }; | 
|  |  | 
|  | static const struct soc_enum dac_deemph = | 
|  | SOC_ENUM_SINGLE(WM8961_ADC_DAC_CONTROL_1, 1, 4, dac_deemph_text); | 
|  |  | 
|  | static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); | 
|  | static const DECLARE_TLV_DB_SCALE(hp_sec_tlv, -700, 100, 0); | 
|  | static const DECLARE_TLV_DB_SCALE(adc_tlv, -7200, 75, 1); | 
|  | static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0); | 
|  | static unsigned int boost_tlv[] = { | 
|  | TLV_DB_RANGE_HEAD(4), | 
|  | 0, 0, TLV_DB_SCALE_ITEM(0,  0, 0), | 
|  | 1, 1, TLV_DB_SCALE_ITEM(13, 0, 0), | 
|  | 2, 2, TLV_DB_SCALE_ITEM(20, 0, 0), | 
|  | 3, 3, TLV_DB_SCALE_ITEM(29, 0, 0), | 
|  | }; | 
|  | static const DECLARE_TLV_DB_SCALE(pga_tlv, -2325, 75, 0); | 
|  |  | 
|  | static const struct snd_kcontrol_new wm8961_snd_controls[] = { | 
|  | SOC_DOUBLE_R_TLV("Headphone Volume", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME, | 
|  | 0, 127, 0, out_tlv), | 
|  | SOC_DOUBLE_TLV("Headphone Secondary Volume", WM8961_ANALOGUE_HP_2, | 
|  | 6, 3, 7, 0, hp_sec_tlv), | 
|  | SOC_DOUBLE_R("Headphone ZC Switch", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME, | 
|  | 7, 1, 0), | 
|  |  | 
|  | SOC_DOUBLE_R_TLV("Speaker Volume", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME, | 
|  | 0, 127, 0, out_tlv), | 
|  | SOC_DOUBLE_R("Speaker ZC Switch", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME, | 
|  | 7, 1, 0), | 
|  | SOC_SINGLE("Speaker AC Gain", WM8961_CLASS_D_CONTROL_2, 0, 7, 0), | 
|  |  | 
|  | SOC_SINGLE("DAC x128 OSR Switch", WM8961_ADC_DAC_CONTROL_2, 0, 1, 0), | 
|  | SOC_ENUM("DAC Deemphasis", dac_deemph), | 
|  | SOC_SINGLE("DAC Soft Mute Switch", WM8961_ADC_DAC_CONTROL_2, 3, 1, 0), | 
|  |  | 
|  | SOC_DOUBLE_R_TLV("Sidetone Volume", WM8961_DSP_SIDETONE_0, | 
|  | WM8961_DSP_SIDETONE_1, 4, 12, 0, sidetone_tlv), | 
|  |  | 
|  | SOC_SINGLE("ADC High Pass Filter Switch", WM8961_ADC_DAC_CONTROL_1, 0, 1, 0), | 
|  | SOC_ENUM("ADC High Pass Filter Mode", adc_hpf), | 
|  |  | 
|  | SOC_DOUBLE_R_TLV("Capture Volume", | 
|  | WM8961_LEFT_ADC_VOLUME, WM8961_RIGHT_ADC_VOLUME, | 
|  | 1, 119, 0, adc_tlv), | 
|  | SOC_DOUBLE_R_TLV("Capture Boost Volume", | 
|  | WM8961_ADCL_SIGNAL_PATH, WM8961_ADCR_SIGNAL_PATH, | 
|  | 4, 3, 0, boost_tlv), | 
|  | SOC_DOUBLE_R_TLV("Capture PGA Volume", | 
|  | WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME, | 
|  | 0, 62, 0, pga_tlv), | 
|  | SOC_DOUBLE_R("Capture PGA ZC Switch", | 
|  | WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME, | 
|  | 6, 1, 1), | 
|  | SOC_DOUBLE_R("Capture PGA Switch", | 
|  | WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME, | 
|  | 7, 1, 1), | 
|  | }; | 
|  |  | 
|  | static const char *sidetone_text[] = { | 
|  | "None", "Left", "Right" | 
|  | }; | 
|  |  | 
|  | static const struct soc_enum dacl_sidetone = | 
|  | SOC_ENUM_SINGLE(WM8961_DSP_SIDETONE_0, 2, 3, sidetone_text); | 
|  |  | 
|  | static const struct soc_enum dacr_sidetone = | 
|  | SOC_ENUM_SINGLE(WM8961_DSP_SIDETONE_1, 2, 3, sidetone_text); | 
|  |  | 
|  | static const struct snd_kcontrol_new dacl_mux = | 
|  | SOC_DAPM_ENUM("DACL Sidetone", dacl_sidetone); | 
|  |  | 
|  | static const struct snd_kcontrol_new dacr_mux = | 
|  | SOC_DAPM_ENUM("DACR Sidetone", dacr_sidetone); | 
|  |  | 
|  | static const struct snd_soc_dapm_widget wm8961_dapm_widgets[] = { | 
|  | SND_SOC_DAPM_INPUT("LINPUT"), | 
|  | SND_SOC_DAPM_INPUT("RINPUT"), | 
|  |  | 
|  | SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8961_CLOCKING2, 4, 0, NULL, 0), | 
|  |  | 
|  | SND_SOC_DAPM_PGA("Left Input", WM8961_PWR_MGMT_1, 5, 0, NULL, 0), | 
|  | SND_SOC_DAPM_PGA("Right Input", WM8961_PWR_MGMT_1, 4, 0, NULL, 0), | 
|  |  | 
|  | SND_SOC_DAPM_ADC("ADCL", "HiFi Capture", WM8961_PWR_MGMT_1, 3, 0), | 
|  | SND_SOC_DAPM_ADC("ADCR", "HiFi Capture", WM8961_PWR_MGMT_1, 2, 0), | 
|  |  | 
|  | SND_SOC_DAPM_MICBIAS("MICBIAS", WM8961_PWR_MGMT_1, 1, 0), | 
|  |  | 
|  | SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &dacl_mux), | 
|  | SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &dacr_mux), | 
|  |  | 
|  | SND_SOC_DAPM_DAC("DACL", "HiFi Playback", WM8961_PWR_MGMT_2, 8, 0), | 
|  | SND_SOC_DAPM_DAC("DACR", "HiFi Playback", WM8961_PWR_MGMT_2, 7, 0), | 
|  |  | 
|  | /* Handle as a mono path for DCS */ | 
|  | SND_SOC_DAPM_PGA_E("Headphone Output", SND_SOC_NOPM, | 
|  | 4, 0, NULL, 0, wm8961_hp_event, | 
|  | SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), | 
|  | SND_SOC_DAPM_PGA_E("Speaker Output", SND_SOC_NOPM, | 
|  | 4, 0, NULL, 0, wm8961_spk_event, | 
|  | SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), | 
|  |  | 
|  | SND_SOC_DAPM_OUTPUT("HP_L"), | 
|  | SND_SOC_DAPM_OUTPUT("HP_R"), | 
|  | SND_SOC_DAPM_OUTPUT("SPK_LN"), | 
|  | SND_SOC_DAPM_OUTPUT("SPK_LP"), | 
|  | SND_SOC_DAPM_OUTPUT("SPK_RN"), | 
|  | SND_SOC_DAPM_OUTPUT("SPK_RP"), | 
|  | }; | 
|  |  | 
|  |  | 
|  | static const struct snd_soc_dapm_route audio_paths[] = { | 
|  | { "DACL", NULL, "CLK_DSP" }, | 
|  | { "DACL", NULL, "DACL Sidetone" }, | 
|  | { "DACR", NULL, "CLK_DSP" }, | 
|  | { "DACR", NULL, "DACR Sidetone" }, | 
|  |  | 
|  | { "DACL Sidetone", "Left", "ADCL" }, | 
|  | { "DACL Sidetone", "Right", "ADCR" }, | 
|  |  | 
|  | { "DACR Sidetone", "Left", "ADCL" }, | 
|  | { "DACR Sidetone", "Right", "ADCR" }, | 
|  |  | 
|  | { "HP_L", NULL, "Headphone Output" }, | 
|  | { "HP_R", NULL, "Headphone Output" }, | 
|  | { "Headphone Output", NULL, "DACL" }, | 
|  | { "Headphone Output", NULL, "DACR" }, | 
|  |  | 
|  | { "SPK_LN", NULL, "Speaker Output" }, | 
|  | { "SPK_LP", NULL, "Speaker Output" }, | 
|  | { "SPK_RN", NULL, "Speaker Output" }, | 
|  | { "SPK_RP", NULL, "Speaker Output" }, | 
|  |  | 
|  | { "Speaker Output", NULL, "DACL" }, | 
|  | { "Speaker Output", NULL, "DACR" }, | 
|  |  | 
|  | { "ADCL", NULL, "Left Input" }, | 
|  | { "ADCL", NULL, "CLK_DSP" }, | 
|  | { "ADCR", NULL, "Right Input" }, | 
|  | { "ADCR", NULL, "CLK_DSP" }, | 
|  |  | 
|  | { "Left Input", NULL, "LINPUT" }, | 
|  | { "Right Input", NULL, "RINPUT" }, | 
|  |  | 
|  | }; | 
|  |  | 
|  | /* Values for CLK_SYS_RATE */ | 
|  | static struct { | 
|  | int ratio; | 
|  | u16 val; | 
|  | } wm8961_clk_sys_ratio[] = { | 
|  | {  64,  0 }, | 
|  | {  128, 1 }, | 
|  | {  192, 2 }, | 
|  | {  256, 3 }, | 
|  | {  384, 4 }, | 
|  | {  512, 5 }, | 
|  | {  768, 6 }, | 
|  | { 1024, 7 }, | 
|  | { 1408, 8 }, | 
|  | { 1536, 9 }, | 
|  | }; | 
|  |  | 
|  | /* Values for SAMPLE_RATE */ | 
|  | static struct { | 
|  | int rate; | 
|  | u16 val; | 
|  | } wm8961_srate[] = { | 
|  | { 48000, 0 }, | 
|  | { 44100, 0 }, | 
|  | { 32000, 1 }, | 
|  | { 22050, 2 }, | 
|  | { 24000, 2 }, | 
|  | { 16000, 3 }, | 
|  | { 11250, 4 }, | 
|  | { 12000, 4 }, | 
|  | {  8000, 5 }, | 
|  | }; | 
|  |  | 
|  | static int wm8961_hw_params(struct snd_pcm_substream *substream, | 
|  | struct snd_pcm_hw_params *params, | 
|  | struct snd_soc_dai *dai) | 
|  | { | 
|  | struct snd_soc_codec *codec = dai->codec; | 
|  | struct wm8961_priv *wm8961 = snd_soc_codec_get_drvdata(codec); | 
|  | int i, best, target, fs; | 
|  | u16 reg; | 
|  |  | 
|  | fs = params_rate(params); | 
|  |  | 
|  | if (!wm8961->sysclk) { | 
|  | dev_err(codec->dev, "MCLK has not been specified\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Find the closest sample rate for the filters */ | 
|  | best = 0; | 
|  | for (i = 0; i < ARRAY_SIZE(wm8961_srate); i++) { | 
|  | if (abs(wm8961_srate[i].rate - fs) < | 
|  | abs(wm8961_srate[best].rate - fs)) | 
|  | best = i; | 
|  | } | 
|  | reg = snd_soc_read(codec, WM8961_ADDITIONAL_CONTROL_3); | 
|  | reg &= ~WM8961_SAMPLE_RATE_MASK; | 
|  | reg |= wm8961_srate[best].val; | 
|  | snd_soc_write(codec, WM8961_ADDITIONAL_CONTROL_3, reg); | 
|  | dev_dbg(codec->dev, "Selected SRATE %dHz for %dHz\n", | 
|  | wm8961_srate[best].rate, fs); | 
|  |  | 
|  | /* Select a CLK_SYS/fs ratio equal to or higher than required */ | 
|  | target = wm8961->sysclk / fs; | 
|  |  | 
|  | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && target < 64) { | 
|  | dev_err(codec->dev, | 
|  | "SYSCLK must be at least 64*fs for DAC\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | if (substream->stream == SNDRV_PCM_STREAM_CAPTURE && target < 256) { | 
|  | dev_err(codec->dev, | 
|  | "SYSCLK must be at least 256*fs for ADC\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(wm8961_clk_sys_ratio); i++) { | 
|  | if (wm8961_clk_sys_ratio[i].ratio >= target) | 
|  | break; | 
|  | } | 
|  | if (i == ARRAY_SIZE(wm8961_clk_sys_ratio)) { | 
|  | dev_err(codec->dev, "Unable to generate CLK_SYS_RATE\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | dev_dbg(codec->dev, "Selected CLK_SYS_RATE of %d for %d/%d=%d\n", | 
|  | wm8961_clk_sys_ratio[i].ratio, wm8961->sysclk, fs, | 
|  | wm8961->sysclk / fs); | 
|  |  | 
|  | reg = snd_soc_read(codec, WM8961_CLOCKING_4); | 
|  | reg &= ~WM8961_CLK_SYS_RATE_MASK; | 
|  | reg |= wm8961_clk_sys_ratio[i].val << WM8961_CLK_SYS_RATE_SHIFT; | 
|  | snd_soc_write(codec, WM8961_CLOCKING_4, reg); | 
|  |  | 
|  | reg = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_0); | 
|  | reg &= ~WM8961_WL_MASK; | 
|  | switch (params_format(params)) { | 
|  | case SNDRV_PCM_FORMAT_S16_LE: | 
|  | break; | 
|  | case SNDRV_PCM_FORMAT_S20_3LE: | 
|  | reg |= 1 << WM8961_WL_SHIFT; | 
|  | break; | 
|  | case SNDRV_PCM_FORMAT_S24_LE: | 
|  | reg |= 2 << WM8961_WL_SHIFT; | 
|  | break; | 
|  | case SNDRV_PCM_FORMAT_S32_LE: | 
|  | reg |= 3 << WM8961_WL_SHIFT; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | snd_soc_write(codec, WM8961_AUDIO_INTERFACE_0, reg); | 
|  |  | 
|  | /* Sloping stop-band filter is recommended for <= 24kHz */ | 
|  | reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_2); | 
|  | if (fs <= 24000) | 
|  | reg |= WM8961_DACSLOPE; | 
|  | else | 
|  | reg &= ~WM8961_DACSLOPE; | 
|  | snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8961_set_sysclk(struct snd_soc_dai *dai, int clk_id, | 
|  | unsigned int freq, | 
|  | int dir) | 
|  | { | 
|  | struct snd_soc_codec *codec = dai->codec; | 
|  | struct wm8961_priv *wm8961 = snd_soc_codec_get_drvdata(codec); | 
|  | u16 reg = snd_soc_read(codec, WM8961_CLOCKING1); | 
|  |  | 
|  | if (freq > 33000000) { | 
|  | dev_err(codec->dev, "MCLK must be <33MHz\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (freq > 16500000) { | 
|  | dev_dbg(codec->dev, "Using MCLK/2 for %dHz MCLK\n", freq); | 
|  | reg |= WM8961_MCLKDIV; | 
|  | freq /= 2; | 
|  | } else { | 
|  | dev_dbg(codec->dev, "Using MCLK/1 for %dHz MCLK\n", freq); | 
|  | reg &= ~WM8961_MCLKDIV; | 
|  | } | 
|  |  | 
|  | snd_soc_write(codec, WM8961_CLOCKING1, reg); | 
|  |  | 
|  | wm8961->sysclk = freq; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8961_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) | 
|  | { | 
|  | struct snd_soc_codec *codec = dai->codec; | 
|  | u16 aif = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_0); | 
|  |  | 
|  | aif &= ~(WM8961_BCLKINV | WM8961_LRP | | 
|  | WM8961_MS | WM8961_FORMAT_MASK); | 
|  |  | 
|  | switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { | 
|  | case SND_SOC_DAIFMT_CBM_CFM: | 
|  | aif |= WM8961_MS; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_CBS_CFS: | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | 
|  | case SND_SOC_DAIFMT_RIGHT_J: | 
|  | break; | 
|  |  | 
|  | case SND_SOC_DAIFMT_LEFT_J: | 
|  | aif |= 1; | 
|  | break; | 
|  |  | 
|  | case SND_SOC_DAIFMT_I2S: | 
|  | aif |= 2; | 
|  | break; | 
|  |  | 
|  | case SND_SOC_DAIFMT_DSP_B: | 
|  | aif |= WM8961_LRP; | 
|  | case SND_SOC_DAIFMT_DSP_A: | 
|  | aif |= 3; | 
|  | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | 
|  | case SND_SOC_DAIFMT_NB_NF: | 
|  | case SND_SOC_DAIFMT_IB_NF: | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | 
|  | case SND_SOC_DAIFMT_NB_NF: | 
|  | break; | 
|  | case SND_SOC_DAIFMT_NB_IF: | 
|  | aif |= WM8961_LRP; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_IB_NF: | 
|  | aif |= WM8961_BCLKINV; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_IB_IF: | 
|  | aif |= WM8961_BCLKINV | WM8961_LRP; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return snd_soc_write(codec, WM8961_AUDIO_INTERFACE_0, aif); | 
|  | } | 
|  |  | 
|  | static int wm8961_set_tristate(struct snd_soc_dai *dai, int tristate) | 
|  | { | 
|  | struct snd_soc_codec *codec = dai->codec; | 
|  | u16 reg = snd_soc_read(codec, WM8961_ADDITIONAL_CONTROL_2); | 
|  |  | 
|  | if (tristate) | 
|  | reg |= WM8961_TRIS; | 
|  | else | 
|  | reg &= ~WM8961_TRIS; | 
|  |  | 
|  | return snd_soc_write(codec, WM8961_ADDITIONAL_CONTROL_2, reg); | 
|  | } | 
|  |  | 
|  | static int wm8961_digital_mute(struct snd_soc_dai *dai, int mute) | 
|  | { | 
|  | struct snd_soc_codec *codec = dai->codec; | 
|  | u16 reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_1); | 
|  |  | 
|  | if (mute) | 
|  | reg |= WM8961_DACMU; | 
|  | else | 
|  | reg &= ~WM8961_DACMU; | 
|  |  | 
|  | msleep(17); | 
|  |  | 
|  | return snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_1, reg); | 
|  | } | 
|  |  | 
|  | static int wm8961_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div) | 
|  | { | 
|  | struct snd_soc_codec *codec = dai->codec; | 
|  | u16 reg; | 
|  |  | 
|  | switch (div_id) { | 
|  | case WM8961_BCLK: | 
|  | reg = snd_soc_read(codec, WM8961_CLOCKING2); | 
|  | reg &= ~WM8961_BCLKDIV_MASK; | 
|  | reg |= div; | 
|  | snd_soc_write(codec, WM8961_CLOCKING2, reg); | 
|  | break; | 
|  |  | 
|  | case WM8961_LRCLK: | 
|  | reg = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_2); | 
|  | reg &= ~WM8961_LRCLK_RATE_MASK; | 
|  | reg |= div; | 
|  | snd_soc_write(codec, WM8961_AUDIO_INTERFACE_2, reg); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8961_set_bias_level(struct snd_soc_codec *codec, | 
|  | enum snd_soc_bias_level level) | 
|  | { | 
|  | u16 reg; | 
|  |  | 
|  | /* This is all slightly unusual since we have no bypass paths | 
|  | * and the output amplifier structure means we can just slam | 
|  | * the biases straight up rather than having to ramp them | 
|  | * slowly. | 
|  | */ | 
|  | switch (level) { | 
|  | case SND_SOC_BIAS_ON: | 
|  | break; | 
|  |  | 
|  | case SND_SOC_BIAS_PREPARE: | 
|  | if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY) { | 
|  | /* Enable bias generation */ | 
|  | reg = snd_soc_read(codec, WM8961_ANTI_POP); | 
|  | reg |= WM8961_BUFIOEN | WM8961_BUFDCOPEN; | 
|  | snd_soc_write(codec, WM8961_ANTI_POP, reg); | 
|  |  | 
|  | /* VMID=2*50k, VREF */ | 
|  | reg = snd_soc_read(codec, WM8961_PWR_MGMT_1); | 
|  | reg &= ~WM8961_VMIDSEL_MASK; | 
|  | reg |= (1 << WM8961_VMIDSEL_SHIFT) | WM8961_VREF; | 
|  | snd_soc_write(codec, WM8961_PWR_MGMT_1, reg); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case SND_SOC_BIAS_STANDBY: | 
|  | if (codec->dapm.bias_level == SND_SOC_BIAS_PREPARE) { | 
|  | /* VREF off */ | 
|  | reg = snd_soc_read(codec, WM8961_PWR_MGMT_1); | 
|  | reg &= ~WM8961_VREF; | 
|  | snd_soc_write(codec, WM8961_PWR_MGMT_1, reg); | 
|  |  | 
|  | /* Bias generation off */ | 
|  | reg = snd_soc_read(codec, WM8961_ANTI_POP); | 
|  | reg &= ~(WM8961_BUFIOEN | WM8961_BUFDCOPEN); | 
|  | snd_soc_write(codec, WM8961_ANTI_POP, reg); | 
|  |  | 
|  | /* VMID off */ | 
|  | reg = snd_soc_read(codec, WM8961_PWR_MGMT_1); | 
|  | reg &= ~WM8961_VMIDSEL_MASK; | 
|  | snd_soc_write(codec, WM8961_PWR_MGMT_1, reg); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case SND_SOC_BIAS_OFF: | 
|  | break; | 
|  | } | 
|  |  | 
|  | codec->dapm.bias_level = level; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | #define WM8961_RATES SNDRV_PCM_RATE_8000_48000 | 
|  |  | 
|  | #define WM8961_FORMATS \ | 
|  | (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ | 
|  | SNDRV_PCM_FMTBIT_S24_LE) | 
|  |  | 
|  | static struct snd_soc_dai_ops wm8961_dai_ops = { | 
|  | .hw_params = wm8961_hw_params, | 
|  | .set_sysclk = wm8961_set_sysclk, | 
|  | .set_fmt = wm8961_set_fmt, | 
|  | .digital_mute = wm8961_digital_mute, | 
|  | .set_tristate = wm8961_set_tristate, | 
|  | .set_clkdiv = wm8961_set_clkdiv, | 
|  | }; | 
|  |  | 
|  | static struct snd_soc_dai_driver wm8961_dai = { | 
|  | .name = "wm8961-hifi", | 
|  | .playback = { | 
|  | .stream_name = "HiFi Playback", | 
|  | .channels_min = 1, | 
|  | .channels_max = 2, | 
|  | .rates = WM8961_RATES, | 
|  | .formats = WM8961_FORMATS,}, | 
|  | .capture = { | 
|  | .stream_name = "HiFi Capture", | 
|  | .channels_min = 1, | 
|  | .channels_max = 2, | 
|  | .rates = WM8961_RATES, | 
|  | .formats = WM8961_FORMATS,}, | 
|  | .ops = &wm8961_dai_ops, | 
|  | }; | 
|  |  | 
|  | static int wm8961_probe(struct snd_soc_codec *codec) | 
|  | { | 
|  | struct snd_soc_dapm_context *dapm = &codec->dapm; | 
|  | int ret = 0; | 
|  | u16 reg; | 
|  |  | 
|  | ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C); | 
|  | if (ret != 0) { | 
|  | dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | reg = snd_soc_read(codec, WM8961_SOFTWARE_RESET); | 
|  | if (reg != 0x1801) { | 
|  | dev_err(codec->dev, "Device is not a WM8961: ID=0x%x\n", reg); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* This isn't volatile - readback doesn't correspond to write */ | 
|  | reg = codec->hw_read(codec, WM8961_RIGHT_INPUT_VOLUME); | 
|  | dev_info(codec->dev, "WM8961 family %d revision %c\n", | 
|  | (reg & WM8961_DEVICE_ID_MASK) >> WM8961_DEVICE_ID_SHIFT, | 
|  | ((reg & WM8961_CHIP_REV_MASK) >> WM8961_CHIP_REV_SHIFT) | 
|  | + 'A'); | 
|  |  | 
|  | ret = wm8961_reset(codec); | 
|  | if (ret < 0) { | 
|  | dev_err(codec->dev, "Failed to issue reset\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Enable class W */ | 
|  | reg = snd_soc_read(codec, WM8961_CHARGE_PUMP_B); | 
|  | reg |= WM8961_CP_DYN_PWR_MASK; | 
|  | snd_soc_write(codec, WM8961_CHARGE_PUMP_B, reg); | 
|  |  | 
|  | /* Latch volume update bits (right channel only, we always | 
|  | * write both out) and default ZC on. */ | 
|  | reg = snd_soc_read(codec, WM8961_ROUT1_VOLUME); | 
|  | snd_soc_write(codec, WM8961_ROUT1_VOLUME, | 
|  | reg | WM8961_LO1ZC | WM8961_OUT1VU); | 
|  | snd_soc_write(codec, WM8961_LOUT1_VOLUME, reg | WM8961_LO1ZC); | 
|  | reg = snd_soc_read(codec, WM8961_ROUT2_VOLUME); | 
|  | snd_soc_write(codec, WM8961_ROUT2_VOLUME, | 
|  | reg | WM8961_SPKRZC | WM8961_SPKVU); | 
|  | snd_soc_write(codec, WM8961_LOUT2_VOLUME, reg | WM8961_SPKLZC); | 
|  |  | 
|  | reg = snd_soc_read(codec, WM8961_RIGHT_ADC_VOLUME); | 
|  | snd_soc_write(codec, WM8961_RIGHT_ADC_VOLUME, reg | WM8961_ADCVU); | 
|  | reg = snd_soc_read(codec, WM8961_RIGHT_INPUT_VOLUME); | 
|  | snd_soc_write(codec, WM8961_RIGHT_INPUT_VOLUME, reg | WM8961_IPVU); | 
|  |  | 
|  | /* Use soft mute by default */ | 
|  | reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_2); | 
|  | reg |= WM8961_DACSMM; | 
|  | snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg); | 
|  |  | 
|  | /* Use automatic clocking mode by default; for now this is all | 
|  | * we support. | 
|  | */ | 
|  | reg = snd_soc_read(codec, WM8961_CLOCKING_3); | 
|  | reg &= ~WM8961_MANUAL_MODE; | 
|  | snd_soc_write(codec, WM8961_CLOCKING_3, reg); | 
|  |  | 
|  | wm8961_set_bias_level(codec, SND_SOC_BIAS_STANDBY); | 
|  |  | 
|  | snd_soc_add_controls(codec, wm8961_snd_controls, | 
|  | ARRAY_SIZE(wm8961_snd_controls)); | 
|  | snd_soc_dapm_new_controls(dapm, wm8961_dapm_widgets, | 
|  | ARRAY_SIZE(wm8961_dapm_widgets)); | 
|  | snd_soc_dapm_add_routes(dapm, audio_paths, ARRAY_SIZE(audio_paths)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8961_remove(struct snd_soc_codec *codec) | 
|  | { | 
|  | wm8961_set_bias_level(codec, SND_SOC_BIAS_OFF); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int wm8961_suspend(struct snd_soc_codec *codec, pm_message_t state) | 
|  | { | 
|  | wm8961_set_bias_level(codec, SND_SOC_BIAS_OFF); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8961_resume(struct snd_soc_codec *codec) | 
|  | { | 
|  | u16 *reg_cache = codec->reg_cache; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < codec->driver->reg_cache_size; i++) { | 
|  | if (reg_cache[i] == wm8961_reg_defaults[i]) | 
|  | continue; | 
|  |  | 
|  | if (i == WM8961_SOFTWARE_RESET) | 
|  | continue; | 
|  |  | 
|  | snd_soc_write(codec, i, reg_cache[i]); | 
|  | } | 
|  |  | 
|  | wm8961_set_bias_level(codec, SND_SOC_BIAS_STANDBY); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define wm8961_suspend NULL | 
|  | #define wm8961_resume NULL | 
|  | #endif | 
|  |  | 
|  | static struct snd_soc_codec_driver soc_codec_dev_wm8961 = { | 
|  | .probe =	wm8961_probe, | 
|  | .remove =	wm8961_remove, | 
|  | .suspend =	wm8961_suspend, | 
|  | .resume =	wm8961_resume, | 
|  | .set_bias_level = wm8961_set_bias_level, | 
|  | .reg_cache_size = ARRAY_SIZE(wm8961_reg_defaults), | 
|  | .reg_word_size = sizeof(u16), | 
|  | .reg_cache_default = wm8961_reg_defaults, | 
|  | .volatile_register = wm8961_volatile_register, | 
|  | }; | 
|  |  | 
|  | #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) | 
|  | static __devinit int wm8961_i2c_probe(struct i2c_client *i2c, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct wm8961_priv *wm8961; | 
|  | int ret; | 
|  |  | 
|  | wm8961 = kzalloc(sizeof(struct wm8961_priv), GFP_KERNEL); | 
|  | if (wm8961 == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | i2c_set_clientdata(i2c, wm8961); | 
|  |  | 
|  | ret = snd_soc_register_codec(&i2c->dev, | 
|  | &soc_codec_dev_wm8961, &wm8961_dai, 1); | 
|  | if (ret < 0) | 
|  | kfree(wm8961); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static __devexit int wm8961_i2c_remove(struct i2c_client *client) | 
|  | { | 
|  | snd_soc_unregister_codec(&client->dev); | 
|  | kfree(i2c_get_clientdata(client)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id wm8961_i2c_id[] = { | 
|  | { "wm8961", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, wm8961_i2c_id); | 
|  |  | 
|  | static struct i2c_driver wm8961_i2c_driver = { | 
|  | .driver = { | 
|  | .name = "wm8961-codec", | 
|  | .owner = THIS_MODULE, | 
|  | }, | 
|  | .probe =    wm8961_i2c_probe, | 
|  | .remove =   __devexit_p(wm8961_i2c_remove), | 
|  | .id_table = wm8961_i2c_id, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static int __init wm8961_modinit(void) | 
|  | { | 
|  | int ret = 0; | 
|  | #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) | 
|  | ret = i2c_add_driver(&wm8961_i2c_driver); | 
|  | if (ret != 0) { | 
|  | printk(KERN_ERR "Failed to register wm8961 I2C driver: %d\n", | 
|  | ret); | 
|  | } | 
|  | #endif | 
|  | return ret; | 
|  | } | 
|  | module_init(wm8961_modinit); | 
|  |  | 
|  | static void __exit wm8961_exit(void) | 
|  | { | 
|  | #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) | 
|  | i2c_del_driver(&wm8961_i2c_driver); | 
|  | #endif | 
|  | } | 
|  | module_exit(wm8961_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("ASoC WM8961 driver"); | 
|  | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | 
|  | MODULE_LICENSE("GPL"); |