|  | /* | 
|  | * IXP2400 MSF network device driver for the Radisys ENP2611 | 
|  | * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> | 
|  | * Dedicated to Marija Kulikova. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <asm/hardware/uengine.h> | 
|  | #include <asm/mach-types.h> | 
|  | #include <asm/io.h> | 
|  | #include "ixpdev.h" | 
|  | #include "caleb.h" | 
|  | #include "ixp2400-msf.h" | 
|  | #include "pm3386.h" | 
|  |  | 
|  | /*********************************************************************** | 
|  | * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC | 
|  | * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA | 
|  | * to the IXP2400. | 
|  | * | 
|  | *                +-------------+ | 
|  | * SFP GBIC #0 ---+             |       +---------+ | 
|  | *                |  PM3386 #0  +-------+         | | 
|  | * SFP GBIC #1 ---+             |       | "Caleb" |         +---------+ | 
|  | *                +-------------+       |         |         |         | | 
|  | *                                      | SPI-3   +---------+ IXP2400 | | 
|  | *                +-------------+       | bridge  |         |         | | 
|  | * SFP GBIC #2 ---+             |       | FPGA    |         +---------+ | 
|  | *                |  PM3386 #1  +-------+         | | 
|  | *                |             |       +---------+ | 
|  | *                +-------------+ | 
|  | *              ^                   ^                  ^ | 
|  | *              | 1.25Gbaud         | 104MHz           | 104MHz | 
|  | *              | SERDES ea.        | SPI-3 ea.        | SPI-3 | 
|  | * | 
|  | ***********************************************************************/ | 
|  | static struct ixp2400_msf_parameters enp2611_msf_parameters = | 
|  | { | 
|  | .rx_mode =		IXP2400_RX_MODE_UTOPIA_POS | | 
|  | IXP2400_RX_MODE_1x32 | | 
|  | IXP2400_RX_MODE_MPHY | | 
|  | IXP2400_RX_MODE_MPHY_32 | | 
|  | IXP2400_RX_MODE_MPHY_POLLED_STATUS | | 
|  | IXP2400_RX_MODE_MPHY_LEVEL3 | | 
|  | IXP2400_RX_MODE_RBUF_SIZE_64, | 
|  |  | 
|  | .rxclk01_multiplier =	IXP2400_PLL_MULTIPLIER_16, | 
|  |  | 
|  | .rx_poll_ports =	3, | 
|  |  | 
|  | .rx_channel_mode = { | 
|  | IXP2400_PORT_RX_MODE_MASTER | | 
|  | IXP2400_PORT_RX_MODE_POS_PHY | | 
|  | IXP2400_PORT_RX_MODE_POS_PHY_L3 | | 
|  | IXP2400_PORT_RX_MODE_ODD_PARITY | | 
|  | IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, | 
|  |  | 
|  | IXP2400_PORT_RX_MODE_MASTER | | 
|  | IXP2400_PORT_RX_MODE_POS_PHY | | 
|  | IXP2400_PORT_RX_MODE_POS_PHY_L3 | | 
|  | IXP2400_PORT_RX_MODE_ODD_PARITY | | 
|  | IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, | 
|  |  | 
|  | IXP2400_PORT_RX_MODE_MASTER | | 
|  | IXP2400_PORT_RX_MODE_POS_PHY | | 
|  | IXP2400_PORT_RX_MODE_POS_PHY_L3 | | 
|  | IXP2400_PORT_RX_MODE_ODD_PARITY | | 
|  | IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, | 
|  |  | 
|  | IXP2400_PORT_RX_MODE_MASTER | | 
|  | IXP2400_PORT_RX_MODE_POS_PHY | | 
|  | IXP2400_PORT_RX_MODE_POS_PHY_L3 | | 
|  | IXP2400_PORT_RX_MODE_ODD_PARITY | | 
|  | IXP2400_PORT_RX_MODE_2_CYCLE_DECODE | 
|  | }, | 
|  |  | 
|  | .tx_mode =		IXP2400_TX_MODE_UTOPIA_POS | | 
|  | IXP2400_TX_MODE_1x32 | | 
|  | IXP2400_TX_MODE_MPHY | | 
|  | IXP2400_TX_MODE_MPHY_32 | | 
|  | IXP2400_TX_MODE_MPHY_POLLED_STATUS | | 
|  | IXP2400_TX_MODE_MPHY_LEVEL3 | | 
|  | IXP2400_TX_MODE_TBUF_SIZE_64, | 
|  |  | 
|  | .txclk01_multiplier =	IXP2400_PLL_MULTIPLIER_16, | 
|  |  | 
|  | .tx_poll_ports =	3, | 
|  |  | 
|  | .tx_channel_mode = { | 
|  | IXP2400_PORT_TX_MODE_MASTER | | 
|  | IXP2400_PORT_TX_MODE_POS_PHY | | 
|  | IXP2400_PORT_TX_MODE_ODD_PARITY | | 
|  | IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, | 
|  |  | 
|  | IXP2400_PORT_TX_MODE_MASTER | | 
|  | IXP2400_PORT_TX_MODE_POS_PHY | | 
|  | IXP2400_PORT_TX_MODE_ODD_PARITY | | 
|  | IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, | 
|  |  | 
|  | IXP2400_PORT_TX_MODE_MASTER | | 
|  | IXP2400_PORT_TX_MODE_POS_PHY | | 
|  | IXP2400_PORT_TX_MODE_ODD_PARITY | | 
|  | IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, | 
|  |  | 
|  | IXP2400_PORT_TX_MODE_MASTER | | 
|  | IXP2400_PORT_TX_MODE_POS_PHY | | 
|  | IXP2400_PORT_TX_MODE_ODD_PARITY | | 
|  | IXP2400_PORT_TX_MODE_2_CYCLE_DECODE | 
|  | } | 
|  | }; | 
|  |  | 
|  | static struct net_device *nds[3]; | 
|  | static struct timer_list link_check_timer; | 
|  |  | 
|  | /* @@@ Poll the SFP moddef0 line too.  */ | 
|  | /* @@@ Try to use the pm3386 DOOL interrupt as well.  */ | 
|  | static void enp2611_check_link_status(unsigned long __dummy) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < 3; i++) { | 
|  | struct net_device *dev; | 
|  | int status; | 
|  |  | 
|  | dev = nds[i]; | 
|  | if (dev == NULL) | 
|  | continue; | 
|  |  | 
|  | status = pm3386_is_link_up(i); | 
|  | if (status && !netif_carrier_ok(dev)) { | 
|  | /* @@@ Should report autonegotiation status.  */ | 
|  | printk(KERN_INFO "%s: NIC Link is Up\n", dev->name); | 
|  |  | 
|  | pm3386_enable_tx(i); | 
|  | caleb_enable_tx(i); | 
|  | netif_carrier_on(dev); | 
|  | } else if (!status && netif_carrier_ok(dev)) { | 
|  | printk(KERN_INFO "%s: NIC Link is Down\n", dev->name); | 
|  |  | 
|  | netif_carrier_off(dev); | 
|  | caleb_disable_tx(i); | 
|  | pm3386_disable_tx(i); | 
|  | } | 
|  | } | 
|  |  | 
|  | link_check_timer.expires = jiffies + HZ / 10; | 
|  | add_timer(&link_check_timer); | 
|  | } | 
|  |  | 
|  | static void enp2611_set_port_admin_status(int port, int up) | 
|  | { | 
|  | if (up) { | 
|  | caleb_enable_rx(port); | 
|  |  | 
|  | pm3386_set_carrier(port, 1); | 
|  | pm3386_enable_rx(port); | 
|  | } else { | 
|  | caleb_disable_tx(port); | 
|  | pm3386_disable_tx(port); | 
|  | /* @@@ Flush out pending packets.  */ | 
|  | pm3386_set_carrier(port, 0); | 
|  |  | 
|  | pm3386_disable_rx(port); | 
|  | caleb_disable_rx(port); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int __init enp2611_init_module(void) | 
|  | { | 
|  | int ports; | 
|  | int i; | 
|  |  | 
|  | if (!machine_is_enp2611()) | 
|  | return -ENODEV; | 
|  |  | 
|  | caleb_reset(); | 
|  | pm3386_reset(); | 
|  |  | 
|  | ports = pm3386_port_count(); | 
|  | for (i = 0; i < ports; i++) { | 
|  | nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv)); | 
|  | if (nds[i] == NULL) { | 
|  | while (--i >= 0) | 
|  | free_netdev(nds[i]); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | pm3386_init_port(i); | 
|  | pm3386_get_mac(i, nds[i]->dev_addr); | 
|  | } | 
|  |  | 
|  | ixp2400_msf_init(&enp2611_msf_parameters); | 
|  |  | 
|  | if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) { | 
|  | for (i = 0; i < ports; i++) | 
|  | if (nds[i]) | 
|  | free_netdev(nds[i]); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | init_timer(&link_check_timer); | 
|  | link_check_timer.function = enp2611_check_link_status; | 
|  | link_check_timer.expires = jiffies; | 
|  | add_timer(&link_check_timer); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit enp2611_cleanup_module(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | del_timer_sync(&link_check_timer); | 
|  |  | 
|  | ixpdev_deinit(); | 
|  | for (i = 0; i < 3; i++) | 
|  | free_netdev(nds[i]); | 
|  | } | 
|  |  | 
|  | module_init(enp2611_init_module); | 
|  | module_exit(enp2611_cleanup_module); | 
|  | MODULE_LICENSE("GPL"); |