|  | /* | 
|  | * Copyright (C) 2003 Sistina Software Limited. | 
|  | * Copyright (C) 2004-2005 Red Hat, Inc. All rights reserved. | 
|  | * | 
|  | * This file is released under the GPL. | 
|  | */ | 
|  |  | 
|  | #include <linux/device-mapper.h> | 
|  |  | 
|  | #include "dm-path-selector.h" | 
|  | #include "dm-uevent.h" | 
|  |  | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/mempool.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/time.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <scsi/scsi_dh.h> | 
|  | #include <asm/atomic.h> | 
|  |  | 
|  | #define DM_MSG_PREFIX "multipath" | 
|  | #define MESG_STR(x) x, sizeof(x) | 
|  | #define DM_PG_INIT_DELAY_MSECS 2000 | 
|  | #define DM_PG_INIT_DELAY_DEFAULT ((unsigned) -1) | 
|  |  | 
|  | /* Path properties */ | 
|  | struct pgpath { | 
|  | struct list_head list; | 
|  |  | 
|  | struct priority_group *pg;	/* Owning PG */ | 
|  | unsigned is_active;		/* Path status */ | 
|  | unsigned fail_count;		/* Cumulative failure count */ | 
|  |  | 
|  | struct dm_path path; | 
|  | struct delayed_work activate_path; | 
|  | }; | 
|  |  | 
|  | #define path_to_pgpath(__pgp) container_of((__pgp), struct pgpath, path) | 
|  |  | 
|  | /* | 
|  | * Paths are grouped into Priority Groups and numbered from 1 upwards. | 
|  | * Each has a path selector which controls which path gets used. | 
|  | */ | 
|  | struct priority_group { | 
|  | struct list_head list; | 
|  |  | 
|  | struct multipath *m;		/* Owning multipath instance */ | 
|  | struct path_selector ps; | 
|  |  | 
|  | unsigned pg_num;		/* Reference number */ | 
|  | unsigned bypassed;		/* Temporarily bypass this PG? */ | 
|  |  | 
|  | unsigned nr_pgpaths;		/* Number of paths in PG */ | 
|  | struct list_head pgpaths; | 
|  | }; | 
|  |  | 
|  | /* Multipath context */ | 
|  | struct multipath { | 
|  | struct list_head list; | 
|  | struct dm_target *ti; | 
|  |  | 
|  | spinlock_t lock; | 
|  |  | 
|  | const char *hw_handler_name; | 
|  | char *hw_handler_params; | 
|  |  | 
|  | unsigned nr_priority_groups; | 
|  | struct list_head priority_groups; | 
|  |  | 
|  | wait_queue_head_t pg_init_wait;	/* Wait for pg_init completion */ | 
|  |  | 
|  | unsigned pg_init_required;	/* pg_init needs calling? */ | 
|  | unsigned pg_init_in_progress;	/* Only one pg_init allowed at once */ | 
|  | unsigned pg_init_delay_retry;	/* Delay pg_init retry? */ | 
|  |  | 
|  | unsigned nr_valid_paths;	/* Total number of usable paths */ | 
|  | struct pgpath *current_pgpath; | 
|  | struct priority_group *current_pg; | 
|  | struct priority_group *next_pg;	/* Switch to this PG if set */ | 
|  | unsigned repeat_count;		/* I/Os left before calling PS again */ | 
|  |  | 
|  | unsigned queue_io;		/* Must we queue all I/O? */ | 
|  | unsigned queue_if_no_path;	/* Queue I/O if last path fails? */ | 
|  | unsigned saved_queue_if_no_path;/* Saved state during suspension */ | 
|  | unsigned pg_init_retries;	/* Number of times to retry pg_init */ | 
|  | unsigned pg_init_count;		/* Number of times pg_init called */ | 
|  | unsigned pg_init_delay_msecs;	/* Number of msecs before pg_init retry */ | 
|  |  | 
|  | struct work_struct process_queued_ios; | 
|  | struct list_head queued_ios; | 
|  | unsigned queue_size; | 
|  |  | 
|  | struct work_struct trigger_event; | 
|  |  | 
|  | /* | 
|  | * We must use a mempool of dm_mpath_io structs so that we | 
|  | * can resubmit bios on error. | 
|  | */ | 
|  | mempool_t *mpio_pool; | 
|  |  | 
|  | struct mutex work_mutex; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Context information attached to each bio we process. | 
|  | */ | 
|  | struct dm_mpath_io { | 
|  | struct pgpath *pgpath; | 
|  | size_t nr_bytes; | 
|  | }; | 
|  |  | 
|  | typedef int (*action_fn) (struct pgpath *pgpath); | 
|  |  | 
|  | #define MIN_IOS 256	/* Mempool size */ | 
|  |  | 
|  | static struct kmem_cache *_mpio_cache; | 
|  |  | 
|  | static struct workqueue_struct *kmultipathd, *kmpath_handlerd; | 
|  | static void process_queued_ios(struct work_struct *work); | 
|  | static void trigger_event(struct work_struct *work); | 
|  | static void activate_path(struct work_struct *work); | 
|  |  | 
|  |  | 
|  | /*----------------------------------------------- | 
|  | * Allocation routines | 
|  | *-----------------------------------------------*/ | 
|  |  | 
|  | static struct pgpath *alloc_pgpath(void) | 
|  | { | 
|  | struct pgpath *pgpath = kzalloc(sizeof(*pgpath), GFP_KERNEL); | 
|  |  | 
|  | if (pgpath) { | 
|  | pgpath->is_active = 1; | 
|  | INIT_DELAYED_WORK(&pgpath->activate_path, activate_path); | 
|  | } | 
|  |  | 
|  | return pgpath; | 
|  | } | 
|  |  | 
|  | static void free_pgpath(struct pgpath *pgpath) | 
|  | { | 
|  | kfree(pgpath); | 
|  | } | 
|  |  | 
|  | static struct priority_group *alloc_priority_group(void) | 
|  | { | 
|  | struct priority_group *pg; | 
|  |  | 
|  | pg = kzalloc(sizeof(*pg), GFP_KERNEL); | 
|  |  | 
|  | if (pg) | 
|  | INIT_LIST_HEAD(&pg->pgpaths); | 
|  |  | 
|  | return pg; | 
|  | } | 
|  |  | 
|  | static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti) | 
|  | { | 
|  | struct pgpath *pgpath, *tmp; | 
|  | struct multipath *m = ti->private; | 
|  |  | 
|  | list_for_each_entry_safe(pgpath, tmp, pgpaths, list) { | 
|  | list_del(&pgpath->list); | 
|  | if (m->hw_handler_name) | 
|  | scsi_dh_detach(bdev_get_queue(pgpath->path.dev->bdev)); | 
|  | dm_put_device(ti, pgpath->path.dev); | 
|  | free_pgpath(pgpath); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void free_priority_group(struct priority_group *pg, | 
|  | struct dm_target *ti) | 
|  | { | 
|  | struct path_selector *ps = &pg->ps; | 
|  |  | 
|  | if (ps->type) { | 
|  | ps->type->destroy(ps); | 
|  | dm_put_path_selector(ps->type); | 
|  | } | 
|  |  | 
|  | free_pgpaths(&pg->pgpaths, ti); | 
|  | kfree(pg); | 
|  | } | 
|  |  | 
|  | static struct multipath *alloc_multipath(struct dm_target *ti) | 
|  | { | 
|  | struct multipath *m; | 
|  |  | 
|  | m = kzalloc(sizeof(*m), GFP_KERNEL); | 
|  | if (m) { | 
|  | INIT_LIST_HEAD(&m->priority_groups); | 
|  | INIT_LIST_HEAD(&m->queued_ios); | 
|  | spin_lock_init(&m->lock); | 
|  | m->queue_io = 1; | 
|  | m->pg_init_delay_msecs = DM_PG_INIT_DELAY_DEFAULT; | 
|  | INIT_WORK(&m->process_queued_ios, process_queued_ios); | 
|  | INIT_WORK(&m->trigger_event, trigger_event); | 
|  | init_waitqueue_head(&m->pg_init_wait); | 
|  | mutex_init(&m->work_mutex); | 
|  | m->mpio_pool = mempool_create_slab_pool(MIN_IOS, _mpio_cache); | 
|  | if (!m->mpio_pool) { | 
|  | kfree(m); | 
|  | return NULL; | 
|  | } | 
|  | m->ti = ti; | 
|  | ti->private = m; | 
|  | } | 
|  |  | 
|  | return m; | 
|  | } | 
|  |  | 
|  | static void free_multipath(struct multipath *m) | 
|  | { | 
|  | struct priority_group *pg, *tmp; | 
|  |  | 
|  | list_for_each_entry_safe(pg, tmp, &m->priority_groups, list) { | 
|  | list_del(&pg->list); | 
|  | free_priority_group(pg, m->ti); | 
|  | } | 
|  |  | 
|  | kfree(m->hw_handler_name); | 
|  | kfree(m->hw_handler_params); | 
|  | mempool_destroy(m->mpio_pool); | 
|  | kfree(m); | 
|  | } | 
|  |  | 
|  |  | 
|  | /*----------------------------------------------- | 
|  | * Path selection | 
|  | *-----------------------------------------------*/ | 
|  |  | 
|  | static void __pg_init_all_paths(struct multipath *m) | 
|  | { | 
|  | struct pgpath *pgpath; | 
|  | unsigned long pg_init_delay = 0; | 
|  |  | 
|  | m->pg_init_count++; | 
|  | m->pg_init_required = 0; | 
|  | if (m->pg_init_delay_retry) | 
|  | pg_init_delay = msecs_to_jiffies(m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT ? | 
|  | m->pg_init_delay_msecs : DM_PG_INIT_DELAY_MSECS); | 
|  | list_for_each_entry(pgpath, &m->current_pg->pgpaths, list) { | 
|  | /* Skip failed paths */ | 
|  | if (!pgpath->is_active) | 
|  | continue; | 
|  | if (queue_delayed_work(kmpath_handlerd, &pgpath->activate_path, | 
|  | pg_init_delay)) | 
|  | m->pg_init_in_progress++; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void __switch_pg(struct multipath *m, struct pgpath *pgpath) | 
|  | { | 
|  | m->current_pg = pgpath->pg; | 
|  |  | 
|  | /* Must we initialise the PG first, and queue I/O till it's ready? */ | 
|  | if (m->hw_handler_name) { | 
|  | m->pg_init_required = 1; | 
|  | m->queue_io = 1; | 
|  | } else { | 
|  | m->pg_init_required = 0; | 
|  | m->queue_io = 0; | 
|  | } | 
|  |  | 
|  | m->pg_init_count = 0; | 
|  | } | 
|  |  | 
|  | static int __choose_path_in_pg(struct multipath *m, struct priority_group *pg, | 
|  | size_t nr_bytes) | 
|  | { | 
|  | struct dm_path *path; | 
|  |  | 
|  | path = pg->ps.type->select_path(&pg->ps, &m->repeat_count, nr_bytes); | 
|  | if (!path) | 
|  | return -ENXIO; | 
|  |  | 
|  | m->current_pgpath = path_to_pgpath(path); | 
|  |  | 
|  | if (m->current_pg != pg) | 
|  | __switch_pg(m, m->current_pgpath); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __choose_pgpath(struct multipath *m, size_t nr_bytes) | 
|  | { | 
|  | struct priority_group *pg; | 
|  | unsigned bypassed = 1; | 
|  |  | 
|  | if (!m->nr_valid_paths) | 
|  | goto failed; | 
|  |  | 
|  | /* Were we instructed to switch PG? */ | 
|  | if (m->next_pg) { | 
|  | pg = m->next_pg; | 
|  | m->next_pg = NULL; | 
|  | if (!__choose_path_in_pg(m, pg, nr_bytes)) | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Don't change PG until it has no remaining paths */ | 
|  | if (m->current_pg && !__choose_path_in_pg(m, m->current_pg, nr_bytes)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Loop through priority groups until we find a valid path. | 
|  | * First time we skip PGs marked 'bypassed'. | 
|  | * Second time we only try the ones we skipped. | 
|  | */ | 
|  | do { | 
|  | list_for_each_entry(pg, &m->priority_groups, list) { | 
|  | if (pg->bypassed == bypassed) | 
|  | continue; | 
|  | if (!__choose_path_in_pg(m, pg, nr_bytes)) | 
|  | return; | 
|  | } | 
|  | } while (bypassed--); | 
|  |  | 
|  | failed: | 
|  | m->current_pgpath = NULL; | 
|  | m->current_pg = NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check whether bios must be queued in the device-mapper core rather | 
|  | * than here in the target. | 
|  | * | 
|  | * m->lock must be held on entry. | 
|  | * | 
|  | * If m->queue_if_no_path and m->saved_queue_if_no_path hold the | 
|  | * same value then we are not between multipath_presuspend() | 
|  | * and multipath_resume() calls and we have no need to check | 
|  | * for the DMF_NOFLUSH_SUSPENDING flag. | 
|  | */ | 
|  | static int __must_push_back(struct multipath *m) | 
|  | { | 
|  | return (m->queue_if_no_path != m->saved_queue_if_no_path && | 
|  | dm_noflush_suspending(m->ti)); | 
|  | } | 
|  |  | 
|  | static int map_io(struct multipath *m, struct request *clone, | 
|  | struct dm_mpath_io *mpio, unsigned was_queued) | 
|  | { | 
|  | int r = DM_MAPIO_REMAPPED; | 
|  | size_t nr_bytes = blk_rq_bytes(clone); | 
|  | unsigned long flags; | 
|  | struct pgpath *pgpath; | 
|  | struct block_device *bdev; | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  |  | 
|  | /* Do we need to select a new pgpath? */ | 
|  | if (!m->current_pgpath || | 
|  | (!m->queue_io && (m->repeat_count && --m->repeat_count == 0))) | 
|  | __choose_pgpath(m, nr_bytes); | 
|  |  | 
|  | pgpath = m->current_pgpath; | 
|  |  | 
|  | if (was_queued) | 
|  | m->queue_size--; | 
|  |  | 
|  | if ((pgpath && m->queue_io) || | 
|  | (!pgpath && m->queue_if_no_path)) { | 
|  | /* Queue for the daemon to resubmit */ | 
|  | list_add_tail(&clone->queuelist, &m->queued_ios); | 
|  | m->queue_size++; | 
|  | if ((m->pg_init_required && !m->pg_init_in_progress) || | 
|  | !m->queue_io) | 
|  | queue_work(kmultipathd, &m->process_queued_ios); | 
|  | pgpath = NULL; | 
|  | r = DM_MAPIO_SUBMITTED; | 
|  | } else if (pgpath) { | 
|  | bdev = pgpath->path.dev->bdev; | 
|  | clone->q = bdev_get_queue(bdev); | 
|  | clone->rq_disk = bdev->bd_disk; | 
|  | } else if (__must_push_back(m)) | 
|  | r = DM_MAPIO_REQUEUE; | 
|  | else | 
|  | r = -EIO;	/* Failed */ | 
|  |  | 
|  | mpio->pgpath = pgpath; | 
|  | mpio->nr_bytes = nr_bytes; | 
|  |  | 
|  | if (r == DM_MAPIO_REMAPPED && pgpath->pg->ps.type->start_io) | 
|  | pgpath->pg->ps.type->start_io(&pgpath->pg->ps, &pgpath->path, | 
|  | nr_bytes); | 
|  |  | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we run out of usable paths, should we queue I/O or error it? | 
|  | */ | 
|  | static int queue_if_no_path(struct multipath *m, unsigned queue_if_no_path, | 
|  | unsigned save_old_value) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  |  | 
|  | if (save_old_value) | 
|  | m->saved_queue_if_no_path = m->queue_if_no_path; | 
|  | else | 
|  | m->saved_queue_if_no_path = queue_if_no_path; | 
|  | m->queue_if_no_path = queue_if_no_path; | 
|  | if (!m->queue_if_no_path && m->queue_size) | 
|  | queue_work(kmultipathd, &m->process_queued_ios); | 
|  |  | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------- | 
|  | * The multipath daemon is responsible for resubmitting queued ios. | 
|  | *---------------------------------------------------------------*/ | 
|  |  | 
|  | static void dispatch_queued_ios(struct multipath *m) | 
|  | { | 
|  | int r; | 
|  | unsigned long flags; | 
|  | struct dm_mpath_io *mpio; | 
|  | union map_info *info; | 
|  | struct request *clone, *n; | 
|  | LIST_HEAD(cl); | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  | list_splice_init(&m->queued_ios, &cl); | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  |  | 
|  | list_for_each_entry_safe(clone, n, &cl, queuelist) { | 
|  | list_del_init(&clone->queuelist); | 
|  |  | 
|  | info = dm_get_rq_mapinfo(clone); | 
|  | mpio = info->ptr; | 
|  |  | 
|  | r = map_io(m, clone, mpio, 1); | 
|  | if (r < 0) { | 
|  | mempool_free(mpio, m->mpio_pool); | 
|  | dm_kill_unmapped_request(clone, r); | 
|  | } else if (r == DM_MAPIO_REMAPPED) | 
|  | dm_dispatch_request(clone); | 
|  | else if (r == DM_MAPIO_REQUEUE) { | 
|  | mempool_free(mpio, m->mpio_pool); | 
|  | dm_requeue_unmapped_request(clone); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void process_queued_ios(struct work_struct *work) | 
|  | { | 
|  | struct multipath *m = | 
|  | container_of(work, struct multipath, process_queued_ios); | 
|  | struct pgpath *pgpath = NULL; | 
|  | unsigned must_queue = 1; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  |  | 
|  | if (!m->queue_size) | 
|  | goto out; | 
|  |  | 
|  | if (!m->current_pgpath) | 
|  | __choose_pgpath(m, 0); | 
|  |  | 
|  | pgpath = m->current_pgpath; | 
|  |  | 
|  | if ((pgpath && !m->queue_io) || | 
|  | (!pgpath && !m->queue_if_no_path)) | 
|  | must_queue = 0; | 
|  |  | 
|  | if (m->pg_init_required && !m->pg_init_in_progress && pgpath) | 
|  | __pg_init_all_paths(m); | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  | if (!must_queue) | 
|  | dispatch_queued_ios(m); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * An event is triggered whenever a path is taken out of use. | 
|  | * Includes path failure and PG bypass. | 
|  | */ | 
|  | static void trigger_event(struct work_struct *work) | 
|  | { | 
|  | struct multipath *m = | 
|  | container_of(work, struct multipath, trigger_event); | 
|  |  | 
|  | dm_table_event(m->ti->table); | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------- | 
|  | * Constructor/argument parsing: | 
|  | * <#multipath feature args> [<arg>]* | 
|  | * <#hw_handler args> [hw_handler [<arg>]*] | 
|  | * <#priority groups> | 
|  | * <initial priority group> | 
|  | *     [<selector> <#selector args> [<arg>]* | 
|  | *      <#paths> <#per-path selector args> | 
|  | *         [<path> [<arg>]* ]+ ]+ | 
|  | *---------------------------------------------------------------*/ | 
|  | struct param { | 
|  | unsigned min; | 
|  | unsigned max; | 
|  | char *error; | 
|  | }; | 
|  |  | 
|  | static int read_param(struct param *param, char *str, unsigned *v, char **error) | 
|  | { | 
|  | if (!str || | 
|  | (sscanf(str, "%u", v) != 1) || | 
|  | (*v < param->min) || | 
|  | (*v > param->max)) { | 
|  | *error = param->error; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | struct arg_set { | 
|  | unsigned argc; | 
|  | char **argv; | 
|  | }; | 
|  |  | 
|  | static char *shift(struct arg_set *as) | 
|  | { | 
|  | char *r; | 
|  |  | 
|  | if (as->argc) { | 
|  | as->argc--; | 
|  | r = *as->argv; | 
|  | as->argv++; | 
|  | return r; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void consume(struct arg_set *as, unsigned n) | 
|  | { | 
|  | BUG_ON (as->argc < n); | 
|  | as->argc -= n; | 
|  | as->argv += n; | 
|  | } | 
|  |  | 
|  | static int parse_path_selector(struct arg_set *as, struct priority_group *pg, | 
|  | struct dm_target *ti) | 
|  | { | 
|  | int r; | 
|  | struct path_selector_type *pst; | 
|  | unsigned ps_argc; | 
|  |  | 
|  | static struct param _params[] = { | 
|  | {0, 1024, "invalid number of path selector args"}, | 
|  | }; | 
|  |  | 
|  | pst = dm_get_path_selector(shift(as)); | 
|  | if (!pst) { | 
|  | ti->error = "unknown path selector type"; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | r = read_param(_params, shift(as), &ps_argc, &ti->error); | 
|  | if (r) { | 
|  | dm_put_path_selector(pst); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (ps_argc > as->argc) { | 
|  | dm_put_path_selector(pst); | 
|  | ti->error = "not enough arguments for path selector"; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | r = pst->create(&pg->ps, ps_argc, as->argv); | 
|  | if (r) { | 
|  | dm_put_path_selector(pst); | 
|  | ti->error = "path selector constructor failed"; | 
|  | return r; | 
|  | } | 
|  |  | 
|  | pg->ps.type = pst; | 
|  | consume(as, ps_argc); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct pgpath *parse_path(struct arg_set *as, struct path_selector *ps, | 
|  | struct dm_target *ti) | 
|  | { | 
|  | int r; | 
|  | struct pgpath *p; | 
|  | struct multipath *m = ti->private; | 
|  |  | 
|  | /* we need at least a path arg */ | 
|  | if (as->argc < 1) { | 
|  | ti->error = "no device given"; | 
|  | return ERR_PTR(-EINVAL); | 
|  | } | 
|  |  | 
|  | p = alloc_pgpath(); | 
|  | if (!p) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | r = dm_get_device(ti, shift(as), dm_table_get_mode(ti->table), | 
|  | &p->path.dev); | 
|  | if (r) { | 
|  | ti->error = "error getting device"; | 
|  | goto bad; | 
|  | } | 
|  |  | 
|  | if (m->hw_handler_name) { | 
|  | struct request_queue *q = bdev_get_queue(p->path.dev->bdev); | 
|  |  | 
|  | r = scsi_dh_attach(q, m->hw_handler_name); | 
|  | if (r == -EBUSY) { | 
|  | /* | 
|  | * Already attached to different hw_handler, | 
|  | * try to reattach with correct one. | 
|  | */ | 
|  | scsi_dh_detach(q); | 
|  | r = scsi_dh_attach(q, m->hw_handler_name); | 
|  | } | 
|  |  | 
|  | if (r < 0) { | 
|  | ti->error = "error attaching hardware handler"; | 
|  | dm_put_device(ti, p->path.dev); | 
|  | goto bad; | 
|  | } | 
|  |  | 
|  | if (m->hw_handler_params) { | 
|  | r = scsi_dh_set_params(q, m->hw_handler_params); | 
|  | if (r < 0) { | 
|  | ti->error = "unable to set hardware " | 
|  | "handler parameters"; | 
|  | scsi_dh_detach(q); | 
|  | dm_put_device(ti, p->path.dev); | 
|  | goto bad; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | r = ps->type->add_path(ps, &p->path, as->argc, as->argv, &ti->error); | 
|  | if (r) { | 
|  | dm_put_device(ti, p->path.dev); | 
|  | goto bad; | 
|  | } | 
|  |  | 
|  | return p; | 
|  |  | 
|  | bad: | 
|  | free_pgpath(p); | 
|  | return ERR_PTR(r); | 
|  | } | 
|  |  | 
|  | static struct priority_group *parse_priority_group(struct arg_set *as, | 
|  | struct multipath *m) | 
|  | { | 
|  | static struct param _params[] = { | 
|  | {1, 1024, "invalid number of paths"}, | 
|  | {0, 1024, "invalid number of selector args"} | 
|  | }; | 
|  |  | 
|  | int r; | 
|  | unsigned i, nr_selector_args, nr_params; | 
|  | struct priority_group *pg; | 
|  | struct dm_target *ti = m->ti; | 
|  |  | 
|  | if (as->argc < 2) { | 
|  | as->argc = 0; | 
|  | ti->error = "not enough priority group arguments"; | 
|  | return ERR_PTR(-EINVAL); | 
|  | } | 
|  |  | 
|  | pg = alloc_priority_group(); | 
|  | if (!pg) { | 
|  | ti->error = "couldn't allocate priority group"; | 
|  | return ERR_PTR(-ENOMEM); | 
|  | } | 
|  | pg->m = m; | 
|  |  | 
|  | r = parse_path_selector(as, pg, ti); | 
|  | if (r) | 
|  | goto bad; | 
|  |  | 
|  | /* | 
|  | * read the paths | 
|  | */ | 
|  | r = read_param(_params, shift(as), &pg->nr_pgpaths, &ti->error); | 
|  | if (r) | 
|  | goto bad; | 
|  |  | 
|  | r = read_param(_params + 1, shift(as), &nr_selector_args, &ti->error); | 
|  | if (r) | 
|  | goto bad; | 
|  |  | 
|  | nr_params = 1 + nr_selector_args; | 
|  | for (i = 0; i < pg->nr_pgpaths; i++) { | 
|  | struct pgpath *pgpath; | 
|  | struct arg_set path_args; | 
|  |  | 
|  | if (as->argc < nr_params) { | 
|  | ti->error = "not enough path parameters"; | 
|  | r = -EINVAL; | 
|  | goto bad; | 
|  | } | 
|  |  | 
|  | path_args.argc = nr_params; | 
|  | path_args.argv = as->argv; | 
|  |  | 
|  | pgpath = parse_path(&path_args, &pg->ps, ti); | 
|  | if (IS_ERR(pgpath)) { | 
|  | r = PTR_ERR(pgpath); | 
|  | goto bad; | 
|  | } | 
|  |  | 
|  | pgpath->pg = pg; | 
|  | list_add_tail(&pgpath->list, &pg->pgpaths); | 
|  | consume(as, nr_params); | 
|  | } | 
|  |  | 
|  | return pg; | 
|  |  | 
|  | bad: | 
|  | free_priority_group(pg, ti); | 
|  | return ERR_PTR(r); | 
|  | } | 
|  |  | 
|  | static int parse_hw_handler(struct arg_set *as, struct multipath *m) | 
|  | { | 
|  | unsigned hw_argc; | 
|  | int ret; | 
|  | struct dm_target *ti = m->ti; | 
|  |  | 
|  | static struct param _params[] = { | 
|  | {0, 1024, "invalid number of hardware handler args"}, | 
|  | }; | 
|  |  | 
|  | if (read_param(_params, shift(as), &hw_argc, &ti->error)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!hw_argc) | 
|  | return 0; | 
|  |  | 
|  | if (hw_argc > as->argc) { | 
|  | ti->error = "not enough arguments for hardware handler"; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | m->hw_handler_name = kstrdup(shift(as), GFP_KERNEL); | 
|  | request_module("scsi_dh_%s", m->hw_handler_name); | 
|  | if (scsi_dh_handler_exist(m->hw_handler_name) == 0) { | 
|  | ti->error = "unknown hardware handler type"; | 
|  | ret = -EINVAL; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | if (hw_argc > 1) { | 
|  | char *p; | 
|  | int i, j, len = 4; | 
|  |  | 
|  | for (i = 0; i <= hw_argc - 2; i++) | 
|  | len += strlen(as->argv[i]) + 1; | 
|  | p = m->hw_handler_params = kzalloc(len, GFP_KERNEL); | 
|  | if (!p) { | 
|  | ti->error = "memory allocation failed"; | 
|  | ret = -ENOMEM; | 
|  | goto fail; | 
|  | } | 
|  | j = sprintf(p, "%d", hw_argc - 1); | 
|  | for (i = 0, p+=j+1; i <= hw_argc - 2; i++, p+=j+1) | 
|  | j = sprintf(p, "%s", as->argv[i]); | 
|  | } | 
|  | consume(as, hw_argc - 1); | 
|  |  | 
|  | return 0; | 
|  | fail: | 
|  | kfree(m->hw_handler_name); | 
|  | m->hw_handler_name = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int parse_features(struct arg_set *as, struct multipath *m) | 
|  | { | 
|  | int r; | 
|  | unsigned argc; | 
|  | struct dm_target *ti = m->ti; | 
|  | const char *param_name; | 
|  |  | 
|  | static struct param _params[] = { | 
|  | {0, 5, "invalid number of feature args"}, | 
|  | {1, 50, "pg_init_retries must be between 1 and 50"}, | 
|  | {0, 60000, "pg_init_delay_msecs must be between 0 and 60000"}, | 
|  | }; | 
|  |  | 
|  | r = read_param(_params, shift(as), &argc, &ti->error); | 
|  | if (r) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!argc) | 
|  | return 0; | 
|  |  | 
|  | do { | 
|  | param_name = shift(as); | 
|  | argc--; | 
|  |  | 
|  | if (!strnicmp(param_name, MESG_STR("queue_if_no_path"))) { | 
|  | r = queue_if_no_path(m, 1, 0); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (!strnicmp(param_name, MESG_STR("pg_init_retries")) && | 
|  | (argc >= 1)) { | 
|  | r = read_param(_params + 1, shift(as), | 
|  | &m->pg_init_retries, &ti->error); | 
|  | argc--; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (!strnicmp(param_name, MESG_STR("pg_init_delay_msecs")) && | 
|  | (argc >= 1)) { | 
|  | r = read_param(_params + 2, shift(as), | 
|  | &m->pg_init_delay_msecs, &ti->error); | 
|  | argc--; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | ti->error = "Unrecognised multipath feature request"; | 
|  | r = -EINVAL; | 
|  | } while (argc && !r); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static int multipath_ctr(struct dm_target *ti, unsigned int argc, | 
|  | char **argv) | 
|  | { | 
|  | /* target parameters */ | 
|  | static struct param _params[] = { | 
|  | {0, 1024, "invalid number of priority groups"}, | 
|  | {0, 1024, "invalid initial priority group number"}, | 
|  | }; | 
|  |  | 
|  | int r; | 
|  | struct multipath *m; | 
|  | struct arg_set as; | 
|  | unsigned pg_count = 0; | 
|  | unsigned next_pg_num; | 
|  |  | 
|  | as.argc = argc; | 
|  | as.argv = argv; | 
|  |  | 
|  | m = alloc_multipath(ti); | 
|  | if (!m) { | 
|  | ti->error = "can't allocate multipath"; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | r = parse_features(&as, m); | 
|  | if (r) | 
|  | goto bad; | 
|  |  | 
|  | r = parse_hw_handler(&as, m); | 
|  | if (r) | 
|  | goto bad; | 
|  |  | 
|  | r = read_param(_params, shift(&as), &m->nr_priority_groups, &ti->error); | 
|  | if (r) | 
|  | goto bad; | 
|  |  | 
|  | r = read_param(_params + 1, shift(&as), &next_pg_num, &ti->error); | 
|  | if (r) | 
|  | goto bad; | 
|  |  | 
|  | if ((!m->nr_priority_groups && next_pg_num) || | 
|  | (m->nr_priority_groups && !next_pg_num)) { | 
|  | ti->error = "invalid initial priority group"; | 
|  | r = -EINVAL; | 
|  | goto bad; | 
|  | } | 
|  |  | 
|  | /* parse the priority groups */ | 
|  | while (as.argc) { | 
|  | struct priority_group *pg; | 
|  |  | 
|  | pg = parse_priority_group(&as, m); | 
|  | if (IS_ERR(pg)) { | 
|  | r = PTR_ERR(pg); | 
|  | goto bad; | 
|  | } | 
|  |  | 
|  | m->nr_valid_paths += pg->nr_pgpaths; | 
|  | list_add_tail(&pg->list, &m->priority_groups); | 
|  | pg_count++; | 
|  | pg->pg_num = pg_count; | 
|  | if (!--next_pg_num) | 
|  | m->next_pg = pg; | 
|  | } | 
|  |  | 
|  | if (pg_count != m->nr_priority_groups) { | 
|  | ti->error = "priority group count mismatch"; | 
|  | r = -EINVAL; | 
|  | goto bad; | 
|  | } | 
|  |  | 
|  | ti->num_flush_requests = 1; | 
|  | ti->num_discard_requests = 1; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | bad: | 
|  | free_multipath(m); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static void multipath_wait_for_pg_init_completion(struct multipath *m) | 
|  | { | 
|  | DECLARE_WAITQUEUE(wait, current); | 
|  | unsigned long flags; | 
|  |  | 
|  | add_wait_queue(&m->pg_init_wait, &wait); | 
|  |  | 
|  | while (1) { | 
|  | set_current_state(TASK_UNINTERRUPTIBLE); | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  | if (!m->pg_init_in_progress) { | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  | break; | 
|  | } | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  |  | 
|  | io_schedule(); | 
|  | } | 
|  | set_current_state(TASK_RUNNING); | 
|  |  | 
|  | remove_wait_queue(&m->pg_init_wait, &wait); | 
|  | } | 
|  |  | 
|  | static void flush_multipath_work(struct multipath *m) | 
|  | { | 
|  | flush_workqueue(kmpath_handlerd); | 
|  | multipath_wait_for_pg_init_completion(m); | 
|  | flush_workqueue(kmultipathd); | 
|  | flush_work_sync(&m->trigger_event); | 
|  | } | 
|  |  | 
|  | static void multipath_dtr(struct dm_target *ti) | 
|  | { | 
|  | struct multipath *m = ti->private; | 
|  |  | 
|  | flush_multipath_work(m); | 
|  | free_multipath(m); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Map cloned requests | 
|  | */ | 
|  | static int multipath_map(struct dm_target *ti, struct request *clone, | 
|  | union map_info *map_context) | 
|  | { | 
|  | int r; | 
|  | struct dm_mpath_io *mpio; | 
|  | struct multipath *m = (struct multipath *) ti->private; | 
|  |  | 
|  | mpio = mempool_alloc(m->mpio_pool, GFP_ATOMIC); | 
|  | if (!mpio) | 
|  | /* ENOMEM, requeue */ | 
|  | return DM_MAPIO_REQUEUE; | 
|  | memset(mpio, 0, sizeof(*mpio)); | 
|  |  | 
|  | map_context->ptr = mpio; | 
|  | clone->cmd_flags |= REQ_FAILFAST_TRANSPORT; | 
|  | r = map_io(m, clone, mpio, 0); | 
|  | if (r < 0 || r == DM_MAPIO_REQUEUE) | 
|  | mempool_free(mpio, m->mpio_pool); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Take a path out of use. | 
|  | */ | 
|  | static int fail_path(struct pgpath *pgpath) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct multipath *m = pgpath->pg->m; | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  |  | 
|  | if (!pgpath->is_active) | 
|  | goto out; | 
|  |  | 
|  | DMWARN("Failing path %s.", pgpath->path.dev->name); | 
|  |  | 
|  | pgpath->pg->ps.type->fail_path(&pgpath->pg->ps, &pgpath->path); | 
|  | pgpath->is_active = 0; | 
|  | pgpath->fail_count++; | 
|  |  | 
|  | m->nr_valid_paths--; | 
|  |  | 
|  | if (pgpath == m->current_pgpath) | 
|  | m->current_pgpath = NULL; | 
|  |  | 
|  | dm_path_uevent(DM_UEVENT_PATH_FAILED, m->ti, | 
|  | pgpath->path.dev->name, m->nr_valid_paths); | 
|  |  | 
|  | schedule_work(&m->trigger_event); | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reinstate a previously-failed path | 
|  | */ | 
|  | static int reinstate_path(struct pgpath *pgpath) | 
|  | { | 
|  | int r = 0; | 
|  | unsigned long flags; | 
|  | struct multipath *m = pgpath->pg->m; | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  |  | 
|  | if (pgpath->is_active) | 
|  | goto out; | 
|  |  | 
|  | if (!pgpath->pg->ps.type->reinstate_path) { | 
|  | DMWARN("Reinstate path not supported by path selector %s", | 
|  | pgpath->pg->ps.type->name); | 
|  | r = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | r = pgpath->pg->ps.type->reinstate_path(&pgpath->pg->ps, &pgpath->path); | 
|  | if (r) | 
|  | goto out; | 
|  |  | 
|  | pgpath->is_active = 1; | 
|  |  | 
|  | if (!m->nr_valid_paths++ && m->queue_size) { | 
|  | m->current_pgpath = NULL; | 
|  | queue_work(kmultipathd, &m->process_queued_ios); | 
|  | } else if (m->hw_handler_name && (m->current_pg == pgpath->pg)) { | 
|  | if (queue_work(kmpath_handlerd, &pgpath->activate_path.work)) | 
|  | m->pg_init_in_progress++; | 
|  | } | 
|  |  | 
|  | dm_path_uevent(DM_UEVENT_PATH_REINSTATED, m->ti, | 
|  | pgpath->path.dev->name, m->nr_valid_paths); | 
|  |  | 
|  | schedule_work(&m->trigger_event); | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Fail or reinstate all paths that match the provided struct dm_dev. | 
|  | */ | 
|  | static int action_dev(struct multipath *m, struct dm_dev *dev, | 
|  | action_fn action) | 
|  | { | 
|  | int r = -EINVAL; | 
|  | struct pgpath *pgpath; | 
|  | struct priority_group *pg; | 
|  |  | 
|  | list_for_each_entry(pg, &m->priority_groups, list) { | 
|  | list_for_each_entry(pgpath, &pg->pgpaths, list) { | 
|  | if (pgpath->path.dev == dev) | 
|  | r = action(pgpath); | 
|  | } | 
|  | } | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Temporarily try to avoid having to use the specified PG | 
|  | */ | 
|  | static void bypass_pg(struct multipath *m, struct priority_group *pg, | 
|  | int bypassed) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  |  | 
|  | pg->bypassed = bypassed; | 
|  | m->current_pgpath = NULL; | 
|  | m->current_pg = NULL; | 
|  |  | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  |  | 
|  | schedule_work(&m->trigger_event); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Switch to using the specified PG from the next I/O that gets mapped | 
|  | */ | 
|  | static int switch_pg_num(struct multipath *m, const char *pgstr) | 
|  | { | 
|  | struct priority_group *pg; | 
|  | unsigned pgnum; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!pgstr || (sscanf(pgstr, "%u", &pgnum) != 1) || !pgnum || | 
|  | (pgnum > m->nr_priority_groups)) { | 
|  | DMWARN("invalid PG number supplied to switch_pg_num"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  | list_for_each_entry(pg, &m->priority_groups, list) { | 
|  | pg->bypassed = 0; | 
|  | if (--pgnum) | 
|  | continue; | 
|  |  | 
|  | m->current_pgpath = NULL; | 
|  | m->current_pg = NULL; | 
|  | m->next_pg = pg; | 
|  | } | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  |  | 
|  | schedule_work(&m->trigger_event); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Set/clear bypassed status of a PG. | 
|  | * PGs are numbered upwards from 1 in the order they were declared. | 
|  | */ | 
|  | static int bypass_pg_num(struct multipath *m, const char *pgstr, int bypassed) | 
|  | { | 
|  | struct priority_group *pg; | 
|  | unsigned pgnum; | 
|  |  | 
|  | if (!pgstr || (sscanf(pgstr, "%u", &pgnum) != 1) || !pgnum || | 
|  | (pgnum > m->nr_priority_groups)) { | 
|  | DMWARN("invalid PG number supplied to bypass_pg"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | list_for_each_entry(pg, &m->priority_groups, list) { | 
|  | if (!--pgnum) | 
|  | break; | 
|  | } | 
|  |  | 
|  | bypass_pg(m, pg, bypassed); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Should we retry pg_init immediately? | 
|  | */ | 
|  | static int pg_init_limit_reached(struct multipath *m, struct pgpath *pgpath) | 
|  | { | 
|  | unsigned long flags; | 
|  | int limit_reached = 0; | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  |  | 
|  | if (m->pg_init_count <= m->pg_init_retries) | 
|  | m->pg_init_required = 1; | 
|  | else | 
|  | limit_reached = 1; | 
|  |  | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  |  | 
|  | return limit_reached; | 
|  | } | 
|  |  | 
|  | static void pg_init_done(void *data, int errors) | 
|  | { | 
|  | struct pgpath *pgpath = data; | 
|  | struct priority_group *pg = pgpath->pg; | 
|  | struct multipath *m = pg->m; | 
|  | unsigned long flags; | 
|  | unsigned delay_retry = 0; | 
|  |  | 
|  | /* device or driver problems */ | 
|  | switch (errors) { | 
|  | case SCSI_DH_OK: | 
|  | break; | 
|  | case SCSI_DH_NOSYS: | 
|  | if (!m->hw_handler_name) { | 
|  | errors = 0; | 
|  | break; | 
|  | } | 
|  | DMERR("Could not failover the device: Handler scsi_dh_%s " | 
|  | "Error %d.", m->hw_handler_name, errors); | 
|  | /* | 
|  | * Fail path for now, so we do not ping pong | 
|  | */ | 
|  | fail_path(pgpath); | 
|  | break; | 
|  | case SCSI_DH_DEV_TEMP_BUSY: | 
|  | /* | 
|  | * Probably doing something like FW upgrade on the | 
|  | * controller so try the other pg. | 
|  | */ | 
|  | bypass_pg(m, pg, 1); | 
|  | break; | 
|  | case SCSI_DH_RETRY: | 
|  | /* Wait before retrying. */ | 
|  | delay_retry = 1; | 
|  | case SCSI_DH_IMM_RETRY: | 
|  | case SCSI_DH_RES_TEMP_UNAVAIL: | 
|  | if (pg_init_limit_reached(m, pgpath)) | 
|  | fail_path(pgpath); | 
|  | errors = 0; | 
|  | break; | 
|  | default: | 
|  | /* | 
|  | * We probably do not want to fail the path for a device | 
|  | * error, but this is what the old dm did. In future | 
|  | * patches we can do more advanced handling. | 
|  | */ | 
|  | fail_path(pgpath); | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  | if (errors) { | 
|  | if (pgpath == m->current_pgpath) { | 
|  | DMERR("Could not failover device. Error %d.", errors); | 
|  | m->current_pgpath = NULL; | 
|  | m->current_pg = NULL; | 
|  | } | 
|  | } else if (!m->pg_init_required) | 
|  | pg->bypassed = 0; | 
|  |  | 
|  | if (--m->pg_init_in_progress) | 
|  | /* Activations of other paths are still on going */ | 
|  | goto out; | 
|  |  | 
|  | if (!m->pg_init_required) | 
|  | m->queue_io = 0; | 
|  |  | 
|  | m->pg_init_delay_retry = delay_retry; | 
|  | queue_work(kmultipathd, &m->process_queued_ios); | 
|  |  | 
|  | /* | 
|  | * Wake up any thread waiting to suspend. | 
|  | */ | 
|  | wake_up(&m->pg_init_wait); | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  | } | 
|  |  | 
|  | static void activate_path(struct work_struct *work) | 
|  | { | 
|  | struct pgpath *pgpath = | 
|  | container_of(work, struct pgpath, activate_path.work); | 
|  |  | 
|  | scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev), | 
|  | pg_init_done, pgpath); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * end_io handling | 
|  | */ | 
|  | static int do_end_io(struct multipath *m, struct request *clone, | 
|  | int error, struct dm_mpath_io *mpio) | 
|  | { | 
|  | /* | 
|  | * We don't queue any clone request inside the multipath target | 
|  | * during end I/O handling, since those clone requests don't have | 
|  | * bio clones.  If we queue them inside the multipath target, | 
|  | * we need to make bio clones, that requires memory allocation. | 
|  | * (See drivers/md/dm.c:end_clone_bio() about why the clone requests | 
|  | *  don't have bio clones.) | 
|  | * Instead of queueing the clone request here, we queue the original | 
|  | * request into dm core, which will remake a clone request and | 
|  | * clone bios for it and resubmit it later. | 
|  | */ | 
|  | int r = DM_ENDIO_REQUEUE; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!error && !clone->errors) | 
|  | return 0;	/* I/O complete */ | 
|  |  | 
|  | if (error == -EOPNOTSUPP || error == -EREMOTEIO || error == -EILSEQ) | 
|  | return error; | 
|  |  | 
|  | if (mpio->pgpath) | 
|  | fail_path(mpio->pgpath); | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  | if (!m->nr_valid_paths) { | 
|  | if (!m->queue_if_no_path) { | 
|  | if (!__must_push_back(m)) | 
|  | r = -EIO; | 
|  | } else { | 
|  | if (error == -EBADE) | 
|  | r = error; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static int multipath_end_io(struct dm_target *ti, struct request *clone, | 
|  | int error, union map_info *map_context) | 
|  | { | 
|  | struct multipath *m = ti->private; | 
|  | struct dm_mpath_io *mpio = map_context->ptr; | 
|  | struct pgpath *pgpath = mpio->pgpath; | 
|  | struct path_selector *ps; | 
|  | int r; | 
|  |  | 
|  | r  = do_end_io(m, clone, error, mpio); | 
|  | if (pgpath) { | 
|  | ps = &pgpath->pg->ps; | 
|  | if (ps->type->end_io) | 
|  | ps->type->end_io(ps, &pgpath->path, mpio->nr_bytes); | 
|  | } | 
|  | mempool_free(mpio, m->mpio_pool); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Suspend can't complete until all the I/O is processed so if | 
|  | * the last path fails we must error any remaining I/O. | 
|  | * Note that if the freeze_bdev fails while suspending, the | 
|  | * queue_if_no_path state is lost - userspace should reset it. | 
|  | */ | 
|  | static void multipath_presuspend(struct dm_target *ti) | 
|  | { | 
|  | struct multipath *m = (struct multipath *) ti->private; | 
|  |  | 
|  | queue_if_no_path(m, 0, 1); | 
|  | } | 
|  |  | 
|  | static void multipath_postsuspend(struct dm_target *ti) | 
|  | { | 
|  | struct multipath *m = ti->private; | 
|  |  | 
|  | mutex_lock(&m->work_mutex); | 
|  | flush_multipath_work(m); | 
|  | mutex_unlock(&m->work_mutex); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Restore the queue_if_no_path setting. | 
|  | */ | 
|  | static void multipath_resume(struct dm_target *ti) | 
|  | { | 
|  | struct multipath *m = (struct multipath *) ti->private; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  | m->queue_if_no_path = m->saved_queue_if_no_path; | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Info output has the following format: | 
|  | * num_multipath_feature_args [multipath_feature_args]* | 
|  | * num_handler_status_args [handler_status_args]* | 
|  | * num_groups init_group_number | 
|  | *            [A|D|E num_ps_status_args [ps_status_args]* | 
|  | *             num_paths num_selector_args | 
|  | *             [path_dev A|F fail_count [selector_args]* ]+ ]+ | 
|  | * | 
|  | * Table output has the following format (identical to the constructor string): | 
|  | * num_feature_args [features_args]* | 
|  | * num_handler_args hw_handler [hw_handler_args]* | 
|  | * num_groups init_group_number | 
|  | *     [priority selector-name num_ps_args [ps_args]* | 
|  | *      num_paths num_selector_args [path_dev [selector_args]* ]+ ]+ | 
|  | */ | 
|  | static int multipath_status(struct dm_target *ti, status_type_t type, | 
|  | char *result, unsigned int maxlen) | 
|  | { | 
|  | int sz = 0; | 
|  | unsigned long flags; | 
|  | struct multipath *m = (struct multipath *) ti->private; | 
|  | struct priority_group *pg; | 
|  | struct pgpath *p; | 
|  | unsigned pg_num; | 
|  | char state; | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  |  | 
|  | /* Features */ | 
|  | if (type == STATUSTYPE_INFO) | 
|  | DMEMIT("2 %u %u ", m->queue_size, m->pg_init_count); | 
|  | else { | 
|  | DMEMIT("%u ", m->queue_if_no_path + | 
|  | (m->pg_init_retries > 0) * 2 + | 
|  | (m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT) * 2); | 
|  | if (m->queue_if_no_path) | 
|  | DMEMIT("queue_if_no_path "); | 
|  | if (m->pg_init_retries) | 
|  | DMEMIT("pg_init_retries %u ", m->pg_init_retries); | 
|  | if (m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT) | 
|  | DMEMIT("pg_init_delay_msecs %u ", m->pg_init_delay_msecs); | 
|  | } | 
|  |  | 
|  | if (!m->hw_handler_name || type == STATUSTYPE_INFO) | 
|  | DMEMIT("0 "); | 
|  | else | 
|  | DMEMIT("1 %s ", m->hw_handler_name); | 
|  |  | 
|  | DMEMIT("%u ", m->nr_priority_groups); | 
|  |  | 
|  | if (m->next_pg) | 
|  | pg_num = m->next_pg->pg_num; | 
|  | else if (m->current_pg) | 
|  | pg_num = m->current_pg->pg_num; | 
|  | else | 
|  | pg_num = (m->nr_priority_groups ? 1 : 0); | 
|  |  | 
|  | DMEMIT("%u ", pg_num); | 
|  |  | 
|  | switch (type) { | 
|  | case STATUSTYPE_INFO: | 
|  | list_for_each_entry(pg, &m->priority_groups, list) { | 
|  | if (pg->bypassed) | 
|  | state = 'D';	/* Disabled */ | 
|  | else if (pg == m->current_pg) | 
|  | state = 'A';	/* Currently Active */ | 
|  | else | 
|  | state = 'E';	/* Enabled */ | 
|  |  | 
|  | DMEMIT("%c ", state); | 
|  |  | 
|  | if (pg->ps.type->status) | 
|  | sz += pg->ps.type->status(&pg->ps, NULL, type, | 
|  | result + sz, | 
|  | maxlen - sz); | 
|  | else | 
|  | DMEMIT("0 "); | 
|  |  | 
|  | DMEMIT("%u %u ", pg->nr_pgpaths, | 
|  | pg->ps.type->info_args); | 
|  |  | 
|  | list_for_each_entry(p, &pg->pgpaths, list) { | 
|  | DMEMIT("%s %s %u ", p->path.dev->name, | 
|  | p->is_active ? "A" : "F", | 
|  | p->fail_count); | 
|  | if (pg->ps.type->status) | 
|  | sz += pg->ps.type->status(&pg->ps, | 
|  | &p->path, type, result + sz, | 
|  | maxlen - sz); | 
|  | } | 
|  | } | 
|  | break; | 
|  |  | 
|  | case STATUSTYPE_TABLE: | 
|  | list_for_each_entry(pg, &m->priority_groups, list) { | 
|  | DMEMIT("%s ", pg->ps.type->name); | 
|  |  | 
|  | if (pg->ps.type->status) | 
|  | sz += pg->ps.type->status(&pg->ps, NULL, type, | 
|  | result + sz, | 
|  | maxlen - sz); | 
|  | else | 
|  | DMEMIT("0 "); | 
|  |  | 
|  | DMEMIT("%u %u ", pg->nr_pgpaths, | 
|  | pg->ps.type->table_args); | 
|  |  | 
|  | list_for_each_entry(p, &pg->pgpaths, list) { | 
|  | DMEMIT("%s ", p->path.dev->name); | 
|  | if (pg->ps.type->status) | 
|  | sz += pg->ps.type->status(&pg->ps, | 
|  | &p->path, type, result + sz, | 
|  | maxlen - sz); | 
|  | } | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int multipath_message(struct dm_target *ti, unsigned argc, char **argv) | 
|  | { | 
|  | int r = -EINVAL; | 
|  | struct dm_dev *dev; | 
|  | struct multipath *m = (struct multipath *) ti->private; | 
|  | action_fn action; | 
|  |  | 
|  | mutex_lock(&m->work_mutex); | 
|  |  | 
|  | if (dm_suspended(ti)) { | 
|  | r = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (argc == 1) { | 
|  | if (!strnicmp(argv[0], MESG_STR("queue_if_no_path"))) { | 
|  | r = queue_if_no_path(m, 1, 0); | 
|  | goto out; | 
|  | } else if (!strnicmp(argv[0], MESG_STR("fail_if_no_path"))) { | 
|  | r = queue_if_no_path(m, 0, 0); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (argc != 2) { | 
|  | DMWARN("Unrecognised multipath message received."); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!strnicmp(argv[0], MESG_STR("disable_group"))) { | 
|  | r = bypass_pg_num(m, argv[1], 1); | 
|  | goto out; | 
|  | } else if (!strnicmp(argv[0], MESG_STR("enable_group"))) { | 
|  | r = bypass_pg_num(m, argv[1], 0); | 
|  | goto out; | 
|  | } else if (!strnicmp(argv[0], MESG_STR("switch_group"))) { | 
|  | r = switch_pg_num(m, argv[1]); | 
|  | goto out; | 
|  | } else if (!strnicmp(argv[0], MESG_STR("reinstate_path"))) | 
|  | action = reinstate_path; | 
|  | else if (!strnicmp(argv[0], MESG_STR("fail_path"))) | 
|  | action = fail_path; | 
|  | else { | 
|  | DMWARN("Unrecognised multipath message received."); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | r = dm_get_device(ti, argv[1], dm_table_get_mode(ti->table), &dev); | 
|  | if (r) { | 
|  | DMWARN("message: error getting device %s", | 
|  | argv[1]); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | r = action_dev(m, dev, action); | 
|  |  | 
|  | dm_put_device(ti, dev); | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&m->work_mutex); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static int multipath_ioctl(struct dm_target *ti, unsigned int cmd, | 
|  | unsigned long arg) | 
|  | { | 
|  | struct multipath *m = (struct multipath *) ti->private; | 
|  | struct block_device *bdev = NULL; | 
|  | fmode_t mode = 0; | 
|  | unsigned long flags; | 
|  | int r = 0; | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  |  | 
|  | if (!m->current_pgpath) | 
|  | __choose_pgpath(m, 0); | 
|  |  | 
|  | if (m->current_pgpath) { | 
|  | bdev = m->current_pgpath->path.dev->bdev; | 
|  | mode = m->current_pgpath->path.dev->mode; | 
|  | } | 
|  |  | 
|  | if (m->queue_io) | 
|  | r = -EAGAIN; | 
|  | else if (!bdev) | 
|  | r = -EIO; | 
|  |  | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  |  | 
|  | return r ? : __blkdev_driver_ioctl(bdev, mode, cmd, arg); | 
|  | } | 
|  |  | 
|  | static int multipath_iterate_devices(struct dm_target *ti, | 
|  | iterate_devices_callout_fn fn, void *data) | 
|  | { | 
|  | struct multipath *m = ti->private; | 
|  | struct priority_group *pg; | 
|  | struct pgpath *p; | 
|  | int ret = 0; | 
|  |  | 
|  | list_for_each_entry(pg, &m->priority_groups, list) { | 
|  | list_for_each_entry(p, &pg->pgpaths, list) { | 
|  | ret = fn(ti, p->path.dev, ti->begin, ti->len, data); | 
|  | if (ret) | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __pgpath_busy(struct pgpath *pgpath) | 
|  | { | 
|  | struct request_queue *q = bdev_get_queue(pgpath->path.dev->bdev); | 
|  |  | 
|  | return dm_underlying_device_busy(q); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We return "busy", only when we can map I/Os but underlying devices | 
|  | * are busy (so even if we map I/Os now, the I/Os will wait on | 
|  | * the underlying queue). | 
|  | * In other words, if we want to kill I/Os or queue them inside us | 
|  | * due to map unavailability, we don't return "busy".  Otherwise, | 
|  | * dm core won't give us the I/Os and we can't do what we want. | 
|  | */ | 
|  | static int multipath_busy(struct dm_target *ti) | 
|  | { | 
|  | int busy = 0, has_active = 0; | 
|  | struct multipath *m = ti->private; | 
|  | struct priority_group *pg; | 
|  | struct pgpath *pgpath; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&m->lock, flags); | 
|  |  | 
|  | /* Guess which priority_group will be used at next mapping time */ | 
|  | if (unlikely(!m->current_pgpath && m->next_pg)) | 
|  | pg = m->next_pg; | 
|  | else if (likely(m->current_pg)) | 
|  | pg = m->current_pg; | 
|  | else | 
|  | /* | 
|  | * We don't know which pg will be used at next mapping time. | 
|  | * We don't call __choose_pgpath() here to avoid to trigger | 
|  | * pg_init just by busy checking. | 
|  | * So we don't know whether underlying devices we will be using | 
|  | * at next mapping time are busy or not. Just try mapping. | 
|  | */ | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * If there is one non-busy active path at least, the path selector | 
|  | * will be able to select it. So we consider such a pg as not busy. | 
|  | */ | 
|  | busy = 1; | 
|  | list_for_each_entry(pgpath, &pg->pgpaths, list) | 
|  | if (pgpath->is_active) { | 
|  | has_active = 1; | 
|  |  | 
|  | if (!__pgpath_busy(pgpath)) { | 
|  | busy = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!has_active) | 
|  | /* | 
|  | * No active path in this pg, so this pg won't be used and | 
|  | * the current_pg will be changed at next mapping time. | 
|  | * We need to try mapping to determine it. | 
|  | */ | 
|  | busy = 0; | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&m->lock, flags); | 
|  |  | 
|  | return busy; | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------- | 
|  | * Module setup | 
|  | *---------------------------------------------------------------*/ | 
|  | static struct target_type multipath_target = { | 
|  | .name = "multipath", | 
|  | .version = {1, 3, 0}, | 
|  | .module = THIS_MODULE, | 
|  | .ctr = multipath_ctr, | 
|  | .dtr = multipath_dtr, | 
|  | .map_rq = multipath_map, | 
|  | .rq_end_io = multipath_end_io, | 
|  | .presuspend = multipath_presuspend, | 
|  | .postsuspend = multipath_postsuspend, | 
|  | .resume = multipath_resume, | 
|  | .status = multipath_status, | 
|  | .message = multipath_message, | 
|  | .ioctl  = multipath_ioctl, | 
|  | .iterate_devices = multipath_iterate_devices, | 
|  | .busy = multipath_busy, | 
|  | }; | 
|  |  | 
|  | static int __init dm_multipath_init(void) | 
|  | { | 
|  | int r; | 
|  |  | 
|  | /* allocate a slab for the dm_ios */ | 
|  | _mpio_cache = KMEM_CACHE(dm_mpath_io, 0); | 
|  | if (!_mpio_cache) | 
|  | return -ENOMEM; | 
|  |  | 
|  | r = dm_register_target(&multipath_target); | 
|  | if (r < 0) { | 
|  | DMERR("register failed %d", r); | 
|  | kmem_cache_destroy(_mpio_cache); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | kmultipathd = alloc_workqueue("kmpathd", WQ_MEM_RECLAIM, 0); | 
|  | if (!kmultipathd) { | 
|  | DMERR("failed to create workqueue kmpathd"); | 
|  | dm_unregister_target(&multipath_target); | 
|  | kmem_cache_destroy(_mpio_cache); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * A separate workqueue is used to handle the device handlers | 
|  | * to avoid overloading existing workqueue. Overloading the | 
|  | * old workqueue would also create a bottleneck in the | 
|  | * path of the storage hardware device activation. | 
|  | */ | 
|  | kmpath_handlerd = alloc_ordered_workqueue("kmpath_handlerd", | 
|  | WQ_MEM_RECLAIM); | 
|  | if (!kmpath_handlerd) { | 
|  | DMERR("failed to create workqueue kmpath_handlerd"); | 
|  | destroy_workqueue(kmultipathd); | 
|  | dm_unregister_target(&multipath_target); | 
|  | kmem_cache_destroy(_mpio_cache); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | DMINFO("version %u.%u.%u loaded", | 
|  | multipath_target.version[0], multipath_target.version[1], | 
|  | multipath_target.version[2]); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static void __exit dm_multipath_exit(void) | 
|  | { | 
|  | destroy_workqueue(kmpath_handlerd); | 
|  | destroy_workqueue(kmultipathd); | 
|  |  | 
|  | dm_unregister_target(&multipath_target); | 
|  | kmem_cache_destroy(_mpio_cache); | 
|  | } | 
|  |  | 
|  | module_init(dm_multipath_init); | 
|  | module_exit(dm_multipath_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION(DM_NAME " multipath target"); | 
|  | MODULE_AUTHOR("Sistina Software <dm-devel@redhat.com>"); | 
|  | MODULE_LICENSE("GPL"); |