| Kernel driver ads7828 |
| ===================== |
| |
| Supported chips: |
| * Texas Instruments/Burr-Brown ADS7828 |
| Prefix: 'ads7828' |
| Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4b |
| Datasheet: Publicly available at the Texas Instruments website : |
| http://focus.ti.com/lit/ds/symlink/ads7828.pdf |
| |
| Authors: |
| Steve Hardy <shardy@redhat.com> |
| |
| Module Parameters |
| ----------------- |
| |
| * se_input: bool (default Y) |
| Single ended operation - set to N for differential mode |
| * int_vref: bool (default Y) |
| Operate with the internal 2.5V reference - set to N for external reference |
| * vref_mv: int (default 2500) |
| If using an external reference, set this to the reference voltage in mV |
| |
| Description |
| ----------- |
| |
| This driver implements support for the Texas Instruments ADS7828. |
| |
| This device is a 12-bit 8-channel A-D converter. |
| |
| It can operate in single ended mode (8 +ve inputs) or in differential mode, |
| where 4 differential pairs can be measured. |
| |
| The chip also has the facility to use an external voltage reference. This |
| may be required if your hardware supplies the ADS7828 from a 5V supply, see |
| the datasheet for more details. |
