|  | /* | 
|  | * OMAP hardware spinlock driver | 
|  | * | 
|  | * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com | 
|  | * | 
|  | * Contact: Simon Que <sque@ti.com> | 
|  | *          Hari Kanigeri <h-kanigeri2@ti.com> | 
|  | *          Ohad Ben-Cohen <ohad@wizery.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/hwspinlock.h> | 
|  | #include <linux/platform_device.h> | 
|  |  | 
|  | #include "hwspinlock_internal.h" | 
|  |  | 
|  | /* Spinlock register offsets */ | 
|  | #define SYSSTATUS_OFFSET		0x0014 | 
|  | #define LOCK_BASE_OFFSET		0x0800 | 
|  |  | 
|  | #define SPINLOCK_NUMLOCKS_BIT_OFFSET	(24) | 
|  |  | 
|  | /* Possible values of SPINLOCK_LOCK_REG */ | 
|  | #define SPINLOCK_NOTTAKEN		(0)	/* free */ | 
|  | #define SPINLOCK_TAKEN			(1)	/* locked */ | 
|  |  | 
|  | #define to_omap_hwspinlock(lock)	\ | 
|  | container_of(lock, struct omap_hwspinlock, lock) | 
|  |  | 
|  | struct omap_hwspinlock { | 
|  | struct hwspinlock lock; | 
|  | void __iomem *addr; | 
|  | }; | 
|  |  | 
|  | struct omap_hwspinlock_state { | 
|  | int num_locks;			/* Total number of locks in system */ | 
|  | void __iomem *io_base;		/* Mapped base address */ | 
|  | }; | 
|  |  | 
|  | static int omap_hwspinlock_trylock(struct hwspinlock *lock) | 
|  | { | 
|  | struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock); | 
|  |  | 
|  | /* attempt to acquire the lock by reading its value */ | 
|  | return (SPINLOCK_NOTTAKEN == readl(omap_lock->addr)); | 
|  | } | 
|  |  | 
|  | static void omap_hwspinlock_unlock(struct hwspinlock *lock) | 
|  | { | 
|  | struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock); | 
|  |  | 
|  | /* release the lock by writing 0 to it */ | 
|  | writel(SPINLOCK_NOTTAKEN, omap_lock->addr); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * relax the OMAP interconnect while spinning on it. | 
|  | * | 
|  | * The specs recommended that the retry delay time will be | 
|  | * just over half of the time that a requester would be | 
|  | * expected to hold the lock. | 
|  | * | 
|  | * The number below is taken from an hardware specs example, | 
|  | * obviously it is somewhat arbitrary. | 
|  | */ | 
|  | static void omap_hwspinlock_relax(struct hwspinlock *lock) | 
|  | { | 
|  | ndelay(50); | 
|  | } | 
|  |  | 
|  | static const struct hwspinlock_ops omap_hwspinlock_ops = { | 
|  | .trylock = omap_hwspinlock_trylock, | 
|  | .unlock = omap_hwspinlock_unlock, | 
|  | .relax = omap_hwspinlock_relax, | 
|  | }; | 
|  |  | 
|  | static int __devinit omap_hwspinlock_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct omap_hwspinlock *omap_lock; | 
|  | struct omap_hwspinlock_state *state; | 
|  | struct hwspinlock *lock; | 
|  | struct resource *res; | 
|  | void __iomem *io_base; | 
|  | int i, ret; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!res) | 
|  | return -ENODEV; | 
|  |  | 
|  | state = kzalloc(sizeof(*state), GFP_KERNEL); | 
|  | if (!state) | 
|  | return -ENOMEM; | 
|  |  | 
|  | io_base = ioremap(res->start, resource_size(res)); | 
|  | if (!io_base) { | 
|  | ret = -ENOMEM; | 
|  | goto free_state; | 
|  | } | 
|  |  | 
|  | /* Determine number of locks */ | 
|  | i = readl(io_base + SYSSTATUS_OFFSET); | 
|  | i >>= SPINLOCK_NUMLOCKS_BIT_OFFSET; | 
|  |  | 
|  | /* one of the four lsb's must be set, and nothing else */ | 
|  | if (hweight_long(i & 0xf) != 1 || i > 8) { | 
|  | ret = -EINVAL; | 
|  | goto iounmap_base; | 
|  | } | 
|  |  | 
|  | state->num_locks = i * 32; | 
|  | state->io_base = io_base; | 
|  |  | 
|  | platform_set_drvdata(pdev, state); | 
|  |  | 
|  | /* | 
|  | * runtime PM will make sure the clock of this module is | 
|  | * enabled iff at least one lock is requested | 
|  | */ | 
|  | pm_runtime_enable(&pdev->dev); | 
|  |  | 
|  | for (i = 0; i < state->num_locks; i++) { | 
|  | omap_lock = kzalloc(sizeof(*omap_lock), GFP_KERNEL); | 
|  | if (!omap_lock) { | 
|  | ret = -ENOMEM; | 
|  | goto free_locks; | 
|  | } | 
|  |  | 
|  | omap_lock->lock.dev = &pdev->dev; | 
|  | omap_lock->lock.owner = THIS_MODULE; | 
|  | omap_lock->lock.id = i; | 
|  | omap_lock->lock.ops = &omap_hwspinlock_ops; | 
|  | omap_lock->addr = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i; | 
|  |  | 
|  | ret = hwspin_lock_register(&omap_lock->lock); | 
|  | if (ret) { | 
|  | kfree(omap_lock); | 
|  | goto free_locks; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | free_locks: | 
|  | while (--i >= 0) { | 
|  | lock = hwspin_lock_unregister(i); | 
|  | /* this should't happen, but let's give our best effort */ | 
|  | if (!lock) { | 
|  | dev_err(&pdev->dev, "%s: cleanups failed\n", __func__); | 
|  | continue; | 
|  | } | 
|  | omap_lock = to_omap_hwspinlock(lock); | 
|  | kfree(omap_lock); | 
|  | } | 
|  | pm_runtime_disable(&pdev->dev); | 
|  | iounmap_base: | 
|  | iounmap(io_base); | 
|  | free_state: | 
|  | kfree(state); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int omap_hwspinlock_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct omap_hwspinlock_state *state = platform_get_drvdata(pdev); | 
|  | struct hwspinlock *lock; | 
|  | struct omap_hwspinlock *omap_lock; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < state->num_locks; i++) { | 
|  | lock = hwspin_lock_unregister(i); | 
|  | /* this shouldn't happen at this point. if it does, at least | 
|  | * don't continue with the remove */ | 
|  | if (!lock) { | 
|  | dev_err(&pdev->dev, "%s: failed on %d\n", __func__, i); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | omap_lock = to_omap_hwspinlock(lock); | 
|  | kfree(omap_lock); | 
|  | } | 
|  |  | 
|  | pm_runtime_disable(&pdev->dev); | 
|  | iounmap(state->io_base); | 
|  | kfree(state); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver omap_hwspinlock_driver = { | 
|  | .probe		= omap_hwspinlock_probe, | 
|  | .remove		= omap_hwspinlock_remove, | 
|  | .driver		= { | 
|  | .name	= "omap_hwspinlock", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init omap_hwspinlock_init(void) | 
|  | { | 
|  | return platform_driver_register(&omap_hwspinlock_driver); | 
|  | } | 
|  | /* board init code might need to reserve hwspinlocks for predefined purposes */ | 
|  | postcore_initcall(omap_hwspinlock_init); | 
|  |  | 
|  | static void __exit omap_hwspinlock_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&omap_hwspinlock_driver); | 
|  | } | 
|  | module_exit(omap_hwspinlock_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_DESCRIPTION("Hardware spinlock driver for OMAP"); | 
|  | MODULE_AUTHOR("Simon Que <sque@ti.com>"); | 
|  | MODULE_AUTHOR("Hari Kanigeri <h-kanigeri2@ti.com>"); | 
|  | MODULE_AUTHOR("Ohad Ben-Cohen <ohad@wizery.com>"); |