|  | /* | 
|  | * Interface handling (except master interface) | 
|  | * | 
|  | * Copyright 2002-2005, Instant802 Networks, Inc. | 
|  | * Copyright 2005-2006, Devicescape Software, Inc. | 
|  | * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz> | 
|  | * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  | #include <linux/slab.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/rtnetlink.h> | 
|  | #include <net/mac80211.h> | 
|  | #include <net/ieee80211_radiotap.h> | 
|  | #include "ieee80211_i.h" | 
|  | #include "sta_info.h" | 
|  | #include "debugfs_netdev.h" | 
|  | #include "mesh.h" | 
|  | #include "led.h" | 
|  | #include "driver-ops.h" | 
|  | #include "wme.h" | 
|  | #include "rate.h" | 
|  |  | 
|  | /** | 
|  | * DOC: Interface list locking | 
|  | * | 
|  | * The interface list in each struct ieee80211_local is protected | 
|  | * three-fold: | 
|  | * | 
|  | * (1) modifications may only be done under the RTNL | 
|  | * (2) modifications and readers are protected against each other by | 
|  | *     the iflist_mtx. | 
|  | * (3) modifications are done in an RCU manner so atomic readers | 
|  | *     can traverse the list in RCU-safe blocks. | 
|  | * | 
|  | * As a consequence, reads (traversals) of the list can be protected | 
|  | * by either the RTNL, the iflist_mtx or RCU. | 
|  | */ | 
|  |  | 
|  |  | 
|  | static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) | 
|  | { | 
|  | int meshhdrlen; | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | meshhdrlen = (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) ? 5 : 0; | 
|  |  | 
|  | /* FIX: what would be proper limits for MTU? | 
|  | * This interface uses 802.3 frames. */ | 
|  | if (new_mtu < 256 || | 
|  | new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu); | 
|  | #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ | 
|  | dev->mtu = new_mtu; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_change_mac(struct net_device *dev, void *addr) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct sockaddr *sa = addr; | 
|  | int ret; | 
|  |  | 
|  | if (ieee80211_sdata_running(sdata)) | 
|  | return -EBUSY; | 
|  |  | 
|  | ret = eth_mac_addr(dev, sa); | 
|  |  | 
|  | if (ret == 0) | 
|  | memcpy(sdata->vif.addr, sa->sa_data, ETH_ALEN); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline int identical_mac_addr_allowed(int type1, int type2) | 
|  | { | 
|  | return type1 == NL80211_IFTYPE_MONITOR || | 
|  | type2 == NL80211_IFTYPE_MONITOR || | 
|  | (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) || | 
|  | (type1 == NL80211_IFTYPE_WDS && | 
|  | (type2 == NL80211_IFTYPE_WDS || | 
|  | type2 == NL80211_IFTYPE_AP)) || | 
|  | (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) || | 
|  | (type1 == NL80211_IFTYPE_AP_VLAN && | 
|  | (type2 == NL80211_IFTYPE_AP || | 
|  | type2 == NL80211_IFTYPE_AP_VLAN)); | 
|  | } | 
|  |  | 
|  | static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata, | 
|  | enum nl80211_iftype iftype) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_sub_if_data *nsdata; | 
|  | struct net_device *dev = sdata->dev; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | /* we hold the RTNL here so can safely walk the list */ | 
|  | list_for_each_entry(nsdata, &local->interfaces, list) { | 
|  | struct net_device *ndev = nsdata->dev; | 
|  |  | 
|  | if (ndev != dev && ieee80211_sdata_running(nsdata)) { | 
|  | /* | 
|  | * Allow only a single IBSS interface to be up at any | 
|  | * time. This is restricted because beacon distribution | 
|  | * cannot work properly if both are in the same IBSS. | 
|  | * | 
|  | * To remove this restriction we'd have to disallow them | 
|  | * from setting the same SSID on different IBSS interfaces | 
|  | * belonging to the same hardware. Then, however, we're | 
|  | * faced with having to adopt two different TSF timers... | 
|  | */ | 
|  | if (iftype == NL80211_IFTYPE_ADHOC && | 
|  | nsdata->vif.type == NL80211_IFTYPE_ADHOC) | 
|  | return -EBUSY; | 
|  |  | 
|  | /* | 
|  | * The remaining checks are only performed for interfaces | 
|  | * with the same MAC address. | 
|  | */ | 
|  | if (compare_ether_addr(dev->dev_addr, ndev->dev_addr)) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * check whether it may have the same address | 
|  | */ | 
|  | if (!identical_mac_addr_allowed(iftype, | 
|  | nsdata->vif.type)) | 
|  | return -ENOTUNIQ; | 
|  |  | 
|  | /* | 
|  | * can only add VLANs to enabled APs | 
|  | */ | 
|  | if (iftype == NL80211_IFTYPE_AP_VLAN && | 
|  | nsdata->vif.type == NL80211_IFTYPE_AP) | 
|  | sdata->bss = &nsdata->u.ap; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata, | 
|  | const int offset) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | u32 flags = sdata->u.mntr_flags; | 
|  |  | 
|  | #define ADJUST(_f, _s)	do {					\ | 
|  | if (flags & MONITOR_FLAG_##_f)				\ | 
|  | local->fif_##_s += offset;			\ | 
|  | } while (0) | 
|  |  | 
|  | ADJUST(FCSFAIL, fcsfail); | 
|  | ADJUST(PLCPFAIL, plcpfail); | 
|  | ADJUST(CONTROL, control); | 
|  | ADJUST(CONTROL, pspoll); | 
|  | ADJUST(OTHER_BSS, other_bss); | 
|  |  | 
|  | #undef ADJUST | 
|  | } | 
|  |  | 
|  | /* | 
|  | * NOTE: Be very careful when changing this function, it must NOT return | 
|  | * an error on interface type changes that have been pre-checked, so most | 
|  | * checks should be in ieee80211_check_concurrent_iface. | 
|  | */ | 
|  | static int ieee80211_do_open(struct net_device *dev, bool coming_up) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sta_info *sta; | 
|  | u32 changed = 0; | 
|  | int res; | 
|  | u32 hw_reconf_flags = 0; | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_WDS: | 
|  | if (!is_valid_ether_addr(sdata->u.wds.remote_addr)) | 
|  | return -ENOLINK; | 
|  | break; | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | if (!sdata->bss) | 
|  | return -ENOLINK; | 
|  | list_add(&sdata->u.vlan.list, &sdata->bss->vlans); | 
|  | break; | 
|  | case NL80211_IFTYPE_AP: | 
|  | sdata->bss = &sdata->u.ap; | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | /* no special treatment */ | 
|  | break; | 
|  | case NL80211_IFTYPE_UNSPECIFIED: | 
|  | case NUM_NL80211_IFTYPES: | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | /* cannot happen */ | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (local->open_count == 0) { | 
|  | res = drv_start(local); | 
|  | if (res) | 
|  | goto err_del_bss; | 
|  | if (local->ops->napi_poll) | 
|  | napi_enable(&local->napi); | 
|  | /* we're brought up, everything changes */ | 
|  | hw_reconf_flags = ~0; | 
|  | ieee80211_led_radio(local, true); | 
|  | ieee80211_mod_tpt_led_trig(local, | 
|  | IEEE80211_TPT_LEDTRIG_FL_RADIO, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Copy the hopefully now-present MAC address to | 
|  | * this interface, if it has the special null one. | 
|  | */ | 
|  | if (is_zero_ether_addr(dev->dev_addr)) { | 
|  | memcpy(dev->dev_addr, | 
|  | local->hw.wiphy->perm_addr, | 
|  | ETH_ALEN); | 
|  | memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN); | 
|  |  | 
|  | if (!is_valid_ether_addr(dev->dev_addr)) { | 
|  | if (!local->open_count) | 
|  | drv_stop(local); | 
|  | return -EADDRNOTAVAIL; | 
|  | } | 
|  | } | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | /* no need to tell driver */ | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) { | 
|  | local->cooked_mntrs++; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* must be before the call to ieee80211_configure_filter */ | 
|  | local->monitors++; | 
|  | if (local->monitors == 1) { | 
|  | local->hw.conf.flags |= IEEE80211_CONF_MONITOR; | 
|  | hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR; | 
|  | } | 
|  |  | 
|  | ieee80211_adjust_monitor_flags(sdata, 1); | 
|  | ieee80211_configure_filter(local); | 
|  |  | 
|  | netif_carrier_on(dev); | 
|  | break; | 
|  | default: | 
|  | if (coming_up) { | 
|  | res = drv_add_interface(local, &sdata->vif); | 
|  | if (res) | 
|  | goto err_stop; | 
|  | } | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) { | 
|  | local->fif_pspoll++; | 
|  | local->fif_probe_req++; | 
|  |  | 
|  | ieee80211_configure_filter(local); | 
|  | } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { | 
|  | local->fif_probe_req++; | 
|  | } | 
|  |  | 
|  | changed |= ieee80211_reset_erp_info(sdata); | 
|  | ieee80211_bss_info_change_notify(sdata, changed); | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_STATION) | 
|  | netif_carrier_off(dev); | 
|  | else | 
|  | netif_carrier_on(dev); | 
|  | } | 
|  |  | 
|  | set_bit(SDATA_STATE_RUNNING, &sdata->state); | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_WDS) { | 
|  | /* Create STA entry for the WDS peer */ | 
|  | sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr, | 
|  | GFP_KERNEL); | 
|  | if (!sta) { | 
|  | res = -ENOMEM; | 
|  | goto err_del_interface; | 
|  | } | 
|  |  | 
|  | /* no locking required since STA is not live yet */ | 
|  | sta->flags |= WLAN_STA_AUTHORIZED; | 
|  |  | 
|  | res = sta_info_insert(sta); | 
|  | if (res) { | 
|  | /* STA has been freed */ | 
|  | goto err_del_interface; | 
|  | } | 
|  |  | 
|  | rate_control_rate_init(sta); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * set_multicast_list will be invoked by the networking core | 
|  | * which will check whether any increments here were done in | 
|  | * error and sync them down to the hardware as filter flags. | 
|  | */ | 
|  | if (sdata->flags & IEEE80211_SDATA_ALLMULTI) | 
|  | atomic_inc(&local->iff_allmultis); | 
|  |  | 
|  | if (sdata->flags & IEEE80211_SDATA_PROMISC) | 
|  | atomic_inc(&local->iff_promiscs); | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | hw_reconf_flags |= __ieee80211_recalc_idle(local); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | if (coming_up) | 
|  | local->open_count++; | 
|  |  | 
|  | if (hw_reconf_flags) { | 
|  | ieee80211_hw_config(local, hw_reconf_flags); | 
|  | /* | 
|  | * set default queue parameters so drivers don't | 
|  | * need to initialise the hardware if the hardware | 
|  | * doesn't start up with sane defaults | 
|  | */ | 
|  | ieee80211_set_wmm_default(sdata); | 
|  | } | 
|  |  | 
|  | ieee80211_recalc_ps(local, -1); | 
|  |  | 
|  | netif_tx_start_all_queues(dev); | 
|  |  | 
|  | return 0; | 
|  | err_del_interface: | 
|  | drv_remove_interface(local, &sdata->vif); | 
|  | err_stop: | 
|  | if (!local->open_count) | 
|  | drv_stop(local); | 
|  | err_del_bss: | 
|  | sdata->bss = NULL; | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
|  | list_del(&sdata->u.vlan.list); | 
|  | clear_bit(SDATA_STATE_RUNNING, &sdata->state); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int ieee80211_open(struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | int err; | 
|  |  | 
|  | /* fail early if user set an invalid address */ | 
|  | if (!is_zero_ether_addr(dev->dev_addr) && | 
|  | !is_valid_ether_addr(dev->dev_addr)) | 
|  | return -EADDRNOTAVAIL; | 
|  |  | 
|  | err = ieee80211_check_concurrent_iface(sdata, sdata->vif.type); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return ieee80211_do_open(dev, true); | 
|  | } | 
|  |  | 
|  | static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, | 
|  | bool going_down) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | unsigned long flags; | 
|  | struct sk_buff *skb, *tmp; | 
|  | u32 hw_reconf_flags = 0; | 
|  | int i; | 
|  | enum nl80211_channel_type orig_ct; | 
|  |  | 
|  | clear_bit(SDATA_STATE_RUNNING, &sdata->state); | 
|  |  | 
|  | if (local->scan_sdata == sdata) | 
|  | ieee80211_scan_cancel(local); | 
|  |  | 
|  | /* | 
|  | * Stop TX on this interface first. | 
|  | */ | 
|  | netif_tx_stop_all_queues(sdata->dev); | 
|  |  | 
|  | /* | 
|  | * Purge work for this interface. | 
|  | */ | 
|  | ieee80211_work_purge(sdata); | 
|  |  | 
|  | /* | 
|  | * Remove all stations associated with this interface. | 
|  | * | 
|  | * This must be done before calling ops->remove_interface() | 
|  | * because otherwise we can later invoke ops->sta_notify() | 
|  | * whenever the STAs are removed, and that invalidates driver | 
|  | * assumptions about always getting a vif pointer that is valid | 
|  | * (because if we remove a STA after ops->remove_interface() | 
|  | * the driver will have removed the vif info already!) | 
|  | * | 
|  | * This is relevant only in AP, WDS and mesh modes, since in | 
|  | * all other modes we've already removed all stations when | 
|  | * disconnecting etc. | 
|  | */ | 
|  | sta_info_flush(local, sdata); | 
|  |  | 
|  | /* | 
|  | * Don't count this interface for promisc/allmulti while it | 
|  | * is down. dev_mc_unsync() will invoke set_multicast_list | 
|  | * on the master interface which will sync these down to the | 
|  | * hardware as filter flags. | 
|  | */ | 
|  | if (sdata->flags & IEEE80211_SDATA_ALLMULTI) | 
|  | atomic_dec(&local->iff_allmultis); | 
|  |  | 
|  | if (sdata->flags & IEEE80211_SDATA_PROMISC) | 
|  | atomic_dec(&local->iff_promiscs); | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) { | 
|  | local->fif_pspoll--; | 
|  | local->fif_probe_req--; | 
|  | } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { | 
|  | local->fif_probe_req--; | 
|  | } | 
|  |  | 
|  | netif_addr_lock_bh(sdata->dev); | 
|  | spin_lock_bh(&local->filter_lock); | 
|  | __hw_addr_unsync(&local->mc_list, &sdata->dev->mc, | 
|  | sdata->dev->addr_len); | 
|  | spin_unlock_bh(&local->filter_lock); | 
|  | netif_addr_unlock_bh(sdata->dev); | 
|  |  | 
|  | ieee80211_configure_filter(local); | 
|  |  | 
|  | del_timer_sync(&local->dynamic_ps_timer); | 
|  | cancel_work_sync(&local->dynamic_ps_enable_work); | 
|  |  | 
|  | /* APs need special treatment */ | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) { | 
|  | struct ieee80211_sub_if_data *vlan, *tmpsdata; | 
|  | struct beacon_data *old_beacon = | 
|  | rtnl_dereference(sdata->u.ap.beacon); | 
|  |  | 
|  | /* sdata_running will return false, so this will disable */ | 
|  | ieee80211_bss_info_change_notify(sdata, | 
|  | BSS_CHANGED_BEACON_ENABLED); | 
|  |  | 
|  | /* remove beacon */ | 
|  | rcu_assign_pointer(sdata->u.ap.beacon, NULL); | 
|  | synchronize_rcu(); | 
|  | kfree(old_beacon); | 
|  |  | 
|  | /* free all potentially still buffered bcast frames */ | 
|  | while ((skb = skb_dequeue(&sdata->u.ap.ps_bc_buf))) { | 
|  | local->total_ps_buffered--; | 
|  | dev_kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | /* down all dependent devices, that is VLANs */ | 
|  | list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans, | 
|  | u.vlan.list) | 
|  | dev_close(vlan->dev); | 
|  | WARN_ON(!list_empty(&sdata->u.ap.vlans)); | 
|  | } | 
|  |  | 
|  | if (going_down) | 
|  | local->open_count--; | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | list_del(&sdata->u.vlan.list); | 
|  | /* no need to tell driver */ | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) { | 
|  | local->cooked_mntrs--; | 
|  | break; | 
|  | } | 
|  |  | 
|  | local->monitors--; | 
|  | if (local->monitors == 0) { | 
|  | local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR; | 
|  | hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR; | 
|  | } | 
|  |  | 
|  | ieee80211_adjust_monitor_flags(sdata, -1); | 
|  | ieee80211_configure_filter(local); | 
|  | break; | 
|  | default: | 
|  | flush_work(&sdata->work); | 
|  | /* | 
|  | * When we get here, the interface is marked down. | 
|  | * Call synchronize_rcu() to wait for the RX path | 
|  | * should it be using the interface and enqueuing | 
|  | * frames at this very time on another CPU. | 
|  | */ | 
|  | synchronize_rcu(); | 
|  | skb_queue_purge(&sdata->skb_queue); | 
|  |  | 
|  | /* | 
|  | * Disable beaconing here for mesh only, AP and IBSS | 
|  | * are already taken care of. | 
|  | */ | 
|  | if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) | 
|  | ieee80211_bss_info_change_notify(sdata, | 
|  | BSS_CHANGED_BEACON_ENABLED); | 
|  |  | 
|  | /* | 
|  | * Free all remaining keys, there shouldn't be any, | 
|  | * except maybe group keys in AP more or WDS? | 
|  | */ | 
|  | ieee80211_free_keys(sdata); | 
|  |  | 
|  | if (going_down) | 
|  | drv_remove_interface(local, &sdata->vif); | 
|  | } | 
|  |  | 
|  | sdata->bss = NULL; | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | hw_reconf_flags |= __ieee80211_recalc_idle(local); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | ieee80211_recalc_ps(local, -1); | 
|  |  | 
|  | if (local->open_count == 0) { | 
|  | if (local->ops->napi_poll) | 
|  | napi_disable(&local->napi); | 
|  | ieee80211_clear_tx_pending(local); | 
|  | ieee80211_stop_device(local); | 
|  |  | 
|  | /* no reconfiguring after stop! */ | 
|  | hw_reconf_flags = 0; | 
|  | } | 
|  |  | 
|  | /* Re-calculate channel-type, in case there are multiple vifs | 
|  | * on different channel types. | 
|  | */ | 
|  | orig_ct = local->_oper_channel_type; | 
|  | ieee80211_set_channel_type(local, NULL, NL80211_CHAN_NO_HT); | 
|  |  | 
|  | /* do after stop to avoid reconfiguring when we stop anyway */ | 
|  | if (hw_reconf_flags || (orig_ct != local->_oper_channel_type)) | 
|  | ieee80211_hw_config(local, hw_reconf_flags); | 
|  |  | 
|  | spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | 
|  | for (i = 0; i < IEEE80211_MAX_QUEUES; i++) { | 
|  | skb_queue_walk_safe(&local->pending[i], skb, tmp) { | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | if (info->control.vif == &sdata->vif) { | 
|  | __skb_unlink(skb, &local->pending[i]); | 
|  | dev_kfree_skb_irq(skb); | 
|  | } | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | 
|  | } | 
|  |  | 
|  | static int ieee80211_stop(struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | ieee80211_do_stop(sdata, true); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ieee80211_set_multicast_list(struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | int allmulti, promisc, sdata_allmulti, sdata_promisc; | 
|  |  | 
|  | allmulti = !!(dev->flags & IFF_ALLMULTI); | 
|  | promisc = !!(dev->flags & IFF_PROMISC); | 
|  | sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI); | 
|  | sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC); | 
|  |  | 
|  | if (allmulti != sdata_allmulti) { | 
|  | if (dev->flags & IFF_ALLMULTI) | 
|  | atomic_inc(&local->iff_allmultis); | 
|  | else | 
|  | atomic_dec(&local->iff_allmultis); | 
|  | sdata->flags ^= IEEE80211_SDATA_ALLMULTI; | 
|  | } | 
|  |  | 
|  | if (promisc != sdata_promisc) { | 
|  | if (dev->flags & IFF_PROMISC) | 
|  | atomic_inc(&local->iff_promiscs); | 
|  | else | 
|  | atomic_dec(&local->iff_promiscs); | 
|  | sdata->flags ^= IEEE80211_SDATA_PROMISC; | 
|  | } | 
|  | spin_lock_bh(&local->filter_lock); | 
|  | __hw_addr_sync(&local->mc_list, &dev->mc, dev->addr_len); | 
|  | spin_unlock_bh(&local->filter_lock); | 
|  | ieee80211_queue_work(&local->hw, &local->reconfig_filter); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called when the netdev is removed or, by the code below, before | 
|  | * the interface type changes. | 
|  | */ | 
|  | static void ieee80211_teardown_sdata(struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | int flushed; | 
|  | int i; | 
|  |  | 
|  | /* free extra data */ | 
|  | ieee80211_free_keys(sdata); | 
|  |  | 
|  | ieee80211_debugfs_remove_netdev(sdata); | 
|  |  | 
|  | for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) | 
|  | __skb_queue_purge(&sdata->fragments[i].skb_list); | 
|  | sdata->fragment_next = 0; | 
|  |  | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | mesh_rmc_free(sdata); | 
|  |  | 
|  | flushed = sta_info_flush(local, sdata); | 
|  | WARN_ON(flushed); | 
|  | } | 
|  |  | 
|  | static u16 ieee80211_netdev_select_queue(struct net_device *dev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops ieee80211_dataif_ops = { | 
|  | .ndo_open		= ieee80211_open, | 
|  | .ndo_stop		= ieee80211_stop, | 
|  | .ndo_uninit		= ieee80211_teardown_sdata, | 
|  | .ndo_start_xmit		= ieee80211_subif_start_xmit, | 
|  | .ndo_set_multicast_list = ieee80211_set_multicast_list, | 
|  | .ndo_change_mtu 	= ieee80211_change_mtu, | 
|  | .ndo_set_mac_address 	= ieee80211_change_mac, | 
|  | .ndo_select_queue	= ieee80211_netdev_select_queue, | 
|  | }; | 
|  |  | 
|  | static u16 ieee80211_monitor_select_queue(struct net_device *dev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct ieee80211_radiotap_header *rtap = (void *)skb->data; | 
|  | u8 *p; | 
|  |  | 
|  | if (local->hw.queues < 4) | 
|  | return 0; | 
|  |  | 
|  | if (skb->len < 4 || | 
|  | skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */) | 
|  | return 0; /* doesn't matter, frame will be dropped */ | 
|  |  | 
|  | hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len)); | 
|  |  | 
|  | if (!ieee80211_is_data(hdr->frame_control)) { | 
|  | skb->priority = 7; | 
|  | return ieee802_1d_to_ac[skb->priority]; | 
|  | } | 
|  | if (!ieee80211_is_data_qos(hdr->frame_control)) { | 
|  | skb->priority = 0; | 
|  | return ieee802_1d_to_ac[skb->priority]; | 
|  | } | 
|  |  | 
|  | p = ieee80211_get_qos_ctl(hdr); | 
|  | skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK; | 
|  |  | 
|  | return ieee80211_downgrade_queue(local, skb); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops ieee80211_monitorif_ops = { | 
|  | .ndo_open		= ieee80211_open, | 
|  | .ndo_stop		= ieee80211_stop, | 
|  | .ndo_uninit		= ieee80211_teardown_sdata, | 
|  | .ndo_start_xmit		= ieee80211_monitor_start_xmit, | 
|  | .ndo_set_multicast_list = ieee80211_set_multicast_list, | 
|  | .ndo_change_mtu 	= ieee80211_change_mtu, | 
|  | .ndo_set_mac_address 	= eth_mac_addr, | 
|  | .ndo_select_queue	= ieee80211_monitor_select_queue, | 
|  | }; | 
|  |  | 
|  | static void ieee80211_if_setup(struct net_device *dev) | 
|  | { | 
|  | ether_setup(dev); | 
|  | dev->netdev_ops = &ieee80211_dataif_ops; | 
|  | dev->destructor = free_netdev; | 
|  | } | 
|  |  | 
|  | static void ieee80211_iface_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | container_of(work, struct ieee80211_sub_if_data, work); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sk_buff *skb; | 
|  | struct sta_info *sta; | 
|  | struct ieee80211_ra_tid *ra_tid; | 
|  |  | 
|  | if (!ieee80211_sdata_running(sdata)) | 
|  | return; | 
|  |  | 
|  | if (local->scanning) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * ieee80211_queue_work() should have picked up most cases, | 
|  | * here we'll pick the rest. | 
|  | */ | 
|  | if (WARN(local->suspended, | 
|  | "interface work scheduled while going to suspend\n")) | 
|  | return; | 
|  |  | 
|  | /* first process frames */ | 
|  | while ((skb = skb_dequeue(&sdata->skb_queue))) { | 
|  | struct ieee80211_mgmt *mgmt = (void *)skb->data; | 
|  |  | 
|  | if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_START) { | 
|  | ra_tid = (void *)&skb->cb; | 
|  | ieee80211_start_tx_ba_cb(&sdata->vif, ra_tid->ra, | 
|  | ra_tid->tid); | 
|  | } else if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_STOP) { | 
|  | ra_tid = (void *)&skb->cb; | 
|  | ieee80211_stop_tx_ba_cb(&sdata->vif, ra_tid->ra, | 
|  | ra_tid->tid); | 
|  | } else if (ieee80211_is_action(mgmt->frame_control) && | 
|  | mgmt->u.action.category == WLAN_CATEGORY_BACK) { | 
|  | int len = skb->len; | 
|  |  | 
|  | mutex_lock(&local->sta_mtx); | 
|  | sta = sta_info_get_bss(sdata, mgmt->sa); | 
|  | if (sta) { | 
|  | switch (mgmt->u.action.u.addba_req.action_code) { | 
|  | case WLAN_ACTION_ADDBA_REQ: | 
|  | ieee80211_process_addba_request( | 
|  | local, sta, mgmt, len); | 
|  | break; | 
|  | case WLAN_ACTION_ADDBA_RESP: | 
|  | ieee80211_process_addba_resp(local, sta, | 
|  | mgmt, len); | 
|  | break; | 
|  | case WLAN_ACTION_DELBA: | 
|  | ieee80211_process_delba(sdata, sta, | 
|  | mgmt, len); | 
|  | break; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&local->sta_mtx); | 
|  | } else if (ieee80211_is_data_qos(mgmt->frame_control)) { | 
|  | struct ieee80211_hdr *hdr = (void *)mgmt; | 
|  | /* | 
|  | * So the frame isn't mgmt, but frame_control | 
|  | * is at the right place anyway, of course, so | 
|  | * the if statement is correct. | 
|  | * | 
|  | * Warn if we have other data frame types here, | 
|  | * they must not get here. | 
|  | */ | 
|  | WARN_ON(hdr->frame_control & | 
|  | cpu_to_le16(IEEE80211_STYPE_NULLFUNC)); | 
|  | WARN_ON(!(hdr->seq_ctrl & | 
|  | cpu_to_le16(IEEE80211_SCTL_FRAG))); | 
|  | /* | 
|  | * This was a fragment of a frame, received while | 
|  | * a block-ack session was active. That cannot be | 
|  | * right, so terminate the session. | 
|  | */ | 
|  | mutex_lock(&local->sta_mtx); | 
|  | sta = sta_info_get_bss(sdata, mgmt->sa); | 
|  | if (sta) { | 
|  | u16 tid = *ieee80211_get_qos_ctl(hdr) & | 
|  | IEEE80211_QOS_CTL_TID_MASK; | 
|  |  | 
|  | __ieee80211_stop_rx_ba_session( | 
|  | sta, tid, WLAN_BACK_RECIPIENT, | 
|  | WLAN_REASON_QSTA_REQUIRE_SETUP, | 
|  | true); | 
|  | } | 
|  | mutex_unlock(&local->sta_mtx); | 
|  | } else switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | ieee80211_sta_rx_queued_mgmt(sdata, skb); | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | ieee80211_ibss_rx_queued_mgmt(sdata, skb); | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (!ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | break; | 
|  | ieee80211_mesh_rx_queued_mgmt(sdata, skb); | 
|  | break; | 
|  | default: | 
|  | WARN(1, "frame for unexpected interface type"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | /* then other type-dependent work */ | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | ieee80211_sta_work(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | ieee80211_ibss_work(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (!ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | break; | 
|  | ieee80211_mesh_work(sdata); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Helper function to initialise an interface to a specific type. | 
|  | */ | 
|  | static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, | 
|  | enum nl80211_iftype type) | 
|  | { | 
|  | /* clear type-dependent union */ | 
|  | memset(&sdata->u, 0, sizeof(sdata->u)); | 
|  |  | 
|  | /* and set some type-dependent values */ | 
|  | sdata->vif.type = type; | 
|  | sdata->vif.p2p = false; | 
|  | sdata->dev->netdev_ops = &ieee80211_dataif_ops; | 
|  | sdata->wdev.iftype = type; | 
|  |  | 
|  | sdata->control_port_protocol = cpu_to_be16(ETH_P_PAE); | 
|  | sdata->control_port_no_encrypt = false; | 
|  |  | 
|  | /* only monitor differs */ | 
|  | sdata->dev->type = ARPHRD_ETHER; | 
|  |  | 
|  | skb_queue_head_init(&sdata->skb_queue); | 
|  | INIT_WORK(&sdata->work, ieee80211_iface_work); | 
|  |  | 
|  | switch (type) { | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | type = NL80211_IFTYPE_AP; | 
|  | sdata->vif.type = type; | 
|  | sdata->vif.p2p = true; | 
|  | /* fall through */ | 
|  | case NL80211_IFTYPE_AP: | 
|  | skb_queue_head_init(&sdata->u.ap.ps_bc_buf); | 
|  | INIT_LIST_HEAD(&sdata->u.ap.vlans); | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | type = NL80211_IFTYPE_STATION; | 
|  | sdata->vif.type = type; | 
|  | sdata->vif.p2p = true; | 
|  | /* fall through */ | 
|  | case NL80211_IFTYPE_STATION: | 
|  | ieee80211_sta_setup_sdata(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | ieee80211_ibss_setup_sdata(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | ieee80211_mesh_init_sdata(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP; | 
|  | sdata->dev->netdev_ops = &ieee80211_monitorif_ops; | 
|  | sdata->u.mntr_flags = MONITOR_FLAG_CONTROL | | 
|  | MONITOR_FLAG_OTHER_BSS; | 
|  | break; | 
|  | case NL80211_IFTYPE_WDS: | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | break; | 
|  | case NL80211_IFTYPE_UNSPECIFIED: | 
|  | case NUM_NL80211_IFTYPES: | 
|  | BUG(); | 
|  | break; | 
|  | } | 
|  |  | 
|  | ieee80211_debugfs_add_netdev(sdata); | 
|  | } | 
|  |  | 
|  | static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata, | 
|  | enum nl80211_iftype type) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | int ret, err; | 
|  | enum nl80211_iftype internal_type = type; | 
|  | bool p2p = false; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (!local->ops->change_interface) | 
|  | return -EBUSY; | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | /* | 
|  | * Could maybe also all others here? | 
|  | * Just not sure how that interacts | 
|  | * with the RX/config path e.g. for | 
|  | * mesh. | 
|  | */ | 
|  | break; | 
|  | default: | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | switch (type) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | /* | 
|  | * Could probably support everything | 
|  | * but WDS here (WDS do_open can fail | 
|  | * under memory pressure, which this | 
|  | * code isn't prepared to handle). | 
|  | */ | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | p2p = true; | 
|  | internal_type = NL80211_IFTYPE_STATION; | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | p2p = true; | 
|  | internal_type = NL80211_IFTYPE_AP; | 
|  | break; | 
|  | default: | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | ret = ieee80211_check_concurrent_iface(sdata, internal_type); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ieee80211_do_stop(sdata, false); | 
|  |  | 
|  | ieee80211_teardown_sdata(sdata->dev); | 
|  |  | 
|  | ret = drv_change_interface(local, sdata, internal_type, p2p); | 
|  | if (ret) | 
|  | type = sdata->vif.type; | 
|  |  | 
|  | ieee80211_setup_sdata(sdata, type); | 
|  |  | 
|  | err = ieee80211_do_open(sdata->dev, false); | 
|  | WARN(err, "type change: do_open returned %d", err); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata, | 
|  | enum nl80211_iftype type) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (type == ieee80211_vif_type_p2p(&sdata->vif)) | 
|  | return 0; | 
|  |  | 
|  | /* Setting ad-hoc mode on non-IBSS channel is not supported. */ | 
|  | if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS && | 
|  | type == NL80211_IFTYPE_ADHOC) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (ieee80211_sdata_running(sdata)) { | 
|  | ret = ieee80211_runtime_change_iftype(sdata, type); | 
|  | if (ret) | 
|  | return ret; | 
|  | } else { | 
|  | /* Purge and reset type-dependent state. */ | 
|  | ieee80211_teardown_sdata(sdata->dev); | 
|  | ieee80211_setup_sdata(sdata, type); | 
|  | } | 
|  |  | 
|  | /* reset some values that shouldn't be kept across type changes */ | 
|  | sdata->vif.bss_conf.basic_rates = | 
|  | ieee80211_mandatory_rates(sdata->local, | 
|  | sdata->local->hw.conf.channel->band); | 
|  | sdata->drop_unencrypted = 0; | 
|  | if (type == NL80211_IFTYPE_STATION) | 
|  | sdata->u.mgd.use_4addr = false; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ieee80211_assign_perm_addr(struct ieee80211_local *local, | 
|  | struct net_device *dev, | 
|  | enum nl80211_iftype type) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | u64 mask, start, addr, val, inc; | 
|  | u8 *m; | 
|  | u8 tmp_addr[ETH_ALEN]; | 
|  | int i; | 
|  |  | 
|  | /* default ... something at least */ | 
|  | memcpy(dev->perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN); | 
|  |  | 
|  | if (is_zero_ether_addr(local->hw.wiphy->addr_mask) && | 
|  | local->hw.wiphy->n_addresses <= 1) | 
|  | return; | 
|  |  | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  |  | 
|  | switch (type) { | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | /* doesn't matter */ | 
|  | break; | 
|  | case NL80211_IFTYPE_WDS: | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | /* match up with an AP interface */ | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (sdata->vif.type != NL80211_IFTYPE_AP) | 
|  | continue; | 
|  | memcpy(dev->perm_addr, sdata->vif.addr, ETH_ALEN); | 
|  | break; | 
|  | } | 
|  | /* keep default if no AP interface present */ | 
|  | break; | 
|  | default: | 
|  | /* assign a new address if possible -- try n_addresses first */ | 
|  | for (i = 0; i < local->hw.wiphy->n_addresses; i++) { | 
|  | bool used = false; | 
|  |  | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (memcmp(local->hw.wiphy->addresses[i].addr, | 
|  | sdata->vif.addr, ETH_ALEN) == 0) { | 
|  | used = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!used) { | 
|  | memcpy(dev->perm_addr, | 
|  | local->hw.wiphy->addresses[i].addr, | 
|  | ETH_ALEN); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* try mask if available */ | 
|  | if (is_zero_ether_addr(local->hw.wiphy->addr_mask)) | 
|  | break; | 
|  |  | 
|  | m = local->hw.wiphy->addr_mask; | 
|  | mask =	((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | | 
|  | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | | 
|  | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); | 
|  |  | 
|  | if (__ffs64(mask) + hweight64(mask) != fls64(mask)) { | 
|  | /* not a contiguous mask ... not handled now! */ | 
|  | printk(KERN_DEBUG "not contiguous\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | m = local->hw.wiphy->perm_addr; | 
|  | start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | | 
|  | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | | 
|  | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); | 
|  |  | 
|  | inc = 1ULL<<__ffs64(mask); | 
|  | val = (start & mask); | 
|  | addr = (start & ~mask) | (val & mask); | 
|  | do { | 
|  | bool used = false; | 
|  |  | 
|  | tmp_addr[5] = addr >> 0*8; | 
|  | tmp_addr[4] = addr >> 1*8; | 
|  | tmp_addr[3] = addr >> 2*8; | 
|  | tmp_addr[2] = addr >> 3*8; | 
|  | tmp_addr[1] = addr >> 4*8; | 
|  | tmp_addr[0] = addr >> 5*8; | 
|  |  | 
|  | val += inc; | 
|  |  | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (memcmp(tmp_addr, sdata->vif.addr, | 
|  | ETH_ALEN) == 0) { | 
|  | used = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!used) { | 
|  | memcpy(dev->perm_addr, tmp_addr, ETH_ALEN); | 
|  | break; | 
|  | } | 
|  | addr = (start & ~mask) | (val & mask); | 
|  | } while (addr != start); | 
|  |  | 
|  | break; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | } | 
|  |  | 
|  | int ieee80211_if_add(struct ieee80211_local *local, const char *name, | 
|  | struct net_device **new_dev, enum nl80211_iftype type, | 
|  | struct vif_params *params) | 
|  | { | 
|  | struct net_device *ndev; | 
|  | struct ieee80211_sub_if_data *sdata = NULL; | 
|  | int ret, i; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | ndev = alloc_netdev_mq(sizeof(*sdata) + local->hw.vif_data_size, | 
|  | name, ieee80211_if_setup, local->hw.queues); | 
|  | if (!ndev) | 
|  | return -ENOMEM; | 
|  | dev_net_set(ndev, wiphy_net(local->hw.wiphy)); | 
|  |  | 
|  | ndev->needed_headroom = local->tx_headroom + | 
|  | 4*6 /* four MAC addresses */ | 
|  | + 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */ | 
|  | + 6 /* mesh */ | 
|  | + 8 /* rfc1042/bridge tunnel */ | 
|  | - ETH_HLEN /* ethernet hard_header_len */ | 
|  | + IEEE80211_ENCRYPT_HEADROOM; | 
|  | ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM; | 
|  |  | 
|  | ret = dev_alloc_name(ndev, ndev->name); | 
|  | if (ret < 0) | 
|  | goto fail; | 
|  |  | 
|  | ieee80211_assign_perm_addr(local, ndev, type); | 
|  | memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN); | 
|  | SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy)); | 
|  |  | 
|  | /* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */ | 
|  | sdata = netdev_priv(ndev); | 
|  | ndev->ieee80211_ptr = &sdata->wdev; | 
|  | memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN); | 
|  | memcpy(sdata->name, ndev->name, IFNAMSIZ); | 
|  |  | 
|  | /* initialise type-independent data */ | 
|  | sdata->wdev.wiphy = local->hw.wiphy; | 
|  | sdata->local = local; | 
|  | sdata->dev = ndev; | 
|  | #ifdef CONFIG_INET | 
|  | sdata->arp_filter_state = true; | 
|  | #endif | 
|  |  | 
|  | for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) | 
|  | skb_queue_head_init(&sdata->fragments[i].skb_list); | 
|  |  | 
|  | INIT_LIST_HEAD(&sdata->key_list); | 
|  |  | 
|  | for (i = 0; i < IEEE80211_NUM_BANDS; i++) { | 
|  | struct ieee80211_supported_band *sband; | 
|  | sband = local->hw.wiphy->bands[i]; | 
|  | sdata->rc_rateidx_mask[i] = | 
|  | sband ? (1 << sband->n_bitrates) - 1 : 0; | 
|  | } | 
|  |  | 
|  | /* setup type-dependent data */ | 
|  | ieee80211_setup_sdata(sdata, type); | 
|  |  | 
|  | if (params) { | 
|  | ndev->ieee80211_ptr->use_4addr = params->use_4addr; | 
|  | if (type == NL80211_IFTYPE_STATION) | 
|  | sdata->u.mgd.use_4addr = params->use_4addr; | 
|  | } | 
|  |  | 
|  | ret = register_netdevice(ndev); | 
|  | if (ret) | 
|  | goto fail; | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | list_add_tail_rcu(&sdata->list, &local->interfaces); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  |  | 
|  | if (new_dev) | 
|  | *new_dev = ndev; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | free_netdev(ndev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | mutex_lock(&sdata->local->iflist_mtx); | 
|  | list_del_rcu(&sdata->list); | 
|  | mutex_unlock(&sdata->local->iflist_mtx); | 
|  |  | 
|  | synchronize_rcu(); | 
|  | unregister_netdevice(sdata->dev); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Remove all interfaces, may only be called at hardware unregistration | 
|  | * time because it doesn't do RCU-safe list removals. | 
|  | */ | 
|  | void ieee80211_remove_interfaces(struct ieee80211_local *local) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata, *tmp; | 
|  | LIST_HEAD(unreg_list); | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) { | 
|  | list_del(&sdata->list); | 
|  |  | 
|  | unregister_netdevice_queue(sdata->dev, &unreg_list); | 
|  | } | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | unregister_netdevice_many(&unreg_list); | 
|  | list_del(&unreg_list); | 
|  | } | 
|  |  | 
|  | static u32 ieee80211_idle_off(struct ieee80211_local *local, | 
|  | const char *reason) | 
|  | { | 
|  | if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE)) | 
|  | return 0; | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | wiphy_debug(local->hw.wiphy, "device no longer idle - %s\n", reason); | 
|  | #endif | 
|  |  | 
|  | local->hw.conf.flags &= ~IEEE80211_CONF_IDLE; | 
|  | return IEEE80211_CONF_CHANGE_IDLE; | 
|  | } | 
|  |  | 
|  | static u32 ieee80211_idle_on(struct ieee80211_local *local) | 
|  | { | 
|  | if (local->hw.conf.flags & IEEE80211_CONF_IDLE) | 
|  | return 0; | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | wiphy_debug(local->hw.wiphy, "device now idle\n"); | 
|  | #endif | 
|  |  | 
|  | drv_flush(local, false); | 
|  |  | 
|  | local->hw.conf.flags |= IEEE80211_CONF_IDLE; | 
|  | return IEEE80211_CONF_CHANGE_IDLE; | 
|  | } | 
|  |  | 
|  | u32 __ieee80211_recalc_idle(struct ieee80211_local *local) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | int count = 0; | 
|  | bool working = false, scanning = false, hw_roc = false; | 
|  | struct ieee80211_work *wk; | 
|  | unsigned int led_trig_start = 0, led_trig_stop = 0; | 
|  |  | 
|  | #ifdef CONFIG_PROVE_LOCKING | 
|  | WARN_ON(debug_locks && !lockdep_rtnl_is_held() && | 
|  | !lockdep_is_held(&local->iflist_mtx)); | 
|  | #endif | 
|  | lockdep_assert_held(&local->mtx); | 
|  |  | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (!ieee80211_sdata_running(sdata)) { | 
|  | sdata->vif.bss_conf.idle = true; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | sdata->old_idle = sdata->vif.bss_conf.idle; | 
|  |  | 
|  | /* do not count disabled managed interfaces */ | 
|  | if (sdata->vif.type == NL80211_IFTYPE_STATION && | 
|  | !sdata->u.mgd.associated) { | 
|  | sdata->vif.bss_conf.idle = true; | 
|  | continue; | 
|  | } | 
|  | /* do not count unused IBSS interfaces */ | 
|  | if (sdata->vif.type == NL80211_IFTYPE_ADHOC && | 
|  | !sdata->u.ibss.ssid_len) { | 
|  | sdata->vif.bss_conf.idle = true; | 
|  | continue; | 
|  | } | 
|  | /* count everything else */ | 
|  | count++; | 
|  | } | 
|  |  | 
|  | list_for_each_entry(wk, &local->work_list, list) { | 
|  | working = true; | 
|  | wk->sdata->vif.bss_conf.idle = false; | 
|  | } | 
|  |  | 
|  | if (local->scan_sdata) { | 
|  | scanning = true; | 
|  | local->scan_sdata->vif.bss_conf.idle = false; | 
|  | } | 
|  |  | 
|  | if (local->hw_roc_channel) | 
|  | hw_roc = true; | 
|  |  | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (sdata->old_idle == sdata->vif.bss_conf.idle) | 
|  | continue; | 
|  | if (!ieee80211_sdata_running(sdata)) | 
|  | continue; | 
|  | ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); | 
|  | } | 
|  |  | 
|  | if (working || scanning || hw_roc) | 
|  | led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK; | 
|  | else | 
|  | led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK; | 
|  |  | 
|  | if (count) | 
|  | led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; | 
|  | else | 
|  | led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; | 
|  |  | 
|  | ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop); | 
|  |  | 
|  | if (hw_roc) | 
|  | return ieee80211_idle_off(local, "hw remain-on-channel"); | 
|  | if (working) | 
|  | return ieee80211_idle_off(local, "working"); | 
|  | if (scanning) | 
|  | return ieee80211_idle_off(local, "scanning"); | 
|  | if (!count) | 
|  | return ieee80211_idle_on(local); | 
|  | else | 
|  | return ieee80211_idle_off(local, "in use"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void ieee80211_recalc_idle(struct ieee80211_local *local) | 
|  | { | 
|  | u32 chg; | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | chg = __ieee80211_recalc_idle(local); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | if (chg) | 
|  | ieee80211_hw_config(local, chg); | 
|  | } | 
|  |  | 
|  | static int netdev_notify(struct notifier_block *nb, | 
|  | unsigned long state, | 
|  | void *ndev) | 
|  | { | 
|  | struct net_device *dev = ndev; | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  |  | 
|  | if (state != NETDEV_CHANGENAME) | 
|  | return 0; | 
|  |  | 
|  | if (!dev->ieee80211_ptr || !dev->ieee80211_ptr->wiphy) | 
|  | return 0; | 
|  |  | 
|  | if (dev->ieee80211_ptr->wiphy->privid != mac80211_wiphy_privid) | 
|  | return 0; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | memcpy(sdata->name, dev->name, IFNAMSIZ); | 
|  |  | 
|  | ieee80211_debugfs_rename_netdev(sdata); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct notifier_block mac80211_netdev_notifier = { | 
|  | .notifier_call = netdev_notify, | 
|  | }; | 
|  |  | 
|  | int ieee80211_iface_init(void) | 
|  | { | 
|  | return register_netdevice_notifier(&mac80211_netdev_notifier); | 
|  | } | 
|  |  | 
|  | void ieee80211_iface_exit(void) | 
|  | { | 
|  | unregister_netdevice_notifier(&mac80211_netdev_notifier); | 
|  | } |