|  | /* | 
|  | * Copyright (c) 2000-2006 Silicon Graphics, Inc. | 
|  | * All Rights Reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it would be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write the Free Software Foundation, | 
|  | * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA | 
|  | */ | 
|  | #include <linux/log2.h> | 
|  |  | 
|  | #include "xfs.h" | 
|  | #include "xfs_fs.h" | 
|  | #include "xfs_types.h" | 
|  | #include "xfs_bit.h" | 
|  | #include "xfs_log.h" | 
|  | #include "xfs_inum.h" | 
|  | #include "xfs_trans.h" | 
|  | #include "xfs_trans_priv.h" | 
|  | #include "xfs_sb.h" | 
|  | #include "xfs_ag.h" | 
|  | #include "xfs_mount.h" | 
|  | #include "xfs_bmap_btree.h" | 
|  | #include "xfs_alloc_btree.h" | 
|  | #include "xfs_ialloc_btree.h" | 
|  | #include "xfs_attr_sf.h" | 
|  | #include "xfs_dinode.h" | 
|  | #include "xfs_inode.h" | 
|  | #include "xfs_buf_item.h" | 
|  | #include "xfs_inode_item.h" | 
|  | #include "xfs_btree.h" | 
|  | #include "xfs_btree_trace.h" | 
|  | #include "xfs_alloc.h" | 
|  | #include "xfs_ialloc.h" | 
|  | #include "xfs_bmap.h" | 
|  | #include "xfs_error.h" | 
|  | #include "xfs_utils.h" | 
|  | #include "xfs_quota.h" | 
|  | #include "xfs_filestream.h" | 
|  | #include "xfs_vnodeops.h" | 
|  | #include "xfs_trace.h" | 
|  |  | 
|  | kmem_zone_t *xfs_ifork_zone; | 
|  | kmem_zone_t *xfs_inode_zone; | 
|  |  | 
|  | /* | 
|  | * Used in xfs_itruncate().  This is the maximum number of extents | 
|  | * freed from a file in a single transaction. | 
|  | */ | 
|  | #define	XFS_ITRUNC_MAX_EXTENTS	2 | 
|  |  | 
|  | STATIC int xfs_iflush_int(xfs_inode_t *, xfs_buf_t *); | 
|  | STATIC int xfs_iformat_local(xfs_inode_t *, xfs_dinode_t *, int, int); | 
|  | STATIC int xfs_iformat_extents(xfs_inode_t *, xfs_dinode_t *, int); | 
|  | STATIC int xfs_iformat_btree(xfs_inode_t *, xfs_dinode_t *, int); | 
|  |  | 
|  | #ifdef DEBUG | 
|  | /* | 
|  | * Make sure that the extents in the given memory buffer | 
|  | * are valid. | 
|  | */ | 
|  | STATIC void | 
|  | xfs_validate_extents( | 
|  | xfs_ifork_t		*ifp, | 
|  | int			nrecs, | 
|  | xfs_exntfmt_t		fmt) | 
|  | { | 
|  | xfs_bmbt_irec_t		irec; | 
|  | xfs_bmbt_rec_host_t	rec; | 
|  | int			i; | 
|  |  | 
|  | for (i = 0; i < nrecs; i++) { | 
|  | xfs_bmbt_rec_host_t *ep = xfs_iext_get_ext(ifp, i); | 
|  | rec.l0 = get_unaligned(&ep->l0); | 
|  | rec.l1 = get_unaligned(&ep->l1); | 
|  | xfs_bmbt_get_all(&rec, &irec); | 
|  | if (fmt == XFS_EXTFMT_NOSTATE) | 
|  | ASSERT(irec.br_state == XFS_EXT_NORM); | 
|  | } | 
|  | } | 
|  | #else /* DEBUG */ | 
|  | #define xfs_validate_extents(ifp, nrecs, fmt) | 
|  | #endif /* DEBUG */ | 
|  |  | 
|  | /* | 
|  | * Check that none of the inode's in the buffer have a next | 
|  | * unlinked field of 0. | 
|  | */ | 
|  | #if defined(DEBUG) | 
|  | void | 
|  | xfs_inobp_check( | 
|  | xfs_mount_t	*mp, | 
|  | xfs_buf_t	*bp) | 
|  | { | 
|  | int		i; | 
|  | int		j; | 
|  | xfs_dinode_t	*dip; | 
|  |  | 
|  | j = mp->m_inode_cluster_size >> mp->m_sb.sb_inodelog; | 
|  |  | 
|  | for (i = 0; i < j; i++) { | 
|  | dip = (xfs_dinode_t *)xfs_buf_offset(bp, | 
|  | i * mp->m_sb.sb_inodesize); | 
|  | if (!dip->di_next_unlinked)  { | 
|  | xfs_alert(mp, | 
|  | "Detected bogus zero next_unlinked field in incore inode buffer 0x%p.", | 
|  | bp); | 
|  | ASSERT(dip->di_next_unlinked); | 
|  | } | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Find the buffer associated with the given inode map | 
|  | * We do basic validation checks on the buffer once it has been | 
|  | * retrieved from disk. | 
|  | */ | 
|  | STATIC int | 
|  | xfs_imap_to_bp( | 
|  | xfs_mount_t	*mp, | 
|  | xfs_trans_t	*tp, | 
|  | struct xfs_imap	*imap, | 
|  | xfs_buf_t	**bpp, | 
|  | uint		buf_flags, | 
|  | uint		iget_flags) | 
|  | { | 
|  | int		error; | 
|  | int		i; | 
|  | int		ni; | 
|  | xfs_buf_t	*bp; | 
|  |  | 
|  | error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp, imap->im_blkno, | 
|  | (int)imap->im_len, buf_flags, &bp); | 
|  | if (error) { | 
|  | if (error != EAGAIN) { | 
|  | xfs_warn(mp, | 
|  | "%s: xfs_trans_read_buf() returned error %d.", | 
|  | __func__, error); | 
|  | } else { | 
|  | ASSERT(buf_flags & XBF_TRYLOCK); | 
|  | } | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Validate the magic number and version of every inode in the buffer | 
|  | * (if DEBUG kernel) or the first inode in the buffer, otherwise. | 
|  | */ | 
|  | #ifdef DEBUG | 
|  | ni = BBTOB(imap->im_len) >> mp->m_sb.sb_inodelog; | 
|  | #else	/* usual case */ | 
|  | ni = 1; | 
|  | #endif | 
|  |  | 
|  | for (i = 0; i < ni; i++) { | 
|  | int		di_ok; | 
|  | xfs_dinode_t	*dip; | 
|  |  | 
|  | dip = (xfs_dinode_t *)xfs_buf_offset(bp, | 
|  | (i << mp->m_sb.sb_inodelog)); | 
|  | di_ok = be16_to_cpu(dip->di_magic) == XFS_DINODE_MAGIC && | 
|  | XFS_DINODE_GOOD_VERSION(dip->di_version); | 
|  | if (unlikely(XFS_TEST_ERROR(!di_ok, mp, | 
|  | XFS_ERRTAG_ITOBP_INOTOBP, | 
|  | XFS_RANDOM_ITOBP_INOTOBP))) { | 
|  | if (iget_flags & XFS_IGET_UNTRUSTED) { | 
|  | xfs_trans_brelse(tp, bp); | 
|  | return XFS_ERROR(EINVAL); | 
|  | } | 
|  | XFS_CORRUPTION_ERROR("xfs_imap_to_bp", | 
|  | XFS_ERRLEVEL_HIGH, mp, dip); | 
|  | #ifdef DEBUG | 
|  | xfs_emerg(mp, | 
|  | "bad inode magic/vsn daddr %lld #%d (magic=%x)", | 
|  | (unsigned long long)imap->im_blkno, i, | 
|  | be16_to_cpu(dip->di_magic)); | 
|  | ASSERT(0); | 
|  | #endif | 
|  | xfs_trans_brelse(tp, bp); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  | } | 
|  |  | 
|  | xfs_inobp_check(mp, bp); | 
|  |  | 
|  | /* | 
|  | * Mark the buffer as an inode buffer now that it looks good | 
|  | */ | 
|  | XFS_BUF_SET_VTYPE(bp, B_FS_INO); | 
|  |  | 
|  | *bpp = bp; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This routine is called to map an inode number within a file | 
|  | * system to the buffer containing the on-disk version of the | 
|  | * inode.  It returns a pointer to the buffer containing the | 
|  | * on-disk inode in the bpp parameter, and in the dip parameter | 
|  | * it returns a pointer to the on-disk inode within that buffer. | 
|  | * | 
|  | * If a non-zero error is returned, then the contents of bpp and | 
|  | * dipp are undefined. | 
|  | * | 
|  | * Use xfs_imap() to determine the size and location of the | 
|  | * buffer to read from disk. | 
|  | */ | 
|  | int | 
|  | xfs_inotobp( | 
|  | xfs_mount_t	*mp, | 
|  | xfs_trans_t	*tp, | 
|  | xfs_ino_t	ino, | 
|  | xfs_dinode_t	**dipp, | 
|  | xfs_buf_t	**bpp, | 
|  | int		*offset, | 
|  | uint		imap_flags) | 
|  | { | 
|  | struct xfs_imap	imap; | 
|  | xfs_buf_t	*bp; | 
|  | int		error; | 
|  |  | 
|  | imap.im_blkno = 0; | 
|  | error = xfs_imap(mp, tp, ino, &imap, imap_flags); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | error = xfs_imap_to_bp(mp, tp, &imap, &bp, XBF_LOCK, imap_flags); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | *dipp = (xfs_dinode_t *)xfs_buf_offset(bp, imap.im_boffset); | 
|  | *bpp = bp; | 
|  | *offset = imap.im_boffset; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * This routine is called to map an inode to the buffer containing | 
|  | * the on-disk version of the inode.  It returns a pointer to the | 
|  | * buffer containing the on-disk inode in the bpp parameter, and in | 
|  | * the dip parameter it returns a pointer to the on-disk inode within | 
|  | * that buffer. | 
|  | * | 
|  | * If a non-zero error is returned, then the contents of bpp and | 
|  | * dipp are undefined. | 
|  | * | 
|  | * The inode is expected to already been mapped to its buffer and read | 
|  | * in once, thus we can use the mapping information stored in the inode | 
|  | * rather than calling xfs_imap().  This allows us to avoid the overhead | 
|  | * of looking at the inode btree for small block file systems | 
|  | * (see xfs_imap()). | 
|  | */ | 
|  | int | 
|  | xfs_itobp( | 
|  | xfs_mount_t	*mp, | 
|  | xfs_trans_t	*tp, | 
|  | xfs_inode_t	*ip, | 
|  | xfs_dinode_t	**dipp, | 
|  | xfs_buf_t	**bpp, | 
|  | uint		buf_flags) | 
|  | { | 
|  | xfs_buf_t	*bp; | 
|  | int		error; | 
|  |  | 
|  | ASSERT(ip->i_imap.im_blkno != 0); | 
|  |  | 
|  | error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &bp, buf_flags, 0); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | if (!bp) { | 
|  | ASSERT(buf_flags & XBF_TRYLOCK); | 
|  | ASSERT(tp == NULL); | 
|  | *bpp = NULL; | 
|  | return EAGAIN; | 
|  | } | 
|  |  | 
|  | *dipp = (xfs_dinode_t *)xfs_buf_offset(bp, ip->i_imap.im_boffset); | 
|  | *bpp = bp; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Move inode type and inode format specific information from the | 
|  | * on-disk inode to the in-core inode.  For fifos, devs, and sockets | 
|  | * this means set if_rdev to the proper value.  For files, directories, | 
|  | * and symlinks this means to bring in the in-line data or extent | 
|  | * pointers.  For a file in B-tree format, only the root is immediately | 
|  | * brought in-core.  The rest will be in-lined in if_extents when it | 
|  | * is first referenced (see xfs_iread_extents()). | 
|  | */ | 
|  | STATIC int | 
|  | xfs_iformat( | 
|  | xfs_inode_t		*ip, | 
|  | xfs_dinode_t		*dip) | 
|  | { | 
|  | xfs_attr_shortform_t	*atp; | 
|  | int			size; | 
|  | int			error; | 
|  | xfs_fsize_t             di_size; | 
|  | ip->i_df.if_ext_max = | 
|  | XFS_IFORK_DSIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t); | 
|  | error = 0; | 
|  |  | 
|  | if (unlikely(be32_to_cpu(dip->di_nextents) + | 
|  | be16_to_cpu(dip->di_anextents) > | 
|  | be64_to_cpu(dip->di_nblocks))) { | 
|  | xfs_warn(ip->i_mount, | 
|  | "corrupt dinode %Lu, extent total = %d, nblocks = %Lu.", | 
|  | (unsigned long long)ip->i_ino, | 
|  | (int)(be32_to_cpu(dip->di_nextents) + | 
|  | be16_to_cpu(dip->di_anextents)), | 
|  | (unsigned long long) | 
|  | be64_to_cpu(dip->di_nblocks)); | 
|  | XFS_CORRUPTION_ERROR("xfs_iformat(1)", XFS_ERRLEVEL_LOW, | 
|  | ip->i_mount, dip); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  |  | 
|  | if (unlikely(dip->di_forkoff > ip->i_mount->m_sb.sb_inodesize)) { | 
|  | xfs_warn(ip->i_mount, "corrupt dinode %Lu, forkoff = 0x%x.", | 
|  | (unsigned long long)ip->i_ino, | 
|  | dip->di_forkoff); | 
|  | XFS_CORRUPTION_ERROR("xfs_iformat(2)", XFS_ERRLEVEL_LOW, | 
|  | ip->i_mount, dip); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  |  | 
|  | if (unlikely((ip->i_d.di_flags & XFS_DIFLAG_REALTIME) && | 
|  | !ip->i_mount->m_rtdev_targp)) { | 
|  | xfs_warn(ip->i_mount, | 
|  | "corrupt dinode %Lu, has realtime flag set.", | 
|  | ip->i_ino); | 
|  | XFS_CORRUPTION_ERROR("xfs_iformat(realtime)", | 
|  | XFS_ERRLEVEL_LOW, ip->i_mount, dip); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  |  | 
|  | switch (ip->i_d.di_mode & S_IFMT) { | 
|  | case S_IFIFO: | 
|  | case S_IFCHR: | 
|  | case S_IFBLK: | 
|  | case S_IFSOCK: | 
|  | if (unlikely(dip->di_format != XFS_DINODE_FMT_DEV)) { | 
|  | XFS_CORRUPTION_ERROR("xfs_iformat(3)", XFS_ERRLEVEL_LOW, | 
|  | ip->i_mount, dip); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  | ip->i_d.di_size = 0; | 
|  | ip->i_size = 0; | 
|  | ip->i_df.if_u2.if_rdev = xfs_dinode_get_rdev(dip); | 
|  | break; | 
|  |  | 
|  | case S_IFREG: | 
|  | case S_IFLNK: | 
|  | case S_IFDIR: | 
|  | switch (dip->di_format) { | 
|  | case XFS_DINODE_FMT_LOCAL: | 
|  | /* | 
|  | * no local regular files yet | 
|  | */ | 
|  | if (unlikely((be16_to_cpu(dip->di_mode) & S_IFMT) == S_IFREG)) { | 
|  | xfs_warn(ip->i_mount, | 
|  | "corrupt inode %Lu (local format for regular file).", | 
|  | (unsigned long long) ip->i_ino); | 
|  | XFS_CORRUPTION_ERROR("xfs_iformat(4)", | 
|  | XFS_ERRLEVEL_LOW, | 
|  | ip->i_mount, dip); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  |  | 
|  | di_size = be64_to_cpu(dip->di_size); | 
|  | if (unlikely(di_size > XFS_DFORK_DSIZE(dip, ip->i_mount))) { | 
|  | xfs_warn(ip->i_mount, | 
|  | "corrupt inode %Lu (bad size %Ld for local inode).", | 
|  | (unsigned long long) ip->i_ino, | 
|  | (long long) di_size); | 
|  | XFS_CORRUPTION_ERROR("xfs_iformat(5)", | 
|  | XFS_ERRLEVEL_LOW, | 
|  | ip->i_mount, dip); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  |  | 
|  | size = (int)di_size; | 
|  | error = xfs_iformat_local(ip, dip, XFS_DATA_FORK, size); | 
|  | break; | 
|  | case XFS_DINODE_FMT_EXTENTS: | 
|  | error = xfs_iformat_extents(ip, dip, XFS_DATA_FORK); | 
|  | break; | 
|  | case XFS_DINODE_FMT_BTREE: | 
|  | error = xfs_iformat_btree(ip, dip, XFS_DATA_FORK); | 
|  | break; | 
|  | default: | 
|  | XFS_ERROR_REPORT("xfs_iformat(6)", XFS_ERRLEVEL_LOW, | 
|  | ip->i_mount); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | XFS_ERROR_REPORT("xfs_iformat(7)", XFS_ERRLEVEL_LOW, ip->i_mount); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  | if (error) { | 
|  | return error; | 
|  | } | 
|  | if (!XFS_DFORK_Q(dip)) | 
|  | return 0; | 
|  | ASSERT(ip->i_afp == NULL); | 
|  | ip->i_afp = kmem_zone_zalloc(xfs_ifork_zone, KM_SLEEP | KM_NOFS); | 
|  | ip->i_afp->if_ext_max = | 
|  | XFS_IFORK_ASIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t); | 
|  | switch (dip->di_aformat) { | 
|  | case XFS_DINODE_FMT_LOCAL: | 
|  | atp = (xfs_attr_shortform_t *)XFS_DFORK_APTR(dip); | 
|  | size = be16_to_cpu(atp->hdr.totsize); | 
|  |  | 
|  | if (unlikely(size < sizeof(struct xfs_attr_sf_hdr))) { | 
|  | xfs_warn(ip->i_mount, | 
|  | "corrupt inode %Lu (bad attr fork size %Ld).", | 
|  | (unsigned long long) ip->i_ino, | 
|  | (long long) size); | 
|  | XFS_CORRUPTION_ERROR("xfs_iformat(8)", | 
|  | XFS_ERRLEVEL_LOW, | 
|  | ip->i_mount, dip); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  |  | 
|  | error = xfs_iformat_local(ip, dip, XFS_ATTR_FORK, size); | 
|  | break; | 
|  | case XFS_DINODE_FMT_EXTENTS: | 
|  | error = xfs_iformat_extents(ip, dip, XFS_ATTR_FORK); | 
|  | break; | 
|  | case XFS_DINODE_FMT_BTREE: | 
|  | error = xfs_iformat_btree(ip, dip, XFS_ATTR_FORK); | 
|  | break; | 
|  | default: | 
|  | error = XFS_ERROR(EFSCORRUPTED); | 
|  | break; | 
|  | } | 
|  | if (error) { | 
|  | kmem_zone_free(xfs_ifork_zone, ip->i_afp); | 
|  | ip->i_afp = NULL; | 
|  | xfs_idestroy_fork(ip, XFS_DATA_FORK); | 
|  | } | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The file is in-lined in the on-disk inode. | 
|  | * If it fits into if_inline_data, then copy | 
|  | * it there, otherwise allocate a buffer for it | 
|  | * and copy the data there.  Either way, set | 
|  | * if_data to point at the data. | 
|  | * If we allocate a buffer for the data, make | 
|  | * sure that its size is a multiple of 4 and | 
|  | * record the real size in i_real_bytes. | 
|  | */ | 
|  | STATIC int | 
|  | xfs_iformat_local( | 
|  | xfs_inode_t	*ip, | 
|  | xfs_dinode_t	*dip, | 
|  | int		whichfork, | 
|  | int		size) | 
|  | { | 
|  | xfs_ifork_t	*ifp; | 
|  | int		real_size; | 
|  |  | 
|  | /* | 
|  | * If the size is unreasonable, then something | 
|  | * is wrong and we just bail out rather than crash in | 
|  | * kmem_alloc() or memcpy() below. | 
|  | */ | 
|  | if (unlikely(size > XFS_DFORK_SIZE(dip, ip->i_mount, whichfork))) { | 
|  | xfs_warn(ip->i_mount, | 
|  | "corrupt inode %Lu (bad size %d for local fork, size = %d).", | 
|  | (unsigned long long) ip->i_ino, size, | 
|  | XFS_DFORK_SIZE(dip, ip->i_mount, whichfork)); | 
|  | XFS_CORRUPTION_ERROR("xfs_iformat_local", XFS_ERRLEVEL_LOW, | 
|  | ip->i_mount, dip); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  | ifp = XFS_IFORK_PTR(ip, whichfork); | 
|  | real_size = 0; | 
|  | if (size == 0) | 
|  | ifp->if_u1.if_data = NULL; | 
|  | else if (size <= sizeof(ifp->if_u2.if_inline_data)) | 
|  | ifp->if_u1.if_data = ifp->if_u2.if_inline_data; | 
|  | else { | 
|  | real_size = roundup(size, 4); | 
|  | ifp->if_u1.if_data = kmem_alloc(real_size, KM_SLEEP | KM_NOFS); | 
|  | } | 
|  | ifp->if_bytes = size; | 
|  | ifp->if_real_bytes = real_size; | 
|  | if (size) | 
|  | memcpy(ifp->if_u1.if_data, XFS_DFORK_PTR(dip, whichfork), size); | 
|  | ifp->if_flags &= ~XFS_IFEXTENTS; | 
|  | ifp->if_flags |= XFS_IFINLINE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The file consists of a set of extents all | 
|  | * of which fit into the on-disk inode. | 
|  | * If there are few enough extents to fit into | 
|  | * the if_inline_ext, then copy them there. | 
|  | * Otherwise allocate a buffer for them and copy | 
|  | * them into it.  Either way, set if_extents | 
|  | * to point at the extents. | 
|  | */ | 
|  | STATIC int | 
|  | xfs_iformat_extents( | 
|  | xfs_inode_t	*ip, | 
|  | xfs_dinode_t	*dip, | 
|  | int		whichfork) | 
|  | { | 
|  | xfs_bmbt_rec_t	*dp; | 
|  | xfs_ifork_t	*ifp; | 
|  | int		nex; | 
|  | int		size; | 
|  | int		i; | 
|  |  | 
|  | ifp = XFS_IFORK_PTR(ip, whichfork); | 
|  | nex = XFS_DFORK_NEXTENTS(dip, whichfork); | 
|  | size = nex * (uint)sizeof(xfs_bmbt_rec_t); | 
|  |  | 
|  | /* | 
|  | * If the number of extents is unreasonable, then something | 
|  | * is wrong and we just bail out rather than crash in | 
|  | * kmem_alloc() or memcpy() below. | 
|  | */ | 
|  | if (unlikely(size < 0 || size > XFS_DFORK_SIZE(dip, ip->i_mount, whichfork))) { | 
|  | xfs_warn(ip->i_mount, "corrupt inode %Lu ((a)extents = %d).", | 
|  | (unsigned long long) ip->i_ino, nex); | 
|  | XFS_CORRUPTION_ERROR("xfs_iformat_extents(1)", XFS_ERRLEVEL_LOW, | 
|  | ip->i_mount, dip); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  |  | 
|  | ifp->if_real_bytes = 0; | 
|  | if (nex == 0) | 
|  | ifp->if_u1.if_extents = NULL; | 
|  | else if (nex <= XFS_INLINE_EXTS) | 
|  | ifp->if_u1.if_extents = ifp->if_u2.if_inline_ext; | 
|  | else | 
|  | xfs_iext_add(ifp, 0, nex); | 
|  |  | 
|  | ifp->if_bytes = size; | 
|  | if (size) { | 
|  | dp = (xfs_bmbt_rec_t *) XFS_DFORK_PTR(dip, whichfork); | 
|  | xfs_validate_extents(ifp, nex, XFS_EXTFMT_INODE(ip)); | 
|  | for (i = 0; i < nex; i++, dp++) { | 
|  | xfs_bmbt_rec_host_t *ep = xfs_iext_get_ext(ifp, i); | 
|  | ep->l0 = get_unaligned_be64(&dp->l0); | 
|  | ep->l1 = get_unaligned_be64(&dp->l1); | 
|  | } | 
|  | XFS_BMAP_TRACE_EXLIST(ip, nex, whichfork); | 
|  | if (whichfork != XFS_DATA_FORK || | 
|  | XFS_EXTFMT_INODE(ip) == XFS_EXTFMT_NOSTATE) | 
|  | if (unlikely(xfs_check_nostate_extents( | 
|  | ifp, 0, nex))) { | 
|  | XFS_ERROR_REPORT("xfs_iformat_extents(2)", | 
|  | XFS_ERRLEVEL_LOW, | 
|  | ip->i_mount); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  | } | 
|  | ifp->if_flags |= XFS_IFEXTENTS; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The file has too many extents to fit into | 
|  | * the inode, so they are in B-tree format. | 
|  | * Allocate a buffer for the root of the B-tree | 
|  | * and copy the root into it.  The i_extents | 
|  | * field will remain NULL until all of the | 
|  | * extents are read in (when they are needed). | 
|  | */ | 
|  | STATIC int | 
|  | xfs_iformat_btree( | 
|  | xfs_inode_t		*ip, | 
|  | xfs_dinode_t		*dip, | 
|  | int			whichfork) | 
|  | { | 
|  | xfs_bmdr_block_t	*dfp; | 
|  | xfs_ifork_t		*ifp; | 
|  | /* REFERENCED */ | 
|  | int			nrecs; | 
|  | int			size; | 
|  |  | 
|  | ifp = XFS_IFORK_PTR(ip, whichfork); | 
|  | dfp = (xfs_bmdr_block_t *)XFS_DFORK_PTR(dip, whichfork); | 
|  | size = XFS_BMAP_BROOT_SPACE(dfp); | 
|  | nrecs = be16_to_cpu(dfp->bb_numrecs); | 
|  |  | 
|  | /* | 
|  | * blow out if -- fork has less extents than can fit in | 
|  | * fork (fork shouldn't be a btree format), root btree | 
|  | * block has more records than can fit into the fork, | 
|  | * or the number of extents is greater than the number of | 
|  | * blocks. | 
|  | */ | 
|  | if (unlikely(XFS_IFORK_NEXTENTS(ip, whichfork) <= ifp->if_ext_max | 
|  | || XFS_BMDR_SPACE_CALC(nrecs) > | 
|  | XFS_DFORK_SIZE(dip, ip->i_mount, whichfork) | 
|  | || XFS_IFORK_NEXTENTS(ip, whichfork) > ip->i_d.di_nblocks)) { | 
|  | xfs_warn(ip->i_mount, "corrupt inode %Lu (btree).", | 
|  | (unsigned long long) ip->i_ino); | 
|  | XFS_CORRUPTION_ERROR("xfs_iformat_btree", XFS_ERRLEVEL_LOW, | 
|  | ip->i_mount, dip); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  |  | 
|  | ifp->if_broot_bytes = size; | 
|  | ifp->if_broot = kmem_alloc(size, KM_SLEEP | KM_NOFS); | 
|  | ASSERT(ifp->if_broot != NULL); | 
|  | /* | 
|  | * Copy and convert from the on-disk structure | 
|  | * to the in-memory structure. | 
|  | */ | 
|  | xfs_bmdr_to_bmbt(ip->i_mount, dfp, | 
|  | XFS_DFORK_SIZE(dip, ip->i_mount, whichfork), | 
|  | ifp->if_broot, size); | 
|  | ifp->if_flags &= ~XFS_IFEXTENTS; | 
|  | ifp->if_flags |= XFS_IFBROOT; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | STATIC void | 
|  | xfs_dinode_from_disk( | 
|  | xfs_icdinode_t		*to, | 
|  | xfs_dinode_t		*from) | 
|  | { | 
|  | to->di_magic = be16_to_cpu(from->di_magic); | 
|  | to->di_mode = be16_to_cpu(from->di_mode); | 
|  | to->di_version = from ->di_version; | 
|  | to->di_format = from->di_format; | 
|  | to->di_onlink = be16_to_cpu(from->di_onlink); | 
|  | to->di_uid = be32_to_cpu(from->di_uid); | 
|  | to->di_gid = be32_to_cpu(from->di_gid); | 
|  | to->di_nlink = be32_to_cpu(from->di_nlink); | 
|  | to->di_projid_lo = be16_to_cpu(from->di_projid_lo); | 
|  | to->di_projid_hi = be16_to_cpu(from->di_projid_hi); | 
|  | memcpy(to->di_pad, from->di_pad, sizeof(to->di_pad)); | 
|  | to->di_flushiter = be16_to_cpu(from->di_flushiter); | 
|  | to->di_atime.t_sec = be32_to_cpu(from->di_atime.t_sec); | 
|  | to->di_atime.t_nsec = be32_to_cpu(from->di_atime.t_nsec); | 
|  | to->di_mtime.t_sec = be32_to_cpu(from->di_mtime.t_sec); | 
|  | to->di_mtime.t_nsec = be32_to_cpu(from->di_mtime.t_nsec); | 
|  | to->di_ctime.t_sec = be32_to_cpu(from->di_ctime.t_sec); | 
|  | to->di_ctime.t_nsec = be32_to_cpu(from->di_ctime.t_nsec); | 
|  | to->di_size = be64_to_cpu(from->di_size); | 
|  | to->di_nblocks = be64_to_cpu(from->di_nblocks); | 
|  | to->di_extsize = be32_to_cpu(from->di_extsize); | 
|  | to->di_nextents = be32_to_cpu(from->di_nextents); | 
|  | to->di_anextents = be16_to_cpu(from->di_anextents); | 
|  | to->di_forkoff = from->di_forkoff; | 
|  | to->di_aformat	= from->di_aformat; | 
|  | to->di_dmevmask	= be32_to_cpu(from->di_dmevmask); | 
|  | to->di_dmstate	= be16_to_cpu(from->di_dmstate); | 
|  | to->di_flags	= be16_to_cpu(from->di_flags); | 
|  | to->di_gen	= be32_to_cpu(from->di_gen); | 
|  | } | 
|  |  | 
|  | void | 
|  | xfs_dinode_to_disk( | 
|  | xfs_dinode_t		*to, | 
|  | xfs_icdinode_t		*from) | 
|  | { | 
|  | to->di_magic = cpu_to_be16(from->di_magic); | 
|  | to->di_mode = cpu_to_be16(from->di_mode); | 
|  | to->di_version = from ->di_version; | 
|  | to->di_format = from->di_format; | 
|  | to->di_onlink = cpu_to_be16(from->di_onlink); | 
|  | to->di_uid = cpu_to_be32(from->di_uid); | 
|  | to->di_gid = cpu_to_be32(from->di_gid); | 
|  | to->di_nlink = cpu_to_be32(from->di_nlink); | 
|  | to->di_projid_lo = cpu_to_be16(from->di_projid_lo); | 
|  | to->di_projid_hi = cpu_to_be16(from->di_projid_hi); | 
|  | memcpy(to->di_pad, from->di_pad, sizeof(to->di_pad)); | 
|  | to->di_flushiter = cpu_to_be16(from->di_flushiter); | 
|  | to->di_atime.t_sec = cpu_to_be32(from->di_atime.t_sec); | 
|  | to->di_atime.t_nsec = cpu_to_be32(from->di_atime.t_nsec); | 
|  | to->di_mtime.t_sec = cpu_to_be32(from->di_mtime.t_sec); | 
|  | to->di_mtime.t_nsec = cpu_to_be32(from->di_mtime.t_nsec); | 
|  | to->di_ctime.t_sec = cpu_to_be32(from->di_ctime.t_sec); | 
|  | to->di_ctime.t_nsec = cpu_to_be32(from->di_ctime.t_nsec); | 
|  | to->di_size = cpu_to_be64(from->di_size); | 
|  | to->di_nblocks = cpu_to_be64(from->di_nblocks); | 
|  | to->di_extsize = cpu_to_be32(from->di_extsize); | 
|  | to->di_nextents = cpu_to_be32(from->di_nextents); | 
|  | to->di_anextents = cpu_to_be16(from->di_anextents); | 
|  | to->di_forkoff = from->di_forkoff; | 
|  | to->di_aformat = from->di_aformat; | 
|  | to->di_dmevmask = cpu_to_be32(from->di_dmevmask); | 
|  | to->di_dmstate = cpu_to_be16(from->di_dmstate); | 
|  | to->di_flags = cpu_to_be16(from->di_flags); | 
|  | to->di_gen = cpu_to_be32(from->di_gen); | 
|  | } | 
|  |  | 
|  | STATIC uint | 
|  | _xfs_dic2xflags( | 
|  | __uint16_t		di_flags) | 
|  | { | 
|  | uint			flags = 0; | 
|  |  | 
|  | if (di_flags & XFS_DIFLAG_ANY) { | 
|  | if (di_flags & XFS_DIFLAG_REALTIME) | 
|  | flags |= XFS_XFLAG_REALTIME; | 
|  | if (di_flags & XFS_DIFLAG_PREALLOC) | 
|  | flags |= XFS_XFLAG_PREALLOC; | 
|  | if (di_flags & XFS_DIFLAG_IMMUTABLE) | 
|  | flags |= XFS_XFLAG_IMMUTABLE; | 
|  | if (di_flags & XFS_DIFLAG_APPEND) | 
|  | flags |= XFS_XFLAG_APPEND; | 
|  | if (di_flags & XFS_DIFLAG_SYNC) | 
|  | flags |= XFS_XFLAG_SYNC; | 
|  | if (di_flags & XFS_DIFLAG_NOATIME) | 
|  | flags |= XFS_XFLAG_NOATIME; | 
|  | if (di_flags & XFS_DIFLAG_NODUMP) | 
|  | flags |= XFS_XFLAG_NODUMP; | 
|  | if (di_flags & XFS_DIFLAG_RTINHERIT) | 
|  | flags |= XFS_XFLAG_RTINHERIT; | 
|  | if (di_flags & XFS_DIFLAG_PROJINHERIT) | 
|  | flags |= XFS_XFLAG_PROJINHERIT; | 
|  | if (di_flags & XFS_DIFLAG_NOSYMLINKS) | 
|  | flags |= XFS_XFLAG_NOSYMLINKS; | 
|  | if (di_flags & XFS_DIFLAG_EXTSIZE) | 
|  | flags |= XFS_XFLAG_EXTSIZE; | 
|  | if (di_flags & XFS_DIFLAG_EXTSZINHERIT) | 
|  | flags |= XFS_XFLAG_EXTSZINHERIT; | 
|  | if (di_flags & XFS_DIFLAG_NODEFRAG) | 
|  | flags |= XFS_XFLAG_NODEFRAG; | 
|  | if (di_flags & XFS_DIFLAG_FILESTREAM) | 
|  | flags |= XFS_XFLAG_FILESTREAM; | 
|  | } | 
|  |  | 
|  | return flags; | 
|  | } | 
|  |  | 
|  | uint | 
|  | xfs_ip2xflags( | 
|  | xfs_inode_t		*ip) | 
|  | { | 
|  | xfs_icdinode_t		*dic = &ip->i_d; | 
|  |  | 
|  | return _xfs_dic2xflags(dic->di_flags) | | 
|  | (XFS_IFORK_Q(ip) ? XFS_XFLAG_HASATTR : 0); | 
|  | } | 
|  |  | 
|  | uint | 
|  | xfs_dic2xflags( | 
|  | xfs_dinode_t		*dip) | 
|  | { | 
|  | return _xfs_dic2xflags(be16_to_cpu(dip->di_flags)) | | 
|  | (XFS_DFORK_Q(dip) ? XFS_XFLAG_HASATTR : 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Read the disk inode attributes into the in-core inode structure. | 
|  | */ | 
|  | int | 
|  | xfs_iread( | 
|  | xfs_mount_t	*mp, | 
|  | xfs_trans_t	*tp, | 
|  | xfs_inode_t	*ip, | 
|  | uint		iget_flags) | 
|  | { | 
|  | xfs_buf_t	*bp; | 
|  | xfs_dinode_t	*dip; | 
|  | int		error; | 
|  |  | 
|  | /* | 
|  | * Fill in the location information in the in-core inode. | 
|  | */ | 
|  | error = xfs_imap(mp, tp, ip->i_ino, &ip->i_imap, iget_flags); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | /* | 
|  | * Get pointers to the on-disk inode and the buffer containing it. | 
|  | */ | 
|  | error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &bp, | 
|  | XBF_LOCK, iget_flags); | 
|  | if (error) | 
|  | return error; | 
|  | dip = (xfs_dinode_t *)xfs_buf_offset(bp, ip->i_imap.im_boffset); | 
|  |  | 
|  | /* | 
|  | * If we got something that isn't an inode it means someone | 
|  | * (nfs or dmi) has a stale handle. | 
|  | */ | 
|  | if (be16_to_cpu(dip->di_magic) != XFS_DINODE_MAGIC) { | 
|  | #ifdef DEBUG | 
|  | xfs_alert(mp, | 
|  | "%s: dip->di_magic (0x%x) != XFS_DINODE_MAGIC (0x%x)", | 
|  | __func__, be16_to_cpu(dip->di_magic), XFS_DINODE_MAGIC); | 
|  | #endif /* DEBUG */ | 
|  | error = XFS_ERROR(EINVAL); | 
|  | goto out_brelse; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the on-disk inode is already linked to a directory | 
|  | * entry, copy all of the inode into the in-core inode. | 
|  | * xfs_iformat() handles copying in the inode format | 
|  | * specific information. | 
|  | * Otherwise, just get the truly permanent information. | 
|  | */ | 
|  | if (dip->di_mode) { | 
|  | xfs_dinode_from_disk(&ip->i_d, dip); | 
|  | error = xfs_iformat(ip, dip); | 
|  | if (error)  { | 
|  | #ifdef DEBUG | 
|  | xfs_alert(mp, "%s: xfs_iformat() returned error %d", | 
|  | __func__, error); | 
|  | #endif /* DEBUG */ | 
|  | goto out_brelse; | 
|  | } | 
|  | } else { | 
|  | ip->i_d.di_magic = be16_to_cpu(dip->di_magic); | 
|  | ip->i_d.di_version = dip->di_version; | 
|  | ip->i_d.di_gen = be32_to_cpu(dip->di_gen); | 
|  | ip->i_d.di_flushiter = be16_to_cpu(dip->di_flushiter); | 
|  | /* | 
|  | * Make sure to pull in the mode here as well in | 
|  | * case the inode is released without being used. | 
|  | * This ensures that xfs_inactive() will see that | 
|  | * the inode is already free and not try to mess | 
|  | * with the uninitialized part of it. | 
|  | */ | 
|  | ip->i_d.di_mode = 0; | 
|  | /* | 
|  | * Initialize the per-fork minima and maxima for a new | 
|  | * inode here.  xfs_iformat will do it for old inodes. | 
|  | */ | 
|  | ip->i_df.if_ext_max = | 
|  | XFS_IFORK_DSIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The inode format changed when we moved the link count and | 
|  | * made it 32 bits long.  If this is an old format inode, | 
|  | * convert it in memory to look like a new one.  If it gets | 
|  | * flushed to disk we will convert back before flushing or | 
|  | * logging it.  We zero out the new projid field and the old link | 
|  | * count field.  We'll handle clearing the pad field (the remains | 
|  | * of the old uuid field) when we actually convert the inode to | 
|  | * the new format. We don't change the version number so that we | 
|  | * can distinguish this from a real new format inode. | 
|  | */ | 
|  | if (ip->i_d.di_version == 1) { | 
|  | ip->i_d.di_nlink = ip->i_d.di_onlink; | 
|  | ip->i_d.di_onlink = 0; | 
|  | xfs_set_projid(ip, 0); | 
|  | } | 
|  |  | 
|  | ip->i_delayed_blks = 0; | 
|  | ip->i_size = ip->i_d.di_size; | 
|  |  | 
|  | /* | 
|  | * Mark the buffer containing the inode as something to keep | 
|  | * around for a while.  This helps to keep recently accessed | 
|  | * meta-data in-core longer. | 
|  | */ | 
|  | xfs_buf_set_ref(bp, XFS_INO_REF); | 
|  |  | 
|  | /* | 
|  | * Use xfs_trans_brelse() to release the buffer containing the | 
|  | * on-disk inode, because it was acquired with xfs_trans_read_buf() | 
|  | * in xfs_itobp() above.  If tp is NULL, this is just a normal | 
|  | * brelse().  If we're within a transaction, then xfs_trans_brelse() | 
|  | * will only release the buffer if it is not dirty within the | 
|  | * transaction.  It will be OK to release the buffer in this case, | 
|  | * because inodes on disk are never destroyed and we will be | 
|  | * locking the new in-core inode before putting it in the hash | 
|  | * table where other processes can find it.  Thus we don't have | 
|  | * to worry about the inode being changed just because we released | 
|  | * the buffer. | 
|  | */ | 
|  | out_brelse: | 
|  | xfs_trans_brelse(tp, bp); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Read in extents from a btree-format inode. | 
|  | * Allocate and fill in if_extents.  Real work is done in xfs_bmap.c. | 
|  | */ | 
|  | int | 
|  | xfs_iread_extents( | 
|  | xfs_trans_t	*tp, | 
|  | xfs_inode_t	*ip, | 
|  | int		whichfork) | 
|  | { | 
|  | int		error; | 
|  | xfs_ifork_t	*ifp; | 
|  | xfs_extnum_t	nextents; | 
|  |  | 
|  | if (unlikely(XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE)) { | 
|  | XFS_ERROR_REPORT("xfs_iread_extents", XFS_ERRLEVEL_LOW, | 
|  | ip->i_mount); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  | nextents = XFS_IFORK_NEXTENTS(ip, whichfork); | 
|  | ifp = XFS_IFORK_PTR(ip, whichfork); | 
|  |  | 
|  | /* | 
|  | * We know that the size is valid (it's checked in iformat_btree) | 
|  | */ | 
|  | ifp->if_bytes = ifp->if_real_bytes = 0; | 
|  | ifp->if_flags |= XFS_IFEXTENTS; | 
|  | xfs_iext_add(ifp, 0, nextents); | 
|  | error = xfs_bmap_read_extents(tp, ip, whichfork); | 
|  | if (error) { | 
|  | xfs_iext_destroy(ifp); | 
|  | ifp->if_flags &= ~XFS_IFEXTENTS; | 
|  | return error; | 
|  | } | 
|  | xfs_validate_extents(ifp, nextents, XFS_EXTFMT_INODE(ip)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allocate an inode on disk and return a copy of its in-core version. | 
|  | * The in-core inode is locked exclusively.  Set mode, nlink, and rdev | 
|  | * appropriately within the inode.  The uid and gid for the inode are | 
|  | * set according to the contents of the given cred structure. | 
|  | * | 
|  | * Use xfs_dialloc() to allocate the on-disk inode. If xfs_dialloc() | 
|  | * has a free inode available, call xfs_iget() | 
|  | * to obtain the in-core version of the allocated inode.  Finally, | 
|  | * fill in the inode and log its initial contents.  In this case, | 
|  | * ialloc_context would be set to NULL and call_again set to false. | 
|  | * | 
|  | * If xfs_dialloc() does not have an available inode, | 
|  | * it will replenish its supply by doing an allocation. Since we can | 
|  | * only do one allocation within a transaction without deadlocks, we | 
|  | * must commit the current transaction before returning the inode itself. | 
|  | * In this case, therefore, we will set call_again to true and return. | 
|  | * The caller should then commit the current transaction, start a new | 
|  | * transaction, and call xfs_ialloc() again to actually get the inode. | 
|  | * | 
|  | * To ensure that some other process does not grab the inode that | 
|  | * was allocated during the first call to xfs_ialloc(), this routine | 
|  | * also returns the [locked] bp pointing to the head of the freelist | 
|  | * as ialloc_context.  The caller should hold this buffer across | 
|  | * the commit and pass it back into this routine on the second call. | 
|  | * | 
|  | * If we are allocating quota inodes, we do not have a parent inode | 
|  | * to attach to or associate with (i.e. pip == NULL) because they | 
|  | * are not linked into the directory structure - they are attached | 
|  | * directly to the superblock - and so have no parent. | 
|  | */ | 
|  | int | 
|  | xfs_ialloc( | 
|  | xfs_trans_t	*tp, | 
|  | xfs_inode_t	*pip, | 
|  | mode_t		mode, | 
|  | xfs_nlink_t	nlink, | 
|  | xfs_dev_t	rdev, | 
|  | prid_t		prid, | 
|  | int		okalloc, | 
|  | xfs_buf_t	**ialloc_context, | 
|  | boolean_t	*call_again, | 
|  | xfs_inode_t	**ipp) | 
|  | { | 
|  | xfs_ino_t	ino; | 
|  | xfs_inode_t	*ip; | 
|  | uint		flags; | 
|  | int		error; | 
|  | timespec_t	tv; | 
|  | int		filestreams = 0; | 
|  |  | 
|  | /* | 
|  | * Call the space management code to pick | 
|  | * the on-disk inode to be allocated. | 
|  | */ | 
|  | error = xfs_dialloc(tp, pip ? pip->i_ino : 0, mode, okalloc, | 
|  | ialloc_context, call_again, &ino); | 
|  | if (error) | 
|  | return error; | 
|  | if (*call_again || ino == NULLFSINO) { | 
|  | *ipp = NULL; | 
|  | return 0; | 
|  | } | 
|  | ASSERT(*ialloc_context == NULL); | 
|  |  | 
|  | /* | 
|  | * Get the in-core inode with the lock held exclusively. | 
|  | * This is because we're setting fields here we need | 
|  | * to prevent others from looking at until we're done. | 
|  | */ | 
|  | error = xfs_iget(tp->t_mountp, tp, ino, XFS_IGET_CREATE, | 
|  | XFS_ILOCK_EXCL, &ip); | 
|  | if (error) | 
|  | return error; | 
|  | ASSERT(ip != NULL); | 
|  |  | 
|  | ip->i_d.di_mode = (__uint16_t)mode; | 
|  | ip->i_d.di_onlink = 0; | 
|  | ip->i_d.di_nlink = nlink; | 
|  | ASSERT(ip->i_d.di_nlink == nlink); | 
|  | ip->i_d.di_uid = current_fsuid(); | 
|  | ip->i_d.di_gid = current_fsgid(); | 
|  | xfs_set_projid(ip, prid); | 
|  | memset(&(ip->i_d.di_pad[0]), 0, sizeof(ip->i_d.di_pad)); | 
|  |  | 
|  | /* | 
|  | * If the superblock version is up to where we support new format | 
|  | * inodes and this is currently an old format inode, then change | 
|  | * the inode version number now.  This way we only do the conversion | 
|  | * here rather than here and in the flush/logging code. | 
|  | */ | 
|  | if (xfs_sb_version_hasnlink(&tp->t_mountp->m_sb) && | 
|  | ip->i_d.di_version == 1) { | 
|  | ip->i_d.di_version = 2; | 
|  | /* | 
|  | * We've already zeroed the old link count, the projid field, | 
|  | * and the pad field. | 
|  | */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Project ids won't be stored on disk if we are using a version 1 inode. | 
|  | */ | 
|  | if ((prid != 0) && (ip->i_d.di_version == 1)) | 
|  | xfs_bump_ino_vers2(tp, ip); | 
|  |  | 
|  | if (pip && XFS_INHERIT_GID(pip)) { | 
|  | ip->i_d.di_gid = pip->i_d.di_gid; | 
|  | if ((pip->i_d.di_mode & S_ISGID) && (mode & S_IFMT) == S_IFDIR) { | 
|  | ip->i_d.di_mode |= S_ISGID; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the group ID of the new file does not match the effective group | 
|  | * ID or one of the supplementary group IDs, the S_ISGID bit is cleared | 
|  | * (and only if the irix_sgid_inherit compatibility variable is set). | 
|  | */ | 
|  | if ((irix_sgid_inherit) && | 
|  | (ip->i_d.di_mode & S_ISGID) && | 
|  | (!in_group_p((gid_t)ip->i_d.di_gid))) { | 
|  | ip->i_d.di_mode &= ~S_ISGID; | 
|  | } | 
|  |  | 
|  | ip->i_d.di_size = 0; | 
|  | ip->i_size = 0; | 
|  | ip->i_d.di_nextents = 0; | 
|  | ASSERT(ip->i_d.di_nblocks == 0); | 
|  |  | 
|  | nanotime(&tv); | 
|  | ip->i_d.di_mtime.t_sec = (__int32_t)tv.tv_sec; | 
|  | ip->i_d.di_mtime.t_nsec = (__int32_t)tv.tv_nsec; | 
|  | ip->i_d.di_atime = ip->i_d.di_mtime; | 
|  | ip->i_d.di_ctime = ip->i_d.di_mtime; | 
|  |  | 
|  | /* | 
|  | * di_gen will have been taken care of in xfs_iread. | 
|  | */ | 
|  | ip->i_d.di_extsize = 0; | 
|  | ip->i_d.di_dmevmask = 0; | 
|  | ip->i_d.di_dmstate = 0; | 
|  | ip->i_d.di_flags = 0; | 
|  | flags = XFS_ILOG_CORE; | 
|  | switch (mode & S_IFMT) { | 
|  | case S_IFIFO: | 
|  | case S_IFCHR: | 
|  | case S_IFBLK: | 
|  | case S_IFSOCK: | 
|  | ip->i_d.di_format = XFS_DINODE_FMT_DEV; | 
|  | ip->i_df.if_u2.if_rdev = rdev; | 
|  | ip->i_df.if_flags = 0; | 
|  | flags |= XFS_ILOG_DEV; | 
|  | break; | 
|  | case S_IFREG: | 
|  | /* | 
|  | * we can't set up filestreams until after the VFS inode | 
|  | * is set up properly. | 
|  | */ | 
|  | if (pip && xfs_inode_is_filestream(pip)) | 
|  | filestreams = 1; | 
|  | /* fall through */ | 
|  | case S_IFDIR: | 
|  | if (pip && (pip->i_d.di_flags & XFS_DIFLAG_ANY)) { | 
|  | uint	di_flags = 0; | 
|  |  | 
|  | if ((mode & S_IFMT) == S_IFDIR) { | 
|  | if (pip->i_d.di_flags & XFS_DIFLAG_RTINHERIT) | 
|  | di_flags |= XFS_DIFLAG_RTINHERIT; | 
|  | if (pip->i_d.di_flags & XFS_DIFLAG_EXTSZINHERIT) { | 
|  | di_flags |= XFS_DIFLAG_EXTSZINHERIT; | 
|  | ip->i_d.di_extsize = pip->i_d.di_extsize; | 
|  | } | 
|  | } else if ((mode & S_IFMT) == S_IFREG) { | 
|  | if (pip->i_d.di_flags & XFS_DIFLAG_RTINHERIT) | 
|  | di_flags |= XFS_DIFLAG_REALTIME; | 
|  | if (pip->i_d.di_flags & XFS_DIFLAG_EXTSZINHERIT) { | 
|  | di_flags |= XFS_DIFLAG_EXTSIZE; | 
|  | ip->i_d.di_extsize = pip->i_d.di_extsize; | 
|  | } | 
|  | } | 
|  | if ((pip->i_d.di_flags & XFS_DIFLAG_NOATIME) && | 
|  | xfs_inherit_noatime) | 
|  | di_flags |= XFS_DIFLAG_NOATIME; | 
|  | if ((pip->i_d.di_flags & XFS_DIFLAG_NODUMP) && | 
|  | xfs_inherit_nodump) | 
|  | di_flags |= XFS_DIFLAG_NODUMP; | 
|  | if ((pip->i_d.di_flags & XFS_DIFLAG_SYNC) && | 
|  | xfs_inherit_sync) | 
|  | di_flags |= XFS_DIFLAG_SYNC; | 
|  | if ((pip->i_d.di_flags & XFS_DIFLAG_NOSYMLINKS) && | 
|  | xfs_inherit_nosymlinks) | 
|  | di_flags |= XFS_DIFLAG_NOSYMLINKS; | 
|  | if (pip->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) | 
|  | di_flags |= XFS_DIFLAG_PROJINHERIT; | 
|  | if ((pip->i_d.di_flags & XFS_DIFLAG_NODEFRAG) && | 
|  | xfs_inherit_nodefrag) | 
|  | di_flags |= XFS_DIFLAG_NODEFRAG; | 
|  | if (pip->i_d.di_flags & XFS_DIFLAG_FILESTREAM) | 
|  | di_flags |= XFS_DIFLAG_FILESTREAM; | 
|  | ip->i_d.di_flags |= di_flags; | 
|  | } | 
|  | /* FALLTHROUGH */ | 
|  | case S_IFLNK: | 
|  | ip->i_d.di_format = XFS_DINODE_FMT_EXTENTS; | 
|  | ip->i_df.if_flags = XFS_IFEXTENTS; | 
|  | ip->i_df.if_bytes = ip->i_df.if_real_bytes = 0; | 
|  | ip->i_df.if_u1.if_extents = NULL; | 
|  | break; | 
|  | default: | 
|  | ASSERT(0); | 
|  | } | 
|  | /* | 
|  | * Attribute fork settings for new inode. | 
|  | */ | 
|  | ip->i_d.di_aformat = XFS_DINODE_FMT_EXTENTS; | 
|  | ip->i_d.di_anextents = 0; | 
|  |  | 
|  | /* | 
|  | * Log the new values stuffed into the inode. | 
|  | */ | 
|  | xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL); | 
|  | xfs_trans_log_inode(tp, ip, flags); | 
|  |  | 
|  | /* now that we have an i_mode we can setup inode ops and unlock */ | 
|  | xfs_setup_inode(ip); | 
|  |  | 
|  | /* now we have set up the vfs inode we can associate the filestream */ | 
|  | if (filestreams) { | 
|  | error = xfs_filestream_associate(pip, ip); | 
|  | if (error < 0) | 
|  | return -error; | 
|  | if (!error) | 
|  | xfs_iflags_set(ip, XFS_IFILESTREAM); | 
|  | } | 
|  |  | 
|  | *ipp = ip; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check to make sure that there are no blocks allocated to the | 
|  | * file beyond the size of the file.  We don't check this for | 
|  | * files with fixed size extents or real time extents, but we | 
|  | * at least do it for regular files. | 
|  | */ | 
|  | #ifdef DEBUG | 
|  | void | 
|  | xfs_isize_check( | 
|  | xfs_mount_t	*mp, | 
|  | xfs_inode_t	*ip, | 
|  | xfs_fsize_t	isize) | 
|  | { | 
|  | xfs_fileoff_t	map_first; | 
|  | int		nimaps; | 
|  | xfs_bmbt_irec_t	imaps[2]; | 
|  |  | 
|  | if ((ip->i_d.di_mode & S_IFMT) != S_IFREG) | 
|  | return; | 
|  |  | 
|  | if (XFS_IS_REALTIME_INODE(ip)) | 
|  | return; | 
|  |  | 
|  | if (ip->i_d.di_flags & XFS_DIFLAG_EXTSIZE) | 
|  | return; | 
|  |  | 
|  | nimaps = 2; | 
|  | map_first = XFS_B_TO_FSB(mp, (xfs_ufsize_t)isize); | 
|  | /* | 
|  | * The filesystem could be shutting down, so bmapi may return | 
|  | * an error. | 
|  | */ | 
|  | if (xfs_bmapi(NULL, ip, map_first, | 
|  | (XFS_B_TO_FSB(mp, | 
|  | (xfs_ufsize_t)XFS_MAXIOFFSET(mp)) - | 
|  | map_first), | 
|  | XFS_BMAPI_ENTIRE, NULL, 0, imaps, &nimaps, | 
|  | NULL)) | 
|  | return; | 
|  | ASSERT(nimaps == 1); | 
|  | ASSERT(imaps[0].br_startblock == HOLESTARTBLOCK); | 
|  | } | 
|  | #endif	/* DEBUG */ | 
|  |  | 
|  | /* | 
|  | * Calculate the last possible buffered byte in a file.  This must | 
|  | * include data that was buffered beyond the EOF by the write code. | 
|  | * This also needs to deal with overflowing the xfs_fsize_t type | 
|  | * which can happen for sizes near the limit. | 
|  | * | 
|  | * We also need to take into account any blocks beyond the EOF.  It | 
|  | * may be the case that they were buffered by a write which failed. | 
|  | * In that case the pages will still be in memory, but the inode size | 
|  | * will never have been updated. | 
|  | */ | 
|  | STATIC xfs_fsize_t | 
|  | xfs_file_last_byte( | 
|  | xfs_inode_t	*ip) | 
|  | { | 
|  | xfs_mount_t	*mp; | 
|  | xfs_fsize_t	last_byte; | 
|  | xfs_fileoff_t	last_block; | 
|  | xfs_fileoff_t	size_last_block; | 
|  | int		error; | 
|  |  | 
|  | ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL|XFS_IOLOCK_SHARED)); | 
|  |  | 
|  | mp = ip->i_mount; | 
|  | /* | 
|  | * Only check for blocks beyond the EOF if the extents have | 
|  | * been read in.  This eliminates the need for the inode lock, | 
|  | * and it also saves us from looking when it really isn't | 
|  | * necessary. | 
|  | */ | 
|  | if (ip->i_df.if_flags & XFS_IFEXTENTS) { | 
|  | xfs_ilock(ip, XFS_ILOCK_SHARED); | 
|  | error = xfs_bmap_last_offset(NULL, ip, &last_block, | 
|  | XFS_DATA_FORK); | 
|  | xfs_iunlock(ip, XFS_ILOCK_SHARED); | 
|  | if (error) { | 
|  | last_block = 0; | 
|  | } | 
|  | } else { | 
|  | last_block = 0; | 
|  | } | 
|  | size_last_block = XFS_B_TO_FSB(mp, (xfs_ufsize_t)ip->i_size); | 
|  | last_block = XFS_FILEOFF_MAX(last_block, size_last_block); | 
|  |  | 
|  | last_byte = XFS_FSB_TO_B(mp, last_block); | 
|  | if (last_byte < 0) { | 
|  | return XFS_MAXIOFFSET(mp); | 
|  | } | 
|  | last_byte += (1 << mp->m_writeio_log); | 
|  | if (last_byte < 0) { | 
|  | return XFS_MAXIOFFSET(mp); | 
|  | } | 
|  | return last_byte; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Start the truncation of the file to new_size.  The new size | 
|  | * must be smaller than the current size.  This routine will | 
|  | * clear the buffer and page caches of file data in the removed | 
|  | * range, and xfs_itruncate_finish() will remove the underlying | 
|  | * disk blocks. | 
|  | * | 
|  | * The inode must have its I/O lock locked EXCLUSIVELY, and it | 
|  | * must NOT have the inode lock held at all.  This is because we're | 
|  | * calling into the buffer/page cache code and we can't hold the | 
|  | * inode lock when we do so. | 
|  | * | 
|  | * We need to wait for any direct I/Os in flight to complete before we | 
|  | * proceed with the truncate. This is needed to prevent the extents | 
|  | * being read or written by the direct I/Os from being removed while the | 
|  | * I/O is in flight as there is no other method of synchronising | 
|  | * direct I/O with the truncate operation.  Also, because we hold | 
|  | * the IOLOCK in exclusive mode, we prevent new direct I/Os from being | 
|  | * started until the truncate completes and drops the lock. Essentially, | 
|  | * the xfs_ioend_wait() call forms an I/O barrier that provides strict | 
|  | * ordering between direct I/Os and the truncate operation. | 
|  | * | 
|  | * The flags parameter can have either the value XFS_ITRUNC_DEFINITE | 
|  | * or XFS_ITRUNC_MAYBE.  The XFS_ITRUNC_MAYBE value should be used | 
|  | * in the case that the caller is locking things out of order and | 
|  | * may not be able to call xfs_itruncate_finish() with the inode lock | 
|  | * held without dropping the I/O lock.  If the caller must drop the | 
|  | * I/O lock before calling xfs_itruncate_finish(), then xfs_itruncate_start() | 
|  | * must be called again with all the same restrictions as the initial | 
|  | * call. | 
|  | */ | 
|  | int | 
|  | xfs_itruncate_start( | 
|  | xfs_inode_t	*ip, | 
|  | uint		flags, | 
|  | xfs_fsize_t	new_size) | 
|  | { | 
|  | xfs_fsize_t	last_byte; | 
|  | xfs_off_t	toss_start; | 
|  | xfs_mount_t	*mp; | 
|  | int		error = 0; | 
|  |  | 
|  | ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL)); | 
|  | ASSERT((new_size == 0) || (new_size <= ip->i_size)); | 
|  | ASSERT((flags == XFS_ITRUNC_DEFINITE) || | 
|  | (flags == XFS_ITRUNC_MAYBE)); | 
|  |  | 
|  | mp = ip->i_mount; | 
|  |  | 
|  | /* wait for the completion of any pending DIOs */ | 
|  | if (new_size == 0 || new_size < ip->i_size) | 
|  | xfs_ioend_wait(ip); | 
|  |  | 
|  | /* | 
|  | * Call toss_pages or flushinval_pages to get rid of pages | 
|  | * overlapping the region being removed.  We have to use | 
|  | * the less efficient flushinval_pages in the case that the | 
|  | * caller may not be able to finish the truncate without | 
|  | * dropping the inode's I/O lock.  Make sure | 
|  | * to catch any pages brought in by buffers overlapping | 
|  | * the EOF by searching out beyond the isize by our | 
|  | * block size. We round new_size up to a block boundary | 
|  | * so that we don't toss things on the same block as | 
|  | * new_size but before it. | 
|  | * | 
|  | * Before calling toss_page or flushinval_pages, make sure to | 
|  | * call remapf() over the same region if the file is mapped. | 
|  | * This frees up mapped file references to the pages in the | 
|  | * given range and for the flushinval_pages case it ensures | 
|  | * that we get the latest mapped changes flushed out. | 
|  | */ | 
|  | toss_start = XFS_B_TO_FSB(mp, (xfs_ufsize_t)new_size); | 
|  | toss_start = XFS_FSB_TO_B(mp, toss_start); | 
|  | if (toss_start < 0) { | 
|  | /* | 
|  | * The place to start tossing is beyond our maximum | 
|  | * file size, so there is no way that the data extended | 
|  | * out there. | 
|  | */ | 
|  | return 0; | 
|  | } | 
|  | last_byte = xfs_file_last_byte(ip); | 
|  | trace_xfs_itruncate_start(ip, new_size, flags, toss_start, last_byte); | 
|  | if (last_byte > toss_start) { | 
|  | if (flags & XFS_ITRUNC_DEFINITE) { | 
|  | xfs_tosspages(ip, toss_start, | 
|  | -1, FI_REMAPF_LOCKED); | 
|  | } else { | 
|  | error = xfs_flushinval_pages(ip, toss_start, | 
|  | -1, FI_REMAPF_LOCKED); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef DEBUG | 
|  | if (new_size == 0) { | 
|  | ASSERT(VN_CACHED(VFS_I(ip)) == 0); | 
|  | } | 
|  | #endif | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Shrink the file to the given new_size.  The new size must be smaller than | 
|  | * the current size.  This will free up the underlying blocks in the removed | 
|  | * range after a call to xfs_itruncate_start() or xfs_atruncate_start(). | 
|  | * | 
|  | * The transaction passed to this routine must have made a permanent log | 
|  | * reservation of at least XFS_ITRUNCATE_LOG_RES.  This routine may commit the | 
|  | * given transaction and start new ones, so make sure everything involved in | 
|  | * the transaction is tidy before calling here.  Some transaction will be | 
|  | * returned to the caller to be committed.  The incoming transaction must | 
|  | * already include the inode, and both inode locks must be held exclusively. | 
|  | * The inode must also be "held" within the transaction.  On return the inode | 
|  | * will be "held" within the returned transaction.  This routine does NOT | 
|  | * require any disk space to be reserved for it within the transaction. | 
|  | * | 
|  | * The fork parameter must be either xfs_attr_fork or xfs_data_fork, and it | 
|  | * indicates the fork which is to be truncated.  For the attribute fork we only | 
|  | * support truncation to size 0. | 
|  | * | 
|  | * We use the sync parameter to indicate whether or not the first transaction | 
|  | * we perform might have to be synchronous.  For the attr fork, it needs to be | 
|  | * so if the unlink of the inode is not yet known to be permanent in the log. | 
|  | * This keeps us from freeing and reusing the blocks of the attribute fork | 
|  | * before the unlink of the inode becomes permanent. | 
|  | * | 
|  | * For the data fork, we normally have to run synchronously if we're being | 
|  | * called out of the inactive path or we're being called out of the create path | 
|  | * where we're truncating an existing file.  Either way, the truncate needs to | 
|  | * be sync so blocks don't reappear in the file with altered data in case of a | 
|  | * crash.  wsync filesystems can run the first case async because anything that | 
|  | * shrinks the inode has to run sync so by the time we're called here from | 
|  | * inactive, the inode size is permanently set to 0. | 
|  | * | 
|  | * Calls from the truncate path always need to be sync unless we're in a wsync | 
|  | * filesystem and the file has already been unlinked. | 
|  | * | 
|  | * The caller is responsible for correctly setting the sync parameter.  It gets | 
|  | * too hard for us to guess here which path we're being called out of just | 
|  | * based on inode state. | 
|  | * | 
|  | * If we get an error, we must return with the inode locked and linked into the | 
|  | * current transaction. This keeps things simple for the higher level code, | 
|  | * because it always knows that the inode is locked and held in the transaction | 
|  | * that returns to it whether errors occur or not.  We don't mark the inode | 
|  | * dirty on error so that transactions can be easily aborted if possible. | 
|  | */ | 
|  | int | 
|  | xfs_itruncate_finish( | 
|  | xfs_trans_t	**tp, | 
|  | xfs_inode_t	*ip, | 
|  | xfs_fsize_t	new_size, | 
|  | int		fork, | 
|  | int		sync) | 
|  | { | 
|  | xfs_fsblock_t	first_block; | 
|  | xfs_fileoff_t	first_unmap_block; | 
|  | xfs_fileoff_t	last_block; | 
|  | xfs_filblks_t	unmap_len=0; | 
|  | xfs_mount_t	*mp; | 
|  | xfs_trans_t	*ntp; | 
|  | int		done; | 
|  | int		committed; | 
|  | xfs_bmap_free_t	free_list; | 
|  | int		error; | 
|  |  | 
|  | ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL)); | 
|  | ASSERT((new_size == 0) || (new_size <= ip->i_size)); | 
|  | ASSERT(*tp != NULL); | 
|  | ASSERT((*tp)->t_flags & XFS_TRANS_PERM_LOG_RES); | 
|  | ASSERT(ip->i_transp == *tp); | 
|  | ASSERT(ip->i_itemp != NULL); | 
|  | ASSERT(ip->i_itemp->ili_lock_flags == 0); | 
|  |  | 
|  |  | 
|  | ntp = *tp; | 
|  | mp = (ntp)->t_mountp; | 
|  | ASSERT(! XFS_NOT_DQATTACHED(mp, ip)); | 
|  |  | 
|  | /* | 
|  | * We only support truncating the entire attribute fork. | 
|  | */ | 
|  | if (fork == XFS_ATTR_FORK) { | 
|  | new_size = 0LL; | 
|  | } | 
|  | first_unmap_block = XFS_B_TO_FSB(mp, (xfs_ufsize_t)new_size); | 
|  | trace_xfs_itruncate_finish_start(ip, new_size); | 
|  |  | 
|  | /* | 
|  | * The first thing we do is set the size to new_size permanently | 
|  | * on disk.  This way we don't have to worry about anyone ever | 
|  | * being able to look at the data being freed even in the face | 
|  | * of a crash.  What we're getting around here is the case where | 
|  | * we free a block, it is allocated to another file, it is written | 
|  | * to, and then we crash.  If the new data gets written to the | 
|  | * file but the log buffers containing the free and reallocation | 
|  | * don't, then we'd end up with garbage in the blocks being freed. | 
|  | * As long as we make the new_size permanent before actually | 
|  | * freeing any blocks it doesn't matter if they get written to. | 
|  | * | 
|  | * The callers must signal into us whether or not the size | 
|  | * setting here must be synchronous.  There are a few cases | 
|  | * where it doesn't have to be synchronous.  Those cases | 
|  | * occur if the file is unlinked and we know the unlink is | 
|  | * permanent or if the blocks being truncated are guaranteed | 
|  | * to be beyond the inode eof (regardless of the link count) | 
|  | * and the eof value is permanent.  Both of these cases occur | 
|  | * only on wsync-mounted filesystems.  In those cases, we're | 
|  | * guaranteed that no user will ever see the data in the blocks | 
|  | * that are being truncated so the truncate can run async. | 
|  | * In the free beyond eof case, the file may wind up with | 
|  | * more blocks allocated to it than it needs if we crash | 
|  | * and that won't get fixed until the next time the file | 
|  | * is re-opened and closed but that's ok as that shouldn't | 
|  | * be too many blocks. | 
|  | * | 
|  | * However, we can't just make all wsync xactions run async | 
|  | * because there's one call out of the create path that needs | 
|  | * to run sync where it's truncating an existing file to size | 
|  | * 0 whose size is > 0. | 
|  | * | 
|  | * It's probably possible to come up with a test in this | 
|  | * routine that would correctly distinguish all the above | 
|  | * cases from the values of the function parameters and the | 
|  | * inode state but for sanity's sake, I've decided to let the | 
|  | * layers above just tell us.  It's simpler to correctly figure | 
|  | * out in the layer above exactly under what conditions we | 
|  | * can run async and I think it's easier for others read and | 
|  | * follow the logic in case something has to be changed. | 
|  | * cscope is your friend -- rcc. | 
|  | * | 
|  | * The attribute fork is much simpler. | 
|  | * | 
|  | * For the attribute fork we allow the caller to tell us whether | 
|  | * the unlink of the inode that led to this call is yet permanent | 
|  | * in the on disk log.  If it is not and we will be freeing extents | 
|  | * in this inode then we make the first transaction synchronous | 
|  | * to make sure that the unlink is permanent by the time we free | 
|  | * the blocks. | 
|  | */ | 
|  | if (fork == XFS_DATA_FORK) { | 
|  | if (ip->i_d.di_nextents > 0) { | 
|  | /* | 
|  | * If we are not changing the file size then do | 
|  | * not update the on-disk file size - we may be | 
|  | * called from xfs_inactive_free_eofblocks().  If we | 
|  | * update the on-disk file size and then the system | 
|  | * crashes before the contents of the file are | 
|  | * flushed to disk then the files may be full of | 
|  | * holes (ie NULL files bug). | 
|  | */ | 
|  | if (ip->i_size != new_size) { | 
|  | ip->i_d.di_size = new_size; | 
|  | ip->i_size = new_size; | 
|  | xfs_trans_log_inode(ntp, ip, XFS_ILOG_CORE); | 
|  | } | 
|  | } | 
|  | } else if (sync) { | 
|  | ASSERT(!(mp->m_flags & XFS_MOUNT_WSYNC)); | 
|  | if (ip->i_d.di_anextents > 0) | 
|  | xfs_trans_set_sync(ntp); | 
|  | } | 
|  | ASSERT(fork == XFS_DATA_FORK || | 
|  | (fork == XFS_ATTR_FORK && | 
|  | ((sync && !(mp->m_flags & XFS_MOUNT_WSYNC)) || | 
|  | (sync == 0 && (mp->m_flags & XFS_MOUNT_WSYNC))))); | 
|  |  | 
|  | /* | 
|  | * Since it is possible for space to become allocated beyond | 
|  | * the end of the file (in a crash where the space is allocated | 
|  | * but the inode size is not yet updated), simply remove any | 
|  | * blocks which show up between the new EOF and the maximum | 
|  | * possible file size.  If the first block to be removed is | 
|  | * beyond the maximum file size (ie it is the same as last_block), | 
|  | * then there is nothing to do. | 
|  | */ | 
|  | last_block = XFS_B_TO_FSB(mp, (xfs_ufsize_t)XFS_MAXIOFFSET(mp)); | 
|  | ASSERT(first_unmap_block <= last_block); | 
|  | done = 0; | 
|  | if (last_block == first_unmap_block) { | 
|  | done = 1; | 
|  | } else { | 
|  | unmap_len = last_block - first_unmap_block + 1; | 
|  | } | 
|  | while (!done) { | 
|  | /* | 
|  | * Free up up to XFS_ITRUNC_MAX_EXTENTS.  xfs_bunmapi() | 
|  | * will tell us whether it freed the entire range or | 
|  | * not.  If this is a synchronous mount (wsync), | 
|  | * then we can tell bunmapi to keep all the | 
|  | * transactions asynchronous since the unlink | 
|  | * transaction that made this inode inactive has | 
|  | * already hit the disk.  There's no danger of | 
|  | * the freed blocks being reused, there being a | 
|  | * crash, and the reused blocks suddenly reappearing | 
|  | * in this file with garbage in them once recovery | 
|  | * runs. | 
|  | */ | 
|  | xfs_bmap_init(&free_list, &first_block); | 
|  | error = xfs_bunmapi(ntp, ip, | 
|  | first_unmap_block, unmap_len, | 
|  | xfs_bmapi_aflag(fork), | 
|  | XFS_ITRUNC_MAX_EXTENTS, | 
|  | &first_block, &free_list, | 
|  | &done); | 
|  | if (error) { | 
|  | /* | 
|  | * If the bunmapi call encounters an error, | 
|  | * return to the caller where the transaction | 
|  | * can be properly aborted.  We just need to | 
|  | * make sure we're not holding any resources | 
|  | * that we were not when we came in. | 
|  | */ | 
|  | xfs_bmap_cancel(&free_list); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Duplicate the transaction that has the permanent | 
|  | * reservation and commit the old transaction. | 
|  | */ | 
|  | error = xfs_bmap_finish(tp, &free_list, &committed); | 
|  | ntp = *tp; | 
|  | if (committed) | 
|  | xfs_trans_ijoin(ntp, ip); | 
|  |  | 
|  | if (error) { | 
|  | /* | 
|  | * If the bmap finish call encounters an error, return | 
|  | * to the caller where the transaction can be properly | 
|  | * aborted.  We just need to make sure we're not | 
|  | * holding any resources that we were not when we came | 
|  | * in. | 
|  | * | 
|  | * Aborting from this point might lose some blocks in | 
|  | * the file system, but oh well. | 
|  | */ | 
|  | xfs_bmap_cancel(&free_list); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | if (committed) { | 
|  | /* | 
|  | * Mark the inode dirty so it will be logged and | 
|  | * moved forward in the log as part of every commit. | 
|  | */ | 
|  | xfs_trans_log_inode(ntp, ip, XFS_ILOG_CORE); | 
|  | } | 
|  |  | 
|  | ntp = xfs_trans_dup(ntp); | 
|  | error = xfs_trans_commit(*tp, 0); | 
|  | *tp = ntp; | 
|  |  | 
|  | xfs_trans_ijoin(ntp, ip); | 
|  |  | 
|  | if (error) | 
|  | return error; | 
|  | /* | 
|  | * transaction commit worked ok so we can drop the extra ticket | 
|  | * reference that we gained in xfs_trans_dup() | 
|  | */ | 
|  | xfs_log_ticket_put(ntp->t_ticket); | 
|  | error = xfs_trans_reserve(ntp, 0, | 
|  | XFS_ITRUNCATE_LOG_RES(mp), 0, | 
|  | XFS_TRANS_PERM_LOG_RES, | 
|  | XFS_ITRUNCATE_LOG_COUNT); | 
|  | if (error) | 
|  | return error; | 
|  | } | 
|  | /* | 
|  | * Only update the size in the case of the data fork, but | 
|  | * always re-log the inode so that our permanent transaction | 
|  | * can keep on rolling it forward in the log. | 
|  | */ | 
|  | if (fork == XFS_DATA_FORK) { | 
|  | xfs_isize_check(mp, ip, new_size); | 
|  | /* | 
|  | * If we are not changing the file size then do | 
|  | * not update the on-disk file size - we may be | 
|  | * called from xfs_inactive_free_eofblocks().  If we | 
|  | * update the on-disk file size and then the system | 
|  | * crashes before the contents of the file are | 
|  | * flushed to disk then the files may be full of | 
|  | * holes (ie NULL files bug). | 
|  | */ | 
|  | if (ip->i_size != new_size) { | 
|  | ip->i_d.di_size = new_size; | 
|  | ip->i_size = new_size; | 
|  | } | 
|  | } | 
|  | xfs_trans_log_inode(ntp, ip, XFS_ILOG_CORE); | 
|  | ASSERT((new_size != 0) || | 
|  | (fork == XFS_ATTR_FORK) || | 
|  | (ip->i_delayed_blks == 0)); | 
|  | ASSERT((new_size != 0) || | 
|  | (fork == XFS_ATTR_FORK) || | 
|  | (ip->i_d.di_nextents == 0)); | 
|  | trace_xfs_itruncate_finish_end(ip, new_size); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is called when the inode's link count goes to 0. | 
|  | * We place the on-disk inode on a list in the AGI.  It | 
|  | * will be pulled from this list when the inode is freed. | 
|  | */ | 
|  | int | 
|  | xfs_iunlink( | 
|  | xfs_trans_t	*tp, | 
|  | xfs_inode_t	*ip) | 
|  | { | 
|  | xfs_mount_t	*mp; | 
|  | xfs_agi_t	*agi; | 
|  | xfs_dinode_t	*dip; | 
|  | xfs_buf_t	*agibp; | 
|  | xfs_buf_t	*ibp; | 
|  | xfs_agino_t	agino; | 
|  | short		bucket_index; | 
|  | int		offset; | 
|  | int		error; | 
|  |  | 
|  | ASSERT(ip->i_d.di_nlink == 0); | 
|  | ASSERT(ip->i_d.di_mode != 0); | 
|  | ASSERT(ip->i_transp == tp); | 
|  |  | 
|  | mp = tp->t_mountp; | 
|  |  | 
|  | /* | 
|  | * Get the agi buffer first.  It ensures lock ordering | 
|  | * on the list. | 
|  | */ | 
|  | error = xfs_read_agi(mp, tp, XFS_INO_TO_AGNO(mp, ip->i_ino), &agibp); | 
|  | if (error) | 
|  | return error; | 
|  | agi = XFS_BUF_TO_AGI(agibp); | 
|  |  | 
|  | /* | 
|  | * Get the index into the agi hash table for the | 
|  | * list this inode will go on. | 
|  | */ | 
|  | agino = XFS_INO_TO_AGINO(mp, ip->i_ino); | 
|  | ASSERT(agino != 0); | 
|  | bucket_index = agino % XFS_AGI_UNLINKED_BUCKETS; | 
|  | ASSERT(agi->agi_unlinked[bucket_index]); | 
|  | ASSERT(be32_to_cpu(agi->agi_unlinked[bucket_index]) != agino); | 
|  |  | 
|  | if (be32_to_cpu(agi->agi_unlinked[bucket_index]) != NULLAGINO) { | 
|  | /* | 
|  | * There is already another inode in the bucket we need | 
|  | * to add ourselves to.  Add us at the front of the list. | 
|  | * Here we put the head pointer into our next pointer, | 
|  | * and then we fall through to point the head at us. | 
|  | */ | 
|  | error = xfs_itobp(mp, tp, ip, &dip, &ibp, XBF_LOCK); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | ASSERT(be32_to_cpu(dip->di_next_unlinked) == NULLAGINO); | 
|  | /* both on-disk, don't endian flip twice */ | 
|  | dip->di_next_unlinked = agi->agi_unlinked[bucket_index]; | 
|  | offset = ip->i_imap.im_boffset + | 
|  | offsetof(xfs_dinode_t, di_next_unlinked); | 
|  | xfs_trans_inode_buf(tp, ibp); | 
|  | xfs_trans_log_buf(tp, ibp, offset, | 
|  | (offset + sizeof(xfs_agino_t) - 1)); | 
|  | xfs_inobp_check(mp, ibp); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Point the bucket head pointer at the inode being inserted. | 
|  | */ | 
|  | ASSERT(agino != 0); | 
|  | agi->agi_unlinked[bucket_index] = cpu_to_be32(agino); | 
|  | offset = offsetof(xfs_agi_t, agi_unlinked) + | 
|  | (sizeof(xfs_agino_t) * bucket_index); | 
|  | xfs_trans_log_buf(tp, agibp, offset, | 
|  | (offset + sizeof(xfs_agino_t) - 1)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Pull the on-disk inode from the AGI unlinked list. | 
|  | */ | 
|  | STATIC int | 
|  | xfs_iunlink_remove( | 
|  | xfs_trans_t	*tp, | 
|  | xfs_inode_t	*ip) | 
|  | { | 
|  | xfs_ino_t	next_ino; | 
|  | xfs_mount_t	*mp; | 
|  | xfs_agi_t	*agi; | 
|  | xfs_dinode_t	*dip; | 
|  | xfs_buf_t	*agibp; | 
|  | xfs_buf_t	*ibp; | 
|  | xfs_agnumber_t	agno; | 
|  | xfs_agino_t	agino; | 
|  | xfs_agino_t	next_agino; | 
|  | xfs_buf_t	*last_ibp; | 
|  | xfs_dinode_t	*last_dip = NULL; | 
|  | short		bucket_index; | 
|  | int		offset, last_offset = 0; | 
|  | int		error; | 
|  |  | 
|  | mp = tp->t_mountp; | 
|  | agno = XFS_INO_TO_AGNO(mp, ip->i_ino); | 
|  |  | 
|  | /* | 
|  | * Get the agi buffer first.  It ensures lock ordering | 
|  | * on the list. | 
|  | */ | 
|  | error = xfs_read_agi(mp, tp, agno, &agibp); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | agi = XFS_BUF_TO_AGI(agibp); | 
|  |  | 
|  | /* | 
|  | * Get the index into the agi hash table for the | 
|  | * list this inode will go on. | 
|  | */ | 
|  | agino = XFS_INO_TO_AGINO(mp, ip->i_ino); | 
|  | ASSERT(agino != 0); | 
|  | bucket_index = agino % XFS_AGI_UNLINKED_BUCKETS; | 
|  | ASSERT(be32_to_cpu(agi->agi_unlinked[bucket_index]) != NULLAGINO); | 
|  | ASSERT(agi->agi_unlinked[bucket_index]); | 
|  |  | 
|  | if (be32_to_cpu(agi->agi_unlinked[bucket_index]) == agino) { | 
|  | /* | 
|  | * We're at the head of the list.  Get the inode's | 
|  | * on-disk buffer to see if there is anyone after us | 
|  | * on the list.  Only modify our next pointer if it | 
|  | * is not already NULLAGINO.  This saves us the overhead | 
|  | * of dealing with the buffer when there is no need to | 
|  | * change it. | 
|  | */ | 
|  | error = xfs_itobp(mp, tp, ip, &dip, &ibp, XBF_LOCK); | 
|  | if (error) { | 
|  | xfs_warn(mp, "%s: xfs_itobp() returned error %d.", | 
|  | __func__, error); | 
|  | return error; | 
|  | } | 
|  | next_agino = be32_to_cpu(dip->di_next_unlinked); | 
|  | ASSERT(next_agino != 0); | 
|  | if (next_agino != NULLAGINO) { | 
|  | dip->di_next_unlinked = cpu_to_be32(NULLAGINO); | 
|  | offset = ip->i_imap.im_boffset + | 
|  | offsetof(xfs_dinode_t, di_next_unlinked); | 
|  | xfs_trans_inode_buf(tp, ibp); | 
|  | xfs_trans_log_buf(tp, ibp, offset, | 
|  | (offset + sizeof(xfs_agino_t) - 1)); | 
|  | xfs_inobp_check(mp, ibp); | 
|  | } else { | 
|  | xfs_trans_brelse(tp, ibp); | 
|  | } | 
|  | /* | 
|  | * Point the bucket head pointer at the next inode. | 
|  | */ | 
|  | ASSERT(next_agino != 0); | 
|  | ASSERT(next_agino != agino); | 
|  | agi->agi_unlinked[bucket_index] = cpu_to_be32(next_agino); | 
|  | offset = offsetof(xfs_agi_t, agi_unlinked) + | 
|  | (sizeof(xfs_agino_t) * bucket_index); | 
|  | xfs_trans_log_buf(tp, agibp, offset, | 
|  | (offset + sizeof(xfs_agino_t) - 1)); | 
|  | } else { | 
|  | /* | 
|  | * We need to search the list for the inode being freed. | 
|  | */ | 
|  | next_agino = be32_to_cpu(agi->agi_unlinked[bucket_index]); | 
|  | last_ibp = NULL; | 
|  | while (next_agino != agino) { | 
|  | /* | 
|  | * If the last inode wasn't the one pointing to | 
|  | * us, then release its buffer since we're not | 
|  | * going to do anything with it. | 
|  | */ | 
|  | if (last_ibp != NULL) { | 
|  | xfs_trans_brelse(tp, last_ibp); | 
|  | } | 
|  | next_ino = XFS_AGINO_TO_INO(mp, agno, next_agino); | 
|  | error = xfs_inotobp(mp, tp, next_ino, &last_dip, | 
|  | &last_ibp, &last_offset, 0); | 
|  | if (error) { | 
|  | xfs_warn(mp, | 
|  | "%s: xfs_inotobp() returned error %d.", | 
|  | __func__, error); | 
|  | return error; | 
|  | } | 
|  | next_agino = be32_to_cpu(last_dip->di_next_unlinked); | 
|  | ASSERT(next_agino != NULLAGINO); | 
|  | ASSERT(next_agino != 0); | 
|  | } | 
|  | /* | 
|  | * Now last_ibp points to the buffer previous to us on | 
|  | * the unlinked list.  Pull us from the list. | 
|  | */ | 
|  | error = xfs_itobp(mp, tp, ip, &dip, &ibp, XBF_LOCK); | 
|  | if (error) { | 
|  | xfs_warn(mp, "%s: xfs_itobp(2) returned error %d.", | 
|  | __func__, error); | 
|  | return error; | 
|  | } | 
|  | next_agino = be32_to_cpu(dip->di_next_unlinked); | 
|  | ASSERT(next_agino != 0); | 
|  | ASSERT(next_agino != agino); | 
|  | if (next_agino != NULLAGINO) { | 
|  | dip->di_next_unlinked = cpu_to_be32(NULLAGINO); | 
|  | offset = ip->i_imap.im_boffset + | 
|  | offsetof(xfs_dinode_t, di_next_unlinked); | 
|  | xfs_trans_inode_buf(tp, ibp); | 
|  | xfs_trans_log_buf(tp, ibp, offset, | 
|  | (offset + sizeof(xfs_agino_t) - 1)); | 
|  | xfs_inobp_check(mp, ibp); | 
|  | } else { | 
|  | xfs_trans_brelse(tp, ibp); | 
|  | } | 
|  | /* | 
|  | * Point the previous inode on the list to the next inode. | 
|  | */ | 
|  | last_dip->di_next_unlinked = cpu_to_be32(next_agino); | 
|  | ASSERT(next_agino != 0); | 
|  | offset = last_offset + offsetof(xfs_dinode_t, di_next_unlinked); | 
|  | xfs_trans_inode_buf(tp, last_ibp); | 
|  | xfs_trans_log_buf(tp, last_ibp, offset, | 
|  | (offset + sizeof(xfs_agino_t) - 1)); | 
|  | xfs_inobp_check(mp, last_ibp); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * A big issue when freeing the inode cluster is is that we _cannot_ skip any | 
|  | * inodes that are in memory - they all must be marked stale and attached to | 
|  | * the cluster buffer. | 
|  | */ | 
|  | STATIC void | 
|  | xfs_ifree_cluster( | 
|  | xfs_inode_t	*free_ip, | 
|  | xfs_trans_t	*tp, | 
|  | xfs_ino_t	inum) | 
|  | { | 
|  | xfs_mount_t		*mp = free_ip->i_mount; | 
|  | int			blks_per_cluster; | 
|  | int			nbufs; | 
|  | int			ninodes; | 
|  | int			i, j; | 
|  | xfs_daddr_t		blkno; | 
|  | xfs_buf_t		*bp; | 
|  | xfs_inode_t		*ip; | 
|  | xfs_inode_log_item_t	*iip; | 
|  | xfs_log_item_t		*lip; | 
|  | struct xfs_perag	*pag; | 
|  |  | 
|  | pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, inum)); | 
|  | if (mp->m_sb.sb_blocksize >= XFS_INODE_CLUSTER_SIZE(mp)) { | 
|  | blks_per_cluster = 1; | 
|  | ninodes = mp->m_sb.sb_inopblock; | 
|  | nbufs = XFS_IALLOC_BLOCKS(mp); | 
|  | } else { | 
|  | blks_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) / | 
|  | mp->m_sb.sb_blocksize; | 
|  | ninodes = blks_per_cluster * mp->m_sb.sb_inopblock; | 
|  | nbufs = XFS_IALLOC_BLOCKS(mp) / blks_per_cluster; | 
|  | } | 
|  |  | 
|  | for (j = 0; j < nbufs; j++, inum += ninodes) { | 
|  | blkno = XFS_AGB_TO_DADDR(mp, XFS_INO_TO_AGNO(mp, inum), | 
|  | XFS_INO_TO_AGBNO(mp, inum)); | 
|  |  | 
|  | /* | 
|  | * We obtain and lock the backing buffer first in the process | 
|  | * here, as we have to ensure that any dirty inode that we | 
|  | * can't get the flush lock on is attached to the buffer. | 
|  | * If we scan the in-memory inodes first, then buffer IO can | 
|  | * complete before we get a lock on it, and hence we may fail | 
|  | * to mark all the active inodes on the buffer stale. | 
|  | */ | 
|  | bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, blkno, | 
|  | mp->m_bsize * blks_per_cluster, | 
|  | XBF_LOCK); | 
|  |  | 
|  | /* | 
|  | * Walk the inodes already attached to the buffer and mark them | 
|  | * stale. These will all have the flush locks held, so an | 
|  | * in-memory inode walk can't lock them. By marking them all | 
|  | * stale first, we will not attempt to lock them in the loop | 
|  | * below as the XFS_ISTALE flag will be set. | 
|  | */ | 
|  | lip = XFS_BUF_FSPRIVATE(bp, xfs_log_item_t *); | 
|  | while (lip) { | 
|  | if (lip->li_type == XFS_LI_INODE) { | 
|  | iip = (xfs_inode_log_item_t *)lip; | 
|  | ASSERT(iip->ili_logged == 1); | 
|  | lip->li_cb = xfs_istale_done; | 
|  | xfs_trans_ail_copy_lsn(mp->m_ail, | 
|  | &iip->ili_flush_lsn, | 
|  | &iip->ili_item.li_lsn); | 
|  | xfs_iflags_set(iip->ili_inode, XFS_ISTALE); | 
|  | } | 
|  | lip = lip->li_bio_list; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * For each inode in memory attempt to add it to the inode | 
|  | * buffer and set it up for being staled on buffer IO | 
|  | * completion.  This is safe as we've locked out tail pushing | 
|  | * and flushing by locking the buffer. | 
|  | * | 
|  | * We have already marked every inode that was part of a | 
|  | * transaction stale above, which means there is no point in | 
|  | * even trying to lock them. | 
|  | */ | 
|  | for (i = 0; i < ninodes; i++) { | 
|  | retry: | 
|  | rcu_read_lock(); | 
|  | ip = radix_tree_lookup(&pag->pag_ici_root, | 
|  | XFS_INO_TO_AGINO(mp, (inum + i))); | 
|  |  | 
|  | /* Inode not in memory, nothing to do */ | 
|  | if (!ip) { | 
|  | rcu_read_unlock(); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * because this is an RCU protected lookup, we could | 
|  | * find a recently freed or even reallocated inode | 
|  | * during the lookup. We need to check under the | 
|  | * i_flags_lock for a valid inode here. Skip it if it | 
|  | * is not valid, the wrong inode or stale. | 
|  | */ | 
|  | spin_lock(&ip->i_flags_lock); | 
|  | if (ip->i_ino != inum + i || | 
|  | __xfs_iflags_test(ip, XFS_ISTALE)) { | 
|  | spin_unlock(&ip->i_flags_lock); | 
|  | rcu_read_unlock(); | 
|  | continue; | 
|  | } | 
|  | spin_unlock(&ip->i_flags_lock); | 
|  |  | 
|  | /* | 
|  | * Don't try to lock/unlock the current inode, but we | 
|  | * _cannot_ skip the other inodes that we did not find | 
|  | * in the list attached to the buffer and are not | 
|  | * already marked stale. If we can't lock it, back off | 
|  | * and retry. | 
|  | */ | 
|  | if (ip != free_ip && | 
|  | !xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) { | 
|  | rcu_read_unlock(); | 
|  | delay(1); | 
|  | goto retry; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | xfs_iflock(ip); | 
|  | xfs_iflags_set(ip, XFS_ISTALE); | 
|  |  | 
|  | /* | 
|  | * we don't need to attach clean inodes or those only | 
|  | * with unlogged changes (which we throw away, anyway). | 
|  | */ | 
|  | iip = ip->i_itemp; | 
|  | if (!iip || xfs_inode_clean(ip)) { | 
|  | ASSERT(ip != free_ip); | 
|  | ip->i_update_core = 0; | 
|  | xfs_ifunlock(ip); | 
|  | xfs_iunlock(ip, XFS_ILOCK_EXCL); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | iip->ili_last_fields = iip->ili_format.ilf_fields; | 
|  | iip->ili_format.ilf_fields = 0; | 
|  | iip->ili_logged = 1; | 
|  | xfs_trans_ail_copy_lsn(mp->m_ail, &iip->ili_flush_lsn, | 
|  | &iip->ili_item.li_lsn); | 
|  |  | 
|  | xfs_buf_attach_iodone(bp, xfs_istale_done, | 
|  | &iip->ili_item); | 
|  |  | 
|  | if (ip != free_ip) | 
|  | xfs_iunlock(ip, XFS_ILOCK_EXCL); | 
|  | } | 
|  |  | 
|  | xfs_trans_stale_inode_buf(tp, bp); | 
|  | xfs_trans_binval(tp, bp); | 
|  | } | 
|  |  | 
|  | xfs_perag_put(pag); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is called to return an inode to the inode free list. | 
|  | * The inode should already be truncated to 0 length and have | 
|  | * no pages associated with it.  This routine also assumes that | 
|  | * the inode is already a part of the transaction. | 
|  | * | 
|  | * The on-disk copy of the inode will have been added to the list | 
|  | * of unlinked inodes in the AGI. We need to remove the inode from | 
|  | * that list atomically with respect to freeing it here. | 
|  | */ | 
|  | int | 
|  | xfs_ifree( | 
|  | xfs_trans_t	*tp, | 
|  | xfs_inode_t	*ip, | 
|  | xfs_bmap_free_t	*flist) | 
|  | { | 
|  | int			error; | 
|  | int			delete; | 
|  | xfs_ino_t		first_ino; | 
|  | xfs_dinode_t    	*dip; | 
|  | xfs_buf_t       	*ibp; | 
|  |  | 
|  | ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL)); | 
|  | ASSERT(ip->i_transp == tp); | 
|  | ASSERT(ip->i_d.di_nlink == 0); | 
|  | ASSERT(ip->i_d.di_nextents == 0); | 
|  | ASSERT(ip->i_d.di_anextents == 0); | 
|  | ASSERT((ip->i_d.di_size == 0 && ip->i_size == 0) || | 
|  | ((ip->i_d.di_mode & S_IFMT) != S_IFREG)); | 
|  | ASSERT(ip->i_d.di_nblocks == 0); | 
|  |  | 
|  | /* | 
|  | * Pull the on-disk inode from the AGI unlinked list. | 
|  | */ | 
|  | error = xfs_iunlink_remove(tp, ip); | 
|  | if (error != 0) { | 
|  | return error; | 
|  | } | 
|  |  | 
|  | error = xfs_difree(tp, ip->i_ino, flist, &delete, &first_ino); | 
|  | if (error != 0) { | 
|  | return error; | 
|  | } | 
|  | ip->i_d.di_mode = 0;		/* mark incore inode as free */ | 
|  | ip->i_d.di_flags = 0; | 
|  | ip->i_d.di_dmevmask = 0; | 
|  | ip->i_d.di_forkoff = 0;		/* mark the attr fork not in use */ | 
|  | ip->i_df.if_ext_max = | 
|  | XFS_IFORK_DSIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t); | 
|  | ip->i_d.di_format = XFS_DINODE_FMT_EXTENTS; | 
|  | ip->i_d.di_aformat = XFS_DINODE_FMT_EXTENTS; | 
|  | /* | 
|  | * Bump the generation count so no one will be confused | 
|  | * by reincarnations of this inode. | 
|  | */ | 
|  | ip->i_d.di_gen++; | 
|  |  | 
|  | xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); | 
|  |  | 
|  | error = xfs_itobp(ip->i_mount, tp, ip, &dip, &ibp, XBF_LOCK); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | /* | 
|  | * Clear the on-disk di_mode. This is to prevent xfs_bulkstat | 
|  | * from picking up this inode when it is reclaimed (its incore state | 
|  | * initialzed but not flushed to disk yet). The in-core di_mode is | 
|  | * already cleared  and a corresponding transaction logged. | 
|  | * The hack here just synchronizes the in-core to on-disk | 
|  | * di_mode value in advance before the actual inode sync to disk. | 
|  | * This is OK because the inode is already unlinked and would never | 
|  | * change its di_mode again for this inode generation. | 
|  | * This is a temporary hack that would require a proper fix | 
|  | * in the future. | 
|  | */ | 
|  | dip->di_mode = 0; | 
|  |  | 
|  | if (delete) { | 
|  | xfs_ifree_cluster(ip, tp, first_ino); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reallocate the space for if_broot based on the number of records | 
|  | * being added or deleted as indicated in rec_diff.  Move the records | 
|  | * and pointers in if_broot to fit the new size.  When shrinking this | 
|  | * will eliminate holes between the records and pointers created by | 
|  | * the caller.  When growing this will create holes to be filled in | 
|  | * by the caller. | 
|  | * | 
|  | * The caller must not request to add more records than would fit in | 
|  | * the on-disk inode root.  If the if_broot is currently NULL, then | 
|  | * if we adding records one will be allocated.  The caller must also | 
|  | * not request that the number of records go below zero, although | 
|  | * it can go to zero. | 
|  | * | 
|  | * ip -- the inode whose if_broot area is changing | 
|  | * ext_diff -- the change in the number of records, positive or negative, | 
|  | *	 requested for the if_broot array. | 
|  | */ | 
|  | void | 
|  | xfs_iroot_realloc( | 
|  | xfs_inode_t		*ip, | 
|  | int			rec_diff, | 
|  | int			whichfork) | 
|  | { | 
|  | struct xfs_mount	*mp = ip->i_mount; | 
|  | int			cur_max; | 
|  | xfs_ifork_t		*ifp; | 
|  | struct xfs_btree_block	*new_broot; | 
|  | int			new_max; | 
|  | size_t			new_size; | 
|  | char			*np; | 
|  | char			*op; | 
|  |  | 
|  | /* | 
|  | * Handle the degenerate case quietly. | 
|  | */ | 
|  | if (rec_diff == 0) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | ifp = XFS_IFORK_PTR(ip, whichfork); | 
|  | if (rec_diff > 0) { | 
|  | /* | 
|  | * If there wasn't any memory allocated before, just | 
|  | * allocate it now and get out. | 
|  | */ | 
|  | if (ifp->if_broot_bytes == 0) { | 
|  | new_size = (size_t)XFS_BMAP_BROOT_SPACE_CALC(rec_diff); | 
|  | ifp->if_broot = kmem_alloc(new_size, KM_SLEEP | KM_NOFS); | 
|  | ifp->if_broot_bytes = (int)new_size; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If there is already an existing if_broot, then we need | 
|  | * to realloc() it and shift the pointers to their new | 
|  | * location.  The records don't change location because | 
|  | * they are kept butted up against the btree block header. | 
|  | */ | 
|  | cur_max = xfs_bmbt_maxrecs(mp, ifp->if_broot_bytes, 0); | 
|  | new_max = cur_max + rec_diff; | 
|  | new_size = (size_t)XFS_BMAP_BROOT_SPACE_CALC(new_max); | 
|  | ifp->if_broot = kmem_realloc(ifp->if_broot, new_size, | 
|  | (size_t)XFS_BMAP_BROOT_SPACE_CALC(cur_max), /* old size */ | 
|  | KM_SLEEP | KM_NOFS); | 
|  | op = (char *)XFS_BMAP_BROOT_PTR_ADDR(mp, ifp->if_broot, 1, | 
|  | ifp->if_broot_bytes); | 
|  | np = (char *)XFS_BMAP_BROOT_PTR_ADDR(mp, ifp->if_broot, 1, | 
|  | (int)new_size); | 
|  | ifp->if_broot_bytes = (int)new_size; | 
|  | ASSERT(ifp->if_broot_bytes <= | 
|  | XFS_IFORK_SIZE(ip, whichfork) + XFS_BROOT_SIZE_ADJ); | 
|  | memmove(np, op, cur_max * (uint)sizeof(xfs_dfsbno_t)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * rec_diff is less than 0.  In this case, we are shrinking the | 
|  | * if_broot buffer.  It must already exist.  If we go to zero | 
|  | * records, just get rid of the root and clear the status bit. | 
|  | */ | 
|  | ASSERT((ifp->if_broot != NULL) && (ifp->if_broot_bytes > 0)); | 
|  | cur_max = xfs_bmbt_maxrecs(mp, ifp->if_broot_bytes, 0); | 
|  | new_max = cur_max + rec_diff; | 
|  | ASSERT(new_max >= 0); | 
|  | if (new_max > 0) | 
|  | new_size = (size_t)XFS_BMAP_BROOT_SPACE_CALC(new_max); | 
|  | else | 
|  | new_size = 0; | 
|  | if (new_size > 0) { | 
|  | new_broot = kmem_alloc(new_size, KM_SLEEP | KM_NOFS); | 
|  | /* | 
|  | * First copy over the btree block header. | 
|  | */ | 
|  | memcpy(new_broot, ifp->if_broot, XFS_BTREE_LBLOCK_LEN); | 
|  | } else { | 
|  | new_broot = NULL; | 
|  | ifp->if_flags &= ~XFS_IFBROOT; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Only copy the records and pointers if there are any. | 
|  | */ | 
|  | if (new_max > 0) { | 
|  | /* | 
|  | * First copy the records. | 
|  | */ | 
|  | op = (char *)XFS_BMBT_REC_ADDR(mp, ifp->if_broot, 1); | 
|  | np = (char *)XFS_BMBT_REC_ADDR(mp, new_broot, 1); | 
|  | memcpy(np, op, new_max * (uint)sizeof(xfs_bmbt_rec_t)); | 
|  |  | 
|  | /* | 
|  | * Then copy the pointers. | 
|  | */ | 
|  | op = (char *)XFS_BMAP_BROOT_PTR_ADDR(mp, ifp->if_broot, 1, | 
|  | ifp->if_broot_bytes); | 
|  | np = (char *)XFS_BMAP_BROOT_PTR_ADDR(mp, new_broot, 1, | 
|  | (int)new_size); | 
|  | memcpy(np, op, new_max * (uint)sizeof(xfs_dfsbno_t)); | 
|  | } | 
|  | kmem_free(ifp->if_broot); | 
|  | ifp->if_broot = new_broot; | 
|  | ifp->if_broot_bytes = (int)new_size; | 
|  | ASSERT(ifp->if_broot_bytes <= | 
|  | XFS_IFORK_SIZE(ip, whichfork) + XFS_BROOT_SIZE_ADJ); | 
|  | return; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * This is called when the amount of space needed for if_data | 
|  | * is increased or decreased.  The change in size is indicated by | 
|  | * the number of bytes that need to be added or deleted in the | 
|  | * byte_diff parameter. | 
|  | * | 
|  | * If the amount of space needed has decreased below the size of the | 
|  | * inline buffer, then switch to using the inline buffer.  Otherwise, | 
|  | * use kmem_realloc() or kmem_alloc() to adjust the size of the buffer | 
|  | * to what is needed. | 
|  | * | 
|  | * ip -- the inode whose if_data area is changing | 
|  | * byte_diff -- the change in the number of bytes, positive or negative, | 
|  | *	 requested for the if_data array. | 
|  | */ | 
|  | void | 
|  | xfs_idata_realloc( | 
|  | xfs_inode_t	*ip, | 
|  | int		byte_diff, | 
|  | int		whichfork) | 
|  | { | 
|  | xfs_ifork_t	*ifp; | 
|  | int		new_size; | 
|  | int		real_size; | 
|  |  | 
|  | if (byte_diff == 0) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | ifp = XFS_IFORK_PTR(ip, whichfork); | 
|  | new_size = (int)ifp->if_bytes + byte_diff; | 
|  | ASSERT(new_size >= 0); | 
|  |  | 
|  | if (new_size == 0) { | 
|  | if (ifp->if_u1.if_data != ifp->if_u2.if_inline_data) { | 
|  | kmem_free(ifp->if_u1.if_data); | 
|  | } | 
|  | ifp->if_u1.if_data = NULL; | 
|  | real_size = 0; | 
|  | } else if (new_size <= sizeof(ifp->if_u2.if_inline_data)) { | 
|  | /* | 
|  | * If the valid extents/data can fit in if_inline_ext/data, | 
|  | * copy them from the malloc'd vector and free it. | 
|  | */ | 
|  | if (ifp->if_u1.if_data == NULL) { | 
|  | ifp->if_u1.if_data = ifp->if_u2.if_inline_data; | 
|  | } else if (ifp->if_u1.if_data != ifp->if_u2.if_inline_data) { | 
|  | ASSERT(ifp->if_real_bytes != 0); | 
|  | memcpy(ifp->if_u2.if_inline_data, ifp->if_u1.if_data, | 
|  | new_size); | 
|  | kmem_free(ifp->if_u1.if_data); | 
|  | ifp->if_u1.if_data = ifp->if_u2.if_inline_data; | 
|  | } | 
|  | real_size = 0; | 
|  | } else { | 
|  | /* | 
|  | * Stuck with malloc/realloc. | 
|  | * For inline data, the underlying buffer must be | 
|  | * a multiple of 4 bytes in size so that it can be | 
|  | * logged and stay on word boundaries.  We enforce | 
|  | * that here. | 
|  | */ | 
|  | real_size = roundup(new_size, 4); | 
|  | if (ifp->if_u1.if_data == NULL) { | 
|  | ASSERT(ifp->if_real_bytes == 0); | 
|  | ifp->if_u1.if_data = kmem_alloc(real_size, | 
|  | KM_SLEEP | KM_NOFS); | 
|  | } else if (ifp->if_u1.if_data != ifp->if_u2.if_inline_data) { | 
|  | /* | 
|  | * Only do the realloc if the underlying size | 
|  | * is really changing. | 
|  | */ | 
|  | if (ifp->if_real_bytes != real_size) { | 
|  | ifp->if_u1.if_data = | 
|  | kmem_realloc(ifp->if_u1.if_data, | 
|  | real_size, | 
|  | ifp->if_real_bytes, | 
|  | KM_SLEEP | KM_NOFS); | 
|  | } | 
|  | } else { | 
|  | ASSERT(ifp->if_real_bytes == 0); | 
|  | ifp->if_u1.if_data = kmem_alloc(real_size, | 
|  | KM_SLEEP | KM_NOFS); | 
|  | memcpy(ifp->if_u1.if_data, ifp->if_u2.if_inline_data, | 
|  | ifp->if_bytes); | 
|  | } | 
|  | } | 
|  | ifp->if_real_bytes = real_size; | 
|  | ifp->if_bytes = new_size; | 
|  | ASSERT(ifp->if_bytes <= XFS_IFORK_SIZE(ip, whichfork)); | 
|  | } | 
|  |  | 
|  | void | 
|  | xfs_idestroy_fork( | 
|  | xfs_inode_t	*ip, | 
|  | int		whichfork) | 
|  | { | 
|  | xfs_ifork_t	*ifp; | 
|  |  | 
|  | ifp = XFS_IFORK_PTR(ip, whichfork); | 
|  | if (ifp->if_broot != NULL) { | 
|  | kmem_free(ifp->if_broot); | 
|  | ifp->if_broot = NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the format is local, then we can't have an extents | 
|  | * array so just look for an inline data array.  If we're | 
|  | * not local then we may or may not have an extents list, | 
|  | * so check and free it up if we do. | 
|  | */ | 
|  | if (XFS_IFORK_FORMAT(ip, whichfork) == XFS_DINODE_FMT_LOCAL) { | 
|  | if ((ifp->if_u1.if_data != ifp->if_u2.if_inline_data) && | 
|  | (ifp->if_u1.if_data != NULL)) { | 
|  | ASSERT(ifp->if_real_bytes != 0); | 
|  | kmem_free(ifp->if_u1.if_data); | 
|  | ifp->if_u1.if_data = NULL; | 
|  | ifp->if_real_bytes = 0; | 
|  | } | 
|  | } else if ((ifp->if_flags & XFS_IFEXTENTS) && | 
|  | ((ifp->if_flags & XFS_IFEXTIREC) || | 
|  | ((ifp->if_u1.if_extents != NULL) && | 
|  | (ifp->if_u1.if_extents != ifp->if_u2.if_inline_ext)))) { | 
|  | ASSERT(ifp->if_real_bytes != 0); | 
|  | xfs_iext_destroy(ifp); | 
|  | } | 
|  | ASSERT(ifp->if_u1.if_extents == NULL || | 
|  | ifp->if_u1.if_extents == ifp->if_u2.if_inline_ext); | 
|  | ASSERT(ifp->if_real_bytes == 0); | 
|  | if (whichfork == XFS_ATTR_FORK) { | 
|  | kmem_zone_free(xfs_ifork_zone, ip->i_afp); | 
|  | ip->i_afp = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is called to unpin an inode.  The caller must have the inode locked | 
|  | * in at least shared mode so that the buffer cannot be subsequently pinned | 
|  | * once someone is waiting for it to be unpinned. | 
|  | */ | 
|  | static void | 
|  | xfs_iunpin_nowait( | 
|  | struct xfs_inode	*ip) | 
|  | { | 
|  | ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED)); | 
|  |  | 
|  | trace_xfs_inode_unpin_nowait(ip, _RET_IP_); | 
|  |  | 
|  | /* Give the log a push to start the unpinning I/O */ | 
|  | xfs_log_force_lsn(ip->i_mount, ip->i_itemp->ili_last_lsn, 0); | 
|  |  | 
|  | } | 
|  |  | 
|  | void | 
|  | xfs_iunpin_wait( | 
|  | struct xfs_inode	*ip) | 
|  | { | 
|  | if (xfs_ipincount(ip)) { | 
|  | xfs_iunpin_nowait(ip); | 
|  | wait_event(ip->i_ipin_wait, (xfs_ipincount(ip) == 0)); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * xfs_iextents_copy() | 
|  | * | 
|  | * This is called to copy the REAL extents (as opposed to the delayed | 
|  | * allocation extents) from the inode into the given buffer.  It | 
|  | * returns the number of bytes copied into the buffer. | 
|  | * | 
|  | * If there are no delayed allocation extents, then we can just | 
|  | * memcpy() the extents into the buffer.  Otherwise, we need to | 
|  | * examine each extent in turn and skip those which are delayed. | 
|  | */ | 
|  | int | 
|  | xfs_iextents_copy( | 
|  | xfs_inode_t		*ip, | 
|  | xfs_bmbt_rec_t		*dp, | 
|  | int			whichfork) | 
|  | { | 
|  | int			copied; | 
|  | int			i; | 
|  | xfs_ifork_t		*ifp; | 
|  | int			nrecs; | 
|  | xfs_fsblock_t		start_block; | 
|  |  | 
|  | ifp = XFS_IFORK_PTR(ip, whichfork); | 
|  | ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED)); | 
|  | ASSERT(ifp->if_bytes > 0); | 
|  |  | 
|  | nrecs = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t); | 
|  | XFS_BMAP_TRACE_EXLIST(ip, nrecs, whichfork); | 
|  | ASSERT(nrecs > 0); | 
|  |  | 
|  | /* | 
|  | * There are some delayed allocation extents in the | 
|  | * inode, so copy the extents one at a time and skip | 
|  | * the delayed ones.  There must be at least one | 
|  | * non-delayed extent. | 
|  | */ | 
|  | copied = 0; | 
|  | for (i = 0; i < nrecs; i++) { | 
|  | xfs_bmbt_rec_host_t *ep = xfs_iext_get_ext(ifp, i); | 
|  | start_block = xfs_bmbt_get_startblock(ep); | 
|  | if (isnullstartblock(start_block)) { | 
|  | /* | 
|  | * It's a delayed allocation extent, so skip it. | 
|  | */ | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Translate to on disk format */ | 
|  | put_unaligned(cpu_to_be64(ep->l0), &dp->l0); | 
|  | put_unaligned(cpu_to_be64(ep->l1), &dp->l1); | 
|  | dp++; | 
|  | copied++; | 
|  | } | 
|  | ASSERT(copied != 0); | 
|  | xfs_validate_extents(ifp, copied, XFS_EXTFMT_INODE(ip)); | 
|  |  | 
|  | return (copied * (uint)sizeof(xfs_bmbt_rec_t)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Each of the following cases stores data into the same region | 
|  | * of the on-disk inode, so only one of them can be valid at | 
|  | * any given time. While it is possible to have conflicting formats | 
|  | * and log flags, e.g. having XFS_ILOG_?DATA set when the fork is | 
|  | * in EXTENTS format, this can only happen when the fork has | 
|  | * changed formats after being modified but before being flushed. | 
|  | * In these cases, the format always takes precedence, because the | 
|  | * format indicates the current state of the fork. | 
|  | */ | 
|  | /*ARGSUSED*/ | 
|  | STATIC void | 
|  | xfs_iflush_fork( | 
|  | xfs_inode_t		*ip, | 
|  | xfs_dinode_t		*dip, | 
|  | xfs_inode_log_item_t	*iip, | 
|  | int			whichfork, | 
|  | xfs_buf_t		*bp) | 
|  | { | 
|  | char			*cp; | 
|  | xfs_ifork_t		*ifp; | 
|  | xfs_mount_t		*mp; | 
|  | #ifdef XFS_TRANS_DEBUG | 
|  | int			first; | 
|  | #endif | 
|  | static const short	brootflag[2] = | 
|  | { XFS_ILOG_DBROOT, XFS_ILOG_ABROOT }; | 
|  | static const short	dataflag[2] = | 
|  | { XFS_ILOG_DDATA, XFS_ILOG_ADATA }; | 
|  | static const short	extflag[2] = | 
|  | { XFS_ILOG_DEXT, XFS_ILOG_AEXT }; | 
|  |  | 
|  | if (!iip) | 
|  | return; | 
|  | ifp = XFS_IFORK_PTR(ip, whichfork); | 
|  | /* | 
|  | * This can happen if we gave up in iformat in an error path, | 
|  | * for the attribute fork. | 
|  | */ | 
|  | if (!ifp) { | 
|  | ASSERT(whichfork == XFS_ATTR_FORK); | 
|  | return; | 
|  | } | 
|  | cp = XFS_DFORK_PTR(dip, whichfork); | 
|  | mp = ip->i_mount; | 
|  | switch (XFS_IFORK_FORMAT(ip, whichfork)) { | 
|  | case XFS_DINODE_FMT_LOCAL: | 
|  | if ((iip->ili_format.ilf_fields & dataflag[whichfork]) && | 
|  | (ifp->if_bytes > 0)) { | 
|  | ASSERT(ifp->if_u1.if_data != NULL); | 
|  | ASSERT(ifp->if_bytes <= XFS_IFORK_SIZE(ip, whichfork)); | 
|  | memcpy(cp, ifp->if_u1.if_data, ifp->if_bytes); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case XFS_DINODE_FMT_EXTENTS: | 
|  | ASSERT((ifp->if_flags & XFS_IFEXTENTS) || | 
|  | !(iip->ili_format.ilf_fields & extflag[whichfork])); | 
|  | if ((iip->ili_format.ilf_fields & extflag[whichfork]) && | 
|  | (ifp->if_bytes > 0)) { | 
|  | ASSERT(xfs_iext_get_ext(ifp, 0)); | 
|  | ASSERT(XFS_IFORK_NEXTENTS(ip, whichfork) > 0); | 
|  | (void)xfs_iextents_copy(ip, (xfs_bmbt_rec_t *)cp, | 
|  | whichfork); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case XFS_DINODE_FMT_BTREE: | 
|  | if ((iip->ili_format.ilf_fields & brootflag[whichfork]) && | 
|  | (ifp->if_broot_bytes > 0)) { | 
|  | ASSERT(ifp->if_broot != NULL); | 
|  | ASSERT(ifp->if_broot_bytes <= | 
|  | (XFS_IFORK_SIZE(ip, whichfork) + | 
|  | XFS_BROOT_SIZE_ADJ)); | 
|  | xfs_bmbt_to_bmdr(mp, ifp->if_broot, ifp->if_broot_bytes, | 
|  | (xfs_bmdr_block_t *)cp, | 
|  | XFS_DFORK_SIZE(dip, mp, whichfork)); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case XFS_DINODE_FMT_DEV: | 
|  | if (iip->ili_format.ilf_fields & XFS_ILOG_DEV) { | 
|  | ASSERT(whichfork == XFS_DATA_FORK); | 
|  | xfs_dinode_put_rdev(dip, ip->i_df.if_u2.if_rdev); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case XFS_DINODE_FMT_UUID: | 
|  | if (iip->ili_format.ilf_fields & XFS_ILOG_UUID) { | 
|  | ASSERT(whichfork == XFS_DATA_FORK); | 
|  | memcpy(XFS_DFORK_DPTR(dip), | 
|  | &ip->i_df.if_u2.if_uuid, | 
|  | sizeof(uuid_t)); | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | ASSERT(0); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | STATIC int | 
|  | xfs_iflush_cluster( | 
|  | xfs_inode_t	*ip, | 
|  | xfs_buf_t	*bp) | 
|  | { | 
|  | xfs_mount_t		*mp = ip->i_mount; | 
|  | struct xfs_perag	*pag; | 
|  | unsigned long		first_index, mask; | 
|  | unsigned long		inodes_per_cluster; | 
|  | int			ilist_size; | 
|  | xfs_inode_t		**ilist; | 
|  | xfs_inode_t		*iq; | 
|  | int			nr_found; | 
|  | int			clcount = 0; | 
|  | int			bufwasdelwri; | 
|  | int			i; | 
|  |  | 
|  | pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino)); | 
|  |  | 
|  | inodes_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog; | 
|  | ilist_size = inodes_per_cluster * sizeof(xfs_inode_t *); | 
|  | ilist = kmem_alloc(ilist_size, KM_MAYFAIL|KM_NOFS); | 
|  | if (!ilist) | 
|  | goto out_put; | 
|  |  | 
|  | mask = ~(((XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog)) - 1); | 
|  | first_index = XFS_INO_TO_AGINO(mp, ip->i_ino) & mask; | 
|  | rcu_read_lock(); | 
|  | /* really need a gang lookup range call here */ | 
|  | nr_found = radix_tree_gang_lookup(&pag->pag_ici_root, (void**)ilist, | 
|  | first_index, inodes_per_cluster); | 
|  | if (nr_found == 0) | 
|  | goto out_free; | 
|  |  | 
|  | for (i = 0; i < nr_found; i++) { | 
|  | iq = ilist[i]; | 
|  | if (iq == ip) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * because this is an RCU protected lookup, we could find a | 
|  | * recently freed or even reallocated inode during the lookup. | 
|  | * We need to check under the i_flags_lock for a valid inode | 
|  | * here. Skip it if it is not valid or the wrong inode. | 
|  | */ | 
|  | spin_lock(&ip->i_flags_lock); | 
|  | if (!ip->i_ino || | 
|  | (XFS_INO_TO_AGINO(mp, iq->i_ino) & mask) != first_index) { | 
|  | spin_unlock(&ip->i_flags_lock); | 
|  | continue; | 
|  | } | 
|  | spin_unlock(&ip->i_flags_lock); | 
|  |  | 
|  | /* | 
|  | * Do an un-protected check to see if the inode is dirty and | 
|  | * is a candidate for flushing.  These checks will be repeated | 
|  | * later after the appropriate locks are acquired. | 
|  | */ | 
|  | if (xfs_inode_clean(iq) && xfs_ipincount(iq) == 0) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * Try to get locks.  If any are unavailable or it is pinned, | 
|  | * then this inode cannot be flushed and is skipped. | 
|  | */ | 
|  |  | 
|  | if (!xfs_ilock_nowait(iq, XFS_ILOCK_SHARED)) | 
|  | continue; | 
|  | if (!xfs_iflock_nowait(iq)) { | 
|  | xfs_iunlock(iq, XFS_ILOCK_SHARED); | 
|  | continue; | 
|  | } | 
|  | if (xfs_ipincount(iq)) { | 
|  | xfs_ifunlock(iq); | 
|  | xfs_iunlock(iq, XFS_ILOCK_SHARED); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * arriving here means that this inode can be flushed.  First | 
|  | * re-check that it's dirty before flushing. | 
|  | */ | 
|  | if (!xfs_inode_clean(iq)) { | 
|  | int	error; | 
|  | error = xfs_iflush_int(iq, bp); | 
|  | if (error) { | 
|  | xfs_iunlock(iq, XFS_ILOCK_SHARED); | 
|  | goto cluster_corrupt_out; | 
|  | } | 
|  | clcount++; | 
|  | } else { | 
|  | xfs_ifunlock(iq); | 
|  | } | 
|  | xfs_iunlock(iq, XFS_ILOCK_SHARED); | 
|  | } | 
|  |  | 
|  | if (clcount) { | 
|  | XFS_STATS_INC(xs_icluster_flushcnt); | 
|  | XFS_STATS_ADD(xs_icluster_flushinode, clcount); | 
|  | } | 
|  |  | 
|  | out_free: | 
|  | rcu_read_unlock(); | 
|  | kmem_free(ilist); | 
|  | out_put: | 
|  | xfs_perag_put(pag); | 
|  | return 0; | 
|  |  | 
|  |  | 
|  | cluster_corrupt_out: | 
|  | /* | 
|  | * Corruption detected in the clustering loop.  Invalidate the | 
|  | * inode buffer and shut down the filesystem. | 
|  | */ | 
|  | rcu_read_unlock(); | 
|  | /* | 
|  | * Clean up the buffer.  If it was B_DELWRI, just release it -- | 
|  | * brelse can handle it with no problems.  If not, shut down the | 
|  | * filesystem before releasing the buffer. | 
|  | */ | 
|  | bufwasdelwri = XFS_BUF_ISDELAYWRITE(bp); | 
|  | if (bufwasdelwri) | 
|  | xfs_buf_relse(bp); | 
|  |  | 
|  | xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE); | 
|  |  | 
|  | if (!bufwasdelwri) { | 
|  | /* | 
|  | * Just like incore_relse: if we have b_iodone functions, | 
|  | * mark the buffer as an error and call them.  Otherwise | 
|  | * mark it as stale and brelse. | 
|  | */ | 
|  | if (XFS_BUF_IODONE_FUNC(bp)) { | 
|  | XFS_BUF_UNDONE(bp); | 
|  | XFS_BUF_STALE(bp); | 
|  | XFS_BUF_ERROR(bp,EIO); | 
|  | xfs_buf_ioend(bp, 0); | 
|  | } else { | 
|  | XFS_BUF_STALE(bp); | 
|  | xfs_buf_relse(bp); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Unlocks the flush lock | 
|  | */ | 
|  | xfs_iflush_abort(iq); | 
|  | kmem_free(ilist); | 
|  | xfs_perag_put(pag); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * xfs_iflush() will write a modified inode's changes out to the | 
|  | * inode's on disk home.  The caller must have the inode lock held | 
|  | * in at least shared mode and the inode flush completion must be | 
|  | * active as well.  The inode lock will still be held upon return from | 
|  | * the call and the caller is free to unlock it. | 
|  | * The inode flush will be completed when the inode reaches the disk. | 
|  | * The flags indicate how the inode's buffer should be written out. | 
|  | */ | 
|  | int | 
|  | xfs_iflush( | 
|  | xfs_inode_t		*ip, | 
|  | uint			flags) | 
|  | { | 
|  | xfs_inode_log_item_t	*iip; | 
|  | xfs_buf_t		*bp; | 
|  | xfs_dinode_t		*dip; | 
|  | xfs_mount_t		*mp; | 
|  | int			error; | 
|  |  | 
|  | XFS_STATS_INC(xs_iflush_count); | 
|  |  | 
|  | ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED)); | 
|  | ASSERT(!completion_done(&ip->i_flush)); | 
|  | ASSERT(ip->i_d.di_format != XFS_DINODE_FMT_BTREE || | 
|  | ip->i_d.di_nextents > ip->i_df.if_ext_max); | 
|  |  | 
|  | iip = ip->i_itemp; | 
|  | mp = ip->i_mount; | 
|  |  | 
|  | /* | 
|  | * We can't flush the inode until it is unpinned, so wait for it if we | 
|  | * are allowed to block.  We know no one new can pin it, because we are | 
|  | * holding the inode lock shared and you need to hold it exclusively to | 
|  | * pin the inode. | 
|  | * | 
|  | * If we are not allowed to block, force the log out asynchronously so | 
|  | * that when we come back the inode will be unpinned. If other inodes | 
|  | * in the same cluster are dirty, they will probably write the inode | 
|  | * out for us if they occur after the log force completes. | 
|  | */ | 
|  | if (!(flags & SYNC_WAIT) && xfs_ipincount(ip)) { | 
|  | xfs_iunpin_nowait(ip); | 
|  | xfs_ifunlock(ip); | 
|  | return EAGAIN; | 
|  | } | 
|  | xfs_iunpin_wait(ip); | 
|  |  | 
|  | /* | 
|  | * For stale inodes we cannot rely on the backing buffer remaining | 
|  | * stale in cache for the remaining life of the stale inode and so | 
|  | * xfs_itobp() below may give us a buffer that no longer contains | 
|  | * inodes below. We have to check this after ensuring the inode is | 
|  | * unpinned so that it is safe to reclaim the stale inode after the | 
|  | * flush call. | 
|  | */ | 
|  | if (xfs_iflags_test(ip, XFS_ISTALE)) { | 
|  | xfs_ifunlock(ip); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This may have been unpinned because the filesystem is shutting | 
|  | * down forcibly. If that's the case we must not write this inode | 
|  | * to disk, because the log record didn't make it to disk! | 
|  | */ | 
|  | if (XFS_FORCED_SHUTDOWN(mp)) { | 
|  | ip->i_update_core = 0; | 
|  | if (iip) | 
|  | iip->ili_format.ilf_fields = 0; | 
|  | xfs_ifunlock(ip); | 
|  | return XFS_ERROR(EIO); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Get the buffer containing the on-disk inode. | 
|  | */ | 
|  | error = xfs_itobp(mp, NULL, ip, &dip, &bp, | 
|  | (flags & SYNC_TRYLOCK) ? XBF_TRYLOCK : XBF_LOCK); | 
|  | if (error || !bp) { | 
|  | xfs_ifunlock(ip); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * First flush out the inode that xfs_iflush was called with. | 
|  | */ | 
|  | error = xfs_iflush_int(ip, bp); | 
|  | if (error) | 
|  | goto corrupt_out; | 
|  |  | 
|  | /* | 
|  | * If the buffer is pinned then push on the log now so we won't | 
|  | * get stuck waiting in the write for too long. | 
|  | */ | 
|  | if (XFS_BUF_ISPINNED(bp)) | 
|  | xfs_log_force(mp, 0); | 
|  |  | 
|  | /* | 
|  | * inode clustering: | 
|  | * see if other inodes can be gathered into this write | 
|  | */ | 
|  | error = xfs_iflush_cluster(ip, bp); | 
|  | if (error) | 
|  | goto cluster_corrupt_out; | 
|  |  | 
|  | if (flags & SYNC_WAIT) | 
|  | error = xfs_bwrite(mp, bp); | 
|  | else | 
|  | xfs_bdwrite(mp, bp); | 
|  | return error; | 
|  |  | 
|  | corrupt_out: | 
|  | xfs_buf_relse(bp); | 
|  | xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE); | 
|  | cluster_corrupt_out: | 
|  | /* | 
|  | * Unlocks the flush lock | 
|  | */ | 
|  | xfs_iflush_abort(ip); | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  |  | 
|  |  | 
|  | STATIC int | 
|  | xfs_iflush_int( | 
|  | xfs_inode_t		*ip, | 
|  | xfs_buf_t		*bp) | 
|  | { | 
|  | xfs_inode_log_item_t	*iip; | 
|  | xfs_dinode_t		*dip; | 
|  | xfs_mount_t		*mp; | 
|  | #ifdef XFS_TRANS_DEBUG | 
|  | int			first; | 
|  | #endif | 
|  |  | 
|  | ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED)); | 
|  | ASSERT(!completion_done(&ip->i_flush)); | 
|  | ASSERT(ip->i_d.di_format != XFS_DINODE_FMT_BTREE || | 
|  | ip->i_d.di_nextents > ip->i_df.if_ext_max); | 
|  |  | 
|  | iip = ip->i_itemp; | 
|  | mp = ip->i_mount; | 
|  |  | 
|  | /* set *dip = inode's place in the buffer */ | 
|  | dip = (xfs_dinode_t *)xfs_buf_offset(bp, ip->i_imap.im_boffset); | 
|  |  | 
|  | /* | 
|  | * Clear i_update_core before copying out the data. | 
|  | * This is for coordination with our timestamp updates | 
|  | * that don't hold the inode lock. They will always | 
|  | * update the timestamps BEFORE setting i_update_core, | 
|  | * so if we clear i_update_core after they set it we | 
|  | * are guaranteed to see their updates to the timestamps. | 
|  | * I believe that this depends on strongly ordered memory | 
|  | * semantics, but we have that.  We use the SYNCHRONIZE | 
|  | * macro to make sure that the compiler does not reorder | 
|  | * the i_update_core access below the data copy below. | 
|  | */ | 
|  | ip->i_update_core = 0; | 
|  | SYNCHRONIZE(); | 
|  |  | 
|  | /* | 
|  | * Make sure to get the latest timestamps from the Linux inode. | 
|  | */ | 
|  | xfs_synchronize_times(ip); | 
|  |  | 
|  | if (XFS_TEST_ERROR(be16_to_cpu(dip->di_magic) != XFS_DINODE_MAGIC, | 
|  | mp, XFS_ERRTAG_IFLUSH_1, XFS_RANDOM_IFLUSH_1)) { | 
|  | xfs_alert_tag(mp, XFS_PTAG_IFLUSH, | 
|  | "%s: Bad inode %Lu magic number 0x%x, ptr 0x%p", | 
|  | __func__, ip->i_ino, be16_to_cpu(dip->di_magic), dip); | 
|  | goto corrupt_out; | 
|  | } | 
|  | if (XFS_TEST_ERROR(ip->i_d.di_magic != XFS_DINODE_MAGIC, | 
|  | mp, XFS_ERRTAG_IFLUSH_2, XFS_RANDOM_IFLUSH_2)) { | 
|  | xfs_alert_tag(mp, XFS_PTAG_IFLUSH, | 
|  | "%s: Bad inode %Lu, ptr 0x%p, magic number 0x%x", | 
|  | __func__, ip->i_ino, ip, ip->i_d.di_magic); | 
|  | goto corrupt_out; | 
|  | } | 
|  | if ((ip->i_d.di_mode & S_IFMT) == S_IFREG) { | 
|  | if (XFS_TEST_ERROR( | 
|  | (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS) && | 
|  | (ip->i_d.di_format != XFS_DINODE_FMT_BTREE), | 
|  | mp, XFS_ERRTAG_IFLUSH_3, XFS_RANDOM_IFLUSH_3)) { | 
|  | xfs_alert_tag(mp, XFS_PTAG_IFLUSH, | 
|  | "%s: Bad regular inode %Lu, ptr 0x%p", | 
|  | __func__, ip->i_ino, ip); | 
|  | goto corrupt_out; | 
|  | } | 
|  | } else if ((ip->i_d.di_mode & S_IFMT) == S_IFDIR) { | 
|  | if (XFS_TEST_ERROR( | 
|  | (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS) && | 
|  | (ip->i_d.di_format != XFS_DINODE_FMT_BTREE) && | 
|  | (ip->i_d.di_format != XFS_DINODE_FMT_LOCAL), | 
|  | mp, XFS_ERRTAG_IFLUSH_4, XFS_RANDOM_IFLUSH_4)) { | 
|  | xfs_alert_tag(mp, XFS_PTAG_IFLUSH, | 
|  | "%s: Bad directory inode %Lu, ptr 0x%p", | 
|  | __func__, ip->i_ino, ip); | 
|  | goto corrupt_out; | 
|  | } | 
|  | } | 
|  | if (XFS_TEST_ERROR(ip->i_d.di_nextents + ip->i_d.di_anextents > | 
|  | ip->i_d.di_nblocks, mp, XFS_ERRTAG_IFLUSH_5, | 
|  | XFS_RANDOM_IFLUSH_5)) { | 
|  | xfs_alert_tag(mp, XFS_PTAG_IFLUSH, | 
|  | "%s: detected corrupt incore inode %Lu, " | 
|  | "total extents = %d, nblocks = %Ld, ptr 0x%p", | 
|  | __func__, ip->i_ino, | 
|  | ip->i_d.di_nextents + ip->i_d.di_anextents, | 
|  | ip->i_d.di_nblocks, ip); | 
|  | goto corrupt_out; | 
|  | } | 
|  | if (XFS_TEST_ERROR(ip->i_d.di_forkoff > mp->m_sb.sb_inodesize, | 
|  | mp, XFS_ERRTAG_IFLUSH_6, XFS_RANDOM_IFLUSH_6)) { | 
|  | xfs_alert_tag(mp, XFS_PTAG_IFLUSH, | 
|  | "%s: bad inode %Lu, forkoff 0x%x, ptr 0x%p", | 
|  | __func__, ip->i_ino, ip->i_d.di_forkoff, ip); | 
|  | goto corrupt_out; | 
|  | } | 
|  | /* | 
|  | * bump the flush iteration count, used to detect flushes which | 
|  | * postdate a log record during recovery. | 
|  | */ | 
|  |  | 
|  | ip->i_d.di_flushiter++; | 
|  |  | 
|  | /* | 
|  | * Copy the dirty parts of the inode into the on-disk | 
|  | * inode.  We always copy out the core of the inode, | 
|  | * because if the inode is dirty at all the core must | 
|  | * be. | 
|  | */ | 
|  | xfs_dinode_to_disk(dip, &ip->i_d); | 
|  |  | 
|  | /* Wrap, we never let the log put out DI_MAX_FLUSH */ | 
|  | if (ip->i_d.di_flushiter == DI_MAX_FLUSH) | 
|  | ip->i_d.di_flushiter = 0; | 
|  |  | 
|  | /* | 
|  | * If this is really an old format inode and the superblock version | 
|  | * has not been updated to support only new format inodes, then | 
|  | * convert back to the old inode format.  If the superblock version | 
|  | * has been updated, then make the conversion permanent. | 
|  | */ | 
|  | ASSERT(ip->i_d.di_version == 1 || xfs_sb_version_hasnlink(&mp->m_sb)); | 
|  | if (ip->i_d.di_version == 1) { | 
|  | if (!xfs_sb_version_hasnlink(&mp->m_sb)) { | 
|  | /* | 
|  | * Convert it back. | 
|  | */ | 
|  | ASSERT(ip->i_d.di_nlink <= XFS_MAXLINK_1); | 
|  | dip->di_onlink = cpu_to_be16(ip->i_d.di_nlink); | 
|  | } else { | 
|  | /* | 
|  | * The superblock version has already been bumped, | 
|  | * so just make the conversion to the new inode | 
|  | * format permanent. | 
|  | */ | 
|  | ip->i_d.di_version = 2; | 
|  | dip->di_version = 2; | 
|  | ip->i_d.di_onlink = 0; | 
|  | dip->di_onlink = 0; | 
|  | memset(&(ip->i_d.di_pad[0]), 0, sizeof(ip->i_d.di_pad)); | 
|  | memset(&(dip->di_pad[0]), 0, | 
|  | sizeof(dip->di_pad)); | 
|  | ASSERT(xfs_get_projid(ip) == 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | xfs_iflush_fork(ip, dip, iip, XFS_DATA_FORK, bp); | 
|  | if (XFS_IFORK_Q(ip)) | 
|  | xfs_iflush_fork(ip, dip, iip, XFS_ATTR_FORK, bp); | 
|  | xfs_inobp_check(mp, bp); | 
|  |  | 
|  | /* | 
|  | * We've recorded everything logged in the inode, so we'd | 
|  | * like to clear the ilf_fields bits so we don't log and | 
|  | * flush things unnecessarily.  However, we can't stop | 
|  | * logging all this information until the data we've copied | 
|  | * into the disk buffer is written to disk.  If we did we might | 
|  | * overwrite the copy of the inode in the log with all the | 
|  | * data after re-logging only part of it, and in the face of | 
|  | * a crash we wouldn't have all the data we need to recover. | 
|  | * | 
|  | * What we do is move the bits to the ili_last_fields field. | 
|  | * When logging the inode, these bits are moved back to the | 
|  | * ilf_fields field.  In the xfs_iflush_done() routine we | 
|  | * clear ili_last_fields, since we know that the information | 
|  | * those bits represent is permanently on disk.  As long as | 
|  | * the flush completes before the inode is logged again, then | 
|  | * both ilf_fields and ili_last_fields will be cleared. | 
|  | * | 
|  | * We can play with the ilf_fields bits here, because the inode | 
|  | * lock must be held exclusively in order to set bits there | 
|  | * and the flush lock protects the ili_last_fields bits. | 
|  | * Set ili_logged so the flush done | 
|  | * routine can tell whether or not to look in the AIL. | 
|  | * Also, store the current LSN of the inode so that we can tell | 
|  | * whether the item has moved in the AIL from xfs_iflush_done(). | 
|  | * In order to read the lsn we need the AIL lock, because | 
|  | * it is a 64 bit value that cannot be read atomically. | 
|  | */ | 
|  | if (iip != NULL && iip->ili_format.ilf_fields != 0) { | 
|  | iip->ili_last_fields = iip->ili_format.ilf_fields; | 
|  | iip->ili_format.ilf_fields = 0; | 
|  | iip->ili_logged = 1; | 
|  |  | 
|  | xfs_trans_ail_copy_lsn(mp->m_ail, &iip->ili_flush_lsn, | 
|  | &iip->ili_item.li_lsn); | 
|  |  | 
|  | /* | 
|  | * Attach the function xfs_iflush_done to the inode's | 
|  | * buffer.  This will remove the inode from the AIL | 
|  | * and unlock the inode's flush lock when the inode is | 
|  | * completely written to disk. | 
|  | */ | 
|  | xfs_buf_attach_iodone(bp, xfs_iflush_done, &iip->ili_item); | 
|  |  | 
|  | ASSERT(XFS_BUF_FSPRIVATE(bp, void *) != NULL); | 
|  | ASSERT(XFS_BUF_IODONE_FUNC(bp) != NULL); | 
|  | } else { | 
|  | /* | 
|  | * We're flushing an inode which is not in the AIL and has | 
|  | * not been logged but has i_update_core set.  For this | 
|  | * case we can use a B_DELWRI flush and immediately drop | 
|  | * the inode flush lock because we can avoid the whole | 
|  | * AIL state thing.  It's OK to drop the flush lock now, | 
|  | * because we've already locked the buffer and to do anything | 
|  | * you really need both. | 
|  | */ | 
|  | if (iip != NULL) { | 
|  | ASSERT(iip->ili_logged == 0); | 
|  | ASSERT(iip->ili_last_fields == 0); | 
|  | ASSERT((iip->ili_item.li_flags & XFS_LI_IN_AIL) == 0); | 
|  | } | 
|  | xfs_ifunlock(ip); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | corrupt_out: | 
|  | return XFS_ERROR(EFSCORRUPTED); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return a pointer to the extent record at file index idx. | 
|  | */ | 
|  | xfs_bmbt_rec_host_t * | 
|  | xfs_iext_get_ext( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | xfs_extnum_t	idx)		/* index of target extent */ | 
|  | { | 
|  | ASSERT(idx >= 0); | 
|  | ASSERT(idx < ifp->if_bytes / sizeof(xfs_bmbt_rec_t)); | 
|  |  | 
|  | if ((ifp->if_flags & XFS_IFEXTIREC) && (idx == 0)) { | 
|  | return ifp->if_u1.if_ext_irec->er_extbuf; | 
|  | } else if (ifp->if_flags & XFS_IFEXTIREC) { | 
|  | xfs_ext_irec_t	*erp;		/* irec pointer */ | 
|  | int		erp_idx = 0;	/* irec index */ | 
|  | xfs_extnum_t	page_idx = idx;	/* ext index in target list */ | 
|  |  | 
|  | erp = xfs_iext_idx_to_irec(ifp, &page_idx, &erp_idx, 0); | 
|  | return &erp->er_extbuf[page_idx]; | 
|  | } else if (ifp->if_bytes) { | 
|  | return &ifp->if_u1.if_extents[idx]; | 
|  | } else { | 
|  | return NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Insert new item(s) into the extent records for incore inode | 
|  | * fork 'ifp'.  'count' new items are inserted at index 'idx'. | 
|  | */ | 
|  | void | 
|  | xfs_iext_insert( | 
|  | xfs_inode_t	*ip,		/* incore inode pointer */ | 
|  | xfs_extnum_t	idx,		/* starting index of new items */ | 
|  | xfs_extnum_t	count,		/* number of inserted items */ | 
|  | xfs_bmbt_irec_t	*new,		/* items to insert */ | 
|  | int		state)		/* type of extent conversion */ | 
|  | { | 
|  | xfs_ifork_t	*ifp = (state & BMAP_ATTRFORK) ? ip->i_afp : &ip->i_df; | 
|  | xfs_extnum_t	i;		/* extent record index */ | 
|  |  | 
|  | trace_xfs_iext_insert(ip, idx, new, state, _RET_IP_); | 
|  |  | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTENTS); | 
|  | xfs_iext_add(ifp, idx, count); | 
|  | for (i = idx; i < idx + count; i++, new++) | 
|  | xfs_bmbt_set_all(xfs_iext_get_ext(ifp, i), new); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is called when the amount of space required for incore file | 
|  | * extents needs to be increased. The ext_diff parameter stores the | 
|  | * number of new extents being added and the idx parameter contains | 
|  | * the extent index where the new extents will be added. If the new | 
|  | * extents are being appended, then we just need to (re)allocate and | 
|  | * initialize the space. Otherwise, if the new extents are being | 
|  | * inserted into the middle of the existing entries, a bit more work | 
|  | * is required to make room for the new extents to be inserted. The | 
|  | * caller is responsible for filling in the new extent entries upon | 
|  | * return. | 
|  | */ | 
|  | void | 
|  | xfs_iext_add( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | xfs_extnum_t	idx,		/* index to begin adding exts */ | 
|  | int		ext_diff)	/* number of extents to add */ | 
|  | { | 
|  | int		byte_diff;	/* new bytes being added */ | 
|  | int		new_size;	/* size of extents after adding */ | 
|  | xfs_extnum_t	nextents;	/* number of extents in file */ | 
|  |  | 
|  | nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t); | 
|  | ASSERT((idx >= 0) && (idx <= nextents)); | 
|  | byte_diff = ext_diff * sizeof(xfs_bmbt_rec_t); | 
|  | new_size = ifp->if_bytes + byte_diff; | 
|  | /* | 
|  | * If the new number of extents (nextents + ext_diff) | 
|  | * fits inside the inode, then continue to use the inline | 
|  | * extent buffer. | 
|  | */ | 
|  | if (nextents + ext_diff <= XFS_INLINE_EXTS) { | 
|  | if (idx < nextents) { | 
|  | memmove(&ifp->if_u2.if_inline_ext[idx + ext_diff], | 
|  | &ifp->if_u2.if_inline_ext[idx], | 
|  | (nextents - idx) * sizeof(xfs_bmbt_rec_t)); | 
|  | memset(&ifp->if_u2.if_inline_ext[idx], 0, byte_diff); | 
|  | } | 
|  | ifp->if_u1.if_extents = ifp->if_u2.if_inline_ext; | 
|  | ifp->if_real_bytes = 0; | 
|  | } | 
|  | /* | 
|  | * Otherwise use a linear (direct) extent list. | 
|  | * If the extents are currently inside the inode, | 
|  | * xfs_iext_realloc_direct will switch us from | 
|  | * inline to direct extent allocation mode. | 
|  | */ | 
|  | else if (nextents + ext_diff <= XFS_LINEAR_EXTS) { | 
|  | xfs_iext_realloc_direct(ifp, new_size); | 
|  | if (idx < nextents) { | 
|  | memmove(&ifp->if_u1.if_extents[idx + ext_diff], | 
|  | &ifp->if_u1.if_extents[idx], | 
|  | (nextents - idx) * sizeof(xfs_bmbt_rec_t)); | 
|  | memset(&ifp->if_u1.if_extents[idx], 0, byte_diff); | 
|  | } | 
|  | } | 
|  | /* Indirection array */ | 
|  | else { | 
|  | xfs_ext_irec_t	*erp; | 
|  | int		erp_idx = 0; | 
|  | int		page_idx = idx; | 
|  |  | 
|  | ASSERT(nextents + ext_diff > XFS_LINEAR_EXTS); | 
|  | if (ifp->if_flags & XFS_IFEXTIREC) { | 
|  | erp = xfs_iext_idx_to_irec(ifp, &page_idx, &erp_idx, 1); | 
|  | } else { | 
|  | xfs_iext_irec_init(ifp); | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTIREC); | 
|  | erp = ifp->if_u1.if_ext_irec; | 
|  | } | 
|  | /* Extents fit in target extent page */ | 
|  | if (erp && erp->er_extcount + ext_diff <= XFS_LINEAR_EXTS) { | 
|  | if (page_idx < erp->er_extcount) { | 
|  | memmove(&erp->er_extbuf[page_idx + ext_diff], | 
|  | &erp->er_extbuf[page_idx], | 
|  | (erp->er_extcount - page_idx) * | 
|  | sizeof(xfs_bmbt_rec_t)); | 
|  | memset(&erp->er_extbuf[page_idx], 0, byte_diff); | 
|  | } | 
|  | erp->er_extcount += ext_diff; | 
|  | xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, ext_diff); | 
|  | } | 
|  | /* Insert a new extent page */ | 
|  | else if (erp) { | 
|  | xfs_iext_add_indirect_multi(ifp, | 
|  | erp_idx, page_idx, ext_diff); | 
|  | } | 
|  | /* | 
|  | * If extent(s) are being appended to the last page in | 
|  | * the indirection array and the new extent(s) don't fit | 
|  | * in the page, then erp is NULL and erp_idx is set to | 
|  | * the next index needed in the indirection array. | 
|  | */ | 
|  | else { | 
|  | int	count = ext_diff; | 
|  |  | 
|  | while (count) { | 
|  | erp = xfs_iext_irec_new(ifp, erp_idx); | 
|  | erp->er_extcount = count; | 
|  | count -= MIN(count, (int)XFS_LINEAR_EXTS); | 
|  | if (count) { | 
|  | erp_idx++; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | ifp->if_bytes = new_size; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is called when incore extents are being added to the indirection | 
|  | * array and the new extents do not fit in the target extent list. The | 
|  | * erp_idx parameter contains the irec index for the target extent list | 
|  | * in the indirection array, and the idx parameter contains the extent | 
|  | * index within the list. The number of extents being added is stored | 
|  | * in the count parameter. | 
|  | * | 
|  | *    |-------|   |-------| | 
|  | *    |       |   |       |    idx - number of extents before idx | 
|  | *    |  idx  |   | count | | 
|  | *    |       |   |       |    count - number of extents being inserted at idx | 
|  | *    |-------|   |-------| | 
|  | *    | count |   | nex2  |    nex2 - number of extents after idx + count | 
|  | *    |-------|   |-------| | 
|  | */ | 
|  | void | 
|  | xfs_iext_add_indirect_multi( | 
|  | xfs_ifork_t	*ifp,			/* inode fork pointer */ | 
|  | int		erp_idx,		/* target extent irec index */ | 
|  | xfs_extnum_t	idx,			/* index within target list */ | 
|  | int		count)			/* new extents being added */ | 
|  | { | 
|  | int		byte_diff;		/* new bytes being added */ | 
|  | xfs_ext_irec_t	*erp;			/* pointer to irec entry */ | 
|  | xfs_extnum_t	ext_diff;		/* number of extents to add */ | 
|  | xfs_extnum_t	ext_cnt;		/* new extents still needed */ | 
|  | xfs_extnum_t	nex2;			/* extents after idx + count */ | 
|  | xfs_bmbt_rec_t	*nex2_ep = NULL;	/* temp list for nex2 extents */ | 
|  | int		nlists;			/* number of irec's (lists) */ | 
|  |  | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTIREC); | 
|  | erp = &ifp->if_u1.if_ext_irec[erp_idx]; | 
|  | nex2 = erp->er_extcount - idx; | 
|  | nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; | 
|  |  | 
|  | /* | 
|  | * Save second part of target extent list | 
|  | * (all extents past */ | 
|  | if (nex2) { | 
|  | byte_diff = nex2 * sizeof(xfs_bmbt_rec_t); | 
|  | nex2_ep = (xfs_bmbt_rec_t *) kmem_alloc(byte_diff, KM_NOFS); | 
|  | memmove(nex2_ep, &erp->er_extbuf[idx], byte_diff); | 
|  | erp->er_extcount -= nex2; | 
|  | xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, -nex2); | 
|  | memset(&erp->er_extbuf[idx], 0, byte_diff); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Add the new extents to the end of the target | 
|  | * list, then allocate new irec record(s) and | 
|  | * extent buffer(s) as needed to store the rest | 
|  | * of the new extents. | 
|  | */ | 
|  | ext_cnt = count; | 
|  | ext_diff = MIN(ext_cnt, (int)XFS_LINEAR_EXTS - erp->er_extcount); | 
|  | if (ext_diff) { | 
|  | erp->er_extcount += ext_diff; | 
|  | xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, ext_diff); | 
|  | ext_cnt -= ext_diff; | 
|  | } | 
|  | while (ext_cnt) { | 
|  | erp_idx++; | 
|  | erp = xfs_iext_irec_new(ifp, erp_idx); | 
|  | ext_diff = MIN(ext_cnt, (int)XFS_LINEAR_EXTS); | 
|  | erp->er_extcount = ext_diff; | 
|  | xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, ext_diff); | 
|  | ext_cnt -= ext_diff; | 
|  | } | 
|  |  | 
|  | /* Add nex2 extents back to indirection array */ | 
|  | if (nex2) { | 
|  | xfs_extnum_t	ext_avail; | 
|  | int		i; | 
|  |  | 
|  | byte_diff = nex2 * sizeof(xfs_bmbt_rec_t); | 
|  | ext_avail = XFS_LINEAR_EXTS - erp->er_extcount; | 
|  | i = 0; | 
|  | /* | 
|  | * If nex2 extents fit in the current page, append | 
|  | * nex2_ep after the new extents. | 
|  | */ | 
|  | if (nex2 <= ext_avail) { | 
|  | i = erp->er_extcount; | 
|  | } | 
|  | /* | 
|  | * Otherwise, check if space is available in the | 
|  | * next page. | 
|  | */ | 
|  | else if ((erp_idx < nlists - 1) && | 
|  | (nex2 <= (ext_avail = XFS_LINEAR_EXTS - | 
|  | ifp->if_u1.if_ext_irec[erp_idx+1].er_extcount))) { | 
|  | erp_idx++; | 
|  | erp++; | 
|  | /* Create a hole for nex2 extents */ | 
|  | memmove(&erp->er_extbuf[nex2], erp->er_extbuf, | 
|  | erp->er_extcount * sizeof(xfs_bmbt_rec_t)); | 
|  | } | 
|  | /* | 
|  | * Final choice, create a new extent page for | 
|  | * nex2 extents. | 
|  | */ | 
|  | else { | 
|  | erp_idx++; | 
|  | erp = xfs_iext_irec_new(ifp, erp_idx); | 
|  | } | 
|  | memmove(&erp->er_extbuf[i], nex2_ep, byte_diff); | 
|  | kmem_free(nex2_ep); | 
|  | erp->er_extcount += nex2; | 
|  | xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, nex2); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is called when the amount of space required for incore file | 
|  | * extents needs to be decreased. The ext_diff parameter stores the | 
|  | * number of extents to be removed and the idx parameter contains | 
|  | * the extent index where the extents will be removed from. | 
|  | * | 
|  | * If the amount of space needed has decreased below the linear | 
|  | * limit, XFS_IEXT_BUFSZ, then switch to using the contiguous | 
|  | * extent array.  Otherwise, use kmem_realloc() to adjust the | 
|  | * size to what is needed. | 
|  | */ | 
|  | void | 
|  | xfs_iext_remove( | 
|  | xfs_inode_t	*ip,		/* incore inode pointer */ | 
|  | xfs_extnum_t	idx,		/* index to begin removing exts */ | 
|  | int		ext_diff,	/* number of extents to remove */ | 
|  | int		state)		/* type of extent conversion */ | 
|  | { | 
|  | xfs_ifork_t	*ifp = (state & BMAP_ATTRFORK) ? ip->i_afp : &ip->i_df; | 
|  | xfs_extnum_t	nextents;	/* number of extents in file */ | 
|  | int		new_size;	/* size of extents after removal */ | 
|  |  | 
|  | trace_xfs_iext_remove(ip, idx, state, _RET_IP_); | 
|  |  | 
|  | ASSERT(ext_diff > 0); | 
|  | nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t); | 
|  | new_size = (nextents - ext_diff) * sizeof(xfs_bmbt_rec_t); | 
|  |  | 
|  | if (new_size == 0) { | 
|  | xfs_iext_destroy(ifp); | 
|  | } else if (ifp->if_flags & XFS_IFEXTIREC) { | 
|  | xfs_iext_remove_indirect(ifp, idx, ext_diff); | 
|  | } else if (ifp->if_real_bytes) { | 
|  | xfs_iext_remove_direct(ifp, idx, ext_diff); | 
|  | } else { | 
|  | xfs_iext_remove_inline(ifp, idx, ext_diff); | 
|  | } | 
|  | ifp->if_bytes = new_size; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This removes ext_diff extents from the inline buffer, beginning | 
|  | * at extent index idx. | 
|  | */ | 
|  | void | 
|  | xfs_iext_remove_inline( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | xfs_extnum_t	idx,		/* index to begin removing exts */ | 
|  | int		ext_diff)	/* number of extents to remove */ | 
|  | { | 
|  | int		nextents;	/* number of extents in file */ | 
|  |  | 
|  | ASSERT(!(ifp->if_flags & XFS_IFEXTIREC)); | 
|  | ASSERT(idx < XFS_INLINE_EXTS); | 
|  | nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t); | 
|  | ASSERT(((nextents - ext_diff) > 0) && | 
|  | (nextents - ext_diff) < XFS_INLINE_EXTS); | 
|  |  | 
|  | if (idx + ext_diff < nextents) { | 
|  | memmove(&ifp->if_u2.if_inline_ext[idx], | 
|  | &ifp->if_u2.if_inline_ext[idx + ext_diff], | 
|  | (nextents - (idx + ext_diff)) * | 
|  | sizeof(xfs_bmbt_rec_t)); | 
|  | memset(&ifp->if_u2.if_inline_ext[nextents - ext_diff], | 
|  | 0, ext_diff * sizeof(xfs_bmbt_rec_t)); | 
|  | } else { | 
|  | memset(&ifp->if_u2.if_inline_ext[idx], 0, | 
|  | ext_diff * sizeof(xfs_bmbt_rec_t)); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This removes ext_diff extents from a linear (direct) extent list, | 
|  | * beginning at extent index idx. If the extents are being removed | 
|  | * from the end of the list (ie. truncate) then we just need to re- | 
|  | * allocate the list to remove the extra space. Otherwise, if the | 
|  | * extents are being removed from the middle of the existing extent | 
|  | * entries, then we first need to move the extent records beginning | 
|  | * at idx + ext_diff up in the list to overwrite the records being | 
|  | * removed, then remove the extra space via kmem_realloc. | 
|  | */ | 
|  | void | 
|  | xfs_iext_remove_direct( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | xfs_extnum_t	idx,		/* index to begin removing exts */ | 
|  | int		ext_diff)	/* number of extents to remove */ | 
|  | { | 
|  | xfs_extnum_t	nextents;	/* number of extents in file */ | 
|  | int		new_size;	/* size of extents after removal */ | 
|  |  | 
|  | ASSERT(!(ifp->if_flags & XFS_IFEXTIREC)); | 
|  | new_size = ifp->if_bytes - | 
|  | (ext_diff * sizeof(xfs_bmbt_rec_t)); | 
|  | nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t); | 
|  |  | 
|  | if (new_size == 0) { | 
|  | xfs_iext_destroy(ifp); | 
|  | return; | 
|  | } | 
|  | /* Move extents up in the list (if needed) */ | 
|  | if (idx + ext_diff < nextents) { | 
|  | memmove(&ifp->if_u1.if_extents[idx], | 
|  | &ifp->if_u1.if_extents[idx + ext_diff], | 
|  | (nextents - (idx + ext_diff)) * | 
|  | sizeof(xfs_bmbt_rec_t)); | 
|  | } | 
|  | memset(&ifp->if_u1.if_extents[nextents - ext_diff], | 
|  | 0, ext_diff * sizeof(xfs_bmbt_rec_t)); | 
|  | /* | 
|  | * Reallocate the direct extent list. If the extents | 
|  | * will fit inside the inode then xfs_iext_realloc_direct | 
|  | * will switch from direct to inline extent allocation | 
|  | * mode for us. | 
|  | */ | 
|  | xfs_iext_realloc_direct(ifp, new_size); | 
|  | ifp->if_bytes = new_size; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is called when incore extents are being removed from the | 
|  | * indirection array and the extents being removed span multiple extent | 
|  | * buffers. The idx parameter contains the file extent index where we | 
|  | * want to begin removing extents, and the count parameter contains | 
|  | * how many extents need to be removed. | 
|  | * | 
|  | *    |-------|   |-------| | 
|  | *    | nex1  |   |       |    nex1 - number of extents before idx | 
|  | *    |-------|   | count | | 
|  | *    |       |   |       |    count - number of extents being removed at idx | 
|  | *    | count |   |-------| | 
|  | *    |       |   | nex2  |    nex2 - number of extents after idx + count | 
|  | *    |-------|   |-------| | 
|  | */ | 
|  | void | 
|  | xfs_iext_remove_indirect( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | xfs_extnum_t	idx,		/* index to begin removing extents */ | 
|  | int		count)		/* number of extents to remove */ | 
|  | { | 
|  | xfs_ext_irec_t	*erp;		/* indirection array pointer */ | 
|  | int		erp_idx = 0;	/* indirection array index */ | 
|  | xfs_extnum_t	ext_cnt;	/* extents left to remove */ | 
|  | xfs_extnum_t	ext_diff;	/* extents to remove in current list */ | 
|  | xfs_extnum_t	nex1;		/* number of extents before idx */ | 
|  | xfs_extnum_t	nex2;		/* extents after idx + count */ | 
|  | int		page_idx = idx;	/* index in target extent list */ | 
|  |  | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTIREC); | 
|  | erp = xfs_iext_idx_to_irec(ifp,  &page_idx, &erp_idx, 0); | 
|  | ASSERT(erp != NULL); | 
|  | nex1 = page_idx; | 
|  | ext_cnt = count; | 
|  | while (ext_cnt) { | 
|  | nex2 = MAX((erp->er_extcount - (nex1 + ext_cnt)), 0); | 
|  | ext_diff = MIN(ext_cnt, (erp->er_extcount - nex1)); | 
|  | /* | 
|  | * Check for deletion of entire list; | 
|  | * xfs_iext_irec_remove() updates extent offsets. | 
|  | */ | 
|  | if (ext_diff == erp->er_extcount) { | 
|  | xfs_iext_irec_remove(ifp, erp_idx); | 
|  | ext_cnt -= ext_diff; | 
|  | nex1 = 0; | 
|  | if (ext_cnt) { | 
|  | ASSERT(erp_idx < ifp->if_real_bytes / | 
|  | XFS_IEXT_BUFSZ); | 
|  | erp = &ifp->if_u1.if_ext_irec[erp_idx]; | 
|  | nex1 = 0; | 
|  | continue; | 
|  | } else { | 
|  | break; | 
|  | } | 
|  | } | 
|  | /* Move extents up (if needed) */ | 
|  | if (nex2) { | 
|  | memmove(&erp->er_extbuf[nex1], | 
|  | &erp->er_extbuf[nex1 + ext_diff], | 
|  | nex2 * sizeof(xfs_bmbt_rec_t)); | 
|  | } | 
|  | /* Zero out rest of page */ | 
|  | memset(&erp->er_extbuf[nex1 + nex2], 0, (XFS_IEXT_BUFSZ - | 
|  | ((nex1 + nex2) * sizeof(xfs_bmbt_rec_t)))); | 
|  | /* Update remaining counters */ | 
|  | erp->er_extcount -= ext_diff; | 
|  | xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, -ext_diff); | 
|  | ext_cnt -= ext_diff; | 
|  | nex1 = 0; | 
|  | erp_idx++; | 
|  | erp++; | 
|  | } | 
|  | ifp->if_bytes -= count * sizeof(xfs_bmbt_rec_t); | 
|  | xfs_iext_irec_compact(ifp); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Create, destroy, or resize a linear (direct) block of extents. | 
|  | */ | 
|  | void | 
|  | xfs_iext_realloc_direct( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | int		new_size)	/* new size of extents */ | 
|  | { | 
|  | int		rnew_size;	/* real new size of extents */ | 
|  |  | 
|  | rnew_size = new_size; | 
|  |  | 
|  | ASSERT(!(ifp->if_flags & XFS_IFEXTIREC) || | 
|  | ((new_size >= 0) && (new_size <= XFS_IEXT_BUFSZ) && | 
|  | (new_size != ifp->if_real_bytes))); | 
|  |  | 
|  | /* Free extent records */ | 
|  | if (new_size == 0) { | 
|  | xfs_iext_destroy(ifp); | 
|  | } | 
|  | /* Resize direct extent list and zero any new bytes */ | 
|  | else if (ifp->if_real_bytes) { | 
|  | /* Check if extents will fit inside the inode */ | 
|  | if (new_size <= XFS_INLINE_EXTS * sizeof(xfs_bmbt_rec_t)) { | 
|  | xfs_iext_direct_to_inline(ifp, new_size / | 
|  | (uint)sizeof(xfs_bmbt_rec_t)); | 
|  | ifp->if_bytes = new_size; | 
|  | return; | 
|  | } | 
|  | if (!is_power_of_2(new_size)){ | 
|  | rnew_size = roundup_pow_of_two(new_size); | 
|  | } | 
|  | if (rnew_size != ifp->if_real_bytes) { | 
|  | ifp->if_u1.if_extents = | 
|  | kmem_realloc(ifp->if_u1.if_extents, | 
|  | rnew_size, | 
|  | ifp->if_real_bytes, KM_NOFS); | 
|  | } | 
|  | if (rnew_size > ifp->if_real_bytes) { | 
|  | memset(&ifp->if_u1.if_extents[ifp->if_bytes / | 
|  | (uint)sizeof(xfs_bmbt_rec_t)], 0, | 
|  | rnew_size - ifp->if_real_bytes); | 
|  | } | 
|  | } | 
|  | /* | 
|  | * Switch from the inline extent buffer to a direct | 
|  | * extent list. Be sure to include the inline extent | 
|  | * bytes in new_size. | 
|  | */ | 
|  | else { | 
|  | new_size += ifp->if_bytes; | 
|  | if (!is_power_of_2(new_size)) { | 
|  | rnew_size = roundup_pow_of_two(new_size); | 
|  | } | 
|  | xfs_iext_inline_to_direct(ifp, rnew_size); | 
|  | } | 
|  | ifp->if_real_bytes = rnew_size; | 
|  | ifp->if_bytes = new_size; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Switch from linear (direct) extent records to inline buffer. | 
|  | */ | 
|  | void | 
|  | xfs_iext_direct_to_inline( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | xfs_extnum_t	nextents)	/* number of extents in file */ | 
|  | { | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTENTS); | 
|  | ASSERT(nextents <= XFS_INLINE_EXTS); | 
|  | /* | 
|  | * The inline buffer was zeroed when we switched | 
|  | * from inline to direct extent allocation mode, | 
|  | * so we don't need to clear it here. | 
|  | */ | 
|  | memcpy(ifp->if_u2.if_inline_ext, ifp->if_u1.if_extents, | 
|  | nextents * sizeof(xfs_bmbt_rec_t)); | 
|  | kmem_free(ifp->if_u1.if_extents); | 
|  | ifp->if_u1.if_extents = ifp->if_u2.if_inline_ext; | 
|  | ifp->if_real_bytes = 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Switch from inline buffer to linear (direct) extent records. | 
|  | * new_size should already be rounded up to the next power of 2 | 
|  | * by the caller (when appropriate), so use new_size as it is. | 
|  | * However, since new_size may be rounded up, we can't update | 
|  | * if_bytes here. It is the caller's responsibility to update | 
|  | * if_bytes upon return. | 
|  | */ | 
|  | void | 
|  | xfs_iext_inline_to_direct( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | int		new_size)	/* number of extents in file */ | 
|  | { | 
|  | ifp->if_u1.if_extents = kmem_alloc(new_size, KM_NOFS); | 
|  | memset(ifp->if_u1.if_extents, 0, new_size); | 
|  | if (ifp->if_bytes) { | 
|  | memcpy(ifp->if_u1.if_extents, ifp->if_u2.if_inline_ext, | 
|  | ifp->if_bytes); | 
|  | memset(ifp->if_u2.if_inline_ext, 0, XFS_INLINE_EXTS * | 
|  | sizeof(xfs_bmbt_rec_t)); | 
|  | } | 
|  | ifp->if_real_bytes = new_size; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Resize an extent indirection array to new_size bytes. | 
|  | */ | 
|  | STATIC void | 
|  | xfs_iext_realloc_indirect( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | int		new_size)	/* new indirection array size */ | 
|  | { | 
|  | int		nlists;		/* number of irec's (ex lists) */ | 
|  | int		size;		/* current indirection array size */ | 
|  |  | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTIREC); | 
|  | nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; | 
|  | size = nlists * sizeof(xfs_ext_irec_t); | 
|  | ASSERT(ifp->if_real_bytes); | 
|  | ASSERT((new_size >= 0) && (new_size != size)); | 
|  | if (new_size == 0) { | 
|  | xfs_iext_destroy(ifp); | 
|  | } else { | 
|  | ifp->if_u1.if_ext_irec = (xfs_ext_irec_t *) | 
|  | kmem_realloc(ifp->if_u1.if_ext_irec, | 
|  | new_size, size, KM_NOFS); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Switch from indirection array to linear (direct) extent allocations. | 
|  | */ | 
|  | STATIC void | 
|  | xfs_iext_indirect_to_direct( | 
|  | xfs_ifork_t	*ifp)		/* inode fork pointer */ | 
|  | { | 
|  | xfs_bmbt_rec_host_t *ep;	/* extent record pointer */ | 
|  | xfs_extnum_t	nextents;	/* number of extents in file */ | 
|  | int		size;		/* size of file extents */ | 
|  |  | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTIREC); | 
|  | nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t); | 
|  | ASSERT(nextents <= XFS_LINEAR_EXTS); | 
|  | size = nextents * sizeof(xfs_bmbt_rec_t); | 
|  |  | 
|  | xfs_iext_irec_compact_pages(ifp); | 
|  | ASSERT(ifp->if_real_bytes == XFS_IEXT_BUFSZ); | 
|  |  | 
|  | ep = ifp->if_u1.if_ext_irec->er_extbuf; | 
|  | kmem_free(ifp->if_u1.if_ext_irec); | 
|  | ifp->if_flags &= ~XFS_IFEXTIREC; | 
|  | ifp->if_u1.if_extents = ep; | 
|  | ifp->if_bytes = size; | 
|  | if (nextents < XFS_LINEAR_EXTS) { | 
|  | xfs_iext_realloc_direct(ifp, size); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Free incore file extents. | 
|  | */ | 
|  | void | 
|  | xfs_iext_destroy( | 
|  | xfs_ifork_t	*ifp)		/* inode fork pointer */ | 
|  | { | 
|  | if (ifp->if_flags & XFS_IFEXTIREC) { | 
|  | int	erp_idx; | 
|  | int	nlists; | 
|  |  | 
|  | nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; | 
|  | for (erp_idx = nlists - 1; erp_idx >= 0 ; erp_idx--) { | 
|  | xfs_iext_irec_remove(ifp, erp_idx); | 
|  | } | 
|  | ifp->if_flags &= ~XFS_IFEXTIREC; | 
|  | } else if (ifp->if_real_bytes) { | 
|  | kmem_free(ifp->if_u1.if_extents); | 
|  | } else if (ifp->if_bytes) { | 
|  | memset(ifp->if_u2.if_inline_ext, 0, XFS_INLINE_EXTS * | 
|  | sizeof(xfs_bmbt_rec_t)); | 
|  | } | 
|  | ifp->if_u1.if_extents = NULL; | 
|  | ifp->if_real_bytes = 0; | 
|  | ifp->if_bytes = 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return a pointer to the extent record for file system block bno. | 
|  | */ | 
|  | xfs_bmbt_rec_host_t *			/* pointer to found extent record */ | 
|  | xfs_iext_bno_to_ext( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | xfs_fileoff_t	bno,		/* block number to search for */ | 
|  | xfs_extnum_t	*idxp)		/* index of target extent */ | 
|  | { | 
|  | xfs_bmbt_rec_host_t *base;	/* pointer to first extent */ | 
|  | xfs_filblks_t	blockcount = 0;	/* number of blocks in extent */ | 
|  | xfs_bmbt_rec_host_t *ep = NULL;	/* pointer to target extent */ | 
|  | xfs_ext_irec_t	*erp = NULL;	/* indirection array pointer */ | 
|  | int		high;		/* upper boundary in search */ | 
|  | xfs_extnum_t	idx = 0;	/* index of target extent */ | 
|  | int		low;		/* lower boundary in search */ | 
|  | xfs_extnum_t	nextents;	/* number of file extents */ | 
|  | xfs_fileoff_t	startoff = 0;	/* start offset of extent */ | 
|  |  | 
|  | nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t); | 
|  | if (nextents == 0) { | 
|  | *idxp = 0; | 
|  | return NULL; | 
|  | } | 
|  | low = 0; | 
|  | if (ifp->if_flags & XFS_IFEXTIREC) { | 
|  | /* Find target extent list */ | 
|  | int	erp_idx = 0; | 
|  | erp = xfs_iext_bno_to_irec(ifp, bno, &erp_idx); | 
|  | base = erp->er_extbuf; | 
|  | high = erp->er_extcount - 1; | 
|  | } else { | 
|  | base = ifp->if_u1.if_extents; | 
|  | high = nextents - 1; | 
|  | } | 
|  | /* Binary search extent records */ | 
|  | while (low <= high) { | 
|  | idx = (low + high) >> 1; | 
|  | ep = base + idx; | 
|  | startoff = xfs_bmbt_get_startoff(ep); | 
|  | blockcount = xfs_bmbt_get_blockcount(ep); | 
|  | if (bno < startoff) { | 
|  | high = idx - 1; | 
|  | } else if (bno >= startoff + blockcount) { | 
|  | low = idx + 1; | 
|  | } else { | 
|  | /* Convert back to file-based extent index */ | 
|  | if (ifp->if_flags & XFS_IFEXTIREC) { | 
|  | idx += erp->er_extoff; | 
|  | } | 
|  | *idxp = idx; | 
|  | return ep; | 
|  | } | 
|  | } | 
|  | /* Convert back to file-based extent index */ | 
|  | if (ifp->if_flags & XFS_IFEXTIREC) { | 
|  | idx += erp->er_extoff; | 
|  | } | 
|  | if (bno >= startoff + blockcount) { | 
|  | if (++idx == nextents) { | 
|  | ep = NULL; | 
|  | } else { | 
|  | ep = xfs_iext_get_ext(ifp, idx); | 
|  | } | 
|  | } | 
|  | *idxp = idx; | 
|  | return ep; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return a pointer to the indirection array entry containing the | 
|  | * extent record for filesystem block bno. Store the index of the | 
|  | * target irec in *erp_idxp. | 
|  | */ | 
|  | xfs_ext_irec_t *			/* pointer to found extent record */ | 
|  | xfs_iext_bno_to_irec( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | xfs_fileoff_t	bno,		/* block number to search for */ | 
|  | int		*erp_idxp)	/* irec index of target ext list */ | 
|  | { | 
|  | xfs_ext_irec_t	*erp = NULL;	/* indirection array pointer */ | 
|  | xfs_ext_irec_t	*erp_next;	/* next indirection array entry */ | 
|  | int		erp_idx;	/* indirection array index */ | 
|  | int		nlists;		/* number of extent irec's (lists) */ | 
|  | int		high;		/* binary search upper limit */ | 
|  | int		low;		/* binary search lower limit */ | 
|  |  | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTIREC); | 
|  | nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; | 
|  | erp_idx = 0; | 
|  | low = 0; | 
|  | high = nlists - 1; | 
|  | while (low <= high) { | 
|  | erp_idx = (low + high) >> 1; | 
|  | erp = &ifp->if_u1.if_ext_irec[erp_idx]; | 
|  | erp_next = erp_idx < nlists - 1 ? erp + 1 : NULL; | 
|  | if (bno < xfs_bmbt_get_startoff(erp->er_extbuf)) { | 
|  | high = erp_idx - 1; | 
|  | } else if (erp_next && bno >= | 
|  | xfs_bmbt_get_startoff(erp_next->er_extbuf)) { | 
|  | low = erp_idx + 1; | 
|  | } else { | 
|  | break; | 
|  | } | 
|  | } | 
|  | *erp_idxp = erp_idx; | 
|  | return erp; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return a pointer to the indirection array entry containing the | 
|  | * extent record at file extent index *idxp. Store the index of the | 
|  | * target irec in *erp_idxp and store the page index of the target | 
|  | * extent record in *idxp. | 
|  | */ | 
|  | xfs_ext_irec_t * | 
|  | xfs_iext_idx_to_irec( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | xfs_extnum_t	*idxp,		/* extent index (file -> page) */ | 
|  | int		*erp_idxp,	/* pointer to target irec */ | 
|  | int		realloc)	/* new bytes were just added */ | 
|  | { | 
|  | xfs_ext_irec_t	*prev;		/* pointer to previous irec */ | 
|  | xfs_ext_irec_t	*erp = NULL;	/* pointer to current irec */ | 
|  | int		erp_idx;	/* indirection array index */ | 
|  | int		nlists;		/* number of irec's (ex lists) */ | 
|  | int		high;		/* binary search upper limit */ | 
|  | int		low;		/* binary search lower limit */ | 
|  | xfs_extnum_t	page_idx = *idxp; /* extent index in target list */ | 
|  |  | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTIREC); | 
|  | ASSERT(page_idx >= 0); | 
|  | ASSERT(page_idx <= ifp->if_bytes / sizeof(xfs_bmbt_rec_t)); | 
|  | ASSERT(page_idx < ifp->if_bytes / sizeof(xfs_bmbt_rec_t) || realloc); | 
|  |  | 
|  | nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; | 
|  | erp_idx = 0; | 
|  | low = 0; | 
|  | high = nlists - 1; | 
|  |  | 
|  | /* Binary search extent irec's */ | 
|  | while (low <= high) { | 
|  | erp_idx = (low + high) >> 1; | 
|  | erp = &ifp->if_u1.if_ext_irec[erp_idx]; | 
|  | prev = erp_idx > 0 ? erp - 1 : NULL; | 
|  | if (page_idx < erp->er_extoff || (page_idx == erp->er_extoff && | 
|  | realloc && prev && prev->er_extcount < XFS_LINEAR_EXTS)) { | 
|  | high = erp_idx - 1; | 
|  | } else if (page_idx > erp->er_extoff + erp->er_extcount || | 
|  | (page_idx == erp->er_extoff + erp->er_extcount && | 
|  | !realloc)) { | 
|  | low = erp_idx + 1; | 
|  | } else if (page_idx == erp->er_extoff + erp->er_extcount && | 
|  | erp->er_extcount == XFS_LINEAR_EXTS) { | 
|  | ASSERT(realloc); | 
|  | page_idx = 0; | 
|  | erp_idx++; | 
|  | erp = erp_idx < nlists ? erp + 1 : NULL; | 
|  | break; | 
|  | } else { | 
|  | page_idx -= erp->er_extoff; | 
|  | break; | 
|  | } | 
|  | } | 
|  | *idxp = page_idx; | 
|  | *erp_idxp = erp_idx; | 
|  | return(erp); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allocate and initialize an indirection array once the space needed | 
|  | * for incore extents increases above XFS_IEXT_BUFSZ. | 
|  | */ | 
|  | void | 
|  | xfs_iext_irec_init( | 
|  | xfs_ifork_t	*ifp)		/* inode fork pointer */ | 
|  | { | 
|  | xfs_ext_irec_t	*erp;		/* indirection array pointer */ | 
|  | xfs_extnum_t	nextents;	/* number of extents in file */ | 
|  |  | 
|  | ASSERT(!(ifp->if_flags & XFS_IFEXTIREC)); | 
|  | nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t); | 
|  | ASSERT(nextents <= XFS_LINEAR_EXTS); | 
|  |  | 
|  | erp = kmem_alloc(sizeof(xfs_ext_irec_t), KM_NOFS); | 
|  |  | 
|  | if (nextents == 0) { | 
|  | ifp->if_u1.if_extents = kmem_alloc(XFS_IEXT_BUFSZ, KM_NOFS); | 
|  | } else if (!ifp->if_real_bytes) { | 
|  | xfs_iext_inline_to_direct(ifp, XFS_IEXT_BUFSZ); | 
|  | } else if (ifp->if_real_bytes < XFS_IEXT_BUFSZ) { | 
|  | xfs_iext_realloc_direct(ifp, XFS_IEXT_BUFSZ); | 
|  | } | 
|  | erp->er_extbuf = ifp->if_u1.if_extents; | 
|  | erp->er_extcount = nextents; | 
|  | erp->er_extoff = 0; | 
|  |  | 
|  | ifp->if_flags |= XFS_IFEXTIREC; | 
|  | ifp->if_real_bytes = XFS_IEXT_BUFSZ; | 
|  | ifp->if_bytes = nextents * sizeof(xfs_bmbt_rec_t); | 
|  | ifp->if_u1.if_ext_irec = erp; | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allocate and initialize a new entry in the indirection array. | 
|  | */ | 
|  | xfs_ext_irec_t * | 
|  | xfs_iext_irec_new( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | int		erp_idx)	/* index for new irec */ | 
|  | { | 
|  | xfs_ext_irec_t	*erp;		/* indirection array pointer */ | 
|  | int		i;		/* loop counter */ | 
|  | int		nlists;		/* number of irec's (ex lists) */ | 
|  |  | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTIREC); | 
|  | nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; | 
|  |  | 
|  | /* Resize indirection array */ | 
|  | xfs_iext_realloc_indirect(ifp, ++nlists * | 
|  | sizeof(xfs_ext_irec_t)); | 
|  | /* | 
|  | * Move records down in the array so the | 
|  | * new page can use erp_idx. | 
|  | */ | 
|  | erp = ifp->if_u1.if_ext_irec; | 
|  | for (i = nlists - 1; i > erp_idx; i--) { | 
|  | memmove(&erp[i], &erp[i-1], sizeof(xfs_ext_irec_t)); | 
|  | } | 
|  | ASSERT(i == erp_idx); | 
|  |  | 
|  | /* Initialize new extent record */ | 
|  | erp = ifp->if_u1.if_ext_irec; | 
|  | erp[erp_idx].er_extbuf = kmem_alloc(XFS_IEXT_BUFSZ, KM_NOFS); | 
|  | ifp->if_real_bytes = nlists * XFS_IEXT_BUFSZ; | 
|  | memset(erp[erp_idx].er_extbuf, 0, XFS_IEXT_BUFSZ); | 
|  | erp[erp_idx].er_extcount = 0; | 
|  | erp[erp_idx].er_extoff = erp_idx > 0 ? | 
|  | erp[erp_idx-1].er_extoff + erp[erp_idx-1].er_extcount : 0; | 
|  | return (&erp[erp_idx]); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Remove a record from the indirection array. | 
|  | */ | 
|  | void | 
|  | xfs_iext_irec_remove( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | int		erp_idx)	/* irec index to remove */ | 
|  | { | 
|  | xfs_ext_irec_t	*erp;		/* indirection array pointer */ | 
|  | int		i;		/* loop counter */ | 
|  | int		nlists;		/* number of irec's (ex lists) */ | 
|  |  | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTIREC); | 
|  | nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; | 
|  | erp = &ifp->if_u1.if_ext_irec[erp_idx]; | 
|  | if (erp->er_extbuf) { | 
|  | xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, | 
|  | -erp->er_extcount); | 
|  | kmem_free(erp->er_extbuf); | 
|  | } | 
|  | /* Compact extent records */ | 
|  | erp = ifp->if_u1.if_ext_irec; | 
|  | for (i = erp_idx; i < nlists - 1; i++) { | 
|  | memmove(&erp[i], &erp[i+1], sizeof(xfs_ext_irec_t)); | 
|  | } | 
|  | /* | 
|  | * Manually free the last extent record from the indirection | 
|  | * array.  A call to xfs_iext_realloc_indirect() with a size | 
|  | * of zero would result in a call to xfs_iext_destroy() which | 
|  | * would in turn call this function again, creating a nasty | 
|  | * infinite loop. | 
|  | */ | 
|  | if (--nlists) { | 
|  | xfs_iext_realloc_indirect(ifp, | 
|  | nlists * sizeof(xfs_ext_irec_t)); | 
|  | } else { | 
|  | kmem_free(ifp->if_u1.if_ext_irec); | 
|  | } | 
|  | ifp->if_real_bytes = nlists * XFS_IEXT_BUFSZ; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is called to clean up large amounts of unused memory allocated | 
|  | * by the indirection array.  Before compacting anything though, verify | 
|  | * that the indirection array is still needed and switch back to the | 
|  | * linear extent list (or even the inline buffer) if possible.  The | 
|  | * compaction policy is as follows: | 
|  | * | 
|  | *    Full Compaction: Extents fit into a single page (or inline buffer) | 
|  | * Partial Compaction: Extents occupy less than 50% of allocated space | 
|  | *      No Compaction: Extents occupy at least 50% of allocated space | 
|  | */ | 
|  | void | 
|  | xfs_iext_irec_compact( | 
|  | xfs_ifork_t	*ifp)		/* inode fork pointer */ | 
|  | { | 
|  | xfs_extnum_t	nextents;	/* number of extents in file */ | 
|  | int		nlists;		/* number of irec's (ex lists) */ | 
|  |  | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTIREC); | 
|  | nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; | 
|  | nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t); | 
|  |  | 
|  | if (nextents == 0) { | 
|  | xfs_iext_destroy(ifp); | 
|  | } else if (nextents <= XFS_INLINE_EXTS) { | 
|  | xfs_iext_indirect_to_direct(ifp); | 
|  | xfs_iext_direct_to_inline(ifp, nextents); | 
|  | } else if (nextents <= XFS_LINEAR_EXTS) { | 
|  | xfs_iext_indirect_to_direct(ifp); | 
|  | } else if (nextents < (nlists * XFS_LINEAR_EXTS) >> 1) { | 
|  | xfs_iext_irec_compact_pages(ifp); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Combine extents from neighboring extent pages. | 
|  | */ | 
|  | void | 
|  | xfs_iext_irec_compact_pages( | 
|  | xfs_ifork_t	*ifp)		/* inode fork pointer */ | 
|  | { | 
|  | xfs_ext_irec_t	*erp, *erp_next;/* pointers to irec entries */ | 
|  | int		erp_idx = 0;	/* indirection array index */ | 
|  | int		nlists;		/* number of irec's (ex lists) */ | 
|  |  | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTIREC); | 
|  | nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; | 
|  | while (erp_idx < nlists - 1) { | 
|  | erp = &ifp->if_u1.if_ext_irec[erp_idx]; | 
|  | erp_next = erp + 1; | 
|  | if (erp_next->er_extcount <= | 
|  | (XFS_LINEAR_EXTS - erp->er_extcount)) { | 
|  | memcpy(&erp->er_extbuf[erp->er_extcount], | 
|  | erp_next->er_extbuf, erp_next->er_extcount * | 
|  | sizeof(xfs_bmbt_rec_t)); | 
|  | erp->er_extcount += erp_next->er_extcount; | 
|  | /* | 
|  | * Free page before removing extent record | 
|  | * so er_extoffs don't get modified in | 
|  | * xfs_iext_irec_remove. | 
|  | */ | 
|  | kmem_free(erp_next->er_extbuf); | 
|  | erp_next->er_extbuf = NULL; | 
|  | xfs_iext_irec_remove(ifp, erp_idx + 1); | 
|  | nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; | 
|  | } else { | 
|  | erp_idx++; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is called to update the er_extoff field in the indirection | 
|  | * array when extents have been added or removed from one of the | 
|  | * extent lists. erp_idx contains the irec index to begin updating | 
|  | * at and ext_diff contains the number of extents that were added | 
|  | * or removed. | 
|  | */ | 
|  | void | 
|  | xfs_iext_irec_update_extoffs( | 
|  | xfs_ifork_t	*ifp,		/* inode fork pointer */ | 
|  | int		erp_idx,	/* irec index to update */ | 
|  | int		ext_diff)	/* number of new extents */ | 
|  | { | 
|  | int		i;		/* loop counter */ | 
|  | int		nlists;		/* number of irec's (ex lists */ | 
|  |  | 
|  | ASSERT(ifp->if_flags & XFS_IFEXTIREC); | 
|  | nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; | 
|  | for (i = erp_idx; i < nlists; i++) { | 
|  | ifp->if_u1.if_ext_irec[i].er_extoff += ext_diff; | 
|  | } | 
|  | } |