| /* | 
 |  * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver. | 
 |  * | 
 |  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * Author: Hema HK <hemahk@ti.com> | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/io.h> | 
 | #include <linux/usb/otg.h> | 
 | #include <linux/i2c/twl.h> | 
 | #include <linux/regulator/consumer.h> | 
 | #include <linux/err.h> | 
 | #include <linux/notifier.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/delay.h> | 
 |  | 
 | /* usb register definitions */ | 
 | #define USB_VENDOR_ID_LSB		0x00 | 
 | #define USB_VENDOR_ID_MSB		0x01 | 
 | #define USB_PRODUCT_ID_LSB		0x02 | 
 | #define USB_PRODUCT_ID_MSB		0x03 | 
 | #define USB_VBUS_CTRL_SET		0x04 | 
 | #define USB_VBUS_CTRL_CLR		0x05 | 
 | #define USB_ID_CTRL_SET			0x06 | 
 | #define USB_ID_CTRL_CLR			0x07 | 
 | #define USB_VBUS_INT_SRC		0x08 | 
 | #define USB_VBUS_INT_LATCH_SET		0x09 | 
 | #define USB_VBUS_INT_LATCH_CLR		0x0A | 
 | #define USB_VBUS_INT_EN_LO_SET		0x0B | 
 | #define USB_VBUS_INT_EN_LO_CLR		0x0C | 
 | #define USB_VBUS_INT_EN_HI_SET		0x0D | 
 | #define USB_VBUS_INT_EN_HI_CLR		0x0E | 
 | #define USB_ID_INT_SRC			0x0F | 
 | #define USB_ID_INT_LATCH_SET		0x10 | 
 | #define USB_ID_INT_LATCH_CLR		0x11 | 
 |  | 
 | #define USB_ID_INT_EN_LO_SET		0x12 | 
 | #define USB_ID_INT_EN_LO_CLR		0x13 | 
 | #define USB_ID_INT_EN_HI_SET		0x14 | 
 | #define USB_ID_INT_EN_HI_CLR		0x15 | 
 | #define USB_OTG_ADP_CTRL		0x16 | 
 | #define USB_OTG_ADP_HIGH		0x17 | 
 | #define USB_OTG_ADP_LOW			0x18 | 
 | #define USB_OTG_ADP_RISE		0x19 | 
 | #define USB_OTG_REVISION		0x1A | 
 |  | 
 | /* to be moved to LDO */ | 
 | #define TWL6030_MISC2			0xE5 | 
 | #define TWL6030_CFG_LDO_PD2		0xF5 | 
 | #define TWL6030_BACKUP_REG		0xFA | 
 |  | 
 | #define STS_HW_CONDITIONS		0x21 | 
 |  | 
 | /* In module TWL6030_MODULE_PM_MASTER */ | 
 | #define STS_HW_CONDITIONS		0x21 | 
 | #define STS_USB_ID			BIT(2) | 
 |  | 
 | /* In module TWL6030_MODULE_PM_RECEIVER */ | 
 | #define VUSB_CFG_TRANS			0x71 | 
 | #define VUSB_CFG_STATE			0x72 | 
 | #define VUSB_CFG_VOLTAGE		0x73 | 
 |  | 
 | /* in module TWL6030_MODULE_MAIN_CHARGE */ | 
 |  | 
 | #define CHARGERUSB_CTRL1		0x8 | 
 |  | 
 | #define CONTROLLER_STAT1		0x03 | 
 | #define	VBUS_DET			BIT(2) | 
 |  | 
 | struct twl6030_usb { | 
 | 	struct otg_transceiver	otg; | 
 | 	struct device		*dev; | 
 |  | 
 | 	/* for vbus reporting with irqs disabled */ | 
 | 	spinlock_t		lock; | 
 |  | 
 | 	struct regulator		*usb3v3; | 
 |  | 
 | 	int			irq1; | 
 | 	int			irq2; | 
 | 	u8			linkstat; | 
 | 	u8			asleep; | 
 | 	bool			irq_enabled; | 
 | 	unsigned long		features; | 
 | }; | 
 |  | 
 | #define xceiv_to_twl(x)		container_of((x), struct twl6030_usb, otg) | 
 |  | 
 | /*-------------------------------------------------------------------------*/ | 
 |  | 
 | static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module, | 
 | 						u8 data, u8 address) | 
 | { | 
 | 	int ret = 0; | 
 |  | 
 | 	ret = twl_i2c_write_u8(module, data, address); | 
 | 	if (ret < 0) | 
 | 		dev_err(twl->dev, | 
 | 			"Write[0x%x] Error %d\n", address, ret); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address) | 
 | { | 
 | 	u8 data, ret = 0; | 
 |  | 
 | 	ret = twl_i2c_read_u8(module, &data, address); | 
 | 	if (ret >= 0) | 
 | 		ret = data; | 
 | 	else | 
 | 		dev_err(twl->dev, | 
 | 			"readb[0x%x,0x%x] Error %d\n", | 
 | 					module, address, ret); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /*-------------------------------------------------------------------------*/ | 
 | static int twl6030_set_phy_clk(struct otg_transceiver *x, int on) | 
 | { | 
 | 	struct twl6030_usb *twl; | 
 | 	struct device *dev; | 
 | 	struct twl4030_usb_data *pdata; | 
 |  | 
 | 	twl = xceiv_to_twl(x); | 
 | 	dev  = twl->dev; | 
 | 	pdata = dev->platform_data; | 
 |  | 
 | 	pdata->phy_set_clock(twl->dev, on); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int twl6030_phy_init(struct otg_transceiver *x) | 
 | { | 
 | 	struct twl6030_usb *twl; | 
 | 	struct device *dev; | 
 | 	struct twl4030_usb_data *pdata; | 
 |  | 
 | 	twl = xceiv_to_twl(x); | 
 | 	dev  = twl->dev; | 
 | 	pdata = dev->platform_data; | 
 |  | 
 | 	if (twl->linkstat == USB_EVENT_ID) | 
 | 		pdata->phy_power(twl->dev, 1, 1); | 
 | 	else | 
 | 		pdata->phy_power(twl->dev, 0, 1); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void twl6030_phy_shutdown(struct otg_transceiver *x) | 
 | { | 
 | 	struct twl6030_usb *twl; | 
 | 	struct device *dev; | 
 | 	struct twl4030_usb_data *pdata; | 
 |  | 
 | 	twl = xceiv_to_twl(x); | 
 | 	dev  = twl->dev; | 
 | 	pdata = dev->platform_data; | 
 | 	pdata->phy_power(twl->dev, 0, 0); | 
 | } | 
 |  | 
 | static int twl6030_phy_suspend(struct otg_transceiver *x, int suspend) | 
 | { | 
 | 	struct twl6030_usb *twl = xceiv_to_twl(x); | 
 | 	struct device *dev = twl->dev; | 
 | 	struct twl4030_usb_data *pdata = dev->platform_data; | 
 |  | 
 | 	pdata->phy_suspend(dev, suspend); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int twl6030_start_srp(struct otg_transceiver *x) | 
 | { | 
 | 	struct twl6030_usb *twl = xceiv_to_twl(x); | 
 |  | 
 | 	twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET); | 
 | 	twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET); | 
 |  | 
 | 	mdelay(100); | 
 | 	twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int twl6030_usb_ldo_init(struct twl6030_usb *twl) | 
 | { | 
 | 	char *regulator_name; | 
 |  | 
 | 	if (twl->features & TWL6025_SUBCLASS) | 
 | 		regulator_name = "ldousb"; | 
 | 	else | 
 | 		regulator_name = "vusb"; | 
 |  | 
 | 	/* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */ | 
 | 	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG); | 
 |  | 
 | 	/* Program CFG_LDO_PD2 register and set VUSB bit */ | 
 | 	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2); | 
 |  | 
 | 	/* Program MISC2 register and set bit VUSB_IN_VBAT */ | 
 | 	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2); | 
 |  | 
 | 	twl->usb3v3 = regulator_get(twl->dev, regulator_name); | 
 | 	if (IS_ERR(twl->usb3v3)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */ | 
 | 	twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET); | 
 |  | 
 | 	/* | 
 | 	 * Program the USB_ID_CTRL_SET register to enable GND drive | 
 | 	 * and the ID comparators | 
 | 	 */ | 
 | 	twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t twl6030_usb_vbus_show(struct device *dev, | 
 | 			struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct twl6030_usb *twl = dev_get_drvdata(dev); | 
 | 	unsigned long flags; | 
 | 	int ret = -EINVAL; | 
 |  | 
 | 	spin_lock_irqsave(&twl->lock, flags); | 
 |  | 
 | 	switch (twl->linkstat) { | 
 | 	case USB_EVENT_VBUS: | 
 | 	       ret = snprintf(buf, PAGE_SIZE, "vbus\n"); | 
 | 	       break; | 
 | 	case USB_EVENT_ID: | 
 | 	       ret = snprintf(buf, PAGE_SIZE, "id\n"); | 
 | 	       break; | 
 | 	case USB_EVENT_NONE: | 
 | 	       ret = snprintf(buf, PAGE_SIZE, "none\n"); | 
 | 	       break; | 
 | 	default: | 
 | 	       ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n"); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&twl->lock, flags); | 
 |  | 
 | 	return ret; | 
 | } | 
 | static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL); | 
 |  | 
 | static irqreturn_t twl6030_usb_irq(int irq, void *_twl) | 
 | { | 
 | 	struct twl6030_usb *twl = _twl; | 
 | 	int status; | 
 | 	u8 vbus_state, hw_state; | 
 |  | 
 | 	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); | 
 |  | 
 | 	vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE, | 
 | 						CONTROLLER_STAT1); | 
 | 	if (!(hw_state & STS_USB_ID)) { | 
 | 		if (vbus_state & VBUS_DET) { | 
 | 			regulator_enable(twl->usb3v3); | 
 | 			twl->asleep = 1; | 
 | 			status = USB_EVENT_VBUS; | 
 | 			twl->otg.default_a = false; | 
 | 			twl->otg.state = OTG_STATE_B_IDLE; | 
 | 			twl->linkstat = status; | 
 | 			twl->otg.last_event = status; | 
 | 			atomic_notifier_call_chain(&twl->otg.notifier, | 
 | 						status, twl->otg.gadget); | 
 | 		} else { | 
 | 			status = USB_EVENT_NONE; | 
 | 			twl->linkstat = status; | 
 | 			twl->otg.last_event = status; | 
 | 			atomic_notifier_call_chain(&twl->otg.notifier, | 
 | 						status, twl->otg.gadget); | 
 | 			if (twl->asleep) { | 
 | 				regulator_disable(twl->usb3v3); | 
 | 				twl->asleep = 0; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	sysfs_notify(&twl->dev->kobj, NULL, "vbus"); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) | 
 | { | 
 | 	struct twl6030_usb *twl = _twl; | 
 | 	int status = USB_EVENT_NONE; | 
 | 	u8 hw_state; | 
 |  | 
 | 	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); | 
 |  | 
 | 	if (hw_state & STS_USB_ID) { | 
 |  | 
 | 		regulator_enable(twl->usb3v3); | 
 | 		twl->asleep = 1; | 
 | 		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1); | 
 | 		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, | 
 | 								0x10); | 
 | 		status = USB_EVENT_ID; | 
 | 		twl->otg.default_a = true; | 
 | 		twl->otg.state = OTG_STATE_A_IDLE; | 
 | 		twl->linkstat = status; | 
 | 		twl->otg.last_event = status; | 
 | 		atomic_notifier_call_chain(&twl->otg.notifier, status, | 
 | 							twl->otg.gadget); | 
 | 	} else  { | 
 | 		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, | 
 | 								0x10); | 
 | 		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, | 
 | 								0x1); | 
 | 	} | 
 | 	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int twl6030_set_peripheral(struct otg_transceiver *x, | 
 | 		struct usb_gadget *gadget) | 
 | { | 
 | 	struct twl6030_usb *twl; | 
 |  | 
 | 	if (!x) | 
 | 		return -ENODEV; | 
 |  | 
 | 	twl = xceiv_to_twl(x); | 
 | 	twl->otg.gadget = gadget; | 
 | 	if (!gadget) | 
 | 		twl->otg.state = OTG_STATE_UNDEFINED; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int twl6030_enable_irq(struct otg_transceiver *x) | 
 | { | 
 | 	struct twl6030_usb *twl = xceiv_to_twl(x); | 
 |  | 
 | 	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1); | 
 | 	twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C); | 
 | 	twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C); | 
 |  | 
 | 	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, | 
 | 				REG_INT_MSK_LINE_C); | 
 | 	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, | 
 | 				REG_INT_MSK_STS_C); | 
 | 	twl6030_usb_irq(twl->irq2, twl); | 
 | 	twl6030_usbotg_irq(twl->irq1, twl); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int twl6030_set_vbus(struct otg_transceiver *x, bool enabled) | 
 | { | 
 | 	struct twl6030_usb *twl = xceiv_to_twl(x); | 
 |  | 
 | 	/* | 
 | 	 * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1 | 
 | 	 * register. This enables boost mode. | 
 | 	 */ | 
 | 	if (enabled) | 
 | 		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40, | 
 | 						CHARGERUSB_CTRL1); | 
 | 	 else | 
 | 		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00, | 
 | 						CHARGERUSB_CTRL1); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int twl6030_set_host(struct otg_transceiver *x, struct usb_bus *host) | 
 | { | 
 | 	struct twl6030_usb *twl; | 
 |  | 
 | 	if (!x) | 
 | 		return -ENODEV; | 
 |  | 
 | 	twl = xceiv_to_twl(x); | 
 | 	twl->otg.host = host; | 
 | 	if (!host) | 
 | 		twl->otg.state = OTG_STATE_UNDEFINED; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __devinit twl6030_usb_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct twl6030_usb	*twl; | 
 | 	int			status, err; | 
 | 	struct twl4030_usb_data *pdata; | 
 | 	struct device *dev = &pdev->dev; | 
 | 	pdata = dev->platform_data; | 
 |  | 
 | 	twl = kzalloc(sizeof *twl, GFP_KERNEL); | 
 | 	if (!twl) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	twl->dev		= &pdev->dev; | 
 | 	twl->irq1		= platform_get_irq(pdev, 0); | 
 | 	twl->irq2		= platform_get_irq(pdev, 1); | 
 | 	twl->features		= pdata->features; | 
 | 	twl->otg.dev		= twl->dev; | 
 | 	twl->otg.label		= "twl6030"; | 
 | 	twl->otg.set_host	= twl6030_set_host; | 
 | 	twl->otg.set_peripheral	= twl6030_set_peripheral; | 
 | 	twl->otg.set_vbus	= twl6030_set_vbus; | 
 | 	twl->otg.init		= twl6030_phy_init; | 
 | 	twl->otg.shutdown	= twl6030_phy_shutdown; | 
 | 	twl->otg.set_suspend	= twl6030_phy_suspend; | 
 | 	twl->otg.start_srp	= twl6030_start_srp; | 
 |  | 
 | 	/* init spinlock for workqueue */ | 
 | 	spin_lock_init(&twl->lock); | 
 |  | 
 | 	err = twl6030_usb_ldo_init(twl); | 
 | 	if (err) { | 
 | 		dev_err(&pdev->dev, "ldo init failed\n"); | 
 | 		kfree(twl); | 
 | 		return err; | 
 | 	} | 
 | 	otg_set_transceiver(&twl->otg); | 
 |  | 
 | 	platform_set_drvdata(pdev, twl); | 
 | 	if (device_create_file(&pdev->dev, &dev_attr_vbus)) | 
 | 		dev_warn(&pdev->dev, "could not create sysfs file\n"); | 
 |  | 
 | 	ATOMIC_INIT_NOTIFIER_HEAD(&twl->otg.notifier); | 
 |  | 
 | 	twl->irq_enabled = true; | 
 | 	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq, | 
 | 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, | 
 | 			"twl6030_usb", twl); | 
 | 	if (status < 0) { | 
 | 		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", | 
 | 			twl->irq1, status); | 
 | 		device_remove_file(twl->dev, &dev_attr_vbus); | 
 | 		kfree(twl); | 
 | 		return status; | 
 | 	} | 
 |  | 
 | 	status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq, | 
 | 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, | 
 | 			"twl6030_usb", twl); | 
 | 	if (status < 0) { | 
 | 		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", | 
 | 			twl->irq2, status); | 
 | 		free_irq(twl->irq1, twl); | 
 | 		device_remove_file(twl->dev, &dev_attr_vbus); | 
 | 		kfree(twl); | 
 | 		return status; | 
 | 	} | 
 |  | 
 | 	twl->asleep = 0; | 
 | 	pdata->phy_init(dev); | 
 | 	twl6030_phy_suspend(&twl->otg, 0); | 
 | 	twl6030_enable_irq(&twl->otg); | 
 | 	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __exit twl6030_usb_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct twl6030_usb *twl = platform_get_drvdata(pdev); | 
 |  | 
 | 	struct twl4030_usb_data *pdata; | 
 | 	struct device *dev = &pdev->dev; | 
 | 	pdata = dev->platform_data; | 
 |  | 
 | 	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, | 
 | 		REG_INT_MSK_LINE_C); | 
 | 	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, | 
 | 			REG_INT_MSK_STS_C); | 
 | 	free_irq(twl->irq1, twl); | 
 | 	free_irq(twl->irq2, twl); | 
 | 	regulator_put(twl->usb3v3); | 
 | 	pdata->phy_exit(twl->dev); | 
 | 	device_remove_file(twl->dev, &dev_attr_vbus); | 
 | 	kfree(twl); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver twl6030_usb_driver = { | 
 | 	.probe		= twl6030_usb_probe, | 
 | 	.remove		= __exit_p(twl6030_usb_remove), | 
 | 	.driver		= { | 
 | 		.name	= "twl6030_usb", | 
 | 		.owner	= THIS_MODULE, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init twl6030_usb_init(void) | 
 | { | 
 | 	return platform_driver_register(&twl6030_usb_driver); | 
 | } | 
 | subsys_initcall(twl6030_usb_init); | 
 |  | 
 | static void __exit twl6030_usb_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&twl6030_usb_driver); | 
 | } | 
 | module_exit(twl6030_usb_exit); | 
 |  | 
 | MODULE_ALIAS("platform:twl6030_usb"); | 
 | MODULE_AUTHOR("Hema HK <hemahk@ti.com>"); | 
 | MODULE_DESCRIPTION("TWL6030 USB transceiver driver"); | 
 | MODULE_LICENSE("GPL"); |