blob: 36db5a441ebacda2498fc4cfcc5b0e24d9437a9f [file] [log] [blame]
menuconfig REGULATOR
bool "Voltage and Current Regulator Support"
help
Generic Voltage and Current Regulator support.
This framework is designed to provide a generic interface to voltage
and current regulators within the Linux kernel. It's intended to
provide voltage and current control to client or consumer drivers and
also provide status information to user space applications through a
sysfs interface.
The intention is to allow systems to dynamically control regulator
output in order to save power and prolong battery life. This applies
to both voltage regulators (where voltage output is controllable) and
current sinks (where current output is controllable).
This framework safely compiles out if not selected so that client
drivers can still be used in systems with no software controllable
regulators.
If unsure, say no.
if REGULATOR
config REGULATOR_DEBUG
bool "Regulator debug support"
help
Say yes here to enable debugging support.
config REGULATOR_DUMMY
bool "Provide a dummy regulator if regulator lookups fail"
help
If this option is enabled then when a regulator lookup fails
and the board has not specified that it has provided full
constraints then the regulator core will provide an always
enabled dummy regulator will be provided, allowing consumer
drivers to continue.
A warning will be generated when this substitution is done.
config REGULATOR_FIXED_VOLTAGE
tristate "Fixed voltage regulator support"
help
This driver provides support for fixed voltage regulators,
useful for systems which use a combination of software
managed regulators and simple non-configurable regulators.
config REGULATOR_VIRTUAL_CONSUMER
tristate "Virtual regulator consumer support"
help
This driver provides a virtual consumer for the voltage and
current regulator API which provides sysfs controls for
configuring the supplies requested. This is mainly useful
for test purposes.
If unsure, say no.
config REGULATOR_USERSPACE_CONSUMER
tristate "Userspace regulator consumer support"
help
There are some classes of devices that are controlled entirely
from user space. Userspace consumer driver provides ability to
control power supplies for such devices.
If unsure, say no.
config REGULATOR_GPIO
tristate "GPIO regulator support"
depends on GENERIC_GPIO
help
This driver provides support for regulators that can be
controlled via gpios.
It is capable of supporting current and voltage regulators
and the platform has to provide a mapping of GPIO-states
to target volts/amps.
config REGULATOR_AD5398
tristate "Analog Devices AD5398/AD5821 regulators"
depends on I2C
help
This driver supports AD5398 and AD5821 current regulator chips.
If building into module, its name is ad5398.ko.
config REGULATOR_AAT2870
tristate "AnalogicTech AAT2870 Regulators"
depends on MFD_AAT2870_CORE
help
If you have a AnalogicTech AAT2870 say Y to enable the
regulator driver.
config REGULATOR_DA903X
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
depends on PMIC_DA903X
help
Say y here to support the BUCKs and LDOs regulators found on
Dialog Semiconductor DA9030/DA9034 PMIC.
config REGULATOR_DA9052
tristate "Dialog Semiconductor DA9052/DA9053 regulators"
depends on PMIC_DA9052
help
This driver supports the voltage regulators of DA9052-BC and
DA9053-AA/Bx PMIC.
config REGULATOR_ANATOP
tristate "Freescale i.MX on-chip ANATOP LDO regulators"
depends on MFD_ANATOP
help
Say y here to support Freescale i.MX on-chip ANATOP LDOs
regulators. It is recommended that this option be
enabled on i.MX6 platform.
config REGULATOR_MC13XXX_CORE
tristate
config REGULATOR_MC13783
tristate "Freescale MC13783 regulator driver"
depends on MFD_MC13783
select REGULATOR_MC13XXX_CORE
help
Say y here to support the regulators found on the Freescale MC13783
PMIC.
config REGULATOR_MC13892
tristate "Freescale MC13892 regulator driver"
depends on MFD_MC13XXX
select REGULATOR_MC13XXX_CORE
help
Say y here to support the regulators found on the Freescale MC13892
PMIC.
config REGULATOR_ISL6271A
tristate "Intersil ISL6271A Power regulator"
depends on I2C
help
This driver supports ISL6271A voltage regulator chip.
config REGULATOR_88PM8607
bool "Marvell 88PM8607 Power regulators"
depends on MFD_88PM860X=y
help
This driver supports 88PM8607 voltage regulator chips.
config REGULATOR_MAX1586
tristate "Maxim 1586/1587 voltage regulator"
depends on I2C
help
This driver controls a Maxim 1586 or 1587 voltage output
regulator via I2C bus. The provided regulator is suitable
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
config REGULATOR_MAX8649
tristate "Maxim 8649 voltage regulator"
depends on I2C
select REGMAP_I2C
help
This driver controls a Maxim 8649 voltage output regulator via
I2C bus.
config REGULATOR_MAX8660
tristate "Maxim 8660/8661 voltage regulator"
depends on I2C
help
This driver controls a Maxim 8660/8661 voltage output
regulator via I2C bus.
config REGULATOR_MAX8925
tristate "Maxim MAX8925 Power Management IC"
depends on MFD_MAX8925
help
Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
config REGULATOR_MAX8952
tristate "Maxim MAX8952 Power Management IC"
depends on I2C
help
This driver controls a Maxim 8952 voltage output regulator
via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
modes ranging from 0.77V to 1.40V by 0.01V steps.
config REGULATOR_MAX8997
tristate "Maxim 8997/8966 regulator"
depends on MFD_MAX8997
help
This driver controls a Maxim 8997/8966 regulator
via I2C bus. The provided regulator is suitable for S5PC110,
S5PV210, and Exynos-4 chips to control VCC_CORE and
VCC_USIM voltages.
config REGULATOR_MAX8998
tristate "Maxim 8998 voltage regulator"
depends on MFD_MAX8998
help
This driver controls a Maxim 8998 voltage output regulator
via I2C bus. The provided regulator is suitable for S3C6410
and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
config REGULATOR_PCAP
tristate "Motorola PCAP2 regulator driver"
depends on EZX_PCAP
help
This driver provides support for the voltage regulators of the
PCAP2 PMIC.
config REGULATOR_LP3971
tristate "National Semiconductors LP3971 PMIC regulator driver"
depends on I2C
help
Say Y here to support the voltage regulators and convertors
on National Semiconductors LP3971 PMIC
config REGULATOR_LP3972
tristate "National Semiconductors LP3972 PMIC regulator driver"
depends on I2C
help
Say Y here to support the voltage regulators and convertors
on National Semiconductors LP3972 PMIC
config REGULATOR_PCF50633
tristate "NXP PCF50633 regulator driver"
depends on MFD_PCF50633
help
Say Y here to support the voltage regulators and convertors
on PCF50633
config REGULATOR_S5M8767
tristate "Samsung S5M8767A voltage regulator"
depends on MFD_S5M_CORE
help
This driver supports a Samsung S5M8767A voltage output regulator
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
supports DVS mode with 8bits of output voltage control.
config REGULATOR_AB3100
tristate "ST-Ericsson AB3100 Regulator functions"
depends on AB3100_CORE
default y if AB3100_CORE
help
These regulators correspond to functionality in the
AB3100 analog baseband dealing with power regulators
for the system.
config REGULATOR_AB8500
bool "ST-Ericsson AB8500 Power Regulators"
depends on AB8500_CORE
help
This driver supports the regulators found on the ST-Ericsson mixed
signal AB8500 PMIC
config REGULATOR_DBX500_PRCMU
bool
config REGULATOR_DB8500_PRCMU
bool "ST-Ericsson DB8500 Voltage Domain Regulators"
depends on MFD_DB8500_PRCMU
select REGULATOR_DBX500_PRCMU
help
This driver supports the voltage domain regulators controlled by the
DB8500 PRCMU
config REGULATOR_TPS6105X
tristate "TI TPS6105X Power regulators"
depends on TPS6105X
default y if TPS6105X
help
This driver supports TPS61050/TPS61052 voltage regulator chips.
It is a single boost converter primarily for white LEDs and
audio amplifiers.
config REGULATOR_TPS62360
tristate "TI TPS62360 Power Regulator"
depends on I2C
select REGMAP_I2C
help
This driver supports TPS62360 voltage regulator chip. This
regulator is meant for processor core supply. This chip is
high-frequency synchronous step down dc-dc converter optimized
for battery-powered portable applications.
config REGULATOR_TPS65023
tristate "TI TPS65023 Power regulators"
depends on I2C
select REGMAP_I2C
help
This driver supports TPS65023 voltage regulator chips. TPS65023 provides
three step-down converters and two general-purpose LDO voltage regulators.
It supports TI's software based Class-2 SmartReflex implementation.
config REGULATOR_TPS6507X
tristate "TI TPS6507X Power regulators"
depends on I2C
help
This driver supports TPS6507X voltage regulator chips. TPS6507X provides
three step-down converters and two general-purpose LDO voltage regulators.
It supports TI's software based Class-2 SmartReflex implementation.
config REGULATOR_TPS65217
tristate "TI TPS65217 Power regulators"
depends on MFD_TPS65217
help
This driver supports TPS65217 voltage regulator chips. TPS65217
provides three step-down converters and four general-purpose LDO
voltage regulators. It supports software based voltage control
for different voltage domains
config REGULATOR_TPS6524X
tristate "TI TPS6524X Power regulators"
depends on SPI
help
This driver supports TPS6524X voltage regulator chips. TPS6524X
provides three step-down converters and two general-purpose LDO
voltage regulators. This device is interfaced using a customized
serial interface currently supported on the sequencer serial
port controller.
config REGULATOR_TPS6586X
tristate "TI TPS6586X Power regulators"
depends on MFD_TPS6586X
help
This driver supports TPS6586X voltage regulator chips.
config REGULATOR_TPS65910
tristate "TI TPS65910/TPS65911 Power Regulators"
depends on MFD_TPS65910
help
This driver supports TPS65910/TPS65911 voltage regulator chips.
config REGULATOR_TPS65912
tristate "TI TPS65912 Power regulator"
depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
help
This driver supports TPS65912 voltage regulator chip.
config REGULATOR_TWL4030
bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
depends on TWL4030_CORE
help
This driver supports the voltage regulators provided by
this family of companion chips.
config REGULATOR_WM831X
tristate "Wolfson Microelectronics WM831x PMIC regulators"
depends on MFD_WM831X
help
Support the voltage and current regulators of the WM831x series
of PMIC devices.
config REGULATOR_WM8350
tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
depends on MFD_WM8350
help
This driver provides support for the voltage and current regulators
of the WM8350 AudioPlus PMIC.
config REGULATOR_WM8400
tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
depends on MFD_WM8400
help
This driver provides support for the voltage regulators of the
WM8400 AudioPlus PMIC.
config REGULATOR_WM8994
tristate "Wolfson Microelectronics WM8994 CODEC"
depends on MFD_WM8994
help
This driver provides support for the voltage regulators on the
WM8994 CODEC.
endif