blob: 9e83940ac26577f3f60c92784b6bb482f98f736e [file] [log] [blame]
/*
* arch/xtensa/platforms/xt2000/setup.c
*
* Platform specific functions for the XT2000 board.
*
* Authors: Chris Zankel <chris@zankel.net>
* Joe Taylor <joe@tensilica.com>
*
* Copyright 2001 - 2004 Tensilica Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/stringify.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <asm/processor.h>
#include <asm/platform.h>
#include <asm/bootparam.h>
#include <platform/hardware.h>
#include <platform/serial.h>
/* Assumes s points to an 8-chr string. No checking for NULL. */
static void led_print (int f, char *s)
{
unsigned long* led_addr = (unsigned long*) (XT2000_LED_ADDR + 0xE0) + f;
int i;
for (i = f; i < 8; i++)
if ((*led_addr++ = *s++) == 0)
break;
}
void platform_halt(void)
{
led_print (0, " HALT ");
local_irq_disable();
while (1);
}
void platform_power_off(void)
{
led_print (0, "POWEROFF");
local_irq_disable();
while (1);
}
void platform_restart(void)
{
/* Flush and reset the mmu, simulate a processor reset, and
* jump to the reset vector. */
__asm__ __volatile__ ("movi a2, 15\n\t"
"wsr a2, " __stringify(ICOUNTLEVEL) "\n\t"
"movi a2, 0\n\t"
"wsr a2, " __stringify(ICOUNT) "\n\t"
"wsr a2, " __stringify(IBREAKENABLE) "\n\t"
"wsr a2, " __stringify(LCOUNT) "\n\t"
"movi a2, 0x1f\n\t"
"wsr a2, " __stringify(PS) "\n\t"
"isync\n\t"
"jx %0\n\t"
:
: "a" (XCHAL_RESET_VECTOR_VADDR)
: "a2"
);
/* control never gets here */
}
void __init platform_setup(char** cmdline)
{
led_print (0, "LINUX ");
}
/* early initialization */
extern sysmem_info_t __initdata sysmem;
void platform_init(bp_tag_t* first)
{
/* Set default memory block if not provided by the bootloader. */
if (sysmem.nr_banks == 0) {
sysmem.nr_banks = 1;
sysmem.bank[0].start = PLATFORM_DEFAULT_MEM_START;
sysmem.bank[0].end = PLATFORM_DEFAULT_MEM_START
+ PLATFORM_DEFAULT_MEM_SIZE;
}
}
/* Heartbeat. Let the LED blink. */
void platform_heartbeat(void)
{
static int i=0, t = 0;
if (--t < 0)
{
t = 59;
led_print(7, i ? ".": " ");
i ^= 1;
}
}
//#define RS_TABLE_SIZE 2
//#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
#define _SERIAL_PORT(_base,_irq) \
{ \
.mapbase = (_base), \
.membase = (void*)(_base), \
.irq = (_irq), \
.uartclk = DUART16552_XTAL_FREQ, \
.iotype = UPIO_MEM, \
.flags = UPF_BOOT_AUTOCONF, \
.regshift = 2, \
}
static struct plat_serial8250_port xt2000_serial_data[] = {
#if XCHAL_HAVE_BE
_SERIAL_PORT(DUART16552_1_ADDR + 3, DUART16552_1_INTNUM),
_SERIAL_PORT(DUART16552_2_ADDR + 3, DUART16552_2_INTNUM),
#else
_SERIAL_PORT(DUART16552_1_ADDR, DUART16552_1_INTNUM),
_SERIAL_PORT(DUART16552_2_ADDR, DUART16552_2_INTNUM),
#endif
{ }
};
static struct platform_device xt2000_serial8250_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = xt2000_serial_data,
},
};
static struct resource xt2000_sonic_res[] = {
{
.start = SONIC83934_ADDR,
.end = SONIC83934_ADDR + 0xff,
.flags = IORESOURCE_MEM,
},
{
.start = SONIC83934_INTNUM,
.end = SONIC83934_INTNUM,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device xt2000_sonic_device = {
.name = "xtsonic",
.num_resources = ARRAY_SIZE(xt2000_sonic_res),
.resource = xt2000_sonic_res,
};
static int __init xt2000_setup_devinit(void)
{
platform_device_register(&xt2000_serial8250_device);
platform_device_register(&xt2000_sonic_device);
return 0;
}
device_initcall(xt2000_setup_devinit);