|  | /* | 
|  | * Dallas Semiconductor DS1682 Elapsed Time Recorder device driver | 
|  | * | 
|  | * Written by: Grant Likely <grant.likely@secretlab.ca> | 
|  | * | 
|  | * Copyright (C) 2007 Secret Lab Technologies Ltd. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * The DS1682 elapsed timer recorder is a simple device that implements | 
|  | * one elapsed time counter, one event counter, an alarm signal and 10 | 
|  | * bytes of general purpose EEPROM. | 
|  | * | 
|  | * This driver provides access to the DS1682 counters and user data via | 
|  | * the sysfs.  The following attributes are added to the device node: | 
|  | *     elapsed_time (u32): Total elapsed event time in ms resolution | 
|  | *     alarm_time (u32): When elapsed time exceeds the value in alarm_time, | 
|  | *                       then the alarm pin is asserted. | 
|  | *     event_count (u16): number of times the event pin has gone low. | 
|  | *     eeprom (u8[10]): general purpose EEPROM | 
|  | * | 
|  | * Counter registers and user data are both read/write unless the device | 
|  | * has been write protected.  This driver does not support turning off write | 
|  | * protection.  Once write protection is turned on, it is impossible to | 
|  | * turn it off again, so I have left the feature out of this driver to avoid | 
|  | * accidental enabling, but it is trivial to add write protect support. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/sysfs.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/hwmon-sysfs.h> | 
|  |  | 
|  | /* Device registers */ | 
|  | #define DS1682_REG_CONFIG		0x00 | 
|  | #define DS1682_REG_ALARM		0x01 | 
|  | #define DS1682_REG_ELAPSED		0x05 | 
|  | #define DS1682_REG_EVT_CNTR		0x09 | 
|  | #define DS1682_REG_EEPROM		0x0b | 
|  | #define DS1682_REG_RESET		0x1d | 
|  | #define DS1682_REG_WRITE_DISABLE	0x1e | 
|  | #define DS1682_REG_WRITE_MEM_DISABLE	0x1f | 
|  |  | 
|  | #define DS1682_EEPROM_SIZE		10 | 
|  |  | 
|  | /* | 
|  | * Generic counter attributes | 
|  | */ | 
|  | static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | __le32 val = 0; | 
|  | int rc; | 
|  |  | 
|  | dev_dbg(dev, "ds1682_show() called on %s\n", attr->attr.name); | 
|  |  | 
|  | /* Read the register */ | 
|  | rc = i2c_smbus_read_i2c_block_data(client, sattr->index, sattr->nr, | 
|  | (u8 *) & val); | 
|  | if (rc < 0) | 
|  | return -EIO; | 
|  |  | 
|  | /* Special case: the 32 bit regs are time values with 1/4s | 
|  | * resolution, scale them up to milliseconds */ | 
|  | if (sattr->nr == 4) | 
|  | return sprintf(buf, "%llu\n", | 
|  | ((unsigned long long)le32_to_cpu(val)) * 250); | 
|  |  | 
|  | /* Format the output string and return # of bytes */ | 
|  | return sprintf(buf, "%li\n", (long)le32_to_cpu(val)); | 
|  | } | 
|  |  | 
|  | static ssize_t ds1682_store(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | u64 val; | 
|  | __le32 val_le; | 
|  | int rc; | 
|  |  | 
|  | dev_dbg(dev, "ds1682_store() called on %s\n", attr->attr.name); | 
|  |  | 
|  | /* Decode input */ | 
|  | rc = kstrtoull(buf, 0, &val); | 
|  | if (rc < 0) { | 
|  | dev_dbg(dev, "input string not a number\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Special case: the 32 bit regs are time values with 1/4s | 
|  | * resolution, scale input down to quarter-seconds */ | 
|  | if (sattr->nr == 4) | 
|  | do_div(val, 250); | 
|  |  | 
|  | /* write out the value */ | 
|  | val_le = cpu_to_le32(val); | 
|  | rc = i2c_smbus_write_i2c_block_data(client, sattr->index, sattr->nr, | 
|  | (u8 *) & val_le); | 
|  | if (rc < 0) { | 
|  | dev_err(dev, "register write failed; reg=0x%x, size=%i\n", | 
|  | sattr->index, sattr->nr); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Simple register attributes | 
|  | */ | 
|  | static SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show, | 
|  | ds1682_store, 4, DS1682_REG_ELAPSED); | 
|  | static SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show, | 
|  | ds1682_store, 4, DS1682_REG_ALARM); | 
|  | static SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show, | 
|  | ds1682_store, 2, DS1682_REG_EVT_CNTR); | 
|  |  | 
|  | static const struct attribute_group ds1682_group = { | 
|  | .attrs = (struct attribute *[]) { | 
|  | &sensor_dev_attr_elapsed_time.dev_attr.attr, | 
|  | &sensor_dev_attr_alarm_time.dev_attr.attr, | 
|  | &sensor_dev_attr_event_count.dev_attr.attr, | 
|  | NULL, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * User data attribute | 
|  | */ | 
|  | static ssize_t ds1682_eeprom_read(struct file *filp, struct kobject *kobj, | 
|  | struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct i2c_client *client = kobj_to_i2c_client(kobj); | 
|  | int rc; | 
|  |  | 
|  | dev_dbg(&client->dev, "ds1682_eeprom_read(p=%p, off=%lli, c=%zi)\n", | 
|  | buf, off, count); | 
|  |  | 
|  | if (off >= DS1682_EEPROM_SIZE) | 
|  | return 0; | 
|  |  | 
|  | if (off + count > DS1682_EEPROM_SIZE) | 
|  | count = DS1682_EEPROM_SIZE - off; | 
|  |  | 
|  | rc = i2c_smbus_read_i2c_block_data(client, DS1682_REG_EEPROM + off, | 
|  | count, buf); | 
|  | if (rc < 0) | 
|  | return -EIO; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t ds1682_eeprom_write(struct file *filp, struct kobject *kobj, | 
|  | struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct i2c_client *client = kobj_to_i2c_client(kobj); | 
|  |  | 
|  | dev_dbg(&client->dev, "ds1682_eeprom_write(p=%p, off=%lli, c=%zi)\n", | 
|  | buf, off, count); | 
|  |  | 
|  | if (off >= DS1682_EEPROM_SIZE) | 
|  | return -ENOSPC; | 
|  |  | 
|  | if (off + count > DS1682_EEPROM_SIZE) | 
|  | count = DS1682_EEPROM_SIZE - off; | 
|  |  | 
|  | /* Write out to the device */ | 
|  | if (i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + off, | 
|  | count, buf) < 0) | 
|  | return -EIO; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static struct bin_attribute ds1682_eeprom_attr = { | 
|  | .attr = { | 
|  | .name = "eeprom", | 
|  | .mode = S_IRUGO | S_IWUSR, | 
|  | }, | 
|  | .size = DS1682_EEPROM_SIZE, | 
|  | .read = ds1682_eeprom_read, | 
|  | .write = ds1682_eeprom_write, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Called when a ds1682 device is matched with this driver | 
|  | */ | 
|  | static int ds1682_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | if (!i2c_check_functionality(client->adapter, | 
|  | I2C_FUNC_SMBUS_I2C_BLOCK)) { | 
|  | dev_err(&client->dev, "i2c bus does not support the ds1682\n"); | 
|  | rc = -ENODEV; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | rc = sysfs_create_group(&client->dev.kobj, &ds1682_group); | 
|  | if (rc) | 
|  | goto exit; | 
|  |  | 
|  | rc = sysfs_create_bin_file(&client->dev.kobj, &ds1682_eeprom_attr); | 
|  | if (rc) | 
|  | goto exit_bin_attr; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit_bin_attr: | 
|  | sysfs_remove_group(&client->dev.kobj, &ds1682_group); | 
|  | exit: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int ds1682_remove(struct i2c_client *client) | 
|  | { | 
|  | sysfs_remove_bin_file(&client->dev.kobj, &ds1682_eeprom_attr); | 
|  | sysfs_remove_group(&client->dev.kobj, &ds1682_group); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id ds1682_id[] = { | 
|  | { "ds1682", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, ds1682_id); | 
|  |  | 
|  | static struct i2c_driver ds1682_driver = { | 
|  | .driver = { | 
|  | .name = "ds1682", | 
|  | }, | 
|  | .probe = ds1682_probe, | 
|  | .remove = ds1682_remove, | 
|  | .id_table = ds1682_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(ds1682_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); | 
|  | MODULE_DESCRIPTION("DS1682 Elapsed Time Indicator driver"); | 
|  | MODULE_LICENSE("GPL"); |