net: Remove depends on HAS_DMA in case of platform dependency
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.
Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.
This simplifies the dependencies, and allows to improve compile-testing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
---
v4:
- Rebase to v4.18-rc1 (applies to next-20180622, too),
v3:
- Rebase to v4.17-rc1,
- Drop obsolete note about FSL_FMAN,
v2:
- Add Reviewed-by, Acked-by,
- Drop RFC state,
- Split per subsystem.
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index d5c15e8..f273af1 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -173,7 +173,7 @@
config AMD_XGBE
tristate "AMD 10GbE Ethernet driver"
- depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM && HAS_DMA
+ depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM
depends on X86 || ARM64 || COMPILE_TEST
select BITREVERSE
select CRC32
diff --git a/drivers/net/ethernet/apm/xgene-v2/Kconfig b/drivers/net/ethernet/apm/xgene-v2/Kconfig
index 1205861..eedd3f3 100644
--- a/drivers/net/ethernet/apm/xgene-v2/Kconfig
+++ b/drivers/net/ethernet/apm/xgene-v2/Kconfig
@@ -1,6 +1,5 @@
config NET_XGENE_V2
tristate "APM X-Gene SoC Ethernet-v2 Driver"
- depends on HAS_DMA
depends on ARCH_XGENE || COMPILE_TEST
help
This is the Ethernet driver for the on-chip ethernet interface
diff --git a/drivers/net/ethernet/apm/xgene/Kconfig b/drivers/net/ethernet/apm/xgene/Kconfig
index afccb033..e4e33c9 100644
--- a/drivers/net/ethernet/apm/xgene/Kconfig
+++ b/drivers/net/ethernet/apm/xgene/Kconfig
@@ -1,6 +1,5 @@
config NET_XGENE
tristate "APM X-Gene SoC Ethernet Driver"
- depends on HAS_DMA
depends on ARCH_XGENE || COMPILE_TEST
select PHYLIB
select MDIO_XGENE
diff --git a/drivers/net/ethernet/arc/Kconfig b/drivers/net/ethernet/arc/Kconfig
index e743ddf..5d0ab8e 100644
--- a/drivers/net/ethernet/arc/Kconfig
+++ b/drivers/net/ethernet/arc/Kconfig
@@ -24,7 +24,8 @@
config ARC_EMAC
tristate "ARC EMAC support"
select ARC_EMAC_CORE
- depends on OF_IRQ && OF_NET && HAS_DMA && (ARC || COMPILE_TEST)
+ depends on OF_IRQ && OF_NET
+ depends on ARC || COMPILE_TEST
---help---
On some legacy ARC (Synopsys) FPGA boards such as ARCAngel4/ML50x
non-standard on-chip ethernet device ARC EMAC 10/100 is used.
@@ -33,7 +34,8 @@
config EMAC_ROCKCHIP
tristate "Rockchip EMAC support"
select ARC_EMAC_CORE
- depends on OF_IRQ && OF_NET && REGULATOR && HAS_DMA && (ARCH_ROCKCHIP || COMPILE_TEST)
+ depends on OF_IRQ && OF_NET && REGULATOR
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
---help---
Support for Rockchip RK3036/RK3066/RK3188 EMAC ethernet controllers.
This selects Rockchip SoC glue layer support for the
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index af75156..4c3bfde6 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -157,7 +157,6 @@
config BGMAC_BCMA
tristate "Broadcom iProc GBit BCMA support"
depends on BCMA && BCMA_HOST_SOC
- depends on HAS_DMA
depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
select BGMAC
select PHYLIB
@@ -170,7 +169,6 @@
config BGMAC_PLATFORM
tristate "Broadcom iProc GBit platform support"
- depends on HAS_DMA
depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on OF
select BGMAC
diff --git a/drivers/net/ethernet/calxeda/Kconfig b/drivers/net/ethernet/calxeda/Kconfig
index 07d2201..9fdd496 100644
--- a/drivers/net/ethernet/calxeda/Kconfig
+++ b/drivers/net/ethernet/calxeda/Kconfig
@@ -1,6 +1,6 @@
config NET_CALXEDA_XGMAC
tristate "Calxeda 1G/10G XGMAC Ethernet driver"
- depends on HAS_IOMEM && HAS_DMA
+ depends on HAS_IOMEM
depends on ARCH_HIGHBANK || COMPILE_TEST
select CRC32
help
diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
index 8bcf470..fb1a725 100644
--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig
@@ -5,7 +5,7 @@
config NET_VENDOR_HISILICON
bool "Hisilicon devices"
default y
- depends on (OF || ACPI) && HAS_DMA
+ depends on OF || ACPI
depends on ARM || ARM64 || COMPILE_TEST
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index cc2f770..f33fd22b 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -18,8 +18,8 @@
config MV643XX_ETH
tristate "Marvell Discovery (643XX) and Orion ethernet support"
- depends on (MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST) && INET
- depends on HAS_DMA
+ depends on MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST
+ depends on INET
select PHYLIB
select MVMDIO
---help---
@@ -58,7 +58,6 @@
config MVNETA
tristate "Marvell Armada 370/38x/XP/37xx network interface support"
depends on ARCH_MVEBU || COMPILE_TEST
- depends on HAS_DMA
select MVMDIO
select PHYLINK
---help---
@@ -84,7 +83,6 @@
config MVPP2
tristate "Marvell Armada 375/7K/8K network interface support"
depends on ARCH_MVEBU || COMPILE_TEST
- depends on HAS_DMA
select MVMDIO
select PHYLINK
---help---
@@ -93,7 +91,7 @@
config PXA168_ETH
tristate "Marvell pxa168 ethernet support"
- depends on HAS_IOMEM && HAS_DMA
+ depends on HAS_IOMEM
depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST
select PHYLIB
---help---
diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
index f4d9c99..82827a8 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
@@ -30,7 +30,7 @@
config MLXSW_PCI
tristate "PCI bus implementation for Mellanox Technologies Switch ASICs"
- depends on PCI && HAS_DMA && HAS_IOMEM && MLXSW_CORE
+ depends on PCI && HAS_IOMEM && MLXSW_CORE
default m
---help---
This is PCI bus implementation for Mellanox Technologies Switch ASICs.
diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig
index 27be51f..f3f7477 100644
--- a/drivers/net/ethernet/renesas/Kconfig
+++ b/drivers/net/ethernet/renesas/Kconfig
@@ -17,7 +17,6 @@
config SH_ETH
tristate "Renesas SuperH Ethernet support"
- depends on HAS_DMA
depends on ARCH_RENESAS || SUPERH || COMPILE_TEST
select CRC32
select MII
@@ -31,7 +30,6 @@
config RAVB
tristate "Renesas Ethernet AVB support"
- depends on HAS_DMA
depends on ARCH_RENESAS || COMPILE_TEST
select CRC32
select MII
diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig b/drivers/net/wireless/broadcom/brcm80211/Kconfig
index 9d99eb4..6acba67 100644
--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
+++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
@@ -60,7 +60,6 @@
bool "PCIE bus interface support for FullMAC driver"
depends on BRCMFMAC
depends on PCI
- depends on HAS_DMA
select BRCMFMAC_PROTO_MSGBUF
select FW_LOADER
---help---
diff --git a/drivers/net/wireless/quantenna/qtnfmac/Kconfig b/drivers/net/wireless/quantenna/qtnfmac/Kconfig
index 025fa60..8d1492a 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/Kconfig
+++ b/drivers/net/wireless/quantenna/qtnfmac/Kconfig
@@ -7,7 +7,7 @@
config QTNFMAC_PEARL_PCIE
tristate "Quantenna QSR10g PCIe support"
default n
- depends on HAS_DMA && PCI && CFG80211
+ depends on PCI && CFG80211
select QTNFMAC
select FW_LOADER
select CRC32
