blob: 984c0feb2a4ebb87d1f399d7888c7261ed4c0bfe [file] [log] [blame]
/*
Driver for SAA6588 RDS decoder
(c) 2005 Hans J. Koch
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/types.h>
#include <linux/videodev2.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/wait.h>
#include <asm/uaccess.h>
#include <media/rds.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
/* insmod options */
static unsigned int debug;
static unsigned int xtal;
static unsigned int mmbs;
static unsigned int plvl;
static unsigned int bufblocks = 100;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages");
module_param(xtal, int, 0);
MODULE_PARM_DESC(xtal, "select oscillator frequency (0..3), default 0");
module_param(mmbs, int, 0);
MODULE_PARM_DESC(mmbs, "enable MMBS mode: 0=off (default), 1=on");
module_param(plvl, int, 0);
MODULE_PARM_DESC(plvl, "select pause level (0..3), default 0");
module_param(bufblocks, int, 0);
MODULE_PARM_DESC(bufblocks, "number of buffered blocks, default 100");
MODULE_DESCRIPTION("v4l2 driver module for SAA6588 RDS decoder");
MODULE_AUTHOR("Hans J. Koch <koch@hjk-az.de>");
MODULE_LICENSE("GPL");
/* ---------------------------------------------------------------------- */
#define UNSET (-1U)
#define PREFIX "saa6588: "
#define dprintk if (debug) printk
struct saa6588 {
struct v4l2_subdev sd;
struct delayed_work work;
spinlock_t lock;
unsigned char *buffer;
unsigned int buf_size;
unsigned int rd_index;
unsigned int wr_index;
unsigned int block_count;
unsigned char last_blocknum;
wait_queue_head_t read_queue;
int data_available_for_read;
u8 sync;
};
static inline struct saa6588 *to_saa6588(struct v4l2_subdev *sd)
{
return container_of(sd, struct saa6588, sd);
}
/* ---------------------------------------------------------------------- */
/*
* SAA6588 defines
*/
/* Initialization and mode control byte (0w) */
/* bit 0+1 (DAC0/DAC1) */
#define cModeStandard 0x00
#define cModeFastPI 0x01
#define cModeReducedRequest 0x02
#define cModeInvalid 0x03
/* bit 2 (RBDS) */
#define cProcessingModeRDS 0x00
#define cProcessingModeRBDS 0x04
/* bit 3+4 (SYM0/SYM1) */
#define cErrCorrectionNone 0x00
#define cErrCorrection2Bits 0x08
#define cErrCorrection5Bits 0x10
#define cErrCorrectionNoneRBDS 0x18
/* bit 5 (NWSY) */
#define cSyncNormal 0x00
#define cSyncRestart 0x20
/* bit 6 (TSQD) */
#define cSigQualityDetectOFF 0x00
#define cSigQualityDetectON 0x40
/* bit 7 (SQCM) */
#define cSigQualityTriggered 0x00
#define cSigQualityContinous 0x80
/* Pause level and flywheel control byte (1w) */
/* bits 0..5 (FEB0..FEB5) */
#define cFlywheelMaxBlocksMask 0x3F
#define cFlywheelDefault 0x20
/* bits 6+7 (PL0/PL1) */
#define cPauseLevel_11mV 0x00
#define cPauseLevel_17mV 0x40
#define cPauseLevel_27mV 0x80
#define cPauseLevel_43mV 0xC0
/* Pause time/oscillator frequency/quality detector control byte (1w) */
/* bits 0..4 (SQS0..SQS4) */
#define cQualityDetectSensMask 0x1F
#define cQualityDetectDefault 0x0F
/* bit 5 (SOSC) */
#define cSelectOscFreqOFF 0x00
#define cSelectOscFreqON 0x20
/* bit 6+7 (PTF0/PTF1) */
#define cOscFreq_4332kHz 0x00
#define cOscFreq_8664kHz 0x40
#define cOscFreq_12996kHz 0x80
#define cOscFreq_17328kHz 0xC0
/* ---------------------------------------------------------------------- */
static int block_to_user_buf(struct saa6588 *s, unsigned char __user *user_buf)
{
int i;
if (s->rd_index == s->wr_index) {
if (debug > 2)
dprintk(PREFIX "Read: buffer empty.\n");
return 0;
}
if (debug > 2) {
dprintk(PREFIX "Read: ");
for (i = s->rd_index; i < s->rd_index + 3; i++)
dprintk("0x%02x ", s->buffer[i]);
}
if (copy_to_user(user_buf, &s->buffer[s->rd_index], 3))
return -EFAULT;
s->rd_index += 3;
if (s->rd_index >= s->buf_size)
s->rd_index = 0;
s->block_count--;
if (debug > 2)
dprintk("%d blocks total.\n", s->block_count);
return 1;
}
static void read_from_buf(struct saa6588 *s, struct rds_command *a)
{
unsigned long flags;
unsigned char __user *buf_ptr = a->buffer;
unsigned int i;
unsigned int rd_blocks;
a->result = 0;
if (!a->buffer)
return;
while (!s->data_available_for_read) {
int ret = wait_event_interruptible(s->read_queue,
s->data_available_for_read);
if (ret == -ERESTARTSYS) {
a->result = -EINTR;
return;
}
}
spin_lock_irqsave(&s->lock, flags);
rd_blocks = a->block_count;
if (rd_blocks > s->block_count)
rd_blocks = s->block_count;
if (!rd_blocks) {
spin_unlock_irqrestore(&s->lock, flags);
return;
}
for (i = 0; i < rd_blocks; i++) {
if (block_to_user_buf(s, buf_ptr)) {
buf_ptr += 3;
a->result++;
} else
break;
}
a->result *= 3;
s->data_available_for_read = (s->block_count > 0);
spin_unlock_irqrestore(&s->lock, flags);
}
static void block_to_buf(struct saa6588 *s, unsigned char *blockbuf)
{
unsigned int i;
if (debug > 3)
dprintk(PREFIX "New block: ");
for (i = 0; i < 3; ++i) {
if (debug > 3)
dprintk("0x%02x ", blockbuf[i]);
s->buffer[s->wr_index] = blockbuf[i];
s->wr_index++;
}
if (s->wr_index >= s->buf_size)
s->wr_index = 0;
if (s->wr_index == s->rd_index) {
s->rd_index += 3;
if (s->rd_index >= s->buf_size)
s->rd_index = 0;
} else
s->block_count++;
if (debug > 3)
dprintk("%d blocks total.\n", s->block_count);
}
static void saa6588_i2c_poll(struct saa6588 *s)
{
struct i2c_client *client = v4l2_get_subdevdata(&s->sd);
unsigned long flags;
unsigned char tmpbuf[6];
unsigned char blocknum;
unsigned char tmp;
/* Although we only need 3 bytes, we have to read at least 6.
SAA6588 returns garbage otherwise. */
if (6 != i2c_master_recv(client, &tmpbuf[0], 6)) {
if (debug > 1)
dprintk(PREFIX "read error!\n");
return;
}
s->sync = tmpbuf[0] & 0x10;
if (!s->sync)
return;
blocknum = tmpbuf[0] >> 5;
if (blocknum == s->last_blocknum) {
if (debug > 3)
dprintk("Saw block %d again.\n", blocknum);
return;
}
s->last_blocknum = blocknum;
/*
Byte order according to v4l2 specification:
Byte 0: Least Significant Byte of RDS Block
Byte 1: Most Significant Byte of RDS Block
Byte 2 Bit 7: Error bit. Indicates that an uncorrectable error
occurred during reception of this block.
Bit 6: Corrected bit. Indicates that an error was
corrected for this data block.
Bits 5-3: Same as bits 0-2.
Bits 2-0: Block number.
SAA6588 byte order is Status-MSB-LSB, so we have to swap the
first and the last of the 3 bytes block.
*/
tmp = tmpbuf[2];
tmpbuf[2] = tmpbuf[0];
tmpbuf[0] = tmp;
/* Map 'Invalid block E' to 'Invalid Block' */
if (blocknum == 6)
blocknum = V4L2_RDS_BLOCK_INVALID;
/* And if are not in mmbs mode, then 'Block E' is also mapped
to 'Invalid Block'. As far as I can tell MMBS is discontinued,
and if there is ever a need to support E blocks, then please
contact the linux-media mailinglist. */
else if (!mmbs && blocknum == 5)
blocknum = V4L2_RDS_BLOCK_INVALID;
tmp = blocknum;
tmp |= blocknum << 3; /* Received offset == Offset Name (OK ?) */
if ((tmpbuf[2] & 0x03) == 0x03)
tmp |= V4L2_RDS_BLOCK_ERROR; /* uncorrectable error */
else if ((tmpbuf[2] & 0x03) != 0x00)
tmp |= V4L2_RDS_BLOCK_CORRECTED; /* corrected error */
tmpbuf[2] = tmp; /* Is this enough ? Should we also check other bits ? */
spin_lock_irqsave(&s->lock, flags);
block_to_buf(s, tmpbuf);
spin_unlock_irqrestore(&s->lock, flags);
s->data_available_for_read = 1;
wake_up_interruptible(&s->read_queue);
}
static void saa6588_work(struct work_struct *work)
{
struct saa6588 *s = container_of(work, struct saa6588, work.work);
saa6588_i2c_poll(s);
schedule_delayed_work(&s->work, msecs_to_jiffies(20));
}
static void saa6588_configure(struct saa6588 *s)
{
struct i2c_client *client = v4l2_get_subdevdata(&s->sd);
unsigned char buf[3];
int rc;
buf[0] = cSyncRestart;
if (mmbs)
buf[0] |= cProcessingModeRBDS;
buf[1] = cFlywheelDefault;
switch (plvl) {
case 0:
buf[1] |= cPauseLevel_11mV;
break;
case 1:
buf[1] |= cPauseLevel_17mV;
break;
case 2:
buf[1] |= cPauseLevel_27mV;
break;
case 3:
buf[1] |= cPauseLevel_43mV;
break;
default: /* nothing */
break;
}
buf[2] = cQualityDetectDefault | cSelectOscFreqON;
switch (xtal) {
case 0:
buf[2] |= cOscFreq_4332kHz;
break;
case 1:
buf[2] |= cOscFreq_8664kHz;
break;
case 2:
buf[2] |= cOscFreq_12996kHz;
break;
case 3:
buf[2] |= cOscFreq_17328kHz;
break;
default: /* nothing */
break;
}
dprintk(PREFIX "writing: 0w=0x%02x 1w=0x%02x 2w=0x%02x\n",
buf[0], buf[1], buf[2]);
rc = i2c_master_send(client, buf, 3);
if (rc != 3)
printk(PREFIX "i2c i/o error: rc == %d (should be 3)\n", rc);
}
/* ---------------------------------------------------------------------- */
static long saa6588_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
{
struct saa6588 *s = to_saa6588(sd);
struct rds_command *a = arg;
switch (cmd) {
/* --- open() for /dev/radio --- */
case RDS_CMD_OPEN:
a->result = 0; /* return error if chip doesn't work ??? */
break;
/* --- close() for /dev/radio --- */
case RDS_CMD_CLOSE:
s->data_available_for_read = 1;
wake_up_interruptible(&s->read_queue);
a->result = 0;
break;
/* --- read() for /dev/radio --- */
case RDS_CMD_READ:
read_from_buf(s, a);
break;
/* --- poll() for /dev/radio --- */
case RDS_CMD_POLL:
a->result = 0;
if (s->data_available_for_read) {
a->result |= POLLIN | POLLRDNORM;
}
poll_wait(a->instance, &s->read_queue, a->event_list);
break;
default:
/* nothing */
return -ENOIOCTLCMD;
}
return 0;
}
static int saa6588_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
{
struct saa6588 *s = to_saa6588(sd);
vt->capability |= V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO;
if (s->sync)
vt->rxsubchans |= V4L2_TUNER_SUB_RDS;
return 0;
}
static int saa6588_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
{
struct saa6588 *s = to_saa6588(sd);
saa6588_configure(s);
return 0;
}
static int saa6588_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA6588, 0);
}
/* ----------------------------------------------------------------------- */
static const struct v4l2_subdev_core_ops saa6588_core_ops = {
.g_chip_ident = saa6588_g_chip_ident,
.ioctl = saa6588_ioctl,
};
static const struct v4l2_subdev_tuner_ops saa6588_tuner_ops = {
.g_tuner = saa6588_g_tuner,
.s_tuner = saa6588_s_tuner,
};
static const struct v4l2_subdev_ops saa6588_ops = {
.core = &saa6588_core_ops,
.tuner = &saa6588_tuner_ops,
};
/* ---------------------------------------------------------------------- */
static int saa6588_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct saa6588 *s;
struct v4l2_subdev *sd;
v4l_info(client, "saa6588 found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
s = kzalloc(sizeof(*s), GFP_KERNEL);
if (s == NULL)
return -ENOMEM;
s->buf_size = bufblocks * 3;
s->buffer = kmalloc(s->buf_size, GFP_KERNEL);
if (s->buffer == NULL) {
kfree(s);
return -ENOMEM;
}
sd = &s->sd;
v4l2_i2c_subdev_init(sd, client, &saa6588_ops);
spin_lock_init(&s->lock);
s->block_count = 0;
s->wr_index = 0;
s->rd_index = 0;
s->last_blocknum = 0xff;
init_waitqueue_head(&s->read_queue);
s->data_available_for_read = 0;
saa6588_configure(s);
/* start polling via eventd */
INIT_DELAYED_WORK(&s->work, saa6588_work);
schedule_delayed_work(&s->work, 0);
return 0;
}
static int saa6588_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct saa6588 *s = to_saa6588(sd);
v4l2_device_unregister_subdev(sd);
cancel_delayed_work_sync(&s->work);
kfree(s->buffer);
kfree(s);
return 0;
}
/* ----------------------------------------------------------------------- */
static const struct i2c_device_id saa6588_id[] = {
{ "saa6588", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, saa6588_id);
static struct i2c_driver saa6588_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "saa6588",
},
.probe = saa6588_probe,
.remove = saa6588_remove,
.id_table = saa6588_id,
};
static __init int init_saa6588(void)
{
return i2c_add_driver(&saa6588_driver);
}
static __exit void exit_saa6588(void)
{
i2c_del_driver(&saa6588_driver);
}
module_init(init_saa6588);
module_exit(exit_saa6588);