|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Common clock framework driver for the Versaclock7 family of timing devices. | 
|  | * | 
|  | * Copyright (c) 2022 Renesas Electronics Corporation | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/bitfield.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/clk-provider.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/math64.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/property.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/swab.h> | 
|  |  | 
|  | /* | 
|  | * 16-bit register address: the lower 8 bits of the register address come | 
|  | * from the offset addr byte and the upper 8 bits come from the page register. | 
|  | */ | 
|  | #define VC7_PAGE_ADDR			0xFD | 
|  | #define VC7_PAGE_WINDOW			256 | 
|  | #define VC7_MAX_REG			0x364 | 
|  |  | 
|  | /* Maximum number of banks supported by VC7 */ | 
|  | #define VC7_NUM_BANKS			7 | 
|  |  | 
|  | /* Maximum number of FODs supported by VC7 */ | 
|  | #define VC7_NUM_FOD			3 | 
|  |  | 
|  | /* Maximum number of IODs supported by VC7 */ | 
|  | #define VC7_NUM_IOD			4 | 
|  |  | 
|  | /* Maximum number of outputs supported by VC7 */ | 
|  | #define VC7_NUM_OUT			12 | 
|  |  | 
|  | /* VCO valid range is 9.5 GHz to 10.7 GHz */ | 
|  | #define VC7_APLL_VCO_MIN		9500000000UL | 
|  | #define VC7_APLL_VCO_MAX		10700000000UL | 
|  |  | 
|  | /* APLL denominator is fixed at 2^27 */ | 
|  | #define VC7_APLL_DENOMINATOR_BITS	27 | 
|  |  | 
|  | /* FOD 1st stage denominator is fixed 2^34 */ | 
|  | #define VC7_FOD_DENOMINATOR_BITS	34 | 
|  |  | 
|  | /* IOD can operate between 1kHz and 650MHz */ | 
|  | #define VC7_IOD_RATE_MIN		1000UL | 
|  | #define VC7_IOD_RATE_MAX		650000000UL | 
|  | #define VC7_IOD_MIN_DIVISOR		14 | 
|  | #define VC7_IOD_MAX_DIVISOR		0x1ffffff /* 25-bit */ | 
|  |  | 
|  | #define VC7_FOD_RATE_MIN		1000UL | 
|  | #define VC7_FOD_RATE_MAX		650000000UL | 
|  | #define VC7_FOD_1ST_STAGE_RATE_MIN	33000000UL /* 33 MHz */ | 
|  | #define VC7_FOD_1ST_STAGE_RATE_MAX	650000000UL /* 650 MHz */ | 
|  | #define VC7_FOD_1ST_INT_MAX		324 | 
|  | #define VC7_FOD_2ND_INT_MIN		2 | 
|  | #define VC7_FOD_2ND_INT_MAX		0x1ffff /* 17-bit */ | 
|  |  | 
|  | /* VC7 Registers */ | 
|  |  | 
|  | #define VC7_REG_XO_CNFG			0x2C | 
|  | #define VC7_REG_XO_CNFG_COUNT		4 | 
|  | #define VC7_REG_XO_IB_H_DIV_SHIFT	24 | 
|  | #define VC7_REG_XO_IB_H_DIV_MASK	GENMASK(28, VC7_REG_XO_IB_H_DIV_SHIFT) | 
|  |  | 
|  | #define VC7_REG_APLL_FB_DIV_FRAC	0x120 | 
|  | #define VC7_REG_APLL_FB_DIV_FRAC_COUNT	4 | 
|  | #define VC7_REG_APLL_FB_DIV_FRAC_MASK	GENMASK(26, 0) | 
|  |  | 
|  | #define VC7_REG_APLL_FB_DIV_INT		0x124 | 
|  | #define VC7_REG_APLL_FB_DIV_INT_COUNT	2 | 
|  | #define VC7_REG_APLL_FB_DIV_INT_MASK	GENMASK(9, 0) | 
|  |  | 
|  | #define VC7_REG_APLL_CNFG		0x127 | 
|  | #define VC7_REG_APLL_EN_DOUBLER		BIT(0) | 
|  |  | 
|  | #define VC7_REG_OUT_BANK_CNFG(idx)	(0x280 + (0x4 * (idx))) | 
|  | #define VC7_REG_OUTPUT_BANK_SRC_MASK	GENMASK(2, 0) | 
|  |  | 
|  | #define VC7_REG_FOD_INT_CNFG(idx)	(0x1E0 + (0x10 * (idx))) | 
|  | #define VC7_REG_FOD_INT_CNFG_COUNT	8 | 
|  | #define VC7_REG_FOD_1ST_INT_MASK	GENMASK(8, 0) | 
|  | #define VC7_REG_FOD_2ND_INT_SHIFT	9 | 
|  | #define VC7_REG_FOD_2ND_INT_MASK	GENMASK(25, VC7_REG_FOD_2ND_INT_SHIFT) | 
|  | #define VC7_REG_FOD_FRAC_SHIFT		26 | 
|  | #define VC7_REG_FOD_FRAC_MASK		GENMASK_ULL(59, VC7_REG_FOD_FRAC_SHIFT) | 
|  |  | 
|  | #define VC7_REG_IOD_INT_CNFG(idx)	(0x1C0 + (0x8 * (idx))) | 
|  | #define VC7_REG_IOD_INT_CNFG_COUNT	4 | 
|  | #define VC7_REG_IOD_INT_MASK		GENMASK(24, 0) | 
|  |  | 
|  | #define VC7_REG_ODRV_EN(idx)		(0x240 + (0x4 * (idx))) | 
|  | #define VC7_REG_OUT_DIS			BIT(0) | 
|  |  | 
|  | struct vc7_driver_data; | 
|  | static const struct regmap_config vc7_regmap_config; | 
|  |  | 
|  | /* Supported Renesas VC7 models */ | 
|  | enum vc7_model { | 
|  | VC7_RC21008A, | 
|  | }; | 
|  |  | 
|  | struct vc7_chip_info { | 
|  | const enum vc7_model model; | 
|  | const unsigned int banks[VC7_NUM_BANKS]; | 
|  | const unsigned int num_banks; | 
|  | const unsigned int outputs[VC7_NUM_OUT]; | 
|  | const unsigned int num_outputs; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Changing the APLL frequency is currently not supported. | 
|  | * The APLL will consist of an opaque block between the XO and FOD/IODs and | 
|  | * its frequency will be computed based on the current state of the device. | 
|  | */ | 
|  | struct vc7_apll_data { | 
|  | struct clk *clk; | 
|  | struct vc7_driver_data *vc7; | 
|  | u8 xo_ib_h_div; | 
|  | u8 en_doubler; | 
|  | u16 apll_fb_div_int; | 
|  | u32 apll_fb_div_frac; | 
|  | }; | 
|  |  | 
|  | struct vc7_fod_data { | 
|  | struct clk_hw hw; | 
|  | struct vc7_driver_data *vc7; | 
|  | unsigned int num; | 
|  | u32 fod_1st_int; | 
|  | u32 fod_2nd_int; | 
|  | u64 fod_frac; | 
|  | }; | 
|  |  | 
|  | struct vc7_iod_data { | 
|  | struct clk_hw hw; | 
|  | struct vc7_driver_data *vc7; | 
|  | unsigned int num; | 
|  | u32 iod_int; | 
|  | }; | 
|  |  | 
|  | struct vc7_out_data { | 
|  | struct clk_hw hw; | 
|  | struct vc7_driver_data *vc7; | 
|  | unsigned int num; | 
|  | unsigned int out_dis; | 
|  | }; | 
|  |  | 
|  | struct vc7_driver_data { | 
|  | struct i2c_client *client; | 
|  | struct regmap *regmap; | 
|  | const struct vc7_chip_info *chip_info; | 
|  |  | 
|  | struct clk *pin_xin; | 
|  | struct vc7_apll_data clk_apll; | 
|  | struct vc7_fod_data clk_fod[VC7_NUM_FOD]; | 
|  | struct vc7_iod_data clk_iod[VC7_NUM_IOD]; | 
|  | struct vc7_out_data clk_out[VC7_NUM_OUT]; | 
|  | }; | 
|  |  | 
|  | struct vc7_bank_src_map { | 
|  | enum vc7_bank_src_type { | 
|  | VC7_FOD, | 
|  | VC7_IOD, | 
|  | } type; | 
|  | union _divider { | 
|  | struct vc7_iod_data *iod; | 
|  | struct vc7_fod_data *fod; | 
|  | } src; | 
|  | }; | 
|  |  | 
|  | static struct clk_hw *vc7_of_clk_get(struct of_phandle_args *clkspec, | 
|  | void *data) | 
|  | { | 
|  | struct vc7_driver_data *vc7 = data; | 
|  | unsigned int idx = clkspec->args[0]; | 
|  |  | 
|  | if (idx >= vc7->chip_info->num_outputs) | 
|  | return ERR_PTR(-EINVAL); | 
|  |  | 
|  | return &vc7->clk_out[idx].hw; | 
|  | } | 
|  |  | 
|  | static const unsigned int RC21008A_index_to_output_mapping[] = { | 
|  | 1, 2, 3, 6, 7, 8, 10, 11 | 
|  | }; | 
|  |  | 
|  | static int vc7_map_index_to_output(const enum vc7_model model, const unsigned int i) | 
|  | { | 
|  | switch (model) { | 
|  | case VC7_RC21008A: | 
|  | return RC21008A_index_to_output_mapping[i]; | 
|  | default: | 
|  | return i; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* bank to output mapping, same across all variants */ | 
|  | static const unsigned int output_bank_mapping[] = { | 
|  | 0, /* Output 0 */ | 
|  | 1, /* Output 1 */ | 
|  | 2, /* Output 2 */ | 
|  | 2, /* Output 3 */ | 
|  | 3, /* Output 4 */ | 
|  | 3, /* Output 5 */ | 
|  | 3, /* Output 6 */ | 
|  | 3, /* Output 7 */ | 
|  | 4, /* Output 8 */ | 
|  | 4, /* Output 9 */ | 
|  | 5, /* Output 10 */ | 
|  | 6  /* Output 11 */ | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * vc7_64_mul_64_to_128() - Multiply two u64 and return an unsigned 128-bit integer | 
|  | * as an upper and lower part. | 
|  | * | 
|  | * @left: The left argument. | 
|  | * @right: The right argument. | 
|  | * @hi: The upper 64-bits of the 128-bit product. | 
|  | * @lo: The lower 64-bits of the 128-bit product. | 
|  | * | 
|  | * From mul_64_64 in crypto/ecc.c:350 in the linux kernel, accessed in v5.17.2. | 
|  | */ | 
|  | static void vc7_64_mul_64_to_128(u64 left, u64 right, u64 *hi, u64 *lo) | 
|  | { | 
|  | u64 a0 = left & 0xffffffffull; | 
|  | u64 a1 = left >> 32; | 
|  | u64 b0 = right & 0xffffffffull; | 
|  | u64 b1 = right >> 32; | 
|  | u64 m0 = a0 * b0; | 
|  | u64 m1 = a0 * b1; | 
|  | u64 m2 = a1 * b0; | 
|  | u64 m3 = a1 * b1; | 
|  |  | 
|  | m2 += (m0 >> 32); | 
|  | m2 += m1; | 
|  |  | 
|  | /* Overflow */ | 
|  | if (m2 < m1) | 
|  | m3 += 0x100000000ull; | 
|  |  | 
|  | *lo = (m0 & 0xffffffffull) | (m2 << 32); | 
|  | *hi = m3 + (m2 >> 32); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vc7_128_div_64_to_64() - Divides a 128-bit uint by a 64-bit divisor, return a 64-bit quotient. | 
|  | * | 
|  | * @numhi: The uppper 64-bits of the dividend. | 
|  | * @numlo: The lower 64-bits of the dividend. | 
|  | * @den: The denominator (divisor). | 
|  | * @r: The remainder, pass NULL if the remainder is not needed. | 
|  | * | 
|  | * Originally from libdivide, modified to use kernel u64/u32 types. | 
|  | * | 
|  | * See https://github.com/ridiculousfish/libdivide/blob/master/libdivide.h#L471. | 
|  | * | 
|  | * Return: The 64-bit quotient of the division. | 
|  | * | 
|  | * In case of overflow of division by zero, max(u64) is returned. | 
|  | */ | 
|  | static u64 vc7_128_div_64_to_64(u64 numhi, u64 numlo, u64 den, u64 *r) | 
|  | { | 
|  | /* | 
|  | * We work in base 2**32. | 
|  | * A uint32 holds a single digit. A uint64 holds two digits. | 
|  | * Our numerator is conceptually [num3, num2, num1, num0]. | 
|  | * Our denominator is [den1, den0]. | 
|  | */ | 
|  | const u64 b = ((u64)1 << 32); | 
|  |  | 
|  | /* The high and low digits of our computed quotient. */ | 
|  | u32 q1, q0; | 
|  |  | 
|  | /* The normalization shift factor */ | 
|  | int shift; | 
|  |  | 
|  | /* | 
|  | * The high and low digits of our denominator (after normalizing). | 
|  | * Also the low 2 digits of our numerator (after normalizing). | 
|  | */ | 
|  | u32 den1, den0, num1, num0; | 
|  |  | 
|  | /* A partial remainder; */ | 
|  | u64 rem; | 
|  |  | 
|  | /* | 
|  | * The estimated quotient, and its corresponding remainder (unrelated | 
|  | * to true remainder). | 
|  | */ | 
|  | u64 qhat, rhat; | 
|  |  | 
|  | /* Variables used to correct the estimated quotient. */ | 
|  | u64 c1, c2; | 
|  |  | 
|  | /* Check for overflow and divide by 0. */ | 
|  | if (numhi >= den) { | 
|  | if (r) | 
|  | *r = ~0ull; | 
|  | return ~0ull; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Determine the normalization factor. We multiply den by this, so that | 
|  | * its leading digit is at least half b. In binary this means just | 
|  | * shifting left by the number of leading zeros, so that there's a 1 in | 
|  | * the MSB. | 
|  | * | 
|  | * We also shift numer by the same amount. This cannot overflow because | 
|  | * numhi < den.  The expression (-shift & 63) is the same as (64 - | 
|  | * shift), except it avoids the UB of shifting by 64. The funny bitwise | 
|  | * 'and' ensures that numlo does not get shifted into numhi if shift is | 
|  | * 0. clang 11 has an x86 codegen bug here: see LLVM bug 50118. The | 
|  | * sequence below avoids it. | 
|  | */ | 
|  | shift = __builtin_clzll(den); | 
|  | den <<= shift; | 
|  | numhi <<= shift; | 
|  | numhi |= (numlo >> (-shift & 63)) & (-(s64)shift >> 63); | 
|  | numlo <<= shift; | 
|  |  | 
|  | /* | 
|  | * Extract the low digits of the numerator and both digits of the | 
|  | * denominator. | 
|  | */ | 
|  | num1 = (u32)(numlo >> 32); | 
|  | num0 = (u32)(numlo & 0xFFFFFFFFu); | 
|  | den1 = (u32)(den >> 32); | 
|  | den0 = (u32)(den & 0xFFFFFFFFu); | 
|  |  | 
|  | /* | 
|  | * We wish to compute q1 = [n3 n2 n1] / [d1 d0]. | 
|  | * Estimate q1 as [n3 n2] / [d1], and then correct it. | 
|  | * Note while qhat may be 2 digits, q1 is always 1 digit. | 
|  | */ | 
|  | qhat = div64_u64_rem(numhi, den1, &rhat); | 
|  | c1 = qhat * den0; | 
|  | c2 = rhat * b + num1; | 
|  | if (c1 > c2) | 
|  | qhat -= (c1 - c2 > den) ? 2 : 1; | 
|  | q1 = (u32)qhat; | 
|  |  | 
|  | /* Compute the true (partial) remainder. */ | 
|  | rem = numhi * b + num1 - q1 * den; | 
|  |  | 
|  | /* | 
|  | * We wish to compute q0 = [rem1 rem0 n0] / [d1 d0]. | 
|  | * Estimate q0 as [rem1 rem0] / [d1] and correct it. | 
|  | */ | 
|  | qhat = div64_u64_rem(rem, den1, &rhat); | 
|  | c1 = qhat * den0; | 
|  | c2 = rhat * b + num0; | 
|  | if (c1 > c2) | 
|  | qhat -= (c1 - c2 > den) ? 2 : 1; | 
|  | q0 = (u32)qhat; | 
|  |  | 
|  | /* Return remainder if requested. */ | 
|  | if (r) | 
|  | *r = (rem * b + num0 - q0 * den) >> shift; | 
|  | return ((u64)q1 << 32) | q0; | 
|  | } | 
|  |  | 
|  | static int vc7_get_bank_clk(struct vc7_driver_data *vc7, | 
|  | unsigned int bank_idx, | 
|  | unsigned int output_bank_src, | 
|  | struct vc7_bank_src_map *map) | 
|  | { | 
|  | /* Mapping from Table 38 in datasheet */ | 
|  | if (bank_idx == 0 || bank_idx == 1) { | 
|  | switch (output_bank_src) { | 
|  | case 0: | 
|  | map->type = VC7_IOD, | 
|  | map->src.iod = &vc7->clk_iod[0]; | 
|  | return 0; | 
|  | case 1: | 
|  | map->type = VC7_IOD, | 
|  | map->src.iod = &vc7->clk_iod[1]; | 
|  | return 0; | 
|  | case 4: | 
|  | map->type = VC7_FOD, | 
|  | map->src.fod = &vc7->clk_fod[0]; | 
|  | return 0; | 
|  | case 5: | 
|  | map->type = VC7_FOD, | 
|  | map->src.fod = &vc7->clk_fod[1]; | 
|  | return 0; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } else if (bank_idx == 2) { | 
|  | switch (output_bank_src) { | 
|  | case 1: | 
|  | map->type = VC7_IOD, | 
|  | map->src.iod = &vc7->clk_iod[1]; | 
|  | return 0; | 
|  | case 4: | 
|  | map->type = VC7_FOD, | 
|  | map->src.fod = &vc7->clk_fod[0]; | 
|  | return 0; | 
|  | case 5: | 
|  | map->type = VC7_FOD, | 
|  | map->src.fod = &vc7->clk_fod[1]; | 
|  | return 0; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } else if (bank_idx == 3) { | 
|  | switch (output_bank_src) { | 
|  | case 4: | 
|  | map->type = VC7_FOD, | 
|  | map->src.fod = &vc7->clk_fod[0]; | 
|  | return 0; | 
|  | case 5: | 
|  | map->type = VC7_FOD, | 
|  | map->src.fod = &vc7->clk_fod[1]; | 
|  | return 0; | 
|  | case 6: | 
|  | map->type = VC7_FOD, | 
|  | map->src.fod = &vc7->clk_fod[2]; | 
|  | return 0; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } else if (bank_idx == 4) { | 
|  | switch (output_bank_src) { | 
|  | case 0: | 
|  | /* CLKIN1 not supported in this driver */ | 
|  | break; | 
|  | case 2: | 
|  | map->type = VC7_IOD, | 
|  | map->src.iod = &vc7->clk_iod[2]; | 
|  | return 0; | 
|  | case 5: | 
|  | map->type = VC7_FOD, | 
|  | map->src.fod = &vc7->clk_fod[1]; | 
|  | return 0; | 
|  | case 6: | 
|  | map->type = VC7_FOD, | 
|  | map->src.fod = &vc7->clk_fod[2]; | 
|  | return 0; | 
|  | case 7: | 
|  | /* CLKIN0 not supported in this driver */ | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } else if (bank_idx == 5) { | 
|  | switch (output_bank_src) { | 
|  | case 0: | 
|  | /* CLKIN1 not supported in this driver */ | 
|  | break; | 
|  | case 1: | 
|  | /* XIN_REFIN not supported in this driver */ | 
|  | break; | 
|  | case 2: | 
|  | map->type = VC7_IOD, | 
|  | map->src.iod = &vc7->clk_iod[2]; | 
|  | return 0; | 
|  | case 3: | 
|  | map->type = VC7_IOD, | 
|  | map->src.iod = &vc7->clk_iod[3]; | 
|  | return 0; | 
|  | case 5: | 
|  | map->type = VC7_FOD, | 
|  | map->src.fod = &vc7->clk_fod[1]; | 
|  | return 0; | 
|  | case 6: | 
|  | map->type = VC7_FOD, | 
|  | map->src.fod = &vc7->clk_fod[2]; | 
|  | return 0; | 
|  | case 7: | 
|  | /* CLKIN0 not supported in this driver */ | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } else if (bank_idx == 6) { | 
|  | switch (output_bank_src) { | 
|  | case 0: | 
|  | /* CLKIN1 not supported in this driver */ | 
|  | break; | 
|  | case 2: | 
|  | map->type = VC7_IOD, | 
|  | map->src.iod = &vc7->clk_iod[2]; | 
|  | return 0; | 
|  | case 3: | 
|  | map->type = VC7_IOD, | 
|  | map->src.iod = &vc7->clk_iod[3]; | 
|  | return 0; | 
|  | case 5: | 
|  | map->type = VC7_FOD, | 
|  | map->src.fod = &vc7->clk_fod[1]; | 
|  | return 0; | 
|  | case 6: | 
|  | map->type = VC7_FOD, | 
|  | map->src.fod = &vc7->clk_fod[2]; | 
|  | return 0; | 
|  | case 7: | 
|  | /* CLKIN0 not supported in this driver */ | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | pr_warn("bank_src%d = %d is not supported\n", bank_idx, output_bank_src); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int vc7_read_apll(struct vc7_driver_data *vc7) | 
|  | { | 
|  | int err; | 
|  | u32 val32; | 
|  | u16 val16; | 
|  |  | 
|  | err = regmap_bulk_read(vc7->regmap, | 
|  | VC7_REG_XO_CNFG, | 
|  | (u32 *)&val32, | 
|  | VC7_REG_XO_CNFG_COUNT); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "failed to read XO_CNFG\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | vc7->clk_apll.xo_ib_h_div = (val32 & VC7_REG_XO_IB_H_DIV_MASK) | 
|  | >> VC7_REG_XO_IB_H_DIV_SHIFT; | 
|  |  | 
|  | err = regmap_read(vc7->regmap, | 
|  | VC7_REG_APLL_CNFG, | 
|  | &val32); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "failed to read APLL_CNFG\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | vc7->clk_apll.en_doubler = val32 & VC7_REG_APLL_EN_DOUBLER; | 
|  |  | 
|  | err = regmap_bulk_read(vc7->regmap, | 
|  | VC7_REG_APLL_FB_DIV_FRAC, | 
|  | (u32 *)&val32, | 
|  | VC7_REG_APLL_FB_DIV_FRAC_COUNT); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "failed to read APLL_FB_DIV_FRAC\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | vc7->clk_apll.apll_fb_div_frac = val32 & VC7_REG_APLL_FB_DIV_FRAC_MASK; | 
|  |  | 
|  | err = regmap_bulk_read(vc7->regmap, | 
|  | VC7_REG_APLL_FB_DIV_INT, | 
|  | (u16 *)&val16, | 
|  | VC7_REG_APLL_FB_DIV_INT_COUNT); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "failed to read APLL_FB_DIV_INT\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | vc7->clk_apll.apll_fb_div_int = val16 & VC7_REG_APLL_FB_DIV_INT_MASK; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vc7_read_fod(struct vc7_driver_data *vc7, unsigned int idx) | 
|  | { | 
|  | int err; | 
|  | u64 val; | 
|  |  | 
|  | err = regmap_bulk_read(vc7->regmap, | 
|  | VC7_REG_FOD_INT_CNFG(idx), | 
|  | (u64 *)&val, | 
|  | VC7_REG_FOD_INT_CNFG_COUNT); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "failed to read FOD%d\n", idx); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | vc7->clk_fod[idx].fod_1st_int = (val & VC7_REG_FOD_1ST_INT_MASK); | 
|  | vc7->clk_fod[idx].fod_2nd_int = | 
|  | (val & VC7_REG_FOD_2ND_INT_MASK) >> VC7_REG_FOD_2ND_INT_SHIFT; | 
|  | vc7->clk_fod[idx].fod_frac = (val & VC7_REG_FOD_FRAC_MASK) | 
|  | >> VC7_REG_FOD_FRAC_SHIFT; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vc7_write_fod(struct vc7_driver_data *vc7, unsigned int idx) | 
|  | { | 
|  | int err; | 
|  | u64 val; | 
|  |  | 
|  | /* | 
|  | * FOD dividers are part of an atomic group where fod_1st_int, | 
|  | * fod_2nd_int, and fod_frac must be written together. The new divider | 
|  | * is applied when the MSB of fod_frac is written. | 
|  | */ | 
|  |  | 
|  | err = regmap_bulk_read(vc7->regmap, | 
|  | VC7_REG_FOD_INT_CNFG(idx), | 
|  | (u64 *)&val, | 
|  | VC7_REG_FOD_INT_CNFG_COUNT); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "failed to read FOD%d\n", idx); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | val = u64_replace_bits(val, | 
|  | vc7->clk_fod[idx].fod_1st_int, | 
|  | VC7_REG_FOD_1ST_INT_MASK); | 
|  | val = u64_replace_bits(val, | 
|  | vc7->clk_fod[idx].fod_2nd_int, | 
|  | VC7_REG_FOD_2ND_INT_MASK); | 
|  | val = u64_replace_bits(val, | 
|  | vc7->clk_fod[idx].fod_frac, | 
|  | VC7_REG_FOD_FRAC_MASK); | 
|  |  | 
|  | err = regmap_bulk_write(vc7->regmap, | 
|  | VC7_REG_FOD_INT_CNFG(idx), | 
|  | (u64 *)&val, | 
|  | sizeof(u64)); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "failed to write FOD%d\n", idx); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vc7_read_iod(struct vc7_driver_data *vc7, unsigned int idx) | 
|  | { | 
|  | int err; | 
|  | u32 val; | 
|  |  | 
|  | err = regmap_bulk_read(vc7->regmap, | 
|  | VC7_REG_IOD_INT_CNFG(idx), | 
|  | (u32 *)&val, | 
|  | VC7_REG_IOD_INT_CNFG_COUNT); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "failed to read IOD%d\n", idx); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | vc7->clk_iod[idx].iod_int = (val & VC7_REG_IOD_INT_MASK); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vc7_write_iod(struct vc7_driver_data *vc7, unsigned int idx) | 
|  | { | 
|  | int err; | 
|  | u32 val; | 
|  |  | 
|  | /* | 
|  | * IOD divider field is atomic and all bits must be written. | 
|  | * The new divider is applied when the MSB of iod_int is written. | 
|  | */ | 
|  |  | 
|  | err = regmap_bulk_read(vc7->regmap, | 
|  | VC7_REG_IOD_INT_CNFG(idx), | 
|  | (u32 *)&val, | 
|  | VC7_REG_IOD_INT_CNFG_COUNT); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "failed to read IOD%d\n", idx); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | val = u32_replace_bits(val, | 
|  | vc7->clk_iod[idx].iod_int, | 
|  | VC7_REG_IOD_INT_MASK); | 
|  |  | 
|  | err = regmap_bulk_write(vc7->regmap, | 
|  | VC7_REG_IOD_INT_CNFG(idx), | 
|  | (u32 *)&val, | 
|  | sizeof(u32)); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "failed to write IOD%d\n", idx); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vc7_read_output(struct vc7_driver_data *vc7, unsigned int idx) | 
|  | { | 
|  | int err; | 
|  | unsigned int val, out_num; | 
|  |  | 
|  | out_num = vc7_map_index_to_output(vc7->chip_info->model, idx); | 
|  | err = regmap_read(vc7->regmap, | 
|  | VC7_REG_ODRV_EN(out_num), | 
|  | &val); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "failed to read ODRV_EN[%d]\n", idx); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | vc7->clk_out[idx].out_dis = val & VC7_REG_OUT_DIS; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vc7_write_output(struct vc7_driver_data *vc7, unsigned int idx) | 
|  | { | 
|  | int err; | 
|  | unsigned int out_num; | 
|  |  | 
|  | out_num = vc7_map_index_to_output(vc7->chip_info->model, idx); | 
|  | err = regmap_write_bits(vc7->regmap, | 
|  | VC7_REG_ODRV_EN(out_num), | 
|  | VC7_REG_OUT_DIS, | 
|  | vc7->clk_out[idx].out_dis); | 
|  |  | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "failed to write ODRV_EN[%d]\n", idx); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static unsigned long vc7_get_apll_rate(struct vc7_driver_data *vc7) | 
|  | { | 
|  | int err; | 
|  | unsigned long xtal_rate; | 
|  | u64 refin_div, apll_rate; | 
|  |  | 
|  | xtal_rate = clk_get_rate(vc7->pin_xin); | 
|  | err = vc7_read_apll(vc7); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "unable to read apll\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* 0 is bypassed, 1 is reserved */ | 
|  | if (vc7->clk_apll.xo_ib_h_div < 2) | 
|  | refin_div = xtal_rate; | 
|  | else | 
|  | refin_div = div64_u64(xtal_rate, vc7->clk_apll.xo_ib_h_div); | 
|  |  | 
|  | if (vc7->clk_apll.en_doubler) | 
|  | refin_div *= 2; | 
|  |  | 
|  | /* divider = int + (frac / 2^27) */ | 
|  | apll_rate = (refin_div * vc7->clk_apll.apll_fb_div_int) + | 
|  | ((refin_div * vc7->clk_apll.apll_fb_div_frac) >> VC7_APLL_DENOMINATOR_BITS); | 
|  |  | 
|  | pr_debug("%s - xo_ib_h_div: %u, apll_fb_div_int: %u, apll_fb_div_frac: %u\n", | 
|  | __func__, vc7->clk_apll.xo_ib_h_div, vc7->clk_apll.apll_fb_div_int, | 
|  | vc7->clk_apll.apll_fb_div_frac); | 
|  | pr_debug("%s - refin_div: %llu, apll rate: %llu\n", | 
|  | __func__, refin_div, apll_rate); | 
|  |  | 
|  | return apll_rate; | 
|  | } | 
|  |  | 
|  | static void vc7_calc_iod_divider(unsigned long rate, unsigned long parent_rate, | 
|  | u32 *divider) | 
|  | { | 
|  | *divider = DIV_ROUND_UP(parent_rate, rate); | 
|  | if (*divider < VC7_IOD_MIN_DIVISOR) | 
|  | *divider = VC7_IOD_MIN_DIVISOR; | 
|  | if (*divider > VC7_IOD_MAX_DIVISOR) | 
|  | *divider = VC7_IOD_MAX_DIVISOR; | 
|  | } | 
|  |  | 
|  | static void vc7_calc_fod_1st_stage(unsigned long rate, unsigned long parent_rate, | 
|  | u32 *div_int, u64 *div_frac) | 
|  | { | 
|  | u64 rem; | 
|  |  | 
|  | *div_int = (u32)div64_u64_rem(parent_rate, rate, &rem); | 
|  | *div_frac = div64_u64(rem << VC7_FOD_DENOMINATOR_BITS, rate); | 
|  | } | 
|  |  | 
|  | static unsigned long vc7_calc_fod_1st_stage_rate(unsigned long parent_rate, | 
|  | u32 fod_1st_int, u64 fod_frac) | 
|  | { | 
|  | u64 numer, denom, hi, lo, divisor; | 
|  |  | 
|  | numer = fod_frac; | 
|  | denom = BIT_ULL(VC7_FOD_DENOMINATOR_BITS); | 
|  |  | 
|  | if (fod_frac) { | 
|  | vc7_64_mul_64_to_128(parent_rate, denom, &hi, &lo); | 
|  | divisor = ((u64)fod_1st_int * denom) + numer; | 
|  | return vc7_128_div_64_to_64(hi, lo, divisor, NULL); | 
|  | } | 
|  |  | 
|  | return div64_u64(parent_rate, fod_1st_int); | 
|  | } | 
|  |  | 
|  | static unsigned long vc7_calc_fod_2nd_stage_rate(unsigned long parent_rate, | 
|  | u32 fod_1st_int, u32 fod_2nd_int, u64 fod_frac) | 
|  | { | 
|  | unsigned long fod_1st_stage_rate; | 
|  |  | 
|  | fod_1st_stage_rate = vc7_calc_fod_1st_stage_rate(parent_rate, fod_1st_int, fod_frac); | 
|  |  | 
|  | if (fod_2nd_int < 2) | 
|  | return fod_1st_stage_rate; | 
|  |  | 
|  | /* | 
|  | * There is a div-by-2 preceding the 2nd stage integer divider | 
|  | * (not shown on block diagram) so the actual 2nd stage integer | 
|  | * divisor is 2 * N. | 
|  | */ | 
|  | return div64_u64(fod_1st_stage_rate >> 1, fod_2nd_int); | 
|  | } | 
|  |  | 
|  | static void vc7_calc_fod_divider(unsigned long rate, unsigned long parent_rate, | 
|  | u32 *fod_1st_int, u32 *fod_2nd_int, u64 *fod_frac) | 
|  | { | 
|  | unsigned int allow_frac, i, best_frac_i; | 
|  | unsigned long first_stage_rate; | 
|  |  | 
|  | vc7_calc_fod_1st_stage(rate, parent_rate, fod_1st_int, fod_frac); | 
|  | first_stage_rate = vc7_calc_fod_1st_stage_rate(parent_rate, *fod_1st_int, *fod_frac); | 
|  |  | 
|  | *fod_2nd_int = 0; | 
|  |  | 
|  | /* Do we need the second stage integer divider? */ | 
|  | if (first_stage_rate < VC7_FOD_1ST_STAGE_RATE_MIN) { | 
|  | allow_frac = 0; | 
|  | best_frac_i = VC7_FOD_2ND_INT_MIN; | 
|  |  | 
|  | for (i = VC7_FOD_2ND_INT_MIN; i <= VC7_FOD_2ND_INT_MAX; i++) { | 
|  | /* | 
|  | * 1) There is a div-by-2 preceding the 2nd stage integer divider | 
|  | *    (not shown on block diagram) so the actual 2nd stage integer | 
|  | *    divisor is 2 * N. | 
|  | * 2) Attempt to find an integer solution first. This means stepping | 
|  | *    through each 2nd stage integer and recalculating the 1st stage | 
|  | *    until the 1st stage frequency is out of bounds. If no integer | 
|  | *    solution is found, use the best fractional solution. | 
|  | */ | 
|  | vc7_calc_fod_1st_stage(parent_rate, rate * 2 * i, fod_1st_int, fod_frac); | 
|  | first_stage_rate = vc7_calc_fod_1st_stage_rate(parent_rate, | 
|  | *fod_1st_int, | 
|  | *fod_frac); | 
|  |  | 
|  | /* Remember the first viable fractional solution */ | 
|  | if (best_frac_i == VC7_FOD_2ND_INT_MIN && | 
|  | first_stage_rate > VC7_FOD_1ST_STAGE_RATE_MIN) { | 
|  | best_frac_i = i; | 
|  | } | 
|  |  | 
|  | /* Is the divider viable? Prefer integer solutions over fractional. */ | 
|  | if (*fod_1st_int < VC7_FOD_1ST_INT_MAX && | 
|  | first_stage_rate >= VC7_FOD_1ST_STAGE_RATE_MIN && | 
|  | (allow_frac || *fod_frac == 0)) { | 
|  | *fod_2nd_int = i; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Ran out of divisors or the 1st stage frequency is out of range */ | 
|  | if (i >= VC7_FOD_2ND_INT_MAX || | 
|  | first_stage_rate > VC7_FOD_1ST_STAGE_RATE_MAX) { | 
|  | allow_frac = 1; | 
|  | i = best_frac_i; | 
|  |  | 
|  | /* Restore the best frac and rerun the loop for the last time */ | 
|  | if (best_frac_i != VC7_FOD_2ND_INT_MIN) | 
|  | i--; | 
|  |  | 
|  | continue; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static unsigned long vc7_fod_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) | 
|  | { | 
|  | struct vc7_fod_data *fod = container_of(hw, struct vc7_fod_data, hw); | 
|  | struct vc7_driver_data *vc7 = fod->vc7; | 
|  | int err; | 
|  | unsigned long fod_rate; | 
|  |  | 
|  | err = vc7_read_fod(vc7, fod->num); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "error reading registers for %s\n", | 
|  | clk_hw_get_name(hw)); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | pr_debug("%s - %s: parent_rate: %lu\n", __func__, clk_hw_get_name(hw), parent_rate); | 
|  |  | 
|  | fod_rate = vc7_calc_fod_2nd_stage_rate(parent_rate, fod->fod_1st_int, | 
|  | fod->fod_2nd_int, fod->fod_frac); | 
|  |  | 
|  | pr_debug("%s - %s: fod_1st_int: %u, fod_2nd_int: %u, fod_frac: %llu\n", | 
|  | __func__, clk_hw_get_name(hw), | 
|  | fod->fod_1st_int, fod->fod_2nd_int, fod->fod_frac); | 
|  | pr_debug("%s - %s rate: %lu\n", __func__, clk_hw_get_name(hw), fod_rate); | 
|  |  | 
|  | return fod_rate; | 
|  | } | 
|  |  | 
|  | static int vc7_fod_determine_rate(struct clk_hw *hw, | 
|  | struct clk_rate_request *req) | 
|  | { | 
|  | struct vc7_fod_data *fod = container_of(hw, struct vc7_fod_data, hw); | 
|  | unsigned long fod_rate; | 
|  |  | 
|  | pr_debug("%s - %s: requested rate: %lu, parent_rate: %lu\n", | 
|  | __func__, clk_hw_get_name(hw), req->rate, req->best_parent_rate); | 
|  |  | 
|  | vc7_calc_fod_divider(req->rate, req->best_parent_rate, | 
|  | &fod->fod_1st_int, &fod->fod_2nd_int, &fod->fod_frac); | 
|  | fod_rate = vc7_calc_fod_2nd_stage_rate(req->best_parent_rate, fod->fod_1st_int, | 
|  | fod->fod_2nd_int, fod->fod_frac); | 
|  |  | 
|  | pr_debug("%s - %s: fod_1st_int: %u, fod_2nd_int: %u, fod_frac: %llu\n", | 
|  | __func__, clk_hw_get_name(hw), | 
|  | fod->fod_1st_int, fod->fod_2nd_int, fod->fod_frac); | 
|  | pr_debug("%s - %s rate: %lu\n", __func__, clk_hw_get_name(hw), fod_rate); | 
|  |  | 
|  | req->rate = fod_rate; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vc7_fod_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) | 
|  | { | 
|  | struct vc7_fod_data *fod = container_of(hw, struct vc7_fod_data, hw); | 
|  | struct vc7_driver_data *vc7 = fod->vc7; | 
|  | unsigned long fod_rate; | 
|  |  | 
|  | pr_debug("%s - %s: rate: %lu, parent_rate: %lu\n", | 
|  | __func__, clk_hw_get_name(hw), rate, parent_rate); | 
|  |  | 
|  | if (rate < VC7_FOD_RATE_MIN || rate > VC7_FOD_RATE_MAX) { | 
|  | dev_err(&vc7->client->dev, | 
|  | "requested frequency %lu Hz for %s is out of range\n", | 
|  | rate, clk_hw_get_name(hw)); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | vc7_write_fod(vc7, fod->num); | 
|  |  | 
|  | fod_rate = vc7_calc_fod_2nd_stage_rate(parent_rate, fod->fod_1st_int, | 
|  | fod->fod_2nd_int, fod->fod_frac); | 
|  |  | 
|  | pr_debug("%s - %s: fod_1st_int: %u, fod_2nd_int: %u, fod_frac: %llu\n", | 
|  | __func__, clk_hw_get_name(hw), | 
|  | fod->fod_1st_int, fod->fod_2nd_int, fod->fod_frac); | 
|  | pr_debug("%s - %s rate: %lu\n", __func__, clk_hw_get_name(hw), fod_rate); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct clk_ops vc7_fod_ops = { | 
|  | .recalc_rate = vc7_fod_recalc_rate, | 
|  | .determine_rate = vc7_fod_determine_rate, | 
|  | .set_rate = vc7_fod_set_rate, | 
|  | }; | 
|  |  | 
|  | static unsigned long vc7_iod_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) | 
|  | { | 
|  | struct vc7_iod_data *iod = container_of(hw, struct vc7_iod_data, hw); | 
|  | struct vc7_driver_data *vc7 = iod->vc7; | 
|  | int err; | 
|  | unsigned long iod_rate; | 
|  |  | 
|  | err = vc7_read_iod(vc7, iod->num); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "error reading registers for %s\n", | 
|  | clk_hw_get_name(hw)); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | iod_rate = div64_u64(parent_rate, iod->iod_int); | 
|  |  | 
|  | pr_debug("%s - %s: iod_int: %u\n", __func__, clk_hw_get_name(hw), iod->iod_int); | 
|  | pr_debug("%s - %s rate: %lu\n", __func__, clk_hw_get_name(hw), iod_rate); | 
|  |  | 
|  | return iod_rate; | 
|  | } | 
|  |  | 
|  | static int vc7_iod_determine_rate(struct clk_hw *hw, | 
|  | struct clk_rate_request *req) | 
|  | { | 
|  | struct vc7_iod_data *iod = container_of(hw, struct vc7_iod_data, hw); | 
|  | unsigned long iod_rate; | 
|  |  | 
|  | pr_debug("%s - %s: requested rate: %lu, parent_rate: %lu\n", | 
|  | __func__, clk_hw_get_name(hw), req->rate, req->best_parent_rate); | 
|  |  | 
|  | vc7_calc_iod_divider(req->rate, req->best_parent_rate, &iod->iod_int); | 
|  | iod_rate = div64_u64(req->best_parent_rate, iod->iod_int); | 
|  |  | 
|  | pr_debug("%s - %s: iod_int: %u\n", __func__, clk_hw_get_name(hw), iod->iod_int); | 
|  | pr_debug("%s - %s rate: %ld\n", __func__, clk_hw_get_name(hw), iod_rate); | 
|  |  | 
|  | req->rate = iod_rate; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vc7_iod_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) | 
|  | { | 
|  | struct vc7_iod_data *iod = container_of(hw, struct vc7_iod_data, hw); | 
|  | struct vc7_driver_data *vc7 = iod->vc7; | 
|  | unsigned long iod_rate; | 
|  |  | 
|  | pr_debug("%s - %s: rate: %lu, parent_rate: %lu\n", | 
|  | __func__, clk_hw_get_name(hw), rate, parent_rate); | 
|  |  | 
|  | if (rate < VC7_IOD_RATE_MIN || rate > VC7_IOD_RATE_MAX) { | 
|  | dev_err(&vc7->client->dev, | 
|  | "requested frequency %lu Hz for %s is out of range\n", | 
|  | rate, clk_hw_get_name(hw)); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | vc7_write_iod(vc7, iod->num); | 
|  |  | 
|  | iod_rate = div64_u64(parent_rate, iod->iod_int); | 
|  |  | 
|  | pr_debug("%s - %s: iod_int: %u\n", __func__, clk_hw_get_name(hw), iod->iod_int); | 
|  | pr_debug("%s - %s rate: %ld\n", __func__, clk_hw_get_name(hw), iod_rate); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct clk_ops vc7_iod_ops = { | 
|  | .recalc_rate = vc7_iod_recalc_rate, | 
|  | .determine_rate = vc7_iod_determine_rate, | 
|  | .set_rate = vc7_iod_set_rate, | 
|  | }; | 
|  |  | 
|  | static int vc7_clk_out_prepare(struct clk_hw *hw) | 
|  | { | 
|  | struct vc7_out_data *out = container_of(hw, struct vc7_out_data, hw); | 
|  | struct vc7_driver_data *vc7 = out->vc7; | 
|  | int err; | 
|  |  | 
|  | out->out_dis = 0; | 
|  |  | 
|  | err = vc7_write_output(vc7, out->num); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "error writing registers for %s\n", | 
|  | clk_hw_get_name(hw)); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | pr_debug("%s - %s: clk prepared\n", __func__, clk_hw_get_name(hw)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void vc7_clk_out_unprepare(struct clk_hw *hw) | 
|  | { | 
|  | struct vc7_out_data *out = container_of(hw, struct vc7_out_data, hw); | 
|  | struct vc7_driver_data *vc7 = out->vc7; | 
|  | int err; | 
|  |  | 
|  | out->out_dis = 1; | 
|  |  | 
|  | err = vc7_write_output(vc7, out->num); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "error writing registers for %s\n", | 
|  | clk_hw_get_name(hw)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | pr_debug("%s - %s: clk unprepared\n", __func__, clk_hw_get_name(hw)); | 
|  | } | 
|  |  | 
|  | static int vc7_clk_out_is_enabled(struct clk_hw *hw) | 
|  | { | 
|  | struct vc7_out_data *out = container_of(hw, struct vc7_out_data, hw); | 
|  | struct vc7_driver_data *vc7 = out->vc7; | 
|  | int err, is_enabled; | 
|  |  | 
|  | err = vc7_read_output(vc7, out->num); | 
|  | if (err) { | 
|  | dev_err(&vc7->client->dev, "error reading registers for %s\n", | 
|  | clk_hw_get_name(hw)); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | is_enabled = !out->out_dis; | 
|  |  | 
|  | pr_debug("%s - %s: is_enabled=%d\n", __func__, clk_hw_get_name(hw), is_enabled); | 
|  |  | 
|  | return is_enabled; | 
|  | } | 
|  |  | 
|  | static const struct clk_ops vc7_clk_out_ops = { | 
|  | .prepare = vc7_clk_out_prepare, | 
|  | .unprepare = vc7_clk_out_unprepare, | 
|  | .is_enabled = vc7_clk_out_is_enabled, | 
|  | }; | 
|  |  | 
|  | static int vc7_probe(struct i2c_client *client) | 
|  | { | 
|  | struct vc7_driver_data *vc7; | 
|  | struct clk_init_data clk_init; | 
|  | struct vc7_bank_src_map bank_src_map; | 
|  | const char *node_name, *apll_name; | 
|  | const char *parent_names[1]; | 
|  | unsigned int i, val, bank_idx, out_num; | 
|  | unsigned long apll_rate; | 
|  | int ret; | 
|  |  | 
|  | vc7 = devm_kzalloc(&client->dev, sizeof(*vc7), GFP_KERNEL); | 
|  | if (!vc7) | 
|  | return -ENOMEM; | 
|  |  | 
|  | i2c_set_clientdata(client, vc7); | 
|  | vc7->client = client; | 
|  | vc7->chip_info = i2c_get_match_data(client); | 
|  |  | 
|  | vc7->pin_xin = devm_clk_get(&client->dev, "xin"); | 
|  | if (PTR_ERR(vc7->pin_xin) == -EPROBE_DEFER) { | 
|  | return dev_err_probe(&client->dev, -EPROBE_DEFER, | 
|  | "xin not specified\n"); | 
|  | } | 
|  |  | 
|  | vc7->regmap = devm_regmap_init_i2c(client, &vc7_regmap_config); | 
|  | if (IS_ERR(vc7->regmap)) { | 
|  | return dev_err_probe(&client->dev, PTR_ERR(vc7->regmap), | 
|  | "failed to allocate register map\n"); | 
|  | } | 
|  |  | 
|  | if (of_property_read_string(client->dev.of_node, "clock-output-names", | 
|  | &node_name)) | 
|  | node_name = client->dev.of_node->name; | 
|  |  | 
|  | /* Register APLL */ | 
|  | apll_rate = vc7_get_apll_rate(vc7); | 
|  | apll_name = kasprintf(GFP_KERNEL, "%s_apll", node_name); | 
|  | vc7->clk_apll.clk = clk_register_fixed_rate(&client->dev, apll_name, | 
|  | __clk_get_name(vc7->pin_xin), | 
|  | 0, apll_rate); | 
|  | kfree(apll_name); /* ccf made a copy of the name */ | 
|  | if (IS_ERR(vc7->clk_apll.clk)) { | 
|  | return dev_err_probe(&client->dev, PTR_ERR(vc7->clk_apll.clk), | 
|  | "failed to register apll\n"); | 
|  | } | 
|  |  | 
|  | /* Register FODs */ | 
|  | for (i = 0; i < VC7_NUM_FOD; i++) { | 
|  | memset(&clk_init, 0, sizeof(clk_init)); | 
|  | clk_init.name = kasprintf(GFP_KERNEL, "%s_fod%d", node_name, i); | 
|  | clk_init.ops = &vc7_fod_ops; | 
|  | clk_init.parent_names = parent_names; | 
|  | parent_names[0] = __clk_get_name(vc7->clk_apll.clk); | 
|  | clk_init.num_parents = 1; | 
|  | vc7->clk_fod[i].num = i; | 
|  | vc7->clk_fod[i].vc7 = vc7; | 
|  | vc7->clk_fod[i].hw.init = &clk_init; | 
|  | ret = devm_clk_hw_register(&client->dev, &vc7->clk_fod[i].hw); | 
|  | if (ret) | 
|  | goto err_clk_register; | 
|  | kfree(clk_init.name); /* ccf made a copy of the name */ | 
|  | } | 
|  |  | 
|  | /* Register IODs */ | 
|  | for (i = 0; i < VC7_NUM_IOD; i++) { | 
|  | memset(&clk_init, 0, sizeof(clk_init)); | 
|  | clk_init.name = kasprintf(GFP_KERNEL, "%s_iod%d", node_name, i); | 
|  | clk_init.ops = &vc7_iod_ops; | 
|  | clk_init.parent_names = parent_names; | 
|  | parent_names[0] = __clk_get_name(vc7->clk_apll.clk); | 
|  | clk_init.num_parents = 1; | 
|  | vc7->clk_iod[i].num = i; | 
|  | vc7->clk_iod[i].vc7 = vc7; | 
|  | vc7->clk_iod[i].hw.init = &clk_init; | 
|  | ret = devm_clk_hw_register(&client->dev, &vc7->clk_iod[i].hw); | 
|  | if (ret) | 
|  | goto err_clk_register; | 
|  | kfree(clk_init.name); /* ccf made a copy of the name */ | 
|  | } | 
|  |  | 
|  | /* Register outputs */ | 
|  | for (i = 0; i < vc7->chip_info->num_outputs; i++) { | 
|  | out_num = vc7_map_index_to_output(vc7->chip_info->model, i); | 
|  |  | 
|  | /* | 
|  | * This driver does not support remapping FOD/IOD to banks. | 
|  | * The device state is read and the driver is setup to match | 
|  | * the device's existing mapping. | 
|  | */ | 
|  | bank_idx = output_bank_mapping[out_num]; | 
|  |  | 
|  | regmap_read(vc7->regmap, VC7_REG_OUT_BANK_CNFG(bank_idx), &val); | 
|  | val &= VC7_REG_OUTPUT_BANK_SRC_MASK; | 
|  |  | 
|  | memset(&bank_src_map, 0, sizeof(bank_src_map)); | 
|  | ret = vc7_get_bank_clk(vc7, bank_idx, val, &bank_src_map); | 
|  | if (ret) { | 
|  | dev_err_probe(&client->dev, ret, | 
|  | "unable to register output %d\n", i); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | switch (bank_src_map.type) { | 
|  | case VC7_FOD: | 
|  | parent_names[0] = clk_hw_get_name(&bank_src_map.src.fod->hw); | 
|  | break; | 
|  | case VC7_IOD: | 
|  | parent_names[0] = clk_hw_get_name(&bank_src_map.src.iod->hw); | 
|  | break; | 
|  | } | 
|  |  | 
|  | memset(&clk_init, 0, sizeof(clk_init)); | 
|  | clk_init.name = kasprintf(GFP_KERNEL, "%s_out%d", node_name, i); | 
|  | clk_init.ops = &vc7_clk_out_ops; | 
|  | clk_init.flags = CLK_SET_RATE_PARENT; | 
|  | clk_init.parent_names = parent_names; | 
|  | clk_init.num_parents = 1; | 
|  | vc7->clk_out[i].num = i; | 
|  | vc7->clk_out[i].vc7 = vc7; | 
|  | vc7->clk_out[i].hw.init = &clk_init; | 
|  | ret = devm_clk_hw_register(&client->dev, &vc7->clk_out[i].hw); | 
|  | if (ret) | 
|  | goto err_clk_register; | 
|  | kfree(clk_init.name); /* ccf made a copy of the name */ | 
|  | } | 
|  |  | 
|  | ret = of_clk_add_hw_provider(client->dev.of_node, vc7_of_clk_get, vc7); | 
|  | if (ret) { | 
|  | dev_err_probe(&client->dev, ret, "unable to add clk provider\n"); | 
|  | goto err_clk; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | err_clk_register: | 
|  | dev_err_probe(&client->dev, ret, | 
|  | "unable to register %s\n", clk_init.name); | 
|  | kfree(clk_init.name); /* ccf made a copy of the name */ | 
|  | err_clk: | 
|  | clk_unregister_fixed_rate(vc7->clk_apll.clk); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void vc7_remove(struct i2c_client *client) | 
|  | { | 
|  | struct vc7_driver_data *vc7 = i2c_get_clientdata(client); | 
|  |  | 
|  | of_clk_del_provider(client->dev.of_node); | 
|  | clk_unregister_fixed_rate(vc7->clk_apll.clk); | 
|  | } | 
|  |  | 
|  | static bool vc7_volatile_reg(struct device *dev, unsigned int reg) | 
|  | { | 
|  | if (reg == VC7_PAGE_ADDR) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static const struct vc7_chip_info vc7_rc21008a_info = { | 
|  | .model = VC7_RC21008A, | 
|  | .num_banks = 6, | 
|  | .num_outputs = 8, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range_cfg vc7_range_cfg[] = { | 
|  | { | 
|  | .range_min = 0, | 
|  | .range_max = VC7_MAX_REG, | 
|  | .selector_reg = VC7_PAGE_ADDR, | 
|  | .selector_mask = 0xFF, | 
|  | .selector_shift = 0, | 
|  | .window_start = 0, | 
|  | .window_len = VC7_PAGE_WINDOW, | 
|  | }}; | 
|  |  | 
|  | static const struct regmap_config vc7_regmap_config = { | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .max_register = VC7_MAX_REG, | 
|  | .ranges = vc7_range_cfg, | 
|  | .num_ranges = ARRAY_SIZE(vc7_range_cfg), | 
|  | .volatile_reg = vc7_volatile_reg, | 
|  | .cache_type = REGCACHE_MAPLE, | 
|  | .can_multi_write = true, | 
|  | .reg_format_endian = REGMAP_ENDIAN_LITTLE, | 
|  | .val_format_endian = REGMAP_ENDIAN_LITTLE, | 
|  | }; | 
|  |  | 
|  | static const struct i2c_device_id vc7_i2c_id[] = { | 
|  | { "rc21008a", .driver_data = (kernel_ulong_t)&vc7_rc21008a_info }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, vc7_i2c_id); | 
|  |  | 
|  | static const struct of_device_id vc7_of_match[] = { | 
|  | { .compatible = "renesas,rc21008a", .data = &vc7_rc21008a_info }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, vc7_of_match); | 
|  |  | 
|  | static struct i2c_driver vc7_i2c_driver = { | 
|  | .driver = { | 
|  | .name = "vc7", | 
|  | .of_match_table = vc7_of_match, | 
|  | }, | 
|  | .probe = vc7_probe, | 
|  | .remove = vc7_remove, | 
|  | .id_table = vc7_i2c_id, | 
|  | }; | 
|  | module_i2c_driver(vc7_i2c_driver); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Alex Helms <alexander.helms.jy@renesas.com"); | 
|  | MODULE_DESCRIPTION("Renesas Versaclock7 common clock framework driver"); |