| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  *  HID driver for Sony DualSense(TM) controller. | 
 |  * | 
 |  *  Copyright (c) 2020-2022 Sony Interactive Entertainment | 
 |  */ | 
 |  | 
 | #include <linux/bits.h> | 
 | #include <linux/crc32.h> | 
 | #include <linux/device.h> | 
 | #include <linux/hid.h> | 
 | #include <linux/idr.h> | 
 | #include <linux/input/mt.h> | 
 | #include <linux/leds.h> | 
 | #include <linux/led-class-multicolor.h> | 
 | #include <linux/module.h> | 
 |  | 
 | #include <asm/unaligned.h> | 
 |  | 
 | #include "hid-ids.h" | 
 |  | 
 | /* List of connected playstation devices. */ | 
 | static DEFINE_MUTEX(ps_devices_lock); | 
 | static LIST_HEAD(ps_devices_list); | 
 |  | 
 | static DEFINE_IDA(ps_player_id_allocator); | 
 |  | 
 | #define HID_PLAYSTATION_VERSION_PATCH 0x8000 | 
 |  | 
 | enum PS_TYPE { | 
 | 	PS_TYPE_PS4_DUALSHOCK4, | 
 | 	PS_TYPE_PS5_DUALSENSE, | 
 | }; | 
 |  | 
 | /* Base class for playstation devices. */ | 
 | struct ps_device { | 
 | 	struct list_head list; | 
 | 	struct hid_device *hdev; | 
 | 	spinlock_t lock; | 
 |  | 
 | 	uint32_t player_id; | 
 |  | 
 | 	struct power_supply_desc battery_desc; | 
 | 	struct power_supply *battery; | 
 | 	uint8_t battery_capacity; | 
 | 	int battery_status; | 
 |  | 
 | 	const char *input_dev_name; /* Name of primary input device. */ | 
 | 	uint8_t mac_address[6]; /* Note: stored in little endian order. */ | 
 | 	uint32_t hw_version; | 
 | 	uint32_t fw_version; | 
 |  | 
 | 	int (*parse_report)(struct ps_device *dev, struct hid_report *report, u8 *data, int size); | 
 | 	void (*remove)(struct ps_device *dev); | 
 | }; | 
 |  | 
 | /* Calibration data for playstation motion sensors. */ | 
 | struct ps_calibration_data { | 
 | 	int abs_code; | 
 | 	short bias; | 
 | 	int sens_numer; | 
 | 	int sens_denom; | 
 | }; | 
 |  | 
 | struct ps_led_info { | 
 | 	const char *name; | 
 | 	const char *color; | 
 | 	int max_brightness; | 
 | 	enum led_brightness (*brightness_get)(struct led_classdev *cdev); | 
 | 	int (*brightness_set)(struct led_classdev *cdev, enum led_brightness); | 
 | 	int (*blink_set)(struct led_classdev *led, unsigned long *on, unsigned long *off); | 
 | }; | 
 |  | 
 | /* Seed values for DualShock4 / DualSense CRC32 for different report types. */ | 
 | #define PS_INPUT_CRC32_SEED	0xA1 | 
 | #define PS_OUTPUT_CRC32_SEED	0xA2 | 
 | #define PS_FEATURE_CRC32_SEED	0xA3 | 
 |  | 
 | #define DS_INPUT_REPORT_USB			0x01 | 
 | #define DS_INPUT_REPORT_USB_SIZE		64 | 
 | #define DS_INPUT_REPORT_BT			0x31 | 
 | #define DS_INPUT_REPORT_BT_SIZE			78 | 
 | #define DS_OUTPUT_REPORT_USB			0x02 | 
 | #define DS_OUTPUT_REPORT_USB_SIZE		63 | 
 | #define DS_OUTPUT_REPORT_BT			0x31 | 
 | #define DS_OUTPUT_REPORT_BT_SIZE		78 | 
 |  | 
 | #define DS_FEATURE_REPORT_CALIBRATION		0x05 | 
 | #define DS_FEATURE_REPORT_CALIBRATION_SIZE	41 | 
 | #define DS_FEATURE_REPORT_PAIRING_INFO		0x09 | 
 | #define DS_FEATURE_REPORT_PAIRING_INFO_SIZE	20 | 
 | #define DS_FEATURE_REPORT_FIRMWARE_INFO		0x20 | 
 | #define DS_FEATURE_REPORT_FIRMWARE_INFO_SIZE	64 | 
 |  | 
 | /* Button masks for DualSense input report. */ | 
 | #define DS_BUTTONS0_HAT_SWITCH	GENMASK(3, 0) | 
 | #define DS_BUTTONS0_SQUARE	BIT(4) | 
 | #define DS_BUTTONS0_CROSS	BIT(5) | 
 | #define DS_BUTTONS0_CIRCLE	BIT(6) | 
 | #define DS_BUTTONS0_TRIANGLE	BIT(7) | 
 | #define DS_BUTTONS1_L1		BIT(0) | 
 | #define DS_BUTTONS1_R1		BIT(1) | 
 | #define DS_BUTTONS1_L2		BIT(2) | 
 | #define DS_BUTTONS1_R2		BIT(3) | 
 | #define DS_BUTTONS1_CREATE	BIT(4) | 
 | #define DS_BUTTONS1_OPTIONS	BIT(5) | 
 | #define DS_BUTTONS1_L3		BIT(6) | 
 | #define DS_BUTTONS1_R3		BIT(7) | 
 | #define DS_BUTTONS2_PS_HOME	BIT(0) | 
 | #define DS_BUTTONS2_TOUCHPAD	BIT(1) | 
 | #define DS_BUTTONS2_MIC_MUTE	BIT(2) | 
 |  | 
 | /* Status field of DualSense input report. */ | 
 | #define DS_STATUS_BATTERY_CAPACITY	GENMASK(3, 0) | 
 | #define DS_STATUS_CHARGING		GENMASK(7, 4) | 
 | #define DS_STATUS_CHARGING_SHIFT	4 | 
 |  | 
 | /* Feature version from DualSense Firmware Info report. */ | 
 | #define DS_FEATURE_VERSION(major, minor) ((major & 0xff) << 8 | (minor & 0xff)) | 
 |  | 
 | /* | 
 |  * Status of a DualSense touch point contact. | 
 |  * Contact IDs, with highest bit set are 'inactive' | 
 |  * and any associated data is then invalid. | 
 |  */ | 
 | #define DS_TOUCH_POINT_INACTIVE BIT(7) | 
 |  | 
 |  /* Magic value required in tag field of Bluetooth output report. */ | 
 | #define DS_OUTPUT_TAG 0x10 | 
 | /* Flags for DualSense output report. */ | 
 | #define DS_OUTPUT_VALID_FLAG0_COMPATIBLE_VIBRATION BIT(0) | 
 | #define DS_OUTPUT_VALID_FLAG0_HAPTICS_SELECT BIT(1) | 
 | #define DS_OUTPUT_VALID_FLAG1_MIC_MUTE_LED_CONTROL_ENABLE BIT(0) | 
 | #define DS_OUTPUT_VALID_FLAG1_POWER_SAVE_CONTROL_ENABLE BIT(1) | 
 | #define DS_OUTPUT_VALID_FLAG1_LIGHTBAR_CONTROL_ENABLE BIT(2) | 
 | #define DS_OUTPUT_VALID_FLAG1_RELEASE_LEDS BIT(3) | 
 | #define DS_OUTPUT_VALID_FLAG1_PLAYER_INDICATOR_CONTROL_ENABLE BIT(4) | 
 | #define DS_OUTPUT_VALID_FLAG2_LIGHTBAR_SETUP_CONTROL_ENABLE BIT(1) | 
 | #define DS_OUTPUT_VALID_FLAG2_COMPATIBLE_VIBRATION2 BIT(2) | 
 | #define DS_OUTPUT_POWER_SAVE_CONTROL_MIC_MUTE BIT(4) | 
 | #define DS_OUTPUT_LIGHTBAR_SETUP_LIGHT_OUT BIT(1) | 
 |  | 
 | /* DualSense hardware limits */ | 
 | #define DS_ACC_RES_PER_G	8192 | 
 | #define DS_ACC_RANGE		(4*DS_ACC_RES_PER_G) | 
 | #define DS_GYRO_RES_PER_DEG_S	1024 | 
 | #define DS_GYRO_RANGE		(2048*DS_GYRO_RES_PER_DEG_S) | 
 | #define DS_TOUCHPAD_WIDTH	1920 | 
 | #define DS_TOUCHPAD_HEIGHT	1080 | 
 |  | 
 | struct dualsense { | 
 | 	struct ps_device base; | 
 | 	struct input_dev *gamepad; | 
 | 	struct input_dev *sensors; | 
 | 	struct input_dev *touchpad; | 
 |  | 
 | 	/* Update version is used as a feature/capability version. */ | 
 | 	uint16_t update_version; | 
 |  | 
 | 	/* Calibration data for accelerometer and gyroscope. */ | 
 | 	struct ps_calibration_data accel_calib_data[3]; | 
 | 	struct ps_calibration_data gyro_calib_data[3]; | 
 |  | 
 | 	/* Timestamp for sensor data */ | 
 | 	bool sensor_timestamp_initialized; | 
 | 	uint32_t prev_sensor_timestamp; | 
 | 	uint32_t sensor_timestamp_us; | 
 |  | 
 | 	/* Compatible rumble state */ | 
 | 	bool use_vibration_v2; | 
 | 	bool update_rumble; | 
 | 	uint8_t motor_left; | 
 | 	uint8_t motor_right; | 
 |  | 
 | 	/* RGB lightbar */ | 
 | 	struct led_classdev_mc lightbar; | 
 | 	bool update_lightbar; | 
 | 	uint8_t lightbar_red; | 
 | 	uint8_t lightbar_green; | 
 | 	uint8_t lightbar_blue; | 
 |  | 
 | 	/* Microphone */ | 
 | 	bool update_mic_mute; | 
 | 	bool mic_muted; | 
 | 	bool last_btn_mic_state; | 
 |  | 
 | 	/* Player leds */ | 
 | 	bool update_player_leds; | 
 | 	uint8_t player_leds_state; | 
 | 	struct led_classdev player_leds[5]; | 
 |  | 
 | 	struct work_struct output_worker; | 
 | 	bool output_worker_initialized; | 
 | 	void *output_report_dmabuf; | 
 | 	uint8_t output_seq; /* Sequence number for output report. */ | 
 | }; | 
 |  | 
 | struct dualsense_touch_point { | 
 | 	uint8_t contact; | 
 | 	uint8_t x_lo; | 
 | 	uint8_t x_hi:4, y_lo:4; | 
 | 	uint8_t y_hi; | 
 | } __packed; | 
 | static_assert(sizeof(struct dualsense_touch_point) == 4); | 
 |  | 
 | /* Main DualSense input report excluding any BT/USB specific headers. */ | 
 | struct dualsense_input_report { | 
 | 	uint8_t x, y; | 
 | 	uint8_t rx, ry; | 
 | 	uint8_t z, rz; | 
 | 	uint8_t seq_number; | 
 | 	uint8_t buttons[4]; | 
 | 	uint8_t reserved[4]; | 
 |  | 
 | 	/* Motion sensors */ | 
 | 	__le16 gyro[3]; /* x, y, z */ | 
 | 	__le16 accel[3]; /* x, y, z */ | 
 | 	__le32 sensor_timestamp; | 
 | 	uint8_t reserved2; | 
 |  | 
 | 	/* Touchpad */ | 
 | 	struct dualsense_touch_point points[2]; | 
 |  | 
 | 	uint8_t reserved3[12]; | 
 | 	uint8_t status; | 
 | 	uint8_t reserved4[10]; | 
 | } __packed; | 
 | /* Common input report size shared equals the size of the USB report minus 1 byte for ReportID. */ | 
 | static_assert(sizeof(struct dualsense_input_report) == DS_INPUT_REPORT_USB_SIZE - 1); | 
 |  | 
 | /* Common data between DualSense BT/USB main output report. */ | 
 | struct dualsense_output_report_common { | 
 | 	uint8_t valid_flag0; | 
 | 	uint8_t valid_flag1; | 
 |  | 
 | 	/* For DualShock 4 compatibility mode. */ | 
 | 	uint8_t motor_right; | 
 | 	uint8_t motor_left; | 
 |  | 
 | 	/* Audio controls */ | 
 | 	uint8_t reserved[4]; | 
 | 	uint8_t mute_button_led; | 
 |  | 
 | 	uint8_t power_save_control; | 
 | 	uint8_t reserved2[28]; | 
 |  | 
 | 	/* LEDs and lightbar */ | 
 | 	uint8_t valid_flag2; | 
 | 	uint8_t reserved3[2]; | 
 | 	uint8_t lightbar_setup; | 
 | 	uint8_t led_brightness; | 
 | 	uint8_t player_leds; | 
 | 	uint8_t lightbar_red; | 
 | 	uint8_t lightbar_green; | 
 | 	uint8_t lightbar_blue; | 
 | } __packed; | 
 | static_assert(sizeof(struct dualsense_output_report_common) == 47); | 
 |  | 
 | struct dualsense_output_report_bt { | 
 | 	uint8_t report_id; /* 0x31 */ | 
 | 	uint8_t seq_tag; | 
 | 	uint8_t tag; | 
 | 	struct dualsense_output_report_common common; | 
 | 	uint8_t reserved[24]; | 
 | 	__le32 crc32; | 
 | } __packed; | 
 | static_assert(sizeof(struct dualsense_output_report_bt) == DS_OUTPUT_REPORT_BT_SIZE); | 
 |  | 
 | struct dualsense_output_report_usb { | 
 | 	uint8_t report_id; /* 0x02 */ | 
 | 	struct dualsense_output_report_common common; | 
 | 	uint8_t reserved[15]; | 
 | } __packed; | 
 | static_assert(sizeof(struct dualsense_output_report_usb) == DS_OUTPUT_REPORT_USB_SIZE); | 
 |  | 
 | /* | 
 |  * The DualSense has a main output report used to control most features. It is | 
 |  * largely the same between Bluetooth and USB except for different headers and CRC. | 
 |  * This structure hide the differences between the two to simplify sending output reports. | 
 |  */ | 
 | struct dualsense_output_report { | 
 | 	uint8_t *data; /* Start of data */ | 
 | 	uint8_t len; /* Size of output report */ | 
 |  | 
 | 	/* Points to Bluetooth data payload in case for a Bluetooth report else NULL. */ | 
 | 	struct dualsense_output_report_bt *bt; | 
 | 	/* Points to USB data payload in case for a USB report else NULL. */ | 
 | 	struct dualsense_output_report_usb *usb; | 
 | 	/* Points to common section of report, so past any headers. */ | 
 | 	struct dualsense_output_report_common *common; | 
 | }; | 
 |  | 
 | #define DS4_INPUT_REPORT_USB			0x01 | 
 | #define DS4_INPUT_REPORT_USB_SIZE		64 | 
 | #define DS4_INPUT_REPORT_BT_MINIMAL		0x01 | 
 | #define DS4_INPUT_REPORT_BT_MINIMAL_SIZE	10 | 
 | #define DS4_INPUT_REPORT_BT			0x11 | 
 | #define DS4_INPUT_REPORT_BT_SIZE		78 | 
 | #define DS4_OUTPUT_REPORT_USB			0x05 | 
 | #define DS4_OUTPUT_REPORT_USB_SIZE		32 | 
 | #define DS4_OUTPUT_REPORT_BT			0x11 | 
 | #define DS4_OUTPUT_REPORT_BT_SIZE		78 | 
 |  | 
 | #define DS4_FEATURE_REPORT_CALIBRATION		0x02 | 
 | #define DS4_FEATURE_REPORT_CALIBRATION_SIZE	37 | 
 | #define DS4_FEATURE_REPORT_CALIBRATION_BT	0x05 | 
 | #define DS4_FEATURE_REPORT_CALIBRATION_BT_SIZE	41 | 
 | #define DS4_FEATURE_REPORT_FIRMWARE_INFO	0xa3 | 
 | #define DS4_FEATURE_REPORT_FIRMWARE_INFO_SIZE	49 | 
 | #define DS4_FEATURE_REPORT_PAIRING_INFO		0x12 | 
 | #define DS4_FEATURE_REPORT_PAIRING_INFO_SIZE	16 | 
 |  | 
 | /* | 
 |  * Status of a DualShock4 touch point contact. | 
 |  * Contact IDs, with highest bit set are 'inactive' | 
 |  * and any associated data is then invalid. | 
 |  */ | 
 | #define DS4_TOUCH_POINT_INACTIVE BIT(7) | 
 |  | 
 | /* Status field of DualShock4 input report. */ | 
 | #define DS4_STATUS0_BATTERY_CAPACITY	GENMASK(3, 0) | 
 | #define DS4_STATUS0_CABLE_STATE		BIT(4) | 
 | /* Battery status within batery_status field. */ | 
 | #define DS4_BATTERY_STATUS_FULL		11 | 
 | /* Status1 bit2 contains dongle connection state: | 
 |  * 0 = connectd | 
 |  * 1 = disconnected | 
 |  */ | 
 | #define DS4_STATUS1_DONGLE_STATE	BIT(2) | 
 |  | 
 | /* The lower 6 bits of hw_control of the Bluetooth main output report | 
 |  * control the interval at which Dualshock 4 reports data: | 
 |  * 0x00 - 1ms | 
 |  * 0x01 - 1ms | 
 |  * 0x02 - 2ms | 
 |  * 0x3E - 62ms | 
 |  * 0x3F - disabled | 
 |  */ | 
 | #define DS4_OUTPUT_HWCTL_BT_POLL_MASK	0x3F | 
 | /* Default to 4ms poll interval, which is same as USB (not adjustable). */ | 
 | #define DS4_BT_DEFAULT_POLL_INTERVAL_MS	4 | 
 | #define DS4_OUTPUT_HWCTL_CRC32		0x40 | 
 | #define DS4_OUTPUT_HWCTL_HID		0x80 | 
 |  | 
 | /* Flags for DualShock4 output report. */ | 
 | #define DS4_OUTPUT_VALID_FLAG0_MOTOR		0x01 | 
 | #define DS4_OUTPUT_VALID_FLAG0_LED		0x02 | 
 | #define DS4_OUTPUT_VALID_FLAG0_LED_BLINK	0x04 | 
 |  | 
 | /* DualShock4 hardware limits */ | 
 | #define DS4_ACC_RES_PER_G	8192 | 
 | #define DS4_ACC_RANGE		(4*DS_ACC_RES_PER_G) | 
 | #define DS4_GYRO_RES_PER_DEG_S	1024 | 
 | #define DS4_GYRO_RANGE		(2048*DS_GYRO_RES_PER_DEG_S) | 
 | #define DS4_LIGHTBAR_MAX_BLINK	255 /* 255 centiseconds */ | 
 | #define DS4_TOUCHPAD_WIDTH	1920 | 
 | #define DS4_TOUCHPAD_HEIGHT	942 | 
 |  | 
 | enum dualshock4_dongle_state { | 
 | 	DONGLE_DISCONNECTED, | 
 | 	DONGLE_CALIBRATING, | 
 | 	DONGLE_CONNECTED, | 
 | 	DONGLE_DISABLED | 
 | }; | 
 |  | 
 | struct dualshock4 { | 
 | 	struct ps_device base; | 
 | 	struct input_dev *gamepad; | 
 | 	struct input_dev *sensors; | 
 | 	struct input_dev *touchpad; | 
 |  | 
 | 	/* Calibration data for accelerometer and gyroscope. */ | 
 | 	struct ps_calibration_data accel_calib_data[3]; | 
 | 	struct ps_calibration_data gyro_calib_data[3]; | 
 |  | 
 | 	/* Only used on dongle to track state transitions. */ | 
 | 	enum dualshock4_dongle_state dongle_state; | 
 | 	/* Used during calibration. */ | 
 | 	struct work_struct dongle_hotplug_worker; | 
 |  | 
 | 	/* Timestamp for sensor data */ | 
 | 	bool sensor_timestamp_initialized; | 
 | 	uint32_t prev_sensor_timestamp; | 
 | 	uint32_t sensor_timestamp_us; | 
 |  | 
 | 	/* Bluetooth poll interval */ | 
 | 	bool update_bt_poll_interval; | 
 | 	uint8_t bt_poll_interval; | 
 |  | 
 | 	bool update_rumble; | 
 | 	uint8_t motor_left; | 
 | 	uint8_t motor_right; | 
 |  | 
 | 	/* Lightbar leds */ | 
 | 	bool update_lightbar; | 
 | 	bool update_lightbar_blink; | 
 | 	bool lightbar_enabled; /* For use by global LED control. */ | 
 | 	uint8_t lightbar_red; | 
 | 	uint8_t lightbar_green; | 
 | 	uint8_t lightbar_blue; | 
 | 	uint8_t lightbar_blink_on; /* In increments of 10ms. */ | 
 | 	uint8_t lightbar_blink_off; /* In increments of 10ms. */ | 
 | 	struct led_classdev lightbar_leds[4]; | 
 |  | 
 | 	struct work_struct output_worker; | 
 | 	bool output_worker_initialized; | 
 | 	void *output_report_dmabuf; | 
 | }; | 
 |  | 
 | struct dualshock4_touch_point { | 
 | 	uint8_t contact; | 
 | 	uint8_t x_lo; | 
 | 	uint8_t x_hi:4, y_lo:4; | 
 | 	uint8_t y_hi; | 
 | } __packed; | 
 | static_assert(sizeof(struct dualshock4_touch_point) == 4); | 
 |  | 
 | struct dualshock4_touch_report { | 
 | 	uint8_t timestamp; | 
 | 	struct dualshock4_touch_point points[2]; | 
 | } __packed; | 
 | static_assert(sizeof(struct dualshock4_touch_report) == 9); | 
 |  | 
 | /* Main DualShock4 input report excluding any BT/USB specific headers. */ | 
 | struct dualshock4_input_report_common { | 
 | 	uint8_t x, y; | 
 | 	uint8_t rx, ry; | 
 | 	uint8_t buttons[3]; | 
 | 	uint8_t z, rz; | 
 |  | 
 | 	/* Motion sensors */ | 
 | 	__le16 sensor_timestamp; | 
 | 	uint8_t sensor_temperature; | 
 | 	__le16 gyro[3]; /* x, y, z */ | 
 | 	__le16 accel[3]; /* x, y, z */ | 
 | 	uint8_t reserved2[5]; | 
 |  | 
 | 	uint8_t status[2]; | 
 | 	uint8_t reserved3; | 
 | } __packed; | 
 | static_assert(sizeof(struct dualshock4_input_report_common) == 32); | 
 |  | 
 | struct dualshock4_input_report_usb { | 
 | 	uint8_t report_id; /* 0x01 */ | 
 | 	struct dualshock4_input_report_common common; | 
 | 	uint8_t num_touch_reports; | 
 | 	struct dualshock4_touch_report touch_reports[3]; | 
 | 	uint8_t reserved[3]; | 
 | } __packed; | 
 | static_assert(sizeof(struct dualshock4_input_report_usb) == DS4_INPUT_REPORT_USB_SIZE); | 
 |  | 
 | struct dualshock4_input_report_bt { | 
 | 	uint8_t report_id; /* 0x11 */ | 
 | 	uint8_t reserved[2]; | 
 | 	struct dualshock4_input_report_common common; | 
 | 	uint8_t num_touch_reports; | 
 | 	struct dualshock4_touch_report touch_reports[4]; /* BT has 4 compared to 3 for USB */ | 
 | 	uint8_t reserved2[2]; | 
 | 	__le32 crc32; | 
 | } __packed; | 
 | static_assert(sizeof(struct dualshock4_input_report_bt) == DS4_INPUT_REPORT_BT_SIZE); | 
 |  | 
 | /* Common data between Bluetooth and USB DualShock4 output reports. */ | 
 | struct dualshock4_output_report_common { | 
 | 	uint8_t valid_flag0; | 
 | 	uint8_t valid_flag1; | 
 |  | 
 | 	uint8_t reserved; | 
 |  | 
 | 	uint8_t motor_right; | 
 | 	uint8_t motor_left; | 
 |  | 
 | 	uint8_t lightbar_red; | 
 | 	uint8_t lightbar_green; | 
 | 	uint8_t lightbar_blue; | 
 | 	uint8_t lightbar_blink_on; | 
 | 	uint8_t lightbar_blink_off; | 
 | } __packed; | 
 |  | 
 | struct dualshock4_output_report_usb { | 
 | 	uint8_t report_id; /* 0x5 */ | 
 | 	struct dualshock4_output_report_common common; | 
 | 	uint8_t reserved[21]; | 
 | } __packed; | 
 | static_assert(sizeof(struct dualshock4_output_report_usb) == DS4_OUTPUT_REPORT_USB_SIZE); | 
 |  | 
 | struct dualshock4_output_report_bt { | 
 | 	uint8_t report_id; /* 0x11 */ | 
 | 	uint8_t hw_control; | 
 | 	uint8_t audio_control; | 
 | 	struct dualshock4_output_report_common common; | 
 | 	uint8_t reserved[61]; | 
 | 	__le32 crc32; | 
 | } __packed; | 
 | static_assert(sizeof(struct dualshock4_output_report_bt) == DS4_OUTPUT_REPORT_BT_SIZE); | 
 |  | 
 | /* | 
 |  * The DualShock4 has a main output report used to control most features. It is | 
 |  * largely the same between Bluetooth and USB except for different headers and CRC. | 
 |  * This structure hide the differences between the two to simplify sending output reports. | 
 |  */ | 
 | struct dualshock4_output_report { | 
 | 	uint8_t *data; /* Start of data */ | 
 | 	uint8_t len; /* Size of output report */ | 
 |  | 
 | 	/* Points to Bluetooth data payload in case for a Bluetooth report else NULL. */ | 
 | 	struct dualshock4_output_report_bt *bt; | 
 | 	/* Points to USB data payload in case for a USB report else NULL. */ | 
 | 	struct dualshock4_output_report_usb *usb; | 
 | 	/* Points to common section of report, so past any headers. */ | 
 | 	struct dualshock4_output_report_common *common; | 
 | }; | 
 |  | 
 | /* | 
 |  * Common gamepad buttons across DualShock 3 / 4 and DualSense. | 
 |  * Note: for device with a touchpad, touchpad button is not included | 
 |  *        as it will be part of the touchpad device. | 
 |  */ | 
 | static const int ps_gamepad_buttons[] = { | 
 | 	BTN_WEST, /* Square */ | 
 | 	BTN_NORTH, /* Triangle */ | 
 | 	BTN_EAST, /* Circle */ | 
 | 	BTN_SOUTH, /* Cross */ | 
 | 	BTN_TL, /* L1 */ | 
 | 	BTN_TR, /* R1 */ | 
 | 	BTN_TL2, /* L2 */ | 
 | 	BTN_TR2, /* R2 */ | 
 | 	BTN_SELECT, /* Create (PS5) / Share (PS4) */ | 
 | 	BTN_START, /* Option */ | 
 | 	BTN_THUMBL, /* L3 */ | 
 | 	BTN_THUMBR, /* R3 */ | 
 | 	BTN_MODE, /* PS Home */ | 
 | }; | 
 |  | 
 | static const struct {int x; int y; } ps_gamepad_hat_mapping[] = { | 
 | 	{0, -1}, {1, -1}, {1, 0}, {1, 1}, {0, 1}, {-1, 1}, {-1, 0}, {-1, -1}, | 
 | 	{0, 0}, | 
 | }; | 
 |  | 
 | static int dualshock4_get_calibration_data(struct dualshock4 *ds4); | 
 | static inline void dualsense_schedule_work(struct dualsense *ds); | 
 | static inline void dualshock4_schedule_work(struct dualshock4 *ds4); | 
 | static void dualsense_set_lightbar(struct dualsense *ds, uint8_t red, uint8_t green, uint8_t blue); | 
 | static void dualshock4_set_default_lightbar_colors(struct dualshock4 *ds4); | 
 |  | 
 | /* | 
 |  * Add a new ps_device to ps_devices if it doesn't exist. | 
 |  * Return error on duplicate device, which can happen if the same | 
 |  * device is connected using both Bluetooth and USB. | 
 |  */ | 
 | static int ps_devices_list_add(struct ps_device *dev) | 
 | { | 
 | 	struct ps_device *entry; | 
 |  | 
 | 	mutex_lock(&ps_devices_lock); | 
 | 	list_for_each_entry(entry, &ps_devices_list, list) { | 
 | 		if (!memcmp(entry->mac_address, dev->mac_address, sizeof(dev->mac_address))) { | 
 | 			hid_err(dev->hdev, "Duplicate device found for MAC address %pMR.\n", | 
 | 					dev->mac_address); | 
 | 			mutex_unlock(&ps_devices_lock); | 
 | 			return -EEXIST; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	list_add_tail(&dev->list, &ps_devices_list); | 
 | 	mutex_unlock(&ps_devices_lock); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ps_devices_list_remove(struct ps_device *dev) | 
 | { | 
 | 	mutex_lock(&ps_devices_lock); | 
 | 	list_del(&dev->list); | 
 | 	mutex_unlock(&ps_devices_lock); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ps_device_set_player_id(struct ps_device *dev) | 
 | { | 
 | 	int ret = ida_alloc(&ps_player_id_allocator, GFP_KERNEL); | 
 |  | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	dev->player_id = ret; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void ps_device_release_player_id(struct ps_device *dev) | 
 | { | 
 | 	ida_free(&ps_player_id_allocator, dev->player_id); | 
 |  | 
 | 	dev->player_id = U32_MAX; | 
 | } | 
 |  | 
 | static struct input_dev *ps_allocate_input_dev(struct hid_device *hdev, const char *name_suffix) | 
 | { | 
 | 	struct input_dev *input_dev; | 
 |  | 
 | 	input_dev = devm_input_allocate_device(&hdev->dev); | 
 | 	if (!input_dev) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	input_dev->id.bustype = hdev->bus; | 
 | 	input_dev->id.vendor = hdev->vendor; | 
 | 	input_dev->id.product = hdev->product; | 
 | 	input_dev->id.version = hdev->version; | 
 | 	input_dev->uniq = hdev->uniq; | 
 |  | 
 | 	if (name_suffix) { | 
 | 		input_dev->name = devm_kasprintf(&hdev->dev, GFP_KERNEL, "%s %s", hdev->name, | 
 | 				name_suffix); | 
 | 		if (!input_dev->name) | 
 | 			return ERR_PTR(-ENOMEM); | 
 | 	} else { | 
 | 		input_dev->name = hdev->name; | 
 | 	} | 
 |  | 
 | 	input_set_drvdata(input_dev, hdev); | 
 |  | 
 | 	return input_dev; | 
 | } | 
 |  | 
 | static enum power_supply_property ps_power_supply_props[] = { | 
 | 	POWER_SUPPLY_PROP_STATUS, | 
 | 	POWER_SUPPLY_PROP_PRESENT, | 
 | 	POWER_SUPPLY_PROP_CAPACITY, | 
 | 	POWER_SUPPLY_PROP_SCOPE, | 
 | }; | 
 |  | 
 | static int ps_battery_get_property(struct power_supply *psy, | 
 | 		enum power_supply_property psp, | 
 | 		union power_supply_propval *val) | 
 | { | 
 | 	struct ps_device *dev = power_supply_get_drvdata(psy); | 
 | 	uint8_t battery_capacity; | 
 | 	int battery_status; | 
 | 	unsigned long flags; | 
 | 	int ret = 0; | 
 |  | 
 | 	spin_lock_irqsave(&dev->lock, flags); | 
 | 	battery_capacity = dev->battery_capacity; | 
 | 	battery_status = dev->battery_status; | 
 | 	spin_unlock_irqrestore(&dev->lock, flags); | 
 |  | 
 | 	switch (psp) { | 
 | 	case POWER_SUPPLY_PROP_STATUS: | 
 | 		val->intval = battery_status; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_PRESENT: | 
 | 		val->intval = 1; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CAPACITY: | 
 | 		val->intval = battery_capacity; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_SCOPE: | 
 | 		val->intval = POWER_SUPPLY_SCOPE_DEVICE; | 
 | 		break; | 
 | 	default: | 
 | 		ret = -EINVAL; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ps_device_register_battery(struct ps_device *dev) | 
 | { | 
 | 	struct power_supply *battery; | 
 | 	struct power_supply_config battery_cfg = { .drv_data = dev }; | 
 | 	int ret; | 
 |  | 
 | 	dev->battery_desc.type = POWER_SUPPLY_TYPE_BATTERY; | 
 | 	dev->battery_desc.properties = ps_power_supply_props; | 
 | 	dev->battery_desc.num_properties = ARRAY_SIZE(ps_power_supply_props); | 
 | 	dev->battery_desc.get_property = ps_battery_get_property; | 
 | 	dev->battery_desc.name = devm_kasprintf(&dev->hdev->dev, GFP_KERNEL, | 
 | 			"ps-controller-battery-%pMR", dev->mac_address); | 
 | 	if (!dev->battery_desc.name) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	battery = devm_power_supply_register(&dev->hdev->dev, &dev->battery_desc, &battery_cfg); | 
 | 	if (IS_ERR(battery)) { | 
 | 		ret = PTR_ERR(battery); | 
 | 		hid_err(dev->hdev, "Unable to register battery device: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 | 	dev->battery = battery; | 
 |  | 
 | 	ret = power_supply_powers(dev->battery, &dev->hdev->dev); | 
 | 	if (ret) { | 
 | 		hid_err(dev->hdev, "Unable to activate battery device: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Compute crc32 of HID data and compare against expected CRC. */ | 
 | static bool ps_check_crc32(uint8_t seed, uint8_t *data, size_t len, uint32_t report_crc) | 
 | { | 
 | 	uint32_t crc; | 
 |  | 
 | 	crc = crc32_le(0xFFFFFFFF, &seed, 1); | 
 | 	crc = ~crc32_le(crc, data, len); | 
 |  | 
 | 	return crc == report_crc; | 
 | } | 
 |  | 
 | static struct input_dev *ps_gamepad_create(struct hid_device *hdev, | 
 | 		int (*play_effect)(struct input_dev *, void *, struct ff_effect *)) | 
 | { | 
 | 	struct input_dev *gamepad; | 
 | 	unsigned int i; | 
 | 	int ret; | 
 |  | 
 | 	gamepad = ps_allocate_input_dev(hdev, NULL); | 
 | 	if (IS_ERR(gamepad)) | 
 | 		return ERR_CAST(gamepad); | 
 |  | 
 | 	input_set_abs_params(gamepad, ABS_X, 0, 255, 0, 0); | 
 | 	input_set_abs_params(gamepad, ABS_Y, 0, 255, 0, 0); | 
 | 	input_set_abs_params(gamepad, ABS_Z, 0, 255, 0, 0); | 
 | 	input_set_abs_params(gamepad, ABS_RX, 0, 255, 0, 0); | 
 | 	input_set_abs_params(gamepad, ABS_RY, 0, 255, 0, 0); | 
 | 	input_set_abs_params(gamepad, ABS_RZ, 0, 255, 0, 0); | 
 |  | 
 | 	input_set_abs_params(gamepad, ABS_HAT0X, -1, 1, 0, 0); | 
 | 	input_set_abs_params(gamepad, ABS_HAT0Y, -1, 1, 0, 0); | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(ps_gamepad_buttons); i++) | 
 | 		input_set_capability(gamepad, EV_KEY, ps_gamepad_buttons[i]); | 
 |  | 
 | #if IS_ENABLED(CONFIG_PLAYSTATION_FF) | 
 | 	if (play_effect) { | 
 | 		input_set_capability(gamepad, EV_FF, FF_RUMBLE); | 
 | 		input_ff_create_memless(gamepad, NULL, play_effect); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	ret = input_register_device(gamepad); | 
 | 	if (ret) | 
 | 		return ERR_PTR(ret); | 
 |  | 
 | 	return gamepad; | 
 | } | 
 |  | 
 | static int ps_get_report(struct hid_device *hdev, uint8_t report_id, uint8_t *buf, size_t size, | 
 | 		bool check_crc) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = hid_hw_raw_request(hdev, report_id, buf, size, HID_FEATURE_REPORT, | 
 | 				 HID_REQ_GET_REPORT); | 
 | 	if (ret < 0) { | 
 | 		hid_err(hdev, "Failed to retrieve feature with reportID %d: %d\n", report_id, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	if (ret != size) { | 
 | 		hid_err(hdev, "Invalid byte count transferred, expected %zu got %d\n", size, ret); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (buf[0] != report_id) { | 
 | 		hid_err(hdev, "Invalid reportID received, expected %d got %d\n", report_id, buf[0]); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (hdev->bus == BUS_BLUETOOTH && check_crc) { | 
 | 		/* Last 4 bytes contains crc32. */ | 
 | 		uint8_t crc_offset = size - 4; | 
 | 		uint32_t report_crc = get_unaligned_le32(&buf[crc_offset]); | 
 |  | 
 | 		if (!ps_check_crc32(PS_FEATURE_CRC32_SEED, buf, crc_offset, report_crc)) { | 
 | 			hid_err(hdev, "CRC check failed for reportID=%d\n", report_id); | 
 | 			return -EILSEQ; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ps_led_register(struct ps_device *ps_dev, struct led_classdev *led, | 
 | 		const struct ps_led_info *led_info) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (led_info->name) { | 
 | 		led->name = devm_kasprintf(&ps_dev->hdev->dev, GFP_KERNEL, | 
 | 				"%s:%s:%s", ps_dev->input_dev_name, led_info->color, led_info->name); | 
 | 	} else { | 
 | 		/* Backwards compatible mode for hid-sony, but not compliant with LED class spec. */ | 
 | 		led->name = devm_kasprintf(&ps_dev->hdev->dev, GFP_KERNEL, | 
 | 				"%s:%s", ps_dev->input_dev_name, led_info->color); | 
 | 	} | 
 |  | 
 | 	if (!led->name) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	led->brightness = 0; | 
 | 	led->max_brightness = led_info->max_brightness; | 
 | 	led->flags = LED_CORE_SUSPENDRESUME; | 
 | 	led->brightness_get = led_info->brightness_get; | 
 | 	led->brightness_set_blocking = led_info->brightness_set; | 
 | 	led->blink_set = led_info->blink_set; | 
 |  | 
 | 	ret = devm_led_classdev_register(&ps_dev->hdev->dev, led); | 
 | 	if (ret) { | 
 | 		hid_err(ps_dev->hdev, "Failed to register LED %s: %d\n", led_info->name, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Register a DualSense/DualShock4 RGB lightbar represented by a multicolor LED. */ | 
 | static int ps_lightbar_register(struct ps_device *ps_dev, struct led_classdev_mc *lightbar_mc_dev, | 
 | 	int (*brightness_set)(struct led_classdev *, enum led_brightness)) | 
 | { | 
 | 	struct hid_device *hdev = ps_dev->hdev; | 
 | 	struct mc_subled *mc_led_info; | 
 | 	struct led_classdev *led_cdev; | 
 | 	int ret; | 
 |  | 
 | 	mc_led_info = devm_kmalloc_array(&hdev->dev, 3, sizeof(*mc_led_info), | 
 | 					 GFP_KERNEL | __GFP_ZERO); | 
 | 	if (!mc_led_info) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	mc_led_info[0].color_index = LED_COLOR_ID_RED; | 
 | 	mc_led_info[1].color_index = LED_COLOR_ID_GREEN; | 
 | 	mc_led_info[2].color_index = LED_COLOR_ID_BLUE; | 
 |  | 
 | 	lightbar_mc_dev->subled_info = mc_led_info; | 
 | 	lightbar_mc_dev->num_colors = 3; | 
 |  | 
 | 	led_cdev = &lightbar_mc_dev->led_cdev; | 
 | 	led_cdev->name = devm_kasprintf(&hdev->dev, GFP_KERNEL, "%s:rgb:indicator", | 
 | 			ps_dev->input_dev_name); | 
 | 	if (!led_cdev->name) | 
 | 		return -ENOMEM; | 
 | 	led_cdev->brightness = 255; | 
 | 	led_cdev->max_brightness = 255; | 
 | 	led_cdev->brightness_set_blocking = brightness_set; | 
 |  | 
 | 	ret = devm_led_classdev_multicolor_register(&hdev->dev, lightbar_mc_dev); | 
 | 	if (ret < 0) { | 
 | 		hid_err(hdev, "Cannot register multicolor LED device\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct input_dev *ps_sensors_create(struct hid_device *hdev, int accel_range, int accel_res, | 
 | 		int gyro_range, int gyro_res) | 
 | { | 
 | 	struct input_dev *sensors; | 
 | 	int ret; | 
 |  | 
 | 	sensors = ps_allocate_input_dev(hdev, "Motion Sensors"); | 
 | 	if (IS_ERR(sensors)) | 
 | 		return ERR_CAST(sensors); | 
 |  | 
 | 	__set_bit(INPUT_PROP_ACCELEROMETER, sensors->propbit); | 
 | 	__set_bit(EV_MSC, sensors->evbit); | 
 | 	__set_bit(MSC_TIMESTAMP, sensors->mscbit); | 
 |  | 
 | 	/* Accelerometer */ | 
 | 	input_set_abs_params(sensors, ABS_X, -accel_range, accel_range, 16, 0); | 
 | 	input_set_abs_params(sensors, ABS_Y, -accel_range, accel_range, 16, 0); | 
 | 	input_set_abs_params(sensors, ABS_Z, -accel_range, accel_range, 16, 0); | 
 | 	input_abs_set_res(sensors, ABS_X, accel_res); | 
 | 	input_abs_set_res(sensors, ABS_Y, accel_res); | 
 | 	input_abs_set_res(sensors, ABS_Z, accel_res); | 
 |  | 
 | 	/* Gyroscope */ | 
 | 	input_set_abs_params(sensors, ABS_RX, -gyro_range, gyro_range, 16, 0); | 
 | 	input_set_abs_params(sensors, ABS_RY, -gyro_range, gyro_range, 16, 0); | 
 | 	input_set_abs_params(sensors, ABS_RZ, -gyro_range, gyro_range, 16, 0); | 
 | 	input_abs_set_res(sensors, ABS_RX, gyro_res); | 
 | 	input_abs_set_res(sensors, ABS_RY, gyro_res); | 
 | 	input_abs_set_res(sensors, ABS_RZ, gyro_res); | 
 |  | 
 | 	ret = input_register_device(sensors); | 
 | 	if (ret) | 
 | 		return ERR_PTR(ret); | 
 |  | 
 | 	return sensors; | 
 | } | 
 |  | 
 | static struct input_dev *ps_touchpad_create(struct hid_device *hdev, int width, int height, | 
 | 		unsigned int num_contacts) | 
 | { | 
 | 	struct input_dev *touchpad; | 
 | 	int ret; | 
 |  | 
 | 	touchpad = ps_allocate_input_dev(hdev, "Touchpad"); | 
 | 	if (IS_ERR(touchpad)) | 
 | 		return ERR_CAST(touchpad); | 
 |  | 
 | 	/* Map button underneath touchpad to BTN_LEFT. */ | 
 | 	input_set_capability(touchpad, EV_KEY, BTN_LEFT); | 
 | 	__set_bit(INPUT_PROP_BUTTONPAD, touchpad->propbit); | 
 |  | 
 | 	input_set_abs_params(touchpad, ABS_MT_POSITION_X, 0, width - 1, 0, 0); | 
 | 	input_set_abs_params(touchpad, ABS_MT_POSITION_Y, 0, height - 1, 0, 0); | 
 |  | 
 | 	ret = input_mt_init_slots(touchpad, num_contacts, INPUT_MT_POINTER); | 
 | 	if (ret) | 
 | 		return ERR_PTR(ret); | 
 |  | 
 | 	ret = input_register_device(touchpad); | 
 | 	if (ret) | 
 | 		return ERR_PTR(ret); | 
 |  | 
 | 	return touchpad; | 
 | } | 
 |  | 
 | static ssize_t firmware_version_show(struct device *dev, | 
 | 				struct device_attribute | 
 | 				*attr, char *buf) | 
 | { | 
 | 	struct hid_device *hdev = to_hid_device(dev); | 
 | 	struct ps_device *ps_dev = hid_get_drvdata(hdev); | 
 |  | 
 | 	return sysfs_emit(buf, "0x%08x\n", ps_dev->fw_version); | 
 | } | 
 |  | 
 | static DEVICE_ATTR_RO(firmware_version); | 
 |  | 
 | static ssize_t hardware_version_show(struct device *dev, | 
 | 				struct device_attribute | 
 | 				*attr, char *buf) | 
 | { | 
 | 	struct hid_device *hdev = to_hid_device(dev); | 
 | 	struct ps_device *ps_dev = hid_get_drvdata(hdev); | 
 |  | 
 | 	return sysfs_emit(buf, "0x%08x\n", ps_dev->hw_version); | 
 | } | 
 |  | 
 | static DEVICE_ATTR_RO(hardware_version); | 
 |  | 
 | static struct attribute *ps_device_attrs[] = { | 
 | 	&dev_attr_firmware_version.attr, | 
 | 	&dev_attr_hardware_version.attr, | 
 | 	NULL | 
 | }; | 
 | ATTRIBUTE_GROUPS(ps_device); | 
 |  | 
 | static int dualsense_get_calibration_data(struct dualsense *ds) | 
 | { | 
 | 	struct hid_device *hdev = ds->base.hdev; | 
 | 	short gyro_pitch_bias, gyro_pitch_plus, gyro_pitch_minus; | 
 | 	short gyro_yaw_bias, gyro_yaw_plus, gyro_yaw_minus; | 
 | 	short gyro_roll_bias, gyro_roll_plus, gyro_roll_minus; | 
 | 	short gyro_speed_plus, gyro_speed_minus; | 
 | 	short acc_x_plus, acc_x_minus; | 
 | 	short acc_y_plus, acc_y_minus; | 
 | 	short acc_z_plus, acc_z_minus; | 
 | 	int speed_2x; | 
 | 	int range_2g; | 
 | 	int ret = 0; | 
 | 	int i; | 
 | 	uint8_t *buf; | 
 |  | 
 | 	buf = kzalloc(DS_FEATURE_REPORT_CALIBRATION_SIZE, GFP_KERNEL); | 
 | 	if (!buf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ret = ps_get_report(ds->base.hdev, DS_FEATURE_REPORT_CALIBRATION, buf, | 
 | 			DS_FEATURE_REPORT_CALIBRATION_SIZE, true); | 
 | 	if (ret) { | 
 | 		hid_err(ds->base.hdev, "Failed to retrieve DualSense calibration info: %d\n", ret); | 
 | 		goto err_free; | 
 | 	} | 
 |  | 
 | 	gyro_pitch_bias  = get_unaligned_le16(&buf[1]); | 
 | 	gyro_yaw_bias    = get_unaligned_le16(&buf[3]); | 
 | 	gyro_roll_bias   = get_unaligned_le16(&buf[5]); | 
 | 	gyro_pitch_plus  = get_unaligned_le16(&buf[7]); | 
 | 	gyro_pitch_minus = get_unaligned_le16(&buf[9]); | 
 | 	gyro_yaw_plus    = get_unaligned_le16(&buf[11]); | 
 | 	gyro_yaw_minus   = get_unaligned_le16(&buf[13]); | 
 | 	gyro_roll_plus   = get_unaligned_le16(&buf[15]); | 
 | 	gyro_roll_minus  = get_unaligned_le16(&buf[17]); | 
 | 	gyro_speed_plus  = get_unaligned_le16(&buf[19]); | 
 | 	gyro_speed_minus = get_unaligned_le16(&buf[21]); | 
 | 	acc_x_plus       = get_unaligned_le16(&buf[23]); | 
 | 	acc_x_minus      = get_unaligned_le16(&buf[25]); | 
 | 	acc_y_plus       = get_unaligned_le16(&buf[27]); | 
 | 	acc_y_minus      = get_unaligned_le16(&buf[29]); | 
 | 	acc_z_plus       = get_unaligned_le16(&buf[31]); | 
 | 	acc_z_minus      = get_unaligned_le16(&buf[33]); | 
 |  | 
 | 	/* | 
 | 	 * Set gyroscope calibration and normalization parameters. | 
 | 	 * Data values will be normalized to 1/DS_GYRO_RES_PER_DEG_S degree/s. | 
 | 	 */ | 
 | 	speed_2x = (gyro_speed_plus + gyro_speed_minus); | 
 | 	ds->gyro_calib_data[0].abs_code = ABS_RX; | 
 | 	ds->gyro_calib_data[0].bias = 0; | 
 | 	ds->gyro_calib_data[0].sens_numer = speed_2x*DS_GYRO_RES_PER_DEG_S; | 
 | 	ds->gyro_calib_data[0].sens_denom = abs(gyro_pitch_plus - gyro_pitch_bias) + | 
 | 			abs(gyro_pitch_minus - gyro_pitch_bias); | 
 |  | 
 | 	ds->gyro_calib_data[1].abs_code = ABS_RY; | 
 | 	ds->gyro_calib_data[1].bias = 0; | 
 | 	ds->gyro_calib_data[1].sens_numer = speed_2x*DS_GYRO_RES_PER_DEG_S; | 
 | 	ds->gyro_calib_data[1].sens_denom = abs(gyro_yaw_plus - gyro_yaw_bias) + | 
 | 			abs(gyro_yaw_minus - gyro_yaw_bias); | 
 |  | 
 | 	ds->gyro_calib_data[2].abs_code = ABS_RZ; | 
 | 	ds->gyro_calib_data[2].bias = 0; | 
 | 	ds->gyro_calib_data[2].sens_numer = speed_2x*DS_GYRO_RES_PER_DEG_S; | 
 | 	ds->gyro_calib_data[2].sens_denom = abs(gyro_roll_plus - gyro_roll_bias) + | 
 | 			abs(gyro_roll_minus - gyro_roll_bias); | 
 |  | 
 | 	/* | 
 | 	 * Sanity check gyro calibration data. This is needed to prevent crashes | 
 | 	 * during report handling of virtual, clone or broken devices not implementing | 
 | 	 * calibration data properly. | 
 | 	 */ | 
 | 	for (i = 0; i < ARRAY_SIZE(ds->gyro_calib_data); i++) { | 
 | 		if (ds->gyro_calib_data[i].sens_denom == 0) { | 
 | 			hid_warn(hdev, "Invalid gyro calibration data for axis (%d), disabling calibration.", | 
 | 					ds->gyro_calib_data[i].abs_code); | 
 | 			ds->gyro_calib_data[i].bias = 0; | 
 | 			ds->gyro_calib_data[i].sens_numer = DS_GYRO_RANGE; | 
 | 			ds->gyro_calib_data[i].sens_denom = S16_MAX; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Set accelerometer calibration and normalization parameters. | 
 | 	 * Data values will be normalized to 1/DS_ACC_RES_PER_G g. | 
 | 	 */ | 
 | 	range_2g = acc_x_plus - acc_x_minus; | 
 | 	ds->accel_calib_data[0].abs_code = ABS_X; | 
 | 	ds->accel_calib_data[0].bias = acc_x_plus - range_2g / 2; | 
 | 	ds->accel_calib_data[0].sens_numer = 2*DS_ACC_RES_PER_G; | 
 | 	ds->accel_calib_data[0].sens_denom = range_2g; | 
 |  | 
 | 	range_2g = acc_y_plus - acc_y_minus; | 
 | 	ds->accel_calib_data[1].abs_code = ABS_Y; | 
 | 	ds->accel_calib_data[1].bias = acc_y_plus - range_2g / 2; | 
 | 	ds->accel_calib_data[1].sens_numer = 2*DS_ACC_RES_PER_G; | 
 | 	ds->accel_calib_data[1].sens_denom = range_2g; | 
 |  | 
 | 	range_2g = acc_z_plus - acc_z_minus; | 
 | 	ds->accel_calib_data[2].abs_code = ABS_Z; | 
 | 	ds->accel_calib_data[2].bias = acc_z_plus - range_2g / 2; | 
 | 	ds->accel_calib_data[2].sens_numer = 2*DS_ACC_RES_PER_G; | 
 | 	ds->accel_calib_data[2].sens_denom = range_2g; | 
 |  | 
 | 	/* | 
 | 	 * Sanity check accelerometer calibration data. This is needed to prevent crashes | 
 | 	 * during report handling of virtual, clone or broken devices not implementing calibration | 
 | 	 * data properly. | 
 | 	 */ | 
 | 	for (i = 0; i < ARRAY_SIZE(ds->accel_calib_data); i++) { | 
 | 		if (ds->accel_calib_data[i].sens_denom == 0) { | 
 | 			hid_warn(hdev, "Invalid accelerometer calibration data for axis (%d), disabling calibration.", | 
 | 					ds->accel_calib_data[i].abs_code); | 
 | 			ds->accel_calib_data[i].bias = 0; | 
 | 			ds->accel_calib_data[i].sens_numer = DS_ACC_RANGE; | 
 | 			ds->accel_calib_data[i].sens_denom = S16_MAX; | 
 | 		} | 
 | 	} | 
 |  | 
 | err_free: | 
 | 	kfree(buf); | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 | static int dualsense_get_firmware_info(struct dualsense *ds) | 
 | { | 
 | 	uint8_t *buf; | 
 | 	int ret; | 
 |  | 
 | 	buf = kzalloc(DS_FEATURE_REPORT_FIRMWARE_INFO_SIZE, GFP_KERNEL); | 
 | 	if (!buf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ret = ps_get_report(ds->base.hdev, DS_FEATURE_REPORT_FIRMWARE_INFO, buf, | 
 | 			DS_FEATURE_REPORT_FIRMWARE_INFO_SIZE, true); | 
 | 	if (ret) { | 
 | 		hid_err(ds->base.hdev, "Failed to retrieve DualSense firmware info: %d\n", ret); | 
 | 		goto err_free; | 
 | 	} | 
 |  | 
 | 	ds->base.hw_version = get_unaligned_le32(&buf[24]); | 
 | 	ds->base.fw_version = get_unaligned_le32(&buf[28]); | 
 |  | 
 | 	/* Update version is some kind of feature version. It is distinct from | 
 | 	 * the firmware version as there can be many different variations of a | 
 | 	 * controller over time with the same physical shell, but with different | 
 | 	 * PCBs and other internal changes. The update version (internal name) is | 
 | 	 * used as a means to detect what features are available and change behavior. | 
 | 	 * Note: the version is different between DualSense and DualSense Edge. | 
 | 	 */ | 
 | 	ds->update_version = get_unaligned_le16(&buf[44]); | 
 |  | 
 | err_free: | 
 | 	kfree(buf); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int dualsense_get_mac_address(struct dualsense *ds) | 
 | { | 
 | 	uint8_t *buf; | 
 | 	int ret = 0; | 
 |  | 
 | 	buf = kzalloc(DS_FEATURE_REPORT_PAIRING_INFO_SIZE, GFP_KERNEL); | 
 | 	if (!buf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ret = ps_get_report(ds->base.hdev, DS_FEATURE_REPORT_PAIRING_INFO, buf, | 
 | 			DS_FEATURE_REPORT_PAIRING_INFO_SIZE, true); | 
 | 	if (ret) { | 
 | 		hid_err(ds->base.hdev, "Failed to retrieve DualSense pairing info: %d\n", ret); | 
 | 		goto err_free; | 
 | 	} | 
 |  | 
 | 	memcpy(ds->base.mac_address, &buf[1], sizeof(ds->base.mac_address)); | 
 |  | 
 | err_free: | 
 | 	kfree(buf); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int dualsense_lightbar_set_brightness(struct led_classdev *cdev, | 
 | 	enum led_brightness brightness) | 
 | { | 
 | 	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev); | 
 | 	struct dualsense *ds = container_of(mc_cdev, struct dualsense, lightbar); | 
 | 	uint8_t red, green, blue; | 
 |  | 
 | 	led_mc_calc_color_components(mc_cdev, brightness); | 
 | 	red = mc_cdev->subled_info[0].brightness; | 
 | 	green = mc_cdev->subled_info[1].brightness; | 
 | 	blue = mc_cdev->subled_info[2].brightness; | 
 |  | 
 | 	dualsense_set_lightbar(ds, red, green, blue); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static enum led_brightness dualsense_player_led_get_brightness(struct led_classdev *led) | 
 | { | 
 | 	struct hid_device *hdev = to_hid_device(led->dev->parent); | 
 | 	struct dualsense *ds = hid_get_drvdata(hdev); | 
 |  | 
 | 	return !!(ds->player_leds_state & BIT(led - ds->player_leds)); | 
 | } | 
 |  | 
 | static int dualsense_player_led_set_brightness(struct led_classdev *led, enum led_brightness value) | 
 | { | 
 | 	struct hid_device *hdev = to_hid_device(led->dev->parent); | 
 | 	struct dualsense *ds = hid_get_drvdata(hdev); | 
 | 	unsigned long flags; | 
 | 	unsigned int led_index; | 
 |  | 
 | 	spin_lock_irqsave(&ds->base.lock, flags); | 
 |  | 
 | 	led_index = led - ds->player_leds; | 
 | 	if (value == LED_OFF) | 
 | 		ds->player_leds_state &= ~BIT(led_index); | 
 | 	else | 
 | 		ds->player_leds_state |= BIT(led_index); | 
 |  | 
 | 	ds->update_player_leds = true; | 
 | 	spin_unlock_irqrestore(&ds->base.lock, flags); | 
 |  | 
 | 	dualsense_schedule_work(ds); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void dualsense_init_output_report(struct dualsense *ds, struct dualsense_output_report *rp, | 
 | 		void *buf) | 
 | { | 
 | 	struct hid_device *hdev = ds->base.hdev; | 
 |  | 
 | 	if (hdev->bus == BUS_BLUETOOTH) { | 
 | 		struct dualsense_output_report_bt *bt = buf; | 
 |  | 
 | 		memset(bt, 0, sizeof(*bt)); | 
 | 		bt->report_id = DS_OUTPUT_REPORT_BT; | 
 | 		bt->tag = DS_OUTPUT_TAG; /* Tag must be set. Exact meaning is unclear. */ | 
 |  | 
 | 		/* | 
 | 		 * Highest 4-bit is a sequence number, which needs to be increased | 
 | 		 * every report. Lowest 4-bit is tag and can be zero for now. | 
 | 		 */ | 
 | 		bt->seq_tag = (ds->output_seq << 4) | 0x0; | 
 | 		if (++ds->output_seq == 16) | 
 | 			ds->output_seq = 0; | 
 |  | 
 | 		rp->data = buf; | 
 | 		rp->len = sizeof(*bt); | 
 | 		rp->bt = bt; | 
 | 		rp->usb = NULL; | 
 | 		rp->common = &bt->common; | 
 | 	} else { /* USB */ | 
 | 		struct dualsense_output_report_usb *usb = buf; | 
 |  | 
 | 		memset(usb, 0, sizeof(*usb)); | 
 | 		usb->report_id = DS_OUTPUT_REPORT_USB; | 
 |  | 
 | 		rp->data = buf; | 
 | 		rp->len = sizeof(*usb); | 
 | 		rp->bt = NULL; | 
 | 		rp->usb = usb; | 
 | 		rp->common = &usb->common; | 
 | 	} | 
 | } | 
 |  | 
 | static inline void dualsense_schedule_work(struct dualsense *ds) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&ds->base.lock, flags); | 
 | 	if (ds->output_worker_initialized) | 
 | 		schedule_work(&ds->output_worker); | 
 | 	spin_unlock_irqrestore(&ds->base.lock, flags); | 
 | } | 
 |  | 
 | /* | 
 |  * Helper function to send DualSense output reports. Applies a CRC at the end of a report | 
 |  * for Bluetooth reports. | 
 |  */ | 
 | static void dualsense_send_output_report(struct dualsense *ds, | 
 | 		struct dualsense_output_report *report) | 
 | { | 
 | 	struct hid_device *hdev = ds->base.hdev; | 
 |  | 
 | 	/* Bluetooth packets need to be signed with a CRC in the last 4 bytes. */ | 
 | 	if (report->bt) { | 
 | 		uint32_t crc; | 
 | 		uint8_t seed = PS_OUTPUT_CRC32_SEED; | 
 |  | 
 | 		crc = crc32_le(0xFFFFFFFF, &seed, 1); | 
 | 		crc = ~crc32_le(crc, report->data, report->len - 4); | 
 |  | 
 | 		report->bt->crc32 = cpu_to_le32(crc); | 
 | 	} | 
 |  | 
 | 	hid_hw_output_report(hdev, report->data, report->len); | 
 | } | 
 |  | 
 | static void dualsense_output_worker(struct work_struct *work) | 
 | { | 
 | 	struct dualsense *ds = container_of(work, struct dualsense, output_worker); | 
 | 	struct dualsense_output_report report; | 
 | 	struct dualsense_output_report_common *common; | 
 | 	unsigned long flags; | 
 |  | 
 | 	dualsense_init_output_report(ds, &report, ds->output_report_dmabuf); | 
 | 	common = report.common; | 
 |  | 
 | 	spin_lock_irqsave(&ds->base.lock, flags); | 
 |  | 
 | 	if (ds->update_rumble) { | 
 | 		/* Select classic rumble style haptics and enable it. */ | 
 | 		common->valid_flag0 |= DS_OUTPUT_VALID_FLAG0_HAPTICS_SELECT; | 
 | 		if (ds->use_vibration_v2) | 
 | 			common->valid_flag2 |= DS_OUTPUT_VALID_FLAG2_COMPATIBLE_VIBRATION2; | 
 | 		else | 
 | 			common->valid_flag0 |= DS_OUTPUT_VALID_FLAG0_COMPATIBLE_VIBRATION; | 
 | 		common->motor_left = ds->motor_left; | 
 | 		common->motor_right = ds->motor_right; | 
 | 		ds->update_rumble = false; | 
 | 	} | 
 |  | 
 | 	if (ds->update_lightbar) { | 
 | 		common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_LIGHTBAR_CONTROL_ENABLE; | 
 | 		common->lightbar_red = ds->lightbar_red; | 
 | 		common->lightbar_green = ds->lightbar_green; | 
 | 		common->lightbar_blue = ds->lightbar_blue; | 
 |  | 
 | 		ds->update_lightbar = false; | 
 | 	} | 
 |  | 
 | 	if (ds->update_player_leds) { | 
 | 		common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_PLAYER_INDICATOR_CONTROL_ENABLE; | 
 | 		common->player_leds = ds->player_leds_state; | 
 |  | 
 | 		ds->update_player_leds = false; | 
 | 	} | 
 |  | 
 | 	if (ds->update_mic_mute) { | 
 | 		common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_MIC_MUTE_LED_CONTROL_ENABLE; | 
 | 		common->mute_button_led = ds->mic_muted; | 
 |  | 
 | 		if (ds->mic_muted) { | 
 | 			/* Disable microphone */ | 
 | 			common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_POWER_SAVE_CONTROL_ENABLE; | 
 | 			common->power_save_control |= DS_OUTPUT_POWER_SAVE_CONTROL_MIC_MUTE; | 
 | 		} else { | 
 | 			/* Enable microphone */ | 
 | 			common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_POWER_SAVE_CONTROL_ENABLE; | 
 | 			common->power_save_control &= ~DS_OUTPUT_POWER_SAVE_CONTROL_MIC_MUTE; | 
 | 		} | 
 |  | 
 | 		ds->update_mic_mute = false; | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&ds->base.lock, flags); | 
 |  | 
 | 	dualsense_send_output_report(ds, &report); | 
 | } | 
 |  | 
 | static int dualsense_parse_report(struct ps_device *ps_dev, struct hid_report *report, | 
 | 		u8 *data, int size) | 
 | { | 
 | 	struct hid_device *hdev = ps_dev->hdev; | 
 | 	struct dualsense *ds = container_of(ps_dev, struct dualsense, base); | 
 | 	struct dualsense_input_report *ds_report; | 
 | 	uint8_t battery_data, battery_capacity, charging_status, value; | 
 | 	int battery_status; | 
 | 	uint32_t sensor_timestamp; | 
 | 	bool btn_mic_state; | 
 | 	unsigned long flags; | 
 | 	int i; | 
 |  | 
 | 	/* | 
 | 	 * DualSense in USB uses the full HID report for reportID 1, but | 
 | 	 * Bluetooth uses a minimal HID report for reportID 1 and reports | 
 | 	 * the full report using reportID 49. | 
 | 	 */ | 
 | 	if (hdev->bus == BUS_USB && report->id == DS_INPUT_REPORT_USB && | 
 | 			size == DS_INPUT_REPORT_USB_SIZE) { | 
 | 		ds_report = (struct dualsense_input_report *)&data[1]; | 
 | 	} else if (hdev->bus == BUS_BLUETOOTH && report->id == DS_INPUT_REPORT_BT && | 
 | 			size == DS_INPUT_REPORT_BT_SIZE) { | 
 | 		/* Last 4 bytes of input report contain crc32 */ | 
 | 		uint32_t report_crc = get_unaligned_le32(&data[size - 4]); | 
 |  | 
 | 		if (!ps_check_crc32(PS_INPUT_CRC32_SEED, data, size - 4, report_crc)) { | 
 | 			hid_err(hdev, "DualSense input CRC's check failed\n"); | 
 | 			return -EILSEQ; | 
 | 		} | 
 |  | 
 | 		ds_report = (struct dualsense_input_report *)&data[2]; | 
 | 	} else { | 
 | 		hid_err(hdev, "Unhandled reportID=%d\n", report->id); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	input_report_abs(ds->gamepad, ABS_X,  ds_report->x); | 
 | 	input_report_abs(ds->gamepad, ABS_Y,  ds_report->y); | 
 | 	input_report_abs(ds->gamepad, ABS_RX, ds_report->rx); | 
 | 	input_report_abs(ds->gamepad, ABS_RY, ds_report->ry); | 
 | 	input_report_abs(ds->gamepad, ABS_Z,  ds_report->z); | 
 | 	input_report_abs(ds->gamepad, ABS_RZ, ds_report->rz); | 
 |  | 
 | 	value = ds_report->buttons[0] & DS_BUTTONS0_HAT_SWITCH; | 
 | 	if (value >= ARRAY_SIZE(ps_gamepad_hat_mapping)) | 
 | 		value = 8; /* center */ | 
 | 	input_report_abs(ds->gamepad, ABS_HAT0X, ps_gamepad_hat_mapping[value].x); | 
 | 	input_report_abs(ds->gamepad, ABS_HAT0Y, ps_gamepad_hat_mapping[value].y); | 
 |  | 
 | 	input_report_key(ds->gamepad, BTN_WEST,   ds_report->buttons[0] & DS_BUTTONS0_SQUARE); | 
 | 	input_report_key(ds->gamepad, BTN_SOUTH,  ds_report->buttons[0] & DS_BUTTONS0_CROSS); | 
 | 	input_report_key(ds->gamepad, BTN_EAST,   ds_report->buttons[0] & DS_BUTTONS0_CIRCLE); | 
 | 	input_report_key(ds->gamepad, BTN_NORTH,  ds_report->buttons[0] & DS_BUTTONS0_TRIANGLE); | 
 | 	input_report_key(ds->gamepad, BTN_TL,     ds_report->buttons[1] & DS_BUTTONS1_L1); | 
 | 	input_report_key(ds->gamepad, BTN_TR,     ds_report->buttons[1] & DS_BUTTONS1_R1); | 
 | 	input_report_key(ds->gamepad, BTN_TL2,    ds_report->buttons[1] & DS_BUTTONS1_L2); | 
 | 	input_report_key(ds->gamepad, BTN_TR2,    ds_report->buttons[1] & DS_BUTTONS1_R2); | 
 | 	input_report_key(ds->gamepad, BTN_SELECT, ds_report->buttons[1] & DS_BUTTONS1_CREATE); | 
 | 	input_report_key(ds->gamepad, BTN_START,  ds_report->buttons[1] & DS_BUTTONS1_OPTIONS); | 
 | 	input_report_key(ds->gamepad, BTN_THUMBL, ds_report->buttons[1] & DS_BUTTONS1_L3); | 
 | 	input_report_key(ds->gamepad, BTN_THUMBR, ds_report->buttons[1] & DS_BUTTONS1_R3); | 
 | 	input_report_key(ds->gamepad, BTN_MODE,   ds_report->buttons[2] & DS_BUTTONS2_PS_HOME); | 
 | 	input_sync(ds->gamepad); | 
 |  | 
 | 	/* | 
 | 	 * The DualSense has an internal microphone, which can be muted through a mute button | 
 | 	 * on the device. The driver is expected to read the button state and program the device | 
 | 	 * to mute/unmute audio at the hardware level. | 
 | 	 */ | 
 | 	btn_mic_state = !!(ds_report->buttons[2] & DS_BUTTONS2_MIC_MUTE); | 
 | 	if (btn_mic_state && !ds->last_btn_mic_state) { | 
 | 		spin_lock_irqsave(&ps_dev->lock, flags); | 
 | 		ds->update_mic_mute = true; | 
 | 		ds->mic_muted = !ds->mic_muted; /* toggle */ | 
 | 		spin_unlock_irqrestore(&ps_dev->lock, flags); | 
 |  | 
 | 		/* Schedule updating of microphone state at hardware level. */ | 
 | 		dualsense_schedule_work(ds); | 
 | 	} | 
 | 	ds->last_btn_mic_state = btn_mic_state; | 
 |  | 
 | 	/* Parse and calibrate gyroscope data. */ | 
 | 	for (i = 0; i < ARRAY_SIZE(ds_report->gyro); i++) { | 
 | 		int raw_data = (short)le16_to_cpu(ds_report->gyro[i]); | 
 | 		int calib_data = mult_frac(ds->gyro_calib_data[i].sens_numer, | 
 | 					   raw_data, ds->gyro_calib_data[i].sens_denom); | 
 |  | 
 | 		input_report_abs(ds->sensors, ds->gyro_calib_data[i].abs_code, calib_data); | 
 | 	} | 
 |  | 
 | 	/* Parse and calibrate accelerometer data. */ | 
 | 	for (i = 0; i < ARRAY_SIZE(ds_report->accel); i++) { | 
 | 		int raw_data = (short)le16_to_cpu(ds_report->accel[i]); | 
 | 		int calib_data = mult_frac(ds->accel_calib_data[i].sens_numer, | 
 | 					   raw_data - ds->accel_calib_data[i].bias, | 
 | 					   ds->accel_calib_data[i].sens_denom); | 
 |  | 
 | 		input_report_abs(ds->sensors, ds->accel_calib_data[i].abs_code, calib_data); | 
 | 	} | 
 |  | 
 | 	/* Convert timestamp (in 0.33us unit) to timestamp_us */ | 
 | 	sensor_timestamp = le32_to_cpu(ds_report->sensor_timestamp); | 
 | 	if (!ds->sensor_timestamp_initialized) { | 
 | 		ds->sensor_timestamp_us = DIV_ROUND_CLOSEST(sensor_timestamp, 3); | 
 | 		ds->sensor_timestamp_initialized = true; | 
 | 	} else { | 
 | 		uint32_t delta; | 
 |  | 
 | 		if (ds->prev_sensor_timestamp > sensor_timestamp) | 
 | 			delta = (U32_MAX - ds->prev_sensor_timestamp + sensor_timestamp + 1); | 
 | 		else | 
 | 			delta = sensor_timestamp - ds->prev_sensor_timestamp; | 
 | 		ds->sensor_timestamp_us += DIV_ROUND_CLOSEST(delta, 3); | 
 | 	} | 
 | 	ds->prev_sensor_timestamp = sensor_timestamp; | 
 | 	input_event(ds->sensors, EV_MSC, MSC_TIMESTAMP, ds->sensor_timestamp_us); | 
 | 	input_sync(ds->sensors); | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(ds_report->points); i++) { | 
 | 		struct dualsense_touch_point *point = &ds_report->points[i]; | 
 | 		bool active = (point->contact & DS_TOUCH_POINT_INACTIVE) ? false : true; | 
 |  | 
 | 		input_mt_slot(ds->touchpad, i); | 
 | 		input_mt_report_slot_state(ds->touchpad, MT_TOOL_FINGER, active); | 
 |  | 
 | 		if (active) { | 
 | 			int x = (point->x_hi << 8) | point->x_lo; | 
 | 			int y = (point->y_hi << 4) | point->y_lo; | 
 |  | 
 | 			input_report_abs(ds->touchpad, ABS_MT_POSITION_X, x); | 
 | 			input_report_abs(ds->touchpad, ABS_MT_POSITION_Y, y); | 
 | 		} | 
 | 	} | 
 | 	input_mt_sync_frame(ds->touchpad); | 
 | 	input_report_key(ds->touchpad, BTN_LEFT, ds_report->buttons[2] & DS_BUTTONS2_TOUCHPAD); | 
 | 	input_sync(ds->touchpad); | 
 |  | 
 | 	battery_data = ds_report->status & DS_STATUS_BATTERY_CAPACITY; | 
 | 	charging_status = (ds_report->status & DS_STATUS_CHARGING) >> DS_STATUS_CHARGING_SHIFT; | 
 |  | 
 | 	switch (charging_status) { | 
 | 	case 0x0: | 
 | 		/* | 
 | 		 * Each unit of battery data corresponds to 10% | 
 | 		 * 0 = 0-9%, 1 = 10-19%, .. and 10 = 100% | 
 | 		 */ | 
 | 		battery_capacity = min(battery_data * 10 + 5, 100); | 
 | 		battery_status = POWER_SUPPLY_STATUS_DISCHARGING; | 
 | 		break; | 
 | 	case 0x1: | 
 | 		battery_capacity = min(battery_data * 10 + 5, 100); | 
 | 		battery_status = POWER_SUPPLY_STATUS_CHARGING; | 
 | 		break; | 
 | 	case 0x2: | 
 | 		battery_capacity = 100; | 
 | 		battery_status = POWER_SUPPLY_STATUS_FULL; | 
 | 		break; | 
 | 	case 0xa: /* voltage or temperature out of range */ | 
 | 	case 0xb: /* temperature error */ | 
 | 		battery_capacity = 0; | 
 | 		battery_status = POWER_SUPPLY_STATUS_NOT_CHARGING; | 
 | 		break; | 
 | 	case 0xf: /* charging error */ | 
 | 	default: | 
 | 		battery_capacity = 0; | 
 | 		battery_status = POWER_SUPPLY_STATUS_UNKNOWN; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&ps_dev->lock, flags); | 
 | 	ps_dev->battery_capacity = battery_capacity; | 
 | 	ps_dev->battery_status = battery_status; | 
 | 	spin_unlock_irqrestore(&ps_dev->lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dualsense_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect) | 
 | { | 
 | 	struct hid_device *hdev = input_get_drvdata(dev); | 
 | 	struct dualsense *ds = hid_get_drvdata(hdev); | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (effect->type != FF_RUMBLE) | 
 | 		return 0; | 
 |  | 
 | 	spin_lock_irqsave(&ds->base.lock, flags); | 
 | 	ds->update_rumble = true; | 
 | 	ds->motor_left = effect->u.rumble.strong_magnitude / 256; | 
 | 	ds->motor_right = effect->u.rumble.weak_magnitude / 256; | 
 | 	spin_unlock_irqrestore(&ds->base.lock, flags); | 
 |  | 
 | 	dualsense_schedule_work(ds); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void dualsense_remove(struct ps_device *ps_dev) | 
 | { | 
 | 	struct dualsense *ds = container_of(ps_dev, struct dualsense, base); | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&ds->base.lock, flags); | 
 | 	ds->output_worker_initialized = false; | 
 | 	spin_unlock_irqrestore(&ds->base.lock, flags); | 
 |  | 
 | 	cancel_work_sync(&ds->output_worker); | 
 | } | 
 |  | 
 | static int dualsense_reset_leds(struct dualsense *ds) | 
 | { | 
 | 	struct dualsense_output_report report; | 
 | 	uint8_t *buf; | 
 |  | 
 | 	buf = kzalloc(sizeof(struct dualsense_output_report_bt), GFP_KERNEL); | 
 | 	if (!buf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	dualsense_init_output_report(ds, &report, buf); | 
 | 	/* | 
 | 	 * On Bluetooth the DualSense outputs an animation on the lightbar | 
 | 	 * during startup and maintains a color afterwards. We need to explicitly | 
 | 	 * reconfigure the lightbar before we can do any programming later on. | 
 | 	 * In USB the lightbar is not on by default, but redoing the setup there | 
 | 	 * doesn't hurt. | 
 | 	 */ | 
 | 	report.common->valid_flag2 = DS_OUTPUT_VALID_FLAG2_LIGHTBAR_SETUP_CONTROL_ENABLE; | 
 | 	report.common->lightbar_setup = DS_OUTPUT_LIGHTBAR_SETUP_LIGHT_OUT; /* Fade light out. */ | 
 | 	dualsense_send_output_report(ds, &report); | 
 |  | 
 | 	kfree(buf); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void dualsense_set_lightbar(struct dualsense *ds, uint8_t red, uint8_t green, uint8_t blue) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&ds->base.lock, flags); | 
 | 	ds->update_lightbar = true; | 
 | 	ds->lightbar_red = red; | 
 | 	ds->lightbar_green = green; | 
 | 	ds->lightbar_blue = blue; | 
 | 	spin_unlock_irqrestore(&ds->base.lock, flags); | 
 |  | 
 | 	dualsense_schedule_work(ds); | 
 | } | 
 |  | 
 | static void dualsense_set_player_leds(struct dualsense *ds) | 
 | { | 
 | 	/* | 
 | 	 * The DualSense controller has a row of 5 LEDs used for player ids. | 
 | 	 * Behavior on the PlayStation 5 console is to center the player id | 
 | 	 * across the LEDs, so e.g. player 1 would be "--x--" with x being 'on'. | 
 | 	 * Follow a similar mapping here. | 
 | 	 */ | 
 | 	static const int player_ids[5] = { | 
 | 		BIT(2), | 
 | 		BIT(3) | BIT(1), | 
 | 		BIT(4) | BIT(2) | BIT(0), | 
 | 		BIT(4) | BIT(3) | BIT(1) | BIT(0), | 
 | 		BIT(4) | BIT(3) | BIT(2) | BIT(1) | BIT(0) | 
 | 	}; | 
 |  | 
 | 	uint8_t player_id = ds->base.player_id % ARRAY_SIZE(player_ids); | 
 |  | 
 | 	ds->update_player_leds = true; | 
 | 	ds->player_leds_state = player_ids[player_id]; | 
 | 	dualsense_schedule_work(ds); | 
 | } | 
 |  | 
 | static struct ps_device *dualsense_create(struct hid_device *hdev) | 
 | { | 
 | 	struct dualsense *ds; | 
 | 	struct ps_device *ps_dev; | 
 | 	uint8_t max_output_report_size; | 
 | 	int i, ret; | 
 |  | 
 | 	static const struct ps_led_info player_leds_info[] = { | 
 | 		{ LED_FUNCTION_PLAYER1, "white", 1, dualsense_player_led_get_brightness, | 
 | 				dualsense_player_led_set_brightness }, | 
 | 		{ LED_FUNCTION_PLAYER2, "white", 1, dualsense_player_led_get_brightness, | 
 | 				dualsense_player_led_set_brightness }, | 
 | 		{ LED_FUNCTION_PLAYER3, "white", 1, dualsense_player_led_get_brightness, | 
 | 				dualsense_player_led_set_brightness }, | 
 | 		{ LED_FUNCTION_PLAYER4, "white", 1, dualsense_player_led_get_brightness, | 
 | 				dualsense_player_led_set_brightness }, | 
 | 		{ LED_FUNCTION_PLAYER5, "white", 1, dualsense_player_led_get_brightness, | 
 | 				dualsense_player_led_set_brightness } | 
 | 	}; | 
 |  | 
 | 	ds = devm_kzalloc(&hdev->dev, sizeof(*ds), GFP_KERNEL); | 
 | 	if (!ds) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	/* | 
 | 	 * Patch version to allow userspace to distinguish between | 
 | 	 * hid-generic vs hid-playstation axis and button mapping. | 
 | 	 */ | 
 | 	hdev->version |= HID_PLAYSTATION_VERSION_PATCH; | 
 |  | 
 | 	ps_dev = &ds->base; | 
 | 	ps_dev->hdev = hdev; | 
 | 	spin_lock_init(&ps_dev->lock); | 
 | 	ps_dev->battery_capacity = 100; /* initial value until parse_report. */ | 
 | 	ps_dev->battery_status = POWER_SUPPLY_STATUS_UNKNOWN; | 
 | 	ps_dev->parse_report = dualsense_parse_report; | 
 | 	ps_dev->remove = dualsense_remove; | 
 | 	INIT_WORK(&ds->output_worker, dualsense_output_worker); | 
 | 	ds->output_worker_initialized = true; | 
 | 	hid_set_drvdata(hdev, ds); | 
 |  | 
 | 	max_output_report_size = sizeof(struct dualsense_output_report_bt); | 
 | 	ds->output_report_dmabuf = devm_kzalloc(&hdev->dev, max_output_report_size, GFP_KERNEL); | 
 | 	if (!ds->output_report_dmabuf) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	ret = dualsense_get_mac_address(ds); | 
 | 	if (ret) { | 
 | 		hid_err(hdev, "Failed to get MAC address from DualSense\n"); | 
 | 		return ERR_PTR(ret); | 
 | 	} | 
 | 	snprintf(hdev->uniq, sizeof(hdev->uniq), "%pMR", ds->base.mac_address); | 
 |  | 
 | 	ret = dualsense_get_firmware_info(ds); | 
 | 	if (ret) { | 
 | 		hid_err(hdev, "Failed to get firmware info from DualSense\n"); | 
 | 		return ERR_PTR(ret); | 
 | 	} | 
 |  | 
 | 	/* Original DualSense firmware simulated classic controller rumble through | 
 | 	 * its new haptics hardware. It felt different from classic rumble users | 
 | 	 * were used to. Since then new firmwares were introduced to change behavior | 
 | 	 * and make this new 'v2' behavior default on PlayStation and other platforms. | 
 | 	 * The original DualSense requires a new enough firmware as bundled with PS5 | 
 | 	 * software released in 2021. DualSense edge supports it out of the box. | 
 | 	 * Both devices also support the old mode, but it is not really used. | 
 | 	 */ | 
 | 	if (hdev->product == USB_DEVICE_ID_SONY_PS5_CONTROLLER) { | 
 | 		/* Feature version 2.21 introduced new vibration method. */ | 
 | 		ds->use_vibration_v2 = ds->update_version >= DS_FEATURE_VERSION(2, 21); | 
 | 	} else if (hdev->product == USB_DEVICE_ID_SONY_PS5_CONTROLLER_2) { | 
 | 		ds->use_vibration_v2 = true; | 
 | 	} | 
 |  | 
 | 	ret = ps_devices_list_add(ps_dev); | 
 | 	if (ret) | 
 | 		return ERR_PTR(ret); | 
 |  | 
 | 	ret = dualsense_get_calibration_data(ds); | 
 | 	if (ret) { | 
 | 		hid_err(hdev, "Failed to get calibration data from DualSense\n"); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	ds->gamepad = ps_gamepad_create(hdev, dualsense_play_effect); | 
 | 	if (IS_ERR(ds->gamepad)) { | 
 | 		ret = PTR_ERR(ds->gamepad); | 
 | 		goto err; | 
 | 	} | 
 | 	/* Use gamepad input device name as primary device name for e.g. LEDs */ | 
 | 	ps_dev->input_dev_name = dev_name(&ds->gamepad->dev); | 
 |  | 
 | 	ds->sensors = ps_sensors_create(hdev, DS_ACC_RANGE, DS_ACC_RES_PER_G, | 
 | 			DS_GYRO_RANGE, DS_GYRO_RES_PER_DEG_S); | 
 | 	if (IS_ERR(ds->sensors)) { | 
 | 		ret = PTR_ERR(ds->sensors); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	ds->touchpad = ps_touchpad_create(hdev, DS_TOUCHPAD_WIDTH, DS_TOUCHPAD_HEIGHT, 2); | 
 | 	if (IS_ERR(ds->touchpad)) { | 
 | 		ret = PTR_ERR(ds->touchpad); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	ret = ps_device_register_battery(ps_dev); | 
 | 	if (ret) | 
 | 		goto err; | 
 |  | 
 | 	/* | 
 | 	 * The hardware may have control over the LEDs (e.g. in Bluetooth on startup). | 
 | 	 * Reset the LEDs (lightbar, mute, player leds), so we can control them | 
 | 	 * from software. | 
 | 	 */ | 
 | 	ret = dualsense_reset_leds(ds); | 
 | 	if (ret) | 
 | 		goto err; | 
 |  | 
 | 	ret = ps_lightbar_register(ps_dev, &ds->lightbar, dualsense_lightbar_set_brightness); | 
 | 	if (ret) | 
 | 		goto err; | 
 |  | 
 | 	/* Set default lightbar color. */ | 
 | 	dualsense_set_lightbar(ds, 0, 0, 128); /* blue */ | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(player_leds_info); i++) { | 
 | 		const struct ps_led_info *led_info = &player_leds_info[i]; | 
 |  | 
 | 		ret = ps_led_register(ps_dev, &ds->player_leds[i], led_info); | 
 | 		if (ret < 0) | 
 | 			goto err; | 
 | 	} | 
 |  | 
 | 	ret = ps_device_set_player_id(ps_dev); | 
 | 	if (ret) { | 
 | 		hid_err(hdev, "Failed to assign player id for DualSense: %d\n", ret); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* Set player LEDs to our player id. */ | 
 | 	dualsense_set_player_leds(ds); | 
 |  | 
 | 	/* | 
 | 	 * Reporting hardware and firmware is important as there are frequent updates, which | 
 | 	 * can change behavior. | 
 | 	 */ | 
 | 	hid_info(hdev, "Registered DualSense controller hw_version=0x%08x fw_version=0x%08x\n", | 
 | 			ds->base.hw_version, ds->base.fw_version); | 
 |  | 
 | 	return &ds->base; | 
 |  | 
 | err: | 
 | 	ps_devices_list_remove(ps_dev); | 
 | 	return ERR_PTR(ret); | 
 | } | 
 |  | 
 | static void dualshock4_dongle_calibration_work(struct work_struct *work) | 
 | { | 
 | 	struct dualshock4 *ds4 = container_of(work, struct dualshock4, dongle_hotplug_worker); | 
 | 	unsigned long flags; | 
 | 	enum dualshock4_dongle_state dongle_state; | 
 | 	int ret; | 
 |  | 
 | 	ret = dualshock4_get_calibration_data(ds4); | 
 | 	if (ret < 0) { | 
 | 		/* This call is very unlikely to fail for the dongle. When it | 
 | 		 * fails we are probably in a very bad state, so mark the | 
 | 		 * dongle as disabled. We will re-enable the dongle if a new | 
 | 		 * DS4 hotplug is detect from sony_raw_event as any issues | 
 | 		 * are likely resolved then (the dongle is quite stupid). | 
 | 		 */ | 
 | 		hid_err(ds4->base.hdev, "DualShock 4 USB dongle: calibration failed, disabling device\n"); | 
 | 		dongle_state = DONGLE_DISABLED; | 
 | 	} else { | 
 | 		hid_info(ds4->base.hdev, "DualShock 4 USB dongle: calibration completed\n"); | 
 | 		dongle_state = DONGLE_CONNECTED; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&ds4->base.lock, flags); | 
 | 	ds4->dongle_state = dongle_state; | 
 | 	spin_unlock_irqrestore(&ds4->base.lock, flags); | 
 | } | 
 |  | 
 | static int dualshock4_get_calibration_data(struct dualshock4 *ds4) | 
 | { | 
 | 	struct hid_device *hdev = ds4->base.hdev; | 
 | 	short gyro_pitch_bias, gyro_pitch_plus, gyro_pitch_minus; | 
 | 	short gyro_yaw_bias, gyro_yaw_plus, gyro_yaw_minus; | 
 | 	short gyro_roll_bias, gyro_roll_plus, gyro_roll_minus; | 
 | 	short gyro_speed_plus, gyro_speed_minus; | 
 | 	short acc_x_plus, acc_x_minus; | 
 | 	short acc_y_plus, acc_y_minus; | 
 | 	short acc_z_plus, acc_z_minus; | 
 | 	int speed_2x; | 
 | 	int range_2g; | 
 | 	int ret = 0; | 
 | 	int i; | 
 | 	uint8_t *buf; | 
 |  | 
 | 	if (ds4->base.hdev->bus == BUS_USB) { | 
 | 		int retries; | 
 |  | 
 | 		buf = kzalloc(DS4_FEATURE_REPORT_CALIBRATION_SIZE, GFP_KERNEL); | 
 | 		if (!buf) { | 
 | 			ret = -ENOMEM; | 
 | 			goto transfer_failed; | 
 | 		} | 
 |  | 
 | 		/* We should normally receive the feature report data we asked | 
 | 		 * for, but hidraw applications such as Steam can issue feature | 
 | 		 * reports as well. In particular for Dongle reconnects, Steam | 
 | 		 * and this function are competing resulting in often receiving | 
 | 		 * data for a different HID report, so retry a few times. | 
 | 		 */ | 
 | 		for (retries = 0; retries < 3; retries++) { | 
 | 			ret = ps_get_report(hdev, DS4_FEATURE_REPORT_CALIBRATION, buf, | 
 | 					DS4_FEATURE_REPORT_CALIBRATION_SIZE, true); | 
 | 			if (ret) { | 
 | 				if (retries < 2) { | 
 | 					hid_warn(hdev, "Retrying DualShock 4 get calibration report (0x02) request\n"); | 
 | 					continue; | 
 | 				} | 
 |  | 
 | 				hid_warn(hdev, "Failed to retrieve DualShock4 calibration info: %d\n", ret); | 
 | 				ret = -EILSEQ; | 
 | 				goto transfer_failed; | 
 | 			} else { | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} else { /* Bluetooth */ | 
 | 		buf = kzalloc(DS4_FEATURE_REPORT_CALIBRATION_BT_SIZE, GFP_KERNEL); | 
 | 		if (!buf) { | 
 | 			ret = -ENOMEM; | 
 | 			goto transfer_failed; | 
 | 		} | 
 |  | 
 | 		ret = ps_get_report(hdev, DS4_FEATURE_REPORT_CALIBRATION_BT, buf, | 
 | 				DS4_FEATURE_REPORT_CALIBRATION_BT_SIZE, true); | 
 |  | 
 | 		if (ret) { | 
 | 			hid_warn(hdev, "Failed to retrieve DualShock4 calibration info: %d\n", ret); | 
 | 			goto transfer_failed; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Transfer succeeded - parse the calibration data received. */ | 
 | 	gyro_pitch_bias  = get_unaligned_le16(&buf[1]); | 
 | 	gyro_yaw_bias    = get_unaligned_le16(&buf[3]); | 
 | 	gyro_roll_bias   = get_unaligned_le16(&buf[5]); | 
 | 	if (ds4->base.hdev->bus == BUS_USB) { | 
 | 		gyro_pitch_plus  = get_unaligned_le16(&buf[7]); | 
 | 		gyro_pitch_minus = get_unaligned_le16(&buf[9]); | 
 | 		gyro_yaw_plus    = get_unaligned_le16(&buf[11]); | 
 | 		gyro_yaw_minus   = get_unaligned_le16(&buf[13]); | 
 | 		gyro_roll_plus   = get_unaligned_le16(&buf[15]); | 
 | 		gyro_roll_minus  = get_unaligned_le16(&buf[17]); | 
 | 	} else { | 
 | 		/* BT + Dongle */ | 
 | 		gyro_pitch_plus  = get_unaligned_le16(&buf[7]); | 
 | 		gyro_yaw_plus    = get_unaligned_le16(&buf[9]); | 
 | 		gyro_roll_plus   = get_unaligned_le16(&buf[11]); | 
 | 		gyro_pitch_minus = get_unaligned_le16(&buf[13]); | 
 | 		gyro_yaw_minus   = get_unaligned_le16(&buf[15]); | 
 | 		gyro_roll_minus  = get_unaligned_le16(&buf[17]); | 
 | 	} | 
 | 	gyro_speed_plus  = get_unaligned_le16(&buf[19]); | 
 | 	gyro_speed_minus = get_unaligned_le16(&buf[21]); | 
 | 	acc_x_plus       = get_unaligned_le16(&buf[23]); | 
 | 	acc_x_minus      = get_unaligned_le16(&buf[25]); | 
 | 	acc_y_plus       = get_unaligned_le16(&buf[27]); | 
 | 	acc_y_minus      = get_unaligned_le16(&buf[29]); | 
 | 	acc_z_plus       = get_unaligned_le16(&buf[31]); | 
 | 	acc_z_minus      = get_unaligned_le16(&buf[33]); | 
 |  | 
 | 	/* Done parsing the buffer, so let's free it. */ | 
 | 	kfree(buf); | 
 |  | 
 | 	/* | 
 | 	 * Set gyroscope calibration and normalization parameters. | 
 | 	 * Data values will be normalized to 1/DS4_GYRO_RES_PER_DEG_S degree/s. | 
 | 	 */ | 
 | 	speed_2x = (gyro_speed_plus + gyro_speed_minus); | 
 | 	ds4->gyro_calib_data[0].abs_code = ABS_RX; | 
 | 	ds4->gyro_calib_data[0].bias = 0; | 
 | 	ds4->gyro_calib_data[0].sens_numer = speed_2x*DS4_GYRO_RES_PER_DEG_S; | 
 | 	ds4->gyro_calib_data[0].sens_denom = abs(gyro_pitch_plus - gyro_pitch_bias) + | 
 | 			abs(gyro_pitch_minus - gyro_pitch_bias); | 
 |  | 
 | 	ds4->gyro_calib_data[1].abs_code = ABS_RY; | 
 | 	ds4->gyro_calib_data[1].bias = 0; | 
 | 	ds4->gyro_calib_data[1].sens_numer = speed_2x*DS4_GYRO_RES_PER_DEG_S; | 
 | 	ds4->gyro_calib_data[1].sens_denom = abs(gyro_yaw_plus - gyro_yaw_bias) + | 
 | 			abs(gyro_yaw_minus - gyro_yaw_bias); | 
 |  | 
 | 	ds4->gyro_calib_data[2].abs_code = ABS_RZ; | 
 | 	ds4->gyro_calib_data[2].bias = 0; | 
 | 	ds4->gyro_calib_data[2].sens_numer = speed_2x*DS4_GYRO_RES_PER_DEG_S; | 
 | 	ds4->gyro_calib_data[2].sens_denom = abs(gyro_roll_plus - gyro_roll_bias) + | 
 | 			abs(gyro_roll_minus - gyro_roll_bias); | 
 |  | 
 | 	/* | 
 | 	 * Set accelerometer calibration and normalization parameters. | 
 | 	 * Data values will be normalized to 1/DS4_ACC_RES_PER_G g. | 
 | 	 */ | 
 | 	range_2g = acc_x_plus - acc_x_minus; | 
 | 	ds4->accel_calib_data[0].abs_code = ABS_X; | 
 | 	ds4->accel_calib_data[0].bias = acc_x_plus - range_2g / 2; | 
 | 	ds4->accel_calib_data[0].sens_numer = 2*DS4_ACC_RES_PER_G; | 
 | 	ds4->accel_calib_data[0].sens_denom = range_2g; | 
 |  | 
 | 	range_2g = acc_y_plus - acc_y_minus; | 
 | 	ds4->accel_calib_data[1].abs_code = ABS_Y; | 
 | 	ds4->accel_calib_data[1].bias = acc_y_plus - range_2g / 2; | 
 | 	ds4->accel_calib_data[1].sens_numer = 2*DS4_ACC_RES_PER_G; | 
 | 	ds4->accel_calib_data[1].sens_denom = range_2g; | 
 |  | 
 | 	range_2g = acc_z_plus - acc_z_minus; | 
 | 	ds4->accel_calib_data[2].abs_code = ABS_Z; | 
 | 	ds4->accel_calib_data[2].bias = acc_z_plus - range_2g / 2; | 
 | 	ds4->accel_calib_data[2].sens_numer = 2*DS4_ACC_RES_PER_G; | 
 | 	ds4->accel_calib_data[2].sens_denom = range_2g; | 
 |  | 
 | transfer_failed: | 
 | 	/* | 
 | 	 * Sanity check gyro calibration data. This is needed to prevent crashes | 
 | 	 * during report handling of virtual, clone or broken devices not implementing | 
 | 	 * calibration data properly. | 
 | 	 */ | 
 | 	for (i = 0; i < ARRAY_SIZE(ds4->gyro_calib_data); i++) { | 
 | 		if (ds4->gyro_calib_data[i].sens_denom == 0) { | 
 | 			ds4->gyro_calib_data[i].abs_code = ABS_RX + i; | 
 | 			hid_warn(hdev, "Invalid gyro calibration data for axis (%d), disabling calibration.", | 
 | 					ds4->gyro_calib_data[i].abs_code); | 
 | 			ds4->gyro_calib_data[i].bias = 0; | 
 | 			ds4->gyro_calib_data[i].sens_numer = DS4_GYRO_RANGE; | 
 | 			ds4->gyro_calib_data[i].sens_denom = S16_MAX; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Sanity check accelerometer calibration data. This is needed to prevent crashes | 
 | 	 * during report handling of virtual, clone or broken devices not implementing calibration | 
 | 	 * data properly. | 
 | 	 */ | 
 | 	for (i = 0; i < ARRAY_SIZE(ds4->accel_calib_data); i++) { | 
 | 		if (ds4->accel_calib_data[i].sens_denom == 0) { | 
 | 			ds4->accel_calib_data[i].abs_code = ABS_X + i; | 
 | 			hid_warn(hdev, "Invalid accelerometer calibration data for axis (%d), disabling calibration.", | 
 | 					ds4->accel_calib_data[i].abs_code); | 
 | 			ds4->accel_calib_data[i].bias = 0; | 
 | 			ds4->accel_calib_data[i].sens_numer = DS4_ACC_RANGE; | 
 | 			ds4->accel_calib_data[i].sens_denom = S16_MAX; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int dualshock4_get_firmware_info(struct dualshock4 *ds4) | 
 | { | 
 | 	uint8_t *buf; | 
 | 	int ret; | 
 |  | 
 | 	buf = kzalloc(DS4_FEATURE_REPORT_FIRMWARE_INFO_SIZE, GFP_KERNEL); | 
 | 	if (!buf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* Note USB and BT support the same feature report, but this report | 
 | 	 * lacks CRC support, so must be disabled in ps_get_report. | 
 | 	 */ | 
 | 	ret = ps_get_report(ds4->base.hdev, DS4_FEATURE_REPORT_FIRMWARE_INFO, buf, | 
 | 			DS4_FEATURE_REPORT_FIRMWARE_INFO_SIZE, false); | 
 | 	if (ret) { | 
 | 		hid_err(ds4->base.hdev, "Failed to retrieve DualShock4 firmware info: %d\n", ret); | 
 | 		goto err_free; | 
 | 	} | 
 |  | 
 | 	ds4->base.hw_version = get_unaligned_le16(&buf[35]); | 
 | 	ds4->base.fw_version = get_unaligned_le16(&buf[41]); | 
 |  | 
 | err_free: | 
 | 	kfree(buf); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int dualshock4_get_mac_address(struct dualshock4 *ds4) | 
 | { | 
 | 	struct hid_device *hdev = ds4->base.hdev; | 
 | 	uint8_t *buf; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (hdev->bus == BUS_USB) { | 
 | 		buf = kzalloc(DS4_FEATURE_REPORT_PAIRING_INFO_SIZE, GFP_KERNEL); | 
 | 		if (!buf) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		ret = ps_get_report(hdev, DS4_FEATURE_REPORT_PAIRING_INFO, buf, | 
 | 				DS4_FEATURE_REPORT_PAIRING_INFO_SIZE, false); | 
 | 		if (ret) { | 
 | 			hid_err(hdev, "Failed to retrieve DualShock4 pairing info: %d\n", ret); | 
 | 			goto err_free; | 
 | 		} | 
 |  | 
 | 		memcpy(ds4->base.mac_address, &buf[1], sizeof(ds4->base.mac_address)); | 
 | 	} else { | 
 | 		/* Rely on HIDP for Bluetooth */ | 
 | 		if (strlen(hdev->uniq) != 17) | 
 | 			return -EINVAL; | 
 |  | 
 | 		ret = sscanf(hdev->uniq, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", | 
 | 				&ds4->base.mac_address[5], &ds4->base.mac_address[4], | 
 | 				&ds4->base.mac_address[3], &ds4->base.mac_address[2], | 
 | 				&ds4->base.mac_address[1], &ds4->base.mac_address[0]); | 
 |  | 
 | 		if (ret != sizeof(ds4->base.mac_address)) | 
 | 			return -EINVAL; | 
 |  | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | err_free: | 
 | 	kfree(buf); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static enum led_brightness dualshock4_led_get_brightness(struct led_classdev *led) | 
 | { | 
 | 	struct hid_device *hdev = to_hid_device(led->dev->parent); | 
 | 	struct dualshock4 *ds4 = hid_get_drvdata(hdev); | 
 | 	unsigned int led_index; | 
 |  | 
 | 	led_index = led - ds4->lightbar_leds; | 
 | 	switch (led_index) { | 
 | 	case 0: | 
 | 		return ds4->lightbar_red; | 
 | 	case 1: | 
 | 		return ds4->lightbar_green; | 
 | 	case 2: | 
 | 		return ds4->lightbar_blue; | 
 | 	case 3: | 
 | 		return ds4->lightbar_enabled; | 
 | 	} | 
 |  | 
 | 	return -1; | 
 | } | 
 |  | 
 | static int dualshock4_led_set_blink(struct led_classdev *led, unsigned long *delay_on, | 
 | 		unsigned long *delay_off) | 
 | { | 
 | 	struct hid_device *hdev = to_hid_device(led->dev->parent); | 
 | 	struct dualshock4 *ds4 = hid_get_drvdata(hdev); | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&ds4->base.lock, flags); | 
 |  | 
 | 	if (!*delay_on && !*delay_off) { | 
 | 		/* Default to 1 Hz (50 centiseconds on, 50 centiseconds off). */ | 
 | 		ds4->lightbar_blink_on = 50; | 
 | 		ds4->lightbar_blink_off = 50; | 
 | 	} else { | 
 | 		/* Blink delays in centiseconds. */ | 
 | 		ds4->lightbar_blink_on = min_t(unsigned long, *delay_on/10, DS4_LIGHTBAR_MAX_BLINK); | 
 | 		ds4->lightbar_blink_off = min_t(unsigned long, *delay_off/10, DS4_LIGHTBAR_MAX_BLINK); | 
 | 	} | 
 |  | 
 | 	ds4->update_lightbar_blink = true; | 
 |  | 
 | 	spin_unlock_irqrestore(&ds4->base.lock, flags); | 
 |  | 
 | 	dualshock4_schedule_work(ds4); | 
 |  | 
 | 	/* Report scaled values back to LED subsystem */ | 
 | 	*delay_on = ds4->lightbar_blink_on * 10; | 
 | 	*delay_off = ds4->lightbar_blink_off * 10; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dualshock4_led_set_brightness(struct led_classdev *led, enum led_brightness value) | 
 | { | 
 | 	struct hid_device *hdev = to_hid_device(led->dev->parent); | 
 | 	struct dualshock4 *ds4 = hid_get_drvdata(hdev); | 
 | 	unsigned long flags; | 
 | 	unsigned int led_index; | 
 |  | 
 | 	spin_lock_irqsave(&ds4->base.lock, flags); | 
 |  | 
 | 	led_index = led - ds4->lightbar_leds; | 
 | 	switch (led_index) { | 
 | 	case 0: | 
 | 		ds4->lightbar_red = value; | 
 | 		break; | 
 | 	case 1: | 
 | 		ds4->lightbar_green = value; | 
 | 		break; | 
 | 	case 2: | 
 | 		ds4->lightbar_blue = value; | 
 | 		break; | 
 | 	case 3: | 
 | 		ds4->lightbar_enabled = !!value; | 
 |  | 
 | 		/* brightness = 0 also cancels blinking in Linux. */ | 
 | 		if (!ds4->lightbar_enabled) { | 
 | 			ds4->lightbar_blink_off = 0; | 
 | 			ds4->lightbar_blink_on = 0; | 
 | 			ds4->update_lightbar_blink = true; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ds4->update_lightbar = true; | 
 |  | 
 | 	spin_unlock_irqrestore(&ds4->base.lock, flags); | 
 |  | 
 | 	dualshock4_schedule_work(ds4); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void dualshock4_init_output_report(struct dualshock4 *ds4, | 
 | 		struct dualshock4_output_report *rp, void *buf) | 
 | { | 
 | 	struct hid_device *hdev = ds4->base.hdev; | 
 |  | 
 | 	if (hdev->bus == BUS_BLUETOOTH) { | 
 | 		struct dualshock4_output_report_bt *bt = buf; | 
 |  | 
 | 		memset(bt, 0, sizeof(*bt)); | 
 | 		bt->report_id = DS4_OUTPUT_REPORT_BT; | 
 |  | 
 | 		rp->data = buf; | 
 | 		rp->len = sizeof(*bt); | 
 | 		rp->bt = bt; | 
 | 		rp->usb = NULL; | 
 | 		rp->common = &bt->common; | 
 | 	} else { /* USB */ | 
 | 		struct dualshock4_output_report_usb *usb = buf; | 
 |  | 
 | 		memset(usb, 0, sizeof(*usb)); | 
 | 		usb->report_id = DS4_OUTPUT_REPORT_USB; | 
 |  | 
 | 		rp->data = buf; | 
 | 		rp->len = sizeof(*usb); | 
 | 		rp->bt = NULL; | 
 | 		rp->usb = usb; | 
 | 		rp->common = &usb->common; | 
 | 	} | 
 | } | 
 |  | 
 | static void dualshock4_output_worker(struct work_struct *work) | 
 | { | 
 | 	struct dualshock4 *ds4 = container_of(work, struct dualshock4, output_worker); | 
 | 	struct dualshock4_output_report report; | 
 | 	struct dualshock4_output_report_common *common; | 
 | 	unsigned long flags; | 
 |  | 
 | 	dualshock4_init_output_report(ds4, &report, ds4->output_report_dmabuf); | 
 | 	common = report.common; | 
 |  | 
 | 	spin_lock_irqsave(&ds4->base.lock, flags); | 
 |  | 
 | 	if (ds4->update_rumble) { | 
 | 		/* Select classic rumble style haptics and enable it. */ | 
 | 		common->valid_flag0 |= DS4_OUTPUT_VALID_FLAG0_MOTOR; | 
 | 		common->motor_left = ds4->motor_left; | 
 | 		common->motor_right = ds4->motor_right; | 
 | 		ds4->update_rumble = false; | 
 | 	} | 
 |  | 
 | 	if (ds4->update_lightbar) { | 
 | 		common->valid_flag0 |= DS4_OUTPUT_VALID_FLAG0_LED; | 
 | 		/* Comptabile behavior with hid-sony, which used a dummy global LED to | 
 | 		 * allow enabling/disabling the lightbar. The global LED maps to | 
 | 		 * lightbar_enabled. | 
 | 		 */ | 
 | 		common->lightbar_red = ds4->lightbar_enabled ? ds4->lightbar_red : 0; | 
 | 		common->lightbar_green = ds4->lightbar_enabled ? ds4->lightbar_green : 0; | 
 | 		common->lightbar_blue = ds4->lightbar_enabled ? ds4->lightbar_blue : 0; | 
 | 		ds4->update_lightbar = false; | 
 | 	} | 
 |  | 
 | 	if (ds4->update_lightbar_blink) { | 
 | 		common->valid_flag0 |= DS4_OUTPUT_VALID_FLAG0_LED_BLINK; | 
 | 		common->lightbar_blink_on = ds4->lightbar_blink_on; | 
 | 		common->lightbar_blink_off = ds4->lightbar_blink_off; | 
 | 		ds4->update_lightbar_blink = false; | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&ds4->base.lock, flags); | 
 |  | 
 | 	/* Bluetooth packets need additional flags as well as a CRC in the last 4 bytes. */ | 
 | 	if (report.bt) { | 
 | 		uint32_t crc; | 
 | 		uint8_t seed = PS_OUTPUT_CRC32_SEED; | 
 |  | 
 | 		/* Hardware control flags need to set to let the device know | 
 | 		 * there is HID data as well as CRC. | 
 | 		 */ | 
 | 		report.bt->hw_control = DS4_OUTPUT_HWCTL_HID | DS4_OUTPUT_HWCTL_CRC32; | 
 |  | 
 | 		if (ds4->update_bt_poll_interval) { | 
 | 			report.bt->hw_control |= ds4->bt_poll_interval; | 
 | 			ds4->update_bt_poll_interval = false; | 
 | 		} | 
 |  | 
 | 		crc = crc32_le(0xFFFFFFFF, &seed, 1); | 
 | 		crc = ~crc32_le(crc, report.data, report.len - 4); | 
 |  | 
 | 		report.bt->crc32 = cpu_to_le32(crc); | 
 | 	} | 
 |  | 
 | 	hid_hw_output_report(ds4->base.hdev, report.data, report.len); | 
 | } | 
 |  | 
 | static int dualshock4_parse_report(struct ps_device *ps_dev, struct hid_report *report, | 
 | 		u8 *data, int size) | 
 | { | 
 | 	struct hid_device *hdev = ps_dev->hdev; | 
 | 	struct dualshock4 *ds4 = container_of(ps_dev, struct dualshock4, base); | 
 | 	struct dualshock4_input_report_common *ds4_report; | 
 | 	struct dualshock4_touch_report *touch_reports; | 
 | 	uint8_t battery_capacity, num_touch_reports, value; | 
 | 	int battery_status, i, j; | 
 | 	uint16_t sensor_timestamp; | 
 | 	unsigned long flags; | 
 | 	bool is_minimal = false; | 
 |  | 
 | 	/* | 
 | 	 * DualShock4 in USB uses the full HID report for reportID 1, but | 
 | 	 * Bluetooth uses a minimal HID report for reportID 1 and reports | 
 | 	 * the full report using reportID 17. | 
 | 	 */ | 
 | 	if (hdev->bus == BUS_USB && report->id == DS4_INPUT_REPORT_USB && | 
 | 			size == DS4_INPUT_REPORT_USB_SIZE) { | 
 | 		struct dualshock4_input_report_usb *usb = (struct dualshock4_input_report_usb *)data; | 
 |  | 
 | 		ds4_report = &usb->common; | 
 | 		num_touch_reports = usb->num_touch_reports; | 
 | 		touch_reports = usb->touch_reports; | 
 | 	} else if (hdev->bus == BUS_BLUETOOTH && report->id == DS4_INPUT_REPORT_BT && | 
 | 			size == DS4_INPUT_REPORT_BT_SIZE) { | 
 | 		struct dualshock4_input_report_bt *bt = (struct dualshock4_input_report_bt *)data; | 
 | 		uint32_t report_crc = get_unaligned_le32(&bt->crc32); | 
 |  | 
 | 		/* Last 4 bytes of input report contains CRC. */ | 
 | 		if (!ps_check_crc32(PS_INPUT_CRC32_SEED, data, size - 4, report_crc)) { | 
 | 			hid_err(hdev, "DualShock4 input CRC's check failed\n"); | 
 | 			return -EILSEQ; | 
 | 		} | 
 |  | 
 | 		ds4_report = &bt->common; | 
 | 		num_touch_reports = bt->num_touch_reports; | 
 | 		touch_reports = bt->touch_reports; | 
 | 	} else if (hdev->bus == BUS_BLUETOOTH && | 
 | 		   report->id == DS4_INPUT_REPORT_BT_MINIMAL && | 
 | 			 size == DS4_INPUT_REPORT_BT_MINIMAL_SIZE) { | 
 | 		/* Some third-party pads never switch to the full 0x11 report. | 
 | 		 * The short 0x01 report is 10 bytes long: | 
 | 		 *   u8 report_id == 0x01 | 
 | 		 *   u8 first_bytes_of_full_report[9] | 
 | 		 * So let's reuse the full report parser, and stop it after | 
 | 		 * parsing the buttons. | 
 | 		 */ | 
 | 		ds4_report = (struct dualshock4_input_report_common *)&data[1]; | 
 | 		is_minimal = true; | 
 | 	} else { | 
 | 		hid_err(hdev, "Unhandled reportID=%d\n", report->id); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	input_report_abs(ds4->gamepad, ABS_X,  ds4_report->x); | 
 | 	input_report_abs(ds4->gamepad, ABS_Y,  ds4_report->y); | 
 | 	input_report_abs(ds4->gamepad, ABS_RX, ds4_report->rx); | 
 | 	input_report_abs(ds4->gamepad, ABS_RY, ds4_report->ry); | 
 | 	input_report_abs(ds4->gamepad, ABS_Z,  ds4_report->z); | 
 | 	input_report_abs(ds4->gamepad, ABS_RZ, ds4_report->rz); | 
 |  | 
 | 	value = ds4_report->buttons[0] & DS_BUTTONS0_HAT_SWITCH; | 
 | 	if (value >= ARRAY_SIZE(ps_gamepad_hat_mapping)) | 
 | 		value = 8; /* center */ | 
 | 	input_report_abs(ds4->gamepad, ABS_HAT0X, ps_gamepad_hat_mapping[value].x); | 
 | 	input_report_abs(ds4->gamepad, ABS_HAT0Y, ps_gamepad_hat_mapping[value].y); | 
 |  | 
 | 	input_report_key(ds4->gamepad, BTN_WEST,   ds4_report->buttons[0] & DS_BUTTONS0_SQUARE); | 
 | 	input_report_key(ds4->gamepad, BTN_SOUTH,  ds4_report->buttons[0] & DS_BUTTONS0_CROSS); | 
 | 	input_report_key(ds4->gamepad, BTN_EAST,   ds4_report->buttons[0] & DS_BUTTONS0_CIRCLE); | 
 | 	input_report_key(ds4->gamepad, BTN_NORTH,  ds4_report->buttons[0] & DS_BUTTONS0_TRIANGLE); | 
 | 	input_report_key(ds4->gamepad, BTN_TL,     ds4_report->buttons[1] & DS_BUTTONS1_L1); | 
 | 	input_report_key(ds4->gamepad, BTN_TR,     ds4_report->buttons[1] & DS_BUTTONS1_R1); | 
 | 	input_report_key(ds4->gamepad, BTN_TL2,    ds4_report->buttons[1] & DS_BUTTONS1_L2); | 
 | 	input_report_key(ds4->gamepad, BTN_TR2,    ds4_report->buttons[1] & DS_BUTTONS1_R2); | 
 | 	input_report_key(ds4->gamepad, BTN_SELECT, ds4_report->buttons[1] & DS_BUTTONS1_CREATE); | 
 | 	input_report_key(ds4->gamepad, BTN_START,  ds4_report->buttons[1] & DS_BUTTONS1_OPTIONS); | 
 | 	input_report_key(ds4->gamepad, BTN_THUMBL, ds4_report->buttons[1] & DS_BUTTONS1_L3); | 
 | 	input_report_key(ds4->gamepad, BTN_THUMBR, ds4_report->buttons[1] & DS_BUTTONS1_R3); | 
 | 	input_report_key(ds4->gamepad, BTN_MODE,   ds4_report->buttons[2] & DS_BUTTONS2_PS_HOME); | 
 | 	input_sync(ds4->gamepad); | 
 |  | 
 | 	if (is_minimal) | 
 | 		return 0; | 
 |  | 
 | 	/* Parse and calibrate gyroscope data. */ | 
 | 	for (i = 0; i < ARRAY_SIZE(ds4_report->gyro); i++) { | 
 | 		int raw_data = (short)le16_to_cpu(ds4_report->gyro[i]); | 
 | 		int calib_data = mult_frac(ds4->gyro_calib_data[i].sens_numer, | 
 | 					   raw_data, ds4->gyro_calib_data[i].sens_denom); | 
 |  | 
 | 		input_report_abs(ds4->sensors, ds4->gyro_calib_data[i].abs_code, calib_data); | 
 | 	} | 
 |  | 
 | 	/* Parse and calibrate accelerometer data. */ | 
 | 	for (i = 0; i < ARRAY_SIZE(ds4_report->accel); i++) { | 
 | 		int raw_data = (short)le16_to_cpu(ds4_report->accel[i]); | 
 | 		int calib_data = mult_frac(ds4->accel_calib_data[i].sens_numer, | 
 | 					   raw_data - ds4->accel_calib_data[i].bias, | 
 | 					   ds4->accel_calib_data[i].sens_denom); | 
 |  | 
 | 		input_report_abs(ds4->sensors, ds4->accel_calib_data[i].abs_code, calib_data); | 
 | 	} | 
 |  | 
 | 	/* Convert timestamp (in 5.33us unit) to timestamp_us */ | 
 | 	sensor_timestamp = le16_to_cpu(ds4_report->sensor_timestamp); | 
 | 	if (!ds4->sensor_timestamp_initialized) { | 
 | 		ds4->sensor_timestamp_us = DIV_ROUND_CLOSEST(sensor_timestamp*16, 3); | 
 | 		ds4->sensor_timestamp_initialized = true; | 
 | 	} else { | 
 | 		uint16_t delta; | 
 |  | 
 | 		if (ds4->prev_sensor_timestamp > sensor_timestamp) | 
 | 			delta = (U16_MAX - ds4->prev_sensor_timestamp + sensor_timestamp + 1); | 
 | 		else | 
 | 			delta = sensor_timestamp - ds4->prev_sensor_timestamp; | 
 | 		ds4->sensor_timestamp_us += DIV_ROUND_CLOSEST(delta*16, 3); | 
 | 	} | 
 | 	ds4->prev_sensor_timestamp = sensor_timestamp; | 
 | 	input_event(ds4->sensors, EV_MSC, MSC_TIMESTAMP, ds4->sensor_timestamp_us); | 
 | 	input_sync(ds4->sensors); | 
 |  | 
 | 	for (i = 0; i < num_touch_reports; i++) { | 
 | 		struct dualshock4_touch_report *touch_report = &touch_reports[i]; | 
 |  | 
 | 		for (j = 0; j < ARRAY_SIZE(touch_report->points); j++) { | 
 | 			struct dualshock4_touch_point *point = &touch_report->points[j]; | 
 | 			bool active = (point->contact & DS4_TOUCH_POINT_INACTIVE) ? false : true; | 
 |  | 
 | 			input_mt_slot(ds4->touchpad, j); | 
 | 			input_mt_report_slot_state(ds4->touchpad, MT_TOOL_FINGER, active); | 
 |  | 
 | 			if (active) { | 
 | 				int x = (point->x_hi << 8) | point->x_lo; | 
 | 				int y = (point->y_hi << 4) | point->y_lo; | 
 |  | 
 | 				input_report_abs(ds4->touchpad, ABS_MT_POSITION_X, x); | 
 | 				input_report_abs(ds4->touchpad, ABS_MT_POSITION_Y, y); | 
 | 			} | 
 | 		} | 
 | 		input_mt_sync_frame(ds4->touchpad); | 
 | 		input_sync(ds4->touchpad); | 
 | 	} | 
 | 	input_report_key(ds4->touchpad, BTN_LEFT, ds4_report->buttons[2] & DS_BUTTONS2_TOUCHPAD); | 
 |  | 
 | 	/* | 
 | 	 * Interpretation of the battery_capacity data depends on the cable state. | 
 | 	 * When no cable is connected (bit4 is 0): | 
 | 	 * - 0:10: percentage in units of 10%. | 
 | 	 * When a cable is plugged in: | 
 | 	 * - 0-10: percentage in units of 10%. | 
 | 	 * - 11: battery is full | 
 | 	 * - 14: not charging due to Voltage or temperature error | 
 | 	 * - 15: charge error | 
 | 	 */ | 
 | 	if (ds4_report->status[0] & DS4_STATUS0_CABLE_STATE) { | 
 | 		uint8_t battery_data = ds4_report->status[0] & DS4_STATUS0_BATTERY_CAPACITY; | 
 |  | 
 | 		if (battery_data < 10) { | 
 | 			/* Take the mid-point for each battery capacity value, | 
 | 			 * because on the hardware side 0 = 0-9%, 1=10-19%, etc. | 
 | 			 * This matches official platform behavior, which does | 
 | 			 * the same. | 
 | 			 */ | 
 | 			battery_capacity = battery_data * 10 + 5; | 
 | 			battery_status = POWER_SUPPLY_STATUS_CHARGING; | 
 | 		} else if (battery_data == 10) { | 
 | 			battery_capacity = 100; | 
 | 			battery_status = POWER_SUPPLY_STATUS_CHARGING; | 
 | 		} else if (battery_data == DS4_BATTERY_STATUS_FULL) { | 
 | 			battery_capacity = 100; | 
 | 			battery_status = POWER_SUPPLY_STATUS_FULL; | 
 | 		} else { /* 14, 15 and undefined values */ | 
 | 			battery_capacity = 0; | 
 | 			battery_status = POWER_SUPPLY_STATUS_UNKNOWN; | 
 | 		} | 
 | 	} else { | 
 | 		uint8_t battery_data = ds4_report->status[0] & DS4_STATUS0_BATTERY_CAPACITY; | 
 |  | 
 | 		if (battery_data < 10) | 
 | 			battery_capacity = battery_data * 10 + 5; | 
 | 		else /* 10 */ | 
 | 			battery_capacity = 100; | 
 |  | 
 | 		battery_status = POWER_SUPPLY_STATUS_DISCHARGING; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&ps_dev->lock, flags); | 
 | 	ps_dev->battery_capacity = battery_capacity; | 
 | 	ps_dev->battery_status = battery_status; | 
 | 	spin_unlock_irqrestore(&ps_dev->lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dualshock4_dongle_parse_report(struct ps_device *ps_dev, struct hid_report *report, | 
 | 		u8 *data, int size) | 
 | { | 
 | 	struct dualshock4 *ds4 = container_of(ps_dev, struct dualshock4, base); | 
 | 	bool connected = false; | 
 |  | 
 | 	/* The dongle reports data using the main USB report (0x1) no matter whether a controller | 
 | 	 * is connected with mostly zeros. The report does contain dongle status, which we use to | 
 | 	 * determine if a controller is connected and if so we forward to the regular DualShock4 | 
 | 	 * parsing code. | 
 | 	 */ | 
 | 	if (data[0] == DS4_INPUT_REPORT_USB && size == DS4_INPUT_REPORT_USB_SIZE) { | 
 | 		struct dualshock4_input_report_common *ds4_report = (struct dualshock4_input_report_common *)&data[1]; | 
 | 		unsigned long flags; | 
 |  | 
 | 		connected = ds4_report->status[1] & DS4_STATUS1_DONGLE_STATE ? false : true; | 
 |  | 
 | 		if (ds4->dongle_state == DONGLE_DISCONNECTED && connected) { | 
 | 			hid_info(ps_dev->hdev, "DualShock 4 USB dongle: controller connected\n"); | 
 |  | 
 | 			dualshock4_set_default_lightbar_colors(ds4); | 
 |  | 
 | 			spin_lock_irqsave(&ps_dev->lock, flags); | 
 | 			ds4->dongle_state = DONGLE_CALIBRATING; | 
 | 			spin_unlock_irqrestore(&ps_dev->lock, flags); | 
 |  | 
 | 			schedule_work(&ds4->dongle_hotplug_worker); | 
 |  | 
 | 			/* Don't process the report since we don't have | 
 | 			 * calibration data, but let hidraw have it anyway. | 
 | 			 */ | 
 | 			return 0; | 
 | 		} else if ((ds4->dongle_state == DONGLE_CONNECTED || | 
 | 			    ds4->dongle_state == DONGLE_DISABLED) && !connected) { | 
 | 			hid_info(ps_dev->hdev, "DualShock 4 USB dongle: controller disconnected\n"); | 
 |  | 
 | 			spin_lock_irqsave(&ps_dev->lock, flags); | 
 | 			ds4->dongle_state = DONGLE_DISCONNECTED; | 
 | 			spin_unlock_irqrestore(&ps_dev->lock, flags); | 
 |  | 
 | 			/* Return 0, so hidraw can get the report. */ | 
 | 			return 0; | 
 | 		} else if (ds4->dongle_state == DONGLE_CALIBRATING || | 
 | 			   ds4->dongle_state == DONGLE_DISABLED || | 
 | 			   ds4->dongle_state == DONGLE_DISCONNECTED) { | 
 | 			/* Return 0, so hidraw can get the report. */ | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (connected) | 
 | 		return dualshock4_parse_report(ps_dev, report, data, size); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dualshock4_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect) | 
 | { | 
 | 	struct hid_device *hdev = input_get_drvdata(dev); | 
 | 	struct dualshock4 *ds4 = hid_get_drvdata(hdev); | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (effect->type != FF_RUMBLE) | 
 | 		return 0; | 
 |  | 
 | 	spin_lock_irqsave(&ds4->base.lock, flags); | 
 | 	ds4->update_rumble = true; | 
 | 	ds4->motor_left = effect->u.rumble.strong_magnitude / 256; | 
 | 	ds4->motor_right = effect->u.rumble.weak_magnitude / 256; | 
 | 	spin_unlock_irqrestore(&ds4->base.lock, flags); | 
 |  | 
 | 	dualshock4_schedule_work(ds4); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void dualshock4_remove(struct ps_device *ps_dev) | 
 | { | 
 | 	struct dualshock4 *ds4 = container_of(ps_dev, struct dualshock4, base); | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&ds4->base.lock, flags); | 
 | 	ds4->output_worker_initialized = false; | 
 | 	spin_unlock_irqrestore(&ds4->base.lock, flags); | 
 |  | 
 | 	cancel_work_sync(&ds4->output_worker); | 
 |  | 
 | 	if (ps_dev->hdev->product == USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE) | 
 | 		cancel_work_sync(&ds4->dongle_hotplug_worker); | 
 | } | 
 |  | 
 | static inline void dualshock4_schedule_work(struct dualshock4 *ds4) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&ds4->base.lock, flags); | 
 | 	if (ds4->output_worker_initialized) | 
 | 		schedule_work(&ds4->output_worker); | 
 | 	spin_unlock_irqrestore(&ds4->base.lock, flags); | 
 | } | 
 |  | 
 | static void dualshock4_set_bt_poll_interval(struct dualshock4 *ds4, uint8_t interval) | 
 | { | 
 | 	ds4->bt_poll_interval = interval; | 
 | 	ds4->update_bt_poll_interval = true; | 
 | 	dualshock4_schedule_work(ds4); | 
 | } | 
 |  | 
 | /* Set default lightbar color based on player. */ | 
 | static void dualshock4_set_default_lightbar_colors(struct dualshock4 *ds4) | 
 | { | 
 | 	/* Use same player colors as PlayStation 4. | 
 | 	 * Array of colors is in RGB. | 
 | 	 */ | 
 | 	static const int player_colors[4][3] = { | 
 | 		{ 0x00, 0x00, 0x40 }, /* Blue */ | 
 | 		{ 0x40, 0x00, 0x00 }, /* Red */ | 
 | 		{ 0x00, 0x40, 0x00 }, /* Green */ | 
 | 		{ 0x20, 0x00, 0x20 }  /* Pink */ | 
 | 	}; | 
 |  | 
 | 	uint8_t player_id = ds4->base.player_id % ARRAY_SIZE(player_colors); | 
 |  | 
 | 	ds4->lightbar_enabled = true; | 
 | 	ds4->lightbar_red = player_colors[player_id][0]; | 
 | 	ds4->lightbar_green = player_colors[player_id][1]; | 
 | 	ds4->lightbar_blue = player_colors[player_id][2]; | 
 |  | 
 | 	ds4->update_lightbar = true; | 
 | 	dualshock4_schedule_work(ds4); | 
 | } | 
 |  | 
 | static struct ps_device *dualshock4_create(struct hid_device *hdev) | 
 | { | 
 | 	struct dualshock4 *ds4; | 
 | 	struct ps_device *ps_dev; | 
 | 	uint8_t max_output_report_size; | 
 | 	int i, ret; | 
 |  | 
 | 	/* The DualShock4 has an RGB lightbar, which the original hid-sony driver | 
 | 	 * exposed as a set of 4 LEDs for the 3 color channels and a global control. | 
 | 	 * Ideally this should have used the multi-color LED class, which didn't exist | 
 | 	 * yet. In addition the driver used a naming scheme not compliant with the LED | 
 | 	 * naming spec by using "<mac_address>:<color>", which contained many colons. | 
 | 	 * We use a more compliant by using "<device_name>:<color>" name now. Ideally | 
 | 	 * would have been "<device_name>:<color>:indicator", but that would break | 
 | 	 * existing applications (e.g. Android). Nothing matches against MAC address. | 
 | 	 */ | 
 | 	static const struct ps_led_info lightbar_leds_info[] = { | 
 | 		{ NULL, "red", 255, dualshock4_led_get_brightness, dualshock4_led_set_brightness }, | 
 | 		{ NULL, "green", 255, dualshock4_led_get_brightness, dualshock4_led_set_brightness }, | 
 | 		{ NULL, "blue", 255, dualshock4_led_get_brightness, dualshock4_led_set_brightness }, | 
 | 		{ NULL, "global", 1, dualshock4_led_get_brightness, dualshock4_led_set_brightness, | 
 | 				dualshock4_led_set_blink }, | 
 | 	}; | 
 |  | 
 | 	ds4 = devm_kzalloc(&hdev->dev, sizeof(*ds4), GFP_KERNEL); | 
 | 	if (!ds4) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	/* | 
 | 	 * Patch version to allow userspace to distinguish between | 
 | 	 * hid-generic vs hid-playstation axis and button mapping. | 
 | 	 */ | 
 | 	hdev->version |= HID_PLAYSTATION_VERSION_PATCH; | 
 |  | 
 | 	ps_dev = &ds4->base; | 
 | 	ps_dev->hdev = hdev; | 
 | 	spin_lock_init(&ps_dev->lock); | 
 | 	ps_dev->battery_capacity = 100; /* initial value until parse_report. */ | 
 | 	ps_dev->battery_status = POWER_SUPPLY_STATUS_UNKNOWN; | 
 | 	ps_dev->parse_report = dualshock4_parse_report; | 
 | 	ps_dev->remove = dualshock4_remove; | 
 | 	INIT_WORK(&ds4->output_worker, dualshock4_output_worker); | 
 | 	ds4->output_worker_initialized = true; | 
 | 	hid_set_drvdata(hdev, ds4); | 
 |  | 
 | 	max_output_report_size = sizeof(struct dualshock4_output_report_bt); | 
 | 	ds4->output_report_dmabuf = devm_kzalloc(&hdev->dev, max_output_report_size, GFP_KERNEL); | 
 | 	if (!ds4->output_report_dmabuf) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	if (hdev->product == USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE) { | 
 | 		ds4->dongle_state = DONGLE_DISCONNECTED; | 
 | 		INIT_WORK(&ds4->dongle_hotplug_worker, dualshock4_dongle_calibration_work); | 
 |  | 
 | 		/* Override parse report for dongle specific hotplug handling. */ | 
 | 		ps_dev->parse_report = dualshock4_dongle_parse_report; | 
 | 	} | 
 |  | 
 | 	ret = dualshock4_get_mac_address(ds4); | 
 | 	if (ret) { | 
 | 		hid_err(hdev, "Failed to get MAC address from DualShock4\n"); | 
 | 		return ERR_PTR(ret); | 
 | 	} | 
 | 	snprintf(hdev->uniq, sizeof(hdev->uniq), "%pMR", ds4->base.mac_address); | 
 |  | 
 | 	ret = dualshock4_get_firmware_info(ds4); | 
 | 	if (ret) { | 
 | 		hid_warn(hdev, "Failed to get firmware info from DualShock4\n"); | 
 | 		hid_warn(hdev, "HW/FW version data in sysfs will be invalid.\n"); | 
 | 	} | 
 |  | 
 | 	ret = ps_devices_list_add(ps_dev); | 
 | 	if (ret) | 
 | 		return ERR_PTR(ret); | 
 |  | 
 | 	ret = dualshock4_get_calibration_data(ds4); | 
 | 	if (ret) { | 
 | 		hid_warn(hdev, "Failed to get calibration data from DualShock4\n"); | 
 | 		hid_warn(hdev, "Gyroscope and accelerometer will be inaccurate.\n"); | 
 | 	} | 
 |  | 
 | 	ds4->gamepad = ps_gamepad_create(hdev, dualshock4_play_effect); | 
 | 	if (IS_ERR(ds4->gamepad)) { | 
 | 		ret = PTR_ERR(ds4->gamepad); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* Use gamepad input device name as primary device name for e.g. LEDs */ | 
 | 	ps_dev->input_dev_name = dev_name(&ds4->gamepad->dev); | 
 |  | 
 | 	ds4->sensors = ps_sensors_create(hdev, DS4_ACC_RANGE, DS4_ACC_RES_PER_G, | 
 | 			DS4_GYRO_RANGE, DS4_GYRO_RES_PER_DEG_S); | 
 | 	if (IS_ERR(ds4->sensors)) { | 
 | 		ret = PTR_ERR(ds4->sensors); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	ds4->touchpad = ps_touchpad_create(hdev, DS4_TOUCHPAD_WIDTH, DS4_TOUCHPAD_HEIGHT, 2); | 
 | 	if (IS_ERR(ds4->touchpad)) { | 
 | 		ret = PTR_ERR(ds4->touchpad); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	ret = ps_device_register_battery(ps_dev); | 
 | 	if (ret) | 
 | 		goto err; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(lightbar_leds_info); i++) { | 
 | 		const struct ps_led_info *led_info = &lightbar_leds_info[i]; | 
 |  | 
 | 		ret = ps_led_register(ps_dev, &ds4->lightbar_leds[i], led_info); | 
 | 		if (ret < 0) | 
 | 			goto err; | 
 | 	} | 
 |  | 
 | 	dualshock4_set_bt_poll_interval(ds4, DS4_BT_DEFAULT_POLL_INTERVAL_MS); | 
 |  | 
 | 	ret = ps_device_set_player_id(ps_dev); | 
 | 	if (ret) { | 
 | 		hid_err(hdev, "Failed to assign player id for DualShock4: %d\n", ret); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	dualshock4_set_default_lightbar_colors(ds4); | 
 |  | 
 | 	/* | 
 | 	 * Reporting hardware and firmware is important as there are frequent updates, which | 
 | 	 * can change behavior. | 
 | 	 */ | 
 | 	hid_info(hdev, "Registered DualShock4 controller hw_version=0x%08x fw_version=0x%08x\n", | 
 | 			ds4->base.hw_version, ds4->base.fw_version); | 
 | 	return &ds4->base; | 
 |  | 
 | err: | 
 | 	ps_devices_list_remove(ps_dev); | 
 | 	return ERR_PTR(ret); | 
 | } | 
 |  | 
 | static int ps_raw_event(struct hid_device *hdev, struct hid_report *report, | 
 | 		u8 *data, int size) | 
 | { | 
 | 	struct ps_device *dev = hid_get_drvdata(hdev); | 
 |  | 
 | 	if (dev && dev->parse_report) | 
 | 		return dev->parse_report(dev, report, data, size); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ps_probe(struct hid_device *hdev, const struct hid_device_id *id) | 
 | { | 
 | 	struct ps_device *dev; | 
 | 	int ret; | 
 |  | 
 | 	ret = hid_parse(hdev); | 
 | 	if (ret) { | 
 | 		hid_err(hdev, "Parse failed\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); | 
 | 	if (ret) { | 
 | 		hid_err(hdev, "Failed to start HID device\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = hid_hw_open(hdev); | 
 | 	if (ret) { | 
 | 		hid_err(hdev, "Failed to open HID device\n"); | 
 | 		goto err_stop; | 
 | 	} | 
 |  | 
 | 	if (id->driver_data == PS_TYPE_PS4_DUALSHOCK4) { | 
 | 		dev = dualshock4_create(hdev); | 
 | 		if (IS_ERR(dev)) { | 
 | 			hid_err(hdev, "Failed to create dualshock4.\n"); | 
 | 			ret = PTR_ERR(dev); | 
 | 			goto err_close; | 
 | 		} | 
 | 	} else if (id->driver_data == PS_TYPE_PS5_DUALSENSE) { | 
 | 		dev = dualsense_create(hdev); | 
 | 		if (IS_ERR(dev)) { | 
 | 			hid_err(hdev, "Failed to create dualsense.\n"); | 
 | 			ret = PTR_ERR(dev); | 
 | 			goto err_close; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return ret; | 
 |  | 
 | err_close: | 
 | 	hid_hw_close(hdev); | 
 | err_stop: | 
 | 	hid_hw_stop(hdev); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void ps_remove(struct hid_device *hdev) | 
 | { | 
 | 	struct ps_device *dev = hid_get_drvdata(hdev); | 
 |  | 
 | 	ps_devices_list_remove(dev); | 
 | 	ps_device_release_player_id(dev); | 
 |  | 
 | 	if (dev->remove) | 
 | 		dev->remove(dev); | 
 |  | 
 | 	hid_hw_close(hdev); | 
 | 	hid_hw_stop(hdev); | 
 | } | 
 |  | 
 | static const struct hid_device_id ps_devices[] = { | 
 | 	/* Sony DualShock 4 controllers for PS4 */ | 
 | 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER), | 
 | 		.driver_data = PS_TYPE_PS4_DUALSHOCK4 }, | 
 | 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER), | 
 | 		.driver_data = PS_TYPE_PS4_DUALSHOCK4 }, | 
 | 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2), | 
 | 		.driver_data = PS_TYPE_PS4_DUALSHOCK4 }, | 
 | 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2), | 
 | 		.driver_data = PS_TYPE_PS4_DUALSHOCK4 }, | 
 | 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE), | 
 | 		.driver_data = PS_TYPE_PS4_DUALSHOCK4 }, | 
 |  | 
 | 	/* Sony DualSense controllers for PS5 */ | 
 | 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER), | 
 | 		.driver_data = PS_TYPE_PS5_DUALSENSE }, | 
 | 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER), | 
 | 		.driver_data = PS_TYPE_PS5_DUALSENSE }, | 
 | 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER_2), | 
 | 		.driver_data = PS_TYPE_PS5_DUALSENSE }, | 
 | 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER_2), | 
 | 		.driver_data = PS_TYPE_PS5_DUALSENSE }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(hid, ps_devices); | 
 |  | 
 | static struct hid_driver ps_driver = { | 
 | 	.name		= "playstation", | 
 | 	.id_table	= ps_devices, | 
 | 	.probe		= ps_probe, | 
 | 	.remove		= ps_remove, | 
 | 	.raw_event	= ps_raw_event, | 
 | 	.driver = { | 
 | 		.dev_groups = ps_device_groups, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init ps_init(void) | 
 | { | 
 | 	return hid_register_driver(&ps_driver); | 
 | } | 
 |  | 
 | static void __exit ps_exit(void) | 
 | { | 
 | 	hid_unregister_driver(&ps_driver); | 
 | 	ida_destroy(&ps_player_id_allocator); | 
 | } | 
 |  | 
 | module_init(ps_init); | 
 | module_exit(ps_exit); | 
 |  | 
 | MODULE_AUTHOR("Sony Interactive Entertainment"); | 
 | MODULE_DESCRIPTION("HID Driver for PlayStation peripherals."); | 
 | MODULE_LICENSE("GPL"); |