|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Driver for the Diolan DLN-2 USB-ADC adapter | 
|  | * | 
|  | * Copyright (c) 2017 Jack Andersen | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/mfd/dln2.h> | 
|  |  | 
|  | #include <linux/iio/iio.h> | 
|  | #include <linux/iio/sysfs.h> | 
|  | #include <linux/iio/trigger.h> | 
|  | #include <linux/iio/trigger_consumer.h> | 
|  | #include <linux/iio/triggered_buffer.h> | 
|  | #include <linux/iio/buffer.h> | 
|  | #include <linux/iio/kfifo_buf.h> | 
|  |  | 
|  | #define DLN2_ADC_MOD_NAME "dln2-adc" | 
|  |  | 
|  | #define DLN2_ADC_ID             0x06 | 
|  |  | 
|  | #define DLN2_ADC_GET_CHANNEL_COUNT	DLN2_CMD(0x01, DLN2_ADC_ID) | 
|  | #define DLN2_ADC_ENABLE			DLN2_CMD(0x02, DLN2_ADC_ID) | 
|  | #define DLN2_ADC_DISABLE		DLN2_CMD(0x03, DLN2_ADC_ID) | 
|  | #define DLN2_ADC_CHANNEL_ENABLE		DLN2_CMD(0x05, DLN2_ADC_ID) | 
|  | #define DLN2_ADC_CHANNEL_DISABLE	DLN2_CMD(0x06, DLN2_ADC_ID) | 
|  | #define DLN2_ADC_SET_RESOLUTION		DLN2_CMD(0x08, DLN2_ADC_ID) | 
|  | #define DLN2_ADC_CHANNEL_GET_VAL	DLN2_CMD(0x0A, DLN2_ADC_ID) | 
|  | #define DLN2_ADC_CHANNEL_GET_ALL_VAL	DLN2_CMD(0x0B, DLN2_ADC_ID) | 
|  | #define DLN2_ADC_CHANNEL_SET_CFG	DLN2_CMD(0x0C, DLN2_ADC_ID) | 
|  | #define DLN2_ADC_CHANNEL_GET_CFG	DLN2_CMD(0x0D, DLN2_ADC_ID) | 
|  | #define DLN2_ADC_CONDITION_MET_EV	DLN2_CMD(0x10, DLN2_ADC_ID) | 
|  |  | 
|  | #define DLN2_ADC_EVENT_NONE		0 | 
|  | #define DLN2_ADC_EVENT_BELOW		1 | 
|  | #define DLN2_ADC_EVENT_LEVEL_ABOVE	2 | 
|  | #define DLN2_ADC_EVENT_OUTSIDE		3 | 
|  | #define DLN2_ADC_EVENT_INSIDE		4 | 
|  | #define DLN2_ADC_EVENT_ALWAYS		5 | 
|  |  | 
|  | #define DLN2_ADC_MAX_CHANNELS 8 | 
|  | #define DLN2_ADC_DATA_BITS 10 | 
|  |  | 
|  | /* | 
|  | * Plays similar role to iio_demux_table in subsystem core; except allocated | 
|  | * in a fixed 8-element array. | 
|  | */ | 
|  | struct dln2_adc_demux_table { | 
|  | unsigned int from; | 
|  | unsigned int to; | 
|  | unsigned int length; | 
|  | }; | 
|  |  | 
|  | struct dln2_adc { | 
|  | struct platform_device *pdev; | 
|  | struct iio_chan_spec iio_channels[DLN2_ADC_MAX_CHANNELS + 1]; | 
|  | int port, trigger_chan; | 
|  | struct iio_trigger *trig; | 
|  | struct mutex mutex; | 
|  | /* Cached sample period in milliseconds */ | 
|  | unsigned int sample_period; | 
|  | /* Demux table */ | 
|  | unsigned int demux_count; | 
|  | struct dln2_adc_demux_table demux[DLN2_ADC_MAX_CHANNELS]; | 
|  | /* Precomputed timestamp padding offset and length */ | 
|  | unsigned int ts_pad_offset, ts_pad_length; | 
|  | }; | 
|  |  | 
|  | struct dln2_adc_port_chan { | 
|  | u8 port; | 
|  | u8 chan; | 
|  | }; | 
|  |  | 
|  | struct dln2_adc_get_all_vals { | 
|  | __le16 channel_mask; | 
|  | __le16 values[DLN2_ADC_MAX_CHANNELS]; | 
|  | }; | 
|  |  | 
|  | static void dln2_adc_add_demux(struct dln2_adc *dln2, | 
|  | unsigned int in_loc, unsigned int out_loc, | 
|  | unsigned int length) | 
|  | { | 
|  | struct dln2_adc_demux_table *p = dln2->demux_count ? | 
|  | &dln2->demux[dln2->demux_count - 1] : NULL; | 
|  |  | 
|  | if (p && p->from + p->length == in_loc && | 
|  | p->to + p->length == out_loc) { | 
|  | p->length += length; | 
|  | } else if (dln2->demux_count < DLN2_ADC_MAX_CHANNELS) { | 
|  | p = &dln2->demux[dln2->demux_count++]; | 
|  | p->from = in_loc; | 
|  | p->to = out_loc; | 
|  | p->length = length; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void dln2_adc_update_demux(struct dln2_adc *dln2) | 
|  | { | 
|  | int in_ind = -1, out_ind; | 
|  | unsigned int in_loc = 0, out_loc = 0; | 
|  | struct iio_dev *indio_dev = platform_get_drvdata(dln2->pdev); | 
|  |  | 
|  | /* Clear out any old demux */ | 
|  | dln2->demux_count = 0; | 
|  |  | 
|  | /* Optimize all 8-channels case */ | 
|  | if (indio_dev->masklength && | 
|  | (*indio_dev->active_scan_mask & 0xff) == 0xff) { | 
|  | dln2_adc_add_demux(dln2, 0, 0, 16); | 
|  | dln2->ts_pad_offset = 0; | 
|  | dln2->ts_pad_length = 0; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Build demux table from fixed 8-channels to active_scan_mask */ | 
|  | for_each_set_bit(out_ind, | 
|  | indio_dev->active_scan_mask, | 
|  | indio_dev->masklength) { | 
|  | /* Handle timestamp separately */ | 
|  | if (out_ind == DLN2_ADC_MAX_CHANNELS) | 
|  | break; | 
|  | for (++in_ind; in_ind != out_ind; ++in_ind) | 
|  | in_loc += 2; | 
|  | dln2_adc_add_demux(dln2, in_loc, out_loc, 2); | 
|  | out_loc += 2; | 
|  | in_loc += 2; | 
|  | } | 
|  |  | 
|  | if (indio_dev->scan_timestamp) { | 
|  | size_t ts_offset = indio_dev->scan_bytes / sizeof(int64_t) - 1; | 
|  |  | 
|  | dln2->ts_pad_offset = out_loc; | 
|  | dln2->ts_pad_length = ts_offset * sizeof(int64_t) - out_loc; | 
|  | } else { | 
|  | dln2->ts_pad_offset = 0; | 
|  | dln2->ts_pad_length = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int dln2_adc_get_chan_count(struct dln2_adc *dln2) | 
|  | { | 
|  | int ret; | 
|  | u8 port = dln2->port; | 
|  | u8 count; | 
|  | int olen = sizeof(count); | 
|  |  | 
|  | ret = dln2_transfer(dln2->pdev, DLN2_ADC_GET_CHANNEL_COUNT, | 
|  | &port, sizeof(port), &count, &olen); | 
|  | if (ret < 0) { | 
|  | dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); | 
|  | return ret; | 
|  | } | 
|  | if (olen < sizeof(count)) | 
|  | return -EPROTO; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static int dln2_adc_set_port_resolution(struct dln2_adc *dln2) | 
|  | { | 
|  | int ret; | 
|  | struct dln2_adc_port_chan port_chan = { | 
|  | .port = dln2->port, | 
|  | .chan = DLN2_ADC_DATA_BITS, | 
|  | }; | 
|  |  | 
|  | ret = dln2_transfer_tx(dln2->pdev, DLN2_ADC_SET_RESOLUTION, | 
|  | &port_chan, sizeof(port_chan)); | 
|  | if (ret < 0) | 
|  | dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int dln2_adc_set_chan_enabled(struct dln2_adc *dln2, | 
|  | int channel, bool enable) | 
|  | { | 
|  | int ret; | 
|  | struct dln2_adc_port_chan port_chan = { | 
|  | .port = dln2->port, | 
|  | .chan = channel, | 
|  | }; | 
|  | u16 cmd = enable ? DLN2_ADC_CHANNEL_ENABLE : DLN2_ADC_CHANNEL_DISABLE; | 
|  |  | 
|  | ret = dln2_transfer_tx(dln2->pdev, cmd, &port_chan, sizeof(port_chan)); | 
|  | if (ret < 0) | 
|  | dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int dln2_adc_set_port_enabled(struct dln2_adc *dln2, bool enable, | 
|  | u16 *conflict_out) | 
|  | { | 
|  | int ret; | 
|  | u8 port = dln2->port; | 
|  | __le16 conflict; | 
|  | int olen = sizeof(conflict); | 
|  | u16 cmd = enable ? DLN2_ADC_ENABLE : DLN2_ADC_DISABLE; | 
|  |  | 
|  | if (conflict_out) | 
|  | *conflict_out = 0; | 
|  |  | 
|  | ret = dln2_transfer(dln2->pdev, cmd, &port, sizeof(port), | 
|  | &conflict, &olen); | 
|  | if (ret < 0) { | 
|  | dev_dbg(&dln2->pdev->dev, "Problem in %s(%d)\n", | 
|  | __func__, (int)enable); | 
|  | if (conflict_out && enable && olen >= sizeof(conflict)) | 
|  | *conflict_out = le16_to_cpu(conflict); | 
|  | return ret; | 
|  | } | 
|  | if (enable && olen < sizeof(conflict)) | 
|  | return -EPROTO; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int dln2_adc_set_chan_period(struct dln2_adc *dln2, | 
|  | unsigned int channel, unsigned int period) | 
|  | { | 
|  | int ret; | 
|  | struct { | 
|  | struct dln2_adc_port_chan port_chan; | 
|  | __u8 type; | 
|  | __le16 period; | 
|  | __le16 low; | 
|  | __le16 high; | 
|  | } __packed set_cfg = { | 
|  | .port_chan.port = dln2->port, | 
|  | .port_chan.chan = channel, | 
|  | .type = period ? DLN2_ADC_EVENT_ALWAYS : DLN2_ADC_EVENT_NONE, | 
|  | .period = cpu_to_le16(period) | 
|  | }; | 
|  |  | 
|  | ret = dln2_transfer_tx(dln2->pdev, DLN2_ADC_CHANNEL_SET_CFG, | 
|  | &set_cfg, sizeof(set_cfg)); | 
|  | if (ret < 0) | 
|  | dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int dln2_adc_read(struct dln2_adc *dln2, unsigned int channel) | 
|  | { | 
|  | int ret, i; | 
|  | u16 conflict; | 
|  | __le16 value; | 
|  | int olen = sizeof(value); | 
|  | struct dln2_adc_port_chan port_chan = { | 
|  | .port = dln2->port, | 
|  | .chan = channel, | 
|  | }; | 
|  |  | 
|  | ret = dln2_adc_set_chan_enabled(dln2, channel, true); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = dln2_adc_set_port_enabled(dln2, true, &conflict); | 
|  | if (ret < 0) { | 
|  | if (conflict) { | 
|  | dev_err(&dln2->pdev->dev, | 
|  | "ADC pins conflict with mask %04X\n", | 
|  | (int)conflict); | 
|  | ret = -EBUSY; | 
|  | } | 
|  | goto disable_chan; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Call GET_VAL twice due to initial zero-return immediately after | 
|  | * enabling channel. | 
|  | */ | 
|  | for (i = 0; i < 2; ++i) { | 
|  | ret = dln2_transfer(dln2->pdev, DLN2_ADC_CHANNEL_GET_VAL, | 
|  | &port_chan, sizeof(port_chan), | 
|  | &value, &olen); | 
|  | if (ret < 0) { | 
|  | dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); | 
|  | goto disable_port; | 
|  | } | 
|  | if (olen < sizeof(value)) { | 
|  | ret = -EPROTO; | 
|  | goto disable_port; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = le16_to_cpu(value); | 
|  |  | 
|  | disable_port: | 
|  | dln2_adc_set_port_enabled(dln2, false, NULL); | 
|  | disable_chan: | 
|  | dln2_adc_set_chan_enabled(dln2, channel, false); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int dln2_adc_read_all(struct dln2_adc *dln2, | 
|  | struct dln2_adc_get_all_vals *get_all_vals) | 
|  | { | 
|  | int ret; | 
|  | __u8 port = dln2->port; | 
|  | int olen = sizeof(*get_all_vals); | 
|  |  | 
|  | ret = dln2_transfer(dln2->pdev, DLN2_ADC_CHANNEL_GET_ALL_VAL, | 
|  | &port, sizeof(port), get_all_vals, &olen); | 
|  | if (ret < 0) { | 
|  | dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); | 
|  | return ret; | 
|  | } | 
|  | if (olen < sizeof(*get_all_vals)) | 
|  | return -EPROTO; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int dln2_adc_read_raw(struct iio_dev *indio_dev, | 
|  | struct iio_chan_spec const *chan, | 
|  | int *val, | 
|  | int *val2, | 
|  | long mask) | 
|  | { | 
|  | int ret; | 
|  | unsigned int microhertz; | 
|  | struct dln2_adc *dln2 = iio_priv(indio_dev); | 
|  |  | 
|  | switch (mask) { | 
|  | case IIO_CHAN_INFO_RAW: | 
|  | ret = iio_device_claim_direct_mode(indio_dev); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | mutex_lock(&dln2->mutex); | 
|  | ret = dln2_adc_read(dln2, chan->channel); | 
|  | mutex_unlock(&dln2->mutex); | 
|  |  | 
|  | iio_device_release_direct_mode(indio_dev); | 
|  |  | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | *val = ret; | 
|  | return IIO_VAL_INT; | 
|  |  | 
|  | case IIO_CHAN_INFO_SCALE: | 
|  | /* | 
|  | * Voltage reference is fixed at 3.3v | 
|  | *  3.3 / (1 << 10) * 1000000000 | 
|  | */ | 
|  | *val = 0; | 
|  | *val2 = 3222656; | 
|  | return IIO_VAL_INT_PLUS_NANO; | 
|  |  | 
|  | case IIO_CHAN_INFO_SAMP_FREQ: | 
|  | if (dln2->sample_period) { | 
|  | microhertz = 1000000000 / dln2->sample_period; | 
|  | *val = microhertz / 1000000; | 
|  | *val2 = microhertz % 1000000; | 
|  | } else { | 
|  | *val = 0; | 
|  | *val2 = 0; | 
|  | } | 
|  |  | 
|  | return IIO_VAL_INT_PLUS_MICRO; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int dln2_adc_write_raw(struct iio_dev *indio_dev, | 
|  | struct iio_chan_spec const *chan, | 
|  | int val, | 
|  | int val2, | 
|  | long mask) | 
|  | { | 
|  | int ret; | 
|  | unsigned int microhertz; | 
|  | struct dln2_adc *dln2 = iio_priv(indio_dev); | 
|  |  | 
|  | switch (mask) { | 
|  | case IIO_CHAN_INFO_SAMP_FREQ: | 
|  | microhertz = 1000000 * val + val2; | 
|  |  | 
|  | mutex_lock(&dln2->mutex); | 
|  |  | 
|  | dln2->sample_period = | 
|  | microhertz ? 1000000000 / microhertz : UINT_MAX; | 
|  | if (dln2->sample_period > 65535) { | 
|  | dln2->sample_period = 65535; | 
|  | dev_warn(&dln2->pdev->dev, | 
|  | "clamping period to 65535ms\n"); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The first requested channel is arbitrated as a shared | 
|  | * trigger source, so only one event is registered with the | 
|  | * DLN. The event handler will then read all enabled channel | 
|  | * values using DLN2_ADC_CHANNEL_GET_ALL_VAL to maintain | 
|  | * synchronization between ADC readings. | 
|  | */ | 
|  | if (dln2->trigger_chan != -1) | 
|  | ret = dln2_adc_set_chan_period(dln2, | 
|  | dln2->trigger_chan, dln2->sample_period); | 
|  | else | 
|  | ret = 0; | 
|  |  | 
|  | mutex_unlock(&dln2->mutex); | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int dln2_update_scan_mode(struct iio_dev *indio_dev, | 
|  | const unsigned long *scan_mask) | 
|  | { | 
|  | struct dln2_adc *dln2 = iio_priv(indio_dev); | 
|  | int chan_count = indio_dev->num_channels - 1; | 
|  | int ret, i, j; | 
|  |  | 
|  | mutex_lock(&dln2->mutex); | 
|  |  | 
|  | for (i = 0; i < chan_count; ++i) { | 
|  | ret = dln2_adc_set_chan_enabled(dln2, i, | 
|  | test_bit(i, scan_mask)); | 
|  | if (ret < 0) { | 
|  | for (j = 0; j < i; ++j) | 
|  | dln2_adc_set_chan_enabled(dln2, j, false); | 
|  | mutex_unlock(&dln2->mutex); | 
|  | dev_err(&dln2->pdev->dev, | 
|  | "Unable to enable ADC channel %d\n", i); | 
|  | return -EBUSY; | 
|  | } | 
|  | } | 
|  |  | 
|  | dln2_adc_update_demux(dln2); | 
|  |  | 
|  | mutex_unlock(&dln2->mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define DLN2_ADC_CHAN(lval, idx) {					\ | 
|  | lval.type = IIO_VOLTAGE;					\ | 
|  | lval.channel = idx;						\ | 
|  | lval.indexed = 1;						\ | 
|  | lval.info_mask_separate = BIT(IIO_CHAN_INFO_RAW);		\ | 
|  | lval.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE) |	\ | 
|  | BIT(IIO_CHAN_INFO_SAMP_FREQ);	\ | 
|  | lval.scan_index = idx;						\ | 
|  | lval.scan_type.sign = 'u';					\ | 
|  | lval.scan_type.realbits = DLN2_ADC_DATA_BITS;			\ | 
|  | lval.scan_type.storagebits = 16;				\ | 
|  | lval.scan_type.endianness = IIO_LE;				\ | 
|  | } | 
|  |  | 
|  | /* Assignment version of IIO_CHAN_SOFT_TIMESTAMP */ | 
|  | #define IIO_CHAN_SOFT_TIMESTAMP_ASSIGN(lval, _si) {	\ | 
|  | lval.type = IIO_TIMESTAMP;			\ | 
|  | lval.channel = -1;				\ | 
|  | lval.scan_index = _si;				\ | 
|  | lval.scan_type.sign = 's';			\ | 
|  | lval.scan_type.realbits = 64;			\ | 
|  | lval.scan_type.storagebits = 64;		\ | 
|  | } | 
|  |  | 
|  | static const struct iio_info dln2_adc_info = { | 
|  | .read_raw = dln2_adc_read_raw, | 
|  | .write_raw = dln2_adc_write_raw, | 
|  | .update_scan_mode = dln2_update_scan_mode, | 
|  | }; | 
|  |  | 
|  | static irqreturn_t dln2_adc_trigger_h(int irq, void *p) | 
|  | { | 
|  | struct iio_poll_func *pf = p; | 
|  | struct iio_dev *indio_dev = pf->indio_dev; | 
|  | struct { | 
|  | __le16 values[DLN2_ADC_MAX_CHANNELS]; | 
|  | int64_t timestamp_space; | 
|  | } data; | 
|  | struct dln2_adc_get_all_vals dev_data; | 
|  | struct dln2_adc *dln2 = iio_priv(indio_dev); | 
|  | const struct dln2_adc_demux_table *t; | 
|  | int ret, i; | 
|  |  | 
|  | mutex_lock(&dln2->mutex); | 
|  | ret = dln2_adc_read_all(dln2, &dev_data); | 
|  | mutex_unlock(&dln2->mutex); | 
|  | if (ret < 0) | 
|  | goto done; | 
|  |  | 
|  | /* Demux operation */ | 
|  | for (i = 0; i < dln2->demux_count; ++i) { | 
|  | t = &dln2->demux[i]; | 
|  | memcpy((void *)data.values + t->to, | 
|  | (void *)dev_data.values + t->from, t->length); | 
|  | } | 
|  |  | 
|  | /* Zero padding space between values and timestamp */ | 
|  | if (dln2->ts_pad_length) | 
|  | memset((void *)data.values + dln2->ts_pad_offset, | 
|  | 0, dln2->ts_pad_length); | 
|  |  | 
|  | iio_push_to_buffers_with_timestamp(indio_dev, &data, | 
|  | iio_get_time_ns(indio_dev)); | 
|  |  | 
|  | done: | 
|  | iio_trigger_notify_done(indio_dev->trig); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev) | 
|  | { | 
|  | int ret; | 
|  | struct dln2_adc *dln2 = iio_priv(indio_dev); | 
|  | u16 conflict; | 
|  | unsigned int trigger_chan; | 
|  |  | 
|  | mutex_lock(&dln2->mutex); | 
|  |  | 
|  | /* Enable ADC */ | 
|  | ret = dln2_adc_set_port_enabled(dln2, true, &conflict); | 
|  | if (ret < 0) { | 
|  | mutex_unlock(&dln2->mutex); | 
|  | dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); | 
|  | if (conflict) { | 
|  | dev_err(&dln2->pdev->dev, | 
|  | "ADC pins conflict with mask %04X\n", | 
|  | (int)conflict); | 
|  | ret = -EBUSY; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Assign trigger channel based on first enabled channel */ | 
|  | trigger_chan = find_first_bit(indio_dev->active_scan_mask, | 
|  | indio_dev->masklength); | 
|  | if (trigger_chan < DLN2_ADC_MAX_CHANNELS) { | 
|  | dln2->trigger_chan = trigger_chan; | 
|  | ret = dln2_adc_set_chan_period(dln2, dln2->trigger_chan, | 
|  | dln2->sample_period); | 
|  | mutex_unlock(&dln2->mutex); | 
|  | if (ret < 0) { | 
|  | dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); | 
|  | return ret; | 
|  | } | 
|  | } else { | 
|  | dln2->trigger_chan = -1; | 
|  | mutex_unlock(&dln2->mutex); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int dln2_adc_triggered_buffer_predisable(struct iio_dev *indio_dev) | 
|  | { | 
|  | int ret; | 
|  | struct dln2_adc *dln2 = iio_priv(indio_dev); | 
|  |  | 
|  | mutex_lock(&dln2->mutex); | 
|  |  | 
|  | /* Disable trigger channel */ | 
|  | if (dln2->trigger_chan != -1) { | 
|  | dln2_adc_set_chan_period(dln2, dln2->trigger_chan, 0); | 
|  | dln2->trigger_chan = -1; | 
|  | } | 
|  |  | 
|  | /* Disable ADC */ | 
|  | ret = dln2_adc_set_port_enabled(dln2, false, NULL); | 
|  |  | 
|  | mutex_unlock(&dln2->mutex); | 
|  | if (ret < 0) | 
|  | dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct iio_buffer_setup_ops dln2_adc_buffer_setup_ops = { | 
|  | .postenable = dln2_adc_triggered_buffer_postenable, | 
|  | .predisable = dln2_adc_triggered_buffer_predisable, | 
|  | }; | 
|  |  | 
|  | static void dln2_adc_event(struct platform_device *pdev, u16 echo, | 
|  | const void *data, int len) | 
|  | { | 
|  | struct iio_dev *indio_dev = platform_get_drvdata(pdev); | 
|  | struct dln2_adc *dln2 = iio_priv(indio_dev); | 
|  |  | 
|  | /* Called via URB completion handler */ | 
|  | iio_trigger_poll(dln2->trig); | 
|  | } | 
|  |  | 
|  | static int dln2_adc_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct dln2_adc *dln2; | 
|  | struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev); | 
|  | struct iio_dev *indio_dev; | 
|  | int i, ret, chans; | 
|  |  | 
|  | indio_dev = devm_iio_device_alloc(dev, sizeof(*dln2)); | 
|  | if (!indio_dev) { | 
|  | dev_err(dev, "failed allocating iio device\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | dln2 = iio_priv(indio_dev); | 
|  | dln2->pdev = pdev; | 
|  | dln2->port = pdata->port; | 
|  | dln2->trigger_chan = -1; | 
|  | mutex_init(&dln2->mutex); | 
|  |  | 
|  | platform_set_drvdata(pdev, indio_dev); | 
|  |  | 
|  | ret = dln2_adc_set_port_resolution(dln2); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to set ADC resolution to 10 bits\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | chans = dln2_adc_get_chan_count(dln2); | 
|  | if (chans < 0) { | 
|  | dev_err(dev, "failed to get channel count: %d\n", chans); | 
|  | return chans; | 
|  | } | 
|  | if (chans > DLN2_ADC_MAX_CHANNELS) { | 
|  | chans = DLN2_ADC_MAX_CHANNELS; | 
|  | dev_warn(dev, "clamping channels to %d\n", | 
|  | DLN2_ADC_MAX_CHANNELS); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < chans; ++i) | 
|  | DLN2_ADC_CHAN(dln2->iio_channels[i], i) | 
|  | IIO_CHAN_SOFT_TIMESTAMP_ASSIGN(dln2->iio_channels[i], i); | 
|  |  | 
|  | indio_dev->name = DLN2_ADC_MOD_NAME; | 
|  | indio_dev->info = &dln2_adc_info; | 
|  | indio_dev->modes = INDIO_DIRECT_MODE; | 
|  | indio_dev->channels = dln2->iio_channels; | 
|  | indio_dev->num_channels = chans + 1; | 
|  | indio_dev->setup_ops = &dln2_adc_buffer_setup_ops; | 
|  |  | 
|  | dln2->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", | 
|  | indio_dev->name, | 
|  | iio_device_id(indio_dev)); | 
|  | if (!dln2->trig) { | 
|  | dev_err(dev, "failed to allocate trigger\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | iio_trigger_set_drvdata(dln2->trig, dln2); | 
|  | ret = devm_iio_trigger_register(dev, dln2->trig); | 
|  | if (ret) { | 
|  | dev_err(dev, "failed to register trigger: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  | iio_trigger_set_immutable(indio_dev, dln2->trig); | 
|  |  | 
|  | ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, | 
|  | dln2_adc_trigger_h, | 
|  | &dln2_adc_buffer_setup_ops); | 
|  | if (ret) { | 
|  | dev_err(dev, "failed to allocate triggered buffer: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = dln2_register_event_cb(pdev, DLN2_ADC_CONDITION_MET_EV, | 
|  | dln2_adc_event); | 
|  | if (ret) { | 
|  | dev_err(dev, "failed to setup DLN2 periodic event: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = iio_device_register(indio_dev); | 
|  | if (ret) { | 
|  | dev_err(dev, "failed to register iio device: %d\n", ret); | 
|  | goto unregister_event; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | unregister_event: | 
|  | dln2_unregister_event_cb(pdev, DLN2_ADC_CONDITION_MET_EV); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void dln2_adc_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct iio_dev *indio_dev = platform_get_drvdata(pdev); | 
|  |  | 
|  | iio_device_unregister(indio_dev); | 
|  | dln2_unregister_event_cb(pdev, DLN2_ADC_CONDITION_MET_EV); | 
|  | } | 
|  |  | 
|  | static struct platform_driver dln2_adc_driver = { | 
|  | .driver.name	= DLN2_ADC_MOD_NAME, | 
|  | .probe		= dln2_adc_probe, | 
|  | .remove_new	= dln2_adc_remove, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(dln2_adc_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Jack Andersen <jackoalan@gmail.com"); | 
|  | MODULE_DESCRIPTION("Driver for the Diolan DLN2 ADC interface"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_ALIAS("platform:dln2-adc"); |