|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | #include <linux/mm.h> | 
|  | #include <linux/mmzone.h> | 
|  | #include <linux/page_reporting.h> | 
|  | #include <linux/gfp.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/scatterlist.h> | 
|  |  | 
|  | #include "page_reporting.h" | 
|  | #include "internal.h" | 
|  |  | 
|  | /* Initialize to an unsupported value */ | 
|  | unsigned int page_reporting_order = -1; | 
|  |  | 
|  | static int page_order_update_notify(const char *val, const struct kernel_param *kp) | 
|  | { | 
|  | /* | 
|  | * If param is set beyond this limit, order is set to default | 
|  | * pageblock_order value | 
|  | */ | 
|  | return  param_set_uint_minmax(val, kp, 0, MAX_PAGE_ORDER); | 
|  | } | 
|  |  | 
|  | static const struct kernel_param_ops page_reporting_param_ops = { | 
|  | .set = &page_order_update_notify, | 
|  | /* | 
|  | * For the get op, use param_get_int instead of param_get_uint. | 
|  | * This is to make sure that when unset the initialized value of | 
|  | * -1 is shown correctly | 
|  | */ | 
|  | .get = ¶m_get_int, | 
|  | }; | 
|  |  | 
|  | module_param_cb(page_reporting_order, &page_reporting_param_ops, | 
|  | &page_reporting_order, 0644); | 
|  | MODULE_PARM_DESC(page_reporting_order, "Set page reporting order"); | 
|  |  | 
|  | /* | 
|  | * This symbol is also a kernel parameter. Export the page_reporting_order | 
|  | * symbol so that other drivers can access it to control order values without | 
|  | * having to introduce another configurable parameter. Only one driver can | 
|  | * register with the page_reporting driver for the service, so we have just | 
|  | * one control parameter for the use case(which can be accessed in both | 
|  | * drivers) | 
|  | */ | 
|  | EXPORT_SYMBOL_GPL(page_reporting_order); | 
|  |  | 
|  | #define PAGE_REPORTING_DELAY	(2 * HZ) | 
|  | static struct page_reporting_dev_info __rcu *pr_dev_info __read_mostly; | 
|  |  | 
|  | enum { | 
|  | PAGE_REPORTING_IDLE = 0, | 
|  | PAGE_REPORTING_REQUESTED, | 
|  | PAGE_REPORTING_ACTIVE | 
|  | }; | 
|  |  | 
|  | /* request page reporting */ | 
|  | static void | 
|  | __page_reporting_request(struct page_reporting_dev_info *prdev) | 
|  | { | 
|  | unsigned int state; | 
|  |  | 
|  | /* Check to see if we are in desired state */ | 
|  | state = atomic_read(&prdev->state); | 
|  | if (state == PAGE_REPORTING_REQUESTED) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * If reporting is already active there is nothing we need to do. | 
|  | * Test against 0 as that represents PAGE_REPORTING_IDLE. | 
|  | */ | 
|  | state = atomic_xchg(&prdev->state, PAGE_REPORTING_REQUESTED); | 
|  | if (state != PAGE_REPORTING_IDLE) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Delay the start of work to allow a sizable queue to build. For | 
|  | * now we are limiting this to running no more than once every | 
|  | * couple of seconds. | 
|  | */ | 
|  | schedule_delayed_work(&prdev->work, PAGE_REPORTING_DELAY); | 
|  | } | 
|  |  | 
|  | /* notify prdev of free page reporting request */ | 
|  | void __page_reporting_notify(void) | 
|  | { | 
|  | struct page_reporting_dev_info *prdev; | 
|  |  | 
|  | /* | 
|  | * We use RCU to protect the pr_dev_info pointer. In almost all | 
|  | * cases this should be present, however in the unlikely case of | 
|  | * a shutdown this will be NULL and we should exit. | 
|  | */ | 
|  | rcu_read_lock(); | 
|  | prdev = rcu_dereference(pr_dev_info); | 
|  | if (likely(prdev)) | 
|  | __page_reporting_request(prdev); | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static void | 
|  | page_reporting_drain(struct page_reporting_dev_info *prdev, | 
|  | struct scatterlist *sgl, unsigned int nents, bool reported) | 
|  | { | 
|  | struct scatterlist *sg = sgl; | 
|  |  | 
|  | /* | 
|  | * Drain the now reported pages back into their respective | 
|  | * free lists/areas. We assume at least one page is populated. | 
|  | */ | 
|  | do { | 
|  | struct page *page = sg_page(sg); | 
|  | int mt = get_pageblock_migratetype(page); | 
|  | unsigned int order = get_order(sg->length); | 
|  |  | 
|  | __putback_isolated_page(page, order, mt); | 
|  |  | 
|  | /* If the pages were not reported due to error skip flagging */ | 
|  | if (!reported) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * If page was not comingled with another page we can | 
|  | * consider the result to be "reported" since the page | 
|  | * hasn't been modified, otherwise we will need to | 
|  | * report on the new larger page when we make our way | 
|  | * up to that higher order. | 
|  | */ | 
|  | if (PageBuddy(page) && buddy_order(page) == order) | 
|  | __SetPageReported(page); | 
|  | } while ((sg = sg_next(sg))); | 
|  |  | 
|  | /* reinitialize scatterlist now that it is empty */ | 
|  | sg_init_table(sgl, nents); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The page reporting cycle consists of 4 stages, fill, report, drain, and | 
|  | * idle. We will cycle through the first 3 stages until we cannot obtain a | 
|  | * full scatterlist of pages, in that case we will switch to idle. | 
|  | */ | 
|  | static int | 
|  | page_reporting_cycle(struct page_reporting_dev_info *prdev, struct zone *zone, | 
|  | unsigned int order, unsigned int mt, | 
|  | struct scatterlist *sgl, unsigned int *offset) | 
|  | { | 
|  | struct free_area *area = &zone->free_area[order]; | 
|  | struct list_head *list = &area->free_list[mt]; | 
|  | unsigned int page_len = PAGE_SIZE << order; | 
|  | struct page *page, *next; | 
|  | long budget; | 
|  | int err = 0; | 
|  |  | 
|  | /* | 
|  | * Perform early check, if free area is empty there is | 
|  | * nothing to process so we can skip this free_list. | 
|  | */ | 
|  | if (list_empty(list)) | 
|  | return err; | 
|  |  | 
|  | spin_lock_irq(&zone->lock); | 
|  |  | 
|  | /* | 
|  | * Limit how many calls we will be making to the page reporting | 
|  | * device for this list. By doing this we avoid processing any | 
|  | * given list for too long. | 
|  | * | 
|  | * The current value used allows us enough calls to process over a | 
|  | * sixteenth of the current list plus one additional call to handle | 
|  | * any pages that may have already been present from the previous | 
|  | * list processed. This should result in us reporting all pages on | 
|  | * an idle system in about 30 seconds. | 
|  | * | 
|  | * The division here should be cheap since PAGE_REPORTING_CAPACITY | 
|  | * should always be a power of 2. | 
|  | */ | 
|  | budget = DIV_ROUND_UP(area->nr_free, PAGE_REPORTING_CAPACITY * 16); | 
|  |  | 
|  | /* loop through free list adding unreported pages to sg list */ | 
|  | list_for_each_entry_safe(page, next, list, lru) { | 
|  | /* We are going to skip over the reported pages. */ | 
|  | if (PageReported(page)) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * If we fully consumed our budget then update our | 
|  | * state to indicate that we are requesting additional | 
|  | * processing and exit this list. | 
|  | */ | 
|  | if (budget < 0) { | 
|  | atomic_set(&prdev->state, PAGE_REPORTING_REQUESTED); | 
|  | next = page; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Attempt to pull page from list and place in scatterlist */ | 
|  | if (*offset) { | 
|  | if (!__isolate_free_page(page, order)) { | 
|  | next = page; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Add page to scatter list */ | 
|  | --(*offset); | 
|  | sg_set_page(&sgl[*offset], page, page_len, 0); | 
|  |  | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Make the first non-reported page in the free list | 
|  | * the new head of the free list before we release the | 
|  | * zone lock. | 
|  | */ | 
|  | if (!list_is_first(&page->lru, list)) | 
|  | list_rotate_to_front(&page->lru, list); | 
|  |  | 
|  | /* release lock before waiting on report processing */ | 
|  | spin_unlock_irq(&zone->lock); | 
|  |  | 
|  | /* begin processing pages in local list */ | 
|  | err = prdev->report(prdev, sgl, PAGE_REPORTING_CAPACITY); | 
|  |  | 
|  | /* reset offset since the full list was reported */ | 
|  | *offset = PAGE_REPORTING_CAPACITY; | 
|  |  | 
|  | /* update budget to reflect call to report function */ | 
|  | budget--; | 
|  |  | 
|  | /* reacquire zone lock and resume processing */ | 
|  | spin_lock_irq(&zone->lock); | 
|  |  | 
|  | /* flush reported pages from the sg list */ | 
|  | page_reporting_drain(prdev, sgl, PAGE_REPORTING_CAPACITY, !err); | 
|  |  | 
|  | /* | 
|  | * Reset next to first entry, the old next isn't valid | 
|  | * since we dropped the lock to report the pages | 
|  | */ | 
|  | next = list_first_entry(list, struct page, lru); | 
|  |  | 
|  | /* exit on error */ | 
|  | if (err) | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Rotate any leftover pages to the head of the freelist */ | 
|  | if (!list_entry_is_head(next, list, lru) && !list_is_first(&next->lru, list)) | 
|  | list_rotate_to_front(&next->lru, list); | 
|  |  | 
|  | spin_unlock_irq(&zone->lock); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int | 
|  | page_reporting_process_zone(struct page_reporting_dev_info *prdev, | 
|  | struct scatterlist *sgl, struct zone *zone) | 
|  | { | 
|  | unsigned int order, mt, leftover, offset = PAGE_REPORTING_CAPACITY; | 
|  | unsigned long watermark; | 
|  | int err = 0; | 
|  |  | 
|  | /* Generate minimum watermark to be able to guarantee progress */ | 
|  | watermark = low_wmark_pages(zone) + | 
|  | (PAGE_REPORTING_CAPACITY << page_reporting_order); | 
|  |  | 
|  | /* | 
|  | * Cancel request if insufficient free memory or if we failed | 
|  | * to allocate page reporting statistics for the zone. | 
|  | */ | 
|  | if (!zone_watermark_ok(zone, 0, watermark, 0, ALLOC_CMA)) | 
|  | return err; | 
|  |  | 
|  | /* Process each free list starting from lowest order/mt */ | 
|  | for (order = page_reporting_order; order < NR_PAGE_ORDERS; order++) { | 
|  | for (mt = 0; mt < MIGRATE_TYPES; mt++) { | 
|  | /* We do not pull pages from the isolate free list */ | 
|  | if (is_migrate_isolate(mt)) | 
|  | continue; | 
|  |  | 
|  | err = page_reporting_cycle(prdev, zone, order, mt, | 
|  | sgl, &offset); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* report the leftover pages before going idle */ | 
|  | leftover = PAGE_REPORTING_CAPACITY - offset; | 
|  | if (leftover) { | 
|  | sgl = &sgl[offset]; | 
|  | err = prdev->report(prdev, sgl, leftover); | 
|  |  | 
|  | /* flush any remaining pages out from the last report */ | 
|  | spin_lock_irq(&zone->lock); | 
|  | page_reporting_drain(prdev, sgl, leftover, !err); | 
|  | spin_unlock_irq(&zone->lock); | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void page_reporting_process(struct work_struct *work) | 
|  | { | 
|  | struct delayed_work *d_work = to_delayed_work(work); | 
|  | struct page_reporting_dev_info *prdev = | 
|  | container_of(d_work, struct page_reporting_dev_info, work); | 
|  | int err = 0, state = PAGE_REPORTING_ACTIVE; | 
|  | struct scatterlist *sgl; | 
|  | struct zone *zone; | 
|  |  | 
|  | /* | 
|  | * Change the state to "Active" so that we can track if there is | 
|  | * anyone requests page reporting after we complete our pass. If | 
|  | * the state is not altered by the end of the pass we will switch | 
|  | * to idle and quit scheduling reporting runs. | 
|  | */ | 
|  | atomic_set(&prdev->state, state); | 
|  |  | 
|  | /* allocate scatterlist to store pages being reported on */ | 
|  | sgl = kmalloc_array(PAGE_REPORTING_CAPACITY, sizeof(*sgl), GFP_KERNEL); | 
|  | if (!sgl) | 
|  | goto err_out; | 
|  |  | 
|  | sg_init_table(sgl, PAGE_REPORTING_CAPACITY); | 
|  |  | 
|  | for_each_zone(zone) { | 
|  | err = page_reporting_process_zone(prdev, sgl, zone); | 
|  | if (err) | 
|  | break; | 
|  | } | 
|  |  | 
|  | kfree(sgl); | 
|  | err_out: | 
|  | /* | 
|  | * If the state has reverted back to requested then there may be | 
|  | * additional pages to be processed. We will defer for 2s to allow | 
|  | * more pages to accumulate. | 
|  | */ | 
|  | state = atomic_cmpxchg(&prdev->state, state, PAGE_REPORTING_IDLE); | 
|  | if (state == PAGE_REPORTING_REQUESTED) | 
|  | schedule_delayed_work(&prdev->work, PAGE_REPORTING_DELAY); | 
|  | } | 
|  |  | 
|  | static DEFINE_MUTEX(page_reporting_mutex); | 
|  | DEFINE_STATIC_KEY_FALSE(page_reporting_enabled); | 
|  |  | 
|  | int page_reporting_register(struct page_reporting_dev_info *prdev) | 
|  | { | 
|  | int err = 0; | 
|  |  | 
|  | mutex_lock(&page_reporting_mutex); | 
|  |  | 
|  | /* nothing to do if already in use */ | 
|  | if (rcu_dereference_protected(pr_dev_info, | 
|  | lockdep_is_held(&page_reporting_mutex))) { | 
|  | err = -EBUSY; | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the page_reporting_order value is not set, we check if | 
|  | * an order is provided from the driver that is performing the | 
|  | * registration. If that is not provided either, we default to | 
|  | * pageblock_order. | 
|  | */ | 
|  |  | 
|  | if (page_reporting_order == -1) { | 
|  | if (prdev->order > 0 && prdev->order <= MAX_PAGE_ORDER) | 
|  | page_reporting_order = prdev->order; | 
|  | else | 
|  | page_reporting_order = pageblock_order; | 
|  | } | 
|  |  | 
|  | /* initialize state and work structures */ | 
|  | atomic_set(&prdev->state, PAGE_REPORTING_IDLE); | 
|  | INIT_DELAYED_WORK(&prdev->work, &page_reporting_process); | 
|  |  | 
|  | /* Begin initial flush of zones */ | 
|  | __page_reporting_request(prdev); | 
|  |  | 
|  | /* Assign device to allow notifications */ | 
|  | rcu_assign_pointer(pr_dev_info, prdev); | 
|  |  | 
|  | /* enable page reporting notification */ | 
|  | if (!static_key_enabled(&page_reporting_enabled)) { | 
|  | static_branch_enable(&page_reporting_enabled); | 
|  | pr_info("Free page reporting enabled\n"); | 
|  | } | 
|  | err_out: | 
|  | mutex_unlock(&page_reporting_mutex); | 
|  |  | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(page_reporting_register); | 
|  |  | 
|  | void page_reporting_unregister(struct page_reporting_dev_info *prdev) | 
|  | { | 
|  | mutex_lock(&page_reporting_mutex); | 
|  |  | 
|  | if (prdev == rcu_dereference_protected(pr_dev_info, | 
|  | lockdep_is_held(&page_reporting_mutex))) { | 
|  | /* Disable page reporting notification */ | 
|  | RCU_INIT_POINTER(pr_dev_info, NULL); | 
|  | synchronize_rcu(); | 
|  |  | 
|  | /* Flush any existing work, and lock it out */ | 
|  | cancel_delayed_work_sync(&prdev->work); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&page_reporting_mutex); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(page_reporting_unregister); |