| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * High-level sync()-related operations | 
 |  */ | 
 |  | 
 | #include <linux/blkdev.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/file.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/export.h> | 
 | #include <linux/namei.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/writeback.h> | 
 | #include <linux/syscalls.h> | 
 | #include <linux/linkage.h> | 
 | #include <linux/pagemap.h> | 
 | #include <linux/quotaops.h> | 
 | #include <linux/backing-dev.h> | 
 | #include "internal.h" | 
 |  | 
 | #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \ | 
 | 			SYNC_FILE_RANGE_WAIT_AFTER) | 
 |  | 
 | /* | 
 |  * Write out and wait upon all dirty data associated with this | 
 |  * superblock.  Filesystem data as well as the underlying block | 
 |  * device.  Takes the superblock lock. | 
 |  */ | 
 | int sync_filesystem(struct super_block *sb) | 
 | { | 
 | 	int ret = 0; | 
 |  | 
 | 	/* | 
 | 	 * We need to be protected against the filesystem going from | 
 | 	 * r/o to r/w or vice versa. | 
 | 	 */ | 
 | 	WARN_ON(!rwsem_is_locked(&sb->s_umount)); | 
 |  | 
 | 	/* | 
 | 	 * No point in syncing out anything if the filesystem is read-only. | 
 | 	 */ | 
 | 	if (sb_rdonly(sb)) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * Do the filesystem syncing work.  For simple filesystems | 
 | 	 * writeback_inodes_sb(sb) just dirties buffers with inodes so we have | 
 | 	 * to submit I/O for these buffers via sync_blockdev().  This also | 
 | 	 * speeds up the wait == 1 case since in that case write_inode() | 
 | 	 * methods call sync_dirty_buffer() and thus effectively write one block | 
 | 	 * at a time. | 
 | 	 */ | 
 | 	writeback_inodes_sb(sb, WB_REASON_SYNC); | 
 | 	if (sb->s_op->sync_fs) { | 
 | 		ret = sb->s_op->sync_fs(sb, 0); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 | 	ret = sync_blockdev_nowait(sb->s_bdev); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	sync_inodes_sb(sb); | 
 | 	if (sb->s_op->sync_fs) { | 
 | 		ret = sb->s_op->sync_fs(sb, 1); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 | 	return sync_blockdev(sb->s_bdev); | 
 | } | 
 | EXPORT_SYMBOL(sync_filesystem); | 
 |  | 
 | static void sync_inodes_one_sb(struct super_block *sb, void *arg) | 
 | { | 
 | 	if (!sb_rdonly(sb)) | 
 | 		sync_inodes_sb(sb); | 
 | } | 
 |  | 
 | static void sync_fs_one_sb(struct super_block *sb, void *arg) | 
 | { | 
 | 	if (!sb_rdonly(sb) && !(sb->s_iflags & SB_I_SKIP_SYNC) && | 
 | 	    sb->s_op->sync_fs) | 
 | 		sb->s_op->sync_fs(sb, *(int *)arg); | 
 | } | 
 |  | 
 | /* | 
 |  * Sync everything. We start by waking flusher threads so that most of | 
 |  * writeback runs on all devices in parallel. Then we sync all inodes reliably | 
 |  * which effectively also waits for all flusher threads to finish doing | 
 |  * writeback. At this point all data is on disk so metadata should be stable | 
 |  * and we tell filesystems to sync their metadata via ->sync_fs() calls. | 
 |  * Finally, we writeout all block devices because some filesystems (e.g. ext2) | 
 |  * just write metadata (such as inodes or bitmaps) to block device page cache | 
 |  * and do not sync it on their own in ->sync_fs(). | 
 |  */ | 
 | void ksys_sync(void) | 
 | { | 
 | 	int nowait = 0, wait = 1; | 
 |  | 
 | 	wakeup_flusher_threads(WB_REASON_SYNC); | 
 | 	iterate_supers(sync_inodes_one_sb, NULL); | 
 | 	iterate_supers(sync_fs_one_sb, &nowait); | 
 | 	iterate_supers(sync_fs_one_sb, &wait); | 
 | 	sync_bdevs(false); | 
 | 	sync_bdevs(true); | 
 | 	if (unlikely(laptop_mode)) | 
 | 		laptop_sync_completion(); | 
 | } | 
 |  | 
 | SYSCALL_DEFINE0(sync) | 
 | { | 
 | 	ksys_sync(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void do_sync_work(struct work_struct *work) | 
 | { | 
 | 	int nowait = 0; | 
 |  | 
 | 	/* | 
 | 	 * Sync twice to reduce the possibility we skipped some inodes / pages | 
 | 	 * because they were temporarily locked | 
 | 	 */ | 
 | 	iterate_supers(sync_inodes_one_sb, &nowait); | 
 | 	iterate_supers(sync_fs_one_sb, &nowait); | 
 | 	sync_bdevs(false); | 
 | 	iterate_supers(sync_inodes_one_sb, &nowait); | 
 | 	iterate_supers(sync_fs_one_sb, &nowait); | 
 | 	sync_bdevs(false); | 
 | 	printk("Emergency Sync complete\n"); | 
 | 	kfree(work); | 
 | } | 
 |  | 
 | void emergency_sync(void) | 
 | { | 
 | 	struct work_struct *work; | 
 |  | 
 | 	work = kmalloc(sizeof(*work), GFP_ATOMIC); | 
 | 	if (work) { | 
 | 		INIT_WORK(work, do_sync_work); | 
 | 		schedule_work(work); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * sync a single super | 
 |  */ | 
 | SYSCALL_DEFINE1(syncfs, int, fd) | 
 | { | 
 | 	struct fd f = fdget(fd); | 
 | 	struct super_block *sb; | 
 | 	int ret, ret2; | 
 |  | 
 | 	if (!f.file) | 
 | 		return -EBADF; | 
 | 	sb = f.file->f_path.dentry->d_sb; | 
 |  | 
 | 	down_read(&sb->s_umount); | 
 | 	ret = sync_filesystem(sb); | 
 | 	up_read(&sb->s_umount); | 
 |  | 
 | 	ret2 = errseq_check_and_advance(&sb->s_wb_err, &f.file->f_sb_err); | 
 |  | 
 | 	fdput(f); | 
 | 	return ret ? ret : ret2; | 
 | } | 
 |  | 
 | /** | 
 |  * vfs_fsync_range - helper to sync a range of data & metadata to disk | 
 |  * @file:		file to sync | 
 |  * @start:		offset in bytes of the beginning of data range to sync | 
 |  * @end:		offset in bytes of the end of data range (inclusive) | 
 |  * @datasync:		perform only datasync | 
 |  * | 
 |  * Write back data in range @start..@end and metadata for @file to disk.  If | 
 |  * @datasync is set only metadata needed to access modified file data is | 
 |  * written. | 
 |  */ | 
 | int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync) | 
 | { | 
 | 	struct inode *inode = file->f_mapping->host; | 
 |  | 
 | 	if (!file->f_op->fsync) | 
 | 		return -EINVAL; | 
 | 	if (!datasync && (inode->i_state & I_DIRTY_TIME)) | 
 | 		mark_inode_dirty_sync(inode); | 
 | 	return file->f_op->fsync(file, start, end, datasync); | 
 | } | 
 | EXPORT_SYMBOL(vfs_fsync_range); | 
 |  | 
 | /** | 
 |  * vfs_fsync - perform a fsync or fdatasync on a file | 
 |  * @file:		file to sync | 
 |  * @datasync:		only perform a fdatasync operation | 
 |  * | 
 |  * Write back data and metadata for @file to disk.  If @datasync is | 
 |  * set only metadata needed to access modified file data is written. | 
 |  */ | 
 | int vfs_fsync(struct file *file, int datasync) | 
 | { | 
 | 	return vfs_fsync_range(file, 0, LLONG_MAX, datasync); | 
 | } | 
 | EXPORT_SYMBOL(vfs_fsync); | 
 |  | 
 | static int do_fsync(unsigned int fd, int datasync) | 
 | { | 
 | 	struct fd f = fdget(fd); | 
 | 	int ret = -EBADF; | 
 |  | 
 | 	if (f.file) { | 
 | 		ret = vfs_fsync(f.file, datasync); | 
 | 		fdput(f); | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | SYSCALL_DEFINE1(fsync, unsigned int, fd) | 
 | { | 
 | 	return do_fsync(fd, 0); | 
 | } | 
 |  | 
 | SYSCALL_DEFINE1(fdatasync, unsigned int, fd) | 
 | { | 
 | 	return do_fsync(fd, 1); | 
 | } | 
 |  | 
 | int sync_file_range(struct file *file, loff_t offset, loff_t nbytes, | 
 | 		    unsigned int flags) | 
 | { | 
 | 	int ret; | 
 | 	struct address_space *mapping; | 
 | 	loff_t endbyte;			/* inclusive */ | 
 | 	umode_t i_mode; | 
 |  | 
 | 	ret = -EINVAL; | 
 | 	if (flags & ~VALID_FLAGS) | 
 | 		goto out; | 
 |  | 
 | 	endbyte = offset + nbytes; | 
 |  | 
 | 	if ((s64)offset < 0) | 
 | 		goto out; | 
 | 	if ((s64)endbyte < 0) | 
 | 		goto out; | 
 | 	if (endbyte < offset) | 
 | 		goto out; | 
 |  | 
 | 	if (sizeof(pgoff_t) == 4) { | 
 | 		if (offset >= (0x100000000ULL << PAGE_SHIFT)) { | 
 | 			/* | 
 | 			 * The range starts outside a 32 bit machine's | 
 | 			 * pagecache addressing capabilities.  Let it "succeed" | 
 | 			 */ | 
 | 			ret = 0; | 
 | 			goto out; | 
 | 		} | 
 | 		if (endbyte >= (0x100000000ULL << PAGE_SHIFT)) { | 
 | 			/* | 
 | 			 * Out to EOF | 
 | 			 */ | 
 | 			nbytes = 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (nbytes == 0) | 
 | 		endbyte = LLONG_MAX; | 
 | 	else | 
 | 		endbyte--;		/* inclusive */ | 
 |  | 
 | 	i_mode = file_inode(file)->i_mode; | 
 | 	ret = -ESPIPE; | 
 | 	if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) && | 
 | 			!S_ISLNK(i_mode)) | 
 | 		goto out; | 
 |  | 
 | 	mapping = file->f_mapping; | 
 | 	ret = 0; | 
 | 	if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) { | 
 | 		ret = file_fdatawait_range(file, offset, endbyte); | 
 | 		if (ret < 0) | 
 | 			goto out; | 
 | 	} | 
 |  | 
 | 	if (flags & SYNC_FILE_RANGE_WRITE) { | 
 | 		int sync_mode = WB_SYNC_NONE; | 
 |  | 
 | 		if ((flags & SYNC_FILE_RANGE_WRITE_AND_WAIT) == | 
 | 			     SYNC_FILE_RANGE_WRITE_AND_WAIT) | 
 | 			sync_mode = WB_SYNC_ALL; | 
 |  | 
 | 		ret = __filemap_fdatawrite_range(mapping, offset, endbyte, | 
 | 						 sync_mode); | 
 | 		if (ret < 0) | 
 | 			goto out; | 
 | 	} | 
 |  | 
 | 	if (flags & SYNC_FILE_RANGE_WAIT_AFTER) | 
 | 		ret = file_fdatawait_range(file, offset, endbyte); | 
 |  | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * ksys_sync_file_range() permits finely controlled syncing over a segment of | 
 |  * a file in the range offset .. (offset+nbytes-1) inclusive.  If nbytes is | 
 |  * zero then ksys_sync_file_range() will operate from offset out to EOF. | 
 |  * | 
 |  * The flag bits are: | 
 |  * | 
 |  * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range | 
 |  * before performing the write. | 
 |  * | 
 |  * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the | 
 |  * range which are not presently under writeback. Note that this may block for | 
 |  * significant periods due to exhaustion of disk request structures. | 
 |  * | 
 |  * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range | 
 |  * after performing the write. | 
 |  * | 
 |  * Useful combinations of the flag bits are: | 
 |  * | 
 |  * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages | 
 |  * in the range which were dirty on entry to ksys_sync_file_range() are placed | 
 |  * under writeout.  This is a start-write-for-data-integrity operation. | 
 |  * | 
 |  * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which | 
 |  * are not presently under writeout.  This is an asynchronous flush-to-disk | 
 |  * operation.  Not suitable for data integrity operations. | 
 |  * | 
 |  * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for | 
 |  * completion of writeout of all pages in the range.  This will be used after an | 
 |  * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait | 
 |  * for that operation to complete and to return the result. | 
 |  * | 
 |  * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER | 
 |  * (a.k.a. SYNC_FILE_RANGE_WRITE_AND_WAIT): | 
 |  * a traditional sync() operation.  This is a write-for-data-integrity operation | 
 |  * which will ensure that all pages in the range which were dirty on entry to | 
 |  * ksys_sync_file_range() are written to disk.  It should be noted that disk | 
 |  * caches are not flushed by this call, so there are no guarantees here that the | 
 |  * data will be available on disk after a crash. | 
 |  * | 
 |  * | 
 |  * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any | 
 |  * I/O errors or ENOSPC conditions and will return those to the caller, after | 
 |  * clearing the EIO and ENOSPC flags in the address_space. | 
 |  * | 
 |  * It should be noted that none of these operations write out the file's | 
 |  * metadata.  So unless the application is strictly performing overwrites of | 
 |  * already-instantiated disk blocks, there are no guarantees here that the data | 
 |  * will be available after a crash. | 
 |  */ | 
 | int ksys_sync_file_range(int fd, loff_t offset, loff_t nbytes, | 
 | 			 unsigned int flags) | 
 | { | 
 | 	int ret; | 
 | 	struct fd f; | 
 |  | 
 | 	ret = -EBADF; | 
 | 	f = fdget(fd); | 
 | 	if (f.file) | 
 | 		ret = sync_file_range(f.file, offset, nbytes, flags); | 
 |  | 
 | 	fdput(f); | 
 | 	return ret; | 
 | } | 
 |  | 
 | SYSCALL_DEFINE4(sync_file_range, int, fd, loff_t, offset, loff_t, nbytes, | 
 | 				unsigned int, flags) | 
 | { | 
 | 	return ksys_sync_file_range(fd, offset, nbytes, flags); | 
 | } | 
 |  | 
 | #if defined(CONFIG_COMPAT) && defined(__ARCH_WANT_COMPAT_SYNC_FILE_RANGE) | 
 | COMPAT_SYSCALL_DEFINE6(sync_file_range, int, fd, compat_arg_u64_dual(offset), | 
 | 		       compat_arg_u64_dual(nbytes), unsigned int, flags) | 
 | { | 
 | 	return ksys_sync_file_range(fd, compat_arg_u64_glue(offset), | 
 | 				    compat_arg_u64_glue(nbytes), flags); | 
 | } | 
 | #endif | 
 |  | 
 | /* It would be nice if people remember that not all the world's an i386 | 
 |    when they introduce new system calls */ | 
 | SYSCALL_DEFINE4(sync_file_range2, int, fd, unsigned int, flags, | 
 | 				 loff_t, offset, loff_t, nbytes) | 
 | { | 
 | 	return ksys_sync_file_range(fd, offset, nbytes, flags); | 
 | } |