blob: 710a59764b01c164d3ffae92f18a394224bdc153 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* ip27-irq.c: Highlevel interrupt handling for IP27 architecture.
*
* Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 1999 - 2001 Kanoj Sarcar
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <asm/io.h>
#include <asm/irq_cpu.h>
#include <asm/pci/bridge.h>
#include <asm/sn/addrs.h>
#include <asm/sn/agent.h>
#include <asm/sn/arch.h>
#include <asm/sn/hub.h>
#include <asm/sn/intr.h>
struct hub_irq_data {
struct bridge_controller *bc;
u64 *irq_mask[2];
cpuid_t cpu;
int bit;
int pin;
};
static DECLARE_BITMAP(hub_irq_map, IP27_HUB_IRQ_COUNT);
static DEFINE_PER_CPU(unsigned long [2], irq_enable_mask);
static inline int alloc_level(void)
{
int level;
again:
level = find_first_zero_bit(hub_irq_map, IP27_HUB_IRQ_COUNT);
if (level >= IP27_HUB_IRQ_COUNT)
return -ENOSPC;
if (test_and_set_bit(level, hub_irq_map))
goto again;
return level;
}
static void enable_hub_irq(struct irq_data *d)
{
struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu);
set_bit(hd->bit, mask);
__raw_writeq(mask[0], hd->irq_mask[0]);
__raw_writeq(mask[1], hd->irq_mask[1]);
}
static void disable_hub_irq(struct irq_data *d)
{
struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu);
clear_bit(hd->bit, mask);
__raw_writeq(mask[0], hd->irq_mask[0]);
__raw_writeq(mask[1], hd->irq_mask[1]);
}
static unsigned int startup_bridge_irq(struct irq_data *d)
{
struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
struct bridge_controller *bc;
nasid_t nasid;
u32 device;
int pin;
if (!hd)
return -EINVAL;
pin = hd->pin;
bc = hd->bc;
nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(hd->cpu));
bridge_write(bc, b_int_addr[pin].addr,
(0x20000 | hd->bit | (nasid << 8)));
bridge_set(bc, b_int_enable, (1 << pin));
bridge_set(bc, b_int_enable, 0x7ffffe00); /* more stuff in int_enable */
/*
* Enable sending of an interrupt clear packt to the hub on a high to
* low transition of the interrupt pin.
*
* IRIX sets additional bits in the address which are documented as
* reserved in the bridge docs.
*/
bridge_set(bc, b_int_mode, (1UL << pin));
/*
* We assume the bridge to have a 1:1 mapping between devices
* (slots) and intr pins.
*/
device = bridge_read(bc, b_int_device);
device &= ~(7 << (pin*3));
device |= (pin << (pin*3));
bridge_write(bc, b_int_device, device);
bridge_read(bc, b_wid_tflush);
enable_hub_irq(d);
return 0; /* Never anything pending. */
}
static void shutdown_bridge_irq(struct irq_data *d)
{
struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
struct bridge_controller *bc;
int pin = hd->pin;
if (!hd)
return;
disable_hub_irq(d);
bc = hd->bc;
bridge_clr(bc, b_int_enable, (1 << pin));
bridge_read(bc, b_wid_tflush);
}
static void setup_hub_mask(struct hub_irq_data *hd, const struct cpumask *mask)
{
nasid_t nasid;
int cpu;
cpu = cpumask_first_and(mask, cpu_online_mask);
nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
hd->cpu = cpu;
if (!cputoslice(cpu)) {
hd->irq_mask[0] = REMOTE_HUB_PTR(nasid, PI_INT_MASK0_A);
hd->irq_mask[1] = REMOTE_HUB_PTR(nasid, PI_INT_MASK1_A);
} else {
hd->irq_mask[0] = REMOTE_HUB_PTR(nasid, PI_INT_MASK0_B);
hd->irq_mask[1] = REMOTE_HUB_PTR(nasid, PI_INT_MASK1_B);
}
/* Make sure it's not already pending when we connect it. */
REMOTE_HUB_CLR_INTR(nasid, hd->bit);
}
static int set_affinity_hub_irq(struct irq_data *d, const struct cpumask *mask,
bool force)
{
struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
if (!hd)
return -EINVAL;
if (irqd_is_started(d))
disable_hub_irq(d);
setup_hub_mask(hd, mask);
if (irqd_is_started(d))
startup_bridge_irq(d);
irq_data_update_effective_affinity(d, cpumask_of(hd->cpu));
return 0;
}
static struct irq_chip hub_irq_type = {
.name = "HUB",
.irq_startup = startup_bridge_irq,
.irq_shutdown = shutdown_bridge_irq,
.irq_mask = disable_hub_irq,
.irq_unmask = enable_hub_irq,
.irq_set_affinity = set_affinity_hub_irq,
};
int request_bridge_irq(struct bridge_controller *bc, int pin)
{
struct hub_irq_data *hd;
struct hub_data *hub;
struct irq_desc *desc;
int swlevel;
int irq;
hd = kzalloc(sizeof(*hd), GFP_KERNEL);
if (!hd)
return -ENOMEM;
swlevel = alloc_level();
if (unlikely(swlevel < 0)) {
kfree(hd);
return -EAGAIN;
}
irq = swlevel + IP27_HUB_IRQ_BASE;
hd->bc = bc;
hd->bit = swlevel;
hd->pin = pin;
irq_set_chip_data(irq, hd);
/* use CPU connected to nearest hub */
hub = hub_data(NASID_TO_COMPACT_NODEID(bc->nasid));
setup_hub_mask(hd, &hub->h_cpus);
desc = irq_to_desc(irq);
desc->irq_common_data.node = bc->nasid;
cpumask_copy(desc->irq_common_data.affinity, &hub->h_cpus);
return irq;
}
void ip27_hub_irq_init(void)
{
int i;
for (i = IP27_HUB_IRQ_BASE;
i < (IP27_HUB_IRQ_BASE + IP27_HUB_IRQ_COUNT); i++)
irq_set_chip_and_handler(i, &hub_irq_type, handle_level_irq);
/*
* Some interrupts are reserved by hardware or by software convention.
* Mark these as reserved right away so they won't be used accidentally
* later.
*/
for (i = 0; i <= BASE_PCI_IRQ; i++)
set_bit(i, hub_irq_map);
set_bit(IP_PEND0_6_63, hub_irq_map);
for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++)
set_bit(i, hub_irq_map);
}
/*
* This code is unnecessarily complex, because we do
* intr enabling. Basically, once we grab the set of intrs we need
* to service, we must mask _all_ these interrupts; firstly, to make
* sure the same intr does not intr again, causing recursion that
* can lead to stack overflow. Secondly, we can not just mask the
* one intr we are do_IRQing, because the non-masked intrs in the
* first set might intr again, causing multiple servicings of the
* same intr. This effect is mostly seen for intercpu intrs.
* Kanoj 05.13.00
*/
static void ip27_do_irq_mask0(struct irq_desc *desc)
{
cpuid_t cpu = smp_processor_id();
unsigned long *mask = per_cpu(irq_enable_mask, cpu);
u64 pend0;
/* copied from Irix intpend0() */
pend0 = LOCAL_HUB_L(PI_INT_PEND0);
pend0 &= mask[0]; /* Pick intrs we should look at */
if (!pend0)
return;
#ifdef CONFIG_SMP
if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) {
LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
scheduler_ipi();
} else if (pend0 & (1UL << CPU_RESCHED_B_IRQ)) {
LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
scheduler_ipi();
} else if (pend0 & (1UL << CPU_CALL_A_IRQ)) {
LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
generic_smp_call_function_interrupt();
} else if (pend0 & (1UL << CPU_CALL_B_IRQ)) {
LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ);
generic_smp_call_function_interrupt();
} else
#endif
generic_handle_irq(__ffs(pend0) + IP27_HUB_IRQ_BASE);
LOCAL_HUB_L(PI_INT_PEND0);
}
static void ip27_do_irq_mask1(struct irq_desc *desc)
{
cpuid_t cpu = smp_processor_id();
unsigned long *mask = per_cpu(irq_enable_mask, cpu);
u64 pend1;
/* copied from Irix intpend0() */
pend1 = LOCAL_HUB_L(PI_INT_PEND1);
pend1 &= mask[1]; /* Pick intrs we should look at */
if (!pend1)
return;
generic_handle_irq(__ffs(pend1) + IP27_HUB_IRQ_BASE + 64);
LOCAL_HUB_L(PI_INT_PEND1);
}
void install_ipi(void)
{
int cpu = smp_processor_id();
unsigned long *mask = per_cpu(irq_enable_mask, cpu);
int slice = LOCAL_HUB_L(PI_CPU_NUM);
int resched, call;
resched = CPU_RESCHED_A_IRQ + slice;
set_bit(resched, mask);
LOCAL_HUB_CLR_INTR(resched);
call = CPU_CALL_A_IRQ + slice;
set_bit(call, mask);
LOCAL_HUB_CLR_INTR(call);
if (slice == 0) {
LOCAL_HUB_S(PI_INT_MASK0_A, mask[0]);
LOCAL_HUB_S(PI_INT_MASK1_A, mask[1]);
} else {
LOCAL_HUB_S(PI_INT_MASK0_B, mask[0]);
LOCAL_HUB_S(PI_INT_MASK1_B, mask[1]);
}
}
void __init arch_init_irq(void)
{
mips_cpu_irq_init();
ip27_hub_irq_init();
irq_set_percpu_devid(IP27_HUB_PEND0_IRQ);
irq_set_chained_handler(IP27_HUB_PEND0_IRQ, ip27_do_irq_mask0);
irq_set_percpu_devid(IP27_HUB_PEND1_IRQ);
irq_set_chained_handler(IP27_HUB_PEND1_IRQ, ip27_do_irq_mask1);
}