Merge tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem patches
for 4.15-rc1.
There are small changes all over here, hyperv driver updates, pcmcia
driver updates, w1 driver updats, vme driver updates, nvmem driver
updates, and lots of other little one-off driver updates as well. The
shortlog has the full details.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
VME: Return -EBUSY when DMA list in use
w1: keep balance of mutex locks and refcnts
MAINTAINERS: Update VME subsystem tree.
nvmem: sunxi-sid: add support for A64/H5's SID controller
nvmem: imx-ocotp: Update module description
nvmem: imx-ocotp: Enable i.MX7D OTP write support
nvmem: imx-ocotp: Add i.MX7D timing write clock setup support
nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function
nvmem: imx-ocotp: Add support for banked OTP addressing
nvmem: imx-ocotp: Pass parameters via a struct
nvmem: imx-ocotp: Restrict OTP write to IMX6 processors
nvmem: uniphier: add UniPhier eFuse driver
dt-bindings: nvmem: add description for UniPhier eFuse
nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset
nvmem: qfprom: fix different address space warnings of sparse
nvmem: mtk-efuse: fix different address space warnings of sparse
nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it
nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it
thunderbolt: tb: fix use after free in tb_activate_pcie_devices
MAINTAINERS: Add git tree for Thunderbolt development
...
diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus
index 5d0125f7..d4077cc 100644
--- a/Documentation/ABI/stable/sysfs-bus-vmbus
+++ b/Documentation/ABI/stable/sysfs-bus-vmbus
@@ -41,3 +41,73 @@
Contact: K. Y. Srinivasan <kys@microsoft.com>
Description: The 16 bit vendor ID of the device
Users: tools/hv/lsvmbus and user level RDMA libraries
+
+What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: VCPU (sub)channel is affinitized to
+Users: tools/hv/lsvmbus and other debuggig tools
+
+What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: VCPU (sub)channel is affinitized to
+Users: tools/hv/lsvmbus and other debuggig tools
+
+What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/in_mask
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Inbound channel signaling state
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/latency
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Channel signaling latency
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/out_mask
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Outbound channel signaling state
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/pending
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Channel interrupt pending state
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/read_avail
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Bytes availabble to read
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/write_avail
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Bytes availabble to write
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/events
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Number of times we have signaled the host
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/interrupts
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Number of times we have taken an interrupt (incoming)
+Users: Debugging tools
diff --git a/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17
new file mode 100644
index 0000000..d301e70
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17
@@ -0,0 +1,21 @@
+What: /sys/bus/w1/devices/19-<id>/speed
+Date: Sep 2017
+KernelVersion: 4.14
+Contact: Jan Kandziora <jjj@gmx.de>
+Description: When written, this file sets the I2C speed on the connected
+ DS28E17 chip. When read, it reads the current setting from
+ the DS28E17 chip.
+ Valid values: 100, 400, 900 [kBaud].
+ Default 100, can be set by w1_ds28e17.speed= module parameter.
+Users: w1_ds28e17 driver
+
+What: /sys/bus/w1/devices/19-<id>/stretch
+Date: Sep 2017
+KernelVersion: 4.14
+Contact: Jan Kandziora <jjj@gmx.de>
+Description: When written, this file sets the multiplier used to calculate
+ the busy timeout for I2C operations on the connected DS28E17
+ chip. When read, returns the current setting.
+ Valid values: 1 to 9.
+ Default 1, can be set by w1_ds28e17.stretch= module parameter.
+Users: w1_ds28e17 driver
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
index 081c49c..d695437 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
@@ -5,6 +5,7 @@
"allwinner,sun4i-a10-sid"
"allwinner,sun7i-a20-sid"
"allwinner,sun8i-h3-sid"
+ "allwinner,sun50i-a64-sid"
- reg: Should contain registers location and length
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
index fafd85b..e3298e1 100644
--- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
+++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
@@ -1,4 +1,4 @@
-= Amlogic eFuse device tree bindings =
+= Amlogic Meson GX eFuse device tree bindings =
Required properties:
- compatible: should be "amlogic,meson-gxbb-efuse"
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt
new file mode 100644
index 0000000..a3c6395
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt
@@ -0,0 +1,22 @@
+Amlogic Meson6/Meson8/Meson8b efuse
+
+Required Properties:
+- compatible: depending on the SoC this should be one of:
+ - "amlogic,meson6-efuse"
+ - "amlogic,meson8-efuse"
+ - "amlogic,meson8b-efuse"
+- reg: base address and size of the efuse registers
+- clocks: a reference to the efuse core gate clock
+- clock-names: must be "core"
+
+All properties and sub-nodes as well as the consumer bindings
+defined in nvmem.txt in this directory are also supported.
+
+
+Example:
+ efuse: nvmem@0 {
+ compatible = "amlogic,meson8-efuse";
+ reg = <0x0 0x2000>;
+ clocks = <&clkc CLKID_EFUSE>;
+ clock-names = "core";
+ };
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
index 1ff02afd..60bec47 100644
--- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
+++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
@@ -6,6 +6,7 @@
- "rockchip,rk3188-efuse" - for RK3188 SoCs.
- "rockchip,rk3228-efuse" - for RK3228 SoCs.
- "rockchip,rk3288-efuse" - for RK3288 SoCs.
+ - "rockchip,rk3368-efuse" - for RK3368 SoCs.
- "rockchip,rk3399-efuse" - for RK3399 SoCs.
- reg: Should contain the registers location and exact eFuse size
- clocks: Should be the clock id of eFuse
diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt
new file mode 100644
index 0000000..20bc49b
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt
@@ -0,0 +1,20 @@
+Device tree bindings for Low Power General Purpose Register found in i.MX6Q/D
+Secure Non-Volatile Storage.
+
+This DT node should be represented as a sub-node of a "syscon",
+"simple-mfd" node.
+
+Required properties:
+- compatible: should be one of the fallowing variants:
+ "fsl,imx6q-snvs-lpgpr" for Freescale i.MX6Q/D/DL/S
+ "fsl,imx6ul-snvs-lpgpr" for Freescale i.MX6UL
+
+Example:
+snvs: snvs@020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
+
+ snvs_lpgpr: snvs-lpgpr {
+ compatible = "fsl,imx6q-snvs-lpgpr";
+ };
+};
diff --git a/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt b/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt
new file mode 100644
index 0000000..eccf490
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt
@@ -0,0 +1,49 @@
+= UniPhier eFuse device tree bindings =
+
+This UniPhier eFuse must be under soc-glue.
+
+Required properties:
+- compatible: should be "socionext,uniphier-efuse"
+- reg: should contain the register location and length
+
+= Data cells =
+Are child nodes of efuse, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+ soc-glue@5f900000 {
+ compatible = "socionext,uniphier-ld20-soc-glue-debug",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5f900000 0x2000>;
+
+ efuse@100 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x100 0x28>;
+ };
+
+ efuse@200 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x200 0x68>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* Data cells */
+ usb_mon: usb-mon@54 {
+ reg = <0x54 0xc>;
+ };
+ };
+ };
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+Example:
+
+ usb {
+ ...
+ nvmem-cells = <&usb_mon>;
+ nvmem-cell-names = "usb_mon";
+ }
diff --git a/Documentation/trace/coresight-cpu-debug.txt b/Documentation/trace/coresight-cpu-debug.txt
index b3da1f9..2b9b51c 100644
--- a/Documentation/trace/coresight-cpu-debug.txt
+++ b/Documentation/trace/coresight-cpu-debug.txt
@@ -149,11 +149,23 @@
At the runtime you can disable idle states with below methods:
-Set latency request to /dev/cpu_dma_latency to disable all CPUs specific idle
-states (if latency = 0uS then disable all idle states):
-# echo "what_ever_latency_you_need_in_uS" > /dev/cpu_dma_latency
+It is possible to disable CPU idle states by way of the PM QoS
+subsystem, more specifically by using the "/dev/cpu_dma_latency"
+interface (see Documentation/power/pm_qos_interface.txt for more
+details). As specified in the PM QoS documentation the requested
+parameter will stay in effect until the file descriptor is released.
+For example:
-Disable specific CPU's specific idle state:
+# exec 3<> /dev/cpu_dma_latency; echo 0 >&3
+...
+Do some work...
+...
+# exec 3<>-
+
+The same can also be done from an application program.
+
+Disable specific CPU's specific idle state from cpuidle sysfs (see
+Documentation/cpuidle/sysfs.txt):
# echo 1 > /sys/devices/system/cpu/cpu$cpu/cpuidle/state$state/disable
diff --git a/Documentation/w1/slaves/00-INDEX b/Documentation/w1/slaves/00-INDEX
index 8d76718..68946f8 100644
--- a/Documentation/w1/slaves/00-INDEX
+++ b/Documentation/w1/slaves/00-INDEX
@@ -10,3 +10,5 @@
- The Maxim/Dallas Semiconductor ds2438 smart battery monitor.
w1_ds28e04
- The Maxim/Dallas Semiconductor ds28e04 eeprom.
+w1_ds28e17
+ - The Maxim/Dallas Semiconductor ds28e17 1-Wire-to-I2C Master Bridge.
diff --git a/Documentation/w1/slaves/w1_ds28e17 b/Documentation/w1/slaves/w1_ds28e17
new file mode 100644
index 0000000..7fcfad5
--- /dev/null
+++ b/Documentation/w1/slaves/w1_ds28e17
@@ -0,0 +1,68 @@
+Kernel driver w1_ds28e17
+========================
+
+Supported chips:
+ * Maxim DS28E17 1-Wire-to-I2C Master Bridge
+
+supported family codes:
+ W1_FAMILY_DS28E17 0x19
+
+Author: Jan Kandziora <jjj@gmx.de>
+
+
+Description
+-----------
+The DS28E17 is a Onewire slave device which acts as an I2C bus master.
+
+This driver creates a new I2C bus for any DS28E17 device detected. I2C buses
+come and go as the DS28E17 devices come and go. I2C slave devices connected to
+a DS28E17 can be accessed by the kernel or userspace tools as if they were
+connected to a "native" I2C bus master.
+
+
+An udev rule like the following
+-------------------------------------------------------------------------------
+SUBSYSTEM=="i2c-dev", KERNEL=="i2c-[0-9]*", ATTRS{name}=="w1-19-*", \
+ SYMLINK+="i2c-$attr{name}"
+-------------------------------------------------------------------------------
+may be used to create stable /dev/i2c- entries based on the unique id of the
+DS28E17 chip.
+
+
+Driver parameters are:
+
+speed:
+ This sets up the default I2C speed a DS28E17 get configured for as soon
+ it is connected. The power-on default of the DS28E17 is 400kBaud, but
+ chips may come and go on the Onewire bus without being de-powered and
+ as soon the "w1_ds28e17" driver notices a freshly connected, or
+ reconnected DS28E17 device on the Onewire bus, it will re-apply this
+ setting.
+
+ Valid values are 100, 400, 900 [kBaud]. Any other value means to leave
+ alone the current DS28E17 setting on detect. The default value is 100.
+
+stretch:
+ This sets up the default stretch value used for freshly connected
+ DS28E17 devices. It is a multiplier used on the calculation of the busy
+ wait time for an I2C transfer. This is to account for I2C slave devices
+ which make heavy use of the I2C clock stretching feature and thus, the
+ needed timeout cannot be pre-calculated correctly. As the w1_ds28e17
+ driver checks the DS28E17's busy flag in a loop after the precalculated
+ wait time, it should be hardly needed to tweak this setting.
+
+ Leave it at 1 unless you get ETIMEDOUT errors and a "w1_slave_driver
+ 19-00000002dbd8: busy timeout" in the kernel log.
+
+ Valid values are 1 to 9. The default is 1.
+
+
+The driver creates sysfs files /sys/bus/w1/devices/19-<id>/speed and
+/sys/bus/w1/devices/19-<id>/stretch for each device, preloaded with the default
+settings from the driver parameters. They may be changed anytime. In addition a
+directory /sys/bus/w1/devices/19-<id>/i2c-<nnn> for the I2C bus master sysfs
+structure is created.
+
+
+See https://github.com/ianka/w1_ds28e17 for even more information.
+
diff --git a/MAINTAINERS b/MAINTAINERS
index d327267..7f9c4f3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5474,7 +5474,7 @@
FPGA MANAGER FRAMEWORK
M: Alan Tull <atull@kernel.org>
-R: Moritz Fischer <mdf@kernel.org>
+M: Moritz Fischer <mdf@kernel.org>
L: linux-fpga@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/atull/linux-fpga.git
@@ -13390,6 +13390,7 @@
M: Michael Jamet <michael.jamet@intel.com>
M: Mika Westerberg <mika.westerberg@linux.intel.com>
M: Yehezkel Bernat <yehezkel.bernat@intel.com>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git
S: Maintained
F: drivers/thunderbolt/
F: include/linux/thunderbolt.h
@@ -14485,7 +14486,7 @@
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: devel@driverdev.osuosl.org
S: Maintained
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
F: Documentation/driver-api/vme.rst
F: drivers/staging/vme/
F: drivers/vme/
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index a0b86cf..189a398 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -210,9 +210,10 @@
}
EXPORT_SYMBOL_GPL(hyperv_cleanup);
-void hyperv_report_panic(struct pt_regs *regs)
+void hyperv_report_panic(struct pt_regs *regs, long err)
{
static bool panic_reported;
+ u64 guest_id;
/*
* We prefer to report panic on 'die' chain as we have proper
@@ -223,11 +224,13 @@
return;
panic_reported = true;
- wrmsrl(HV_X64_MSR_CRASH_P0, regs->ip);
- wrmsrl(HV_X64_MSR_CRASH_P1, regs->ax);
- wrmsrl(HV_X64_MSR_CRASH_P2, regs->bx);
- wrmsrl(HV_X64_MSR_CRASH_P3, regs->cx);
- wrmsrl(HV_X64_MSR_CRASH_P4, regs->dx);
+ rdmsrl(HV_X64_MSR_GUEST_OS_ID, guest_id);
+
+ wrmsrl(HV_X64_MSR_CRASH_P0, err);
+ wrmsrl(HV_X64_MSR_CRASH_P1, guest_id);
+ wrmsrl(HV_X64_MSR_CRASH_P2, regs->ip);
+ wrmsrl(HV_X64_MSR_CRASH_P3, regs->ax);
+ wrmsrl(HV_X64_MSR_CRASH_P4, regs->sp);
/*
* Let Hyper-V know there is crash data available
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 581bb54..5400add 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -311,7 +311,7 @@
void hyperv_init(void);
void hyperv_setup_mmu_ops(void);
void hyper_alloc_mmu(void);
-void hyperv_report_panic(struct pt_regs *regs);
+void hyperv_report_panic(struct pt_regs *regs, long err);
bool hv_is_hypercall_page_setup(void);
void hyperv_cleanup(void);
#else /* CONFIG_HYPERV */
diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index 7255f94..a73596a 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -2192,7 +2192,7 @@
off_start,
offp - off_start);
if (!parent) {
- pr_err("transaction release %d bad parent offset",
+ pr_err("transaction release %d bad parent offset\n",
debug_id);
continue;
}
diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c
index c2819a3..6f6f745 100644
--- a/drivers/android/binder_alloc.c
+++ b/drivers/android/binder_alloc.c
@@ -186,12 +186,12 @@
}
static int binder_update_page_range(struct binder_alloc *alloc, int allocate,
- void *start, void *end,
- struct vm_area_struct *vma)
+ void *start, void *end)
{
void *page_addr;
unsigned long user_page_addr;
struct binder_lru_page *page;
+ struct vm_area_struct *vma = NULL;
struct mm_struct *mm = NULL;
bool need_mm = false;
@@ -215,7 +215,7 @@
}
}
- if (!vma && need_mm && mmget_not_zero(alloc->vma_vm_mm))
+ if (need_mm && mmget_not_zero(alloc->vma_vm_mm))
mm = alloc->vma_vm_mm;
if (mm) {
@@ -437,7 +437,7 @@
if (end_page_addr > has_page_addr)
end_page_addr = has_page_addr;
ret = binder_update_page_range(alloc, 1,
- (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr, NULL);
+ (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr);
if (ret)
return ERR_PTR(ret);
@@ -478,7 +478,7 @@
err_alloc_buf_struct_failed:
binder_update_page_range(alloc, 0,
(void *)PAGE_ALIGN((uintptr_t)buffer->data),
- end_page_addr, NULL);
+ end_page_addr);
return ERR_PTR(-ENOMEM);
}
@@ -562,8 +562,7 @@
alloc->pid, buffer->data,
prev->data, next ? next->data : NULL);
binder_update_page_range(alloc, 0, buffer_start_page(buffer),
- buffer_start_page(buffer) + PAGE_SIZE,
- NULL);
+ buffer_start_page(buffer) + PAGE_SIZE);
}
list_del(&buffer->entry);
kfree(buffer);
@@ -600,8 +599,7 @@
binder_update_page_range(alloc, 0,
(void *)PAGE_ALIGN((uintptr_t)buffer->data),
- (void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK),
- NULL);
+ (void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK));
rb_erase(&buffer->rb_node, &alloc->allocated_buffers);
buffer->free = 1;
@@ -984,7 +982,7 @@
return ret;
}
-struct shrinker binder_shrinker = {
+static struct shrinker binder_shrinker = {
.count_objects = binder_shrink_count,
.scan_objects = binder_shrink_scan,
.seeks = DEFAULT_SEEKS,
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index cd53771..370e0a6 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -659,9 +659,9 @@
* is already doing that for you.
*/
-static void monitor_card(unsigned long p)
+static void monitor_card(struct timer_list *t)
{
- struct cm4000_dev *dev = (struct cm4000_dev *) p;
+ struct cm4000_dev *dev = from_timer(dev, t, timer);
unsigned int iobase = dev->p_dev->resource[0]->start;
unsigned short s;
struct ptsreq ptsreq;
@@ -1374,7 +1374,7 @@
DEBUGP(3, dev, "-> start_monitor\n");
if (!dev->monitor_running) {
DEBUGP(5, dev, "create, init and add timer\n");
- setup_timer(&dev->timer, monitor_card, (unsigned long)dev);
+ timer_setup(&dev->timer, monitor_card, 0);
dev->monitor_running = 1;
mod_timer(&dev->timer, jiffies);
} else
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 382c864..9a1aaf53 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -104,9 +104,9 @@
/* poll the device fifo status register. not to be confused with
* the poll syscall. */
-static void cm4040_do_poll(unsigned long dummy)
+static void cm4040_do_poll(struct timer_list *t)
{
- struct reader_dev *dev = (struct reader_dev *) dummy;
+ struct reader_dev *dev = from_timer(dev, t, poll_timer);
unsigned int obs = xinb(dev->p_dev->resource[0]->start
+ REG_OFFSET_BUFFER_STATUS);
@@ -465,7 +465,6 @@
link->open = 1;
- dev->poll_timer.data = (unsigned long) dev;
mod_timer(&dev->poll_timer, jiffies + POLL_PERIOD);
DEBUGP(2, dev, "<- cm4040_open (successfully)\n");
@@ -585,7 +584,7 @@
init_waitqueue_head(&dev->poll_wait);
init_waitqueue_head(&dev->read_wait);
init_waitqueue_head(&dev->write_wait);
- setup_timer(&dev->poll_timer, cm4040_do_poll, 0);
+ timer_setup(&dev->poll_timer, cm4040_do_poll, 0);
ret = reader_config(link, i);
if (ret) {
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 62be953..aa502e9 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -375,7 +375,7 @@
static void hdlc_mode(MGSLPC_INFO *info);
static void async_mode(MGSLPC_INFO *info);
-static void tx_timeout(unsigned long context);
+static void tx_timeout(struct timer_list *t);
static int carrier_raised(struct tty_port *port);
static void dtr_rts(struct tty_port *port, int onoff);
@@ -1289,7 +1289,7 @@
memset(&info->icount, 0, sizeof(info->icount));
- setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
+ timer_setup(&info->tx_timer, tx_timeout, 0);
/* Allocate and claim adapter resources */
retval = claim_resources(info);
@@ -3846,9 +3846,9 @@
/* HDLC frame time out
* update stats and do tx completion processing
*/
-static void tx_timeout(unsigned long context)
+static void tx_timeout(struct timer_list *t)
{
- MGSLPC_INFO *info = (MGSLPC_INFO*)context;
+ MGSLPC_INFO *info = from_timer(info, t, tx_timer);
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
diff --git a/drivers/fpga/xilinx-pr-decoupler.c b/drivers/fpga/xilinx-pr-decoupler.c
index e359930..0d77430 100644
--- a/drivers/fpga/xilinx-pr-decoupler.c
+++ b/drivers/fpga/xilinx-pr-decoupler.c
@@ -79,7 +79,7 @@
return !status;
}
-static struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = {
+static const struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = {
.enable_set = xlnx_pr_decoupler_enable_set,
.enable_show = xlnx_pr_decoupler_enable_show,
};
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 4ea63d9..e318bf8 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -185,7 +185,7 @@
return 0;
}
-int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
+static int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
{
struct fsi_master *master = slave->master;
uint32_t irq, stat;
@@ -215,8 +215,8 @@
static int fsi_slave_set_smode(struct fsi_master *master, int link, int id);
-int fsi_slave_handle_error(struct fsi_slave *slave, bool write, uint32_t addr,
- size_t size)
+static int fsi_slave_handle_error(struct fsi_slave *slave, bool write,
+ uint32_t addr, size_t size)
{
struct fsi_master *master = slave->master;
int rc, link;
diff --git a/drivers/hv/Makefile b/drivers/hv/Makefile
index e7b1d79..14c2278 100644
--- a/drivers/hv/Makefile
+++ b/drivers/hv/Makefile
@@ -3,7 +3,9 @@
obj-$(CONFIG_HYPERV_UTILS) += hv_utils.o
obj-$(CONFIG_HYPERV_BALLOON) += hv_balloon.o
+CFLAGS_hv_trace.o = -I$(src)
+
hv_vmbus-y := vmbus_drv.o \
hv.o connection.o channel.o \
- channel_mgmt.o ring_buffer.o
+ channel_mgmt.o ring_buffer.o hv_trace.o
hv_utils-y := hv_util.o hv_kvp.o hv_snapshot.o hv_fcopy.o hv_utils_transport.o
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 894b67a..19f0cf3 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -43,6 +43,8 @@
{
struct hv_monitor_page *monitorpage;
+ trace_vmbus_setevent(channel);
+
/*
* For channels marked as in "low latency" mode
* bypass the monitor page mechanism.
@@ -185,6 +187,8 @@
ret = vmbus_post_msg(open_msg,
sizeof(struct vmbus_channel_open_channel), true);
+ trace_vmbus_open(open_msg, ret);
+
if (ret != 0) {
err = ret;
goto error_clean_msglist;
@@ -234,13 +238,18 @@
const uuid_le *shv_host_servie_id)
{
struct vmbus_channel_tl_connect_request conn_msg;
+ int ret;
memset(&conn_msg, 0, sizeof(conn_msg));
conn_msg.header.msgtype = CHANNELMSG_TL_CONNECT_REQUEST;
conn_msg.guest_endpoint_id = *shv_guest_servie_id;
conn_msg.host_service_id = *shv_host_servie_id;
- return vmbus_post_msg(&conn_msg, sizeof(conn_msg), true);
+ ret = vmbus_post_msg(&conn_msg, sizeof(conn_msg), true);
+
+ trace_vmbus_send_tl_connect_request(&conn_msg, ret);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(vmbus_send_tl_connect_request);
@@ -433,6 +442,9 @@
ret = vmbus_post_msg(gpadlmsg, msginfo->msgsize -
sizeof(*msginfo), true);
+
+ trace_vmbus_establish_gpadl_header(gpadlmsg, ret);
+
if (ret != 0)
goto cleanup;
@@ -448,6 +460,9 @@
ret = vmbus_post_msg(gpadl_body,
submsginfo->msgsize - sizeof(*submsginfo),
true);
+
+ trace_vmbus_establish_gpadl_body(gpadl_body, ret);
+
if (ret != 0)
goto cleanup;
@@ -511,6 +526,8 @@
ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown),
true);
+ trace_vmbus_teardown_gpadl(msg, ret);
+
if (ret)
goto post_msg_err;
@@ -589,6 +606,8 @@
ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_close_channel),
true);
+ trace_vmbus_close_internal(msg, ret);
+
if (ret) {
pr_err("Close failed: close post msg return is %d\n", ret);
/*
@@ -745,6 +764,7 @@
desc.dataoffset8 = descsize >> 3; /* in 8-bytes granularity */
desc.length8 = (u16)(packetlen_aligned >> 3);
desc.transactionid = requestid;
+ desc.reserved = 0;
desc.rangecount = pagecount;
for (i = 0; i < pagecount; i++) {
@@ -788,6 +808,7 @@
desc->dataoffset8 = desc_size >> 3; /* in 8-bytes granularity */
desc->length8 = (u16)(packetlen_aligned >> 3);
desc->transactionid = requestid;
+ desc->reserved = 0;
desc->rangecount = 1;
bufferlist[0].iov_base = desc;
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 379b0df..ec5454f 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -350,7 +350,7 @@
{
tasklet_kill(&channel->callback_event);
- kfree_rcu(channel, rcu);
+ kobject_put(&channel->kobj);
}
static void percpu_channel_enq(void *arg)
@@ -373,12 +373,15 @@
static void vmbus_release_relid(u32 relid)
{
struct vmbus_channel_relid_released msg;
+ int ret;
memset(&msg, 0, sizeof(struct vmbus_channel_relid_released));
msg.child_relid = relid;
msg.header.msgtype = CHANNELMSG_RELID_RELEASED;
- vmbus_post_msg(&msg, sizeof(struct vmbus_channel_relid_released),
- true);
+ ret = vmbus_post_msg(&msg, sizeof(struct vmbus_channel_relid_released),
+ true);
+
+ trace_vmbus_release_relid(&msg, ret);
}
void hv_process_channel_removal(u32 relid)
@@ -520,6 +523,14 @@
newchannel->state = CHANNEL_OPEN_STATE;
if (!fnew) {
+ struct hv_device *dev
+ = newchannel->primary_channel->device_obj;
+
+ if (vmbus_add_channel_kobj(dev, newchannel)) {
+ atomic_dec(&vmbus_connection.offer_in_progress);
+ goto err_free_chan;
+ }
+
if (channel->sc_creation_callback != NULL)
channel->sc_creation_callback(newchannel);
newchannel->probe_done = true;
@@ -805,6 +816,8 @@
offer = (struct vmbus_channel_offer_channel *)hdr;
+ trace_vmbus_onoffer(offer);
+
/* Allocate the channel object and save this offer. */
newchannel = alloc_channel();
if (!newchannel) {
@@ -846,6 +859,8 @@
rescind = (struct vmbus_channel_rescind_offer *)hdr;
+ trace_vmbus_onoffer_rescind(rescind);
+
/*
* The offer msg and the corresponding rescind msg
* from the host are guranteed to be ordered -
@@ -974,6 +989,8 @@
result = (struct vmbus_channel_open_result *)hdr;
+ trace_vmbus_onopen_result(result);
+
/*
* Find the open msg, copy the result and signal/unblock the wait event
*/
@@ -1018,6 +1035,8 @@
gpadlcreated = (struct vmbus_channel_gpadl_created *)hdr;
+ trace_vmbus_ongpadl_created(gpadlcreated);
+
/*
* Find the establish msg, copy the result and signal/unblock the wait
* event
@@ -1066,6 +1085,8 @@
gpadl_torndown = (struct vmbus_channel_gpadl_torndown *)hdr;
+ trace_vmbus_ongpadl_torndown(gpadl_torndown);
+
/*
* Find the open msg, copy the result and signal/unblock the wait event
*/
@@ -1109,6 +1130,9 @@
unsigned long flags;
version_response = (struct vmbus_channel_version_response *)hdr;
+
+ trace_vmbus_onversion_response(version_response);
+
spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
list_for_each_entry(msginfo, &vmbus_connection.chn_msg_list,
@@ -1168,6 +1192,8 @@
hdr = (struct vmbus_channel_message_header *)msg->u.payload;
size = msg->header.payload_size;
+ trace_vmbus_on_message(hdr);
+
if (hdr->msgtype >= CHANNELMSG_COUNT) {
pr_err("Received invalid channel message type %d size %d\n",
hdr->msgtype, size);
@@ -1201,9 +1227,11 @@
msg->msgtype = CHANNELMSG_REQUESTOFFERS;
-
ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_message_header),
true);
+
+ trace_vmbus_request_offers(ret);
+
if (ret != 0) {
pr_err("Unable to request offers - %d\n", ret);
diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c
index f41901f..447371f 100644
--- a/drivers/hv/connection.c
+++ b/drivers/hv/connection.c
@@ -117,6 +117,9 @@
ret = vmbus_post_msg(msg,
sizeof(struct vmbus_channel_initiate_contact),
true);
+
+ trace_vmbus_negotiate_version(msg, ret);
+
if (ret != 0) {
spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
list_del(&msginfo->msglistentry);
@@ -319,6 +322,8 @@
struct vmbus_channel *channel = (void *) data;
unsigned long time_limit = jiffies + 2;
+ trace_vmbus_on_event(channel);
+
do {
void (*callback_fn)(void *);
@@ -409,6 +414,8 @@
if (!channel->is_dedicated_interrupt)
vmbus_send_interrupt(child_relid);
+ ++channel->sig_events;
+
hv_do_fast_hypercall8(HVCALL_SIGNAL_EVENT, channel->sig_event);
}
EXPORT_SYMBOL_GPL(vmbus_set_event);
diff --git a/drivers/hv/hv_trace.c b/drivers/hv/hv_trace.c
new file mode 100644
index 0000000..df47acd
--- /dev/null
+++ b/drivers/hv/hv_trace.c
@@ -0,0 +1,4 @@
+#include "hyperv_vmbus.h"
+
+#define CREATE_TRACE_POINTS
+#include "hv_trace.h"
diff --git a/drivers/hv/hv_trace.h b/drivers/hv/hv_trace.h
new file mode 100644
index 0000000..d635ee9
--- /dev/null
+++ b/drivers/hv/hv_trace.h
@@ -0,0 +1,327 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM hyperv
+
+#if !defined(_HV_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _HV_TRACE_H
+
+#include <linux/tracepoint.h>
+
+DECLARE_EVENT_CLASS(vmbus_hdr_msg,
+ TP_PROTO(const struct vmbus_channel_message_header *hdr),
+ TP_ARGS(hdr),
+ TP_STRUCT__entry(__field(unsigned int, msgtype)),
+ TP_fast_assign(__entry->msgtype = hdr->msgtype;),
+ TP_printk("msgtype=%u", __entry->msgtype)
+);
+
+DEFINE_EVENT(vmbus_hdr_msg, vmbus_on_msg_dpc,
+ TP_PROTO(const struct vmbus_channel_message_header *hdr),
+ TP_ARGS(hdr)
+);
+
+DEFINE_EVENT(vmbus_hdr_msg, vmbus_on_message,
+ TP_PROTO(const struct vmbus_channel_message_header *hdr),
+ TP_ARGS(hdr)
+);
+
+TRACE_EVENT(vmbus_onoffer,
+ TP_PROTO(const struct vmbus_channel_offer_channel *offer),
+ TP_ARGS(offer),
+ TP_STRUCT__entry(
+ __field(u32, child_relid)
+ __field(u8, monitorid)
+ __field(u16, is_ddc_int)
+ __field(u32, connection_id)
+ __array(char, if_type, 16)
+ __array(char, if_instance, 16)
+ __field(u16, chn_flags)
+ __field(u16, mmio_mb)
+ __field(u16, sub_idx)
+ ),
+ TP_fast_assign(__entry->child_relid = offer->child_relid;
+ __entry->monitorid = offer->monitorid;
+ __entry->is_ddc_int = offer->is_dedicated_interrupt;
+ __entry->connection_id = offer->connection_id;
+ memcpy(__entry->if_type,
+ &offer->offer.if_type.b, 16);
+ memcpy(__entry->if_instance,
+ &offer->offer.if_instance.b, 16);
+ __entry->chn_flags = offer->offer.chn_flags;
+ __entry->mmio_mb = offer->offer.mmio_megabytes;
+ __entry->sub_idx = offer->offer.sub_channel_index;
+ ),
+ TP_printk("child_relid 0x%x, monitorid 0x%x, is_dedicated %d, "
+ "connection_id 0x%x, if_type %pUl, if_instance %pUl, "
+ "chn_flags 0x%x, mmio_megabytes %d, sub_channel_index %d",
+ __entry->child_relid, __entry->monitorid,
+ __entry->is_ddc_int, __entry->connection_id,
+ __entry->if_type, __entry->if_instance,
+ __entry->chn_flags, __entry->mmio_mb,
+ __entry->sub_idx
+ )
+ );
+
+TRACE_EVENT(vmbus_onoffer_rescind,
+ TP_PROTO(const struct vmbus_channel_rescind_offer *offer),
+ TP_ARGS(offer),
+ TP_STRUCT__entry(__field(u32, child_relid)),
+ TP_fast_assign(__entry->child_relid = offer->child_relid),
+ TP_printk("child_relid 0x%x", __entry->child_relid)
+ );
+
+TRACE_EVENT(vmbus_onopen_result,
+ TP_PROTO(const struct vmbus_channel_open_result *result),
+ TP_ARGS(result),
+ TP_STRUCT__entry(
+ __field(u32, child_relid)
+ __field(u32, openid)
+ __field(u32, status)
+ ),
+ TP_fast_assign(__entry->child_relid = result->child_relid;
+ __entry->openid = result->openid;
+ __entry->status = result->status;
+ ),
+ TP_printk("child_relid 0x%x, openid %d, status %d",
+ __entry->child_relid, __entry->openid, __entry->status
+ )
+ );
+
+TRACE_EVENT(vmbus_ongpadl_created,
+ TP_PROTO(const struct vmbus_channel_gpadl_created *gpadlcreated),
+ TP_ARGS(gpadlcreated),
+ TP_STRUCT__entry(
+ __field(u32, child_relid)
+ __field(u32, gpadl)
+ __field(u32, status)
+ ),
+ TP_fast_assign(__entry->child_relid = gpadlcreated->child_relid;
+ __entry->gpadl = gpadlcreated->gpadl;
+ __entry->status = gpadlcreated->creation_status;
+ ),
+ TP_printk("child_relid 0x%x, gpadl 0x%x, creation_status %d",
+ __entry->child_relid, __entry->gpadl, __entry->status
+ )
+ );
+
+TRACE_EVENT(vmbus_ongpadl_torndown,
+ TP_PROTO(const struct vmbus_channel_gpadl_torndown *gpadltorndown),
+ TP_ARGS(gpadltorndown),
+ TP_STRUCT__entry(__field(u32, gpadl)),
+ TP_fast_assign(__entry->gpadl = gpadltorndown->gpadl),
+ TP_printk("gpadl 0x%x", __entry->gpadl)
+ );
+
+TRACE_EVENT(vmbus_onversion_response,
+ TP_PROTO(const struct vmbus_channel_version_response *response),
+ TP_ARGS(response),
+ TP_STRUCT__entry(
+ __field(u8, ver)
+ ),
+ TP_fast_assign(__entry->ver = response->version_supported;
+ ),
+ TP_printk("version_supported %d", __entry->ver)
+ );
+
+TRACE_EVENT(vmbus_request_offers,
+ TP_PROTO(int ret),
+ TP_ARGS(ret),
+ TP_STRUCT__entry(__field(int, ret)),
+ TP_fast_assign(__entry->ret = ret),
+ TP_printk("sending ret %d", __entry->ret)
+ );
+
+TRACE_EVENT(vmbus_open,
+ TP_PROTO(const struct vmbus_channel_open_channel *msg, int ret),
+ TP_ARGS(msg, ret),
+ TP_STRUCT__entry(
+ __field(u32, child_relid)
+ __field(u32, openid)
+ __field(u32, gpadlhandle)
+ __field(u32, target_vp)
+ __field(u32, offset)
+ __field(int, ret)
+ ),
+ TP_fast_assign(
+ __entry->child_relid = msg->child_relid;
+ __entry->openid = msg->openid;
+ __entry->gpadlhandle = msg->ringbuffer_gpadlhandle;
+ __entry->target_vp = msg->target_vp;
+ __entry->offset = msg->downstream_ringbuffer_pageoffset;
+ __entry->ret = ret;
+ ),
+ TP_printk("sending child_relid 0x%x, openid %d, "
+ "gpadlhandle 0x%x, target_vp 0x%x, offset 0x%x, ret %d",
+ __entry->child_relid, __entry->openid,
+ __entry->gpadlhandle, __entry->target_vp,
+ __entry->offset, __entry->ret
+ )
+ );
+
+TRACE_EVENT(vmbus_close_internal,
+ TP_PROTO(const struct vmbus_channel_close_channel *msg, int ret),
+ TP_ARGS(msg, ret),
+ TP_STRUCT__entry(
+ __field(u32, child_relid)
+ __field(int, ret)
+ ),
+ TP_fast_assign(
+ __entry->child_relid = msg->child_relid;
+ __entry->ret = ret;
+ ),
+ TP_printk("sending child_relid 0x%x, ret %d", __entry->child_relid,
+ __entry->ret)
+ );
+
+TRACE_EVENT(vmbus_establish_gpadl_header,
+ TP_PROTO(const struct vmbus_channel_gpadl_header *msg, int ret),
+ TP_ARGS(msg, ret),
+ TP_STRUCT__entry(
+ __field(u32, child_relid)
+ __field(u32, gpadl)
+ __field(u16, range_buflen)
+ __field(u16, rangecount)
+ __field(int, ret)
+ ),
+ TP_fast_assign(
+ __entry->child_relid = msg->child_relid;
+ __entry->gpadl = msg->gpadl;
+ __entry->range_buflen = msg->range_buflen;
+ __entry->rangecount = msg->rangecount;
+ __entry->ret = ret;
+ ),
+ TP_printk("sending child_relid 0x%x, gpadl 0x%x, range_buflen %d "
+ "rangecount %d, ret %d",
+ __entry->child_relid, __entry->gpadl,
+ __entry->range_buflen, __entry->rangecount, __entry->ret
+ )
+ );
+
+TRACE_EVENT(vmbus_establish_gpadl_body,
+ TP_PROTO(const struct vmbus_channel_gpadl_body *msg, int ret),
+ TP_ARGS(msg, ret),
+ TP_STRUCT__entry(
+ __field(u32, msgnumber)
+ __field(u32, gpadl)
+ __field(int, ret)
+ ),
+ TP_fast_assign(
+ __entry->msgnumber = msg->msgnumber;
+ __entry->gpadl = msg->gpadl;
+ __entry->ret = ret;
+ ),
+ TP_printk("sending msgnumber %d, gpadl 0x%x, ret %d",
+ __entry->msgnumber, __entry->gpadl, __entry->ret
+ )
+ );
+
+TRACE_EVENT(vmbus_teardown_gpadl,
+ TP_PROTO(const struct vmbus_channel_gpadl_teardown *msg, int ret),
+ TP_ARGS(msg, ret),
+ TP_STRUCT__entry(
+ __field(u32, child_relid)
+ __field(u32, gpadl)
+ __field(int, ret)
+ ),
+ TP_fast_assign(
+ __entry->child_relid = msg->child_relid;
+ __entry->gpadl = msg->gpadl;
+ __entry->ret = ret;
+ ),
+ TP_printk("sending child_relid 0x%x, gpadl 0x%x, ret %d",
+ __entry->child_relid, __entry->gpadl, __entry->ret
+ )
+ );
+
+TRACE_EVENT(vmbus_negotiate_version,
+ TP_PROTO(const struct vmbus_channel_initiate_contact *msg, int ret),
+ TP_ARGS(msg, ret),
+ TP_STRUCT__entry(
+ __field(u32, ver)
+ __field(u32, target_vcpu)
+ __field(int, ret)
+ __field(u64, int_page)
+ __field(u64, mon_page1)
+ __field(u64, mon_page2)
+ ),
+ TP_fast_assign(
+ __entry->ver = msg->vmbus_version_requested;
+ __entry->target_vcpu = msg->target_vcpu;
+ __entry->int_page = msg->interrupt_page;
+ __entry->mon_page1 = msg->monitor_page1;
+ __entry->mon_page2 = msg->monitor_page2;
+ __entry->ret = ret;
+ ),
+ TP_printk("sending vmbus_version_requested %d, target_vcpu 0x%x, "
+ "pages %llx:%llx:%llx, ret %d",
+ __entry->ver, __entry->target_vcpu, __entry->int_page,
+ __entry->mon_page1, __entry->mon_page2, __entry->ret
+ )
+ );
+
+TRACE_EVENT(vmbus_release_relid,
+ TP_PROTO(const struct vmbus_channel_relid_released *msg, int ret),
+ TP_ARGS(msg, ret),
+ TP_STRUCT__entry(
+ __field(u32, child_relid)
+ __field(int, ret)
+ ),
+ TP_fast_assign(
+ __entry->child_relid = msg->child_relid;
+ __entry->ret = ret;
+ ),
+ TP_printk("sending child_relid 0x%x, ret %d",
+ __entry->child_relid, __entry->ret
+ )
+ );
+
+TRACE_EVENT(vmbus_send_tl_connect_request,
+ TP_PROTO(const struct vmbus_channel_tl_connect_request *msg,
+ int ret),
+ TP_ARGS(msg, ret),
+ TP_STRUCT__entry(
+ __array(char, guest_id, 16)
+ __array(char, host_id, 16)
+ __field(int, ret)
+ ),
+ TP_fast_assign(
+ memcpy(__entry->guest_id, &msg->guest_endpoint_id.b, 16);
+ memcpy(__entry->host_id, &msg->host_service_id.b, 16);
+ __entry->ret = ret;
+ ),
+ TP_printk("sending guest_endpoint_id %pUl, host_service_id %pUl, "
+ "ret %d",
+ __entry->guest_id, __entry->host_id, __entry->ret
+ )
+ );
+
+DECLARE_EVENT_CLASS(vmbus_channel,
+ TP_PROTO(const struct vmbus_channel *channel),
+ TP_ARGS(channel),
+ TP_STRUCT__entry(__field(u32, relid)),
+ TP_fast_assign(__entry->relid = channel->offermsg.child_relid),
+ TP_printk("relid 0x%x", __entry->relid)
+);
+
+DEFINE_EVENT(vmbus_channel, vmbus_chan_sched,
+ TP_PROTO(const struct vmbus_channel *channel),
+ TP_ARGS(channel)
+);
+
+DEFINE_EVENT(vmbus_channel, vmbus_setevent,
+ TP_PROTO(const struct vmbus_channel *channel),
+ TP_ARGS(channel)
+);
+
+DEFINE_EVENT(vmbus_channel, vmbus_on_event,
+ TP_PROTO(const struct vmbus_channel *channel),
+ TP_ARGS(channel)
+);
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE hv_trace
+#endif /* _HV_TRACE_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index 49569f8..22300ec 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -31,6 +31,8 @@
#include <linux/hyperv.h>
#include <linux/interrupt.h>
+#include "hv_trace.h"
+
/*
* Timeout for services such as KVP and fcopy.
*/
@@ -373,6 +375,8 @@
int vmbus_device_register(struct hv_device *child_device_obj);
void vmbus_device_unregister(struct hv_device *device_obj);
+int vmbus_add_channel_kobj(struct hv_device *device_obj,
+ struct vmbus_channel *channel);
struct vmbus_channel *relid2channel(u32 relid);
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 2cd134d..76ed9a2 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -65,7 +65,7 @@
regs = current_pt_regs();
- hyperv_report_panic(regs);
+ hyperv_report_panic(regs, val);
return NOTIFY_DONE;
}
@@ -75,7 +75,7 @@
struct die_args *die = (struct die_args *)args;
struct pt_regs *regs = die->regs;
- hyperv_report_panic(regs);
+ hyperv_report_panic(regs, val);
return NOTIFY_DONE;
}
@@ -107,28 +107,30 @@
sprintf(&alias_name[i], "%02x", hv_dev->dev_type.b[i/2]);
}
-static u8 channel_monitor_group(struct vmbus_channel *channel)
+static u8 channel_monitor_group(const struct vmbus_channel *channel)
{
return (u8)channel->offermsg.monitorid / 32;
}
-static u8 channel_monitor_offset(struct vmbus_channel *channel)
+static u8 channel_monitor_offset(const struct vmbus_channel *channel)
{
return (u8)channel->offermsg.monitorid % 32;
}
-static u32 channel_pending(struct vmbus_channel *channel,
- struct hv_monitor_page *monitor_page)
+static u32 channel_pending(const struct vmbus_channel *channel,
+ const struct hv_monitor_page *monitor_page)
{
u8 monitor_group = channel_monitor_group(channel);
+
return monitor_page->trigger_group[monitor_group].pending;
}
-static u32 channel_latency(struct vmbus_channel *channel,
- struct hv_monitor_page *monitor_page)
+static u32 channel_latency(const struct vmbus_channel *channel,
+ const struct hv_monitor_page *monitor_page)
{
u8 monitor_group = channel_monitor_group(channel);
u8 monitor_offset = channel_monitor_offset(channel);
+
return monitor_page->latency[monitor_group][monitor_offset];
}
@@ -833,6 +835,8 @@
hdr = (struct vmbus_channel_message_header *)msg->u.payload;
+ trace_vmbus_on_msg_dpc(hdr);
+
if (hdr->msgtype >= CHANNELMSG_COUNT) {
WARN_ONCE(1, "unknown msgtype=%d\n", hdr->msgtype);
goto msg_handled;
@@ -942,6 +946,10 @@
if (channel->rescind)
continue;
+ trace_vmbus_chan_sched(channel);
+
+ ++channel->interrupts;
+
switch (channel->callback_mode) {
case HV_CALL_ISR:
vmbus_channel_isr(channel);
@@ -1133,6 +1141,159 @@
}
EXPORT_SYMBOL_GPL(vmbus_driver_unregister);
+
+/*
+ * Called when last reference to channel is gone.
+ */
+static void vmbus_chan_release(struct kobject *kobj)
+{
+ struct vmbus_channel *channel
+ = container_of(kobj, struct vmbus_channel, kobj);
+
+ kfree_rcu(channel, rcu);
+}
+
+struct vmbus_chan_attribute {
+ struct attribute attr;
+ ssize_t (*show)(const struct vmbus_channel *chan, char *buf);
+ ssize_t (*store)(struct vmbus_channel *chan,
+ const char *buf, size_t count);
+};
+#define VMBUS_CHAN_ATTR(_name, _mode, _show, _store) \
+ struct vmbus_chan_attribute chan_attr_##_name \
+ = __ATTR(_name, _mode, _show, _store)
+#define VMBUS_CHAN_ATTR_RW(_name) \
+ struct vmbus_chan_attribute chan_attr_##_name = __ATTR_RW(_name)
+#define VMBUS_CHAN_ATTR_RO(_name) \
+ struct vmbus_chan_attribute chan_attr_##_name = __ATTR_RO(_name)
+#define VMBUS_CHAN_ATTR_WO(_name) \
+ struct vmbus_chan_attribute chan_attr_##_name = __ATTR_WO(_name)
+
+static ssize_t vmbus_chan_attr_show(struct kobject *kobj,
+ struct attribute *attr, char *buf)
+{
+ const struct vmbus_chan_attribute *attribute
+ = container_of(attr, struct vmbus_chan_attribute, attr);
+ const struct vmbus_channel *chan
+ = container_of(kobj, struct vmbus_channel, kobj);
+
+ if (!attribute->show)
+ return -EIO;
+
+ return attribute->show(chan, buf);
+}
+
+static const struct sysfs_ops vmbus_chan_sysfs_ops = {
+ .show = vmbus_chan_attr_show,
+};
+
+static ssize_t out_mask_show(const struct vmbus_channel *channel, char *buf)
+{
+ const struct hv_ring_buffer_info *rbi = &channel->outbound;
+
+ return sprintf(buf, "%u\n", rbi->ring_buffer->interrupt_mask);
+}
+VMBUS_CHAN_ATTR_RO(out_mask);
+
+static ssize_t in_mask_show(const struct vmbus_channel *channel, char *buf)
+{
+ const struct hv_ring_buffer_info *rbi = &channel->inbound;
+
+ return sprintf(buf, "%u\n", rbi->ring_buffer->interrupt_mask);
+}
+VMBUS_CHAN_ATTR_RO(in_mask);
+
+static ssize_t read_avail_show(const struct vmbus_channel *channel, char *buf)
+{
+ const struct hv_ring_buffer_info *rbi = &channel->inbound;
+
+ return sprintf(buf, "%u\n", hv_get_bytes_to_read(rbi));
+}
+VMBUS_CHAN_ATTR_RO(read_avail);
+
+static ssize_t write_avail_show(const struct vmbus_channel *channel, char *buf)
+{
+ const struct hv_ring_buffer_info *rbi = &channel->outbound;
+
+ return sprintf(buf, "%u\n", hv_get_bytes_to_write(rbi));
+}
+VMBUS_CHAN_ATTR_RO(write_avail);
+
+static ssize_t show_target_cpu(const struct vmbus_channel *channel, char *buf)
+{
+ return sprintf(buf, "%u\n", channel->target_cpu);
+}
+VMBUS_CHAN_ATTR(cpu, S_IRUGO, show_target_cpu, NULL);
+
+static ssize_t channel_pending_show(const struct vmbus_channel *channel,
+ char *buf)
+{
+ return sprintf(buf, "%d\n",
+ channel_pending(channel,
+ vmbus_connection.monitor_pages[1]));
+}
+VMBUS_CHAN_ATTR(pending, S_IRUGO, channel_pending_show, NULL);
+
+static ssize_t channel_latency_show(const struct vmbus_channel *channel,
+ char *buf)
+{
+ return sprintf(buf, "%d\n",
+ channel_latency(channel,
+ vmbus_connection.monitor_pages[1]));
+}
+VMBUS_CHAN_ATTR(latency, S_IRUGO, channel_latency_show, NULL);
+
+static ssize_t channel_interrupts_show(const struct vmbus_channel *channel, char *buf)
+{
+ return sprintf(buf, "%llu\n", channel->interrupts);
+}
+VMBUS_CHAN_ATTR(interrupts, S_IRUGO, channel_interrupts_show, NULL);
+
+static ssize_t channel_events_show(const struct vmbus_channel *channel, char *buf)
+{
+ return sprintf(buf, "%llu\n", channel->sig_events);
+}
+VMBUS_CHAN_ATTR(events, S_IRUGO, channel_events_show, NULL);
+
+static struct attribute *vmbus_chan_attrs[] = {
+ &chan_attr_out_mask.attr,
+ &chan_attr_in_mask.attr,
+ &chan_attr_read_avail.attr,
+ &chan_attr_write_avail.attr,
+ &chan_attr_cpu.attr,
+ &chan_attr_pending.attr,
+ &chan_attr_latency.attr,
+ &chan_attr_interrupts.attr,
+ &chan_attr_events.attr,
+ NULL
+};
+
+static struct kobj_type vmbus_chan_ktype = {
+ .sysfs_ops = &vmbus_chan_sysfs_ops,
+ .release = vmbus_chan_release,
+ .default_attrs = vmbus_chan_attrs,
+};
+
+/*
+ * vmbus_add_channel_kobj - setup a sub-directory under device/channels
+ */
+int vmbus_add_channel_kobj(struct hv_device *dev, struct vmbus_channel *channel)
+{
+ struct kobject *kobj = &channel->kobj;
+ u32 relid = channel->offermsg.child_relid;
+ int ret;
+
+ kobj->kset = dev->channels_kset;
+ ret = kobject_init_and_add(kobj, &vmbus_chan_ktype, NULL,
+ "%u", relid);
+ if (ret)
+ return ret;
+
+ kobject_uevent(kobj, KOBJ_ADD);
+
+ return 0;
+}
+
/*
* vmbus_device_create - Creates and registers a new child device
* on the vmbus.
@@ -1164,7 +1325,8 @@
*/
int vmbus_device_register(struct hv_device *child_device_obj)
{
- int ret = 0;
+ struct kobject *kobj = &child_device_obj->device.kobj;
+ int ret;
dev_set_name(&child_device_obj->device, "%pUl",
child_device_obj->channel->offermsg.offer.if_instance.b);
@@ -1178,13 +1340,32 @@
* binding...which will eventually call vmbus_match() and vmbus_probe()
*/
ret = device_register(&child_device_obj->device);
-
- if (ret)
+ if (ret) {
pr_err("Unable to register child device\n");
- else
- pr_debug("child device %s registered\n",
- dev_name(&child_device_obj->device));
+ return ret;
+ }
+ child_device_obj->channels_kset = kset_create_and_add("channels",
+ NULL, kobj);
+ if (!child_device_obj->channels_kset) {
+ ret = -ENOMEM;
+ goto err_dev_unregister;
+ }
+
+ ret = vmbus_add_channel_kobj(child_device_obj,
+ child_device_obj->channel);
+ if (ret) {
+ pr_err("Unable to register primary channeln");
+ goto err_kset_unregister;
+ }
+
+ return 0;
+
+err_kset_unregister:
+ kset_unregister(child_device_obj->channels_kset);
+
+err_dev_unregister:
+ device_unregister(&child_device_obj->device);
return ret;
}
diff --git a/drivers/hwtracing/coresight/coresight-dynamic-replicator.c b/drivers/hwtracing/coresight/coresight-dynamic-replicator.c
index accc205..8f4357e 100644
--- a/drivers/hwtracing/coresight/coresight-dynamic-replicator.c
+++ b/drivers/hwtracing/coresight/coresight-dynamic-replicator.c
@@ -199,8 +199,8 @@
static const struct amba_id replicator_ids[] = {
{
- .id = 0x0003b909,
- .mask = 0x0003ffff,
+ .id = 0x000bb909,
+ .mask = 0x000fffff,
},
{
/* Coresight SoC-600 */
diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c
index 56ecd7a..e03e589 100644
--- a/drivers/hwtracing/coresight/coresight-etb10.c
+++ b/drivers/hwtracing/coresight/coresight-etb10.c
@@ -748,8 +748,8 @@
static const struct amba_id etb_ids[] = {
{
- .id = 0x0003b907,
- .mask = 0x0003ffff,
+ .id = 0x000bb907,
+ .mask = 0x000fffff,
},
{ 0, 0},
};
diff --git a/drivers/hwtracing/coresight/coresight-etm3x.c b/drivers/hwtracing/coresight/coresight-etm3x.c
index e5b1ec5..39f42fd 100644
--- a/drivers/hwtracing/coresight/coresight-etm3x.c
+++ b/drivers/hwtracing/coresight/coresight-etm3x.c
@@ -901,33 +901,33 @@
static const struct amba_id etm_ids[] = {
{ /* ETM 3.3 */
- .id = 0x0003b921,
- .mask = 0x0003ffff,
+ .id = 0x000bb921,
+ .mask = 0x000fffff,
.data = "ETM 3.3",
},
{ /* ETM 3.5 - Cortex-A5 */
- .id = 0x0003b955,
- .mask = 0x0003ffff,
+ .id = 0x000bb955,
+ .mask = 0x000fffff,
.data = "ETM 3.5",
},
{ /* ETM 3.5 */
- .id = 0x0003b956,
- .mask = 0x0003ffff,
+ .id = 0x000bb956,
+ .mask = 0x000fffff,
.data = "ETM 3.5",
},
{ /* PTM 1.0 */
- .id = 0x0003b950,
- .mask = 0x0003ffff,
+ .id = 0x000bb950,
+ .mask = 0x000fffff,
.data = "PTM 1.0",
},
{ /* PTM 1.1 */
- .id = 0x0003b95f,
- .mask = 0x0003ffff,
+ .id = 0x000bb95f,
+ .mask = 0x000fffff,
.data = "PTM 1.1",
},
{ /* PTM 1.1 Qualcomm */
- .id = 0x0003006f,
- .mask = 0x0003ffff,
+ .id = 0x000b006f,
+ .mask = 0x000fffff,
.data = "PTM 1.1",
},
{ 0, 0},
diff --git a/drivers/hwtracing/coresight/coresight-funnel.c b/drivers/hwtracing/coresight/coresight-funnel.c
index 77642e0..fd3c396 100644
--- a/drivers/hwtracing/coresight/coresight-funnel.c
+++ b/drivers/hwtracing/coresight/coresight-funnel.c
@@ -248,8 +248,8 @@
static const struct amba_id funnel_ids[] = {
{
- .id = 0x0003b908,
- .mask = 0x0003ffff,
+ .id = 0x000bb908,
+ .mask = 0x000fffff,
},
{
/* Coresight SoC-600 */
diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c
index 92a780a6..15e7ef38 100644
--- a/drivers/hwtracing/coresight/coresight-stm.c
+++ b/drivers/hwtracing/coresight/coresight-stm.c
@@ -917,13 +917,13 @@
static const struct amba_id stm_ids[] = {
{
- .id = 0x0003b962,
- .mask = 0x0003ffff,
+ .id = 0x000bb962,
+ .mask = 0x000fffff,
.data = "STM32",
},
{
- .id = 0x0003b963,
- .mask = 0x0003ffff,
+ .id = 0x000bb963,
+ .mask = 0x000fffff,
.data = "STM500",
},
{ 0, 0},
diff --git a/drivers/hwtracing/coresight/coresight-tmc.c b/drivers/hwtracing/coresight/coresight-tmc.c
index 2ff4a66..0ea04f5 100644
--- a/drivers/hwtracing/coresight/coresight-tmc.c
+++ b/drivers/hwtracing/coresight/coresight-tmc.c
@@ -439,8 +439,8 @@
static const struct amba_id tmc_ids[] = {
{
- .id = 0x0003b961,
- .mask = 0x0003ffff,
+ .id = 0x000bb961,
+ .mask = 0x000fffff,
},
{
/* Coresight SoC 600 TMC-ETR/ETS */
diff --git a/drivers/hwtracing/coresight/coresight-tpiu.c b/drivers/hwtracing/coresight/coresight-tpiu.c
index d7a3e45..bef49a3 100644
--- a/drivers/hwtracing/coresight/coresight-tpiu.c
+++ b/drivers/hwtracing/coresight/coresight-tpiu.c
@@ -194,8 +194,8 @@
static const struct amba_id tpiu_ids[] = {
{
- .id = 0x0003b912,
- .mask = 0x0003ffff,
+ .id = 0x000bb912,
+ .mask = 0x000fffff,
},
{
.id = 0x0004b912,
diff --git a/drivers/misc/altera-stapl/Kconfig b/drivers/misc/altera-stapl/Kconfig
index 7f01d8e..8a828fe4 100644
--- a/drivers/misc/altera-stapl/Kconfig
+++ b/drivers/misc/altera-stapl/Kconfig
@@ -1,4 +1,5 @@
-comment "Altera FPGA firmware download module"
+comment "Altera FPGA firmware download module (requires I2C)"
+ depends on !I2C
config ALTERA_STAPL
tristate "Altera FPGA firmware download module"
diff --git a/drivers/misc/genwqe/card_base.h b/drivers/misc/genwqe/card_base.h
index 5813b5f..3743c87f 100644
--- a/drivers/misc/genwqe/card_base.h
+++ b/drivers/misc/genwqe/card_base.h
@@ -182,6 +182,7 @@
struct list_head card_list; /* list of usr_maps for card */
struct list_head pin_list; /* list of pinned memory for dev */
+ int write; /* writable map? useful in unmapping */
};
static inline void genwqe_mapping_init(struct dma_mapping *m,
@@ -189,6 +190,7 @@
{
memset(m, 0, sizeof(*m));
m->type = type;
+ m->write = 1; /* Assume the maps we create are R/W */
}
/**
@@ -347,6 +349,7 @@
* @user_size: size of user-space memory area
* @page: buffer for partial pages if needed
* @page_dma_addr: dma address partial pages
+ * @write: should we write it back to userspace?
*/
struct genwqe_sgl {
dma_addr_t sgl_dma_addr;
@@ -356,6 +359,8 @@
void __user *user_addr; /* user-space base-address */
size_t user_size; /* size of memory area */
+ int write;
+
unsigned long nr_pages;
unsigned long fpage_offs;
size_t fpage_size;
@@ -369,7 +374,7 @@
};
int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
- void __user *user_addr, size_t user_size);
+ void __user *user_addr, size_t user_size, int write);
int genwqe_setup_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
dma_addr_t *dma_list);
diff --git a/drivers/misc/genwqe/card_dev.c b/drivers/misc/genwqe/card_dev.c
index dd46177..3ecfa35 100644
--- a/drivers/misc/genwqe/card_dev.c
+++ b/drivers/misc/genwqe/card_dev.c
@@ -942,6 +942,10 @@
genwqe_mapping_init(m,
GENWQE_MAPPING_SGL_TEMP);
+
+ if (ats_flags == ATS_TYPE_SGL_RD)
+ m->write = 0;
+
rc = genwqe_user_vmap(cd, m, (void *)u_addr,
u_size, req);
if (rc != 0)
@@ -954,7 +958,7 @@
/* create genwqe style scatter gather list */
rc = genwqe_alloc_sync_sgl(cd, &req->sgls[i],
(void __user *)u_addr,
- u_size);
+ u_size, m->write);
if (rc != 0)
goto err_out;
diff --git a/drivers/misc/genwqe/card_utils.c b/drivers/misc/genwqe/card_utils.c
index 147b830..5c0d917 100644
--- a/drivers/misc/genwqe/card_utils.c
+++ b/drivers/misc/genwqe/card_utils.c
@@ -296,7 +296,7 @@
* from user-space into the cached pages.
*/
int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
- void __user *user_addr, size_t user_size)
+ void __user *user_addr, size_t user_size, int write)
{
int rc;
struct pci_dev *pci_dev = cd->pci_dev;
@@ -312,6 +312,7 @@
sgl->user_addr = user_addr;
sgl->user_size = user_size;
+ sgl->write = write;
sgl->sgl_size = genwqe_sgl_size(sgl->nr_pages);
if (get_order(sgl->sgl_size) > MAX_ORDER) {
@@ -476,14 +477,20 @@
int genwqe_free_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl)
{
int rc = 0;
+ size_t offset;
+ unsigned long res;
struct pci_dev *pci_dev = cd->pci_dev;
if (sgl->fpage) {
- if (copy_to_user(sgl->user_addr, sgl->fpage + sgl->fpage_offs,
- sgl->fpage_size)) {
- dev_err(&pci_dev->dev, "[%s] err: copying fpage!\n",
- __func__);
- rc = -EFAULT;
+ if (sgl->write) {
+ res = copy_to_user(sgl->user_addr,
+ sgl->fpage + sgl->fpage_offs, sgl->fpage_size);
+ if (res) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: copying fpage! (res=%lu)\n",
+ __func__, res);
+ rc = -EFAULT;
+ }
}
__genwqe_free_consistent(cd, PAGE_SIZE, sgl->fpage,
sgl->fpage_dma_addr);
@@ -491,12 +498,16 @@
sgl->fpage_dma_addr = 0;
}
if (sgl->lpage) {
- if (copy_to_user(sgl->user_addr + sgl->user_size -
- sgl->lpage_size, sgl->lpage,
- sgl->lpage_size)) {
- dev_err(&pci_dev->dev, "[%s] err: copying lpage!\n",
- __func__);
- rc = -EFAULT;
+ if (sgl->write) {
+ offset = sgl->user_size - sgl->lpage_size;
+ res = copy_to_user(sgl->user_addr + offset, sgl->lpage,
+ sgl->lpage_size);
+ if (res) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: copying lpage! (res=%lu)\n",
+ __func__, res);
+ rc = -EFAULT;
+ }
}
__genwqe_free_consistent(cd, PAGE_SIZE, sgl->lpage,
sgl->lpage_dma_addr);
@@ -599,14 +610,14 @@
/* pin user pages in memory */
rc = get_user_pages_fast(data & PAGE_MASK, /* page aligned addr */
m->nr_pages,
- 1, /* write by caller */
+ m->write, /* readable/writable */
m->page_list); /* ptrs to pages */
if (rc < 0)
goto fail_get_user_pages;
/* assumption: get_user_pages can be killed by signals. */
if (rc < m->nr_pages) {
- free_user_pages(m->page_list, rc, 0);
+ free_user_pages(m->page_list, rc, m->write);
rc = -EFAULT;
goto fail_get_user_pages;
}
@@ -618,7 +629,7 @@
return 0;
fail_free_user_pages:
- free_user_pages(m->page_list, m->nr_pages, 0);
+ free_user_pages(m->page_list, m->nr_pages, m->write);
fail_get_user_pages:
kfree(m->page_list);
@@ -651,7 +662,7 @@
genwqe_unmap_pages(cd, m->dma_list, m->nr_pages);
if (m->page_list) {
- free_user_pages(m->page_list, m->nr_pages, 1);
+ free_user_pages(m->page_list, m->nr_pages, m->write);
kfree(m->page_list);
m->page_list = NULL;
diff --git a/drivers/misc/lkdtm_core.c b/drivers/misc/lkdtm_core.c
index ed7f0c6..ba92291 100644
--- a/drivers/misc/lkdtm_core.c
+++ b/drivers/misc/lkdtm_core.c
@@ -122,7 +122,7 @@
}
/* Define the possible types of crashes that can be triggered. */
-struct crashtype crashtypes[] = {
+static const struct crashtype crashtypes[] = {
CRASHTYPE(PANIC),
CRASHTYPE(BUG),
CRASHTYPE(WARNING),
@@ -188,8 +188,8 @@
/* Global kprobe entry and crashtype. */
static struct kprobe *lkdtm_kprobe;
-struct crashpoint *lkdtm_crashpoint;
-struct crashtype *lkdtm_crashtype;
+static struct crashpoint *lkdtm_crashpoint;
+static const struct crashtype *lkdtm_crashtype;
/* Module parameters */
static int recur_count = -1;
@@ -212,7 +212,7 @@
/* Return the crashtype number or NULL if the name is invalid */
-static struct crashtype *find_crashtype(const char *name)
+static const struct crashtype *find_crashtype(const char *name)
{
int i;
@@ -228,7 +228,7 @@
* This is forced noinline just so it distinctly shows up in the stackdump
* which makes validation of expected lkdtm crashes easier.
*/
-static noinline void lkdtm_do_action(struct crashtype *crashtype)
+static noinline void lkdtm_do_action(const struct crashtype *crashtype)
{
if (WARN_ON(!crashtype || !crashtype->func))
return;
@@ -236,7 +236,7 @@
}
static int lkdtm_register_cpoint(struct crashpoint *crashpoint,
- struct crashtype *crashtype)
+ const struct crashtype *crashtype)
{
int ret;
@@ -300,7 +300,7 @@
size_t count, loff_t *off)
{
struct crashpoint *crashpoint = file_inode(f)->i_private;
- struct crashtype *crashtype = NULL;
+ const struct crashtype *crashtype = NULL;
char *buf;
int err;
@@ -368,7 +368,7 @@
static ssize_t direct_entry(struct file *f, const char __user *user_buf,
size_t count, loff_t *off)
{
- struct crashtype *crashtype;
+ const struct crashtype *crashtype;
char *buf;
if (count >= PAGE_SIZE)
@@ -404,7 +404,7 @@
static int __init lkdtm_module_init(void)
{
struct crashpoint *crashpoint = NULL;
- struct crashtype *crashtype = NULL;
+ const struct crashtype *crashtype = NULL;
int ret = -EINVAL;
int i;
diff --git a/drivers/misc/mei/mei-trace.c b/drivers/misc/mei/mei-trace.c
index e19e6ac..374edde 100644
--- a/drivers/misc/mei/mei-trace.c
+++ b/drivers/misc/mei/mei-trace.c
@@ -23,5 +23,4 @@
EXPORT_TRACEPOINT_SYMBOL(mei_reg_read);
EXPORT_TRACEPOINT_SYMBOL(mei_reg_write);
EXPORT_TRACEPOINT_SYMBOL(mei_pci_cfg_read);
-EXPORT_TRACEPOINT_SYMBOL(mei_pci_cfg_write);
#endif /* __CHECKER__ */
diff --git a/drivers/misc/mei/mei-trace.h b/drivers/misc/mei/mei-trace.h
index 7d2d5d4..b52e9b9 100644
--- a/drivers/misc/mei/mei-trace.h
+++ b/drivers/misc/mei/mei-trace.h
@@ -83,25 +83,6 @@
__get_str(dev), __entry->reg, __entry->offs, __entry->val)
);
-TRACE_EVENT(mei_pci_cfg_write,
- TP_PROTO(const struct device *dev, const char *reg, u32 offs, u32 val),
- TP_ARGS(dev, reg, offs, val),
- TP_STRUCT__entry(
- __string(dev, dev_name(dev))
- __field(const char *, reg)
- __field(u32, offs)
- __field(u32, val)
- ),
- TP_fast_assign(
- __assign_str(dev, dev_name(dev))
- __entry->reg = reg;
- __entry->offs = offs;
- __entry->val = val;
- ),
- TP_printk("[%s] pci cfg write %s[%#x] = %#x",
- __get_str(dev), __entry->reg, __entry->offs, __entry->val)
-);
-
#endif /* _MEI_TRACE_H_ */
/* This part must be outside protection */
diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig
index 6fd9d36..227cc74 100644
--- a/drivers/misc/mic/Kconfig
+++ b/drivers/misc/mic/Kconfig
@@ -1,3 +1,5 @@
+menu "Intel MIC & related support"
+
comment "Intel MIC Bus Driver"
config INTEL_MIC_BUS
@@ -150,3 +152,5 @@
if VOP
source "drivers/vhost/Kconfig.vringh"
endif
+
+endmenu
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 101ced4..ff505af 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -123,6 +123,17 @@
This driver can also be built as a module. If so, the module
will be called nvmem_sunxi_sid.
+config UNIPHIER_EFUSE
+ tristate "UniPhier SoCs eFuse support"
+ depends on ARCH_UNIPHIER || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This is a simple driver to dump specified values of UniPhier SoC
+ from eFuse.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-uniphier-efuse.
+
config NVMEM_VF610_OCOTP
tristate "VF610 SoC OCOTP support"
depends on SOC_VF610 || COMPILE_TEST
@@ -135,13 +146,33 @@
be called nvmem-vf610-ocotp.
config MESON_EFUSE
- tristate "Amlogic eFuse Support"
+ tristate "Amlogic Meson GX eFuse Support"
depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
help
This is a driver to retrieve specific values from the eFuse found on
- the Amlogic Meson SoCs.
+ the Amlogic Meson GX SoCs.
This driver can also be built as a module. If so, the module
will be called nvmem_meson_efuse.
+config MESON_MX_EFUSE
+ tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
+ depends on ARCH_MESON || COMPILE_TEST
+ help
+ This is a driver to retrieve specific values from the eFuse found on
+ the Amlogic Meson6, Meson8 and Meson8b SoCs.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem_meson_mx_efuse.
+
+config NVMEM_SNVS_LPGPR
+ tristate "Support for Low Power General Purpose Register"
+ depends on SOC_IMX6 || COMPILE_TEST
+ help
+ This is a driver for Low Power General Purpose Register (LPGPR) available on
+ i.MX6 SoCs in Secure Non-Volatile Storage (SNVS) of this chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-snvs-lpgpr.
+
endif
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 6f7a77f..e54dcfa 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -27,7 +27,13 @@
nvmem_rockchip_efuse-y := rockchip-efuse.o
obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o
nvmem_sunxi_sid-y := sunxi_sid.o
+obj-$(CONFIG_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o
+nvmem-uniphier-efuse-y := uniphier-efuse.o
obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o
nvmem-vf610-ocotp-y := vf610-ocotp.o
obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o
nvmem_meson_efuse-y := meson-efuse.o
+obj-$(CONFIG_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o
+nvmem_meson_mx_efuse-y := meson-mx-efuse.o
+obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o
+nvmem_snvs_lpgpr-y := snvs_lpgpr.o
diff --git a/drivers/nvmem/bcm-ocotp.c b/drivers/nvmem/bcm-ocotp.c
index 3c56e3b..5e9e324 100644
--- a/drivers/nvmem/bcm-ocotp.c
+++ b/drivers/nvmem/bcm-ocotp.c
@@ -232,7 +232,6 @@
.read_only = false,
.word_size = 4,
.stride = 4,
- .owner = THIS_MODULE,
.reg_read = bcm_otpc_read,
.reg_write = bcm_otpc_write,
};
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index d12e5de..5a5cefd 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -462,6 +462,8 @@
nvmem->id = rval;
nvmem->owner = config->owner;
+ if (!nvmem->owner && config->dev->driver)
+ nvmem->owner = config->dev->driver->owner;
nvmem->stride = config->stride;
nvmem->word_size = config->word_size;
nvmem->size = config->size;
@@ -615,7 +617,7 @@
return to_nvmem_device(d);
}
-#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF)
+#if IS_ENABLED(CONFIG_OF)
/**
* of_nvmem_device_get() - Get nvmem device from a given id
*
@@ -753,7 +755,7 @@
return cell;
}
-#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF)
+#if IS_ENABLED(CONFIG_OF)
/**
* of_nvmem_cell_get() - Get a nvmem cell from given device node and cell id
*
@@ -946,8 +948,7 @@
}
EXPORT_SYMBOL_GPL(nvmem_cell_put);
-static inline void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell,
- void *buf)
+static void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell, void *buf)
{
u8 *p, *b;
int i, bit_offset = cell->bit_offset;
@@ -1028,8 +1029,8 @@
}
EXPORT_SYMBOL_GPL(nvmem_cell_read);
-static inline void *nvmem_cell_prepare_write_buffer(struct nvmem_cell *cell,
- u8 *_buf, int len)
+static void *nvmem_cell_prepare_write_buffer(struct nvmem_cell *cell,
+ u8 *_buf, int len)
{
struct nvmem_device *nvmem = cell->nvmem;
int i, rc, nbits, bit_offset = cell->bit_offset;
diff --git a/drivers/nvmem/imx-iim.c b/drivers/nvmem/imx-iim.c
index 52ff65e..52cfe91d 100644
--- a/drivers/nvmem/imx-iim.c
+++ b/drivers/nvmem/imx-iim.c
@@ -34,7 +34,6 @@
struct iim_priv {
void __iomem *base;
struct clk *clk;
- struct nvmem_config nvmem;
};
static int imx_iim_read(void *context, unsigned int offset,
@@ -108,7 +107,7 @@
struct resource *res;
struct iim_priv *iim;
struct nvmem_device *nvmem;
- struct nvmem_config *cfg;
+ struct nvmem_config cfg = {};
const struct imx_iim_drvdata *drvdata = NULL;
iim = devm_kzalloc(dev, sizeof(*iim), GFP_KERNEL);
@@ -130,19 +129,16 @@
if (IS_ERR(iim->clk))
return PTR_ERR(iim->clk);
- cfg = &iim->nvmem;
+ cfg.name = "imx-iim",
+ cfg.read_only = true,
+ cfg.word_size = 1,
+ cfg.stride = 1,
+ cfg.reg_read = imx_iim_read,
+ cfg.dev = dev;
+ cfg.size = drvdata->nregs;
+ cfg.priv = iim;
- cfg->name = "imx-iim",
- cfg->read_only = true,
- cfg->word_size = 1,
- cfg->stride = 1,
- cfg->owner = THIS_MODULE,
- cfg->reg_read = imx_iim_read,
- cfg->dev = dev;
- cfg->size = drvdata->nregs;
- cfg->priv = iim;
-
- nvmem = nvmem_register(cfg);
+ nvmem = nvmem_register(&cfg);
if (IS_ERR(nvmem))
return PTR_ERR(nvmem);
diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index 193ca8f..d7ba351 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -40,14 +40,19 @@
#define IMX_OCOTP_ADDR_CTRL_SET 0x0004
#define IMX_OCOTP_ADDR_CTRL_CLR 0x0008
#define IMX_OCOTP_ADDR_TIMING 0x0010
-#define IMX_OCOTP_ADDR_DATA 0x0020
+#define IMX_OCOTP_ADDR_DATA0 0x0020
+#define IMX_OCOTP_ADDR_DATA1 0x0030
+#define IMX_OCOTP_ADDR_DATA2 0x0040
+#define IMX_OCOTP_ADDR_DATA3 0x0050
#define IMX_OCOTP_BM_CTRL_ADDR 0x0000007F
#define IMX_OCOTP_BM_CTRL_BUSY 0x00000100
#define IMX_OCOTP_BM_CTRL_ERROR 0x00000200
#define IMX_OCOTP_BM_CTRL_REL_SHADOWS 0x00000400
-#define DEF_RELAX 20 /* > 16.5ns */
+#define DEF_RELAX 20 /* > 16.5ns */
+#define DEF_FSOURCE 1001 /* > 1000 ns */
+#define DEF_STROBE_PROG 10000 /* IPG clocks */
#define IMX_OCOTP_WR_UNLOCK 0x3E770000
#define IMX_OCOTP_READ_LOCKED_VAL 0xBADABADA
@@ -57,10 +62,16 @@
struct device *dev;
struct clk *clk;
void __iomem *base;
- unsigned int nregs;
+ const struct ocotp_params *params;
struct nvmem_config *config;
};
+struct ocotp_params {
+ unsigned int nregs;
+ unsigned int bank_address_words;
+ void (*set_timing)(struct ocotp_priv *priv);
+};
+
static int imx_ocotp_wait_for_busy(void __iomem *base, u32 flags)
{
int count;
@@ -121,8 +132,8 @@
index = offset >> 2;
count = bytes >> 2;
- if (count > (priv->nregs - index))
- count = priv->nregs - index;
+ if (count > (priv->params->nregs - index))
+ count = priv->params->nregs - index;
mutex_lock(&ocotp_mutex);
@@ -160,32 +171,11 @@
return ret;
}
-static int imx_ocotp_write(void *context, unsigned int offset, void *val,
- size_t bytes)
+static void imx_ocotp_set_imx6_timing(struct ocotp_priv *priv)
{
- struct ocotp_priv *priv = context;
- u32 *buf = val;
- int ret;
-
unsigned long clk_rate = 0;
unsigned long strobe_read, relax, strobe_prog;
u32 timing = 0;
- u32 ctrl;
- u8 waddr;
-
- /* allow only writing one complete OTP word at a time */
- if ((bytes != priv->config->word_size) ||
- (offset % priv->config->word_size))
- return -EINVAL;
-
- mutex_lock(&ocotp_mutex);
-
- ret = clk_prepare_enable(priv->clk);
- if (ret < 0) {
- mutex_unlock(&ocotp_mutex);
- dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
- return ret;
- }
/* 47.3.1.3.1
* Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX]
@@ -204,6 +194,56 @@
timing |= (strobe_read << 16) & 0x003F0000;
writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
+static void imx_ocotp_set_imx7_timing(struct ocotp_priv *priv)
+{
+ unsigned long clk_rate = 0;
+ u64 fsource, strobe_prog;
+ u32 timing = 0;
+
+ /* i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1
+ * 6.4.3.3
+ */
+ clk_rate = clk_get_rate(priv->clk);
+ fsource = DIV_ROUND_UP_ULL((u64)clk_rate * DEF_FSOURCE,
+ NSEC_PER_SEC) + 1;
+ strobe_prog = DIV_ROUND_CLOSEST_ULL((u64)clk_rate * DEF_STROBE_PROG,
+ NSEC_PER_SEC) + 1;
+
+ timing = strobe_prog & 0x00000FFF;
+ timing |= (fsource << 12) & 0x000FF000;
+
+ writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
+static int imx_ocotp_write(void *context, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct ocotp_priv *priv = context;
+ u32 *buf = val;
+ int ret;
+
+ u32 ctrl;
+ u8 waddr;
+ u8 word = 0;
+
+ /* allow only writing one complete OTP word at a time */
+ if ((bytes != priv->config->word_size) ||
+ (offset % priv->config->word_size))
+ return -EINVAL;
+
+ mutex_lock(&ocotp_mutex);
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret < 0) {
+ mutex_unlock(&ocotp_mutex);
+ dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
+ return ret;
+ }
+
+ /* Setup the write timing values */
+ priv->params->set_timing(priv);
/* 47.3.1.3.2
* Check that HW_OCOTP_CTRL[BUSY] and HW_OCOTP_CTRL[ERROR] are clear.
@@ -224,8 +264,23 @@
* description. Both the unlock code and address can be written in the
* same operation.
*/
- /* OTP write/read address specifies one of 128 word address locations */
- waddr = offset / 4;
+ if (priv->params->bank_address_words != 0) {
+ /*
+ * In banked/i.MX7 mode the OTP register bank goes into waddr
+ * see i.MX 7Solo Applications Processor Reference Manual, Rev.
+ * 0.1 section 6.4.3.1
+ */
+ offset = offset / priv->config->word_size;
+ waddr = offset / priv->params->bank_address_words;
+ word = offset & (priv->params->bank_address_words - 1);
+ } else {
+ /*
+ * Non-banked i.MX6 mode.
+ * OTP write/read address specifies one of 128 word address
+ * locations
+ */
+ waddr = offset / 4;
+ }
ctrl = readl(priv->base + IMX_OCOTP_ADDR_CTRL);
ctrl &= ~IMX_OCOTP_BM_CTRL_ADDR;
@@ -251,8 +306,43 @@
* shift right (with zero fill). This shifting is required to program
* the OTP serially. During the write operation, HW_OCOTP_DATA cannot be
* modified.
+ * Note: on i.MX7 there are four data fields to write for banked write
+ * with the fuse blowing operation only taking place after data0
+ * has been written. This is why data0 must always be the last
+ * register written.
*/
- writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA);
+ if (priv->params->bank_address_words != 0) {
+ /* Banked/i.MX7 mode */
+ switch (word) {
+ case 0:
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+ break;
+ case 1:
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA1);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+ break;
+ case 2:
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA2);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+ break;
+ case 3:
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA3);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+ break;
+ }
+ } else {
+ /* Non-banked i.MX6 mode */
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+ }
/* 47.4.1.4.5
* Once complete, the controller will clear BUSY. A write request to a
@@ -303,17 +393,46 @@
.read_only = false,
.word_size = 4,
.stride = 4,
- .owner = THIS_MODULE,
.reg_read = imx_ocotp_read,
.reg_write = imx_ocotp_write,
};
+static const struct ocotp_params imx6q_params = {
+ .nregs = 128,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx6sl_params = {
+ .nregs = 64,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx6sx_params = {
+ .nregs = 128,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx6ul_params = {
+ .nregs = 128,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx7d_params = {
+ .nregs = 64,
+ .bank_address_words = 4,
+ .set_timing = imx_ocotp_set_imx7_timing,
+};
+
static const struct of_device_id imx_ocotp_dt_ids[] = {
- { .compatible = "fsl,imx6q-ocotp", (void *)128 },
- { .compatible = "fsl,imx6sl-ocotp", (void *)64 },
- { .compatible = "fsl,imx6sx-ocotp", (void *)128 },
- { .compatible = "fsl,imx6ul-ocotp", (void *)128 },
- { .compatible = "fsl,imx7d-ocotp", (void *)64 },
+ { .compatible = "fsl,imx6q-ocotp", .data = &imx6q_params },
+ { .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params },
+ { .compatible = "fsl,imx6sx-ocotp", .data = &imx6sx_params },
+ { .compatible = "fsl,imx6ul-ocotp", .data = &imx6ul_params },
+ { .compatible = "fsl,imx7d-ocotp", .data = &imx7d_params },
{ },
};
MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
@@ -342,8 +461,8 @@
return PTR_ERR(priv->clk);
of_id = of_match_device(imx_ocotp_dt_ids, dev);
- priv->nregs = (unsigned long)of_id->data;
- imx_ocotp_nvmem_config.size = 4 * priv->nregs;
+ priv->params = of_device_get_match_data(&pdev->dev);
+ imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
imx_ocotp_nvmem_config.dev = dev;
imx_ocotp_nvmem_config.priv = priv;
priv->config = &imx_ocotp_nvmem_config;
@@ -375,5 +494,5 @@
module_platform_driver(imx_ocotp_driver);
MODULE_AUTHOR("Philipp Zabel <p.zabel@pengutronix.de>");
-MODULE_DESCRIPTION("i.MX6 OCOTP fuse box driver");
+MODULE_DESCRIPTION("i.MX6/i.MX7 OCOTP fuse box driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/lpc18xx_eeprom.c b/drivers/nvmem/lpc18xx_eeprom.c
index 6c7e2c4..b1af966 100644
--- a/drivers/nvmem/lpc18xx_eeprom.c
+++ b/drivers/nvmem/lpc18xx_eeprom.c
@@ -159,7 +159,6 @@
.word_size = 4,
.reg_read = lpc18xx_eeprom_read,
.reg_write = lpc18xx_eeprom_gather_write,
- .owner = THIS_MODULE,
};
static int lpc18xx_eeprom_probe(struct platform_device *pdev)
diff --git a/drivers/nvmem/lpc18xx_otp.c b/drivers/nvmem/lpc18xx_otp.c
index be8d074..95268db 100644
--- a/drivers/nvmem/lpc18xx_otp.c
+++ b/drivers/nvmem/lpc18xx_otp.c
@@ -64,7 +64,6 @@
.read_only = true,
.word_size = LPC18XX_OTP_WORD_SIZE,
.stride = LPC18XX_OTP_WORD_SIZE,
- .owner = THIS_MODULE,
.reg_read = lpc18xx_otp_read,
};
diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c
index 70bfc98..a43c68f 100644
--- a/drivers/nvmem/meson-efuse.c
+++ b/drivers/nvmem/meson-efuse.c
@@ -1,5 +1,5 @@
/*
- * Amlogic eFuse Driver
+ * Amlogic Meson GX eFuse Driver
*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
@@ -37,7 +37,6 @@
static struct nvmem_config econfig = {
.name = "meson-efuse",
- .owner = THIS_MODULE,
.stride = 1,
.word_size = 1,
.read_only = true,
@@ -89,5 +88,5 @@
module_platform_driver(meson_efuse_driver);
MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
-MODULE_DESCRIPTION("Amlogic Meson NVMEM driver");
+MODULE_DESCRIPTION("Amlogic Meson GX NVMEM driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/meson-mx-efuse.c b/drivers/nvmem/meson-mx-efuse.c
new file mode 100644
index 0000000..a346b49
--- /dev/null
+++ b/drivers/nvmem/meson-mx-efuse.c
@@ -0,0 +1,265 @@
+/*
+ * Amlogic Meson6, Meson8 and Meson8b eFuse Driver
+ *
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+
+#define MESON_MX_EFUSE_CNTL1 0x04
+#define MESON_MX_EFUSE_CNTL1_PD_ENABLE BIT(27)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_BUSY BIT(26)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_START BIT(25)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE BIT(24)
+#define MESON_MX_EFUSE_CNTL1_BYTE_WR_DATA GENMASK(23, 16)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_BUSY BIT(14)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_START BIT(13)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_ENABLE BIT(12)
+#define MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET BIT(11)
+#define MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK GENMASK(10, 0)
+
+#define MESON_MX_EFUSE_CNTL2 0x08
+
+#define MESON_MX_EFUSE_CNTL4 0x10
+#define MESON_MX_EFUSE_CNTL4_ENCRYPT_ENABLE BIT(10)
+
+struct meson_mx_efuse_platform_data {
+ const char *name;
+ unsigned int word_size;
+};
+
+struct meson_mx_efuse {
+ void __iomem *base;
+ struct clk *core_clk;
+ struct nvmem_device *nvmem;
+ struct nvmem_config config;
+};
+
+static void meson_mx_efuse_mask_bits(struct meson_mx_efuse *efuse, u32 reg,
+ u32 mask, u32 set)
+{
+ u32 data;
+
+ data = readl(efuse->base + reg);
+ data &= ~mask;
+ data |= (set & mask);
+
+ writel(data, efuse->base + reg);
+}
+
+static int meson_mx_efuse_hw_enable(struct meson_mx_efuse *efuse)
+{
+ int err;
+
+ err = clk_prepare_enable(efuse->core_clk);
+ if (err)
+ return err;
+
+ /* power up the efuse */
+ meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+ MESON_MX_EFUSE_CNTL1_PD_ENABLE, 0);
+
+ meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL4,
+ MESON_MX_EFUSE_CNTL4_ENCRYPT_ENABLE, 0);
+
+ return 0;
+}
+
+static void meson_mx_efuse_hw_disable(struct meson_mx_efuse *efuse)
+{
+ meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+ MESON_MX_EFUSE_CNTL1_PD_ENABLE,
+ MESON_MX_EFUSE_CNTL1_PD_ENABLE);
+
+ clk_disable_unprepare(efuse->core_clk);
+}
+
+static int meson_mx_efuse_read_addr(struct meson_mx_efuse *efuse,
+ unsigned int addr, u32 *value)
+{
+ int err;
+ u32 regval;
+
+ /* write the address to read */
+ regval = FIELD_PREP(MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK, addr);
+ meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+ MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK, regval);
+
+ /* inform the hardware that we changed the address */
+ meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+ MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET,
+ MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET);
+ meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+ MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET, 0);
+
+ /* start the read process */
+ meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+ MESON_MX_EFUSE_CNTL1_AUTO_RD_START,
+ MESON_MX_EFUSE_CNTL1_AUTO_RD_START);
+ meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+ MESON_MX_EFUSE_CNTL1_AUTO_RD_START, 0);
+
+ /*
+ * perform a dummy read to ensure that the HW has the RD_BUSY bit set
+ * when polling for the status below.
+ */
+ readl(efuse->base + MESON_MX_EFUSE_CNTL1);
+
+ err = readl_poll_timeout_atomic(efuse->base + MESON_MX_EFUSE_CNTL1,
+ regval,
+ (!(regval & MESON_MX_EFUSE_CNTL1_AUTO_RD_BUSY)),
+ 1, 1000);
+ if (err) {
+ dev_err(efuse->config.dev,
+ "Timeout while reading efuse address %u\n", addr);
+ return err;
+ }
+
+ *value = readl(efuse->base + MESON_MX_EFUSE_CNTL2);
+
+ return 0;
+}
+
+static int meson_mx_efuse_read(void *context, unsigned int offset,
+ void *buf, size_t bytes)
+{
+ struct meson_mx_efuse *efuse = context;
+ u32 tmp;
+ int err, i, addr;
+
+ err = meson_mx_efuse_hw_enable(efuse);
+ if (err)
+ return err;
+
+ meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+ MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE,
+ MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE);
+
+ for (i = offset; i < offset + bytes; i += efuse->config.word_size) {
+ addr = i / efuse->config.word_size;
+
+ err = meson_mx_efuse_read_addr(efuse, addr, &tmp);
+ if (err)
+ break;
+
+ memcpy(buf + i, &tmp, efuse->config.word_size);
+ }
+
+ meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+ MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE, 0);
+
+ meson_mx_efuse_hw_disable(efuse);
+
+ return err;
+}
+
+static const struct meson_mx_efuse_platform_data meson6_efuse_data = {
+ .name = "meson6-efuse",
+ .word_size = 1,
+};
+
+static const struct meson_mx_efuse_platform_data meson8_efuse_data = {
+ .name = "meson8-efuse",
+ .word_size = 4,
+};
+
+static const struct meson_mx_efuse_platform_data meson8b_efuse_data = {
+ .name = "meson8b-efuse",
+ .word_size = 4,
+};
+
+static const struct of_device_id meson_mx_efuse_match[] = {
+ { .compatible = "amlogic,meson6-efuse", .data = &meson6_efuse_data },
+ { .compatible = "amlogic,meson8-efuse", .data = &meson8_efuse_data },
+ { .compatible = "amlogic,meson8b-efuse", .data = &meson8b_efuse_data },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_mx_efuse_match);
+
+static int meson_mx_efuse_probe(struct platform_device *pdev)
+{
+ const struct meson_mx_efuse_platform_data *drvdata;
+ struct meson_mx_efuse *efuse;
+ struct resource *res;
+
+ drvdata = of_device_get_match_data(&pdev->dev);
+ if (!drvdata)
+ return -EINVAL;
+
+ efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
+ if (!efuse)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ efuse->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(efuse->base))
+ return PTR_ERR(efuse->base);
+
+ efuse->config.name = devm_kstrdup(&pdev->dev, drvdata->name,
+ GFP_KERNEL);
+ efuse->config.owner = THIS_MODULE;
+ efuse->config.dev = &pdev->dev;
+ efuse->config.priv = efuse;
+ efuse->config.stride = drvdata->word_size;
+ efuse->config.word_size = drvdata->word_size;
+ efuse->config.size = SZ_512;
+ efuse->config.read_only = true;
+ efuse->config.reg_read = meson_mx_efuse_read;
+
+ efuse->core_clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(efuse->core_clk)) {
+ dev_err(&pdev->dev, "Failed to get core clock\n");
+ return PTR_ERR(efuse->core_clk);
+ }
+
+ efuse->nvmem = nvmem_register(&efuse->config);
+ if (IS_ERR(efuse->nvmem))
+ return PTR_ERR(efuse->nvmem);
+
+ platform_set_drvdata(pdev, efuse);
+
+ return 0;
+}
+
+static int meson_mx_efuse_remove(struct platform_device *pdev)
+{
+ struct meson_mx_efuse *efuse = platform_get_drvdata(pdev);
+
+ return nvmem_unregister(efuse->nvmem);
+}
+
+static struct platform_driver meson_mx_efuse_driver = {
+ .probe = meson_mx_efuse_probe,
+ .remove = meson_mx_efuse_remove,
+ .driver = {
+ .name = "meson-mx-efuse",
+ .of_match_table = meson_mx_efuse_match,
+ },
+};
+
+module_platform_driver(meson_mx_efuse_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Amlogic Meson MX eFuse NVMEM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/mtk-efuse.c b/drivers/nvmem/mtk-efuse.c
index 32fd572..9ee3479 100644
--- a/drivers/nvmem/mtk-efuse.c
+++ b/drivers/nvmem/mtk-efuse.c
@@ -18,15 +18,19 @@
#include <linux/nvmem-provider.h>
#include <linux/platform_device.h>
+struct mtk_efuse_priv {
+ void __iomem *base;
+};
+
static int mtk_reg_read(void *context,
unsigned int reg, void *_val, size_t bytes)
{
- void __iomem *base = context;
+ struct mtk_efuse_priv *priv = context;
u32 *val = _val;
int i = 0, words = bytes / 4;
while (words--)
- *val++ = readl(base + reg + (i++ * 4));
+ *val++ = readl(priv->base + reg + (i++ * 4));
return 0;
}
@@ -34,12 +38,12 @@
static int mtk_reg_write(void *context,
unsigned int reg, void *_val, size_t bytes)
{
- void __iomem *base = context;
+ struct mtk_efuse_priv *priv = context;
u32 *val = _val;
int i = 0, words = bytes / 4;
while (words--)
- writel(*val++, base + reg + (i++ * 4));
+ writel(*val++, priv->base + reg + (i++ * 4));
return 0;
}
@@ -49,27 +53,26 @@
struct device *dev = &pdev->dev;
struct resource *res;
struct nvmem_device *nvmem;
- struct nvmem_config *econfig;
- void __iomem *base;
+ struct nvmem_config econfig = {};
+ struct mtk_efuse_priv *priv;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- econfig = devm_kzalloc(dev, sizeof(*econfig), GFP_KERNEL);
- if (!econfig)
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
return -ENOMEM;
- econfig->stride = 4;
- econfig->word_size = 4;
- econfig->reg_read = mtk_reg_read;
- econfig->reg_write = mtk_reg_write;
- econfig->size = resource_size(res);
- econfig->priv = base;
- econfig->dev = dev;
- econfig->owner = THIS_MODULE;
- nvmem = nvmem_register(econfig);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ econfig.stride = 4;
+ econfig.word_size = 4;
+ econfig.reg_read = mtk_reg_read;
+ econfig.reg_write = mtk_reg_write;
+ econfig.size = resource_size(res);
+ econfig.priv = priv;
+ econfig.dev = dev;
+ nvmem = nvmem_register(&econfig);
if (IS_ERR(nvmem))
return PTR_ERR(nvmem);
diff --git a/drivers/nvmem/mxs-ocotp.c b/drivers/nvmem/mxs-ocotp.c
index d26dd03..7018e2e 100644
--- a/drivers/nvmem/mxs-ocotp.c
+++ b/drivers/nvmem/mxs-ocotp.c
@@ -118,7 +118,6 @@
.name = "mxs-ocotp",
.stride = 16,
.word_size = 4,
- .owner = THIS_MODULE,
.reg_read = mxs_ocotp_read,
};
diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index 2bdb6c3..cb3b48b 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@@ -17,15 +17,19 @@
#include <linux/nvmem-provider.h>
#include <linux/platform_device.h>
+struct qfprom_priv {
+ void __iomem *base;
+};
+
static int qfprom_reg_read(void *context,
unsigned int reg, void *_val, size_t bytes)
{
- void __iomem *base = context;
+ struct qfprom_priv *priv = context;
u8 *val = _val;
int i = 0, words = bytes;
while (words--)
- *val++ = readb(base + reg + i++);
+ *val++ = readb(priv->base + reg + i++);
return 0;
}
@@ -33,12 +37,12 @@
static int qfprom_reg_write(void *context,
unsigned int reg, void *_val, size_t bytes)
{
- void __iomem *base = context;
+ struct qfprom_priv *priv = context;
u8 *val = _val;
int i = 0, words = bytes;
while (words--)
- writeb(*val++, base + reg + i++);
+ writeb(*val++, priv->base + reg + i++);
return 0;
}
@@ -52,7 +56,6 @@
static struct nvmem_config econfig = {
.name = "qfprom",
- .owner = THIS_MODULE,
.stride = 1,
.word_size = 1,
.reg_read = qfprom_reg_read,
@@ -64,16 +67,20 @@
struct device *dev = &pdev->dev;
struct resource *res;
struct nvmem_device *nvmem;
- void __iomem *base;
+ struct qfprom_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
+ priv->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
econfig.size = resource_size(res);
econfig.dev = dev;
- econfig.priv = base;
+ econfig.priv = priv;
nvmem = nvmem_register(&econfig);
if (IS_ERR(nvmem))
diff --git a/drivers/nvmem/rockchip-efuse.c b/drivers/nvmem/rockchip-efuse.c
index 63e3eb5..123de77 100644
--- a/drivers/nvmem/rockchip-efuse.c
+++ b/drivers/nvmem/rockchip-efuse.c
@@ -149,7 +149,6 @@
static struct nvmem_config econfig = {
.name = "rockchip-efuse",
- .owner = THIS_MODULE,
.stride = 1,
.word_size = 1,
.read_only = true,
@@ -178,6 +177,10 @@
.data = (void *)&rockchip_rk3288_efuse_read,
},
{
+ .compatible = "rockchip,rk3368-efuse",
+ .data = (void *)&rockchip_rk3288_efuse_read,
+ },
+ {
.compatible = "rockchip,rk3399-efuse",
.data = (void *)&rockchip_rk3399_efuse_read,
},
diff --git a/drivers/nvmem/snvs_lpgpr.c b/drivers/nvmem/snvs_lpgpr.c
new file mode 100644
index 0000000..e5c2a4a
--- /dev/null
+++ b/drivers/nvmem/snvs_lpgpr.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2015 Pengutronix, Steffen Trumtrar <kernel@pengutronix.de>
+ * Copyright (c) 2017 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#define IMX6Q_SNVS_HPLR 0x00
+#define IMX6Q_GPR_SL BIT(5)
+#define IMX6Q_SNVS_LPLR 0x34
+#define IMX6Q_GPR_HL BIT(5)
+#define IMX6Q_SNVS_LPGPR 0x68
+
+struct snvs_lpgpr_cfg {
+ int offset;
+ int offset_hplr;
+ int offset_lplr;
+};
+
+struct snvs_lpgpr_priv {
+ struct device_d *dev;
+ struct regmap *regmap;
+ struct nvmem_config cfg;
+ const struct snvs_lpgpr_cfg *dcfg;
+};
+
+static const struct snvs_lpgpr_cfg snvs_lpgpr_cfg_imx6q = {
+ .offset = IMX6Q_SNVS_LPGPR,
+ .offset_hplr = IMX6Q_SNVS_HPLR,
+ .offset_lplr = IMX6Q_SNVS_LPLR,
+};
+
+static int snvs_lpgpr_write(void *context, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct snvs_lpgpr_priv *priv = context;
+ const struct snvs_lpgpr_cfg *dcfg = priv->dcfg;
+ unsigned int lock_reg;
+ int ret;
+
+ ret = regmap_read(priv->regmap, dcfg->offset_hplr, &lock_reg);
+ if (ret < 0)
+ return ret;
+
+ if (lock_reg & IMX6Q_GPR_SL)
+ return -EPERM;
+
+ ret = regmap_read(priv->regmap, dcfg->offset_lplr, &lock_reg);
+ if (ret < 0)
+ return ret;
+
+ if (lock_reg & IMX6Q_GPR_HL)
+ return -EPERM;
+
+ return regmap_bulk_write(priv->regmap, dcfg->offset + offset, val,
+ bytes / 4);
+}
+
+static int snvs_lpgpr_read(void *context, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct snvs_lpgpr_priv *priv = context;
+ const struct snvs_lpgpr_cfg *dcfg = priv->dcfg;
+
+ return regmap_bulk_read(priv->regmap, dcfg->offset + offset,
+ val, bytes / 4);
+}
+
+static int snvs_lpgpr_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct device_node *syscon_node;
+ struct snvs_lpgpr_priv *priv;
+ struct nvmem_config *cfg;
+ struct nvmem_device *nvmem;
+ const struct snvs_lpgpr_cfg *dcfg;
+
+ if (!node)
+ return -ENOENT;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dcfg = of_device_get_match_data(dev);
+ if (!dcfg)
+ return -EINVAL;
+
+ syscon_node = of_get_parent(node);
+ if (!syscon_node)
+ return -ENODEV;
+
+ priv->regmap = syscon_node_to_regmap(syscon_node);
+ of_node_put(syscon_node);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+ priv->dcfg = dcfg;
+
+ cfg = &priv->cfg;
+ cfg->priv = priv;
+ cfg->name = dev_name(dev);
+ cfg->dev = dev;
+ cfg->stride = 4,
+ cfg->word_size = 4,
+ cfg->size = 4,
+ cfg->owner = THIS_MODULE,
+ cfg->reg_read = snvs_lpgpr_read,
+ cfg->reg_write = snvs_lpgpr_write,
+
+ nvmem = nvmem_register(cfg);
+ if (IS_ERR(nvmem))
+ return PTR_ERR(nvmem);
+
+ platform_set_drvdata(pdev, nvmem);
+
+ return 0;
+}
+
+static int snvs_lpgpr_remove(struct platform_device *pdev)
+{
+ struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+ return nvmem_unregister(nvmem);
+}
+
+static const struct of_device_id snvs_lpgpr_dt_ids[] = {
+ { .compatible = "fsl,imx6q-snvs-lpgpr", .data = &snvs_lpgpr_cfg_imx6q },
+ { .compatible = "fsl,imx6ul-snvs-lpgpr",
+ .data = &snvs_lpgpr_cfg_imx6q },
+ { },
+};
+MODULE_DEVICE_TABLE(of, snvs_lpgpr_dt_ids);
+
+static struct platform_driver snvs_lpgpr_driver = {
+ .probe = snvs_lpgpr_probe,
+ .remove = snvs_lpgpr_remove,
+ .driver = {
+ .name = "snvs_lpgpr",
+ .of_match_table = snvs_lpgpr_dt_ids,
+ },
+};
+module_platform_driver(snvs_lpgpr_driver);
+
+MODULE_AUTHOR("Oleksij Rempel <o.rempel@pengutronix.de>");
+MODULE_DESCRIPTION("Low Power General Purpose Register in i.MX6 Secure Non-Volatile Storage");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
index 0d6648b..99bd54d 100644
--- a/drivers/nvmem/sunxi_sid.c
+++ b/drivers/nvmem/sunxi_sid.c
@@ -40,7 +40,6 @@
.read_only = true,
.stride = 4,
.word_size = 1,
- .owner = THIS_MODULE,
};
struct sunxi_sid_cfg {
@@ -199,10 +198,16 @@
.need_register_readout = true,
};
+static const struct sunxi_sid_cfg sun50i_a64_cfg = {
+ .value_offset = 0x200,
+ .size = 0x100,
+};
+
static const struct of_device_id sunxi_sid_of_match[] = {
{ .compatible = "allwinner,sun4i-a10-sid", .data = &sun4i_a10_cfg },
{ .compatible = "allwinner,sun7i-a20-sid", .data = &sun7i_a20_cfg },
{ .compatible = "allwinner,sun8i-h3-sid", .data = &sun8i_h3_cfg },
+ { .compatible = "allwinner,sun50i-a64-sid", .data = &sun50i_a64_cfg },
{/* sentinel */},
};
MODULE_DEVICE_TABLE(of, sunxi_sid_of_match);
diff --git a/drivers/nvmem/uniphier-efuse.c b/drivers/nvmem/uniphier-efuse.c
new file mode 100644
index 0000000..9d278b4
--- /dev/null
+++ b/drivers/nvmem/uniphier-efuse.c
@@ -0,0 +1,97 @@
+/*
+ * UniPhier eFuse driver
+ *
+ * Copyright (C) 2017 Socionext Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+
+struct uniphier_efuse_priv {
+ void __iomem *base;
+};
+
+static int uniphier_reg_read(void *context,
+ unsigned int reg, void *_val, size_t bytes)
+{
+ struct uniphier_efuse_priv *priv = context;
+ u32 *val = _val;
+ int offs;
+
+ for (offs = 0; offs < bytes; offs += sizeof(u32))
+ *val++ = readl(priv->base + reg + offs);
+
+ return 0;
+}
+
+static int uniphier_efuse_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct nvmem_device *nvmem;
+ struct nvmem_config econfig = {};
+ struct uniphier_efuse_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ econfig.stride = 4;
+ econfig.word_size = 4;
+ econfig.read_only = true;
+ econfig.reg_read = uniphier_reg_read;
+ econfig.size = resource_size(res);
+ econfig.priv = priv;
+ econfig.dev = dev;
+ nvmem = nvmem_register(&econfig);
+ if (IS_ERR(nvmem))
+ return PTR_ERR(nvmem);
+
+ platform_set_drvdata(pdev, nvmem);
+
+ return 0;
+}
+
+static int uniphier_efuse_remove(struct platform_device *pdev)
+{
+ struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+ return nvmem_unregister(nvmem);
+}
+
+static const struct of_device_id uniphier_efuse_of_match[] = {
+ { .compatible = "socionext,uniphier-efuse",},
+ {/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, uniphier_efuse_of_match);
+
+static struct platform_driver uniphier_efuse_driver = {
+ .probe = uniphier_efuse_probe,
+ .remove = uniphier_efuse_remove,
+ .driver = {
+ .name = "uniphier-efuse",
+ .of_match_table = uniphier_efuse_of_match,
+ },
+};
+module_platform_driver(uniphier_efuse_driver);
+
+MODULE_AUTHOR("Keiji Hayashibara <hayashibara.keiji@socionext.com>");
+MODULE_DESCRIPTION("UniPhier eFuse driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/vf610-ocotp.c b/drivers/nvmem/vf610-ocotp.c
index 72e4faa..5ae9e00 100644
--- a/drivers/nvmem/vf610-ocotp.c
+++ b/drivers/nvmem/vf610-ocotp.c
@@ -206,7 +206,6 @@
static struct nvmem_config ocotp_config = {
.name = "ocotp",
- .owner = THIS_MODULE,
.stride = 4,
.word_size = 4,
.reg_read = vf610_ocotp_read,
diff --git a/drivers/parport/parport_ip32.c b/drivers/parport/parport_ip32.c
index 0186db7..6287307 100644
--- a/drivers/parport/parport_ip32.c
+++ b/drivers/parport/parport_ip32.c
@@ -1769,7 +1769,7 @@
/*--- Default parport operations ---------------------------------------*/
-static __initdata struct parport_operations parport_ip32_ops = {
+static const struct parport_operations parport_ip32_ops __initconst = {
.write_data = parport_ip32_write_data,
.read_data = parport_ip32_read_data,
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index 55ef7d1..102646f 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -1599,7 +1599,7 @@
}
-struct bin_attribute pccard_cis_attr = {
+const struct bin_attribute pccard_cis_attr = {
.attr = { .name = "cis", .mode = S_IRUGO | S_IWUSR },
.size = 0x200,
.read = pccard_show_cis,
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index e86cd6b..6765bea 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -152,7 +152,7 @@
int pcmcia_setup_irq(struct pcmcia_device *p_dev);
/* cistpl.c */
-extern struct bin_attribute pccard_cis_attr;
+extern const struct bin_attribute pccard_cis_attr;
int pcmcia_read_cis_mem(struct pcmcia_socket *s, int attr,
u_int addr, u_int len, void *ptr);
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index 70b0894..9a4940e 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -380,11 +380,10 @@
return IRQ_RETVAL(handled);
} /* pcc_interrupt */
-static void pcc_interrupt_wrapper(u_long data)
+static void pcc_interrupt_wrapper(struct timer_list *unused)
{
pr_debug("m32r_cfc: pcc_interrupt_wrapper:\n");
pcc_interrupt(0, NULL);
- init_timer(&poll_timer);
poll_timer.expires = jiffies + poll_interval;
add_timer(&poll_timer);
}
@@ -758,9 +757,7 @@
/* Finally, schedule a polling interrupt */
if (poll_interval != 0) {
- poll_timer.function = pcc_interrupt_wrapper;
- poll_timer.data = 0;
- init_timer(&poll_timer);
+ timer_setup(&poll_timer, pcc_interrupt_wrapper, 0);
poll_timer.expires = jiffies + poll_interval;
add_timer(&poll_timer);
}
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index e50bbf8..c2239a7 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -386,10 +386,9 @@
return IRQ_RETVAL(handled);
} /* pcc_interrupt */
-static void pcc_interrupt_wrapper(u_long data)
+static void pcc_interrupt_wrapper(struct timer_list *unused)
{
pcc_interrupt(0, NULL);
- init_timer(&poll_timer);
poll_timer.expires = jiffies + poll_interval;
add_timer(&poll_timer);
}
@@ -729,9 +728,7 @@
/* Finally, schedule a polling interrupt */
if (poll_interval != 0) {
- poll_timer.function = pcc_interrupt_wrapper;
- poll_timer.data = 0;
- init_timer(&poll_timer);
+ timer_setup(&poll_timer, pcc_interrupt_wrapper, 0);
poll_timer.expires = jiffies + poll_interval;
add_timer(&poll_timer);
}
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index d674e06..1424581 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -225,6 +225,7 @@
tb_port_info(up_port,
"PCIe tunnel activation failed, aborting\n");
tb_pci_free(tunnel);
+ continue;
}
list_add(&tunnel->list, &tcm->tunnel_list);
diff --git a/drivers/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c
index 7cc5122..5dd28400 100644
--- a/drivers/vme/bridges/vme_ca91cx42.c
+++ b/drivers/vme/bridges/vme_ca91cx42.c
@@ -511,7 +511,7 @@
ca91cx42_bridge = image->parent;
/* Find pci_dev container of dev */
- if (ca91cx42_bridge->parent == NULL) {
+ if (!ca91cx42_bridge->parent) {
dev_err(ca91cx42_bridge->parent, "Dev entry NULL\n");
return -EINVAL;
}
@@ -529,14 +529,12 @@
image->kern_base = NULL;
kfree(image->bus_resource.name);
release_resource(&image->bus_resource);
- memset(&image->bus_resource, 0, sizeof(struct resource));
+ memset(&image->bus_resource, 0, sizeof(image->bus_resource));
}
- if (image->bus_resource.name == NULL) {
+ if (!image->bus_resource.name) {
image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
- if (image->bus_resource.name == NULL) {
- dev_err(ca91cx42_bridge->parent, "Unable to allocate "
- "memory for resource name\n");
+ if (!image->bus_resource.name) {
retval = -ENOMEM;
goto err_name;
}
@@ -562,7 +560,7 @@
image->kern_base = ioremap_nocache(
image->bus_resource.start, size);
- if (image->kern_base == NULL) {
+ if (!image->kern_base) {
dev_err(ca91cx42_bridge->parent, "Failed to remap resource\n");
retval = -ENOMEM;
goto err_remap;
@@ -574,7 +572,7 @@
release_resource(&image->bus_resource);
err_resource:
kfree(image->bus_resource.name);
- memset(&image->bus_resource, 0, sizeof(struct resource));
+ memset(&image->bus_resource, 0, sizeof(image->bus_resource));
err_name:
return retval;
}
@@ -588,7 +586,7 @@
image->kern_base = NULL;
release_resource(&image->bus_resource);
kfree(image->bus_resource.name);
- memset(&image->bus_resource, 0, sizeof(struct resource));
+ memset(&image->bus_resource, 0, sizeof(image->bus_resource));
}
@@ -1036,10 +1034,8 @@
dev = list->parent->parent->parent;
/* XXX descriptor must be aligned on 64-bit boundaries */
- entry = kmalloc(sizeof(struct ca91cx42_dma_entry), GFP_KERNEL);
- if (entry == NULL) {
- dev_err(dev, "Failed to allocate memory for dma resource "
- "structure\n");
+ entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+ if (!entry) {
retval = -ENOMEM;
goto err_mem;
}
@@ -1052,7 +1048,7 @@
goto err_align;
}
- memset(&entry->descriptor, 0, sizeof(struct ca91cx42_dma_descriptor));
+ memset(&entry->descriptor, 0, sizeof(entry->descriptor));
if (dest->type == VME_DMA_VME) {
entry->descriptor.dctl |= CA91CX42_DCTL_L2V;
@@ -1323,7 +1319,7 @@
/* If we already have a callback attached, we can't move it! */
for (i = 0; i < lm->monitors; i++) {
- if (bridge->lm_callback[i] != NULL) {
+ if (bridge->lm_callback[i]) {
mutex_unlock(&lm->mtx);
dev_err(dev, "Location monitor callback attached, "
"can't reset\n");
@@ -1432,7 +1428,7 @@
}
/* Check that a callback isn't already attached */
- if (bridge->lm_callback[monitor] != NULL) {
+ if (bridge->lm_callback[monitor]) {
mutex_unlock(&lm->mtx);
dev_err(dev, "Existing callback attached\n");
return -EBUSY;
@@ -1567,7 +1563,7 @@
/* Allocate mem for CR/CSR image */
bridge->crcsr_kernel = pci_zalloc_consistent(pdev, VME_CRCSR_BUF_SIZE,
&bridge->crcsr_bus);
- if (bridge->crcsr_kernel == NULL) {
+ if (!bridge->crcsr_kernel) {
dev_err(&pdev->dev, "Failed to allocate memory for CR/CSR "
"image\n");
return -ENOMEM;
@@ -1618,21 +1614,15 @@
/* We want to support more than one of each bridge so we need to
* dynamically allocate the bridge structure
*/
- ca91cx42_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL);
-
- if (ca91cx42_bridge == NULL) {
- dev_err(&pdev->dev, "Failed to allocate memory for device "
- "structure\n");
+ ca91cx42_bridge = kzalloc(sizeof(*ca91cx42_bridge), GFP_KERNEL);
+ if (!ca91cx42_bridge) {
retval = -ENOMEM;
goto err_struct;
}
vme_init_bridge(ca91cx42_bridge);
- ca91cx42_device = kzalloc(sizeof(struct ca91cx42_driver), GFP_KERNEL);
-
- if (ca91cx42_device == NULL) {
- dev_err(&pdev->dev, "Failed to allocate memory for device "
- "structure\n");
+ ca91cx42_device = kzalloc(sizeof(*ca91cx42_device), GFP_KERNEL);
+ if (!ca91cx42_device) {
retval = -ENOMEM;
goto err_driver;
}
@@ -1688,11 +1678,8 @@
/* Add master windows to list */
for (i = 0; i < CA91C142_MAX_MASTER; i++) {
- master_image = kmalloc(sizeof(struct vme_master_resource),
- GFP_KERNEL);
- if (master_image == NULL) {
- dev_err(&pdev->dev, "Failed to allocate memory for "
- "master resource structure\n");
+ master_image = kmalloc(sizeof(*master_image), GFP_KERNEL);
+ if (!master_image) {
retval = -ENOMEM;
goto err_master;
}
@@ -1706,7 +1693,7 @@
VME_SUPER | VME_USER | VME_PROG | VME_DATA;
master_image->width_attr = VME_D8 | VME_D16 | VME_D32 | VME_D64;
memset(&master_image->bus_resource, 0,
- sizeof(struct resource));
+ sizeof(master_image->bus_resource));
master_image->kern_base = NULL;
list_add_tail(&master_image->list,
&ca91cx42_bridge->master_resources);
@@ -1714,11 +1701,8 @@
/* Add slave windows to list */
for (i = 0; i < CA91C142_MAX_SLAVE; i++) {
- slave_image = kmalloc(sizeof(struct vme_slave_resource),
- GFP_KERNEL);
- if (slave_image == NULL) {
- dev_err(&pdev->dev, "Failed to allocate memory for "
- "slave resource structure\n");
+ slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL);
+ if (!slave_image) {
retval = -ENOMEM;
goto err_slave;
}
@@ -1741,11 +1725,8 @@
/* Add dma engines to list */
for (i = 0; i < CA91C142_MAX_DMA; i++) {
- dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource),
- GFP_KERNEL);
- if (dma_ctrlr == NULL) {
- dev_err(&pdev->dev, "Failed to allocate memory for "
- "dma resource structure\n");
+ dma_ctrlr = kmalloc(sizeof(*dma_ctrlr), GFP_KERNEL);
+ if (!dma_ctrlr) {
retval = -ENOMEM;
goto err_dma;
}
@@ -1762,10 +1743,8 @@
}
/* Add location monitor to list */
- lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL);
- if (lm == NULL) {
- dev_err(&pdev->dev, "Failed to allocate memory for "
- "location monitor resource structure\n");
+ lm = kmalloc(sizeof(*lm), GFP_KERNEL);
+ if (!lm) {
retval = -ENOMEM;
goto err_lm;
}
diff --git a/drivers/vme/bridges/vme_fake.c b/drivers/vme/bridges/vme_fake.c
index 30b3acc..7d83691 100644
--- a/drivers/vme/bridges/vme_fake.c
+++ b/drivers/vme/bridges/vme_fake.c
@@ -409,7 +409,7 @@
/* Each location monitor covers 8 bytes */
if (((lm_base + (8 * i)) <= addr) &&
((lm_base + (8 * i) + 8) > addr)) {
- if (bridge->lm_callback[i] != NULL)
+ if (bridge->lm_callback[i])
bridge->lm_callback[i](
bridge->lm_data[i]);
}
@@ -866,7 +866,7 @@
/* If we already have a callback attached, we can't move it! */
for (i = 0; i < lm->monitors; i++) {
- if (bridge->lm_callback[i] != NULL) {
+ if (bridge->lm_callback[i]) {
mutex_unlock(&lm->mtx);
pr_err("Location monitor callback attached, can't reset\n");
return -EBUSY;
@@ -940,7 +940,7 @@
}
/* Check that a callback isn't already attached */
- if (bridge->lm_callback[monitor] != NULL) {
+ if (bridge->lm_callback[monitor]) {
mutex_unlock(&lm->mtx);
pr_err("Existing callback attached\n");
return -EBUSY;
@@ -978,7 +978,7 @@
/* If all location monitors disabled, disable global Location Monitor */
tmp = 0;
for (i = 0; i < lm->monitors; i++) {
- if (bridge->lm_callback[i] != NULL)
+ if (bridge->lm_callback[i])
tmp = 1;
}
@@ -1003,7 +1003,7 @@
{
void *alloc = kmalloc(size, GFP_KERNEL);
- if (alloc != NULL)
+ if (alloc)
*dma = fake_ptr_to_pci(alloc);
return alloc;
@@ -1039,7 +1039,7 @@
/* Allocate mem for CR/CSR image */
bridge->crcsr_kernel = kzalloc(VME_CRCSR_BUF_SIZE, GFP_KERNEL);
bridge->crcsr_bus = fake_ptr_to_pci(bridge->crcsr_kernel);
- if (bridge->crcsr_kernel == NULL)
+ if (!bridge->crcsr_kernel)
return -ENOMEM;
vstat = fake_slot_get(fake_bridge);
@@ -1075,14 +1075,14 @@
/* If we want to support more than one bridge at some point, we need to
* dynamically allocate this so we get one per device.
*/
- fake_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL);
- if (fake_bridge == NULL) {
+ fake_bridge = kzalloc(sizeof(*fake_bridge), GFP_KERNEL);
+ if (!fake_bridge) {
retval = -ENOMEM;
goto err_struct;
}
- fake_device = kzalloc(sizeof(struct fake_driver), GFP_KERNEL);
- if (fake_device == NULL) {
+ fake_device = kzalloc(sizeof(*fake_device), GFP_KERNEL);
+ if (!fake_device) {
retval = -ENOMEM;
goto err_driver;
}
@@ -1104,9 +1104,8 @@
/* Add master windows to list */
INIT_LIST_HEAD(&fake_bridge->master_resources);
for (i = 0; i < FAKE_MAX_MASTER; i++) {
- master_image = kmalloc(sizeof(struct vme_master_resource),
- GFP_KERNEL);
- if (master_image == NULL) {
+ master_image = kmalloc(sizeof(*master_image), GFP_KERNEL);
+ if (!master_image) {
retval = -ENOMEM;
goto err_master;
}
@@ -1131,9 +1130,8 @@
/* Add slave windows to list */
INIT_LIST_HEAD(&fake_bridge->slave_resources);
for (i = 0; i < FAKE_MAX_SLAVE; i++) {
- slave_image = kmalloc(sizeof(struct vme_slave_resource),
- GFP_KERNEL);
- if (slave_image == NULL) {
+ slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL);
+ if (!slave_image) {
retval = -ENOMEM;
goto err_slave;
}
@@ -1154,9 +1152,8 @@
/* Add location monitor to list */
INIT_LIST_HEAD(&fake_bridge->lm_resources);
- lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL);
- if (lm == NULL) {
- pr_err("Failed to allocate memory for location monitor resource structure\n");
+ lm = kmalloc(sizeof(*lm), GFP_KERNEL);
+ if (!lm) {
retval = -ENOMEM;
goto err_lm;
}
diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c
index fc1b634..647d231 100644
--- a/drivers/vme/bridges/vme_tsi148.c
+++ b/drivers/vme/bridges/vme_tsi148.c
@@ -741,18 +741,16 @@
image->kern_base = NULL;
kfree(image->bus_resource.name);
release_resource(&image->bus_resource);
- memset(&image->bus_resource, 0, sizeof(struct resource));
+ memset(&image->bus_resource, 0, sizeof(image->bus_resource));
}
/* Exit here if size is zero */
if (size == 0)
return 0;
- if (image->bus_resource.name == NULL) {
+ if (!image->bus_resource.name) {
image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
- if (image->bus_resource.name == NULL) {
- dev_err(tsi148_bridge->parent, "Unable to allocate "
- "memory for resource name\n");
+ if (!image->bus_resource.name) {
retval = -ENOMEM;
goto err_name;
}
@@ -778,7 +776,7 @@
image->kern_base = ioremap_nocache(
image->bus_resource.start, size);
- if (image->kern_base == NULL) {
+ if (!image->kern_base) {
dev_err(tsi148_bridge->parent, "Failed to remap resource\n");
retval = -ENOMEM;
goto err_remap;
@@ -790,7 +788,7 @@
release_resource(&image->bus_resource);
err_resource:
kfree(image->bus_resource.name);
- memset(&image->bus_resource, 0, sizeof(struct resource));
+ memset(&image->bus_resource, 0, sizeof(image->bus_resource));
err_name:
return retval;
}
@@ -804,7 +802,7 @@
image->kern_base = NULL;
release_resource(&image->bus_resource);
kfree(image->bus_resource.name);
- memset(&image->bus_resource, 0, sizeof(struct resource));
+ memset(&image->bus_resource, 0, sizeof(image->bus_resource));
}
/*
@@ -1641,10 +1639,8 @@
tsi148_bridge = list->parent->parent;
/* Descriptor must be aligned on 64-bit boundaries */
- entry = kmalloc(sizeof(struct tsi148_dma_entry), GFP_KERNEL);
- if (entry == NULL) {
- dev_err(tsi148_bridge->parent, "Failed to allocate memory for "
- "dma resource structure\n");
+ entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+ if (!entry) {
retval = -ENOMEM;
goto err_mem;
}
@@ -1661,7 +1657,7 @@
/* Given we are going to fill out the structure, we probably don't
* need to zero it, but better safe than sorry for now.
*/
- memset(&entry->descriptor, 0, sizeof(struct tsi148_dma_descriptor));
+ memset(&entry->descriptor, 0, sizeof(entry->descriptor));
/* Fill out source part */
switch (src->type) {
@@ -1756,8 +1752,9 @@
list_add_tail(&entry->list, &list->entries);
entry->dma_handle = dma_map_single(tsi148_bridge->parent,
- &entry->descriptor,
- sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE);
+ &entry->descriptor,
+ sizeof(entry->descriptor),
+ DMA_TO_DEVICE);
if (dma_mapping_error(tsi148_bridge->parent, entry->dma_handle)) {
dev_err(tsi148_bridge->parent, "DMA mapping error\n");
retval = -EINVAL;
@@ -1946,7 +1943,7 @@
/* If we already have a callback attached, we can't move it! */
for (i = 0; i < lm->monitors; i++) {
- if (bridge->lm_callback[i] != NULL) {
+ if (bridge->lm_callback[i]) {
mutex_unlock(&lm->mtx);
dev_err(tsi148_bridge->parent, "Location monitor "
"callback attached, can't reset\n");
@@ -2071,7 +2068,7 @@
}
/* Check that a callback isn't already attached */
- if (bridge->lm_callback[monitor] != NULL) {
+ if (bridge->lm_callback[monitor]) {
mutex_unlock(&lm->mtx);
dev_err(tsi148_bridge->parent, "Existing callback attached\n");
return -EBUSY;
@@ -2208,7 +2205,7 @@
/* Allocate mem for CR/CSR image */
bridge->crcsr_kernel = pci_zalloc_consistent(pdev, VME_CRCSR_BUF_SIZE,
&bridge->crcsr_bus);
- if (bridge->crcsr_kernel == NULL) {
+ if (!bridge->crcsr_kernel) {
dev_err(tsi148_bridge->parent, "Failed to allocate memory for "
"CR/CSR image\n");
return -ENOMEM;
@@ -2294,19 +2291,15 @@
/* If we want to support more than one of each bridge, we need to
* dynamically generate this so we get one per device
*/
- tsi148_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL);
- if (tsi148_bridge == NULL) {
- dev_err(&pdev->dev, "Failed to allocate memory for device "
- "structure\n");
+ tsi148_bridge = kzalloc(sizeof(*tsi148_bridge), GFP_KERNEL);
+ if (!tsi148_bridge) {
retval = -ENOMEM;
goto err_struct;
}
vme_init_bridge(tsi148_bridge);
- tsi148_device = kzalloc(sizeof(struct tsi148_driver), GFP_KERNEL);
- if (tsi148_device == NULL) {
- dev_err(&pdev->dev, "Failed to allocate memory for device "
- "structure\n");
+ tsi148_device = kzalloc(sizeof(*tsi148_device), GFP_KERNEL);
+ if (!tsi148_device) {
retval = -ENOMEM;
goto err_driver;
}
@@ -2371,10 +2364,9 @@
master_num--;
tsi148_device->flush_image =
- kmalloc(sizeof(struct vme_master_resource), GFP_KERNEL);
- if (tsi148_device->flush_image == NULL) {
- dev_err(&pdev->dev, "Failed to allocate memory for "
- "flush resource structure\n");
+ kmalloc(sizeof(*tsi148_device->flush_image),
+ GFP_KERNEL);
+ if (!tsi148_device->flush_image) {
retval = -ENOMEM;
goto err_master;
}
@@ -2383,17 +2375,14 @@
tsi148_device->flush_image->locked = 1;
tsi148_device->flush_image->number = master_num;
memset(&tsi148_device->flush_image->bus_resource, 0,
- sizeof(struct resource));
+ sizeof(tsi148_device->flush_image->bus_resource));
tsi148_device->flush_image->kern_base = NULL;
}
/* Add master windows to list */
for (i = 0; i < master_num; i++) {
- master_image = kmalloc(sizeof(struct vme_master_resource),
- GFP_KERNEL);
- if (master_image == NULL) {
- dev_err(&pdev->dev, "Failed to allocate memory for "
- "master resource structure\n");
+ master_image = kmalloc(sizeof(*master_image), GFP_KERNEL);
+ if (!master_image) {
retval = -ENOMEM;
goto err_master;
}
@@ -2410,7 +2399,7 @@
VME_PROG | VME_DATA;
master_image->width_attr = VME_D16 | VME_D32;
memset(&master_image->bus_resource, 0,
- sizeof(struct resource));
+ sizeof(master_image->bus_resource));
master_image->kern_base = NULL;
list_add_tail(&master_image->list,
&tsi148_bridge->master_resources);
@@ -2418,11 +2407,8 @@
/* Add slave windows to list */
for (i = 0; i < TSI148_MAX_SLAVE; i++) {
- slave_image = kmalloc(sizeof(struct vme_slave_resource),
- GFP_KERNEL);
- if (slave_image == NULL) {
- dev_err(&pdev->dev, "Failed to allocate memory for "
- "slave resource structure\n");
+ slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL);
+ if (!slave_image) {
retval = -ENOMEM;
goto err_slave;
}
@@ -2442,11 +2428,8 @@
/* Add dma engines to list */
for (i = 0; i < TSI148_MAX_DMA; i++) {
- dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource),
- GFP_KERNEL);
- if (dma_ctrlr == NULL) {
- dev_err(&pdev->dev, "Failed to allocate memory for "
- "dma resource structure\n");
+ dma_ctrlr = kmalloc(sizeof(*dma_ctrlr), GFP_KERNEL);
+ if (!dma_ctrlr) {
retval = -ENOMEM;
goto err_dma;
}
@@ -2465,10 +2448,8 @@
}
/* Add location monitor to list */
- lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL);
- if (lm == NULL) {
- dev_err(&pdev->dev, "Failed to allocate memory for "
- "location monitor resource structure\n");
+ lm = kmalloc(sizeof(*lm), GFP_KERNEL);
+ if (!lm) {
retval = -ENOMEM;
goto err_lm;
}
diff --git a/drivers/vme/vme.c b/drivers/vme/vme.c
index 6a3ead4..8124622 100644
--- a/drivers/vme/vme.c
+++ b/drivers/vme/vme.c
@@ -92,23 +92,23 @@
{
struct vme_bridge *bridge;
- if (resource == NULL) {
+ if (!resource) {
printk(KERN_ERR "No resource\n");
return NULL;
}
bridge = find_bridge(resource);
- if (bridge == NULL) {
+ if (!bridge) {
printk(KERN_ERR "Can't find bridge\n");
return NULL;
}
- if (bridge->parent == NULL) {
+ if (!bridge->parent) {
printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name);
return NULL;
}
- if (bridge->alloc_consistent == NULL) {
+ if (!bridge->alloc_consistent) {
printk(KERN_ERR "alloc_consistent not supported by bridge %s\n",
bridge->name);
return NULL;
@@ -132,23 +132,23 @@
{
struct vme_bridge *bridge;
- if (resource == NULL) {
+ if (!resource) {
printk(KERN_ERR "No resource\n");
return;
}
bridge = find_bridge(resource);
- if (bridge == NULL) {
+ if (!bridge) {
printk(KERN_ERR "Can't find bridge\n");
return;
}
- if (bridge->parent == NULL) {
+ if (!bridge->parent) {
printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name);
return;
}
- if (bridge->free_consistent == NULL) {
+ if (!bridge->free_consistent) {
printk(KERN_ERR "free_consistent not supported by bridge %s\n",
bridge->name);
return;
@@ -208,29 +208,27 @@
{
int retval = 0;
+ if (vme_base + size < size)
+ return -EINVAL;
+
switch (aspace) {
case VME_A16:
- if (((vme_base + size) > VME_A16_MAX) ||
- (vme_base > VME_A16_MAX))
+ if (vme_base + size > VME_A16_MAX)
retval = -EFAULT;
break;
case VME_A24:
- if (((vme_base + size) > VME_A24_MAX) ||
- (vme_base > VME_A24_MAX))
+ if (vme_base + size > VME_A24_MAX)
retval = -EFAULT;
break;
case VME_A32:
- if (((vme_base + size) > VME_A32_MAX) ||
- (vme_base > VME_A32_MAX))
+ if (vme_base + size > VME_A32_MAX)
retval = -EFAULT;
break;
case VME_A64:
- if ((size != 0) && (vme_base > U64_MAX + 1 - size))
- retval = -EFAULT;
+ /* The VME_A64_MAX limit is actually U64_MAX + 1 */
break;
case VME_CRCSR:
- if (((vme_base + size) > VME_CRCSR_MAX) ||
- (vme_base > VME_CRCSR_MAX))
+ if (vme_base + size > VME_CRCSR_MAX)
retval = -EFAULT;
break;
case VME_USER1:
@@ -303,7 +301,7 @@
struct vme_resource *resource = NULL;
bridge = vdev->bridge;
- if (bridge == NULL) {
+ if (!bridge) {
printk(KERN_ERR "Can't find VME bus\n");
goto err_bus;
}
@@ -313,7 +311,7 @@
slave_image = list_entry(slave_pos,
struct vme_slave_resource, list);
- if (slave_image == NULL) {
+ if (!slave_image) {
printk(KERN_ERR "Registered NULL Slave resource\n");
continue;
}
@@ -333,14 +331,13 @@
}
/* No free image */
- if (allocated_image == NULL)
+ if (!allocated_image)
goto err_image;
- resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL);
- if (resource == NULL) {
- printk(KERN_WARNING "Unable to allocate resource structure\n");
+ resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+ if (!resource)
goto err_alloc;
- }
+
resource->type = VME_SLAVE;
resource->entry = &allocated_image->list;
@@ -389,7 +386,7 @@
image = list_entry(resource->entry, struct vme_slave_resource, list);
- if (bridge->slave_set == NULL) {
+ if (!bridge->slave_set) {
printk(KERN_ERR "Function not supported\n");
return -ENOSYS;
}
@@ -438,7 +435,7 @@
image = list_entry(resource->entry, struct vme_slave_resource, list);
- if (bridge->slave_get == NULL) {
+ if (!bridge->slave_get) {
printk(KERN_ERR "vme_slave_get not supported\n");
return -EINVAL;
}
@@ -465,7 +462,7 @@
slave_image = list_entry(resource->entry, struct vme_slave_resource,
list);
- if (slave_image == NULL) {
+ if (!slave_image) {
printk(KERN_ERR "Can't find slave resource\n");
return;
}
@@ -505,7 +502,7 @@
struct vme_resource *resource = NULL;
bridge = vdev->bridge;
- if (bridge == NULL) {
+ if (!bridge) {
printk(KERN_ERR "Can't find VME bus\n");
goto err_bus;
}
@@ -515,7 +512,7 @@
master_image = list_entry(master_pos,
struct vme_master_resource, list);
- if (master_image == NULL) {
+ if (!master_image) {
printk(KERN_WARNING "Registered NULL master resource\n");
continue;
}
@@ -536,16 +533,15 @@
}
/* Check to see if we found a resource */
- if (allocated_image == NULL) {
+ if (!allocated_image) {
printk(KERN_ERR "Can't find a suitable resource\n");
goto err_image;
}
- resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL);
- if (resource == NULL) {
- printk(KERN_ERR "Unable to allocate resource structure\n");
+ resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+ if (!resource)
goto err_alloc;
- }
+
resource->type = VME_MASTER;
resource->entry = &allocated_image->list;
@@ -594,7 +590,7 @@
image = list_entry(resource->entry, struct vme_master_resource, list);
- if (bridge->master_set == NULL) {
+ if (!bridge->master_set) {
printk(KERN_WARNING "vme_master_set not supported\n");
return -EINVAL;
}
@@ -644,7 +640,7 @@
image = list_entry(resource->entry, struct vme_master_resource, list);
- if (bridge->master_get == NULL) {
+ if (!bridge->master_get) {
printk(KERN_WARNING "%s not supported\n", __func__);
return -EINVAL;
}
@@ -676,7 +672,7 @@
struct vme_master_resource *image;
size_t length;
- if (bridge->master_read == NULL) {
+ if (!bridge->master_read) {
printk(KERN_WARNING "Reading from resource not supported\n");
return -EINVAL;
}
@@ -725,7 +721,7 @@
struct vme_master_resource *image;
size_t length;
- if (bridge->master_write == NULL) {
+ if (!bridge->master_write) {
printk(KERN_WARNING "Writing to resource not supported\n");
return -EINVAL;
}
@@ -776,7 +772,7 @@
struct vme_bridge *bridge = find_bridge(resource);
struct vme_master_resource *image;
- if (bridge->master_rmw == NULL) {
+ if (!bridge->master_rmw) {
printk(KERN_WARNING "Writing to resource not supported\n");
return -EINVAL;
}
@@ -846,7 +842,7 @@
master_image = list_entry(resource->entry, struct vme_master_resource,
list);
- if (master_image == NULL) {
+ if (!master_image) {
printk(KERN_ERR "Can't find master resource\n");
return;
}
@@ -886,7 +882,7 @@
printk(KERN_ERR "No VME resource Attribute tests done\n");
bridge = vdev->bridge;
- if (bridge == NULL) {
+ if (!bridge) {
printk(KERN_ERR "Can't find VME bus\n");
goto err_bus;
}
@@ -895,8 +891,7 @@
list_for_each(dma_pos, &bridge->dma_resources) {
dma_ctrlr = list_entry(dma_pos,
struct vme_dma_resource, list);
-
- if (dma_ctrlr == NULL) {
+ if (!dma_ctrlr) {
printk(KERN_ERR "Registered NULL DMA resource\n");
continue;
}
@@ -915,14 +910,13 @@
}
/* Check to see if we found a resource */
- if (allocated_ctrlr == NULL)
+ if (!allocated_ctrlr)
goto err_ctrlr;
- resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL);
- if (resource == NULL) {
- printk(KERN_WARNING "Unable to allocate resource structure\n");
+ resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+ if (!resource)
goto err_alloc;
- }
+
resource->type = VME_DMA;
resource->entry = &allocated_ctrlr->list;
@@ -951,7 +945,6 @@
*/
struct vme_dma_list *vme_new_dma_list(struct vme_resource *resource)
{
- struct vme_dma_resource *ctrlr;
struct vme_dma_list *dma_list;
if (resource->type != VME_DMA) {
@@ -959,15 +952,14 @@
return NULL;
}
- ctrlr = list_entry(resource->entry, struct vme_dma_resource, list);
-
- dma_list = kmalloc(sizeof(struct vme_dma_list), GFP_KERNEL);
- if (dma_list == NULL) {
- printk(KERN_ERR "Unable to allocate memory for new DMA list\n");
+ dma_list = kmalloc(sizeof(*dma_list), GFP_KERNEL);
+ if (!dma_list)
return NULL;
- }
+
INIT_LIST_HEAD(&dma_list->entries);
- dma_list->parent = ctrlr;
+ dma_list->parent = list_entry(resource->entry,
+ struct vme_dma_resource,
+ list);
mutex_init(&dma_list->mtx);
return dma_list;
@@ -990,17 +982,13 @@
struct vme_dma_attr *attributes;
struct vme_dma_pattern *pattern_attr;
- attributes = kmalloc(sizeof(struct vme_dma_attr), GFP_KERNEL);
- if (attributes == NULL) {
- printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
+ attributes = kmalloc(sizeof(*attributes), GFP_KERNEL);
+ if (!attributes)
goto err_attr;
- }
- pattern_attr = kmalloc(sizeof(struct vme_dma_pattern), GFP_KERNEL);
- if (pattern_attr == NULL) {
- printk(KERN_ERR "Unable to allocate memory for pattern attributes\n");
+ pattern_attr = kmalloc(sizeof(*pattern_attr), GFP_KERNEL);
+ if (!pattern_attr)
goto err_pat;
- }
attributes->type = VME_DMA_PATTERN;
attributes->private = (void *)pattern_attr;
@@ -1034,19 +1022,13 @@
/* XXX Run some sanity checks here */
- attributes = kmalloc(sizeof(struct vme_dma_attr), GFP_KERNEL);
- if (attributes == NULL) {
- printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
+ attributes = kmalloc(sizeof(*attributes), GFP_KERNEL);
+ if (!attributes)
goto err_attr;
- }
- pci_attr = kmalloc(sizeof(struct vme_dma_pci), GFP_KERNEL);
- if (pci_attr == NULL) {
- printk(KERN_ERR "Unable to allocate memory for PCI attributes\n");
+ pci_attr = kmalloc(sizeof(*pci_attr), GFP_KERNEL);
+ if (!pci_attr)
goto err_pci;
- }
-
-
attributes->type = VME_DMA_PCI;
attributes->private = (void *)pci_attr;
@@ -1081,18 +1063,13 @@
struct vme_dma_attr *attributes;
struct vme_dma_vme *vme_attr;
- attributes = kmalloc(
- sizeof(struct vme_dma_attr), GFP_KERNEL);
- if (attributes == NULL) {
- printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
+ attributes = kmalloc(sizeof(*attributes), GFP_KERNEL);
+ if (!attributes)
goto err_attr;
- }
- vme_attr = kmalloc(sizeof(struct vme_dma_vme), GFP_KERNEL);
- if (vme_attr == NULL) {
- printk(KERN_ERR "Unable to allocate memory for VME attributes\n");
+ vme_attr = kmalloc(sizeof(*vme_attr), GFP_KERNEL);
+ if (!vme_attr)
goto err_vme;
- }
attributes->type = VME_DMA_VME;
attributes->private = (void *)vme_attr;
@@ -1148,7 +1125,7 @@
struct vme_bridge *bridge = list->parent->parent;
int retval;
- if (bridge->dma_list_add == NULL) {
+ if (!bridge->dma_list_add) {
printk(KERN_WARNING "Link List DMA generation not supported\n");
return -EINVAL;
}
@@ -1181,7 +1158,7 @@
struct vme_bridge *bridge = list->parent->parent;
int retval;
- if (bridge->dma_list_exec == NULL) {
+ if (!bridge->dma_list_exec) {
printk(KERN_ERR "Link List DMA execution not supported\n");
return -EINVAL;
}
@@ -1210,14 +1187,14 @@
struct vme_bridge *bridge = list->parent->parent;
int retval;
- if (bridge->dma_list_empty == NULL) {
+ if (!bridge->dma_list_empty) {
printk(KERN_WARNING "Emptying of Link Lists not supported\n");
return -EINVAL;
}
if (!mutex_trylock(&list->mtx)) {
printk(KERN_ERR "Link List in use\n");
- return -EINVAL;
+ return -EBUSY;
}
/*
@@ -1342,8 +1319,7 @@
call = bridge->irq[level - 1].callback[statid].func;
priv_data = bridge->irq[level - 1].callback[statid].priv_data;
-
- if (call != NULL)
+ if (call)
call(level, statid, priv_data);
else
printk(KERN_WARNING "Spurious VME interrupt, level:%x, vector:%x\n",
@@ -1374,7 +1350,7 @@
struct vme_bridge *bridge;
bridge = vdev->bridge;
- if (bridge == NULL) {
+ if (!bridge) {
printk(KERN_ERR "Can't find VME bus\n");
return -EINVAL;
}
@@ -1384,7 +1360,7 @@
return -EINVAL;
}
- if (bridge->irq_set == NULL) {
+ if (!bridge->irq_set) {
printk(KERN_ERR "Configuring interrupts not supported\n");
return -EINVAL;
}
@@ -1423,7 +1399,7 @@
struct vme_bridge *bridge;
bridge = vdev->bridge;
- if (bridge == NULL) {
+ if (!bridge) {
printk(KERN_ERR "Can't find VME bus\n");
return;
}
@@ -1433,7 +1409,7 @@
return;
}
- if (bridge->irq_set == NULL) {
+ if (!bridge->irq_set) {
printk(KERN_ERR "Configuring interrupts not supported\n");
return;
}
@@ -1470,7 +1446,7 @@
struct vme_bridge *bridge;
bridge = vdev->bridge;
- if (bridge == NULL) {
+ if (!bridge) {
printk(KERN_ERR "Can't find VME bus\n");
return -EINVAL;
}
@@ -1480,7 +1456,7 @@
return -EINVAL;
}
- if (bridge->irq_generate == NULL) {
+ if (!bridge->irq_generate) {
printk(KERN_WARNING "Interrupt generation not supported\n");
return -EINVAL;
}
@@ -1508,7 +1484,7 @@
struct vme_resource *resource = NULL;
bridge = vdev->bridge;
- if (bridge == NULL) {
+ if (!bridge) {
printk(KERN_ERR "Can't find VME bus\n");
goto err_bus;
}
@@ -1517,8 +1493,7 @@
list_for_each(lm_pos, &bridge->lm_resources) {
lm = list_entry(lm_pos,
struct vme_lm_resource, list);
-
- if (lm == NULL) {
+ if (!lm) {
printk(KERN_ERR "Registered NULL Location Monitor resource\n");
continue;
}
@@ -1535,14 +1510,13 @@
}
/* Check to see if we found a resource */
- if (allocated_lm == NULL)
+ if (!allocated_lm)
goto err_lm;
- resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL);
- if (resource == NULL) {
- printk(KERN_ERR "Unable to allocate resource structure\n");
+ resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+ if (!resource)
goto err_alloc;
- }
+
resource->type = VME_LM;
resource->entry = &allocated_lm->list;
@@ -1612,7 +1586,7 @@
lm = list_entry(resource->entry, struct vme_lm_resource, list);
- if (bridge->lm_set == NULL) {
+ if (!bridge->lm_set) {
printk(KERN_ERR "vme_lm_set not supported\n");
return -EINVAL;
}
@@ -1648,7 +1622,7 @@
lm = list_entry(resource->entry, struct vme_lm_resource, list);
- if (bridge->lm_get == NULL) {
+ if (!bridge->lm_get) {
printk(KERN_ERR "vme_lm_get not supported\n");
return -EINVAL;
}
@@ -1685,7 +1659,7 @@
lm = list_entry(resource->entry, struct vme_lm_resource, list);
- if (bridge->lm_attach == NULL) {
+ if (!bridge->lm_attach) {
printk(KERN_ERR "vme_lm_attach not supported\n");
return -EINVAL;
}
@@ -1718,7 +1692,7 @@
lm = list_entry(resource->entry, struct vme_lm_resource, list);
- if (bridge->lm_detach == NULL) {
+ if (!bridge->lm_detach) {
printk(KERN_ERR "vme_lm_detach not supported\n");
return -EINVAL;
}
@@ -1780,12 +1754,12 @@
struct vme_bridge *bridge;
bridge = vdev->bridge;
- if (bridge == NULL) {
+ if (!bridge) {
printk(KERN_ERR "Can't find VME bus\n");
return -EINVAL;
}
- if (bridge->slot_get == NULL) {
+ if (!bridge->slot_get) {
printk(KERN_WARNING "vme_slot_num not supported\n");
return -EINVAL;
}
@@ -1808,7 +1782,7 @@
struct vme_bridge *bridge;
bridge = vdev->bridge;
- if (bridge == NULL) {
+ if (!bridge) {
pr_err("Can't find VME bus\n");
return -EINVAL;
}
@@ -1888,7 +1862,7 @@
struct vme_dev *tmp;
for (i = 0; i < ndevs; i++) {
- vdev = kzalloc(sizeof(struct vme_dev), GFP_KERNEL);
+ vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
if (!vdev) {
err = -ENOMEM;
goto err_devalloc;
@@ -2020,30 +1994,26 @@
static int vme_bus_probe(struct device *dev)
{
- int retval = -ENODEV;
struct vme_driver *driver;
struct vme_dev *vdev = dev_to_vme_dev(dev);
driver = dev->platform_data;
+ if (driver->probe)
+ return driver->probe(vdev);
- if (driver->probe != NULL)
- retval = driver->probe(vdev);
-
- return retval;
+ return -ENODEV;
}
static int vme_bus_remove(struct device *dev)
{
- int retval = -ENODEV;
struct vme_driver *driver;
struct vme_dev *vdev = dev_to_vme_dev(dev);
driver = dev->platform_data;
+ if (driver->remove)
+ return driver->remove(vdev);
- if (driver->remove != NULL)
- retval = driver->remove(vdev);
-
- return retval;
+ return -ENODEV;
}
struct bus_type vme_bus_type = {
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 3c945f9..7931231 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -148,4 +148,19 @@
If you are unsure, say N.
+config W1_SLAVE_DS28E17
+ tristate "1-wire-to-I2C master bridge (DS28E17)"
+ select CRC16
+ depends on I2C
+ help
+ Say Y here if you want to use the DS28E17 1-wire-to-I2C master bridge.
+ For each DS28E17 detected, a new I2C adapter is created within the
+ kernel. I2C devices on that bus can be configured to be used by the
+ kernel and userspace tools as on any other "native" I2C bus.
+
+ This driver is also available as a module. If so, the module
+ will be called w1_ds28e17.
+
+ If you are unsure, say N.
+
endmenu
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index 79c611ce..d5f4f4d 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -18,3 +18,4 @@
obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o
obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o
obj-$(CONFIG_W1_SLAVE_DS28E04) += w1_ds28e04.o
+obj-$(CONFIG_W1_SLAVE_DS28E17) += w1_ds28e17.o
diff --git a/drivers/w1/slaves/w1_ds28e17.c b/drivers/w1/slaves/w1_ds28e17.c
new file mode 100644
index 0000000..e78b63e
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds28e17.c
@@ -0,0 +1,771 @@
+/*
+ * w1_ds28e17.c - w1 family 19 (DS28E17) driver
+ *
+ * Copyright (c) 2016 Jan Kandziora <jjj@gmx.de>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/crc16.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+
+#define CRC16_INIT 0
+
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS28E17 0x19
+
+/* Module setup. */
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jan Kandziora <jjj@gmx.de>");
+MODULE_DESCRIPTION("w1 family 19 driver for DS28E17, 1-wire to I2C master bridge");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS28E17));
+
+
+/* Default I2C speed to be set when a DS28E17 is detected. */
+static int i2c_speed = 100;
+module_param_named(speed, i2c_speed, int, (S_IRUSR | S_IWUSR));
+MODULE_PARM_DESC(speed, "Default I2C speed to be set when a DS28E17 is detected");
+
+/* Default I2C stretch value to be set when a DS28E17 is detected. */
+static char i2c_stretch = 1;
+module_param_named(stretch, i2c_stretch, byte, (S_IRUSR | S_IWUSR));
+MODULE_PARM_DESC(stretch, "Default I2C stretch value to be set when a DS28E17 is detected");
+
+/* DS28E17 device command codes. */
+#define W1_F19_WRITE_DATA_WITH_STOP 0x4B
+#define W1_F19_WRITE_DATA_NO_STOP 0x5A
+#define W1_F19_WRITE_DATA_ONLY 0x69
+#define W1_F19_WRITE_DATA_ONLY_WITH_STOP 0x78
+#define W1_F19_READ_DATA_WITH_STOP 0x87
+#define W1_F19_WRITE_READ_DATA_WITH_STOP 0x2D
+#define W1_F19_WRITE_CONFIGURATION 0xD2
+#define W1_F19_READ_CONFIGURATION 0xE1
+#define W1_F19_ENABLE_SLEEP_MODE 0x1E
+#define W1_F19_READ_DEVICE_REVISION 0xC4
+
+/* DS28E17 status bits */
+#define W1_F19_STATUS_CRC 0x01
+#define W1_F19_STATUS_ADDRESS 0x02
+#define W1_F19_STATUS_START 0x08
+
+/*
+ * Maximum number of I2C bytes to transfer within one CRC16 protected onewire
+ * command.
+ * */
+#define W1_F19_WRITE_DATA_LIMIT 255
+
+/* Maximum number of I2C bytes to read with one onewire command. */
+#define W1_F19_READ_DATA_LIMIT 255
+
+/* Constants for calculating the busy sleep. */
+#define W1_F19_BUSY_TIMEBASES { 90, 23, 10 }
+#define W1_F19_BUSY_GRATUITY 1000
+
+/* Number of checks for the busy flag before timeout. */
+#define W1_F19_BUSY_CHECKS 1000
+
+
+/* Slave specific data. */
+struct w1_f19_data {
+ u8 speed;
+ u8 stretch;
+ struct i2c_adapter adapter;
+};
+
+
+/* Wait a while until the busy flag clears. */
+static int w1_f19_i2c_busy_wait(struct w1_slave *sl, size_t count)
+{
+ const unsigned long timebases[3] = W1_F19_BUSY_TIMEBASES;
+ struct w1_f19_data *data = sl->family_data;
+ unsigned int checks;
+
+ /* Check the busy flag first in any case.*/
+ if (w1_touch_bit(sl->master, 1) == 0)
+ return 0;
+
+ /*
+ * Do a generously long sleep in the beginning,
+ * as we have to wait at least this time for all
+ * the I2C bytes at the given speed to be transferred.
+ */
+ usleep_range(timebases[data->speed] * (data->stretch) * count,
+ timebases[data->speed] * (data->stretch) * count
+ + W1_F19_BUSY_GRATUITY);
+
+ /* Now continusly check the busy flag sent by the DS28E17. */
+ checks = W1_F19_BUSY_CHECKS;
+ while ((checks--) > 0) {
+ /* Return success if the busy flag is cleared. */
+ if (w1_touch_bit(sl->master, 1) == 0)
+ return 0;
+
+ /* Wait one non-streched byte timeslot. */
+ udelay(timebases[data->speed]);
+ }
+
+ /* Timeout. */
+ dev_warn(&sl->dev, "busy timeout\n");
+ return -ETIMEDOUT;
+}
+
+
+/* Utility function: result. */
+static size_t w1_f19_error(struct w1_slave *sl, u8 w1_buf[])
+{
+ /* Warnings. */
+ if (w1_buf[0] & W1_F19_STATUS_CRC)
+ dev_warn(&sl->dev, "crc16 mismatch\n");
+ if (w1_buf[0] & W1_F19_STATUS_ADDRESS)
+ dev_warn(&sl->dev, "i2c device not responding\n");
+ if ((w1_buf[0] & (W1_F19_STATUS_CRC | W1_F19_STATUS_ADDRESS)) == 0
+ && w1_buf[1] != 0) {
+ dev_warn(&sl->dev, "i2c short write, %d bytes not acknowledged\n",
+ w1_buf[1]);
+ }
+
+ /* Check error conditions. */
+ if (w1_buf[0] & W1_F19_STATUS_ADDRESS)
+ return -ENXIO;
+ if (w1_buf[0] & W1_F19_STATUS_START)
+ return -EAGAIN;
+ if (w1_buf[0] != 0 || w1_buf[1] != 0)
+ return -EIO;
+
+ /* All ok. */
+ return 0;
+}
+
+
+/* Utility function: write data to I2C slave, single chunk. */
+static int __w1_f19_i2c_write(struct w1_slave *sl,
+ const u8 *command, size_t command_count,
+ const u8 *buffer, size_t count)
+{
+ u16 crc;
+ int error;
+ u8 w1_buf[2];
+
+ /* Send command and I2C data to DS28E17. */
+ crc = crc16(CRC16_INIT, command, command_count);
+ w1_write_block(sl->master, command, command_count);
+
+ w1_buf[0] = count;
+ crc = crc16(crc, w1_buf, 1);
+ w1_write_8(sl->master, w1_buf[0]);
+
+ crc = crc16(crc, buffer, count);
+ w1_write_block(sl->master, buffer, count);
+
+ w1_buf[0] = ~(crc & 0xFF);
+ w1_buf[1] = ~((crc >> 8) & 0xFF);
+ w1_write_block(sl->master, w1_buf, 2);
+
+ /* Wait until busy flag clears (or timeout). */
+ if (w1_f19_i2c_busy_wait(sl, count + 1) < 0)
+ return -ETIMEDOUT;
+
+ /* Read status from DS28E17. */
+ w1_read_block(sl->master, w1_buf, 2);
+
+ /* Check error conditions. */
+ error = w1_f19_error(sl, w1_buf);
+ if (error < 0)
+ return error;
+
+ /* Return number of bytes written. */
+ return count;
+}
+
+
+/* Write data to I2C slave. */
+static int w1_f19_i2c_write(struct w1_slave *sl, u16 i2c_address,
+ const u8 *buffer, size_t count, bool stop)
+{
+ int result;
+ int remaining = count;
+ const u8 *p;
+ u8 command[2];
+
+ /* Check input. */
+ if (count == 0)
+ return -EOPNOTSUPP;
+
+ /* Check whether we need multiple commands. */
+ if (count <= W1_F19_WRITE_DATA_LIMIT) {
+ /*
+ * Small data amount. Data can be sent with
+ * a single onewire command.
+ */
+
+ /* Send all data to DS28E17. */
+ command[0] = (stop ? W1_F19_WRITE_DATA_WITH_STOP
+ : W1_F19_WRITE_DATA_NO_STOP);
+ command[1] = i2c_address << 1;
+ result = __w1_f19_i2c_write(sl, command, 2, buffer, count);
+ } else {
+ /* Large data amount. Data has to be sent in multiple chunks. */
+
+ /* Send first chunk to DS28E17. */
+ p = buffer;
+ command[0] = W1_F19_WRITE_DATA_NO_STOP;
+ command[1] = i2c_address << 1;
+ result = __w1_f19_i2c_write(sl, command, 2, p,
+ W1_F19_WRITE_DATA_LIMIT);
+ if (result < 0)
+ return result;
+
+ /* Resume to same DS28E17. */
+ if (w1_reset_resume_command(sl->master))
+ return -EIO;
+
+ /* Next data chunk. */
+ p += W1_F19_WRITE_DATA_LIMIT;
+ remaining -= W1_F19_WRITE_DATA_LIMIT;
+
+ while (remaining > W1_F19_WRITE_DATA_LIMIT) {
+ /* Send intermediate chunk to DS28E17. */
+ command[0] = W1_F19_WRITE_DATA_ONLY;
+ result = __w1_f19_i2c_write(sl, command, 1, p,
+ W1_F19_WRITE_DATA_LIMIT);
+ if (result < 0)
+ return result;
+
+ /* Resume to same DS28E17. */
+ if (w1_reset_resume_command(sl->master))
+ return -EIO;
+
+ /* Next data chunk. */
+ p += W1_F19_WRITE_DATA_LIMIT;
+ remaining -= W1_F19_WRITE_DATA_LIMIT;
+ }
+
+ /* Send final chunk to DS28E17. */
+ command[0] = (stop ? W1_F19_WRITE_DATA_ONLY_WITH_STOP
+ : W1_F19_WRITE_DATA_ONLY);
+ result = __w1_f19_i2c_write(sl, command, 1, p, remaining);
+ }
+
+ return result;
+}
+
+
+/* Read data from I2C slave. */
+static int w1_f19_i2c_read(struct w1_slave *sl, u16 i2c_address,
+ u8 *buffer, size_t count)
+{
+ u16 crc;
+ int error;
+ u8 w1_buf[5];
+
+ /* Check input. */
+ if (count == 0)
+ return -EOPNOTSUPP;
+
+ /* Send command to DS28E17. */
+ w1_buf[0] = W1_F19_READ_DATA_WITH_STOP;
+ w1_buf[1] = i2c_address << 1 | 0x01;
+ w1_buf[2] = count;
+ crc = crc16(CRC16_INIT, w1_buf, 3);
+ w1_buf[3] = ~(crc & 0xFF);
+ w1_buf[4] = ~((crc >> 8) & 0xFF);
+ w1_write_block(sl->master, w1_buf, 5);
+
+ /* Wait until busy flag clears (or timeout). */
+ if (w1_f19_i2c_busy_wait(sl, count + 1) < 0)
+ return -ETIMEDOUT;
+
+ /* Read status from DS28E17. */
+ w1_buf[0] = w1_read_8(sl->master);
+ w1_buf[1] = 0;
+
+ /* Check error conditions. */
+ error = w1_f19_error(sl, w1_buf);
+ if (error < 0)
+ return error;
+
+ /* Read received I2C data from DS28E17. */
+ return w1_read_block(sl->master, buffer, count);
+}
+
+
+/* Write to, then read data from I2C slave. */
+static int w1_f19_i2c_write_read(struct w1_slave *sl, u16 i2c_address,
+ const u8 *wbuffer, size_t wcount, u8 *rbuffer, size_t rcount)
+{
+ u16 crc;
+ int error;
+ u8 w1_buf[3];
+
+ /* Check input. */
+ if (wcount == 0 || rcount == 0)
+ return -EOPNOTSUPP;
+
+ /* Send command and I2C data to DS28E17. */
+ w1_buf[0] = W1_F19_WRITE_READ_DATA_WITH_STOP;
+ w1_buf[1] = i2c_address << 1;
+ w1_buf[2] = wcount;
+ crc = crc16(CRC16_INIT, w1_buf, 3);
+ w1_write_block(sl->master, w1_buf, 3);
+
+ crc = crc16(crc, wbuffer, wcount);
+ w1_write_block(sl->master, wbuffer, wcount);
+
+ w1_buf[0] = rcount;
+ crc = crc16(crc, w1_buf, 1);
+ w1_buf[1] = ~(crc & 0xFF);
+ w1_buf[2] = ~((crc >> 8) & 0xFF);
+ w1_write_block(sl->master, w1_buf, 3);
+
+ /* Wait until busy flag clears (or timeout). */
+ if (w1_f19_i2c_busy_wait(sl, wcount + rcount + 2) < 0)
+ return -ETIMEDOUT;
+
+ /* Read status from DS28E17. */
+ w1_read_block(sl->master, w1_buf, 2);
+
+ /* Check error conditions. */
+ error = w1_f19_error(sl, w1_buf);
+ if (error < 0)
+ return error;
+
+ /* Read received I2C data from DS28E17. */
+ return w1_read_block(sl->master, rbuffer, rcount);
+}
+
+
+/* Do an I2C master transfer. */
+static int w1_f19_i2c_master_transfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs, int num)
+{
+ struct w1_slave *sl = (struct w1_slave *) adapter->algo_data;
+ int i = 0;
+ int result = 0;
+
+ /* Start onewire transaction. */
+ mutex_lock(&sl->master->bus_mutex);
+
+ /* Select DS28E17. */
+ if (w1_reset_select_slave(sl)) {
+ i = -EIO;
+ goto error;
+ }
+
+ /* Loop while there are still messages to transfer. */
+ while (i < num) {
+ /*
+ * Check for special case: Small write followed
+ * by read to same I2C device.
+ */
+ if (i < (num-1)
+ && msgs[i].addr == msgs[i+1].addr
+ && !(msgs[i].flags & I2C_M_RD)
+ && (msgs[i+1].flags & I2C_M_RD)
+ && (msgs[i].len <= W1_F19_WRITE_DATA_LIMIT)) {
+ /*
+ * The DS28E17 has a combined transfer
+ * for small write+read.
+ */
+ result = w1_f19_i2c_write_read(sl, msgs[i].addr,
+ msgs[i].buf, msgs[i].len,
+ msgs[i+1].buf, msgs[i+1].len);
+ if (result < 0) {
+ i = result;
+ goto error;
+ }
+
+ /*
+ * Check if we should interpret the read data
+ * as a length byte. The DS28E17 unfortunately
+ * has no read without stop, so we can just do
+ * another simple read in that case.
+ */
+ if (msgs[i+1].flags & I2C_M_RECV_LEN) {
+ result = w1_f19_i2c_read(sl, msgs[i+1].addr,
+ &(msgs[i+1].buf[1]), msgs[i+1].buf[0]);
+ if (result < 0) {
+ i = result;
+ goto error;
+ }
+ }
+
+ /* Eat up read message, too. */
+ i++;
+ } else if (msgs[i].flags & I2C_M_RD) {
+ /* Read transfer. */
+ result = w1_f19_i2c_read(sl, msgs[i].addr,
+ msgs[i].buf, msgs[i].len);
+ if (result < 0) {
+ i = result;
+ goto error;
+ }
+
+ /*
+ * Check if we should interpret the read data
+ * as a length byte. The DS28E17 unfortunately
+ * has no read without stop, so we can just do
+ * another simple read in that case.
+ */
+ if (msgs[i].flags & I2C_M_RECV_LEN) {
+ result = w1_f19_i2c_read(sl,
+ msgs[i].addr,
+ &(msgs[i].buf[1]),
+ msgs[i].buf[0]);
+ if (result < 0) {
+ i = result;
+ goto error;
+ }
+ }
+ } else {
+ /*
+ * Write transfer.
+ * Stop condition only for last
+ * transfer.
+ */
+ result = w1_f19_i2c_write(sl,
+ msgs[i].addr,
+ msgs[i].buf,
+ msgs[i].len,
+ i == (num-1));
+ if (result < 0) {
+ i = result;
+ goto error;
+ }
+ }
+
+ /* Next message. */
+ i++;
+
+ /* Are there still messages to send/receive? */
+ if (i < num) {
+ /* Yes. Resume to same DS28E17. */
+ if (w1_reset_resume_command(sl->master)) {
+ i = -EIO;
+ goto error;
+ }
+ }
+ }
+
+error:
+ /* End onewire transaction. */
+ mutex_unlock(&sl->master->bus_mutex);
+
+ /* Return number of messages processed or error. */
+ return i;
+}
+
+
+/* Get I2C adapter functionality. */
+static u32 w1_f19_i2c_functionality(struct i2c_adapter *adapter)
+{
+ /*
+ * Plain I2C functions only.
+ * SMBus is emulated by the kernel's I2C layer.
+ * No "I2C_FUNC_SMBUS_QUICK"
+ * No "I2C_FUNC_SMBUS_READ_BLOCK_DATA"
+ * No "I2C_FUNC_SMBUS_BLOCK_PROC_CALL"
+ */
+ return I2C_FUNC_I2C |
+ I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_PROC_CALL |
+ I2C_FUNC_SMBUS_WRITE_BLOCK_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK |
+ I2C_FUNC_SMBUS_PEC;
+}
+
+
+/* I2C adapter quirks. */
+static const struct i2c_adapter_quirks w1_f19_i2c_adapter_quirks = {
+ .max_read_len = W1_F19_READ_DATA_LIMIT,
+};
+
+/* I2C algorithm. */
+static const struct i2c_algorithm w1_f19_i2c_algorithm = {
+ .master_xfer = w1_f19_i2c_master_transfer,
+ .functionality = w1_f19_i2c_functionality,
+};
+
+
+/* Read I2C speed from DS28E17. */
+static int w1_f19_get_i2c_speed(struct w1_slave *sl)
+{
+ struct w1_f19_data *data = sl->family_data;
+ int result = -EIO;
+
+ /* Start onewire transaction. */
+ mutex_lock(&sl->master->bus_mutex);
+
+ /* Select slave. */
+ if (w1_reset_select_slave(sl))
+ goto error;
+
+ /* Read slave configuration byte. */
+ w1_write_8(sl->master, W1_F19_READ_CONFIGURATION);
+ result = w1_read_8(sl->master);
+ if (result < 0 || result > 2) {
+ result = -EIO;
+ goto error;
+ }
+
+ /* Update speed in slave specific data. */
+ data->speed = result;
+
+error:
+ /* End onewire transaction. */
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return result;
+}
+
+
+/* Set I2C speed on DS28E17. */
+static int __w1_f19_set_i2c_speed(struct w1_slave *sl, u8 speed)
+{
+ struct w1_f19_data *data = sl->family_data;
+ const int i2c_speeds[3] = { 100, 400, 900 };
+ u8 w1_buf[2];
+
+ /* Select slave. */
+ if (w1_reset_select_slave(sl))
+ return -EIO;
+
+ w1_buf[0] = W1_F19_WRITE_CONFIGURATION;
+ w1_buf[1] = speed;
+ w1_write_block(sl->master, w1_buf, 2);
+
+ /* Update speed in slave specific data. */
+ data->speed = speed;
+
+ dev_info(&sl->dev, "i2c speed set to %d kBaud\n", i2c_speeds[speed]);
+
+ return 0;
+}
+
+static int w1_f19_set_i2c_speed(struct w1_slave *sl, u8 speed)
+{
+ int result;
+
+ /* Start onewire transaction. */
+ mutex_lock(&sl->master->bus_mutex);
+
+ /* Set I2C speed on DS28E17. */
+ result = __w1_f19_set_i2c_speed(sl, speed);
+
+ /* End onewire transaction. */
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return result;
+}
+
+
+/* Sysfs attributes. */
+
+/* I2C speed attribute for a single chip. */
+static ssize_t speed_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct w1_slave *sl = dev_to_w1_slave(dev);
+ int result;
+
+ /* Read current speed from slave. Updates data->speed. */
+ result = w1_f19_get_i2c_speed(sl);
+ if (result < 0)
+ return result;
+
+ /* Return current speed value. */
+ return sprintf(buf, "%d\n", result);
+}
+
+static ssize_t speed_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct w1_slave *sl = dev_to_w1_slave(dev);
+ int error;
+
+ /* Valid values are: "100", "400", "900" */
+ if (count < 3 || count > 4 || !buf)
+ return -EINVAL;
+ if (count == 4 && buf[3] != '\n')
+ return -EINVAL;
+ if (buf[1] != '0' || buf[2] != '0')
+ return -EINVAL;
+
+ /* Set speed on slave. */
+ switch (buf[0]) {
+ case '1':
+ error = w1_f19_set_i2c_speed(sl, 0);
+ break;
+ case '4':
+ error = w1_f19_set_i2c_speed(sl, 1);
+ break;
+ case '9':
+ error = w1_f19_set_i2c_speed(sl, 2);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (error < 0)
+ return error;
+
+ /* Return bytes written. */
+ return count;
+}
+
+static DEVICE_ATTR_RW(speed);
+
+
+/* Busy stretch attribute for a single chip. */
+static ssize_t stretch_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct w1_slave *sl = dev_to_w1_slave(dev);
+ struct w1_f19_data *data = sl->family_data;
+
+ /* Return current stretch value. */
+ return sprintf(buf, "%d\n", data->stretch);
+}
+
+static ssize_t stretch_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct w1_slave *sl = dev_to_w1_slave(dev);
+ struct w1_f19_data *data = sl->family_data;
+
+ /* Valid values are '1' to '9' */
+ if (count < 1 || count > 2 || !buf)
+ return -EINVAL;
+ if (count == 2 && buf[1] != '\n')
+ return -EINVAL;
+ if (buf[0] < '1' || buf[0] > '9')
+ return -EINVAL;
+
+ /* Set busy stretch value. */
+ data->stretch = buf[0] & 0x0F;
+
+ /* Return bytes written. */
+ return count;
+}
+
+static DEVICE_ATTR_RW(stretch);
+
+
+/* All attributes. */
+static struct attribute *w1_f19_attrs[] = {
+ &dev_attr_speed.attr,
+ &dev_attr_stretch.attr,
+ NULL,
+};
+
+static const struct attribute_group w1_f19_group = {
+ .attrs = w1_f19_attrs,
+};
+
+static const struct attribute_group *w1_f19_groups[] = {
+ &w1_f19_group,
+ NULL,
+};
+
+
+/* Slave add and remove functions. */
+static int w1_f19_add_slave(struct w1_slave *sl)
+{
+ struct w1_f19_data *data = NULL;
+
+ /* Allocate memory for slave specific data. */
+ data = devm_kzalloc(&sl->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ sl->family_data = data;
+
+ /* Setup default I2C speed on slave. */
+ switch (i2c_speed) {
+ case 100:
+ __w1_f19_set_i2c_speed(sl, 0);
+ break;
+ case 400:
+ __w1_f19_set_i2c_speed(sl, 1);
+ break;
+ case 900:
+ __w1_f19_set_i2c_speed(sl, 2);
+ break;
+ default:
+ /*
+ * A i2c_speed module parameter of anything else
+ * than 100, 400, 900 means not to touch the
+ * speed of the DS28E17.
+ * We assume 400kBaud, the power-on value.
+ */
+ data->speed = 1;
+ }
+
+ /*
+ * Setup default busy stretch
+ * configuration for the DS28E17.
+ */
+ data->stretch = i2c_stretch;
+
+ /* Setup I2C adapter. */
+ data->adapter.owner = THIS_MODULE;
+ data->adapter.algo = &w1_f19_i2c_algorithm;
+ data->adapter.algo_data = sl;
+ strcpy(data->adapter.name, "w1-");
+ strcat(data->adapter.name, sl->name);
+ data->adapter.dev.parent = &sl->dev;
+ data->adapter.quirks = &w1_f19_i2c_adapter_quirks;
+
+ return i2c_add_adapter(&data->adapter);
+}
+
+static void w1_f19_remove_slave(struct w1_slave *sl)
+{
+ struct w1_f19_data *family_data = sl->family_data;
+
+ /* Delete I2C adapter. */
+ i2c_del_adapter(&family_data->adapter);
+
+ /* Free slave specific data. */
+ devm_kfree(&sl->dev, family_data);
+ sl->family_data = NULL;
+}
+
+
+/* Declarations within the w1 subsystem. */
+static struct w1_family_ops w1_f19_fops = {
+ .add_slave = w1_f19_add_slave,
+ .remove_slave = w1_f19_remove_slave,
+ .groups = w1_f19_groups,
+};
+
+static struct w1_family w1_family_19 = {
+ .fid = W1_FAMILY_DS28E17,
+ .fops = &w1_f19_fops,
+};
+
+
+/* Module init and remove functions. */
+static int __init w1_f19_init(void)
+{
+ return w1_register_family(&w1_family_19);
+}
+
+static void __exit w1_f19_fini(void)
+{
+ w1_unregister_family(&w1_family_19);
+}
+
+module_init(w1_f19_init);
+module_exit(w1_f19_fini);
+
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 259525c3..3c350df 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -268,17 +268,18 @@
int ret, max_trying = 10;
u8 *family_data = sl->family_data;
- ret = mutex_lock_interruptible(&dev->bus_mutex);
- if (ret != 0)
- goto post_unlock;
-
if (!sl->family_data) {
ret = -ENODEV;
- goto pre_unlock;
+ goto error;
}
/* prevent the slave from going away in sleep */
atomic_inc(THERM_REFCNT(family_data));
+
+ ret = mutex_lock_interruptible(&dev->bus_mutex);
+ if (ret != 0)
+ goto dec_refcnt;
+
memset(rom, 0, sizeof(rom));
while (max_trying--) {
@@ -306,17 +307,17 @@
sleep_rem = msleep_interruptible(tm);
if (sleep_rem != 0) {
ret = -EINTR;
- goto post_unlock;
+ goto dec_refcnt;
}
ret = mutex_lock_interruptible(&dev->bus_mutex);
if (ret != 0)
- goto post_unlock;
+ goto dec_refcnt;
} else if (!w1_strong_pullup) {
sleep_rem = msleep_interruptible(tm);
if (sleep_rem != 0) {
ret = -EINTR;
- goto pre_unlock;
+ goto mt_unlock;
}
}
@@ -324,11 +325,11 @@
}
}
-pre_unlock:
+mt_unlock:
mutex_unlock(&dev->bus_mutex);
-
-post_unlock:
+dec_refcnt:
atomic_dec(THERM_REFCNT(family_data));
+error:
return ret;
}
@@ -350,20 +351,22 @@
if (val > 12 || val < 9) {
pr_warn("Unsupported precision\n");
- return -1;
+ ret = -EINVAL;
+ goto error;
}
- ret = mutex_lock_interruptible(&dev->bus_mutex);
- if (ret != 0)
- goto post_unlock;
-
if (!sl->family_data) {
ret = -ENODEV;
- goto pre_unlock;
+ goto error;
}
/* prevent the slave from going away in sleep */
atomic_inc(THERM_REFCNT(family_data));
+
+ ret = mutex_lock_interruptible(&dev->bus_mutex);
+ if (ret != 0)
+ goto dec_refcnt;
+
memset(rom, 0, sizeof(rom));
/* translate precision to bitmask (see datasheet page 9) */
@@ -411,11 +414,10 @@
}
}
-pre_unlock:
mutex_unlock(&dev->bus_mutex);
-
-post_unlock:
+dec_refcnt:
atomic_dec(THERM_REFCNT(family_data));
+error:
return ret;
}
@@ -490,17 +492,18 @@
int ret, max_trying = 10;
u8 *family_data = sl->family_data;
- ret = mutex_lock_interruptible(&dev->bus_mutex);
- if (ret != 0)
- goto error;
-
if (!family_data) {
ret = -ENODEV;
- goto mt_unlock;
+ goto error;
}
/* prevent the slave from going away in sleep */
atomic_inc(THERM_REFCNT(family_data));
+
+ ret = mutex_lock_interruptible(&dev->bus_mutex);
+ if (ret != 0)
+ goto dec_refcnt;
+
memset(info->rom, 0, sizeof(info->rom));
while (max_trying--) {
@@ -542,7 +545,7 @@
sleep_rem = msleep_interruptible(tm);
if (sleep_rem != 0) {
ret = -EINTR;
- goto dec_refcnt;
+ goto mt_unlock;
}
}
@@ -567,10 +570,10 @@
break;
}
-dec_refcnt:
- atomic_dec(THERM_REFCNT(family_data));
mt_unlock:
mutex_unlock(&dev->bus_mutex);
+dec_refcnt:
+ atomic_dec(THERM_REFCNT(family_data));
error:
return ret;
}
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index d191e1f..075d120 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -58,7 +58,7 @@
* @dev: the master device
* @bit: 0 - write a 0, 1 - write a 0 read the level
*/
-static u8 w1_touch_bit(struct w1_master *dev, int bit)
+u8 w1_touch_bit(struct w1_master *dev, int bit)
{
if (dev->bus_master->touch_bit)
return dev->bus_master->touch_bit(dev->bus_master->data, bit);
@@ -69,6 +69,7 @@
return 0;
}
}
+EXPORT_SYMBOL_GPL(w1_touch_bit);
/**
* w1_write_bit() - Generates a write-0 or write-1 cycle.
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 6431087..f3e97c5 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -719,6 +719,10 @@
struct vmbus_close_msg close_msg;
+ /* Statistics */
+ u64 interrupts; /* Host to Guest interrupts */
+ u64 sig_events; /* Guest to Host events */
+
/* Channel callback's invoked in softirq context */
struct tasklet_struct callback_event;
void (*onchannel_callback)(void *context);
@@ -829,6 +833,11 @@
struct rcu_head rcu;
/*
+ * For sysfs per-channel properties.
+ */
+ struct kobject kobj;
+
+ /*
* For performance critical channels (storage, networking
* etc,), Hyper-V has a mechanism to enhance the throughput
* at the expense of latency:
@@ -1089,6 +1098,7 @@
struct device device;
struct vmbus_channel *channel;
+ struct kset *channels_kset;
};
diff --git a/include/linux/w1.h b/include/linux/w1.h
index 5b29729..694101f 100644
--- a/include/linux/w1.h
+++ b/include/linux/w1.h
@@ -293,6 +293,7 @@
w1_unregister_family)
u8 w1_triplet(struct w1_master *dev, int bdir);
+u8 w1_touch_bit(struct w1_master *dev, int bit);
void w1_write_8(struct w1_master *, u8);
u8 w1_read_8(struct w1_master *);
int w1_reset_bus(struct w1_master *);
