| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * Dove thermal sensor driver | 
 |  * | 
 |  * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch> | 
 |  */ | 
 | #include <linux/device.h> | 
 | #include <linux/err.h> | 
 | #include <linux/io.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/of.h> | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/thermal.h> | 
 |  | 
 | #define DOVE_THERMAL_TEMP_OFFSET	1 | 
 | #define DOVE_THERMAL_TEMP_MASK		0x1FF | 
 |  | 
 | /* Dove Thermal Manager Control and Status Register */ | 
 | #define PMU_TM_DISABLE_OFFS		0 | 
 | #define PMU_TM_DISABLE_MASK		(0x1 << PMU_TM_DISABLE_OFFS) | 
 |  | 
 | /* Dove Theraml Diode Control 0 Register */ | 
 | #define PMU_TDC0_SW_RST_MASK		(0x1 << 1) | 
 | #define PMU_TDC0_SEL_VCAL_OFFS		5 | 
 | #define PMU_TDC0_SEL_VCAL_MASK		(0x3 << PMU_TDC0_SEL_VCAL_OFFS) | 
 | #define PMU_TDC0_REF_CAL_CNT_OFFS	11 | 
 | #define PMU_TDC0_REF_CAL_CNT_MASK	(0x1FF << PMU_TDC0_REF_CAL_CNT_OFFS) | 
 | #define PMU_TDC0_AVG_NUM_OFFS		25 | 
 | #define PMU_TDC0_AVG_NUM_MASK		(0x7 << PMU_TDC0_AVG_NUM_OFFS) | 
 |  | 
 | /* Dove Thermal Diode Control 1 Register */ | 
 | #define PMU_TEMP_DIOD_CTRL1_REG		0x04 | 
 | #define PMU_TDC1_TEMP_VALID_MASK	(0x1 << 10) | 
 |  | 
 | /* Dove Thermal Sensor Dev Structure */ | 
 | struct dove_thermal_priv { | 
 | 	void __iomem *sensor; | 
 | 	void __iomem *control; | 
 | }; | 
 |  | 
 | static int dove_init_sensor(const struct dove_thermal_priv *priv) | 
 | { | 
 | 	u32 reg; | 
 | 	u32 i; | 
 |  | 
 | 	/* Configure the Diode Control Register #0 */ | 
 | 	reg = readl_relaxed(priv->control); | 
 |  | 
 | 	/* Use average of 2 */ | 
 | 	reg &= ~PMU_TDC0_AVG_NUM_MASK; | 
 | 	reg |= (0x1 << PMU_TDC0_AVG_NUM_OFFS); | 
 |  | 
 | 	/* Reference calibration value */ | 
 | 	reg &= ~PMU_TDC0_REF_CAL_CNT_MASK; | 
 | 	reg |= (0x0F1 << PMU_TDC0_REF_CAL_CNT_OFFS); | 
 |  | 
 | 	/* Set the high level reference for calibration */ | 
 | 	reg &= ~PMU_TDC0_SEL_VCAL_MASK; | 
 | 	reg |= (0x2 << PMU_TDC0_SEL_VCAL_OFFS); | 
 | 	writel(reg, priv->control); | 
 |  | 
 | 	/* Reset the sensor */ | 
 | 	reg = readl_relaxed(priv->control); | 
 | 	writel((reg | PMU_TDC0_SW_RST_MASK), priv->control); | 
 | 	writel(reg, priv->control); | 
 |  | 
 | 	/* Enable the sensor */ | 
 | 	reg = readl_relaxed(priv->sensor); | 
 | 	reg &= ~PMU_TM_DISABLE_MASK; | 
 | 	writel(reg, priv->sensor); | 
 |  | 
 | 	/* Poll the sensor for the first reading */ | 
 | 	for (i = 0; i < 1000000; i++) { | 
 | 		reg = readl_relaxed(priv->sensor); | 
 | 		if (reg & DOVE_THERMAL_TEMP_MASK) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	if (i == 1000000) | 
 | 		return -EIO; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dove_get_temp(struct thermal_zone_device *thermal, | 
 | 			  int *temp) | 
 | { | 
 | 	unsigned long reg; | 
 | 	struct dove_thermal_priv *priv = thermal_zone_device_priv(thermal); | 
 |  | 
 | 	/* Valid check */ | 
 | 	reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG); | 
 | 	if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0) | 
 | 		return -EIO; | 
 |  | 
 | 	/* | 
 | 	 * Calculate temperature. According to Marvell internal | 
 | 	 * documentation the formula for this is: | 
 | 	 * Celsius = (322-reg)/1.3625 | 
 | 	 */ | 
 | 	reg = readl_relaxed(priv->sensor); | 
 | 	reg = (reg >> DOVE_THERMAL_TEMP_OFFSET) & DOVE_THERMAL_TEMP_MASK; | 
 | 	*temp = ((3220000000UL - (10000000UL * reg)) / 13625); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct thermal_zone_device_ops ops = { | 
 | 	.get_temp = dove_get_temp, | 
 | }; | 
 |  | 
 | static const struct of_device_id dove_thermal_id_table[] = { | 
 | 	{ .compatible = "marvell,dove-thermal" }, | 
 | 	{} | 
 | }; | 
 |  | 
 | static int dove_thermal_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct thermal_zone_device *thermal = NULL; | 
 | 	struct dove_thermal_priv *priv; | 
 | 	int ret; | 
 |  | 
 | 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); | 
 | 	if (!priv) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	priv->sensor = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); | 
 | 	if (IS_ERR(priv->sensor)) | 
 | 		return PTR_ERR(priv->sensor); | 
 |  | 
 | 	priv->control = devm_platform_get_and_ioremap_resource(pdev, 1, NULL); | 
 | 	if (IS_ERR(priv->control)) | 
 | 		return PTR_ERR(priv->control); | 
 |  | 
 | 	ret = dove_init_sensor(priv); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "Failed to initialize sensor\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	thermal = thermal_tripless_zone_device_register("dove_thermal", priv, | 
 | 							&ops, NULL); | 
 | 	if (IS_ERR(thermal)) { | 
 | 		dev_err(&pdev->dev, | 
 | 			"Failed to register thermal zone device\n"); | 
 | 		return PTR_ERR(thermal); | 
 | 	} | 
 |  | 
 | 	ret = thermal_zone_device_enable(thermal); | 
 | 	if (ret) { | 
 | 		thermal_zone_device_unregister(thermal); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, thermal); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void dove_thermal_exit(struct platform_device *pdev) | 
 | { | 
 | 	struct thermal_zone_device *dove_thermal = | 
 | 		platform_get_drvdata(pdev); | 
 |  | 
 | 	thermal_zone_device_unregister(dove_thermal); | 
 | } | 
 |  | 
 | MODULE_DEVICE_TABLE(of, dove_thermal_id_table); | 
 |  | 
 | static struct platform_driver dove_thermal_driver = { | 
 | 	.probe = dove_thermal_probe, | 
 | 	.remove = dove_thermal_exit, | 
 | 	.driver = { | 
 | 		.name = "dove_thermal", | 
 | 		.of_match_table = dove_thermal_id_table, | 
 | 	}, | 
 | }; | 
 |  | 
 | module_platform_driver(dove_thermal_driver); | 
 |  | 
 | MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>"); | 
 | MODULE_DESCRIPTION("Dove thermal driver"); | 
 | MODULE_LICENSE("GPL"); |