|  | /* | 
|  | * This file is subject to the terms and conditions of the GNU General Public | 
|  | * License.  See the file "COPYING" in the main directory of this archive | 
|  | * for more details. | 
|  | * | 
|  | * Copyright (C) 1995 Linus Torvalds | 
|  | * Copyright (C) 1995 Waldorf Electronics | 
|  | * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03  Ralf Baechle | 
|  | * Copyright (C) 1996 Stoned Elipot | 
|  | * Copyright (C) 1999 Silicon Graphics, Inc. | 
|  | * Copyright (C) 2000, 2001, 2002, 2007	 Maciej W. Rozycki | 
|  | */ | 
|  | #include <linux/init.h> | 
|  | #include <linux/cpu.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/memblock.h> | 
|  | #include <linux/initrd.h> | 
|  | #include <linux/root_dev.h> | 
|  | #include <linux/highmem.h> | 
|  | #include <linux/console.h> | 
|  | #include <linux/pfn.h> | 
|  | #include <linux/debugfs.h> | 
|  | #include <linux/kexec.h> | 
|  | #include <linux/sizes.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/dma-map-ops.h> | 
|  | #include <linux/decompress/generic.h> | 
|  | #include <linux/of_fdt.h> | 
|  | #include <linux/dmi.h> | 
|  | #include <linux/crash_dump.h> | 
|  |  | 
|  | #include <asm/addrspace.h> | 
|  | #include <asm/bootinfo.h> | 
|  | #include <asm/bugs.h> | 
|  | #include <asm/cache.h> | 
|  | #include <asm/cdmm.h> | 
|  | #include <asm/cpu.h> | 
|  | #include <asm/debug.h> | 
|  | #include <asm/mmzone.h> | 
|  | #include <asm/sections.h> | 
|  | #include <asm/setup.h> | 
|  | #include <asm/smp-ops.h> | 
|  | #include <asm/mips-cps.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/fw/fw.h> | 
|  |  | 
|  | #ifdef CONFIG_MIPS_ELF_APPENDED_DTB | 
|  | char __section(".appended_dtb") __appended_dtb[0x100000]; | 
|  | #endif /* CONFIG_MIPS_ELF_APPENDED_DTB */ | 
|  |  | 
|  | struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly; | 
|  |  | 
|  | EXPORT_SYMBOL(cpu_data); | 
|  |  | 
|  | /* | 
|  | * Setup information | 
|  | * | 
|  | * These are initialized so they are in the .data section | 
|  | */ | 
|  | unsigned long mips_machtype __read_mostly = MACH_UNKNOWN; | 
|  |  | 
|  | EXPORT_SYMBOL(mips_machtype); | 
|  |  | 
|  | static char __initdata command_line[COMMAND_LINE_SIZE]; | 
|  | char __initdata arcs_cmdline[COMMAND_LINE_SIZE]; | 
|  |  | 
|  | #ifdef CONFIG_CMDLINE_BOOL | 
|  | static const char builtin_cmdline[] __initconst = CONFIG_CMDLINE; | 
|  | #else | 
|  | static const char builtin_cmdline[] __initconst = ""; | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * mips_io_port_base is the begin of the address space to which x86 style | 
|  | * I/O ports are mapped. | 
|  | */ | 
|  | unsigned long mips_io_port_base = -1; | 
|  | EXPORT_SYMBOL(mips_io_port_base); | 
|  |  | 
|  | static struct resource code_resource = { .name = "Kernel code", }; | 
|  | static struct resource data_resource = { .name = "Kernel data", }; | 
|  | static struct resource bss_resource = { .name = "Kernel bss", }; | 
|  |  | 
|  | unsigned long __kaslr_offset __ro_after_init; | 
|  | EXPORT_SYMBOL(__kaslr_offset); | 
|  |  | 
|  | static void *detect_magic __initdata = detect_memory_region; | 
|  |  | 
|  | #ifdef CONFIG_MIPS_AUTO_PFN_OFFSET | 
|  | unsigned long ARCH_PFN_OFFSET; | 
|  | EXPORT_SYMBOL(ARCH_PFN_OFFSET); | 
|  | #endif | 
|  |  | 
|  | void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_addr_t sz_max) | 
|  | { | 
|  | void *dm = &detect_magic; | 
|  | phys_addr_t size; | 
|  |  | 
|  | for (size = sz_min; size < sz_max; size <<= 1) { | 
|  | if (!memcmp(dm, dm + size, sizeof(detect_magic))) | 
|  | break; | 
|  | } | 
|  |  | 
|  | pr_debug("Memory: %lluMB of RAM detected at 0x%llx (min: %lluMB, max: %lluMB)\n", | 
|  | ((unsigned long long) size) / SZ_1M, | 
|  | (unsigned long long) start, | 
|  | ((unsigned long long) sz_min) / SZ_1M, | 
|  | ((unsigned long long) sz_max) / SZ_1M); | 
|  |  | 
|  | memblock_add(start, size); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Manage initrd | 
|  | */ | 
|  | #ifdef CONFIG_BLK_DEV_INITRD | 
|  |  | 
|  | static int __init rd_start_early(char *p) | 
|  | { | 
|  | unsigned long start = memparse(p, &p); | 
|  |  | 
|  | #ifdef CONFIG_64BIT | 
|  | /* Guess if the sign extension was forgotten by bootloader */ | 
|  | if (start < XKPHYS) | 
|  | start = (int)start; | 
|  | #endif | 
|  | initrd_start = start; | 
|  | initrd_end += start; | 
|  | return 0; | 
|  | } | 
|  | early_param("rd_start", rd_start_early); | 
|  |  | 
|  | static int __init rd_size_early(char *p) | 
|  | { | 
|  | initrd_end += memparse(p, &p); | 
|  | return 0; | 
|  | } | 
|  | early_param("rd_size", rd_size_early); | 
|  |  | 
|  | /* it returns the next free pfn after initrd */ | 
|  | static unsigned long __init init_initrd(void) | 
|  | { | 
|  | unsigned long end; | 
|  |  | 
|  | /* | 
|  | * Board specific code or command line parser should have | 
|  | * already set up initrd_start and initrd_end. In these cases | 
|  | * perform sanity checks and use them if all looks good. | 
|  | */ | 
|  | if (!initrd_start || initrd_end <= initrd_start) | 
|  | goto disable; | 
|  |  | 
|  | if (initrd_start & ~PAGE_MASK) { | 
|  | pr_err("initrd start must be page aligned\n"); | 
|  | goto disable; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sanitize initrd addresses. For example firmware | 
|  | * can't guess if they need to pass them through | 
|  | * 64-bits values if the kernel has been built in pure | 
|  | * 32-bit. We need also to switch from KSEG0 to XKPHYS | 
|  | * addresses now, so the code can now safely use __pa(). | 
|  | */ | 
|  | end = __pa(initrd_end); | 
|  | initrd_end = (unsigned long)__va(end); | 
|  | initrd_start = (unsigned long)__va(__pa(initrd_start)); | 
|  |  | 
|  | if (initrd_start < PAGE_OFFSET) { | 
|  | pr_err("initrd start < PAGE_OFFSET\n"); | 
|  | goto disable; | 
|  | } | 
|  |  | 
|  | ROOT_DEV = Root_RAM0; | 
|  | return PFN_UP(end); | 
|  | disable: | 
|  | initrd_start = 0; | 
|  | initrd_end = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* In some conditions (e.g. big endian bootloader with a little endian | 
|  | kernel), the initrd might appear byte swapped.  Try to detect this and | 
|  | byte swap it if needed.  */ | 
|  | static void __init maybe_bswap_initrd(void) | 
|  | { | 
|  | #if defined(CONFIG_CPU_CAVIUM_OCTEON) | 
|  | u64 buf; | 
|  |  | 
|  | /* Check for CPIO signature */ | 
|  | if (!memcmp((void *)initrd_start, "070701", 6)) | 
|  | return; | 
|  |  | 
|  | /* Check for compressed initrd */ | 
|  | if (decompress_method((unsigned char *)initrd_start, 8, NULL)) | 
|  | return; | 
|  |  | 
|  | /* Try again with a byte swapped header */ | 
|  | buf = swab64p((u64 *)initrd_start); | 
|  | if (!memcmp(&buf, "070701", 6) || | 
|  | decompress_method((unsigned char *)(&buf), 8, NULL)) { | 
|  | unsigned long i; | 
|  |  | 
|  | pr_info("Byteswapped initrd detected\n"); | 
|  | for (i = initrd_start; i < ALIGN(initrd_end, 8); i += 8) | 
|  | swab64s((u64 *)i); | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static void __init finalize_initrd(void) | 
|  | { | 
|  | unsigned long size = initrd_end - initrd_start; | 
|  |  | 
|  | if (size == 0) { | 
|  | printk(KERN_INFO "Initrd not found or empty"); | 
|  | goto disable; | 
|  | } | 
|  | if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) { | 
|  | printk(KERN_ERR "Initrd extends beyond end of memory"); | 
|  | goto disable; | 
|  | } | 
|  |  | 
|  | maybe_bswap_initrd(); | 
|  |  | 
|  | memblock_reserve(__pa(initrd_start), size); | 
|  | initrd_below_start_ok = 1; | 
|  |  | 
|  | pr_info("Initial ramdisk at: 0x%lx (%lu bytes)\n", | 
|  | initrd_start, size); | 
|  | return; | 
|  | disable: | 
|  | printk(KERN_CONT " - disabling initrd\n"); | 
|  | initrd_start = 0; | 
|  | initrd_end = 0; | 
|  | } | 
|  |  | 
|  | #else  /* !CONFIG_BLK_DEV_INITRD */ | 
|  |  | 
|  | static unsigned long __init init_initrd(void) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define finalize_initrd()	do {} while (0) | 
|  |  | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Initialize the bootmem allocator. It also setup initrd related data | 
|  | * if needed. | 
|  | */ | 
|  | #if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON64) && defined(CONFIG_NUMA)) | 
|  |  | 
|  | static void __init bootmem_init(void) | 
|  | { | 
|  | init_initrd(); | 
|  | finalize_initrd(); | 
|  | } | 
|  |  | 
|  | #else  /* !CONFIG_SGI_IP27 */ | 
|  |  | 
|  | static void __init bootmem_init(void) | 
|  | { | 
|  | phys_addr_t ramstart, ramend; | 
|  | unsigned long start, end; | 
|  | int i; | 
|  |  | 
|  | ramstart = memblock_start_of_DRAM(); | 
|  | ramend = memblock_end_of_DRAM(); | 
|  |  | 
|  | /* | 
|  | * Sanity check any INITRD first. We don't take it into account | 
|  | * for bootmem setup initially, rely on the end-of-kernel-code | 
|  | * as our memory range starting point. Once bootmem is inited we | 
|  | * will reserve the area used for the initrd. | 
|  | */ | 
|  | init_initrd(); | 
|  |  | 
|  | /* Reserve memory occupied by kernel. */ | 
|  | memblock_reserve(__pa_symbol(&_text), | 
|  | __pa_symbol(&_end) - __pa_symbol(&_text)); | 
|  |  | 
|  | /* max_low_pfn is not a number of pages but the end pfn of low mem */ | 
|  |  | 
|  | #ifdef CONFIG_MIPS_AUTO_PFN_OFFSET | 
|  | ARCH_PFN_OFFSET = PFN_UP(ramstart); | 
|  | #else | 
|  | /* | 
|  | * Reserve any memory between the start of RAM and PHYS_OFFSET | 
|  | */ | 
|  | if (ramstart > PHYS_OFFSET) | 
|  | memblock_reserve(PHYS_OFFSET, ramstart - PHYS_OFFSET); | 
|  |  | 
|  | if (PFN_UP(ramstart) > ARCH_PFN_OFFSET) { | 
|  | pr_info("Wasting %lu bytes for tracking %lu unused pages\n", | 
|  | (unsigned long)((PFN_UP(ramstart) - ARCH_PFN_OFFSET) * sizeof(struct page)), | 
|  | (unsigned long)(PFN_UP(ramstart) - ARCH_PFN_OFFSET)); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | min_low_pfn = ARCH_PFN_OFFSET; | 
|  | max_pfn = PFN_DOWN(ramend); | 
|  | for_each_mem_pfn_range(i, MAX_NUMNODES, &start, &end, NULL) { | 
|  | /* | 
|  | * Skip highmem here so we get an accurate max_low_pfn if low | 
|  | * memory stops short of high memory. | 
|  | * If the region overlaps HIGHMEM_START, end is clipped so | 
|  | * max_pfn excludes the highmem portion. | 
|  | */ | 
|  | if (start >= PFN_DOWN(HIGHMEM_START)) | 
|  | continue; | 
|  | if (end > PFN_DOWN(HIGHMEM_START)) | 
|  | end = PFN_DOWN(HIGHMEM_START); | 
|  | if (end > max_low_pfn) | 
|  | max_low_pfn = end; | 
|  | } | 
|  |  | 
|  | if (min_low_pfn >= max_low_pfn) | 
|  | panic("Incorrect memory mapping !!!"); | 
|  |  | 
|  | if (max_pfn > PFN_DOWN(HIGHMEM_START)) { | 
|  | max_low_pfn = PFN_DOWN(HIGHMEM_START); | 
|  | #ifdef CONFIG_HIGHMEM | 
|  | highstart_pfn = max_low_pfn; | 
|  | highend_pfn = max_pfn; | 
|  | #else | 
|  | max_pfn = max_low_pfn; | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reserve initrd memory if needed. | 
|  | */ | 
|  | finalize_initrd(); | 
|  | } | 
|  |  | 
|  | #endif	/* CONFIG_SGI_IP27 */ | 
|  |  | 
|  | static int usermem __initdata; | 
|  |  | 
|  | static int __init early_parse_mem(char *p) | 
|  | { | 
|  | phys_addr_t start, size; | 
|  |  | 
|  | if (!p) { | 
|  | pr_err("mem parameter is empty, do nothing\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If a user specifies memory size, we | 
|  | * blow away any automatically generated | 
|  | * size. | 
|  | */ | 
|  | if (usermem == 0) { | 
|  | usermem = 1; | 
|  | memblock_remove(memblock_start_of_DRAM(), | 
|  | memblock_end_of_DRAM() - memblock_start_of_DRAM()); | 
|  | } | 
|  | start = 0; | 
|  | size = memparse(p, &p); | 
|  | if (*p == '@') | 
|  | start = memparse(p + 1, &p); | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_NUMA)) | 
|  | memblock_add_node(start, size, pa_to_nid(start), MEMBLOCK_NONE); | 
|  | else | 
|  | memblock_add(start, size); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | early_param("mem", early_parse_mem); | 
|  |  | 
|  | static int __init early_parse_memmap(char *p) | 
|  | { | 
|  | char *oldp; | 
|  | u64 start_at, mem_size; | 
|  |  | 
|  | if (!p) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!strncmp(p, "exactmap", 8)) { | 
|  | pr_err("\"memmap=exactmap\" invalid on MIPS\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | oldp = p; | 
|  | mem_size = memparse(p, &p); | 
|  | if (p == oldp) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (*p == '@') { | 
|  | start_at = memparse(p+1, &p); | 
|  | memblock_add(start_at, mem_size); | 
|  | } else if (*p == '#') { | 
|  | pr_err("\"memmap=nn#ss\" (force ACPI data) invalid on MIPS\n"); | 
|  | return -EINVAL; | 
|  | } else if (*p == '$') { | 
|  | start_at = memparse(p+1, &p); | 
|  | memblock_add(start_at, mem_size); | 
|  | memblock_reserve(start_at, mem_size); | 
|  | } else { | 
|  | pr_err("\"memmap\" invalid format!\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (*p == '\0') { | 
|  | usermem = 1; | 
|  | return 0; | 
|  | } else | 
|  | return -EINVAL; | 
|  | } | 
|  | early_param("memmap", early_parse_memmap); | 
|  |  | 
|  | static void __init mips_reserve_vmcore(void) | 
|  | { | 
|  | #ifdef CONFIG_PROC_VMCORE | 
|  | phys_addr_t start, end; | 
|  | u64 i; | 
|  |  | 
|  | if (!elfcorehdr_size) { | 
|  | for_each_mem_range(i, &start, &end) { | 
|  | if (elfcorehdr_addr >= start && elfcorehdr_addr < end) { | 
|  | /* | 
|  | * Reserve from the elf core header to the end of | 
|  | * the memory segment, that should all be kdump | 
|  | * reserved memory. | 
|  | */ | 
|  | elfcorehdr_size = end - elfcorehdr_addr; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | pr_info("Reserving %ldKB of memory at %ldKB for kdump\n", | 
|  | (unsigned long)elfcorehdr_size >> 10, (unsigned long)elfcorehdr_addr >> 10); | 
|  |  | 
|  | memblock_reserve(elfcorehdr_addr, elfcorehdr_size); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* 64M alignment for crash kernel regions */ | 
|  | #define CRASH_ALIGN	SZ_64M | 
|  | #define CRASH_ADDR_MAX	SZ_512M | 
|  |  | 
|  | static void __init mips_parse_crashkernel(void) | 
|  | { | 
|  | unsigned long long total_mem; | 
|  | unsigned long long crash_size, crash_base; | 
|  | int ret; | 
|  |  | 
|  | if (!IS_ENABLED(CONFIG_CRASH_RESERVE)) | 
|  | return; | 
|  |  | 
|  | total_mem = memblock_phys_mem_size(); | 
|  | ret = parse_crashkernel(boot_command_line, total_mem, | 
|  | &crash_size, &crash_base, | 
|  | NULL, NULL, NULL); | 
|  | if (ret != 0 || crash_size <= 0) | 
|  | return; | 
|  |  | 
|  | if (crash_base <= 0) { | 
|  | crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN, | 
|  | CRASH_ALIGN, | 
|  | CRASH_ADDR_MAX); | 
|  | if (!crash_base) { | 
|  | pr_warn("crashkernel reservation failed - No suitable area found.\n"); | 
|  | return; | 
|  | } | 
|  | } else { | 
|  | unsigned long long start; | 
|  |  | 
|  | start = memblock_phys_alloc_range(crash_size, 1, | 
|  | crash_base, | 
|  | crash_base + crash_size); | 
|  | if (start != crash_base) { | 
|  | pr_warn("Invalid memory region reserved for crash kernel\n"); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | crashk_res.start = crash_base; | 
|  | crashk_res.end	 = crash_base + crash_size - 1; | 
|  | } | 
|  |  | 
|  | static void __init request_crashkernel(struct resource *res) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!IS_ENABLED(CONFIG_CRASH_RESERVE)) | 
|  | return; | 
|  |  | 
|  | if (crashk_res.start == crashk_res.end) | 
|  | return; | 
|  |  | 
|  | ret = request_resource(res, &crashk_res); | 
|  | if (!ret) | 
|  | pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n", | 
|  | (unsigned long)(resource_size(&crashk_res) >> 20), | 
|  | (unsigned long)(crashk_res.start  >> 20)); | 
|  | } | 
|  |  | 
|  | static void __init check_kernel_sections_mem(void) | 
|  | { | 
|  | phys_addr_t start = __pa_symbol(&_text); | 
|  | phys_addr_t size = __pa_symbol(&_end) - start; | 
|  |  | 
|  | if (!memblock_is_region_memory(start, size)) { | 
|  | pr_info("Kernel sections are not in the memory maps\n"); | 
|  | memblock_add(start, size); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void __init bootcmdline_append(const char *s, size_t max) | 
|  | { | 
|  | if (!s[0] || !max) | 
|  | return; | 
|  |  | 
|  | if (boot_command_line[0]) | 
|  | strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); | 
|  |  | 
|  | strlcat(boot_command_line, s, max); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_OF_EARLY_FLATTREE | 
|  |  | 
|  | static int __init bootcmdline_scan_chosen(unsigned long node, const char *uname, | 
|  | int depth, void *data) | 
|  | { | 
|  | bool *dt_bootargs = data; | 
|  | const char *p; | 
|  | int l; | 
|  |  | 
|  | if (depth != 1 || !data || | 
|  | (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) | 
|  | return 0; | 
|  |  | 
|  | p = of_get_flat_dt_prop(node, "bootargs", &l); | 
|  | if (p != NULL && l > 0) { | 
|  | bootcmdline_append(p, min(l, COMMAND_LINE_SIZE)); | 
|  | *dt_bootargs = true; | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_OF_EARLY_FLATTREE */ | 
|  |  | 
|  | static void __init bootcmdline_init(void) | 
|  | { | 
|  | bool dt_bootargs = false; | 
|  |  | 
|  | /* | 
|  | * If CMDLINE_OVERRIDE is enabled then initializing the command line is | 
|  | * trivial - we simply use the built-in command line unconditionally & | 
|  | * unmodified. | 
|  | */ | 
|  | if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) { | 
|  | strscpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the user specified a built-in command line & | 
|  | * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is | 
|  | * prepended to arguments from the bootloader or DT so we'll copy them | 
|  | * to the start of boot_command_line here. Otherwise, empty | 
|  | * boot_command_line to undo anything early_init_dt_scan_chosen() did. | 
|  | */ | 
|  | if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) | 
|  | strscpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); | 
|  | else | 
|  | boot_command_line[0] = 0; | 
|  |  | 
|  | #ifdef CONFIG_OF_EARLY_FLATTREE | 
|  | /* | 
|  | * If we're configured to take boot arguments from DT, look for those | 
|  | * now. | 
|  | */ | 
|  | if (IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB) || | 
|  | IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND)) | 
|  | of_scan_flat_dt(bootcmdline_scan_chosen, &dt_bootargs); | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * If we didn't get any arguments from DT (regardless of whether that's | 
|  | * because we weren't configured to look for them, or because we looked | 
|  | * & found none) then we'll take arguments from the bootloader. | 
|  | * plat_mem_setup() should have filled arcs_cmdline with arguments from | 
|  | * the bootloader. | 
|  | */ | 
|  | if (IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) || !dt_bootargs) | 
|  | bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE); | 
|  |  | 
|  | /* | 
|  | * If the user specified a built-in command line & we didn't already | 
|  | * prepend it, we append it to boot_command_line here. | 
|  | */ | 
|  | if (IS_ENABLED(CONFIG_CMDLINE_BOOL) && | 
|  | !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) | 
|  | bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * arch_mem_init - initialize memory management subsystem | 
|  | * | 
|  | *  o plat_mem_setup() detects the memory configuration and will record detected | 
|  | *    memory areas using memblock_add. | 
|  | * | 
|  | * At this stage the memory configuration of the system is known to the | 
|  | * kernel but generic memory management system is still entirely uninitialized. | 
|  | * | 
|  | *  o bootmem_init() | 
|  | *  o sparse_init() | 
|  | *  o paging_init() | 
|  | *  o dma_contiguous_reserve() | 
|  | * | 
|  | * At this stage the bootmem allocator is ready to use. | 
|  | * | 
|  | * NOTE: historically plat_mem_setup did the entire platform initialization. | 
|  | *	 This was rather impractical because it meant plat_mem_setup had to | 
|  | * get away without any kind of memory allocator.  To keep old code from | 
|  | * breaking plat_setup was just renamed to plat_mem_setup and a second platform | 
|  | * initialization hook for anything else was introduced. | 
|  | */ | 
|  | static void __init arch_mem_init(char **cmdline_p) | 
|  | { | 
|  | /* call board setup routine */ | 
|  | plat_mem_setup(); | 
|  | memblock_set_bottom_up(true); | 
|  |  | 
|  | bootcmdline_init(); | 
|  | strscpy(command_line, boot_command_line, COMMAND_LINE_SIZE); | 
|  | *cmdline_p = command_line; | 
|  |  | 
|  | parse_early_param(); | 
|  |  | 
|  | if (usermem) | 
|  | pr_info("User-defined physical RAM map overwrite\n"); | 
|  |  | 
|  | check_kernel_sections_mem(); | 
|  |  | 
|  | early_init_fdt_reserve_self(); | 
|  | early_init_fdt_scan_reserved_mem(); | 
|  |  | 
|  | #ifndef CONFIG_NUMA | 
|  | memblock_set_node(0, PHYS_ADDR_MAX, &memblock.memory, 0); | 
|  | #endif | 
|  | bootmem_init(); | 
|  |  | 
|  | /* | 
|  | * Prevent memblock from allocating high memory. | 
|  | * This cannot be done before max_low_pfn is detected, so up | 
|  | * to this point is possible to only reserve physical memory | 
|  | * with memblock_reserve; memblock_alloc* can be used | 
|  | * only after this point | 
|  | */ | 
|  | memblock_set_current_limit(PFN_PHYS(max_low_pfn)); | 
|  |  | 
|  | mips_reserve_vmcore(); | 
|  |  | 
|  | mips_parse_crashkernel(); | 
|  | device_tree_init(); | 
|  |  | 
|  | /* | 
|  | * In order to reduce the possibility of kernel panic when failed to | 
|  | * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate | 
|  | * low memory as small as possible before plat_swiotlb_setup(), so | 
|  | * make sparse_init() using top-down allocation. | 
|  | */ | 
|  | memblock_set_bottom_up(false); | 
|  | sparse_init(); | 
|  | memblock_set_bottom_up(true); | 
|  |  | 
|  | plat_swiotlb_setup(); | 
|  |  | 
|  | dma_contiguous_reserve(PFN_PHYS(max_low_pfn)); | 
|  |  | 
|  | /* Reserve for hibernation. */ | 
|  | memblock_reserve(__pa_symbol(&__nosave_begin), | 
|  | __pa_symbol(&__nosave_end) - __pa_symbol(&__nosave_begin)); | 
|  |  | 
|  | early_memtest(PFN_PHYS(ARCH_PFN_OFFSET), PFN_PHYS(max_low_pfn)); | 
|  | } | 
|  |  | 
|  | static void __init resource_init(void) | 
|  | { | 
|  | phys_addr_t start, end; | 
|  | u64 i; | 
|  |  | 
|  | if (UNCAC_BASE != IO_BASE) | 
|  | return; | 
|  |  | 
|  | code_resource.start = __pa_symbol(&_text); | 
|  | code_resource.end = __pa_symbol(&_etext) - 1; | 
|  | data_resource.start = __pa_symbol(&_etext); | 
|  | data_resource.end = __pa_symbol(&_edata) - 1; | 
|  | bss_resource.start = __pa_symbol(&__bss_start); | 
|  | bss_resource.end = __pa_symbol(&__bss_stop) - 1; | 
|  |  | 
|  | for_each_mem_range(i, &start, &end) { | 
|  | struct resource *res; | 
|  |  | 
|  | res = memblock_alloc_or_panic(sizeof(struct resource), SMP_CACHE_BYTES); | 
|  |  | 
|  | res->start = start; | 
|  | /* | 
|  | * In memblock, end points to the first byte after the | 
|  | * range while in resourses, end points to the last byte in | 
|  | * the range. | 
|  | */ | 
|  | res->end = end - 1; | 
|  | res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; | 
|  | res->name = "System RAM"; | 
|  |  | 
|  | request_resource(&iomem_resource, res); | 
|  |  | 
|  | /* | 
|  | *  We don't know which RAM region contains kernel data, | 
|  | *  so we try it repeatedly and let the resource manager | 
|  | *  test it. | 
|  | */ | 
|  | request_resource(res, &code_resource); | 
|  | request_resource(res, &data_resource); | 
|  | request_resource(res, &bss_resource); | 
|  | request_crashkernel(res); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_SMP | 
|  | static void __init prefill_possible_map(void) | 
|  | { | 
|  | int i, possible = num_possible_cpus(); | 
|  |  | 
|  | if (possible > nr_cpu_ids) | 
|  | possible = nr_cpu_ids; | 
|  |  | 
|  | for (i = 0; i < possible; i++) | 
|  | set_cpu_possible(i, true); | 
|  | for (; i < NR_CPUS; i++) | 
|  | set_cpu_possible(i, false); | 
|  |  | 
|  | set_nr_cpu_ids(possible); | 
|  | } | 
|  | #else | 
|  | static inline void prefill_possible_map(void) {} | 
|  | #endif | 
|  |  | 
|  | static void __init setup_rng_seed(void) | 
|  | { | 
|  | char *rng_seed_hex = fw_getenv("rngseed"); | 
|  | u8 rng_seed[512]; | 
|  | size_t len; | 
|  |  | 
|  | if (!rng_seed_hex) | 
|  | return; | 
|  |  | 
|  | len = min(sizeof(rng_seed), strlen(rng_seed_hex) / 2); | 
|  | if (hex2bin(rng_seed, rng_seed_hex, len)) | 
|  | return; | 
|  |  | 
|  | add_bootloader_randomness(rng_seed, len); | 
|  | memzero_explicit(rng_seed, len); | 
|  | memzero_explicit(rng_seed_hex, len * 2); | 
|  | } | 
|  |  | 
|  | void __init setup_arch(char **cmdline_p) | 
|  | { | 
|  | cpu_probe(); | 
|  | mips_cm_probe(); | 
|  | prom_init(); | 
|  |  | 
|  | setup_early_fdc_console(); | 
|  | #ifdef CONFIG_EARLY_PRINTK | 
|  | setup_early_printk(); | 
|  | #endif | 
|  | cpu_report(); | 
|  | if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64)) | 
|  | check_bugs64_early(); | 
|  |  | 
|  | arch_mem_init(cmdline_p); | 
|  | dmi_setup(); | 
|  |  | 
|  | resource_init(); | 
|  | plat_smp_setup(); | 
|  | prefill_possible_map(); | 
|  |  | 
|  | cpu_cache_init(); | 
|  | paging_init(); | 
|  |  | 
|  | memblock_dump_all(); | 
|  |  | 
|  | setup_rng_seed(); | 
|  | } | 
|  |  | 
|  | unsigned long kernelsp[NR_CPUS]; | 
|  | unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3; | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  | struct dentry *mips_debugfs_dir; | 
|  | static int __init debugfs_mips(void) | 
|  | { | 
|  | mips_debugfs_dir = debugfs_create_dir("mips", NULL); | 
|  | return 0; | 
|  | } | 
|  | arch_initcall(debugfs_mips); | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_DMA_NONCOHERENT | 
|  | static int __init setcoherentio(char *str) | 
|  | { | 
|  | dma_default_coherent = true; | 
|  | pr_info("Hardware DMA cache coherency (command line)\n"); | 
|  | return 0; | 
|  | } | 
|  | early_param("coherentio", setcoherentio); | 
|  |  | 
|  | static int __init setnocoherentio(char *str) | 
|  | { | 
|  | dma_default_coherent = false; | 
|  | pr_info("Software DMA cache coherency (command line)\n"); | 
|  | return 0; | 
|  | } | 
|  | early_param("nocoherentio", setnocoherentio); | 
|  | #endif | 
|  |  | 
|  | void __init arch_cpu_finalize_init(void) | 
|  | { | 
|  | unsigned int cpu = smp_processor_id(); | 
|  |  | 
|  | cpu_data[cpu].udelay_val = loops_per_jiffy; | 
|  | check_bugs32(); | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64)) | 
|  | check_bugs64(); | 
|  | } |