Documentation/livepatch/module-elf-format.rst - pub/scm/linux/kernel/git/gregkh/tty - Git at Google

 ===========================
 Livepatch module ELF format
 ===========================

 This document outlines the ELF format requirements that livepatch modules must follow.


 .. Table of Contents

 .. contents:: :local:


 1. Background and motivation
 ============================

 Formerly, livepatch required separate architecture-specific code to write
 relocations. However, arch-specific code to write relocations already
 exists in the module loader, so this former approach produced redundant
 code. So, instead of duplicating code and re-implementing what the module
 loader can already do, livepatch leverages existing code in the module
 loader to perform the all the arch-specific relocation work. Specifically,
 livepatch reuses the apply_relocate_add() function in the module loader to
 write relocations. The patch module ELF format described in this document
 enables livepatch to be able to do this. The hope is that this will make
 livepatch more easily portable to other architectures and reduce the amount
 of arch-specific code required to port livepatch to a particular
 architecture.

 Since apply_relocate_add() requires access to a module's section header
 table, symbol table, and relocation section indices, ELF information is
 preserved for livepatch modules (see section 5). Livepatch manages its own
 relocation sections and symbols, which are described in this document. The
 ELF constants used to mark livepatch symbols and relocation sections were
 selected from OS-specific ranges according to the definitions from glibc.

 Why does livepatch need to write its own relocations?
 -----------------------------------------------------
 A typical livepatch module contains patched versions of functions that can
 reference non-exported global symbols and non-included local symbols.
 Relocations referencing these types of symbols cannot be left in as-is
 since the kernel module loader cannot resolve them and will therefore
 reject the livepatch module. Furthermore, we cannot apply relocations that
 affect modules not yet loaded at patch module load time (e.g. a patch to a
 driver that is not loaded). Formerly, livepatch solved this problem by
 embedding special "dynrela" (dynamic rela) sections in the resulting patch
 module ELF output. Using these dynrela sections, livepatch could resolve
 symbols while taking into account its scope and what module the symbol
 belongs to, and then manually apply the dynamic relocations. However this
 approach required livepatch to supply arch-specific code in order to write
 these relocations. In the new format, livepatch manages its own SHT_RELA
 relocation sections in place of dynrela sections, and the symbols that the
 relas reference are special livepatch symbols (see section 2 and 3). The
 arch-specific livepatch relocation code is replaced by a call to
 apply_relocate_add().

 2. Livepatch modinfo field
 ==========================

 Livepatch modules are required to have the "livepatch" modinfo attribute.
 See the sample livepatch module in samples/livepatch/ for how this is done.

 Livepatch modules can be identified by users by using the 'modinfo' command
 and looking for the presence of the "livepatch" field. This field is also
 used by the kernel module loader to identify livepatch modules.

 Example:
 --------

 **Modinfo output:**

 ::

 	% modinfo livepatch-meminfo.ko
 	filename:		livepatch-meminfo.ko
 	livepatch:		Y
 	license:		GPL
 	depends:
 	vermagic:		4.3.0+ SMP mod_unload

 3. Livepatch relocation sections
 ================================

 A livepatch module manages its own ELF relocation sections to apply
 relocations to modules as well as to the kernel (vmlinux) at the
 appropriate time. For example, if a patch module patches a driver that is
 not currently loaded, livepatch will apply the corresponding livepatch
 relocation section(s) to the driver once it loads.

 Each "object" (e.g. vmlinux, or a module) within a patch module may have
 multiple livepatch relocation sections associated with it (e.g. patches to
 multiple functions within the same object). There is a 1-1 correspondence
 between a livepatch relocation section and the target section (usually the
 text section of a function) to which the relocation(s) apply. It is
 also possible for a livepatch module to have no livepatch relocation
 sections, as in the case of the sample livepatch module (see
 samples/livepatch).

 Since ELF information is preserved for livepatch modules (see Section 5), a
 livepatch relocation section can be applied simply by passing in the
 appropriate section index to apply_relocate_add(), which then uses it to
 access the relocation section and apply the relocations.

 Every symbol referenced by a rela in a livepatch relocation section is a
 livepatch symbol. These must be resolved before livepatch can call
 apply_relocate_add(). See Section 3 for more information.

 3.1 Livepatch relocation section format
 =======================================

 Livepatch relocation sections must be marked with the SHF_RELA_LIVEPATCH
 section flag. See include/uapi/linux/elf.h for the definition. The module
 loader recognizes this flag and will avoid applying those relocation sections
 at patch module load time. These sections must also be marked with SHF_ALLOC,
 so that the module loader doesn't discard them on module load (i.e. they will
 be copied into memory along with the other SHF_ALLOC sections).

 The name of a livepatch relocation section must conform to the following
 format::

   .klp.rela.objname.section_name
   ^        ^^     ^ ^          ^
   |________||_____| |__________|
      [A]      [B]        [C]

 [A]
   The relocation section name is prefixed with the string ".klp.rela."

 [B]
   The name of the object (i.e. "vmlinux" or name of module) to
   which the relocation section belongs follows immediately after the prefix.

 [C]
   The actual name of the section to which this relocation section applies.

 Examples:
 ---------

 **Livepatch relocation section names:**

 ::

   .klp.rela.ext4.text.ext4_attr_store
   .klp.rela.vmlinux.text.cmdline_proc_show

 **`readelf --sections` output for a patch
 module that patches vmlinux and modules 9p, btrfs, ext4:**

 ::

   Section Headers:
   [Nr] Name                          Type                    Address          Off    Size   ES Flg Lk Inf Al
   [ snip ]
   [29] .klp.rela.9p.text.caches.show RELA                    0000000000000000 002d58 0000c0 18 AIo 64   9  8
   [30] .klp.rela.btrfs.text.btrfs.feature.attr.show RELA     0000000000000000 002e18 000060 18 AIo 64  11  8
   [ snip ]
   [34] .klp.rela.ext4.text.ext4.attr.store RELA              0000000000000000 002fd8 0000d8 18 AIo 64  13  8
   [35] .klp.rela.ext4.text.ext4.attr.show RELA               0000000000000000 0030b0 000150 18 AIo 64  15  8
   [36] .klp.rela.vmlinux.text.cmdline.proc.show RELA         0000000000000000 003200 000018 18 AIo 64  17  8
   [37] .klp.rela.vmlinux.text.meminfo.proc.show RELA         0000000000000000 003218 0000f0 18 AIo 64  19  8
   [ snip ]                                       ^                                             ^
                                                  |                                             |
                                                 [*]                                           [*]

 [*]
   Livepatch relocation sections are SHT_RELA sections but with a few special
   characteristics. Notice that they are marked SHF_ALLOC ("A") so that they will
   not be discarded when the module is loaded into memory, as well as with the
   SHF_RELA_LIVEPATCH flag ("o" - for OS-specific).

 **`readelf --relocs` output for a patch module:**

 ::

   Relocation section '.klp.rela.btrfs.text.btrfs_feature_attr_show' at offset 0x2ba0 contains 4 entries:
       Offset             Info             Type               Symbol's Value  Symbol's Name + Addend
   000000000000001f  0000005e00000002 R_X86_64_PC32          0000000000000000 .klp.sym.vmlinux.printk,0 - 4
   0000000000000028  0000003d0000000b R_X86_64_32S           0000000000000000 .klp.sym.btrfs.btrfs_ktype,0 + 0
   0000000000000036  0000003b00000002 R_X86_64_PC32          0000000000000000 .klp.sym.btrfs.can_modify_feature.isra.3,0 - 4
   000000000000004c  0000004900000002 R_X86_64_PC32          0000000000000000 .klp.sym.vmlinux.snprintf,0 - 4
   [ snip ]                                                                   ^
                                                                              |
                                                                             [*]

 [*]
   Every symbol referenced by a relocation is a livepatch symbol.

 4. Livepatch symbols
 ====================

 Livepatch symbols are symbols referred to by livepatch relocation sections.
 These are symbols accessed from new versions of functions for patched
 objects, whose addresses cannot be resolved by the module loader (because
 they are local or unexported global syms). Since the module loader only
 resolves exported syms, and not every symbol referenced by the new patched
 functions is exported, livepatch symbols were introduced. They are used
 also in cases where we cannot immediately know the address of a symbol when
 a patch module loads. For example, this is the case when livepatch patches
 a module that is not loaded yet. In this case, the relevant livepatch
 symbols are resolved simply when the target module loads. In any case, for
 any livepatch relocation section, all livepatch symbols referenced by that
 section must be resolved before livepatch can call apply_relocate_add() for
 that reloc section.

 Livepatch symbols must be marked with SHN_LIVEPATCH so that the module
 loader can identify and ignore them. Livepatch modules keep these symbols
 in their symbol tables, and the symbol table is made accessible through
 module->symtab.

 4.1 A livepatch module's symbol table
 =====================================
 Normally, a stripped down copy of a module's symbol table (containing only
 "core" symbols) is made available through module->symtab (See layout_symtab()
 in kernel/module/kallsyms.c). For livepatch modules, the symbol table copied
 into memory on module load must be exactly the same as the symbol table produced
 when the patch module was compiled. This is because the relocations in each
 livepatch relocation section refer to their respective symbols with their symbol
 indices, and the original symbol indices (and thus the symtab ordering) must be
 preserved in order for apply_relocate_add() to find the right symbol.

 For example, take this particular rela from a livepatch module::

   Relocation section '.klp.rela.btrfs.text.btrfs_feature_attr_show' at offset 0x2ba0 contains 4 entries:
       Offset             Info             Type               Symbol's Value  Symbol's Name + Addend
   000000000000001f  0000005e00000002 R_X86_64_PC32          0000000000000000 .klp.sym.vmlinux.printk,0 - 4

 This rela refers to the symbol '.klp.sym.vmlinux.printk,0', and the symbol
 index is encoded in 'Info'. Here its symbol index is 0x5e, which is 94 in
 decimal, which refers to the symbol index 94.

 And in this patch module's corresponding symbol table, symbol index 94 refers
 to that very symbol::

   [ snip ]
   94: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.printk,0
   [ snip ]

 4.2 Livepatch symbol format
 ===========================

 Livepatch symbols must have their section index marked as SHN_LIVEPATCH, so
 that the module loader can identify them and not attempt to resolve them.
 See include/uapi/linux/elf.h for the actual definitions.

 Livepatch symbol names must conform to the following format::

   .klp.sym.objname.symbol_name,sympos
   ^       ^^     ^ ^         ^ ^
   |_______||_____| |_________| |
      [A]     [B]       [C]    [D]

 [A]
   The symbol name is prefixed with the string ".klp.sym."

 [B]
   The name of the object (i.e. "vmlinux" or name of module) to
   which the symbol belongs follows immediately after the prefix.

 [C]
   The actual name of the symbol.

 [D]
   The position of the symbol in the object (as according to kallsyms)
   This is used to differentiate duplicate symbols within the same
   object. The symbol position is expressed numerically (0, 1, 2...).
   The symbol position of a unique symbol is 0.

 Examples:
 ---------

 **Livepatch symbol names:**

 ::

 	.klp.sym.vmlinux.snprintf,0
 	.klp.sym.vmlinux.printk,0
 	.klp.sym.btrfs.btrfs_ktype,0

 **`readelf --symbols` output for a patch module:**

 ::

   Symbol table '.symtab' contains 127 entries:
      Num:    Value          Size Type    Bind   Vis     Ndx         Name
      [ snip ]
       73: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.snprintf,0
       74: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.capable,0
       75: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.find_next_bit,0
       76: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.si_swapinfo,0
     [ snip ]                                               ^
                                                            |
                                                           [*]

 [*]
   Note that the 'Ndx' (Section index) for these symbols is SHN_LIVEPATCH (0xff20).
   "OS" means OS-specific.

 5. Symbol table and ELF section access
 ======================================
 A livepatch module's symbol table is accessible through module->symtab.

 Since apply_relocate_add() requires access to a module's section headers,
 symbol table, and relocation section indices, ELF information is preserved for
 livepatch modules and is made accessible by the module loader through
 module->klp_info, which is a :c:type:`klp_modinfo` struct. When a livepatch module
 loads, this struct is filled in by the module loader.
	===========================
	Livepatch module ELF format
	===========================

	This document outlines the ELF format requirements that livepatch modules must follow.


	.. Table of Contents

	.. contents:: :local:


	1. Background and motivation
	============================

	Formerly, livepatch required separate architecture-specific code to write
	relocations. However, arch-specific code to write relocations already
	exists in the module loader, so this former approach produced redundant
	code. So, instead of duplicating code and re-implementing what the module
	loader can already do, livepatch leverages existing code in the module
	loader to perform the all the arch-specific relocation work. Specifically,
	livepatch reuses the apply_relocate_add() function in the module loader to
	write relocations. The patch module ELF format described in this document
	enables livepatch to be able to do this. The hope is that this will make
	livepatch more easily portable to other architectures and reduce the amount
	of arch-specific code required to port livepatch to a particular
	architecture.

	Since apply_relocate_add() requires access to a module's section header
	table, symbol table, and relocation section indices, ELF information is
	preserved for livepatch modules (see section 5). Livepatch manages its own
	relocation sections and symbols, which are described in this document. The
	ELF constants used to mark livepatch symbols and relocation sections were
	selected from OS-specific ranges according to the definitions from glibc.

	Why does livepatch need to write its own relocations?
	-----------------------------------------------------
	A typical livepatch module contains patched versions of functions that can
	reference non-exported global symbols and non-included local symbols.
	Relocations referencing these types of symbols cannot be left in as-is
	since the kernel module loader cannot resolve them and will therefore
	reject the livepatch module. Furthermore, we cannot apply relocations that
	affect modules not yet loaded at patch module load time (e.g. a patch to a
	driver that is not loaded). Formerly, livepatch solved this problem by
	embedding special "dynrela" (dynamic rela) sections in the resulting patch
	module ELF output. Using these dynrela sections, livepatch could resolve
	symbols while taking into account its scope and what module the symbol
	belongs to, and then manually apply the dynamic relocations. However this
	approach required livepatch to supply arch-specific code in order to write
	these relocations. In the new format, livepatch manages its own SHT_RELA
	relocation sections in place of dynrela sections, and the symbols that the
	relas reference are special livepatch symbols (see section 2 and 3). The
	arch-specific livepatch relocation code is replaced by a call to
	apply_relocate_add().

	2. Livepatch modinfo field
	==========================

	Livepatch modules are required to have the "livepatch" modinfo attribute.
	See the sample livepatch module in samples/livepatch/ for how this is done.

	Livepatch modules can be identified by users by using the 'modinfo' command
	and looking for the presence of the "livepatch" field. This field is also
	used by the kernel module loader to identify livepatch modules.

	Example:
	--------

	Modinfo output:

	::

	% modinfo livepatch-meminfo.ko
	filename: livepatch-meminfo.ko
	livepatch: Y
	license: GPL
	depends:
	vermagic: 4.3.0+ SMP mod_unload

	3. Livepatch relocation sections
	================================

	A livepatch module manages its own ELF relocation sections to apply
	relocations to modules as well as to the kernel (vmlinux) at the
	appropriate time. For example, if a patch module patches a driver that is
	not currently loaded, livepatch will apply the corresponding livepatch
	relocation section(s) to the driver once it loads.

	Each "object" (e.g. vmlinux, or a module) within a patch module may have
	multiple livepatch relocation sections associated with it (e.g. patches to
	multiple functions within the same object). There is a 1-1 correspondence
	between a livepatch relocation section and the target section (usually the
	text section of a function) to which the relocation(s) apply. It is
	also possible for a livepatch module to have no livepatch relocation
	sections, as in the case of the sample livepatch module (see
	samples/livepatch).

	Since ELF information is preserved for livepatch modules (see Section 5), a
	livepatch relocation section can be applied simply by passing in the
	appropriate section index to apply_relocate_add(), which then uses it to
	access the relocation section and apply the relocations.

	Every symbol referenced by a rela in a livepatch relocation section is a
	livepatch symbol. These must be resolved before livepatch can call
	apply_relocate_add(). See Section 3 for more information.

	3.1 Livepatch relocation section format
	=======================================

	Livepatch relocation sections must be marked with the SHF_RELA_LIVEPATCH
	section flag. See include/uapi/linux/elf.h for the definition. The module
	loader recognizes this flag and will avoid applying those relocation sections
	at patch module load time. These sections must also be marked with SHF_ALLOC,
	so that the module loader doesn't discard them on module load (i.e. they will
	be copied into memory along with the other SHF_ALLOC sections).

	The name of a livepatch relocation section must conform to the following
	format::

	.klp.rela.objname.section_name
	^ ^^ ^ ^ ^
	\|________\|\|_____\| \|__________\|
	[A] [B] [C]

	[A]
	The relocation section name is prefixed with the string ".klp.rela."

	[B]
	The name of the object (i.e. "vmlinux" or name of module) to
	which the relocation section belongs follows immediately after the prefix.

	[C]
	The actual name of the section to which this relocation section applies.

	Examples:
	---------

	Livepatch relocation section names:

	::

	.klp.rela.ext4.text.ext4_attr_store
	.klp.rela.vmlinux.text.cmdline_proc_show

	**`readelf --sections` output for a patch
	module that patches vmlinux and modules 9p, btrfs, ext4:**

	::

	Section Headers:
	[Nr] Name Type Address Off Size ES Flg Lk Inf Al
	[ snip ]
	[29] .klp.rela.9p.text.caches.show RELA 0000000000000000 002d58 0000c0 18 AIo 64 9 8
	[30] .klp.rela.btrfs.text.btrfs.feature.attr.show RELA 0000000000000000 002e18 000060 18 AIo 64 11 8
	[ snip ]
	[34] .klp.rela.ext4.text.ext4.attr.store RELA 0000000000000000 002fd8 0000d8 18 AIo 64 13 8
	[35] .klp.rela.ext4.text.ext4.attr.show RELA 0000000000000000 0030b0 000150 18 AIo 64 15 8
	[36] .klp.rela.vmlinux.text.cmdline.proc.show RELA 0000000000000000 003200 000018 18 AIo 64 17 8
	[37] .klp.rela.vmlinux.text.meminfo.proc.show RELA 0000000000000000 003218 0000f0 18 AIo 64 19 8
	[ snip ] ^ ^
	\| \|
	[] []

	[*]
	Livepatch relocation sections are SHT_RELA sections but with a few special
	characteristics. Notice that they are marked SHF_ALLOC ("A") so that they will
	not be discarded when the module is loaded into memory, as well as with the
	SHF_RELA_LIVEPATCH flag ("o" - for OS-specific).

	`readelf --relocs` output for a patch module:

	::

	Relocation section '.klp.rela.btrfs.text.btrfs_feature_attr_show' at offset 0x2ba0 contains 4 entries:
	Offset Info Type Symbol's Value Symbol's Name + Addend
	000000000000001f 0000005e00000002 R_X86_64_PC32 0000000000000000 .klp.sym.vmlinux.printk,0 - 4
	0000000000000028 0000003d0000000b R_X86_64_32S 0000000000000000 .klp.sym.btrfs.btrfs_ktype,0 + 0
	0000000000000036 0000003b00000002 R_X86_64_PC32 0000000000000000 .klp.sym.btrfs.can_modify_feature.isra.3,0 - 4
	000000000000004c 0000004900000002 R_X86_64_PC32 0000000000000000 .klp.sym.vmlinux.snprintf,0 - 4
	[ snip ] ^
	\|
	[*]

	[*]
	Every symbol referenced by a relocation is a livepatch symbol.

	4. Livepatch symbols
	====================

	Livepatch symbols are symbols referred to by livepatch relocation sections.
	These are symbols accessed from new versions of functions for patched
	objects, whose addresses cannot be resolved by the module loader (because
	they are local or unexported global syms). Since the module loader only
	resolves exported syms, and not every symbol referenced by the new patched
	functions is exported, livepatch symbols were introduced. They are used
	also in cases where we cannot immediately know the address of a symbol when
	a patch module loads. For example, this is the case when livepatch patches
	a module that is not loaded yet. In this case, the relevant livepatch
	symbols are resolved simply when the target module loads. In any case, for
	any livepatch relocation section, all livepatch symbols referenced by that
	section must be resolved before livepatch can call apply_relocate_add() for
	that reloc section.

	Livepatch symbols must be marked with SHN_LIVEPATCH so that the module
	loader can identify and ignore them. Livepatch modules keep these symbols
	in their symbol tables, and the symbol table is made accessible through
	module->symtab.

	4.1 A livepatch module's symbol table
	=====================================
	Normally, a stripped down copy of a module's symbol table (containing only
	"core" symbols) is made available through module->symtab (See layout_symtab()
	in kernel/module/kallsyms.c). For livepatch modules, the symbol table copied
	into memory on module load must be exactly the same as the symbol table produced
	when the patch module was compiled. This is because the relocations in each
	livepatch relocation section refer to their respective symbols with their symbol
	indices, and the original symbol indices (and thus the symtab ordering) must be
	preserved in order for apply_relocate_add() to find the right symbol.

	For example, take this particular rela from a livepatch module::

	Relocation section '.klp.rela.btrfs.text.btrfs_feature_attr_show' at offset 0x2ba0 contains 4 entries:
	Offset Info Type Symbol's Value Symbol's Name + Addend
	000000000000001f 0000005e00000002 R_X86_64_PC32 0000000000000000 .klp.sym.vmlinux.printk,0 - 4

	This rela refers to the symbol '.klp.sym.vmlinux.printk,0', and the symbol
	index is encoded in 'Info'. Here its symbol index is 0x5e, which is 94 in
	decimal, which refers to the symbol index 94.

	And in this patch module's corresponding symbol table, symbol index 94 refers
	to that very symbol::

	[ snip ]
	94: 0000000000000000 0 NOTYPE GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.printk,0
	[ snip ]

	4.2 Livepatch symbol format
	===========================

	Livepatch symbols must have their section index marked as SHN_LIVEPATCH, so
	that the module loader can identify them and not attempt to resolve them.
	See include/uapi/linux/elf.h for the actual definitions.

	Livepatch symbol names must conform to the following format::

	.klp.sym.objname.symbol_name,sympos
	^ ^^ ^ ^ ^ ^
	\|_______\|\|_____\| \|_________\| \|
	[A] [B] [C] [D]

	[A]
	The symbol name is prefixed with the string ".klp.sym."

	[B]
	The name of the object (i.e. "vmlinux" or name of module) to
	which the symbol belongs follows immediately after the prefix.

	[C]
	The actual name of the symbol.

	[D]
	The position of the symbol in the object (as according to kallsyms)
	This is used to differentiate duplicate symbols within the same
	object. The symbol position is expressed numerically (0, 1, 2...).
	The symbol position of a unique symbol is 0.

	Examples:
	---------

	Livepatch symbol names:

	::

	.klp.sym.vmlinux.snprintf,0
	.klp.sym.vmlinux.printk,0
	.klp.sym.btrfs.btrfs_ktype,0

	`readelf --symbols` output for a patch module:

	::

	Symbol table '.symtab' contains 127 entries:
	Num: Value Size Type Bind Vis Ndx Name
	[ snip ]
	73: 0000000000000000 0 NOTYPE GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.snprintf,0
	74: 0000000000000000 0 NOTYPE GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.capable,0
	75: 0000000000000000 0 NOTYPE GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.find_next_bit,0
	76: 0000000000000000 0 NOTYPE GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.si_swapinfo,0
	[ snip ] ^
	\|
	[*]

	[*]
	Note that the 'Ndx' (Section index) for these symbols is SHN_LIVEPATCH (0xff20).
	"OS" means OS-specific.

	5. Symbol table and ELF section access
	======================================
	A livepatch module's symbol table is accessible through module->symtab.

	Since apply_relocate_add() requires access to a module's section headers,
	symbol table, and relocation section indices, ELF information is preserved for
	livepatch modules and is made accessible by the module loader through
	module->klp_info, which is a :c:type:`klp_modinfo` struct. When a livepatch module
	loads, this struct is filled in by the module loader.