| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * omap-ocp2scp.c - transform ocp interface protocol to scp protocol | 
 |  * | 
 |  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com | 
 |  * Author: Kishon Vijay Abraham I <kishon@ti.com> | 
 |  */ | 
 |  | 
 | #include <linux/io.h> | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/err.h> | 
 | #include <linux/pm_runtime.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_platform.h> | 
 |  | 
 | #define OCP2SCP_TIMING 0x18 | 
 | #define SYNC2_MASK 0xf | 
 |  | 
 | static int ocp2scp_remove_devices(struct device *dev, void *c) | 
 | { | 
 | 	struct platform_device *pdev = to_platform_device(dev); | 
 |  | 
 | 	platform_device_unregister(pdev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int omap_ocp2scp_probe(struct platform_device *pdev) | 
 | { | 
 | 	int ret; | 
 | 	u32 reg; | 
 | 	void __iomem *regs; | 
 | 	struct resource *res; | 
 | 	struct device_node *np = pdev->dev.of_node; | 
 |  | 
 | 	if (np) { | 
 | 		ret = of_platform_populate(np, NULL, NULL, &pdev->dev); | 
 | 		if (ret) { | 
 | 			dev_err(&pdev->dev, | 
 | 			    "failed to add resources for ocp2scp child\n"); | 
 | 			goto err0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	pm_runtime_enable(&pdev->dev); | 
 | 	/* | 
 | 	 * As per AM572x TRM: http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf | 
 | 	 * under section 26.3.2.2, table 26-26 OCP2SCP TIMING Caution; | 
 | 	 * As per OMAP4430 TRM: http://www.ti.com/lit/ug/swpu231ap/swpu231ap.pdf | 
 | 	 * under section 23.12.6.2.2 , Table 23-1213 OCP2SCP TIMING Caution; | 
 | 	 * As per OMAP4460 TRM: http://www.ti.com/lit/ug/swpu235ab/swpu235ab.pdf | 
 | 	 * under section 23.12.6.2.2, Table 23-1213 OCP2SCP TIMING Caution; | 
 | 	 * As per OMAP543x TRM http://www.ti.com/lit/pdf/swpu249 | 
 | 	 * under section 27.3.2.2, Table 27-27 OCP2SCP TIMING Caution; | 
 | 	 * | 
 | 	 * Read path of OCP2SCP is not working properly due to low reset value | 
 | 	 * of SYNC2 parameter in OCP2SCP. Suggested reset value is 0x6 or more. | 
 | 	 */ | 
 | 	if (!of_device_is_compatible(np, "ti,am437x-ocp2scp")) { | 
 | 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 		regs = devm_ioremap_resource(&pdev->dev, res); | 
 | 		if (IS_ERR(regs)) { | 
 | 			ret = PTR_ERR(regs); | 
 | 			goto err1; | 
 | 		} | 
 |  | 
 | 		pm_runtime_get_sync(&pdev->dev); | 
 | 		reg = readl_relaxed(regs + OCP2SCP_TIMING); | 
 | 		reg &= ~(SYNC2_MASK); | 
 | 		reg |= 0x6; | 
 | 		writel_relaxed(reg, regs + OCP2SCP_TIMING); | 
 | 		pm_runtime_put_sync(&pdev->dev); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err1: | 
 | 	pm_runtime_disable(&pdev->dev); | 
 |  | 
 | err0: | 
 | 	device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void omap_ocp2scp_remove(struct platform_device *pdev) | 
 | { | 
 | 	pm_runtime_disable(&pdev->dev); | 
 | 	device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices); | 
 | } | 
 |  | 
 | #ifdef CONFIG_OF | 
 | static const struct of_device_id omap_ocp2scp_id_table[] = { | 
 | 	{ .compatible = "ti,omap-ocp2scp" }, | 
 | 	{ .compatible = "ti,am437x-ocp2scp" }, | 
 | 	{} | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, omap_ocp2scp_id_table); | 
 | #endif | 
 |  | 
 | static struct platform_driver omap_ocp2scp_driver = { | 
 | 	.probe		= omap_ocp2scp_probe, | 
 | 	.remove		= omap_ocp2scp_remove, | 
 | 	.driver		= { | 
 | 		.name	= "omap-ocp2scp", | 
 | 		.of_match_table = of_match_ptr(omap_ocp2scp_id_table), | 
 | 	}, | 
 | }; | 
 |  | 
 | module_platform_driver(omap_ocp2scp_driver); | 
 |  | 
 | MODULE_ALIAS("platform:omap-ocp2scp"); | 
 | MODULE_AUTHOR("Texas Instruments Inc."); | 
 | MODULE_DESCRIPTION("OMAP OCP2SCP driver"); | 
 | MODULE_LICENSE("GPL v2"); |