| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Amiga CS Warp PATA controller driver | |
| * | |
| * Copyright (c) 2024 CS-Lab s.c. | |
| * http://www.cs-lab.eu | |
| * | |
| * Based on pata_gayle.c, pata_buddha.c and warpATA.device: | |
| * | |
| * Created 2 Jun 2024 by Andrzej Rogozynski | |
| */ | |
| #include <linux/ata.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/delay.h> | |
| #include <linux/device-id/zorro.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/libata.h> | |
| #include <linux/mm.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/zorro.h> | |
| #include <scsi/scsi_cmnd.h> | |
| #include <scsi/scsi_host.h> | |
| #include <asm/amigahw.h> | |
| #include <asm/amigaints.h> | |
| #include <asm/amigayle.h> | |
| #include <asm/setup.h> | |
| #define DRV_NAME "pata_cswarp" | |
| #define WARP_OFFSET_ATA 0x6000 | |
| static const struct scsi_host_template pata_cswarp_sht = { | |
| ATA_PIO_SHT(DRV_NAME), | |
| }; | |
| static unsigned int pata_cswarp_data_xfer(struct ata_queued_cmd *qc, | |
| unsigned char *buf, | |
| unsigned int buflen, int rw) | |
| { | |
| struct ata_device *dev = qc->dev; | |
| struct ata_port *ap = dev->link->ap; | |
| void __iomem *data_addr = ap->ioaddr.data_addr; | |
| unsigned int words = buflen >> 1; | |
| u16 *buf16 = (u16 *)buf; | |
| /* Transfer multiple of 2 bytes */ | |
| if (rw == READ) | |
| raw_insw(data_addr, buf16, words); | |
| else | |
| raw_outsw(data_addr, buf16, words); | |
| /* Transfer trailing byte, if any. */ | |
| if (unlikely(buflen & 0x01)) { | |
| if (rw == READ) | |
| buf[buflen - 1] = raw_inw(data_addr) >> 8; | |
| else | |
| raw_outw(buf[buflen - 1] << 8, data_addr); | |
| words++; | |
| } | |
| return words << 1; | |
| } | |
| /* | |
| * Provide our own set_mode() as we don't want to change anything that has | |
| * already been configured.. | |
| */ | |
| static int pata_cswarp_set_mode(struct ata_link *link, | |
| struct ata_device **unused) | |
| { | |
| struct ata_device *dev; | |
| ata_for_each_dev(dev, link, ENABLED) { | |
| /* We don't really care */ | |
| dev->pio_mode = dev->xfer_mode = XFER_PIO_0; | |
| dev->xfer_shift = ATA_SHIFT_PIO; | |
| dev->flags |= ATA_DFLAG_PIO; | |
| ata_dev_info(dev, "configured for PIO\n"); | |
| } | |
| return 0; | |
| } | |
| static struct ata_port_operations pata_cswarp_ops = { | |
| .inherits = &ata_sff_port_ops, | |
| .sff_data_xfer = pata_cswarp_data_xfer, | |
| .cable_detect = ata_cable_unknown, | |
| .set_mode = pata_cswarp_set_mode, | |
| }; | |
| static int pata_cswarp_probe(struct zorro_dev *z, | |
| const struct zorro_device_id *ent) | |
| { | |
| static const char board_name[] = "csWarp"; | |
| struct ata_host *host; | |
| struct ata_port *ap; | |
| struct resource *res; | |
| void __iomem *base; | |
| unsigned long board = z->resource.start; | |
| dev_info(&z->dev, "%s IDE controller (board: 0x%lx)\n", board_name, | |
| board); | |
| res = devm_request_mem_region(&z->dev, board + WARP_OFFSET_ATA, 0x1800, | |
| DRV_NAME); | |
| if (!res) | |
| return -ENXIO; | |
| host = ata_host_alloc(&z->dev, 1); | |
| if (!host) | |
| return -ENXIO; | |
| ap = host->ports[0]; | |
| base = devm_ioremap(&z->dev, board + WARP_OFFSET_ATA, 0x1800); | |
| if (!base) | |
| return -ENOMEM; | |
| ap->ops = &pata_cswarp_ops; | |
| ap->pio_mask = ATA_PIO4; | |
| ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY | | |
| ATA_FLAG_PIO_POLLING; | |
| ap->ioaddr.data_addr = base; | |
| ap->ioaddr.error_addr = base + 1 * 4; | |
| ap->ioaddr.feature_addr = base + 1 * 4; | |
| ap->ioaddr.nsect_addr = base + 2 * 4; | |
| ap->ioaddr.lbal_addr = base + 3 * 4; | |
| ap->ioaddr.lbam_addr = base + 4 * 4; | |
| ap->ioaddr.lbah_addr = base + 5 * 4; | |
| ap->ioaddr.device_addr = base + 6 * 4; | |
| ap->ioaddr.status_addr = base + 7 * 4; | |
| ap->ioaddr.command_addr = base + 7 * 4; | |
| ap->ioaddr.altstatus_addr = base + (0x1000 | (6UL << 2)); | |
| ap->ioaddr.ctl_addr = base + (0x1000 | (6UL << 2)); | |
| ata_port_desc(ap, "mmio %pR", res); | |
| return ata_host_activate(host, 0, NULL, | |
| IRQF_SHARED, &pata_cswarp_sht); | |
| } | |
| static void pata_cswarp_remove(struct zorro_dev *z) | |
| { | |
| struct ata_host *host = dev_get_drvdata(&z->dev); | |
| ata_host_detach(host); | |
| } | |
| static const struct zorro_device_id pata_cswarp_zorro_tbl[] = { | |
| { .id = ZORRO_PROD_CSLAB_WARP_1260 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(zorro, pata_cswarp_zorro_tbl); | |
| static struct zorro_driver pata_cswarp_driver = { | |
| .name = "pata_cswarp", | |
| .id_table = pata_cswarp_zorro_tbl, | |
| .probe = pata_cswarp_probe, | |
| .remove = pata_cswarp_remove, | |
| }; | |
| static int __init pata_cswarp_init(void) | |
| { | |
| return zorro_register_driver(&pata_cswarp_driver); | |
| } | |
| static void __exit pata_cswarp_unregister(void) | |
| { | |
| zorro_unregister_driver(&pata_cswarp_driver); | |
| } | |
| module_init(pata_cswarp_init); | |
| module_exit(pata_cswarp_unregister); | |
| MODULE_AUTHOR("Andrzej Rogozynski"); | |
| MODULE_DESCRIPTION("low-level driver for CSWarp PATA"); | |
| MODULE_LICENSE("GPL"); |