hwmon: Remove amd_energy driver
Commit 60268b0e8258 ("hwmon: (amd_energy) modify the visibility of
the counters") restricted visibility of AMD energy counters to work
around a side-channel attack using energy data to determine which
instructions are executed. The attack is described in 'PLATYPUS:
Software-based Power Side-Channel Attacks on x86'. It relies on quick
and accurate energy readings.
This change made the counters provided by the amd_energy driver
effectively unusable for non-provileged users. However, unprivileged
read access is the whole point of hardware monitoring attributes.
An attempt to remedy the situation by limiting and randomizing access
to chip registers was rejected by AMD. Since the driver is for all
practical purposes unusable, remove it.
Cc: Naveen Krishna Chatradhi <nchatrad@amd.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
diff --git a/Documentation/hwmon/amd_energy.rst b/Documentation/hwmon/amd_energy.rst
deleted file mode 100644
index 9d58cd5..0000000
--- a/Documentation/hwmon/amd_energy.rst
+++ /dev/null
@@ -1,119 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Kernel driver amd_energy
-==========================
-
-Supported chips:
-
-* AMD Family 17h Processors: Model 30h
-
-* AMD Family 19h Processors: Model 01h
-
- Prefix: 'amd_energy'
-
- Addresses used: RAPL MSRs
-
- Datasheets:
-
- - Processor Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors
-
- https://developer.amd.com/wp-content/resources/55570-B1_PUB.zip
-
- - Preliminary Processor Programming Reference (PPR) for AMD Family 17h Model 31h, Revision B0 Processors
-
- https://developer.amd.com/wp-content/resources/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip
-
-Author: Naveen Krishna Chatradhi <nchatrad@amd.com>
-
-Description
------------
-
-The Energy driver exposes the energy counters that are
-reported via the Running Average Power Limit (RAPL)
-Model-specific Registers (MSRs) via the hardware monitor
-(HWMON) sysfs interface.
-
-1. Power, Energy and Time Units
- MSR_RAPL_POWER_UNIT/ C001_0299:
- shared with all cores in the socket
-
-2. Energy consumed by each Core
- MSR_CORE_ENERGY_STATUS/ C001_029A:
- 32-bitRO, Accumulator, core-level power reporting
-
-3. Energy consumed by Socket
- MSR_PACKAGE_ENERGY_STATUS/ C001_029B:
- 32-bitRO, Accumulator, socket-level power reporting,
- shared with all cores in socket
-
-These registers are updated every 1ms and cleared on
-reset of the system.
-
-Note: If SMT is enabled, Linux enumerates all threads as cpus.
-Since, the energy status registers are accessed at core level,
-reading those registers from the sibling threads would result
-in duplicate values. Hence, energy counter entries are not
-populated for the siblings.
-
-Energy Caluclation
-------------------
-
-Energy information (in Joules) is based on the multiplier,
-1/2^ESU; where ESU is an unsigned integer read from
-MSR_RAPL_POWER_UNIT register. Default value is 10000b,
-indicating energy status unit is 15.3 micro-Joules increment.
-
-Reported values are scaled as per the formula
-
-scaled value = ((1/2^ESU) * (Raw value) * 1000000UL) in uJoules
-
-Users calculate power for a given domain by calculating
- dEnergy/dTime for that domain.
-
-Energy accumulation
---------------------------
-
-Current, Socket energy status register is 32bit, assuming a 240W
-2P system, the register would wrap around in
-
- 2^32*15.3 e-6/240 * 2 = 547.60833024 secs to wrap(~9 mins)
-
-The Core energy register may wrap around after several days.
-
-To improve the wrap around time, a kernel thread is implemented
-to accumulate the socket energy counters and one core energy counter
-per run to a respective 64-bit counter. The kernel thread starts
-running during probe, wakes up every 100secs and stops running
-when driver is removed.
-
-Frequency of the accumulator thread is set during the probe
-based on the chosen energy unit resolution. For example
-A. fine grain (1.625 micro J)
-B. course grain (0.125 milli J)
-
-A socket and core energy read would return the current register
-value added to the respective energy accumulator.
-
-Sysfs attributes
-----------------
-
-=============== ======== =====================================
-Attribute Label Description
-=============== ======== =====================================
-
-* For index N between [1] and [nr_cpus]
-
-=============== ======== ======================================
-energy[N]_input EcoreX Core Energy X = [0] to [nr_cpus - 1]
- Measured input core energy
-=============== ======== ======================================
-
-* For N between [nr_cpus] and [nr_cpus + nr_socks]
-
-=============== ======== ======================================
-energy[N]_input EsocketX Socket Energy X = [0] to [nr_socks -1]
- Measured input socket energy
-=============== ======== ======================================
-
-Note: To address CVE-2020-12912, the visibility of the energy[N]_input
-attributes is restricted to owner and groups only.
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 6bc696f..9ed60fa 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -39,7 +39,6 @@
adt7475
aht10
amc6821
- amd_energy
asb100
asc7621
aspeed-pwm-tacho
diff --git a/MAINTAINERS b/MAINTAINERS
index 8f4010d..8f61633 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -870,13 +870,6 @@
T: git git://people.freedesktop.org/~agd5f/linux
F: drivers/gpu/drm/amd/display/
-AMD ENERGY DRIVER
-M: Naveen Krishna Chatradhi <nchatrad@amd.com>
-L: linux-hwmon@vger.kernel.org
-S: Maintained
-F: Documentation/hwmon/amd_energy.rst
-F: drivers/hwmon/amd_energy.c
-
AMD FAM15H PROCESSOR POWER MONITORING DRIVER
M: Huang Rui <ray.huang@amd.com>
L: linux-hwmon@vger.kernel.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 0ddc974..8762490 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -321,16 +321,6 @@
This driver can also be built as a module. If so, the module
will be called fam15h_power.
-config SENSORS_AMD_ENERGY
- tristate "AMD RAPL MSR based Energy driver"
- depends on X86
- help
- If you say yes here you get support for core and package energy
- sensors, based on RAPL MSR for AMD family 17h and above CPUs.
-
- This driver can also be built as a module. If so, the module
- will be called as amd_energy.
-
config SENSORS_APPLESMC
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
depends on INPUT && X86
diff --git a/drivers/hwmon/amd_energy.c b/drivers/hwmon/amd_energy.c
deleted file mode 100644
index a86cc8d..0000000
--- a/drivers/hwmon/amd_energy.c
+++ /dev/null
@@ -1,379 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/*
- * Copyright (C) 2020 Advanced Micro Devices, Inc.
- */
-#include <asm/cpu_device_id.h>
-
-#include <linux/bits.h>
-#include <linux/cpu.h>
-#include <linux/cpumask.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/hwmon.h>
-#include <linux/kernel.h>
-#include <linux/kthread.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/processor.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/topology.h>
-#include <linux/types.h>
-
-#define DRVNAME "amd_energy"
-
-#define ENERGY_PWR_UNIT_MSR 0xC0010299
-#define ENERGY_CORE_MSR 0xC001029A
-#define ENERGY_PKG_MSR 0xC001029B
-
-#define AMD_ENERGY_UNIT_MASK 0x01F00
-#define AMD_ENERGY_MASK 0xFFFFFFFF
-
-struct sensor_accumulator {
- u64 energy_ctr;
- u64 prev_value;
-};
-
-struct amd_energy_data {
- struct hwmon_channel_info energy_info;
- const struct hwmon_channel_info *info[2];
- struct hwmon_chip_info chip;
- struct task_struct *wrap_accumulate;
- /* Lock around the accumulator */
- struct mutex lock;
- /* An accumulator for each core and socket */
- struct sensor_accumulator *accums;
- unsigned int timeout_ms;
- /* Energy Status Units */
- int energy_units;
- int nr_cpus;
- int nr_socks;
- int core_id;
- char (*label)[10];
-};
-
-static int amd_energy_read_labels(struct device *dev,
- enum hwmon_sensor_types type,
- u32 attr, int channel,
- const char **str)
-{
- struct amd_energy_data *data = dev_get_drvdata(dev);
-
- *str = data->label[channel];
- return 0;
-}
-
-static void get_energy_units(struct amd_energy_data *data)
-{
- u64 rapl_units;
-
- rdmsrl_safe(ENERGY_PWR_UNIT_MSR, &rapl_units);
- data->energy_units = (rapl_units & AMD_ENERGY_UNIT_MASK) >> 8;
-}
-
-static void accumulate_delta(struct amd_energy_data *data,
- int channel, int cpu, u32 reg)
-{
- struct sensor_accumulator *accum;
- u64 input;
-
- mutex_lock(&data->lock);
- rdmsrl_safe_on_cpu(cpu, reg, &input);
- input &= AMD_ENERGY_MASK;
-
- accum = &data->accums[channel];
- if (input >= accum->prev_value)
- accum->energy_ctr +=
- input - accum->prev_value;
- else
- accum->energy_ctr += UINT_MAX -
- accum->prev_value + input;
-
- accum->prev_value = input;
- mutex_unlock(&data->lock);
-}
-
-static void read_accumulate(struct amd_energy_data *data)
-{
- int sock, scpu, cpu;
-
- for (sock = 0; sock < data->nr_socks; sock++) {
- scpu = cpumask_first_and(cpu_online_mask,
- cpumask_of_node(sock));
-
- accumulate_delta(data, data->nr_cpus + sock,
- scpu, ENERGY_PKG_MSR);
- }
-
- if (data->core_id >= data->nr_cpus)
- data->core_id = 0;
-
- cpu = data->core_id;
- if (cpu_online(cpu))
- accumulate_delta(data, cpu, cpu, ENERGY_CORE_MSR);
-
- data->core_id++;
-}
-
-static void amd_add_delta(struct amd_energy_data *data, int ch,
- int cpu, long *val, u32 reg)
-{
- struct sensor_accumulator *accum;
- u64 input;
-
- mutex_lock(&data->lock);
- rdmsrl_safe_on_cpu(cpu, reg, &input);
- input &= AMD_ENERGY_MASK;
-
- accum = &data->accums[ch];
- if (input >= accum->prev_value)
- input += accum->energy_ctr -
- accum->prev_value;
- else
- input += UINT_MAX - accum->prev_value +
- accum->energy_ctr;
-
- /* Energy consumed = (1/(2^ESU) * RAW * 1000000UL) μJoules */
- *val = div64_ul(input * 1000000UL, BIT(data->energy_units));
-
- mutex_unlock(&data->lock);
-}
-
-static int amd_energy_read(struct device *dev,
- enum hwmon_sensor_types type,
- u32 attr, int channel, long *val)
-{
- struct amd_energy_data *data = dev_get_drvdata(dev);
- u32 reg;
- int cpu;
-
- if (channel >= data->nr_cpus) {
- cpu = cpumask_first_and(cpu_online_mask,
- cpumask_of_node
- (channel - data->nr_cpus));
- reg = ENERGY_PKG_MSR;
- } else {
- cpu = channel;
- if (!cpu_online(cpu))
- return -ENODEV;
-
- reg = ENERGY_CORE_MSR;
- }
- amd_add_delta(data, channel, cpu, val, reg);
-
- return 0;
-}
-
-static umode_t amd_energy_is_visible(const void *_data,
- enum hwmon_sensor_types type,
- u32 attr, int channel)
-{
- return 0440;
-}
-
-static int energy_accumulator(void *p)
-{
- struct amd_energy_data *data = (struct amd_energy_data *)p;
- unsigned int timeout = data->timeout_ms;
-
- while (!kthread_should_stop()) {
- /*
- * Ignoring the conditions such as
- * cpu being offline or rdmsr failure
- */
- read_accumulate(data);
-
- set_current_state(TASK_INTERRUPTIBLE);
- if (kthread_should_stop())
- break;
-
- schedule_timeout(msecs_to_jiffies(timeout));
- }
- return 0;
-}
-
-static const struct hwmon_ops amd_energy_ops = {
- .is_visible = amd_energy_is_visible,
- .read = amd_energy_read,
- .read_string = amd_energy_read_labels,
-};
-
-static int amd_create_sensor(struct device *dev,
- struct amd_energy_data *data,
- enum hwmon_sensor_types type, u32 config)
-{
- struct hwmon_channel_info *info = &data->energy_info;
- struct sensor_accumulator *accums;
- int i, num_siblings, cpus, sockets;
- u32 *s_config;
- char (*label_l)[10];
-
- /* Identify the number of siblings per core */
- num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1;
-
- sockets = num_possible_nodes();
-
- /*
- * Energy counter register is accessed at core level.
- * Hence, filterout the siblings.
- */
- cpus = num_present_cpus() / num_siblings;
-
- s_config = devm_kcalloc(dev, cpus + sockets + 1,
- sizeof(u32), GFP_KERNEL);
- if (!s_config)
- return -ENOMEM;
-
- accums = devm_kcalloc(dev, cpus + sockets,
- sizeof(struct sensor_accumulator),
- GFP_KERNEL);
- if (!accums)
- return -ENOMEM;
-
- label_l = devm_kcalloc(dev, cpus + sockets,
- sizeof(*label_l), GFP_KERNEL);
- if (!label_l)
- return -ENOMEM;
-
- info->type = type;
- info->config = s_config;
-
- data->nr_cpus = cpus;
- data->nr_socks = sockets;
- data->accums = accums;
- data->label = label_l;
-
- for (i = 0; i < cpus + sockets; i++) {
- s_config[i] = config;
- if (i < cpus)
- scnprintf(label_l[i], 10, "Ecore%03u", i);
- else
- scnprintf(label_l[i], 10, "Esocket%u", (i - cpus));
- }
-
- s_config[i] = 0;
- return 0;
-}
-
-static int amd_energy_probe(struct platform_device *pdev)
-{
- struct device *hwmon_dev;
- struct amd_energy_data *data;
- struct device *dev = &pdev->dev;
- int ret;
-
- data = devm_kzalloc(dev,
- sizeof(struct amd_energy_data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->chip.ops = &amd_energy_ops;
- data->chip.info = data->info;
-
- dev_set_drvdata(dev, data);
- /* Populate per-core energy reporting */
- data->info[0] = &data->energy_info;
- ret = amd_create_sensor(dev, data, hwmon_energy,
- HWMON_E_INPUT | HWMON_E_LABEL);
- if (ret)
- return ret;
-
- mutex_init(&data->lock);
- get_energy_units(data);
-
- hwmon_dev = devm_hwmon_device_register_with_info(dev, DRVNAME,
- data,
- &data->chip,
- NULL);
- if (IS_ERR(hwmon_dev))
- return PTR_ERR(hwmon_dev);
-
- /*
- * On a system with peak wattage of 250W
- * timeout = 2 ^ 32 / 2 ^ energy_units / 250 secs
- */
- data->timeout_ms = 1000 *
- BIT(min(28, 31 - data->energy_units)) / 250;
-
- data->wrap_accumulate = kthread_run(energy_accumulator, data,
- "%s", dev_name(hwmon_dev));
- return PTR_ERR_OR_ZERO(data->wrap_accumulate);
-}
-
-static int amd_energy_remove(struct platform_device *pdev)
-{
- struct amd_energy_data *data = dev_get_drvdata(&pdev->dev);
-
- if (data && data->wrap_accumulate)
- kthread_stop(data->wrap_accumulate);
-
- return 0;
-}
-
-static const struct platform_device_id amd_energy_ids[] = {
- { .name = DRVNAME, },
- {}
-};
-MODULE_DEVICE_TABLE(platform, amd_energy_ids);
-
-static struct platform_driver amd_energy_driver = {
- .probe = amd_energy_probe,
- .remove = amd_energy_remove,
- .id_table = amd_energy_ids,
- .driver = {
- .name = DRVNAME,
- },
-};
-
-static struct platform_device *amd_energy_platdev;
-
-static const struct x86_cpu_id cpu_ids[] __initconst = {
- X86_MATCH_VENDOR_FAM_MODEL(AMD, 0x17, 0x31, NULL),
- X86_MATCH_VENDOR_FAM_MODEL(AMD, 0x19, 0x01, NULL),
- X86_MATCH_VENDOR_FAM_MODEL(AMD, 0x19, 0x30, NULL),
- {}
-};
-MODULE_DEVICE_TABLE(x86cpu, cpu_ids);
-
-static int __init amd_energy_init(void)
-{
- int ret;
-
- if (!x86_match_cpu(cpu_ids))
- return -ENODEV;
-
- ret = platform_driver_register(&amd_energy_driver);
- if (ret)
- return ret;
-
- amd_energy_platdev = platform_device_alloc(DRVNAME, 0);
- if (!amd_energy_platdev) {
- platform_driver_unregister(&amd_energy_driver);
- return -ENOMEM;
- }
-
- ret = platform_device_add(amd_energy_platdev);
- if (ret) {
- platform_device_put(amd_energy_platdev);
- platform_driver_unregister(&amd_energy_driver);
- return ret;
- }
-
- return ret;
-}
-
-static void __exit amd_energy_exit(void)
-{
- platform_device_unregister(amd_energy_platdev);
- platform_driver_unregister(&amd_energy_driver);
-}
-
-module_init(amd_energy_init);
-module_exit(amd_energy_exit);
-
-MODULE_DESCRIPTION("Driver for AMD Energy reporting from RAPL MSR via HWMON interface");
-MODULE_AUTHOR("Naveen Krishna Chatradhi <nchatrad@amd.com>");
-MODULE_LICENSE("GPL");
