| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * phy-can-transceiver.c - phy driver for CAN transceivers | 
 |  * | 
 |  * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com | 
 |  * | 
 |  */ | 
 | #include<linux/phy/phy.h> | 
 | #include<linux/platform_device.h> | 
 | #include<linux/module.h> | 
 | #include<linux/gpio.h> | 
 | #include<linux/gpio/consumer.h> | 
 | #include <linux/mux/consumer.h> | 
 |  | 
 | struct can_transceiver_data { | 
 | 	u32 flags; | 
 | #define CAN_TRANSCEIVER_STB_PRESENT	BIT(0) | 
 | #define CAN_TRANSCEIVER_EN_PRESENT	BIT(1) | 
 | }; | 
 |  | 
 | struct can_transceiver_phy { | 
 | 	struct phy *generic_phy; | 
 | 	struct gpio_desc *standby_gpio; | 
 | 	struct gpio_desc *enable_gpio; | 
 | 	struct mux_state *mux_state; | 
 | }; | 
 |  | 
 | /* Power on function */ | 
 | static int can_transceiver_phy_power_on(struct phy *phy) | 
 | { | 
 | 	struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy); | 
 | 	int ret; | 
 |  | 
 | 	if (can_transceiver_phy->mux_state) { | 
 | 		ret = mux_state_select(can_transceiver_phy->mux_state); | 
 | 		if (ret) { | 
 | 			dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret); | 
 | 			return ret; | 
 | 		} | 
 | 	} | 
 | 	if (can_transceiver_phy->standby_gpio) | 
 | 		gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0); | 
 | 	if (can_transceiver_phy->enable_gpio) | 
 | 		gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 1); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Power off function */ | 
 | static int can_transceiver_phy_power_off(struct phy *phy) | 
 | { | 
 | 	struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy); | 
 |  | 
 | 	if (can_transceiver_phy->standby_gpio) | 
 | 		gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1); | 
 | 	if (can_transceiver_phy->enable_gpio) | 
 | 		gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0); | 
 | 	if (can_transceiver_phy->mux_state) | 
 | 		mux_state_deselect(can_transceiver_phy->mux_state); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct phy_ops can_transceiver_phy_ops = { | 
 | 	.power_on	= can_transceiver_phy_power_on, | 
 | 	.power_off	= can_transceiver_phy_power_off, | 
 | 	.owner		= THIS_MODULE, | 
 | }; | 
 |  | 
 | static const struct can_transceiver_data tcan1042_drvdata = { | 
 | 	.flags = CAN_TRANSCEIVER_STB_PRESENT, | 
 | }; | 
 |  | 
 | static const struct can_transceiver_data tcan1043_drvdata = { | 
 | 	.flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_EN_PRESENT, | 
 | }; | 
 |  | 
 | static const struct of_device_id can_transceiver_phy_ids[] = { | 
 | 	{ | 
 | 		.compatible = "ti,tcan1042", | 
 | 		.data = &tcan1042_drvdata | 
 | 	}, | 
 | 	{ | 
 | 		.compatible = "ti,tcan1043", | 
 | 		.data = &tcan1043_drvdata | 
 | 	}, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, can_transceiver_phy_ids); | 
 |  | 
 | static int can_transceiver_phy_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct phy_provider *phy_provider; | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct can_transceiver_phy *can_transceiver_phy; | 
 | 	const struct can_transceiver_data *drvdata; | 
 | 	const struct of_device_id *match; | 
 | 	struct phy *phy; | 
 | 	struct gpio_desc *standby_gpio; | 
 | 	struct gpio_desc *enable_gpio; | 
 | 	u32 max_bitrate = 0; | 
 |  | 
 | 	can_transceiver_phy = devm_kzalloc(dev, sizeof(struct can_transceiver_phy), GFP_KERNEL); | 
 | 	if (!can_transceiver_phy) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node); | 
 | 	drvdata = match->data; | 
 |  | 
 | 	if (of_property_read_bool(dev->of_node, "mux-states")) { | 
 | 		struct mux_state *mux_state; | 
 |  | 
 | 		mux_state = devm_mux_state_get(dev, NULL); | 
 | 		if (IS_ERR(mux_state)) | 
 | 			return dev_err_probe(&pdev->dev, PTR_ERR(mux_state), | 
 | 					     "failed to get mux\n"); | 
 | 		can_transceiver_phy->mux_state = mux_state; | 
 | 	} | 
 |  | 
 | 	phy = devm_phy_create(dev, dev->of_node, | 
 | 			      &can_transceiver_phy_ops); | 
 | 	if (IS_ERR(phy)) { | 
 | 		dev_err(dev, "failed to create can transceiver phy\n"); | 
 | 		return PTR_ERR(phy); | 
 | 	} | 
 |  | 
 | 	device_property_read_u32(dev, "max-bitrate", &max_bitrate); | 
 | 	if (!max_bitrate) | 
 | 		dev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit\n"); | 
 | 	phy->attrs.max_link_rate = max_bitrate; | 
 |  | 
 | 	can_transceiver_phy->generic_phy = phy; | 
 |  | 
 | 	if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) { | 
 | 		standby_gpio = devm_gpiod_get_optional(dev, "standby", GPIOD_OUT_HIGH); | 
 | 		if (IS_ERR(standby_gpio)) | 
 | 			return PTR_ERR(standby_gpio); | 
 | 		can_transceiver_phy->standby_gpio = standby_gpio; | 
 | 	} | 
 |  | 
 | 	if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) { | 
 | 		enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW); | 
 | 		if (IS_ERR(enable_gpio)) | 
 | 			return PTR_ERR(enable_gpio); | 
 | 		can_transceiver_phy->enable_gpio = enable_gpio; | 
 | 	} | 
 |  | 
 | 	phy_set_drvdata(can_transceiver_phy->generic_phy, can_transceiver_phy); | 
 |  | 
 | 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); | 
 |  | 
 | 	return PTR_ERR_OR_ZERO(phy_provider); | 
 | } | 
 |  | 
 | static struct platform_driver can_transceiver_phy_driver = { | 
 | 	.probe = can_transceiver_phy_probe, | 
 | 	.driver = { | 
 | 		.name = "can-transceiver-phy", | 
 | 		.of_match_table = can_transceiver_phy_ids, | 
 | 	}, | 
 | }; | 
 |  | 
 | module_platform_driver(can_transceiver_phy_driver); | 
 |  | 
 | MODULE_AUTHOR("Faiz Abbas <faiz_abbas@ti.com>"); | 
 | MODULE_AUTHOR("Aswath Govindraju <a-govindraju@ti.com>"); | 
 | MODULE_DESCRIPTION("CAN TRANSCEIVER PHY driver"); | 
 | MODULE_LICENSE("GPL v2"); |