|  | /* | 
|  | * Copyright (C) 2003 Sistina Software Limited. | 
|  | * Copyright (C) 2005-2008 Red Hat, Inc. All rights reserved. | 
|  | * | 
|  | * This file is released under the GPL. | 
|  | */ | 
|  |  | 
|  | #include "dm-bio-record.h" | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/mempool.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/device-mapper.h> | 
|  | #include <linux/dm-io.h> | 
|  | #include <linux/dm-dirty-log.h> | 
|  | #include <linux/dm-kcopyd.h> | 
|  | #include <linux/dm-region-hash.h> | 
|  |  | 
|  | #define DM_MSG_PREFIX "raid1" | 
|  |  | 
|  | #define MAX_RECOVERY 1	/* Maximum number of regions recovered in parallel. */ | 
|  |  | 
|  | #define DM_RAID1_HANDLE_ERRORS 0x01 | 
|  | #define errors_handled(p)	((p)->features & DM_RAID1_HANDLE_ERRORS) | 
|  |  | 
|  | static DECLARE_WAIT_QUEUE_HEAD(_kmirrord_recovery_stopped); | 
|  |  | 
|  | /*----------------------------------------------------------------- | 
|  | * Mirror set structures. | 
|  | *---------------------------------------------------------------*/ | 
|  | enum dm_raid1_error { | 
|  | DM_RAID1_WRITE_ERROR, | 
|  | DM_RAID1_FLUSH_ERROR, | 
|  | DM_RAID1_SYNC_ERROR, | 
|  | DM_RAID1_READ_ERROR | 
|  | }; | 
|  |  | 
|  | struct mirror { | 
|  | struct mirror_set *ms; | 
|  | atomic_t error_count; | 
|  | unsigned long error_type; | 
|  | struct dm_dev *dev; | 
|  | sector_t offset; | 
|  | }; | 
|  |  | 
|  | struct mirror_set { | 
|  | struct dm_target *ti; | 
|  | struct list_head list; | 
|  |  | 
|  | uint64_t features; | 
|  |  | 
|  | spinlock_t lock;	/* protects the lists */ | 
|  | struct bio_list reads; | 
|  | struct bio_list writes; | 
|  | struct bio_list failures; | 
|  | struct bio_list holds;	/* bios are waiting until suspend */ | 
|  |  | 
|  | struct dm_region_hash *rh; | 
|  | struct dm_kcopyd_client *kcopyd_client; | 
|  | struct dm_io_client *io_client; | 
|  | mempool_t *read_record_pool; | 
|  |  | 
|  | /* recovery */ | 
|  | region_t nr_regions; | 
|  | int in_sync; | 
|  | int log_failure; | 
|  | int leg_failure; | 
|  | atomic_t suspend; | 
|  |  | 
|  | atomic_t default_mirror;	/* Default mirror */ | 
|  |  | 
|  | struct workqueue_struct *kmirrord_wq; | 
|  | struct work_struct kmirrord_work; | 
|  | struct timer_list timer; | 
|  | unsigned long timer_pending; | 
|  |  | 
|  | struct work_struct trigger_event; | 
|  |  | 
|  | unsigned nr_mirrors; | 
|  | struct mirror mirror[0]; | 
|  | }; | 
|  |  | 
|  | static void wakeup_mirrord(void *context) | 
|  | { | 
|  | struct mirror_set *ms = context; | 
|  |  | 
|  | queue_work(ms->kmirrord_wq, &ms->kmirrord_work); | 
|  | } | 
|  |  | 
|  | static void delayed_wake_fn(unsigned long data) | 
|  | { | 
|  | struct mirror_set *ms = (struct mirror_set *) data; | 
|  |  | 
|  | clear_bit(0, &ms->timer_pending); | 
|  | wakeup_mirrord(ms); | 
|  | } | 
|  |  | 
|  | static void delayed_wake(struct mirror_set *ms) | 
|  | { | 
|  | if (test_and_set_bit(0, &ms->timer_pending)) | 
|  | return; | 
|  |  | 
|  | ms->timer.expires = jiffies + HZ / 5; | 
|  | ms->timer.data = (unsigned long) ms; | 
|  | ms->timer.function = delayed_wake_fn; | 
|  | add_timer(&ms->timer); | 
|  | } | 
|  |  | 
|  | static void wakeup_all_recovery_waiters(void *context) | 
|  | { | 
|  | wake_up_all(&_kmirrord_recovery_stopped); | 
|  | } | 
|  |  | 
|  | static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw) | 
|  | { | 
|  | unsigned long flags; | 
|  | int should_wake = 0; | 
|  | struct bio_list *bl; | 
|  |  | 
|  | bl = (rw == WRITE) ? &ms->writes : &ms->reads; | 
|  | spin_lock_irqsave(&ms->lock, flags); | 
|  | should_wake = !(bl->head); | 
|  | bio_list_add(bl, bio); | 
|  | spin_unlock_irqrestore(&ms->lock, flags); | 
|  |  | 
|  | if (should_wake) | 
|  | wakeup_mirrord(ms); | 
|  | } | 
|  |  | 
|  | static void dispatch_bios(void *context, struct bio_list *bio_list) | 
|  | { | 
|  | struct mirror_set *ms = context; | 
|  | struct bio *bio; | 
|  |  | 
|  | while ((bio = bio_list_pop(bio_list))) | 
|  | queue_bio(ms, bio, WRITE); | 
|  | } | 
|  |  | 
|  | #define MIN_READ_RECORDS 20 | 
|  | struct dm_raid1_read_record { | 
|  | struct mirror *m; | 
|  | struct dm_bio_details details; | 
|  | }; | 
|  |  | 
|  | static struct kmem_cache *_dm_raid1_read_record_cache; | 
|  |  | 
|  | /* | 
|  | * Every mirror should look like this one. | 
|  | */ | 
|  | #define DEFAULT_MIRROR 0 | 
|  |  | 
|  | /* | 
|  | * This is yucky.  We squirrel the mirror struct away inside | 
|  | * bi_next for read/write buffers.  This is safe since the bh | 
|  | * doesn't get submitted to the lower levels of block layer. | 
|  | */ | 
|  | static struct mirror *bio_get_m(struct bio *bio) | 
|  | { | 
|  | return (struct mirror *) bio->bi_next; | 
|  | } | 
|  |  | 
|  | static void bio_set_m(struct bio *bio, struct mirror *m) | 
|  | { | 
|  | bio->bi_next = (struct bio *) m; | 
|  | } | 
|  |  | 
|  | static struct mirror *get_default_mirror(struct mirror_set *ms) | 
|  | { | 
|  | return &ms->mirror[atomic_read(&ms->default_mirror)]; | 
|  | } | 
|  |  | 
|  | static void set_default_mirror(struct mirror *m) | 
|  | { | 
|  | struct mirror_set *ms = m->ms; | 
|  | struct mirror *m0 = &(ms->mirror[0]); | 
|  |  | 
|  | atomic_set(&ms->default_mirror, m - m0); | 
|  | } | 
|  |  | 
|  | static struct mirror *get_valid_mirror(struct mirror_set *ms) | 
|  | { | 
|  | struct mirror *m; | 
|  |  | 
|  | for (m = ms->mirror; m < ms->mirror + ms->nr_mirrors; m++) | 
|  | if (!atomic_read(&m->error_count)) | 
|  | return m; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* fail_mirror | 
|  | * @m: mirror device to fail | 
|  | * @error_type: one of the enum's, DM_RAID1_*_ERROR | 
|  | * | 
|  | * If errors are being handled, record the type of | 
|  | * error encountered for this device.  If this type | 
|  | * of error has already been recorded, we can return; | 
|  | * otherwise, we must signal userspace by triggering | 
|  | * an event.  Additionally, if the device is the | 
|  | * primary device, we must choose a new primary, but | 
|  | * only if the mirror is in-sync. | 
|  | * | 
|  | * This function must not block. | 
|  | */ | 
|  | static void fail_mirror(struct mirror *m, enum dm_raid1_error error_type) | 
|  | { | 
|  | struct mirror_set *ms = m->ms; | 
|  | struct mirror *new; | 
|  |  | 
|  | ms->leg_failure = 1; | 
|  |  | 
|  | /* | 
|  | * error_count is used for nothing more than a | 
|  | * simple way to tell if a device has encountered | 
|  | * errors. | 
|  | */ | 
|  | atomic_inc(&m->error_count); | 
|  |  | 
|  | if (test_and_set_bit(error_type, &m->error_type)) | 
|  | return; | 
|  |  | 
|  | if (!errors_handled(ms)) | 
|  | return; | 
|  |  | 
|  | if (m != get_default_mirror(ms)) | 
|  | goto out; | 
|  |  | 
|  | if (!ms->in_sync) { | 
|  | /* | 
|  | * Better to issue requests to same failing device | 
|  | * than to risk returning corrupt data. | 
|  | */ | 
|  | DMERR("Primary mirror (%s) failed while out-of-sync: " | 
|  | "Reads may fail.", m->dev->name); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | new = get_valid_mirror(ms); | 
|  | if (new) | 
|  | set_default_mirror(new); | 
|  | else | 
|  | DMWARN("All sides of mirror have failed."); | 
|  |  | 
|  | out: | 
|  | schedule_work(&ms->trigger_event); | 
|  | } | 
|  |  | 
|  | static int mirror_flush(struct dm_target *ti) | 
|  | { | 
|  | struct mirror_set *ms = ti->private; | 
|  | unsigned long error_bits; | 
|  |  | 
|  | unsigned int i; | 
|  | struct dm_io_region io[ms->nr_mirrors]; | 
|  | struct mirror *m; | 
|  | struct dm_io_request io_req = { | 
|  | .bi_rw = WRITE_FLUSH, | 
|  | .mem.type = DM_IO_KMEM, | 
|  | .mem.ptr.addr = NULL, | 
|  | .client = ms->io_client, | 
|  | }; | 
|  |  | 
|  | for (i = 0, m = ms->mirror; i < ms->nr_mirrors; i++, m++) { | 
|  | io[i].bdev = m->dev->bdev; | 
|  | io[i].sector = 0; | 
|  | io[i].count = 0; | 
|  | } | 
|  |  | 
|  | error_bits = -1; | 
|  | dm_io(&io_req, ms->nr_mirrors, io, &error_bits); | 
|  | if (unlikely(error_bits != 0)) { | 
|  | for (i = 0; i < ms->nr_mirrors; i++) | 
|  | if (test_bit(i, &error_bits)) | 
|  | fail_mirror(ms->mirror + i, | 
|  | DM_RAID1_FLUSH_ERROR); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------- | 
|  | * Recovery. | 
|  | * | 
|  | * When a mirror is first activated we may find that some regions | 
|  | * are in the no-sync state.  We have to recover these by | 
|  | * recopying from the default mirror to all the others. | 
|  | *---------------------------------------------------------------*/ | 
|  | static void recovery_complete(int read_err, unsigned long write_err, | 
|  | void *context) | 
|  | { | 
|  | struct dm_region *reg = context; | 
|  | struct mirror_set *ms = dm_rh_region_context(reg); | 
|  | int m, bit = 0; | 
|  |  | 
|  | if (read_err) { | 
|  | /* Read error means the failure of default mirror. */ | 
|  | DMERR_LIMIT("Unable to read primary mirror during recovery"); | 
|  | fail_mirror(get_default_mirror(ms), DM_RAID1_SYNC_ERROR); | 
|  | } | 
|  |  | 
|  | if (write_err) { | 
|  | DMERR_LIMIT("Write error during recovery (error = 0x%lx)", | 
|  | write_err); | 
|  | /* | 
|  | * Bits correspond to devices (excluding default mirror). | 
|  | * The default mirror cannot change during recovery. | 
|  | */ | 
|  | for (m = 0; m < ms->nr_mirrors; m++) { | 
|  | if (&ms->mirror[m] == get_default_mirror(ms)) | 
|  | continue; | 
|  | if (test_bit(bit, &write_err)) | 
|  | fail_mirror(ms->mirror + m, | 
|  | DM_RAID1_SYNC_ERROR); | 
|  | bit++; | 
|  | } | 
|  | } | 
|  |  | 
|  | dm_rh_recovery_end(reg, !(read_err || write_err)); | 
|  | } | 
|  |  | 
|  | static int recover(struct mirror_set *ms, struct dm_region *reg) | 
|  | { | 
|  | int r; | 
|  | unsigned i; | 
|  | struct dm_io_region from, to[DM_KCOPYD_MAX_REGIONS], *dest; | 
|  | struct mirror *m; | 
|  | unsigned long flags = 0; | 
|  | region_t key = dm_rh_get_region_key(reg); | 
|  | sector_t region_size = dm_rh_get_region_size(ms->rh); | 
|  |  | 
|  | /* fill in the source */ | 
|  | m = get_default_mirror(ms); | 
|  | from.bdev = m->dev->bdev; | 
|  | from.sector = m->offset + dm_rh_region_to_sector(ms->rh, key); | 
|  | if (key == (ms->nr_regions - 1)) { | 
|  | /* | 
|  | * The final region may be smaller than | 
|  | * region_size. | 
|  | */ | 
|  | from.count = ms->ti->len & (region_size - 1); | 
|  | if (!from.count) | 
|  | from.count = region_size; | 
|  | } else | 
|  | from.count = region_size; | 
|  |  | 
|  | /* fill in the destinations */ | 
|  | for (i = 0, dest = to; i < ms->nr_mirrors; i++) { | 
|  | if (&ms->mirror[i] == get_default_mirror(ms)) | 
|  | continue; | 
|  |  | 
|  | m = ms->mirror + i; | 
|  | dest->bdev = m->dev->bdev; | 
|  | dest->sector = m->offset + dm_rh_region_to_sector(ms->rh, key); | 
|  | dest->count = from.count; | 
|  | dest++; | 
|  | } | 
|  |  | 
|  | /* hand to kcopyd */ | 
|  | if (!errors_handled(ms)) | 
|  | set_bit(DM_KCOPYD_IGNORE_ERROR, &flags); | 
|  |  | 
|  | r = dm_kcopyd_copy(ms->kcopyd_client, &from, ms->nr_mirrors - 1, to, | 
|  | flags, recovery_complete, reg); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static void do_recovery(struct mirror_set *ms) | 
|  | { | 
|  | struct dm_region *reg; | 
|  | struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | 
|  | int r; | 
|  |  | 
|  | /* | 
|  | * Start quiescing some regions. | 
|  | */ | 
|  | dm_rh_recovery_prepare(ms->rh); | 
|  |  | 
|  | /* | 
|  | * Copy any already quiesced regions. | 
|  | */ | 
|  | while ((reg = dm_rh_recovery_start(ms->rh))) { | 
|  | r = recover(ms, reg); | 
|  | if (r) | 
|  | dm_rh_recovery_end(reg, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Update the in sync flag. | 
|  | */ | 
|  | if (!ms->in_sync && | 
|  | (log->type->get_sync_count(log) == ms->nr_regions)) { | 
|  | /* the sync is complete */ | 
|  | dm_table_event(ms->ti->table); | 
|  | ms->in_sync = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------- | 
|  | * Reads | 
|  | *---------------------------------------------------------------*/ | 
|  | static struct mirror *choose_mirror(struct mirror_set *ms, sector_t sector) | 
|  | { | 
|  | struct mirror *m = get_default_mirror(ms); | 
|  |  | 
|  | do { | 
|  | if (likely(!atomic_read(&m->error_count))) | 
|  | return m; | 
|  |  | 
|  | if (m-- == ms->mirror) | 
|  | m += ms->nr_mirrors; | 
|  | } while (m != get_default_mirror(ms)); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int default_ok(struct mirror *m) | 
|  | { | 
|  | struct mirror *default_mirror = get_default_mirror(m->ms); | 
|  |  | 
|  | return !atomic_read(&default_mirror->error_count); | 
|  | } | 
|  |  | 
|  | static int mirror_available(struct mirror_set *ms, struct bio *bio) | 
|  | { | 
|  | struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | 
|  | region_t region = dm_rh_bio_to_region(ms->rh, bio); | 
|  |  | 
|  | if (log->type->in_sync(log, region, 0)) | 
|  | return choose_mirror(ms,  bio->bi_sector) ? 1 : 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * remap a buffer to a particular mirror. | 
|  | */ | 
|  | static sector_t map_sector(struct mirror *m, struct bio *bio) | 
|  | { | 
|  | if (unlikely(!bio->bi_size)) | 
|  | return 0; | 
|  | return m->offset + dm_target_offset(m->ms->ti, bio->bi_sector); | 
|  | } | 
|  |  | 
|  | static void map_bio(struct mirror *m, struct bio *bio) | 
|  | { | 
|  | bio->bi_bdev = m->dev->bdev; | 
|  | bio->bi_sector = map_sector(m, bio); | 
|  | } | 
|  |  | 
|  | static void map_region(struct dm_io_region *io, struct mirror *m, | 
|  | struct bio *bio) | 
|  | { | 
|  | io->bdev = m->dev->bdev; | 
|  | io->sector = map_sector(m, bio); | 
|  | io->count = bio->bi_size >> 9; | 
|  | } | 
|  |  | 
|  | static void hold_bio(struct mirror_set *ms, struct bio *bio) | 
|  | { | 
|  | /* | 
|  | * Lock is required to avoid race condition during suspend | 
|  | * process. | 
|  | */ | 
|  | spin_lock_irq(&ms->lock); | 
|  |  | 
|  | if (atomic_read(&ms->suspend)) { | 
|  | spin_unlock_irq(&ms->lock); | 
|  |  | 
|  | /* | 
|  | * If device is suspended, complete the bio. | 
|  | */ | 
|  | if (dm_noflush_suspending(ms->ti)) | 
|  | bio_endio(bio, DM_ENDIO_REQUEUE); | 
|  | else | 
|  | bio_endio(bio, -EIO); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Hold bio until the suspend is complete. | 
|  | */ | 
|  | bio_list_add(&ms->holds, bio); | 
|  | spin_unlock_irq(&ms->lock); | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------- | 
|  | * Reads | 
|  | *---------------------------------------------------------------*/ | 
|  | static void read_callback(unsigned long error, void *context) | 
|  | { | 
|  | struct bio *bio = context; | 
|  | struct mirror *m; | 
|  |  | 
|  | m = bio_get_m(bio); | 
|  | bio_set_m(bio, NULL); | 
|  |  | 
|  | if (likely(!error)) { | 
|  | bio_endio(bio, 0); | 
|  | return; | 
|  | } | 
|  |  | 
|  | fail_mirror(m, DM_RAID1_READ_ERROR); | 
|  |  | 
|  | if (likely(default_ok(m)) || mirror_available(m->ms, bio)) { | 
|  | DMWARN_LIMIT("Read failure on mirror device %s.  " | 
|  | "Trying alternative device.", | 
|  | m->dev->name); | 
|  | queue_bio(m->ms, bio, bio_rw(bio)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | DMERR_LIMIT("Read failure on mirror device %s.  Failing I/O.", | 
|  | m->dev->name); | 
|  | bio_endio(bio, -EIO); | 
|  | } | 
|  |  | 
|  | /* Asynchronous read. */ | 
|  | static void read_async_bio(struct mirror *m, struct bio *bio) | 
|  | { | 
|  | struct dm_io_region io; | 
|  | struct dm_io_request io_req = { | 
|  | .bi_rw = READ, | 
|  | .mem.type = DM_IO_BVEC, | 
|  | .mem.ptr.bvec = bio->bi_io_vec + bio->bi_idx, | 
|  | .notify.fn = read_callback, | 
|  | .notify.context = bio, | 
|  | .client = m->ms->io_client, | 
|  | }; | 
|  |  | 
|  | map_region(&io, m, bio); | 
|  | bio_set_m(bio, m); | 
|  | BUG_ON(dm_io(&io_req, 1, &io, NULL)); | 
|  | } | 
|  |  | 
|  | static inline int region_in_sync(struct mirror_set *ms, region_t region, | 
|  | int may_block) | 
|  | { | 
|  | int state = dm_rh_get_state(ms->rh, region, may_block); | 
|  | return state == DM_RH_CLEAN || state == DM_RH_DIRTY; | 
|  | } | 
|  |  | 
|  | static void do_reads(struct mirror_set *ms, struct bio_list *reads) | 
|  | { | 
|  | region_t region; | 
|  | struct bio *bio; | 
|  | struct mirror *m; | 
|  |  | 
|  | while ((bio = bio_list_pop(reads))) { | 
|  | region = dm_rh_bio_to_region(ms->rh, bio); | 
|  | m = get_default_mirror(ms); | 
|  |  | 
|  | /* | 
|  | * We can only read balance if the region is in sync. | 
|  | */ | 
|  | if (likely(region_in_sync(ms, region, 1))) | 
|  | m = choose_mirror(ms, bio->bi_sector); | 
|  | else if (m && atomic_read(&m->error_count)) | 
|  | m = NULL; | 
|  |  | 
|  | if (likely(m)) | 
|  | read_async_bio(m, bio); | 
|  | else | 
|  | bio_endio(bio, -EIO); | 
|  | } | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------- | 
|  | * Writes. | 
|  | * | 
|  | * We do different things with the write io depending on the | 
|  | * state of the region that it's in: | 
|  | * | 
|  | * SYNC: 	increment pending, use kcopyd to write to *all* mirrors | 
|  | * RECOVERING:	delay the io until recovery completes | 
|  | * NOSYNC:	increment pending, just write to the default mirror | 
|  | *---------------------------------------------------------------*/ | 
|  |  | 
|  |  | 
|  | static void write_callback(unsigned long error, void *context) | 
|  | { | 
|  | unsigned i, ret = 0; | 
|  | struct bio *bio = (struct bio *) context; | 
|  | struct mirror_set *ms; | 
|  | int should_wake = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | ms = bio_get_m(bio)->ms; | 
|  | bio_set_m(bio, NULL); | 
|  |  | 
|  | /* | 
|  | * NOTE: We don't decrement the pending count here, | 
|  | * instead it is done by the targets endio function. | 
|  | * This way we handle both writes to SYNC and NOSYNC | 
|  | * regions with the same code. | 
|  | */ | 
|  | if (likely(!error)) { | 
|  | bio_endio(bio, ret); | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ms->nr_mirrors; i++) | 
|  | if (test_bit(i, &error)) | 
|  | fail_mirror(ms->mirror + i, DM_RAID1_WRITE_ERROR); | 
|  |  | 
|  | /* | 
|  | * Need to raise event.  Since raising | 
|  | * events can block, we need to do it in | 
|  | * the main thread. | 
|  | */ | 
|  | spin_lock_irqsave(&ms->lock, flags); | 
|  | if (!ms->failures.head) | 
|  | should_wake = 1; | 
|  | bio_list_add(&ms->failures, bio); | 
|  | spin_unlock_irqrestore(&ms->lock, flags); | 
|  | if (should_wake) | 
|  | wakeup_mirrord(ms); | 
|  | } | 
|  |  | 
|  | static void do_write(struct mirror_set *ms, struct bio *bio) | 
|  | { | 
|  | unsigned int i; | 
|  | struct dm_io_region io[ms->nr_mirrors], *dest = io; | 
|  | struct mirror *m; | 
|  | struct dm_io_request io_req = { | 
|  | .bi_rw = WRITE | (bio->bi_rw & WRITE_FLUSH_FUA), | 
|  | .mem.type = DM_IO_BVEC, | 
|  | .mem.ptr.bvec = bio->bi_io_vec + bio->bi_idx, | 
|  | .notify.fn = write_callback, | 
|  | .notify.context = bio, | 
|  | .client = ms->io_client, | 
|  | }; | 
|  |  | 
|  | if (bio->bi_rw & REQ_DISCARD) { | 
|  | io_req.bi_rw |= REQ_DISCARD; | 
|  | io_req.mem.type = DM_IO_KMEM; | 
|  | io_req.mem.ptr.addr = NULL; | 
|  | } | 
|  |  | 
|  | for (i = 0, m = ms->mirror; i < ms->nr_mirrors; i++, m++) | 
|  | map_region(dest++, m, bio); | 
|  |  | 
|  | /* | 
|  | * Use default mirror because we only need it to retrieve the reference | 
|  | * to the mirror set in write_callback(). | 
|  | */ | 
|  | bio_set_m(bio, get_default_mirror(ms)); | 
|  |  | 
|  | BUG_ON(dm_io(&io_req, ms->nr_mirrors, io, NULL)); | 
|  | } | 
|  |  | 
|  | static void do_writes(struct mirror_set *ms, struct bio_list *writes) | 
|  | { | 
|  | int state; | 
|  | struct bio *bio; | 
|  | struct bio_list sync, nosync, recover, *this_list = NULL; | 
|  | struct bio_list requeue; | 
|  | struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | 
|  | region_t region; | 
|  |  | 
|  | if (!writes->head) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Classify each write. | 
|  | */ | 
|  | bio_list_init(&sync); | 
|  | bio_list_init(&nosync); | 
|  | bio_list_init(&recover); | 
|  | bio_list_init(&requeue); | 
|  |  | 
|  | while ((bio = bio_list_pop(writes))) { | 
|  | if ((bio->bi_rw & REQ_FLUSH) || | 
|  | (bio->bi_rw & REQ_DISCARD)) { | 
|  | bio_list_add(&sync, bio); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | region = dm_rh_bio_to_region(ms->rh, bio); | 
|  |  | 
|  | if (log->type->is_remote_recovering && | 
|  | log->type->is_remote_recovering(log, region)) { | 
|  | bio_list_add(&requeue, bio); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | state = dm_rh_get_state(ms->rh, region, 1); | 
|  | switch (state) { | 
|  | case DM_RH_CLEAN: | 
|  | case DM_RH_DIRTY: | 
|  | this_list = &sync; | 
|  | break; | 
|  |  | 
|  | case DM_RH_NOSYNC: | 
|  | this_list = &nosync; | 
|  | break; | 
|  |  | 
|  | case DM_RH_RECOVERING: | 
|  | this_list = &recover; | 
|  | break; | 
|  | } | 
|  |  | 
|  | bio_list_add(this_list, bio); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Add bios that are delayed due to remote recovery | 
|  | * back on to the write queue | 
|  | */ | 
|  | if (unlikely(requeue.head)) { | 
|  | spin_lock_irq(&ms->lock); | 
|  | bio_list_merge(&ms->writes, &requeue); | 
|  | spin_unlock_irq(&ms->lock); | 
|  | delayed_wake(ms); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Increment the pending counts for any regions that will | 
|  | * be written to (writes to recover regions are going to | 
|  | * be delayed). | 
|  | */ | 
|  | dm_rh_inc_pending(ms->rh, &sync); | 
|  | dm_rh_inc_pending(ms->rh, &nosync); | 
|  |  | 
|  | /* | 
|  | * If the flush fails on a previous call and succeeds here, | 
|  | * we must not reset the log_failure variable.  We need | 
|  | * userspace interaction to do that. | 
|  | */ | 
|  | ms->log_failure = dm_rh_flush(ms->rh) ? 1 : ms->log_failure; | 
|  |  | 
|  | /* | 
|  | * Dispatch io. | 
|  | */ | 
|  | if (unlikely(ms->log_failure) && errors_handled(ms)) { | 
|  | spin_lock_irq(&ms->lock); | 
|  | bio_list_merge(&ms->failures, &sync); | 
|  | spin_unlock_irq(&ms->lock); | 
|  | wakeup_mirrord(ms); | 
|  | } else | 
|  | while ((bio = bio_list_pop(&sync))) | 
|  | do_write(ms, bio); | 
|  |  | 
|  | while ((bio = bio_list_pop(&recover))) | 
|  | dm_rh_delay(ms->rh, bio); | 
|  |  | 
|  | while ((bio = bio_list_pop(&nosync))) { | 
|  | if (unlikely(ms->leg_failure) && errors_handled(ms)) { | 
|  | spin_lock_irq(&ms->lock); | 
|  | bio_list_add(&ms->failures, bio); | 
|  | spin_unlock_irq(&ms->lock); | 
|  | wakeup_mirrord(ms); | 
|  | } else { | 
|  | map_bio(get_default_mirror(ms), bio); | 
|  | generic_make_request(bio); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void do_failures(struct mirror_set *ms, struct bio_list *failures) | 
|  | { | 
|  | struct bio *bio; | 
|  |  | 
|  | if (likely(!failures->head)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * If the log has failed, unattempted writes are being | 
|  | * put on the holds list.  We can't issue those writes | 
|  | * until a log has been marked, so we must store them. | 
|  | * | 
|  | * If a 'noflush' suspend is in progress, we can requeue | 
|  | * the I/O's to the core.  This give userspace a chance | 
|  | * to reconfigure the mirror, at which point the core | 
|  | * will reissue the writes.  If the 'noflush' flag is | 
|  | * not set, we have no choice but to return errors. | 
|  | * | 
|  | * Some writes on the failures list may have been | 
|  | * submitted before the log failure and represent a | 
|  | * failure to write to one of the devices.  It is ok | 
|  | * for us to treat them the same and requeue them | 
|  | * as well. | 
|  | */ | 
|  | while ((bio = bio_list_pop(failures))) { | 
|  | if (!ms->log_failure) { | 
|  | ms->in_sync = 0; | 
|  | dm_rh_mark_nosync(ms->rh, bio); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If all the legs are dead, fail the I/O. | 
|  | * If we have been told to handle errors, hold the bio | 
|  | * and wait for userspace to deal with the problem. | 
|  | * Otherwise pretend that the I/O succeeded. (This would | 
|  | * be wrong if the failed leg returned after reboot and | 
|  | * got replicated back to the good legs.) | 
|  | */ | 
|  | if (!get_valid_mirror(ms)) | 
|  | bio_endio(bio, -EIO); | 
|  | else if (errors_handled(ms)) | 
|  | hold_bio(ms, bio); | 
|  | else | 
|  | bio_endio(bio, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void trigger_event(struct work_struct *work) | 
|  | { | 
|  | struct mirror_set *ms = | 
|  | container_of(work, struct mirror_set, trigger_event); | 
|  |  | 
|  | dm_table_event(ms->ti->table); | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------- | 
|  | * kmirrord | 
|  | *---------------------------------------------------------------*/ | 
|  | static void do_mirror(struct work_struct *work) | 
|  | { | 
|  | struct mirror_set *ms = container_of(work, struct mirror_set, | 
|  | kmirrord_work); | 
|  | struct bio_list reads, writes, failures; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&ms->lock, flags); | 
|  | reads = ms->reads; | 
|  | writes = ms->writes; | 
|  | failures = ms->failures; | 
|  | bio_list_init(&ms->reads); | 
|  | bio_list_init(&ms->writes); | 
|  | bio_list_init(&ms->failures); | 
|  | spin_unlock_irqrestore(&ms->lock, flags); | 
|  |  | 
|  | dm_rh_update_states(ms->rh, errors_handled(ms)); | 
|  | do_recovery(ms); | 
|  | do_reads(ms, &reads); | 
|  | do_writes(ms, &writes); | 
|  | do_failures(ms, &failures); | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------- | 
|  | * Target functions | 
|  | *---------------------------------------------------------------*/ | 
|  | static struct mirror_set *alloc_context(unsigned int nr_mirrors, | 
|  | uint32_t region_size, | 
|  | struct dm_target *ti, | 
|  | struct dm_dirty_log *dl) | 
|  | { | 
|  | size_t len; | 
|  | struct mirror_set *ms = NULL; | 
|  |  | 
|  | len = sizeof(*ms) + (sizeof(ms->mirror[0]) * nr_mirrors); | 
|  |  | 
|  | ms = kzalloc(len, GFP_KERNEL); | 
|  | if (!ms) { | 
|  | ti->error = "Cannot allocate mirror context"; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | spin_lock_init(&ms->lock); | 
|  | bio_list_init(&ms->reads); | 
|  | bio_list_init(&ms->writes); | 
|  | bio_list_init(&ms->failures); | 
|  | bio_list_init(&ms->holds); | 
|  |  | 
|  | ms->ti = ti; | 
|  | ms->nr_mirrors = nr_mirrors; | 
|  | ms->nr_regions = dm_sector_div_up(ti->len, region_size); | 
|  | ms->in_sync = 0; | 
|  | ms->log_failure = 0; | 
|  | ms->leg_failure = 0; | 
|  | atomic_set(&ms->suspend, 0); | 
|  | atomic_set(&ms->default_mirror, DEFAULT_MIRROR); | 
|  |  | 
|  | ms->read_record_pool = mempool_create_slab_pool(MIN_READ_RECORDS, | 
|  | _dm_raid1_read_record_cache); | 
|  |  | 
|  | if (!ms->read_record_pool) { | 
|  | ti->error = "Error creating mirror read_record_pool"; | 
|  | kfree(ms); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | ms->io_client = dm_io_client_create(); | 
|  | if (IS_ERR(ms->io_client)) { | 
|  | ti->error = "Error creating dm_io client"; | 
|  | mempool_destroy(ms->read_record_pool); | 
|  | kfree(ms); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | ms->rh = dm_region_hash_create(ms, dispatch_bios, wakeup_mirrord, | 
|  | wakeup_all_recovery_waiters, | 
|  | ms->ti->begin, MAX_RECOVERY, | 
|  | dl, region_size, ms->nr_regions); | 
|  | if (IS_ERR(ms->rh)) { | 
|  | ti->error = "Error creating dirty region hash"; | 
|  | dm_io_client_destroy(ms->io_client); | 
|  | mempool_destroy(ms->read_record_pool); | 
|  | kfree(ms); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return ms; | 
|  | } | 
|  |  | 
|  | static void free_context(struct mirror_set *ms, struct dm_target *ti, | 
|  | unsigned int m) | 
|  | { | 
|  | while (m--) | 
|  | dm_put_device(ti, ms->mirror[m].dev); | 
|  |  | 
|  | dm_io_client_destroy(ms->io_client); | 
|  | dm_region_hash_destroy(ms->rh); | 
|  | mempool_destroy(ms->read_record_pool); | 
|  | kfree(ms); | 
|  | } | 
|  |  | 
|  | static int get_mirror(struct mirror_set *ms, struct dm_target *ti, | 
|  | unsigned int mirror, char **argv) | 
|  | { | 
|  | unsigned long long offset; | 
|  |  | 
|  | if (sscanf(argv[1], "%llu", &offset) != 1) { | 
|  | ti->error = "Invalid offset"; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (dm_get_device(ti, argv[0], dm_table_get_mode(ti->table), | 
|  | &ms->mirror[mirror].dev)) { | 
|  | ti->error = "Device lookup failure"; | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | ms->mirror[mirror].ms = ms; | 
|  | atomic_set(&(ms->mirror[mirror].error_count), 0); | 
|  | ms->mirror[mirror].error_type = 0; | 
|  | ms->mirror[mirror].offset = offset; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Create dirty log: log_type #log_params <log_params> | 
|  | */ | 
|  | static struct dm_dirty_log *create_dirty_log(struct dm_target *ti, | 
|  | unsigned argc, char **argv, | 
|  | unsigned *args_used) | 
|  | { | 
|  | unsigned param_count; | 
|  | struct dm_dirty_log *dl; | 
|  |  | 
|  | if (argc < 2) { | 
|  | ti->error = "Insufficient mirror log arguments"; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | if (sscanf(argv[1], "%u", ¶m_count) != 1) { | 
|  | ti->error = "Invalid mirror log argument count"; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | *args_used = 2 + param_count; | 
|  |  | 
|  | if (argc < *args_used) { | 
|  | ti->error = "Insufficient mirror log arguments"; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | dl = dm_dirty_log_create(argv[0], ti, mirror_flush, param_count, | 
|  | argv + 2); | 
|  | if (!dl) { | 
|  | ti->error = "Error creating mirror dirty log"; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return dl; | 
|  | } | 
|  |  | 
|  | static int parse_features(struct mirror_set *ms, unsigned argc, char **argv, | 
|  | unsigned *args_used) | 
|  | { | 
|  | unsigned num_features; | 
|  | struct dm_target *ti = ms->ti; | 
|  |  | 
|  | *args_used = 0; | 
|  |  | 
|  | if (!argc) | 
|  | return 0; | 
|  |  | 
|  | if (sscanf(argv[0], "%u", &num_features) != 1) { | 
|  | ti->error = "Invalid number of features"; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | argc--; | 
|  | argv++; | 
|  | (*args_used)++; | 
|  |  | 
|  | if (num_features > argc) { | 
|  | ti->error = "Not enough arguments to support feature count"; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!strcmp("handle_errors", argv[0])) | 
|  | ms->features |= DM_RAID1_HANDLE_ERRORS; | 
|  | else { | 
|  | ti->error = "Unrecognised feature requested"; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | (*args_used)++; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Construct a mirror mapping: | 
|  | * | 
|  | * log_type #log_params <log_params> | 
|  | * #mirrors [mirror_path offset]{2,} | 
|  | * [#features <features>] | 
|  | * | 
|  | * log_type is "core" or "disk" | 
|  | * #log_params is between 1 and 3 | 
|  | * | 
|  | * If present, features must be "handle_errors". | 
|  | */ | 
|  | static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) | 
|  | { | 
|  | int r; | 
|  | unsigned int nr_mirrors, m, args_used; | 
|  | struct mirror_set *ms; | 
|  | struct dm_dirty_log *dl; | 
|  |  | 
|  | dl = create_dirty_log(ti, argc, argv, &args_used); | 
|  | if (!dl) | 
|  | return -EINVAL; | 
|  |  | 
|  | argv += args_used; | 
|  | argc -= args_used; | 
|  |  | 
|  | if (!argc || sscanf(argv[0], "%u", &nr_mirrors) != 1 || | 
|  | nr_mirrors < 2 || nr_mirrors > DM_KCOPYD_MAX_REGIONS + 1) { | 
|  | ti->error = "Invalid number of mirrors"; | 
|  | dm_dirty_log_destroy(dl); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | argv++, argc--; | 
|  |  | 
|  | if (argc < nr_mirrors * 2) { | 
|  | ti->error = "Too few mirror arguments"; | 
|  | dm_dirty_log_destroy(dl); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ms = alloc_context(nr_mirrors, dl->type->get_region_size(dl), ti, dl); | 
|  | if (!ms) { | 
|  | dm_dirty_log_destroy(dl); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* Get the mirror parameter sets */ | 
|  | for (m = 0; m < nr_mirrors; m++) { | 
|  | r = get_mirror(ms, ti, m, argv); | 
|  | if (r) { | 
|  | free_context(ms, ti, m); | 
|  | return r; | 
|  | } | 
|  | argv += 2; | 
|  | argc -= 2; | 
|  | } | 
|  |  | 
|  | ti->private = ms; | 
|  | ti->split_io = dm_rh_get_region_size(ms->rh); | 
|  | ti->num_flush_requests = 1; | 
|  | ti->num_discard_requests = 1; | 
|  |  | 
|  | ms->kmirrord_wq = alloc_workqueue("kmirrord", | 
|  | WQ_NON_REENTRANT | WQ_MEM_RECLAIM, 0); | 
|  | if (!ms->kmirrord_wq) { | 
|  | DMERR("couldn't start kmirrord"); | 
|  | r = -ENOMEM; | 
|  | goto err_free_context; | 
|  | } | 
|  | INIT_WORK(&ms->kmirrord_work, do_mirror); | 
|  | init_timer(&ms->timer); | 
|  | ms->timer_pending = 0; | 
|  | INIT_WORK(&ms->trigger_event, trigger_event); | 
|  |  | 
|  | r = parse_features(ms, argc, argv, &args_used); | 
|  | if (r) | 
|  | goto err_destroy_wq; | 
|  |  | 
|  | argv += args_used; | 
|  | argc -= args_used; | 
|  |  | 
|  | /* | 
|  | * Any read-balancing addition depends on the | 
|  | * DM_RAID1_HANDLE_ERRORS flag being present. | 
|  | * This is because the decision to balance depends | 
|  | * on the sync state of a region.  If the above | 
|  | * flag is not present, we ignore errors; and | 
|  | * the sync state may be inaccurate. | 
|  | */ | 
|  |  | 
|  | if (argc) { | 
|  | ti->error = "Too many mirror arguments"; | 
|  | r = -EINVAL; | 
|  | goto err_destroy_wq; | 
|  | } | 
|  |  | 
|  | ms->kcopyd_client = dm_kcopyd_client_create(); | 
|  | if (IS_ERR(ms->kcopyd_client)) { | 
|  | r = PTR_ERR(ms->kcopyd_client); | 
|  | goto err_destroy_wq; | 
|  | } | 
|  |  | 
|  | wakeup_mirrord(ms); | 
|  | return 0; | 
|  |  | 
|  | err_destroy_wq: | 
|  | destroy_workqueue(ms->kmirrord_wq); | 
|  | err_free_context: | 
|  | free_context(ms, ti, ms->nr_mirrors); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static void mirror_dtr(struct dm_target *ti) | 
|  | { | 
|  | struct mirror_set *ms = (struct mirror_set *) ti->private; | 
|  |  | 
|  | del_timer_sync(&ms->timer); | 
|  | flush_workqueue(ms->kmirrord_wq); | 
|  | flush_work_sync(&ms->trigger_event); | 
|  | dm_kcopyd_client_destroy(ms->kcopyd_client); | 
|  | destroy_workqueue(ms->kmirrord_wq); | 
|  | free_context(ms, ti, ms->nr_mirrors); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Mirror mapping function | 
|  | */ | 
|  | static int mirror_map(struct dm_target *ti, struct bio *bio, | 
|  | union map_info *map_context) | 
|  | { | 
|  | int r, rw = bio_rw(bio); | 
|  | struct mirror *m; | 
|  | struct mirror_set *ms = ti->private; | 
|  | struct dm_raid1_read_record *read_record = NULL; | 
|  | struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | 
|  |  | 
|  | if (rw == WRITE) { | 
|  | /* Save region for mirror_end_io() handler */ | 
|  | map_context->ll = dm_rh_bio_to_region(ms->rh, bio); | 
|  | queue_bio(ms, bio, rw); | 
|  | return DM_MAPIO_SUBMITTED; | 
|  | } | 
|  |  | 
|  | r = log->type->in_sync(log, dm_rh_bio_to_region(ms->rh, bio), 0); | 
|  | if (r < 0 && r != -EWOULDBLOCK) | 
|  | return r; | 
|  |  | 
|  | /* | 
|  | * If region is not in-sync queue the bio. | 
|  | */ | 
|  | if (!r || (r == -EWOULDBLOCK)) { | 
|  | if (rw == READA) | 
|  | return -EWOULDBLOCK; | 
|  |  | 
|  | queue_bio(ms, bio, rw); | 
|  | return DM_MAPIO_SUBMITTED; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The region is in-sync and we can perform reads directly. | 
|  | * Store enough information so we can retry if it fails. | 
|  | */ | 
|  | m = choose_mirror(ms, bio->bi_sector); | 
|  | if (unlikely(!m)) | 
|  | return -EIO; | 
|  |  | 
|  | read_record = mempool_alloc(ms->read_record_pool, GFP_NOIO); | 
|  | if (likely(read_record)) { | 
|  | dm_bio_record(&read_record->details, bio); | 
|  | map_context->ptr = read_record; | 
|  | read_record->m = m; | 
|  | } | 
|  |  | 
|  | map_bio(m, bio); | 
|  |  | 
|  | return DM_MAPIO_REMAPPED; | 
|  | } | 
|  |  | 
|  | static int mirror_end_io(struct dm_target *ti, struct bio *bio, | 
|  | int error, union map_info *map_context) | 
|  | { | 
|  | int rw = bio_rw(bio); | 
|  | struct mirror_set *ms = (struct mirror_set *) ti->private; | 
|  | struct mirror *m = NULL; | 
|  | struct dm_bio_details *bd = NULL; | 
|  | struct dm_raid1_read_record *read_record = map_context->ptr; | 
|  |  | 
|  | /* | 
|  | * We need to dec pending if this was a write. | 
|  | */ | 
|  | if (rw == WRITE) { | 
|  | if (!(bio->bi_rw & REQ_FLUSH)) | 
|  | dm_rh_dec(ms->rh, map_context->ll); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | if (error == -EOPNOTSUPP) | 
|  | goto out; | 
|  |  | 
|  | if ((error == -EWOULDBLOCK) && (bio->bi_rw & REQ_RAHEAD)) | 
|  | goto out; | 
|  |  | 
|  | if (unlikely(error)) { | 
|  | if (!read_record) { | 
|  | /* | 
|  | * There wasn't enough memory to record necessary | 
|  | * information for a retry or there was no other | 
|  | * mirror in-sync. | 
|  | */ | 
|  | DMERR_LIMIT("Mirror read failed."); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | m = read_record->m; | 
|  |  | 
|  | DMERR("Mirror read failed from %s. Trying alternative device.", | 
|  | m->dev->name); | 
|  |  | 
|  | fail_mirror(m, DM_RAID1_READ_ERROR); | 
|  |  | 
|  | /* | 
|  | * A failed read is requeued for another attempt using an intact | 
|  | * mirror. | 
|  | */ | 
|  | if (default_ok(m) || mirror_available(ms, bio)) { | 
|  | bd = &read_record->details; | 
|  |  | 
|  | dm_bio_restore(bd, bio); | 
|  | mempool_free(read_record, ms->read_record_pool); | 
|  | map_context->ptr = NULL; | 
|  | queue_bio(ms, bio, rw); | 
|  | return 1; | 
|  | } | 
|  | DMERR("All replicated volumes dead, failing I/O"); | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (read_record) { | 
|  | mempool_free(read_record, ms->read_record_pool); | 
|  | map_context->ptr = NULL; | 
|  | } | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static void mirror_presuspend(struct dm_target *ti) | 
|  | { | 
|  | struct mirror_set *ms = (struct mirror_set *) ti->private; | 
|  | struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | 
|  |  | 
|  | struct bio_list holds; | 
|  | struct bio *bio; | 
|  |  | 
|  | atomic_set(&ms->suspend, 1); | 
|  |  | 
|  | /* | 
|  | * Process bios in the hold list to start recovery waiting | 
|  | * for bios in the hold list. After the process, no bio has | 
|  | * a chance to be added in the hold list because ms->suspend | 
|  | * is set. | 
|  | */ | 
|  | spin_lock_irq(&ms->lock); | 
|  | holds = ms->holds; | 
|  | bio_list_init(&ms->holds); | 
|  | spin_unlock_irq(&ms->lock); | 
|  |  | 
|  | while ((bio = bio_list_pop(&holds))) | 
|  | hold_bio(ms, bio); | 
|  |  | 
|  | /* | 
|  | * We must finish up all the work that we've | 
|  | * generated (i.e. recovery work). | 
|  | */ | 
|  | dm_rh_stop_recovery(ms->rh); | 
|  |  | 
|  | wait_event(_kmirrord_recovery_stopped, | 
|  | !dm_rh_recovery_in_flight(ms->rh)); | 
|  |  | 
|  | if (log->type->presuspend && log->type->presuspend(log)) | 
|  | /* FIXME: need better error handling */ | 
|  | DMWARN("log presuspend failed"); | 
|  |  | 
|  | /* | 
|  | * Now that recovery is complete/stopped and the | 
|  | * delayed bios are queued, we need to wait for | 
|  | * the worker thread to complete.  This way, | 
|  | * we know that all of our I/O has been pushed. | 
|  | */ | 
|  | flush_workqueue(ms->kmirrord_wq); | 
|  | } | 
|  |  | 
|  | static void mirror_postsuspend(struct dm_target *ti) | 
|  | { | 
|  | struct mirror_set *ms = ti->private; | 
|  | struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | 
|  |  | 
|  | if (log->type->postsuspend && log->type->postsuspend(log)) | 
|  | /* FIXME: need better error handling */ | 
|  | DMWARN("log postsuspend failed"); | 
|  | } | 
|  |  | 
|  | static void mirror_resume(struct dm_target *ti) | 
|  | { | 
|  | struct mirror_set *ms = ti->private; | 
|  | struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | 
|  |  | 
|  | atomic_set(&ms->suspend, 0); | 
|  | if (log->type->resume && log->type->resume(log)) | 
|  | /* FIXME: need better error handling */ | 
|  | DMWARN("log resume failed"); | 
|  | dm_rh_start_recovery(ms->rh); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * device_status_char | 
|  | * @m: mirror device/leg we want the status of | 
|  | * | 
|  | * We return one character representing the most severe error | 
|  | * we have encountered. | 
|  | *    A => Alive - No failures | 
|  | *    D => Dead - A write failure occurred leaving mirror out-of-sync | 
|  | *    S => Sync - A sychronization failure occurred, mirror out-of-sync | 
|  | *    R => Read - A read failure occurred, mirror data unaffected | 
|  | * | 
|  | * Returns: <char> | 
|  | */ | 
|  | static char device_status_char(struct mirror *m) | 
|  | { | 
|  | if (!atomic_read(&(m->error_count))) | 
|  | return 'A'; | 
|  |  | 
|  | return (test_bit(DM_RAID1_FLUSH_ERROR, &(m->error_type))) ? 'F' : | 
|  | (test_bit(DM_RAID1_WRITE_ERROR, &(m->error_type))) ? 'D' : | 
|  | (test_bit(DM_RAID1_SYNC_ERROR, &(m->error_type))) ? 'S' : | 
|  | (test_bit(DM_RAID1_READ_ERROR, &(m->error_type))) ? 'R' : 'U'; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int mirror_status(struct dm_target *ti, status_type_t type, | 
|  | char *result, unsigned int maxlen) | 
|  | { | 
|  | unsigned int m, sz = 0; | 
|  | struct mirror_set *ms = (struct mirror_set *) ti->private; | 
|  | struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | 
|  | char buffer[ms->nr_mirrors + 1]; | 
|  |  | 
|  | switch (type) { | 
|  | case STATUSTYPE_INFO: | 
|  | DMEMIT("%d ", ms->nr_mirrors); | 
|  | for (m = 0; m < ms->nr_mirrors; m++) { | 
|  | DMEMIT("%s ", ms->mirror[m].dev->name); | 
|  | buffer[m] = device_status_char(&(ms->mirror[m])); | 
|  | } | 
|  | buffer[m] = '\0'; | 
|  |  | 
|  | DMEMIT("%llu/%llu 1 %s ", | 
|  | (unsigned long long)log->type->get_sync_count(log), | 
|  | (unsigned long long)ms->nr_regions, buffer); | 
|  |  | 
|  | sz += log->type->status(log, type, result+sz, maxlen-sz); | 
|  |  | 
|  | break; | 
|  |  | 
|  | case STATUSTYPE_TABLE: | 
|  | sz = log->type->status(log, type, result, maxlen); | 
|  |  | 
|  | DMEMIT("%d", ms->nr_mirrors); | 
|  | for (m = 0; m < ms->nr_mirrors; m++) | 
|  | DMEMIT(" %s %llu", ms->mirror[m].dev->name, | 
|  | (unsigned long long)ms->mirror[m].offset); | 
|  |  | 
|  | if (ms->features & DM_RAID1_HANDLE_ERRORS) | 
|  | DMEMIT(" 1 handle_errors"); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mirror_iterate_devices(struct dm_target *ti, | 
|  | iterate_devices_callout_fn fn, void *data) | 
|  | { | 
|  | struct mirror_set *ms = ti->private; | 
|  | int ret = 0; | 
|  | unsigned i; | 
|  |  | 
|  | for (i = 0; !ret && i < ms->nr_mirrors; i++) | 
|  | ret = fn(ti, ms->mirror[i].dev, | 
|  | ms->mirror[i].offset, ti->len, data); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct target_type mirror_target = { | 
|  | .name	 = "mirror", | 
|  | .version = {1, 12, 1}, | 
|  | .module	 = THIS_MODULE, | 
|  | .ctr	 = mirror_ctr, | 
|  | .dtr	 = mirror_dtr, | 
|  | .map	 = mirror_map, | 
|  | .end_io	 = mirror_end_io, | 
|  | .presuspend = mirror_presuspend, | 
|  | .postsuspend = mirror_postsuspend, | 
|  | .resume	 = mirror_resume, | 
|  | .status	 = mirror_status, | 
|  | .iterate_devices = mirror_iterate_devices, | 
|  | }; | 
|  |  | 
|  | static int __init dm_mirror_init(void) | 
|  | { | 
|  | int r; | 
|  |  | 
|  | _dm_raid1_read_record_cache = KMEM_CACHE(dm_raid1_read_record, 0); | 
|  | if (!_dm_raid1_read_record_cache) { | 
|  | DMERR("Can't allocate dm_raid1_read_record cache"); | 
|  | r = -ENOMEM; | 
|  | goto bad_cache; | 
|  | } | 
|  |  | 
|  | r = dm_register_target(&mirror_target); | 
|  | if (r < 0) { | 
|  | DMERR("Failed to register mirror target"); | 
|  | goto bad_target; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | bad_target: | 
|  | kmem_cache_destroy(_dm_raid1_read_record_cache); | 
|  | bad_cache: | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static void __exit dm_mirror_exit(void) | 
|  | { | 
|  | dm_unregister_target(&mirror_target); | 
|  | kmem_cache_destroy(_dm_raid1_read_record_cache); | 
|  | } | 
|  |  | 
|  | /* Module hooks */ | 
|  | module_init(dm_mirror_init); | 
|  | module_exit(dm_mirror_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION(DM_NAME " mirror target"); | 
|  | MODULE_AUTHOR("Joe Thornber"); | 
|  | MODULE_LICENSE("GPL"); |