blob: 774c3c26671379a30ef8c3f4e0aec1c57ee3efec [file] [log] [blame]
/*
* Copyright © 2009 - Maxim Levitsky
* Common routines & support for xD format
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/mtd/nand.h>
#include <linux/module.h>
#include "sm_common.h"
static struct nand_ecclayout nand_oob_sm = {
.eccbytes = 6,
.eccpos = {8, 9, 10, 13, 14, 15},
.oobfree = {
{.offset = 0 , .length = 4}, /* reserved */
{.offset = 6 , .length = 2}, /* LBA1 */
{.offset = 11, .length = 2} /* LBA2 */
}
};
/* NOTE: This layout is is not compatabable with SmartMedia, */
/* because the 256 byte devices have page depenent oob layout */
/* However it does preserve the bad block markers */
/* If you use smftl, it will bypass this and work correctly */
/* If you not, then you break SmartMedia compliance anyway */
static struct nand_ecclayout nand_oob_sm_small = {
.eccbytes = 3,
.eccpos = {0, 1, 2},
.oobfree = {
{.offset = 3 , .length = 2}, /* reserved */
{.offset = 6 , .length = 2}, /* LBA1 */
}
};
static int sm_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
struct mtd_oob_ops ops;
struct sm_oob oob;
int ret, error = 0;
memset(&oob, -1, SM_OOB_SIZE);
oob.block_status = 0x0F;
/* As long as this function is called on erase block boundaries
it will work correctly for 256 byte nand */
ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
ops.oobbuf = (void *)&oob;
ops.datbuf = NULL;
ret = mtd_write_oob(mtd, ofs, &ops);
if (ret < 0 || ops.oobretlen != SM_OOB_SIZE) {
printk(KERN_NOTICE
"sm_common: can't mark sector at %i as bad\n",
(int)ofs);
error = -EIO;
} else
mtd->ecc_stats.badblocks++;
return error;
}
static struct nand_flash_dev nand_smartmedia_flash_ids[] = {
{"SmartMedia 1MiB 5V", 0x6e, 256, 1, 0x1000, 0},
{"SmartMedia 1MiB 3,3V", 0xe8, 256, 1, 0x1000, 0},
{"SmartMedia 1MiB 3,3V", 0xec, 256, 1, 0x1000, 0},
{"SmartMedia 2MiB 3,3V", 0xea, 256, 2, 0x1000, 0},
{"SmartMedia 2MiB 5V", 0x64, 256, 2, 0x1000, 0},
{"SmartMedia 2MiB 3,3V ROM", 0x5d, 512, 2, 0x2000, NAND_ROM},
{"SmartMedia 4MiB 3,3V", 0xe3, 512, 4, 0x2000, 0},
{"SmartMedia 4MiB 3,3/5V", 0xe5, 512, 4, 0x2000, 0},
{"SmartMedia 4MiB 5V", 0x6b, 512, 4, 0x2000, 0},
{"SmartMedia 4MiB 3,3V ROM", 0xd5, 512, 4, 0x2000, NAND_ROM},
{"SmartMedia 8MiB 3,3V", 0xe6, 512, 8, 0x2000, 0},
{"SmartMedia 8MiB 3,3V ROM", 0xd6, 512, 8, 0x2000, NAND_ROM},
{"SmartMedia 16MiB 3,3V", 0x73, 512, 16, 0x4000, 0},
{"SmartMedia 16MiB 3,3V ROM", 0x57, 512, 16, 0x4000, NAND_ROM},
{"SmartMedia 32MiB 3,3V", 0x75, 512, 32, 0x4000, 0},
{"SmartMedia 32MiB 3,3V ROM", 0x58, 512, 32, 0x4000, NAND_ROM},
{"SmartMedia 64MiB 3,3V", 0x76, 512, 64, 0x4000, 0},
{"SmartMedia 64MiB 3,3V ROM", 0xd9, 512, 64, 0x4000, NAND_ROM},
{"SmartMedia 128MiB 3,3V", 0x79, 512, 128, 0x4000, 0},
{"SmartMedia 128MiB 3,3V ROM", 0xda, 512, 128, 0x4000, NAND_ROM},
{"SmartMedia 256MiB 3,3V", 0x71, 512, 256, 0x4000 },
{"SmartMedia 256MiB 3,3V ROM", 0x5b, 512, 256, 0x4000, NAND_ROM},
{NULL,}
};
#define XD_TYPEM (NAND_NO_AUTOINCR | NAND_BROKEN_XD)
static struct nand_flash_dev nand_xd_flash_ids[] = {
{"xD 16MiB 3,3V", 0x73, 512, 16, 0x4000, 0},
{"xD 32MiB 3,3V", 0x75, 512, 32, 0x4000, 0},
{"xD 64MiB 3,3V", 0x76, 512, 64, 0x4000, 0},
{"xD 128MiB 3,3V", 0x79, 512, 128, 0x4000, 0},
{"xD 256MiB 3,3V", 0x71, 512, 256, 0x4000, XD_TYPEM},
{"xD 512MiB 3,3V", 0xdc, 512, 512, 0x4000, XD_TYPEM},
{"xD 1GiB 3,3V", 0xd3, 512, 1024, 0x4000, XD_TYPEM},
{"xD 2GiB 3,3V", 0xd5, 512, 2048, 0x4000, XD_TYPEM},
{NULL,}
};
int sm_register_device(struct mtd_info *mtd, int smartmedia)
{
struct nand_chip *chip = mtd->priv;
int ret;
chip->options |= NAND_SKIP_BBTSCAN;
/* Scan for card properties */
ret = nand_scan_ident(mtd, 1, smartmedia ?
nand_smartmedia_flash_ids : nand_xd_flash_ids);
if (ret)
return ret;
/* Bad block marker position */
chip->badblockpos = 0x05;
chip->badblockbits = 7;
chip->block_markbad = sm_block_markbad;
/* ECC layout */
if (mtd->writesize == SM_SECTOR_SIZE)
chip->ecc.layout = &nand_oob_sm;
else if (mtd->writesize == SM_SMALL_PAGE)
chip->ecc.layout = &nand_oob_sm_small;
else
return -ENODEV;
ret = nand_scan_tail(mtd);
if (ret)
return ret;
return mtd_device_register(mtd, NULL, 0);
}
EXPORT_SYMBOL_GPL(sm_register_device);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>");
MODULE_DESCRIPTION("Common SmartMedia/xD functions");