blob: 977daedc14c06e486242751cb293cfb62306e980 [file] [log] [blame]
/*
* arch/ppc/boot/common/mpc10x_common.c
*
* A routine to find out how much memory the machine has.
*
* Based on:
* arch/ppc/kernel/mpc10x_common.c
*
* Author: Mark A. Greer
* mgreer@mvista.com
*
* 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/pci.h>
#include <asm/types.h>
#include <asm/io.h>
#include "mpc10x.h"
/*
* *** WARNING - A BAT MUST be set to access the PCI config addr/data regs ***
*/
/*
* PCI config space macros, similar to indirect_xxx and early_xxx macros.
* We assume bus 0.
*/
#define MPC10X_CFG_read(val, addr, type, op) *val = op((type)(addr))
#define MPC10X_CFG_write(val, addr, type, op) op((type *)(addr), (val))
#define MPC10X_PCI_OP(rw, size, type, op, mask) \
static void \
mpc10x_##rw##_config_##size(unsigned int *cfg_addr, \
unsigned int *cfg_data, int devfn, int offset, \
type val) \
{ \
out_be32(cfg_addr, \
((offset & 0xfc) << 24) | (devfn << 16) \
| (0 << 8) | 0x80); \
MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op); \
return; \
}
MPC10X_PCI_OP(read, byte, u8 *, in_8, 3)
MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0)
/*
* Read the memory controller registers to determine the amount of memory in
* the system. This assumes that the firmware has correctly set up the memory
* controller registers. On CONFIG_PPC_PREP, we know we are being called
* under a PReP memory map. On all other machines, we assume we are under
* a CHRP memory map. Further, on CONFIG_PPC_MULTIPLATFORM we must rename
* this function.
*/
#ifdef CONFIG_PPC_MULTIPLATFORM
#define get_mem_size mpc10x_get_mem_size
#endif
unsigned long
get_mem_size(void)
{
unsigned int *config_addr, *config_data, val;
unsigned long start, end, total, offset;
int i;
unsigned char bank_enables;
#ifdef CONFIG_PPC_PREP
config_addr = (unsigned int *)MPC10X_MAPA_CNFG_ADDR;
config_data = (unsigned int *)MPC10X_MAPA_CNFG_DATA;
#else
config_addr = (unsigned int *)MPC10X_MAPB_CNFG_ADDR;
config_data = (unsigned int *)MPC10X_MAPB_CNFG_DATA;
#endif
mpc10x_read_config_byte(config_addr, config_data, PCI_DEVFN(0,0),
MPC10X_MCTLR_MEM_BANK_ENABLES, &bank_enables);
total = 0;
for (i = 0; i < 8; i++) {
if (bank_enables & (1 << i)) {
offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
mpc10x_read_config_dword(config_addr, config_data,
PCI_DEVFN(0,0), offset, &val);
start = (val >> ((i & 3) << 3)) & 0xff;
offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
mpc10x_read_config_dword(config_addr, config_data,
PCI_DEVFN(0,0), offset, &val);
val = (val >> ((i & 3) << 3)) & 0x03;
start = (val << 28) | (start << 20);
offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
mpc10x_read_config_dword(config_addr, config_data,
PCI_DEVFN(0,0), offset, &val);
end = (val >> ((i & 3) << 3)) & 0xff;
offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
mpc10x_read_config_dword(config_addr, config_data,
PCI_DEVFN(0,0), offset, &val);
val = (val >> ((i & 3) << 3)) & 0x03;
end = (val << 28) | (end << 20) | 0xfffff;
total += (end - start + 1);
}
}
return total;
}